aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-30net/mlx5e: Fix q counters on uplink representorsRoi Dayan1-7/+2
Need to allocate the q counters before init_rx which needs them when creating the rq. Fixes: 8520fa57a4e9 ("net/mlx5e: Create q counters on uplink representors") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: Fix command entry leak in Internal Error StateMoshe Shemesh1-0/+4
Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: Fix forced completion access non initialized command entryMoshe Shemesh1-1/+1
mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: DR, On creation set CQ's arm_db member to right valueErez Shitrit1-1/+13
In polling mode, set arm_db member to a value that will avoid CQ event recovery by the HW. Otherwise we might get event without completion function. In addition,empty completion function to was added to protect from unexpected events. Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Erez Shitrit <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: E-switch, Fix mutex init orderParav Pandit1-6/+6
In cited patch mutex is initialized after its used. Below call trace is observed. Fix the order to initialize the mutex early enough. Similarly follow mirror sequence during cleanup. kernel: DEBUG_LOCKS_WARN_ON(lock->magic != lock) kernel: WARNING: CPU: 5 PID: 45916 at kernel/locking/mutex.c:938 __mutex_lock+0x7d6/0x8a0 kernel: Call Trace: kernel: ? esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mark_held_locks+0x55/0x70 kernel: ? __slab_free+0x274/0x400 kernel: ? lockdep_hardirqs_on+0x140/0x1d0 kernel: esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mlx5_esw_chains_create_fdb_prio+0xa57/0xc20 [mlx5_core] kernel: mlx5_esw_vport_tbl_get+0x88/0xf0 [mlx5_core] kernel: mlx5_esw_chains_create+0x2f3/0x3e0 [mlx5_core] kernel: esw_create_offloads_fdb_tables+0x11d/0x580 [mlx5_core] kernel: esw_offloads_enable+0x26d/0x540 [mlx5_core] kernel: mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] kernel: mlx5_devlink_eswitch_mode_set+0x1af/0x320 [mlx5_core] kernel: devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: E-switch, Fix printing wrong error valueParav Pandit1-1/+1
When mlx5_modify_header_alloc() fails, instead of printing the error value returned, current error log prints 0. Fix by printing correct error value returned by mlx5_modify_header_alloc(). Fixes: 6724e66b90ee ("net/mlx5: E-Switch, Get reg_c1 value on miss") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30net/mlx5: E-switch, Fix error unwinding flow for steering init failureParav Pandit1-2/+2
Error unwinding is done incorrectly in the cited commit. When steering init fails, there is no need to perform steering cleanup. When vport error exists, error cleanup should be mirror of the setup routine, i.e. to perform steering cleanup before metadata cleanup. This avoids the call trace in accessing uninitialized objects which are skipped during steering_init() due to failure in steering_init(). Call trace: mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header actions 1, max supported 0 E-Switch: Failed to create restore mod header BUG: kernel NULL pointer dereference, address: 00000000000000d0 [ 677.263079] mlx5_destroy_flow_group+0x13/0x80 [mlx5_core] [ 677.268921] esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core] [ 677.275281] esw_offloads_enable+0x1a5/0x800 [mlx5_core] [ 677.280949] mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] [ 677.287227] mlx5_devlink_eswitch_mode_set+0x1af/0x320 [ 677.293741] devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 [ 677.299217] genl_rcv_msg+0x1eb/0x430 Fixes: 7983a675ba65 ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-30Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7Jens Axboe1-0/+2
Pull NVMe fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme: prevent double free in nvme_alloc_ns() error handling
2020-04-30fibmap: Warn and return an error in case of block > INT_MAXRitesh Harjani2-4/+9
We better warn the fibmap user and not return a truncated and therefore an incorrect block map address if the bmap() returned block address is greater than INT_MAX (since user supplied integer pointer). It's better to pr_warn() all user of ioctl_fibmap() and return a proper error code rather than silently letting a FS corruption happen if the user tries to fiddle around with the returned block map address. We fix this by returning an error code of -ERANGE and returning 0 as the block mapping address in case if it is > INT_MAX. Now iomap_bmap() could be called from either of these two paths. Either when a user is calling an ioctl_fibmap() interface to get the block mapping address or by some filesystem via use of bmap() internal kernel API. bmap() kernel API is well equipped with handling of u64 addresses. WARN condition in iomap_bmap_actor() was mainly added to warn all the fibmap users. But now that we have directly added this warning for all fibmap users and also made sure to return 0 as block map address in case if addr > INT_MAX. So we can now remove this logic from iomap_bmap_actor(). Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-04-30bpf: Fix error return code in map_lookup_and_delete_elem()Wei Yongjun1-1/+3
Fix to return negative error code -EFAULT from the copy_to_user() error handling case instead of 0, as done elsewhere in this function. Fixes: bd513cd08f10 ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-04-30dma-buf: fix documentation build warningsRandy Dunlap2-4/+3
Fix documentation warnings in dma-buf.[hc]: ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach' ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach' ../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify Signed-off-by: Randy Dunlap <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sumit Semwal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-30i2c: aspeed: Avoid i2c interrupt status clear race condition.ryan_chen1-1/+4
In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <[email protected]>
2020-04-30i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handlingDan Carpenter1-1/+1
The problem is that we dereference "privdata->pci_dev" when we print the error messages in amd_mp2_pci_init(): dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n"); ^^^^^^^^^^^^^^^^^ Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2020-04-30ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB IDTakashi Iwai1-1/+1
The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0. Fixes: f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-30btrfs: fix gcc-4.8 build warning for struct initializerArnd Bergmann1-1/+1
Some older compilers like gcc-4.8 warn about mismatched curly braces in a initializer: fs/btrfs/backref.c: In function 'is_shared_data_backref': fs/btrfs/backref.c:394:9: error: missing braces around initializer [-Werror=missing-braces] struct prelim_ref target = {0}; ^ fs/btrfs/backref.c:394:9: error: (near initialization for 'target.rbnode') [-Werror=missing-braces] Use the GNU empty initializer extension to avoid this. Fixes: ed58f2e66e84 ("btrfs: backref, don't add refs from shared block when resolving normal backref") Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-04-30ALSA: opti9xx: shut up gcc-10 range warningArnd Bergmann2-6/+12
gcc-10 points out a few instances of suspicious integer arithmetic leading to value truncation: sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure': sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask' 351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c: In function 'snd_miro_configure': sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask' 1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~ These are all harmless here as only the low 8 bit are passed down anyway. Change the macros to inline functions to make the code more readable and also avoid the warning. Strictly speaking those functions also need locking to make the read/write pair atomic, but it seems unlikely that anyone would still run into that issue. Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver") Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-30crypto: arch/nhpoly1305 - process in explicit 4k chunksJason A. Donenfeld4-4/+4
Rather than chunking via PAGE_SIZE, this commit changes the arch implementations to chunk in explicit 4k parts, so that calculations on maximum acceptable latency don't suddenly become invalid on platforms where PAGE_SIZE isn't 4k, such as arm64. Fixes: 0f961f9f670e ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305") Fixes: 012c82388c03 ("crypto: x86/nhpoly1305 - add SSE2 accelerated NHPoly1305") Fixes: a00fa0c88774 ("crypto: arm64/nhpoly1305 - add NEON-accelerated NHPoly1305") Fixes: 16aae3595a9d ("crypto: arm/nhpoly1305 - add NEON-accelerated NHPoly1305") Cc: [email protected] Signed-off-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-04-30crypto: arch/lib - limit simd usage to 4k chunksJason A. Donenfeld7-30/+65
The initial Zinc patchset, after some mailing list discussion, contained code to ensure that kernel_fpu_enable would not be kept on for more than a 4k chunk, since it disables preemption. The choice of 4k isn't totally scientific, but it's not a bad guess either, and it's what's used in both the x86 poly1305, blake2s, and nhpoly1305 code already (in the form of PAGE_SIZE, which this commit corrects to be explicitly 4k for the former two). Ard did some back of the envelope calculations and found that at 5 cycles/byte (overestimate) on a 1ghz processor (pretty slow), 4k means we have a maximum preemption disabling of 20us, which Sebastian confirmed was probably a good limit. Unfortunately the chunking appears to have been left out of the final patchset that added the glue code. So, this commit adds it back in. Fixes: 84e03fa39fbe ("crypto: x86/chacha - expose SIMD ChaCha routine as library function") Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function") Fixes: a44a3430d71b ("crypto: arm/chacha - expose ARM ChaCha routine as library function") Fixes: d7d7b8535662 ("crypto: x86/poly1305 - wire up faster implementations for kernel") Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: a6b803b3ddc7 ("crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: ed0356eda153 ("crypto: blake2s - x86_64 SIMD implementation") Cc: Eric Biggers <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: [email protected] Signed-off-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-04-29Merge branch 'wireguard-fixes'David S. Miller3-6/+5
Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc4 This series contains two fixes and a cleanup for wireguard: 1) Removal of a spurious newline, from Sultan Alsawaf. 2) Fix for a memory leak in an error path, in which memory allocated prior to the error wasn't freed, reported by Sultan Alsawaf. 3) Fix to ECN support to use RFC6040 properly like all the other tunnel drivers, from Toke Høiland-Jørgensen. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-04-29wireguard: receive: use tunnel helpers for decapsulating ECN markingsToke Høiland-Jørgensen1-4/+2
WireGuard currently only propagates ECN markings on tunnel decap according to the old RFC3168 specification. However, the spec has since been updated in RFC6040 to recommend slightly different decapsulation semantics. This was implemented in the kernel as a set of common helpers for ECN decapsulation, so let's just switch over WireGuard to using those, so it can benefit from this enhancement and any future tweaks. We do not drop packets with invalid ECN marking combinations, because WireGuard is frequently used to work around broken ISPs, which could be doing that. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: Olivier Tilmans <[email protected]> Cc: Dave Taht <[email protected]> Cc: Rodney W. Grimes <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29wireguard: queueing: cleanup ptr_ring in error path of packet_queue_initJason A. Donenfeld1-1/+3
Prior, if the alloc_percpu of packet_percpu_multicore_worker_alloc failed, the previously allocated ptr_ring wouldn't be freed. This commit adds the missing call to ptr_ring_cleanup in the error case. Reported-by: Sultan Alsawaf <[email protected]> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29wireguard: send: remove errant newline from packet_encrypt_workerSultan Alsawaf1-1/+0
This commit removes a useless newline at the end of a scope, which doesn't add anything in the way of organization or readability. Signed-off-by: Sultan Alsawaf <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before ↵Gwendal Grignou3-61/+93
claiming sensors Allocate callbacks array before enumerating the sensors: The probe routine for these sensors (for instance cros_ec_sensors_probe) can be called within the sensorhub probe routine (cros_ec_sensors_probe()) Fixes: 145d59baff594 ("platform/chrome: cros_ec_sensorhub: Add FIFO support") Signed-off-by: Gwendal Grignou <[email protected]> Reported-by: Douglas Anderson <[email protected]> Tested-by: Douglas Anderson <[email protected]> Signed-off-by: Enric Balletbo i Serra <[email protected]>
2020-04-29HID: mcp2221: add gpiolib dependencyArnd Bergmann1-0/+1
Without gpiolib, this driver fails to link: arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe': hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data' arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get': hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data' Fixes: 328de1c519c5 ("HID: mcp2221: add GPIO functionality support") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Rishi Gupta <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29HID: i2c-hid: reset Synaptics SYNA2393 on resumeDaniel Playfair Cal2-0/+5
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29HID: wacom: Report 2nd-gen Intuos Pro S center button status over BTJason Gerecke1-3/+6
The state of the center button was not reported to userspace for the 2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling code not being updated to support its reduced number of buttons. This patch uses the actual number of buttons present on the tablet to assemble a button state bitmap. Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112 Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support") Signed-off-by: Jason Gerecke <[email protected]> Cc: [email protected] # v5.3+ Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29mptcp: replace mptcp_disconnect with a stubFlorian Westphal1-5/+6
Paolo points out that mptcp_disconnect is bogus: "lock_sock(sk); looks suspicious (lock should be already held by the caller) And call to: tcp_disconnect(sk, flags); too, sk is not a tcp socket". ->disconnect() gets called from e.g. inet_stream_connect when one tries to disassociate a connected socket again (to re-connect without closing the socket first). MPTCP however uses mptcp_stream_connect, not inet_stream_connect, for the mptcp-socket connect call. inet_stream_connect only gets called indirectly, for the tcp socket, so any ->disconnect() calls end up calling tcp_disconnect for that tcp subflow sk. This also explains why syzkaller has not yet reported a problem here. So for now replace this with a stub that doesn't do anything. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/14 Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29netfilter: nf_osf: avoid passing pointer to local varArnd Bergmann1-5/+7
gcc-10 points out that a code path exists where a pointer to a stack variable may be passed back to the caller: net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init': cc1: warning: function may return address of local variable [-Wreturn-local-addr] net/netfilter/nfnetlink_osf.c:171:16: note: declared here 171 | struct tcphdr _tcph; | ^~~~~ I am not sure whether this can happen in practice, but moving the variable declaration into the callers avoids the problem. Fixes: 31a9c29210e2 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-04-29net: dsa: mv88e6xxx: remove duplicate assignment of struct membersJason Yan1-4/+0
These struct members named 'phylink_validate' was assigned twice: static const struct mv88e6xxx_ops mv88e6190_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6190x_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390x_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6191_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6290_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; Remove all the first one and leave the second one which are been used in fact. Be aware that for 'mv88e6190x_ops' the assignment functions is different while the others are all the same. This fixes the following coccicheck warning: drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first occurrence line 3965, second occurrence line 3967 drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first occurrence line 4024, second occurrence line 4026 drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first occurrence line 4082, second occurrence line 4085 drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first occurrence line 4238, second occurrence line 4242 Fixes: 4262c38dc42e ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members") Signed-off-by: Jason Yan <[email protected]> Reviewed-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-29Merge tag 'riscv-for-linus-5.7-rc4' of ↵Linus Torvalds6-15/+18
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes. Specifically: - fix linker argument to allow linking with lld - build fix for configurations without a frame pointer - a handful of build fixes related the SBI 0.1 vs 0.2 split - remove STRICT_KERNEL_RWX for !MMU, which isn't useful" * tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU riscv: sbi: Fix undefined reference to sbi_shutdown tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export riscv: fix vdso build with lld RISC-V: stacktrace: Declare sp_in_global outside ifdef
2020-04-29Merge branch 'linus' of ↵Linus Torvalds3-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a bunch of bugs detected by KASAN in the caam driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix the address of the last entry of S/G crypto: caam - fix use-after-free KASAN issue for RSA algorithms crypto: caam - fix use-after-free KASAN issue for HASH algorithms crypto: caam - fix use-after-free KASAN issue for AEAD algorithms crypto: caam - fix use-after-free KASAN issue for SKCIPHER algorithms
2020-04-29HID: usbhid: Fix race between usbhid_close() and usbhid_stop()Alan Stern2-8/+30
The syzbot fuzzer discovered a bad race between in the usbhid driver between usbhid_stop() and usbhid_close(). In particular, usbhid_stop() does: usb_free_urb(usbhid->urbin); ... usbhid->urbin = NULL; /* don't mess up next start */ and usbhid_close() does: usb_kill_urb(usbhid->urbin); with no mutual exclusion. If the two routines happen to run concurrently so that usb_kill_urb() is called in between the usb_free_urb() and the NULL assignment, it will access the deallocated urb structure -- a use-after-free bug. This patch adds a mutex to the usbhid private structure and uses it to enforce mutual exclusion of the usbhid_start(), usbhid_stop(), usbhid_open() and usbhid_close() callbacks. Reported-and-tested-by: [email protected] Signed-off-by: Alan Stern <[email protected]> CC: <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2020-04-29iommu: spapr_tce: Disable compile testing to fix build on book3s_32 configKrzysztof Kozlowski1-1/+1
Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC configurations, its presence makes arch/powerpc/kvm/Makefile to select modules which do not build in such configuration. The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists only with CONFIG_PPC_BOOK3S_64. However these modules are selected when COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures: In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0, from arch/powerpc/kvm/book3s_64_vio_hv.c:22: arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror] #define _PAGE_EXEC 0x00001 /* execute permission */ In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0, from arch/powerpc/include/asm/book3s/pgtable.h:8, from arch/powerpc/include/asm/pgtable.h:18, from include/linux/mm.h:95, from arch/powerpc/include/asm/io.h:29, from include/linux/io.h:13, from include/linux/irq.h:20, from arch/powerpc/include/asm/hardirq.h:6, from include/linux/hardirq.h:9, from include/linux/kvm_host.h:7, from arch/powerpc/kvm/book3s_64_vio_hv.c:12: arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition #define _PAGE_EXEC 0x200 /* software: exec allowed */ Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-04-29iommu/mediatek: Fix MTK_IOMMU dependenciesGeert Uytterhoeven1-1/+1
If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config): drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap': dma-iommu.c:(.text+0x836): undefined reference to `dma_pgprot' IOMMU_DMA must not be selected, unless HAS_DMA=y. Hence fix this by making MTK_IOMMU depend on HAS_DMA. While at it, remove the dependency on ARM || ARM64, as that is already implied by the dependency on ARCH_MEDIATEK. Fixes: e93a1695d7fb5513 ("iommu: Enable compile testing for some of drivers") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-04-29iommu: Fix the memory leak in dev_iommu_free()Kevin Hao1-0/+1
In iommu_probe_device(), we would invoke dev_iommu_free() to free the dev->iommu after the ->add_device() returns failure. But after commit 72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu"), we also need to free the iommu_fwspec before the dev->iommu is freed. This fixes the following memory leak reported by kmemleak: unreferenced object 0xffff000bc836c700 (size 128): comm "swapper/0", pid 1, jiffies 4294896304 (age 782.120s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 d8 cd 9b ff 0b 00 ff ff ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000df34077b>] kmem_cache_alloc_trace+0x244/0x4b0 [<000000000e560ac0>] iommu_fwspec_init+0x7c/0xb0 [<0000000075eda275>] of_iommu_xlate+0x80/0xe8 [<00000000728d6bf9>] of_pci_iommu_init+0xb0/0xb8 [<00000000d001fe6f>] pci_for_each_dma_alias+0x48/0x190 [<000000006db6bbce>] of_iommu_configure+0x1ac/0x1d0 [<00000000634745f8>] of_dma_configure+0xdc/0x220 [<000000002cbc8ba0>] pci_dma_configure+0x50/0x78 [<00000000cdf6e193>] really_probe+0x8c/0x340 [<00000000fddddc46>] driver_probe_device+0x60/0xf8 [<0000000061bcdb51>] __device_attach_driver+0x8c/0xd0 [<000000009b9ff58e>] bus_for_each_drv+0x80/0xd0 [<000000004b9c8aa3>] __device_attach+0xec/0x148 [<00000000a5c13bf3>] device_attach+0x1c/0x28 [<000000005071e151>] pci_bus_add_device+0x58/0xd0 [<000000002d4f87d1>] pci_bus_add_devices+0x40/0x90 Fixes: 72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu") Signed-off-by: Kevin Hao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-04-29drm/qxl: qxl_release use after freeVasily Averin4-11/+7
qxl_release should not be accesses after qxl_push_*_ring_release() calls: userspace driver can process submitted command quickly, move qxl_release into release_ring, generate interrupt and trigger garbage collector. It can lead to crashes in qxl driver or trigger memory corruption in some kmalloc-192 slab object Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() + qxl_push_{cursor,command}_ring_release() calls to close that race window. cc: [email protected] Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)") Signed-off-by: Vasily Averin <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-04-29drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()Vasily Averin1-1/+2
v2: removed TODO reminder Signed-off-by: Vasily Averin <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-04-29ALSA: hda/hdmi: fix without unlocked before returnWu Bo1-1/+3
Fix the following coccicheck warning: sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846 After add sanity check to pass klockwork check, The spdif_mutex should be unlock before return true in check_non_pcm_per_cvt(). Fixes: 960a581e22d9 ("ALSA: hda: fix some klockwork scan warnings") Signed-off-by: Wu Bo <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-28dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpathGabriel Krisman Bertazi1-2/+4
When adding devices that don't have a scsi_dh on a BIO based multipath, I was able to consistently hit the warning below and lock-up the system. The problem is that __map_bio reads the flag before it potentially being modified by choose_pgpath, and ends up using the older value. The WARN_ON below is not trivially linked to the issue. It goes like this: The activate_path delayed_work is not initialized for non-scsi_dh devices, but we always set MPATHF_QUEUE_IO, asking for initialization. That is fine, since MPATHF_QUEUE_IO would be cleared in choose_pgpath. Nevertheless, only for BIO-based mpath, we cache the flag before calling choose_pgpath, and use the older version when deciding if we should initialize the path. Therefore, we end up trying to initialize the paths, and calling the non-initialized activate_path work. [ 82.437100] ------------[ cut here ]------------ [ 82.437659] WARNING: CPU: 3 PID: 602 at kernel/workqueue.c:1624 __queue_delayed_work+0x71/0x90 [ 82.438436] Modules linked in: [ 82.438911] CPU: 3 PID: 602 Comm: systemd-udevd Not tainted 5.6.0-rc6+ #339 [ 82.439680] RIP: 0010:__queue_delayed_work+0x71/0x90 [ 82.440287] Code: c1 48 89 4a 50 81 ff 00 02 00 00 75 2a 4c 89 cf e9 94 d6 07 00 e9 7f e9 ff ff 0f 0b eb c7 0f 0b 48 81 7a 58 40 74 a8 94 74 a7 <0f> 0b 48 83 7a 48 00 74 a5 0f 0b eb a1 89 fe 4c 89 cf e9 c8 c4 07 [ 82.441719] RSP: 0018:ffffb738803977c0 EFLAGS: 00010007 [ 82.442121] RAX: ffffa086389f9740 RBX: 0000000000000002 RCX: 0000000000000000 [ 82.442718] RDX: ffffa086350dd930 RSI: ffffa0863d76f600 RDI: 0000000000000200 [ 82.443484] RBP: 0000000000000200 R08: 0000000000000000 R09: ffffa086350dd970 [ 82.444128] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa086350dd930 [ 82.444773] R13: ffffa0863d76f600 R14: 0000000000000000 R15: ffffa08636738008 [ 82.445427] FS: 00007f6abfe9dd40(0000) GS:ffffa0863dd80000(0000) knlGS:00000 [ 82.446040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 82.446478] CR2: 0000557d288db4e8 CR3: 0000000078b36000 CR4: 00000000000006e0 [ 82.447104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 82.447561] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 82.448012] Call Trace: [ 82.448164] queue_delayed_work_on+0x6d/0x80 [ 82.448472] __pg_init_all_paths+0x7b/0xf0 [ 82.448714] pg_init_all_paths+0x26/0x40 [ 82.448980] __multipath_map_bio.isra.0+0x84/0x210 [ 82.449267] __map_bio+0x3c/0x1f0 [ 82.449468] __split_and_process_non_flush+0x14a/0x1b0 [ 82.449775] __split_and_process_bio+0xde/0x340 [ 82.450045] ? dm_get_live_table+0x5/0xb0 [ 82.450278] dm_process_bio+0x98/0x290 [ 82.450518] dm_make_request+0x54/0x120 [ 82.450778] generic_make_request+0xd2/0x3e0 [ 82.451038] ? submit_bio+0x3c/0x150 [ 82.451278] submit_bio+0x3c/0x150 [ 82.451492] mpage_readpages+0x129/0x160 [ 82.451756] ? bdev_evict_inode+0x1d0/0x1d0 [ 82.452033] read_pages+0x72/0x170 [ 82.452260] __do_page_cache_readahead+0x1ba/0x1d0 [ 82.452624] force_page_cache_readahead+0x96/0x110 [ 82.452903] generic_file_read_iter+0x84f/0xae0 [ 82.453192] ? __seccomp_filter+0x7c/0x670 [ 82.453547] new_sync_read+0x10e/0x190 [ 82.453883] vfs_read+0x9d/0x150 [ 82.454172] ksys_read+0x65/0xe0 [ 82.454466] do_syscall_64+0x4e/0x210 [ 82.454828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [...] [ 82.462501] ---[ end trace bb39975e9cf45daa ]--- Cc: [email protected] Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-04-28drm/i915: Use proper fault mask in interrupt postinstall tooMatt Roper1-4/+2
The IRQ postinstall handling had open-coded pipe fault mask selection that never got updated for gen11. Switch it to use gen8_de_pipe_fault_mask() to ensure we don't miss updates for new platforms. Cc: José Roberto de Souza <[email protected]> Fixes: d506a65d56fd ("drm/i915: Catch GTT fault errors for gen11+ planes") Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Ville Syrjälä <[email protected]> (cherry picked from commit 869129ee0c624a78c74e50b51635e183196cd2c6) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-28Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-20/+16
Pull vfs fixes from Al Viro: "Two old bugs..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: propagate_one(): mnt_set_mountpoint() needs mount_lock dlmfs_file_write(): fix the bogosity in handling non-zero *ppos
2020-04-28Fix use after free in get_tree_bdev()David Howells1-1/+1
Commit 6fcf0c72e4b9, a fix to get_tree_bdev() put a missing blkdev_put() in the wrong place, before a warnf() that displays the bdev under consideration rather after it. This results in a silent lockup in printk("%pg") called via warnf() from get_tree_bdev() under some circumstances when there's a race with the blockdev being frozen. This can be caused by xfstests/tests/generic/085 in combination with Lukas Czerner's ext4 mount API conversion patchset. It looks like it ought to occur with other users of get_tree_bdev() such as XFS, but apparently doesn't. Fix this by switching the order of the lines. Fixes: 6fcf0c72e4b9 ("vfs: add missing blkdev_put() in get_tree_bdev()") Reported-by: Lukas Czerner <[email protected]> Signed-off-by: David Howells <[email protected]> cc: Ian Kent <[email protected]> cc: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-04-28net/x25: Fix null-ptr-deref in x25_disconnectYueHaibing1-4/+6
We should check null before do x25_neigh_put in x25_disconnect, otherwise may cause null-ptr-deref like this: #include <sys/socket.h> #include <linux/x25.h> int main() { int sck_x25; sck_x25 = socket(AF_X25, SOCK_SEQPACKET, 0); close(sck_x25); return 0; } BUG: kernel NULL pointer dereference, address: 00000000000000d8 CPU: 0 PID: 4817 Comm: t2 Not tainted 5.7.0-rc3+ #159 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3- RIP: 0010:x25_disconnect+0x91/0xe0 Call Trace: x25_release+0x18a/0x1b0 __sock_release+0x3d/0xc0 sock_close+0x13/0x20 __fput+0x107/0x270 ____fput+0x9/0x10 task_work_run+0x6d/0xb0 exit_to_usermode_loop+0x102/0x110 do_syscall_64+0x23c/0x260 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Reported-by: [email protected] Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-28net/ena: Fix build warning in ena_xdp_set()Gavin Shan1-1/+1
This fixes the following build warning in ena_xdp_set(), which is observed on aarch64 with 64KB page size. In file included from ./include/net/inet_sock.h:19, from ./include/net/ip.h:27, from drivers/net/ethernet/amazon/ena/ena_netdev.c:46: drivers/net/ethernet/amazon/ena/ena_netdev.c: In function \ ‘ena_xdp_set’: \ drivers/net/ethernet/amazon/ena/ena_netdev.c:557:6: warning: \ format ‘%lu’ \ expects argument of type ‘long unsigned int’, but argument 4 \ has type ‘int’ \ [-Wformat=] "Failed to set xdp program, the current MTU (%d) is \ larger than the maximum allowed MTU (%lu) while xdp is on", Signed-off-by: Gavin Shan <[email protected]> Acked-by: Shay Agroskin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-28drm/amd/display: Use cursor locking to prevent flip delaysAric Cyr16-45/+88
[Why] Current locking scheme for cursor can result in a flip missing its vsync, deferring it for one or more vsyncs. Result is a potential for stuttering when cursor is moved. [How] Use cursor update lock so that flips are not blocked while cursor is being programmed. Signed-off-by: Aric Cyr <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1Sung Lee1-1/+1
[WHY] The downspread percentage was copied over from a previous version of the display_mode_lib spreadsheet. This value has been updated, and the previous value is too high to allow for such modes as 4K120hz. The new value is sufficient for such modes. [HOW] Update the value in dcn21_resource to match the spreadsheet. Signed-off-by: Sung Lee <[email protected]> Reviewed-by: Yongqiang Sun <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28drm/amd/display: Defer cursor update around VUPDATE for all ASICNicholas Kazlauskas1-14/+14
[Why] Fixes the following scenario: - Flip has been prepared sometime during the frame, update pending - Cursor update happens right when VUPDATE would happen - OPTC lock acquired, VUPDATE is blocked until next frame - Flip is delayed potentially infinitely With the igt@kms_cursor_legacy cursor-vs-flip-legacy test we can observe nearly *13* frames of delay for some flips on Navi. [How] Apply the Raven workaround generically. When close enough to VUPDATE block cursor updates from occurring from the dc_stream_set_cursor_* helpers. This could perhaps be a little smarter by checking if there were pending updates or flips earlier in the frame on the HUBP side before applying the delay, but this should be fine for now. This fixes the kms_cursor_legacy test. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28drm/amd/display: fix rn soc bb updateDmytro Laktyushkin1-43/+28
Currently RN SOC bounding box update assumes we will get at least 2 clock states from SMU. This isn't always true and because of special casing on first clock state we end up with low disp, dpp, dsc and phy clocks. This change removes the special casing allowing the first state to acquire correct clocks. Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Acked-by: Tony Cheng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28drm/amd/display: check if REFCLK_CNTL register is presentDmytro Laktyushkin1-1/+2
Check before programming the register since it isn't present on all IPs using this code. Signed-off-by: Dmytro Laktyushkin <[email protected]> Reviewed-by: Eric Bernstein <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds11-32/+47
Pull rdma fixes from Jason Gunthorpe: "A couple of regressions were found in rc1, as well as another set of races and bugs: - A regression where RDMA_CM_EVENT_REJECTED was lost in some cases - Bad error handling in the CM, uverbs, rvt, siw and i40iw - Kernel stack memory leak to user space in mlx4 - Missing data in a uapi query for mlx5 - Three races found by syzkaller in the ib core code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/core: Fix race between destroy and release FD object IB/rdmavt: Always return ERR_PTR from rvt_create_mmap_info() RDMA/core: Fix overwriting of uobj in case of error RDMA/core: Prevent mixed use of FDs between shared ufiles RDMA/uverbs: Fix a race with disassociate and exit_mmap() RDMA/mlx5: Set GRH fields in query QP on RoCE RDMA/siw: Fix potential siw_mem refcnt leak in siw_fastreg_mr() RDMA/mlx4: Initialize ib_spec on the stack RDMA/cm: Fix an error check in cm_alloc_id_priv() RDMA/cm: Fix missing RDMA_CM_EVENT_REJECTED event after receiving REJ message i40iw: fix null pointer dereference on a null wqe pointer
Powered by cgit, Gruvboxed by Blaster4385.