aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-09-27media: dt-bindings: samsung,exynos4212-fimc-is: replace duplicate pmu node ↵Krzysztof Kozlowski2-9/+11
with phandle The FIMC IS camera must access the PMU (Power Management Unit) IO memory to control camera power. This was achieved by duplicating the PMU node as its child like: soc@0 { system-controller@10020000 { ... }; // Real PMU camera@11800000 { fimc-is@12000000 { // FIMC IS camera node pmu@10020000 { reg = <0x10020000 0x3000>; // Fake PMU node }; }; }; }; This is not a correct representation of the hardware. Mapping the PMU (Power Management Unit) IO memory should be via syscon-like phandle (samsung,pmu-syscon, already used for other drivers), not by duplicating "pmu" Devicetree node inside the FIMC IS. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: staging: media: sunxi: cedrus: Remove redundant of_match_ptr()Ruan Jinjie1-1/+1
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: nxp: Use devm_kmemdup to replace devm_kmalloc + memcpyLi Zetao1-3/+1
Use the helper function devm_kmemdup() rather than duplicating its implementation, which helps to enhance code readability. Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: cx25840: simplify cx23885_dif_setup()Hans Verkuil1-2883/+811
Instead of creating a huge switch statement (that thoroughly confuses smatch), create a table of coefficients and use that. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: platform: Use dev_err_probe instead of dev_errWang Ming1-3/+2
It is possible that dma_request_chan will return EPROBE_DEFER, which means that dma->xdev->dev is not ready yet. In this case, dev_err(dma->xdev->dev), there will be no output. This patch fixes the bug. Signed-off-by: Wang Ming <machel@vivo.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: bt8xx: make read-only arrays staticColin Ian King1-5/+9
Don't populate the arrays on the stack, instead make them static const. Also add spaces between values to clean up checkpatch style warnings. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: bttv: Add MODULE_FIRMWARE macroJuerg Haefliger1-0/+1
The module loads firmware so add a MODULE_FIRMWARE macro to provide that information via modinfo. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: bttv: fix use after free error due to btv->timeout timerZheng Wang1-0/+1
There may be some a race condition between timer function bttv_irq_timeout and bttv_remove. The timer is setup in probe and there is no timer_delete operation in remove function. When it hit kfree btv, the function might still be invoked, which will cause use after free bug. This bug is found by static analysis, it may be false positive. Fix it by adding del_timer_sync invoking to the remove function. cpu0 cpu1 bttv_probe ->timer_setup ->bttv_set_dma ->mod_timer; bttv_remove ->kfree(btv); ->bttv_irq_timeout ->USE btv Fixes: 162e6376ac58 ("media: pci: Convert timers to use timer_setup()") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov9734: Drop system suspend and resume handlersLaurent Pinchart1-46/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov8856: Drop system suspend and resume handlersLaurent Pinchart1-44/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov5675: Drop system suspend and resume handlersLaurent Pinchart1-41/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov5670: Drop system suspend and resume handlersLaurent Pinchart1-34/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov13b10: Drop stream handling in runtime PM handlersLaurent Pinchart1-33/+1
The sensor is guaranteed not to be streaming when the runtime PM resume handler is called, as the resume handler is only called from the .s_stream() operation when starting streaming. Similarly, the sensor has been stopped when the runtime PM suspend handler is called. There is thus no need for manual stream start/stop from the runtime PM handlers. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov2740: Drop system suspend and resume handlersLaurent Pinchart1-42/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov13858: Drop system suspend and resume handlersLaurent Pinchart1-40/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov08x40: Drop system suspend and resume handlersLaurent Pinchart1-40/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov08d10: Drop system suspend and resume handlersLaurent Pinchart1-49/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov02a10: Drop system suspend and resume handlersLaurent Pinchart1-2/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov01a10: Drop system suspend and resume handlersLaurent Pinchart1-54/+3
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: og01a1b: Drop system suspend and resume handlersLaurent Pinchart1-47/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: imx355: Drop system suspend and resume handlersLaurent Pinchart1-41/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: imx319: Drop system suspend and resume handlersLaurent Pinchart1-40/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: imx258: Drop system suspend and resume handlersLaurent Pinchart1-36/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: imx219: Drop system suspend and resume handlersLaurent Pinchart1-41/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: imx214: Drop system suspend and resume handlersLaurent Pinchart1-37/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: imx208: Drop system suspend and resume handlersLaurent Pinchart1-43/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: hi847: Drop system suspend and resume handlersLaurent Pinchart1-52/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: hi846: Drop system suspend and resume handlersLaurent Pinchart1-24/+1
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. Now that the runtime PM operations are not called from the system PM handlers, the sensor is guaranteed not to be streaming when the runtime PM resume handler is called, and to have been stopped already when the runtime PM suspend handler is called. Drop the manual stream start/stop from the runtime PM handlers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: hi556: Drop system suspend and resume handlersLaurent Pinchart1-47/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ccs: Drop system suspend and resume handlersLaurent Pinchart1-37/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ar0521: Drop system suspend and resume handlersLaurent Pinchart1-29/+1
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27Documentation: media: camera-sensor: Improve power management documentationLaurent Pinchart1-16/+42
Camera sensor drivers are highly subject to cargo cult programming, with back practices being copied from old to new drivers. In particular, many drivers implement system and runtime PM incorrectly. As a first step towards fixing this situation, refactor and expand the power management documentation to detail correct usage of system and runtime PM. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27Documentation: media: camera-sensor: Move power management sectionLaurent Pinchart1-35/+35
Move the power management section up, just after clocks, as it relates to internal system resources and not features exposed to applications. The text itself is otherwise unchanged. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27Documentation: media: camera-sensor: Use link to upstream DT bindingsLaurent Pinchart1-4/+5
The Documentation/devicetree/bindings/clock/clock-bindings.txt file is deprecated and points to clock-bindings.yaml, which is not hosted in the kernel source tree. Use an HTTPS link to refer to the YAML binding document. While at it, drop "currently" from the paragraph, as the whole file refers to the current recommended practices except where explicitly noted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27Documentation: media: camera-sensor: Fix typo and vocabulary selectionLaurent Pinchart1-2/+2
Drop an unneeded double colon, and use 'shall' instead of 'must' for consistency with the rest of the file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov9734: Drop check for reentrant .s_stream()Laurent Pinchart1-4/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov9282: Drop check for reentrant .s_stream()Laurent Pinchart1-9/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov8856: Drop check for reentrant .s_stream()Laurent Pinchart1-3/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov7740: Drop check for reentrant .s_stream()Laurent Pinchart1-7/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov5695: Drop check for reentrant .s_stream()Laurent Pinchart1-6/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov5675: Drop check for reentrant .s_stream()Laurent Pinchart1-3/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov5670: Drop check for reentrant .s_stream()Laurent Pinchart1-2/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov5647: Drop check for reentrant .s_stream()Laurent Pinchart1-6/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov4689: Drop check for reentrant .s_stream()Laurent Pinchart1-8/+1
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Mikhail Rudenko <mike.rudenko@gmail.com> [Sakari Ailus: remove now-redundant "streaming" from comment.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov2740: Drop check for reentrant .s_stream()Laurent Pinchart1-3/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov2685: Drop check for reentrant .s_stream()Laurent Pinchart1-7/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. The streaming field of the driver's private structure is now unused, drop it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov13b10: Drop check for reentrant .s_stream()Laurent Pinchart1-4/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov13858: Drop check for reentrant .s_stream()Laurent Pinchart1-4/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov08x40: Drop check for reentrant .s_stream()Laurent Pinchart1-4/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ov08d10: Drop check for reentrant .s_stream()Laurent Pinchart1-3/+0
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Powered by cgit, Gruvboxed by Blaster4385.