| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In theory a device might set the mem_info_valid bit for a first range
after it is ready but before as second range has reached that state.
Therefore, the correct approach is to check the Mem_info_valid bit for
each applicable DVSEC range against HDM_COUNT, rather than only for the
DVSEC range 1. Consequently, let's move the check into the "for loop"
that handles each DVSEC range.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Yanfei Xu <[email protected]>
Reviewed-by: Alison Schofield <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
commit ce17ad0d5498 ("cxl: Wait Memory_Info_Valid before access memory
related info") added another implementation, which is
cxl_dvsec_mem_range_valid(), of waiting for memory_info_valid without
realizing it duplicated wait_for_valid(). Remove wait_for_valid() and
retain cxl_dvsec_mem_range_valid() as the former is hardcoded to check
only the Memory_Info_Valid bit of DVSEC range 1, while the latter allows
for selection between DVSEC range 1 or 2 via parameter.
Suggested-by: Dan Williams <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Yanfei Xu <[email protected]>
Reviewed-by: Alison Schofield <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
The function cxl_dvsec_rr_decode() retrieves and records DVSEC ranges
into info->dvsec_range[], regardless of whether it is non-zero range,
and the variable info->ranges indicates the number of non-zero ranges.
However, in cxl_hdm_decode_init(), the validation for
info->dvsec_range[] occurs in a for loop that iterates based on
info->ranges. It may result in zero range to be validated but non-zero
range not be validated, in turn, the number of allowed ranges is to be
0. Address it by only record non-zero ranges.
This fix is not urgent as it requires a configuration that zeroes out
the first dvsec range while populating the second. This has not been
observed, but it is theoretically possible. If this gets picked up for
-stable, no harm done, but there is no urgency to backport.
Fixes: 560f78559006 ("cxl/pci: Retrieve CXL DVSEC memory info")
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Yanfei Xu <[email protected]>
Reviewed-by: Alison Schofield <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
cxl_dport_init_ras_reporting() already checks host_bridge->native_aer
before invoking cxl_disable_rch_root_ints(), so
cxl_disable_rch_root_ints() does not need to check it again.
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
cxl_dport_map_ras() is used to map CXL RAS capability, the RCH AER
capability should not be mapped in the function but should mapped in
cxl_dport_init_ras_reporting(). Moving cxl_dport_map_ras() out of
cxl_dport_map_ras() and into cxl_dport_init_ras_reporting().
In cxl_dport_init_ras_reporting(), the AER capability position in RCRB
will be located but the position is only used in
cxl_dport_map_rch_aer(), getting the position in cxl_dport_map_rch_aer()
rather than cxl_dport_init_ras_reporting() is more reasonable and makes
the code clearer.
Besides, some local variables in cxl_dport_map_rch_aer() are
unnecessary, remove them to make the function more concise.
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
The name of cxl_setup_parent_dport() function is not clear, the function
is used to initialize AER and RAS capabilities on a dport, therefore,
rename the function to cxl_dport_init_ras_reporting(), it is easier for
user to understand what the function does. Besides, adjust the order of
the function parameters, the subject of cxl_dport_init_ras_reporting()
is a cxl dport, so a struct cxl_dport as the first parameter of the
function should be better.
cxl_dport_map_regs() is used to map CXL RAS capability on a cxl dport,
using cxl_dport_map_ras() as the function name.
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
In __devm_cxl_add_port(), there is a 'goto' to call put_device() for the
error cases between device_initialize() and device_add() to dereference
the 'struct device' of a new cxl_port. The 'goto' pattern in the case
can be removed by refactoring. Introducing a new function called
cxl_port_add() which is used to add the 'struct device' of a new
cxl_port to device hierarchy, moving the functions needing the help of
the 'goto' into cxl_port_add(), and using a scoped-based resource
management __free() to drop the open coded put_device() and the 'goto'
for the error cases.
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
A device_lock() and device_unlock() pair can be replaced by a cleanup
helper scoped_guard() or guard(), that can enhance code readability. In
CXL subsystem, still use device_lock() and device_unlock() pairs for cxl
port resource protection, most of them can be replaced by a
scoped_guard() or a guard() simply.
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
Using scope-based resource management __free() marco with a new helper
called put_cxl_port() to drop open coded the put_device() used to
dereference the 'struct device' in cxl_port.
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Li Ming <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
The header file core.h is included twice. Remove the last
one. The compilation test has passed.
Signed-off-by: Hongbo Li <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
Use dev_is_platform() instead of checking bus type directly.
Signed-off-by: Kunwu Chan <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro utilizes the __force and __must_check modifiers, which instruct
the compiler to verify for errors at the locations where it is employed.
Signed-off-by: Yuesong Li <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Alison Schofield <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>
|
|
|
|
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
|
|
Push bcachefs fixes from Kent Overstreet:
"The data corruption in the buffered write path is troubling; inode
lock should not have been able to cause that...
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix"
* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
bcachefs: Mark more errors as autofix
bcachefs: Revert lockless buffered IO path
bcachefs: Fix bch2_extents_match() false positive
bcachefs: Fix failure to return error in data_update_index_update()
|
|
errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.
note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
We had a report of data corruption on nixos when building installer
images.
https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334
It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.
Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.
It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.
Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.
My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.
Fixes: 7e64c86cdc6c ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
|
|
Commit a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Fixes: a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- One more write delegation fix
* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
|
|
Pull xfs fixes from Chandan Babu:
- Do not call out v1 inodes with non-zero di_nlink field as being
corrupt
- Change xfs_finobt_count_blocks() to count "free inode btree" blocks
rather than "inode btree" blocks
- Don't report the number of trimmed bytes via FITRIM because the
underlying storage isn't required to do anything and failed discard
IOs aren't reported to the caller anyway
- Fix incorrect setting of rm_owner field in an rmap query
- Report missing disk offset range in an fsmap query
- Obtain m_growlock when extending realtime section of the filesystem
- Reset rootdir extent size hint after extending realtime section of
the filesystem
* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reset rootdir extent size hint after growfsrt
xfs: take m_growlock when running growfsrt
xfs: Fix missing interval for missing_owner in xfs fsmap
xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
xfs: Fix the owner setting issue for rmap query in xfs fsmap
xfs: don't bother reporting blocks trimmed via FITRIM
xfs: xfs_finobt_count_blocks() walks the wrong btree
xfs: fix folio dirtying for XFILE_ALLOC callers
xfs: fix di_onlink checking for V1/V2 inodes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as PCI native host bridge and endpoint
driver reviewer (Manivannan Sadhasivam)
- Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
work around hardware erratum that causes a constant stream of
interrupts (Manivannan Sadhasivam)
- Don't try to fall back to qcom Operating Performance Points (OPP)
support unless the platform actually supports OPP (Manivannan
Sadhasivam)
- Add [email protected] mailing list to MAINTAINERS for NXP
layerscape and imx6 PCI controller drivers (Frank Li)
* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: PCI: Add NXP PCI controller mailing list [email protected]
PCI: qcom: Use OPP only if the platform supports it
PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers
|
|
Pull block fix from Jens Axboe:
"Fix for a single regression for WRITE_SAME introduced in the 6.11
merge window"
* tag 'block-6.11-20240830' of git://git.kernel.dk/linux:
block: fix detection of unsupported WRITE SAME in blkdev_issue_write_zeroes
|
|
Pull io_uring fixes from Jens Axboe:
- A fix for a regression that happened in 6.11 merge window, where the
copying of iovecs for compat mode applications got broken for certain
cases.
- Fix for a bug introduced in 6.10, where if using recv/send bundles
with classic provided buffers, the recv/send would fail to set the
right iovec count. This caused 0 byte send/recv results. Found via
code coverage testing and writing a test case to exercise it.
* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
io_uring/kbuf: return correct iovec count from classic buffer peek
io_uring/rsrc: ensure compat iovecs are copied correctly
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v6.11
It contains:
- DTS directory update to match all entries not only those starting with
at91 or sama
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"One small patch to correct a NFS permissions problem with SELinux and
Smack"
* tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
selinux,smack: don't bypass permissions check in inode_setsecctx hook
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the amd-pstate cpufreq driver.
Specifics:
- Remove checks for highest performance match on preferred cores when
updating preferred core ranking in amd-pstate (Mario Limonciello)
- Make amd-pstate call topology_logical_package_id() instead of
logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)
- Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
Carpenter)"
* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- A bunch of dw driver changes to fix the src/dst addr width config
- Omap driver fix for sglen initialization
- stm32-dma3 driver lli_size init fix
- dw edma driver fixes for watermark interrupts and unmasking STOP and
ABORT interrupts
* tag 'dmaengine-fix-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: dw-edma: Do not enable watermark interrupts for HDMA
dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA
dmaengine: stm32-dma3: Set lli_size after allocation
dmaengine: ti: omap-dma: Initialize sglen after allocation
dmaengine: dw: Unify ret-val local variables naming
dmaengine: dw: Simplify max-burst calculation procedure
dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks
dmaengine: dw: Simplify prepare CTL_LO methods
dmaengine: dw: Add memory bus width verification
dmaengine: dw: Add peripheral bus width verification
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP X1E80100 PCIe Gen4 PHY initialisation fix
- Freescale imx8mq tuning parameter name fix
- Samsung exynos5 fir for error code in probe()
- Xilinx Zynqmp SGMII linkup failure fix
* tag 'phy-fixes-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume
phy: exynos5-usbdrd: fix error code in probe()
phy: fsl-imx8mq-usb: fix tuning parameter name
phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for non-continous port map programming
* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: fix programming slave ports for non-continous port maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
Add imx mailing list [email protected] for PCI controller of NXP chips
(Layerscape and iMX).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Frank Li <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Richard Zhu <[email protected]>
|
|
io_provided_buffers_select() returns 0 to indicate success, but it should
be returning 1 to indicate that 1 vec was mapped. This causes peeking
to fail with classic provided buffers, and while that's not a use case
that anyone should use, it should still work correctly.
The end result is that no buffer will be selected, and hence a completion
with '0' as the result will be posted, without a buffer attached.
Fixes: 35c8711c8fc4 ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Signed-off-by: Jens Axboe <[email protected]>
|
|
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
For buffer registration (or updates), a userspace iovec is copied in
and updated. If the application is within a compat syscall, then the
iovec type is compat_iovec rather than iovec. However, the type used
in __io_sqe_buffers_update() and io_sqe_buffers_register() is always
struct iovec, and hence the source is incremented by the size of a
non-compat iovec in the loop. This misses every other iovec in the
source, and will run into garbage half way through the copies and
return -EFAULT to the application.
Maintain the source address separately and assign to our user vec
pointer, so that copies always happen from the right source address.
While in there, correct a bad placement of __user which triggered
the following sparse warning prior to this fix:
io_uring/rsrc.c:981:33: warning: cast removes address space '__user' of expression
io_uring/rsrc.c:981:30: warning: incorrect type in assignment (different address spaces)
io_uring/rsrc.c:981:30: expected struct iovec const [noderef] __user *uvec
io_uring/rsrc.c:981:30: got struct iovec *[noderef] __user
Fixes: f4eaf8eda89e ("io_uring/rsrc: Drop io_copy_iov in favor of iovec API")
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device id for 6.11-rc6
Here's a new modem device id.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825L
|
|
Pull drm fixes from Dave Airlie:
"Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
charge, then i915 and xe changes along with v3d and some other bits.
The TTM revert is due to some stuttering graphical apps probably due
to longer stalls while prefaulting.
Seems pretty much where I'd expect things,
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix #11195: The external display connect via USB type-C dock stays
blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats"
* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
drm/v3d: Disable preemption while updating GPU stats
drm/amd/pm: Drop unsupported features on smu v14_0_2
drm/amd/pm: Add support for new P2S table revision
drm/amdgpu: support for gc_info table v1.3
drm/amd/display: avoid using null object of framebuffer
drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
drm/amd/pm: update message interface for smu v14.0.2/3
drm/amdgpu/swsmu: always force a state reprogram on init
drm/amdgpu/smu13.0.7: print index for profiles
drm/amdgpu: align pp_power_profile_mode with kernel docs
drm/i915/dp_mst: Fix MST state after a sink reset
drm/xe: Invalidate media_gt TLBs
drm/i915: ARL requires a newer GSC firmware
drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
video/aperture: optionally match the device in sysfb_disable()
drm/vmwgfx: Disable coherent dumb buffers without 3d
drm/vmwgfx: Fix prime with external buffers
drm/vmwgfx: Prevent unmapping active read buffers
Revert "drm/ttm: increase ttm pre-fault value to PMD size"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Invalidate media_gt TLBs (Brost)
- Fix HWMON i1 power setup write command (Karthik)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
- binfmt_elf_fdpic: fix AUXV size with ELF_HWCAP2 (Max Filippov)
* tag 'execve-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined
|
|
The runtime constant feature removes all the users of these variables,
allowing the compiler to optimize them away. It's quite difficult to
extract their values from the kernel text, and the memory saved by
removing them is tiny, and it was never the point of this optimization.
Since the dentry_hashtable is a core data structure, it's valuable for
debugging tools to be able to read it easily. For instance, scripts
built on drgn, like the dentrycache script[1], rely on it to be able to
perform diagnostics on the contents of the dcache. Annotate it as used,
so the compiler doesn't discard it.
Link: https://github.com/oracle-samples/drgn-tools/blob/3afc56146f54d09dfd1f6d3c1b7436eda7e638be/drgn_tools/dentry.py#L325-L355 [1]
Fixes: e3c92e81711d ("runtime constants: add x86 architecture support")
Signed-off-by: Stephen Brennan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix #11195: The external display connect via USB type-C dock stays blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
. Move ARL GuC firmware to correct version
-
Signed-off-by: Dave Airlie <[email protected]>
From: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- pt5161l: Fix invalid temperature reading of bad ADC values
- asus-ec-sensors: Remove unsupported VRM temperature from X570-E
GAMING
* tag 'hwmon-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pt5161l) Fix invalid temperature reading
hwmon: (asus-ec-sensors) remove VRM temp X570-E GAMING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
|
|
Commit 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading
command status") uncovered an existing problem with cypress_ps2 driver:
it tries waiting on a PS/2 device waitqueue without using the rest of
libps2. Unfortunately without it nobody signals wakeup for the
waiting process, and each "extended" command was timing out. But the
rest of the code simply did not notice it.
Fix this by switching from homegrown way of sending request to get
command response and reading it to standard ps2_command() which does
the right thing.
Reported-by: Woody Suwalski <[email protected]>
Tested-by: Woody Suwalski <[email protected]>
Fixes: 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading command status")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|