aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-18net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDYAya Levin4-9/+43
Initialize RQ doorbell counters to zero prior to moving an RQ from RST to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor ID on the completion is reset. The doorbell record must comply. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <[email protected]> Reported-by: Tariq Toukan <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-02-18net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepaHuy Nguyen1-11/+3
rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa cannot take mutex lock. Two possible issues can happen: 1. User at the same time change vepa mode via RTM_SETLINK command. 2. User at the same time change the switchdev mode via devlink netlink interface. Case 1 cannot happen because rtnl executes one message in order. Case 2 can happen but we do not expect user to change the switchdev mode when changing vepa. Even if a user does it, so he will read a value which is no longer valid. Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Huy Nguyen <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller7-45/+220
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This batch contains Netfilter fixes for net: 1) Restrict hashlimit size to 1048576, from Cong Wang. 2) Check for offload flags from nf_flow_table_offload_setup(), this fixes a crash in case the hardware offload is disabled. From Florian Westphal. 3) Three preparation patches to extend the conntrack clash resolution, from Florian. 4) Extend clash resolution to deal with DNS packets from the same flow racing to set up the NAT configuration. 5) Small documentation fix in pipapo, from Stefano Brivio. 6) Remove misleading unlikely() from pipapo_refill(), also from Stefano. 7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually triggering another problem, still under discussion, another patch to fix this will follow up. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-02-18Merge tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds4-64/+59
Pull dma-mapping fixes from Christoph Hellwig: - give command line cma= precedence over the CONFIG_ option (Nicolas Saenz Julienne) - always allow 32-bit DMA, even for weirdly placed ZONE_DMA - improve the debug printks when memory is not addressable, to help find problems with swiotlb initialization * tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: improve DMA mask overflow reporting dma-direct: improve swiotlb error reporting dma-direct: relax addressability checks in dma_direct_supported dma-contiguous: CMA: give precedence to cmdline
2020-02-18Merge tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds3-3/+7
Pull tpm fixes from Jarkko Sakkinen: "Two bug fixes" * tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Initialize crypto_id of allocated_banks to HASH_ALGO__LAST tpm: Revert tpm_tis_spi_mod.ko to tpm_tis_spi.ko.
2020-02-18pipe: make sure to wake up everybody when the last reader/writer closesLinus Torvalds1-8/+10
Andrei Vagin reported that commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") broke one of the CRIU tests. He even has a trivial reproducer: #include <unistd.h> #include <sys/types.h> #include <sys/wait.h> int main() { int p[2]; pid_t p1, p2; int status; if (pipe(p) == -1) return 1; p1 = fork(); if (p1 == 0) { close(p[1]); read(p[0], &status, sizeof(status)); return 0; } p2 = fork(); if (p2 == 0) { close(p[1]); read(p[0], &status, sizeof(status)); return 0; } sleep(1); close(p[1]); wait(&status); wait(&status); return 0; } and the problem - once he points it out - is obvious. We use these nice exclusive waits, but when the last writer goes away, it then needs to wake up _every_ reader (and conversely, the last reader disappearing needs to wake every writer, of course). In fact, when going through this, we had several small oddities around how to wake things. We did in fact wake every reader when we changed the size of the pipe buffers. But that's entirely pointless, since that just acts as a possible source of new space - no new data to read. And when we change the size of the buffer, we don't need to wake all writers even when we add space - that case acts just as if somebody made space by reading, and any writer that finds itself not filling it up entirely will wake the next one. On the other hand, on the exit path, we tried to limit the wakeups with the proper poll keys etc, which is entirely pointless, because at that point we obviously need to wake up everybody. So don't do that: just wake up everybody - but only do that if the counts changed to zero. So fix those non-IO wakeups to be more proper: space change doesn't add any new data, but it might make room for writers, so it wakes up a writer. And the actual changes to reader/writer counts should wake up everybody, since everybody is affected (ie readers will all see EOF if the writers have gone away, and writers will all get EPIPE if all readers have gone away). Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Reported-and-tested-by: Andrei Vagin <[email protected]> Cc: Josh Triplett <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-02-18netfilter: nft_set_pipapo: Don't abuse unlikely() in pipapo_refill()Stefano Brivio1-1/+1
I originally used unlikely() in the if (match_only) clause, which we hit on the mapping table for the last field in a set, to ensure we avoid branching to the rest of for loop body, which is executed more frequently. However, Pablo reports, this is confusing as it gives the impression that this is not a common case, and it's actually not the intended usage of unlikely(). I couldn't observe any statistical difference in matching rates on x864_64 and aarch64 without it, so just drop it. Reported-by: Pablo Neira Ayuso <[email protected]> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-02-18netfilter: nft_set_pipapo: Fix mapping table example in commentsStefano Brivio1-2/+2
In both insertion and lookup examples, the two element pointers of rule mapping tables were swapped. Fix that. Reported-by: Pablo Neira Ayuso <[email protected]> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-02-18flow_table.c: Use built-in RCU list checkingMadhuparna Bhowmik1-2/+4
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18datapath.c: Use built-in RCU list checkingMadhuparna Bhowmik1-3/+6
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18vport.c: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18meter.c: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18netlabel_domainhash.c: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18net: netlabel: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18Revert "net: dev: introduce support for sch BYPASS for lockless qdisc"Paolo Abeni1-20/+2
This reverts commit ba27b4cdaaa66561aaedb2101876e563738d36fe Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc"). I can't find any working solution other than a plain revert. This will introduce some minor performance regressions for pfifo_fast qdisc. I plan to address them in net-next with more indirect call wrapper boilerplate for qdiscs. Reported-by: Ahmad Fatoum <[email protected]> Fixes: ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18net: phy: broadcom: Fix a typo ("firsly")Jonathan Neuschäfer1-2/+2
Signed-off-by: Jonathan Neuschäfer <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18mptcp: fix bogus socket flag valuesFlorian Westphal1-2/+2
Dan Carpenter reports static checker warnings due to bogus BIT() usage: net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number [..] This is harmless (we use bits 1 & 2 instead of 0 and 1), but would break eventually when adding BIT(5) (or 6, depends on size of 'long'). Just use 0 and 1, the values are only passed to test/set/clear_bit functions. Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18qede: Fix race between rdma destroy workqueue and link change eventMichal Kalderon2-1/+30
If an event is added while the rdma workqueue is being destroyed it could lead to several races, list corruption, null pointer dereference during queue_work or init_queue. This fixes the race between the two flows which can occur during shutdown. A kref object and a completion object are added to the rdma_dev structure, these are initialized before the workqueue is created. The refcnt is used to indicate work is being added to the workqueue and ensures the cleanup flow won't start while we're in the middle of adding the event. Once the work is added, the refcnt is decreased and the cleanup flow is safe to run. Fixes: cee9fbd8e2e ("qede: Add qedr framework") Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: Michal Kalderon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18Merge tag 'thunderbolt-fix-for-v5.6-rc3' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.6-rc3 Single fix that orders the THUNDERBOLT MAINTAINERS record according to parse-maintainers.pl. * tag 'thunderbolt-fix-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: MAINTAINERS: Sort entries in database for THUNDERBOLT
2020-02-18iommu/vt-d: Simplify check in identity_mapping()Joerg Roedel1-1/+1
The function only has one call-site and there it is never called with dummy or deferred devices. Simplify the check in the function to account for that. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: [email protected] # v5.5 Reviewed-by: Jerry Snitselaar <[email protected]> Acked-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2020-02-18iommu/vt-d: Remove deferred_attach_domain()Joerg Roedel1-8/+3
The function is now only a wrapper around find_domain(). Remove the function and call find_domain() directly at the call-sites. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: [email protected] # v5.5 Reviewed-by: Jerry Snitselaar <[email protected]> Acked-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2020-02-18iommu/vt-d: Do deferred attachment in iommu_need_mapping()Joerg Roedel1-3/+7
The attachment of deferred devices needs to happen before the check whether the device is identity mapped or not. Otherwise the check will return wrong results, cause warnings boot failures in kdump kernels, like WARNING: CPU: 0 PID: 318 at ../drivers/iommu/intel-iommu.c:592 domain_get_iommu+0x61/0x70 [...] Call Trace: __intel_map_single+0x55/0x190 intel_alloc_coherent+0xac/0x110 dmam_alloc_attrs+0x50/0xa0 ahci_port_start+0xfb/0x1f0 [libahci] ata_host_start.part.39+0x104/0x1e0 [libata] With the earlier check the kdump boot succeeds and a crashdump is written. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: [email protected] # v5.5 Reviewed-by: Jerry Snitselaar <[email protected]> Acked-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2020-02-18iommu/vt-d: Move deferred device attachment into helper functionJoerg Roedel1-8/+12
Move the code that does the deferred device attachment into a separate helper function. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: [email protected] # v5.5 Reviewed-by: Jerry Snitselaar <[email protected]> Acked-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2020-02-18iommu/vt-d: Add attach_deferred() helperJoerg Roedel1-4/+8
Implement a helper function to check whether a device's attach process is deferred. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: [email protected] # v5.5 Reviewed-by: Jerry Snitselaar <[email protected]> Acked-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2020-02-18libbpf: Sanitise internal map names so they are not rejected by the kernelToke Høiland-Jørgensen1-1/+7
The kernel only accepts map names with alphanumeric characters, underscores and periods in their name. However, the auto-generated internal map names used by libbpf takes their prefix from the user-supplied BPF object name, which has no such restriction. This can lead to "Invalid argument" errors when trying to load a BPF program using global variables. Fix this by sanitising the map names, replacing any non-allowed characters with underscores. Fixes: d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections") Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-02-18bpf, uapi: Remove text about bpf_redirect_map() giving higher performanceToke Høiland-Jørgensen2-18/+14
The performance of bpf_redirect() is now roughly the same as that of bpf_redirect_map(). However, David Ahern pointed out that the header file has not been updated to reflect this, and still says that a significant performance increase is possible when using bpf_redirect_map(). Remove this text from the bpf_redirect_map() description, and reword the description in bpf_redirect() slightly. Also fix the 'Return' section of the bpf_redirect_map() documentation. Fixes: 1d233886dd90 ("xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths") Reported-by: David Ahern <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-02-18ima: add sm3 algorithm to hash algorithm configuration listTianjia Zhang1-0/+5
sm3 has been supported by the ima hash algorithm, but it is not yet in the Kconfig configuration list. After adding, both ima and tpm2 can support sm3 well. Signed-off-by: Tianjia Zhang <[email protected]> Signed-off-by: Mimi Zohar <[email protected]>
2020-02-18crypto: rename sm3-256 to sm3 in hash_algo_nameTianjia Zhang1-1/+1
The name sm3-256 is defined in hash_algo_name in hash_info, but the algorithm name implemented in sm3_generic.c is sm3, which will cause the sm3-256 algorithm to be not found in some application scenarios of the hash algorithm, and an ENOENT error will occur. For example, IMA, keys, and other subsystems that reference hash_algo_name all use the hash algorithm of sm3. Fixes: 5ca4c20cfd37 ("keys, trusted: select hash algorithm for TPM2 chips") Signed-off-by: Tianjia Zhang <[email protected]> Reviewed-by: Pascal van Leeuwen <[email protected]> Signed-off-by: Mimi Zohar <[email protected]>
2020-02-18efi: Only print errors about failing to get certs if EFI vars are foundJavier Martinez Canillas1-14/+26
If CONFIG_LOAD_UEFI_KEYS is enabled, the kernel attempts to load the certs from the db, dbx and MokListRT EFI variables into the appropriate keyrings. But it just assumes that the variables will be present and prints an error if the certs can't be loaded, even when is possible that the variables may not exist. For example the MokListRT variable will only be present if shim is used. So only print an error message about failing to get the certs list from an EFI variable if this is found. Otherwise these printed errors just pollute the kernel log ring buffer with confusing messages like the following: [ 5.427251] Couldn't get size: 0x800000000000000e [ 5.427261] MODSIGN: Couldn't get UEFI db list [ 5.428012] Couldn't get size: 0x800000000000000e [ 5.428023] Couldn't get UEFI MokListRT Reported-by: Hans de Goede <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Tested-by: Hans de Goede <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Mimi Zohar <[email protected]>
2020-02-18Merge tag 'asoc-fix-v5.6-rc2' of ↵Takashi Iwai16-415/+219
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.6 A few fixes sent in since the merge window, none of them with global impact but all important for the users they affect.
2020-02-18ALSA: hda: Use scnprintf() for printing texts for sysfs/procfsTakashi Iwai4-5/+5
Some code in HD-audio driver calls snprintf() in a loop and still expects that the return value were actually written size, while snprintf() returns the expected would-be length instead. When the given buffer limit were small, this leads to a buffer overflow. Use scnprintf() for addressing those issues. It returns the actually written size unlike snprintf(). Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-02-18ALSA: hda/realtek - Apply quirk for yet another MSI laptopTakashi Iwai1-0/+1
MSI GP65 laptop with SSID 1462:1293 requires the same quirk as other MSI models. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159 Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-02-18drm/i915/gt: Avoid resetting ring->head outside of its timeline mutexChris Wilson3-23/+21
We manipulate ring->head while active in i915_request_retire underneath the timeline manipulation. We cannot rely on a stable ring->head outside of the timeline->mutex, in particular while setting up the context for resume and reset. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1126 Fixes: 0881954965e3 ("drm/i915: Introduce intel_context.pin_mutex for pin management") Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex") References: f3c0efc9fe7a ("drm/i915/execlists: Leave resetting ring to intel_ring") Signed-off-by: Chris Wilson <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 42827350f75c56d0fe9f15d8425a1390528958b6) Signed-off-by: Jani Nikula <[email protected]>
2020-02-18drm/i915/execlists: Always force a context reload when rewinding RING_TAILChris Wilson4-10/+18
If we rewind the RING_TAIL on a context, due to a preemption event, we must force the context restore for the RING_TAIL update to be properly handled. Rather than note which preemption events may cause us to rewind the tail, compare the new request's tail with the previously submitted RING_TAIL, as it turns out that timeslicing was causing unexpected rewinds. <idle>-0 0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3 <idle>-0 0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964 <idle>-0 0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695 <idle>-0 0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695 ^---- Note we unwind 2 requests from the same context <idle>-0 0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695 <idle>-0 0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506 ^---- But to apply the new timeslice, we have to replay the first request before the new client can start -- the unexpected RING_TAIL rewind <idle>-0 0d.s2 1280851219us : trace_ports: 0000:00:02.0 rcs0: submit { 130:4696*, 134:1508 } synmark2-5425 2..s. 1280851239us : process_csb: 0000:00:02.0 rcs0: cs-irq head=5, tail=0 synmark2-5425 2..s. 1280851240us : process_csb: 0000:00:02.0 rcs0: csb[0]: status=0x00008002:0x00000000 ^---- Preemption event for the ELSP update; note the lite-restore synmark2-5425 2..s. 1280851243us : trace_ports: 0000:00:02.0 rcs0: preempted { 130:4698, 66:119966 } synmark2-5425 2..s. 1280851246us : trace_ports: 0000:00:02.0 rcs0: promote { 130:4696*, 134:1508 } synmark2-5425 2.... 1280851462us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4700, current 4695 synmark2-5425 2.... 1280852111us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4702, current 4695 synmark2-5425 2.Ns1 1280852296us : process_csb: 0000:00:02.0 rcs0: cs-irq head=0, tail=2 synmark2-5425 2.Ns1 1280852297us : process_csb: 0000:00:02.0 rcs0: csb[1]: status=0x00000814:0x00000000 synmark2-5425 2.Ns1 1280852299us : trace_ports: 0000:00:02.0 rcs0: completed { 130:4696!, 134:1508 } synmark2-5425 2.Ns1 1280852301us : process_csb: 0000:00:02.0 rcs0: csb[2]: status=0x00000818:0x00000040 synmark2-5425 2.Ns1 1280852302us : trace_ports: 0000:00:02.0 rcs0: completed { 134:1508, 0:0 } synmark2-5425 2.Ns1 1280852313us : process_csb: process_csb:2336 GEM_BUG_ON(!i915_request_completed(*execlists->active) && !reset_in_progress(execlists)) Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Referenecs: 82c69bf58650 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Cc: <[email protected]> # v5.4+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 5ba32c7be81e53ea8a27190b0f6be98e6c6779af) Signed-off-by: Jani Nikula <[email protected]>
2020-02-18drm/i915: Wean off drm_pci_alloc/drm_pci_freeChris Wilson4-56/+55
drm_pci_alloc and drm_pci_free are just very thin wrappers around dma_alloc_coherent, with a note that we should be removing them. Furthermore since commit de09d31dd38a50fdce106c15abd68432eebbd014 Author: Kirill A. Shutemov <[email protected]> Date: Fri Jan 15 16:51:42 2016 -0800 page-flags: define PG_reserved behavior on compound pages As far as I can see there's no users of PG_reserved on compound pages. Let's use PF_NO_COMPOUND here. drm_pci_alloc has been declared broken since it mixes GFP_COMP and SetPageReserved. Avoid this conflict by weaning ourselves off using the abstraction and using the dma functions directly. Reported-by: Taketo Kabe Closes: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by: Chris Wilson <[email protected]> Cc: <[email protected]> # v4.5+ Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit c6790dc22312f592c1434577258b31c48c72d52a) Signed-off-by: Jani Nikula <[email protected]>
2020-02-17selftests: forwarding: vxlan_bridge_1d: use more proper tos valueHangbin Liu1-3/+3
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by: Petr Machata <[email protected]> Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-17net: cnic: fix spelling mistake "reserverd" -> "reserved"Alexandre Belloni1-2/+2
The reserved member should be named reserved3. Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-17sctp: move the format error check out of __sctp_sf_do_9_1_abortXin Long1-9/+20
When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause") Reported-by: Hangbin Liu <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-17net: sched: correct flower port blockingJason Baron2-0/+10
tc flower rules that are based on src or dst port blocking are sometimes ineffective due to uninitialized stack data. __skb_flow_dissect() extracts ports from the skb for tc flower to match against. However, the port dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in key_control->flags. All callers of __skb_flow_dissect(), zero-out the key_control field except for fl_classify() as used by the flower classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to __skb_flow_dissect(), since key_control is allocated on the stack and may not be initialized. Since key_basic and key_control are present for all flow keys, let's make sure they are initialized. Fixes: 62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments") Co-developed-by: Eric Dumazet <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: Jason Baron <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-17Merge tag 'ecryptfs-5.6-rc3-fixes' of ↵Linus Torvalds6-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: - downgrade the eCryptfs maintenance status to "Odd Fixes" - change my email address - fix a couple memory leaks in error paths - stability improvement to avoid a needless BUG_ON() * tag 'ecryptfs-5.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: replace BUG_ON with error handling code eCryptfs: Replace deactivated email address MAINTAINERS: eCryptfs: Update maintainer address and downgrade status ecryptfs: fix a memory leak bug in ecryptfs_init_messaging() ecryptfs: fix a memory leak bug in parse_tag_1_packet()
2020-02-17net: mscc: fix in frame extractionHoratiu Vultur1-0/+8
Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted by reading chuncks of 4 bytes from a register. In case the IFH and frames were read corretly it would try to read the next frame. In case there are no more frames in the queue, it checks if there were any previous errors and in that case clear the queue. But this check will always succeed also when there are no errors. Because when extracting the IFH the error is checked against 4(number of bytes read) and then the error is set only if the extraction of the frame failed. So in a happy case where there are no errors the err variable is still 4. So it could be a case where after the check that there are no more frames in the queue, a frame will arrive in the queue but because the error is not reseted, it would try to flush the queue. So the frame will be lost. The fix consist in resetting the error after reading the IFH. Signed-off-by: Horatiu Vultur <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-17ASoC: sun8i-codec: Fix setting DAI data formatSamuel Holland1-1/+2
Use the correct mask for this two-bit field. This fixes setting the DAI data format to RIGHT_J or DSP_A. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Signed-off-by: Samuel Holland <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-02-17Merge tag 'for-5.6-rc1-tag' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "This is the fix for sleeping in a locked section bug reported by Dave Jones, caused by a patch dependence in development and pulled branches. I picked the existing patch over the fixup that Filipe sent, as it's a bit more generic fix. I've verified it with a specific test case, some rsync stress and one round of fstests" * tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't set path->leave_spinning for truncate
2020-02-17drm/i915/gt: Protect defer_request() from new waitersChris Wilson2-3/+10
Mika spotted <4>[17436.705441] general protection fault: 0000 [#1] PREEMPT SMP PTI <4>[17436.705447] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.5.0+ #1 <4>[17436.705449] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3805 05/16/2018 <4>[17436.705512] RIP: 0010:__execlists_submission_tasklet+0xc4d/0x16e0 [i915] <4>[17436.705516] Code: c5 4c 8d 60 e0 75 17 e9 8c 07 00 00 49 8b 44 24 20 49 39 c5 4c 8d 60 e0 0f 84 7a 07 00 00 49 8b 5c 24 08 49 8b 87 80 00 00 00 <48> 39 83 d8 fe ff ff 75 d9 48 8b 83 88 fe ff ff a8 01 0f 84 b6 05 <4>[17436.705518] RSP: 0018:ffffc9000012ce80 EFLAGS: 00010083 <4>[17436.705521] RAX: ffff88822ae42000 RBX: 5a5a5a5a5a5a5a5a RCX: dead000000000122 <4>[17436.705523] RDX: ffff88822ae42588 RSI: ffff8881e32a7908 RDI: ffff8881c429fd48 <4>[17436.705525] RBP: ffffc9000012cf00 R08: ffff88822ae42588 R09: 00000000fffffffe <4>[17436.705527] R10: ffff8881c429fb80 R11: 00000000a677cf08 R12: ffff8881c42a0aa8 <4>[17436.705529] R13: ffff8881c429fd38 R14: ffff88822ae42588 R15: ffff8881c429fb80 <4>[17436.705532] FS: 0000000000000000(0000) GS:ffff88822ed00000(0000) knlGS:0000000000000000 <4>[17436.705534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[17436.705536] CR2: 00007f858c76d000 CR3: 0000000005610003 CR4: 00000000003606e0 <4>[17436.705538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[17436.705540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4>[17436.705542] Call Trace: <4>[17436.705545] <IRQ> <4>[17436.705603] execlists_submission_tasklet+0xc0/0x130 [i915] which is us consuming a partially initialised new waiter in defer_requests(). We can prevent this by initialising the i915_dependency prior to making it visible, and since we are using a concurrent list_add/iterator mark them up to the compiler. Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f14f27b1663269a81ed62d3961fe70250a1a0623) Signed-off-by: Jani Nikula <[email protected]>
2020-02-17drm/i915/gt: Prevent queuing retire workers on the virtual engineChris Wilson2-0/+6
Virtual engines are fleeting. They carry a reference count and may be freed when their last request is retired. This makes them unsuitable for the task of housing engine->retire.work so assert that it is not used. Tvrtko tracked down an instance where we did indeed violate this rule. In virtual_submit_request, we flush a completed request directly with __i915_request_submit and this causes us to queue that request on the veng's breadcrumb list and signal it. Leading us down a path where we should not attach the retire. Reported-by: Tvrtko Ursulin <[email protected]> Fixes: dc93c9b69315 ("drm/i915/gt: Schedule request retirement when signaler idles") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f91d8156ab8afb32447cd2bf3189219bab943f18) Signed-off-by: Jani Nikula <[email protected]>
2020-02-17drm/i915/dsc: force full modeset whenever DSC is enabled at probeJani Nikula1-0/+18
We lack full state readout of DSC config, which may lead to DSC enable using a config that's all zeros, failing spectacularly. Force full modeset and thus compute config at probe to get a sane state, until we implement DSC state readout. Any fastset that did appear to work with DSC at probe, worked by coincidence. [1] is an example of a change that triggered the issue on TGL DSI DSC. [1] http://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: Manasi Navare <[email protected]> Cc: Vandita Kulkarni <[email protected]> Cc: Ville Syrjala <[email protected]> Cc: [email protected] Fixes: fbacb15ea814 ("drm/i915/dsc: add basic hardware state readout support") Acked-by: Matt Roper <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a4277aa398d76db109d6b8420934f68daf69a6c3) Signed-off-by: Jani Nikula <[email protected]>
2020-02-17drm/i915/ehl: Update port clock voltage level requirementsMatt Roper1-1/+3
Voltage level depends not only on the cdclk, but also on the DDI clock. Last time the bspec voltage level table for EHL was updated, we only updated the cdclk requirements, but forgot to account for the new port clock criteria. Bspec: 21809 Fixes: d147483884ed ("drm/i915/ehl: Update voltage level checks") Cc: José Roberto de Souza <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: José Roberto de Souza <[email protected]> (cherry picked from commit 9d5fd37ed7e26efdbe90f492d7eb8b53dcdb61d6) Signed-off-by: Jani Nikula <[email protected]>
2020-02-17drm/i915: Update drm/i915 bug filing URLJani Nikula3-7/+6
We've moved from bugzilla to gitlab. Cc: [email protected] Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ddae4d7af0bbe3b2051f1603459a8b24e9a19324) Signed-off-by: Jani Nikula <[email protected]>
2020-02-17MAINTAINERS: Update drm/i915 bug filing URLJani Nikula1-1/+1
We've moved from bugzilla to gitlab. Cc: [email protected] Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 3a6a4f0810c8ade6f1ff63c34aa9834176b9d88b) Signed-off-by: Jani Nikula <[email protected]>
2020-02-17tpm: Initialize crypto_id of allocated_banks to HASH_ALGO__LASTRoberto Sassu1-0/+2
chip->allocated_banks, an array of tpm_bank_info structures, contains the list of TPM algorithm IDs of allocated PCR banks. It also contains the corresponding ID of the crypto subsystem, so that users of the TPM driver can calculate a digest for a PCR extend operation. However, if there is no mapping between TPM algorithm ID and crypto ID, the crypto_id field of tpm_bank_info remains set to zero (the array is allocated and initialized with kcalloc() in tpm2_get_pcr_allocation()). Zero should not be used as value for unknown mappings, as it is a valid crypto ID (HASH_ALGO_MD4). Thus, initialize crypto_id to HASH_ALGO__LAST. Cc: [email protected] # 5.1.x Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Signed-off-by: Roberto Sassu <[email protected]> Reviewed-by: Petr Vorel <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.