aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-05arm64: dts: qcom: msm8916: Enable CoreSight STM componentGeorgi Djakov2-0/+28
Add DT binding for CoreSight System Trace Macrocell (STM) on msm8916, which can benefit the CoreSight development on DB410c. Signed-off-by: Georgi Djakov <[email protected]> Signed-off-by: Leo Yan <[email protected]> Acked-by: Stephan Gerhold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sc7280: Add qfprom nodeRajendra Nayak1-0/+13
Add the qfprom node and its properties for the sc7280 SoC. Signed-off-by: Rajendra Nayak <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sc7280: Fixup the cpufreq nodeSibi Sankar1-3/+3
Fixup the register regions used by the cpufreq node on SC7280 SoC to support per core L3 DCVS. Fixes: 7dbd121a2c58 ("arm64: dts: qcom: sc7280: Add cpufreq hw node") Signed-off-by: Sibi Sankar <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: ipq6018: correct TCSR block areaBaruch Siach1-3/+3
According to Bjorn Andersson[1], &tcsr_q6 base is 0x01937000 with size 0x21000. Adjust qcom,halt-regs offsets (add 0xe000) to match the new syscon base. Also, rename to just &tcsr as Kathiravan T suggested. [1] https://lore.kernel.org/r/YLgO0Aj1d4w9EcPv@yoga Signed-off-by: Baruch Siach <[email protected]> Link: https://lore.kernel.org/r/889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMIV Sujith Kumar Reddy1-0/+17
Add dai link in sc7180-trogdor.dtsi for supporting audio over DP Signed-off-by: V Sujith Kumar Reddy <[email protected]> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sc7180: Update lpass cpu node for audio over dpV Sujith Kumar Reddy1-6/+10
Updaate lpass dts node with HDMI reg, interrupt and iommu for supporting audio over dp. Signed-off-by: V Sujith Kumar Reddy <[email protected]> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sdm845-oneplus: add ipa firmware namesCaleb Connolly1-0/+1
Add the correct patch to the ipa firmware now that custom paths are supported. Signed-off-by: Caleb Connolly <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sdm845-oneplus-common: enable debug UARTCaleb Connolly1-0/+10
A labelled diagram showing the location of the Rx and Tx testpoints for the OnePlus 6 is available on the postmarketOS wiki: https://wiki.postmarketos.org/wiki/Serial_debugging:Cable_schematics The device uses 1.8v UART at a baud rate of 115200, bootloader output is also available here. Signed-off-by: Caleb Connolly <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sm8350: Rename GENI serial engine DT nodeRobert Foss3-3/+3
In order to conform with downstream and upstream for previous generations of this hardware, rename dt-node 'qupv3_id_1' to 'qupv3_id_0'. Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC") Signed-off-by: Robert Foss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sc7280: Remove pm8350 and pmr735b for sc7280-idpsatya priya1-24/+10
Remove pm8350 and pmr735b die temp nodes as these pmics are not present on this board. Correct the tabbing for pmk8350_vadc node. Fixes: fbd5a1d22607 ("arm64: dts: qcom: sc7280: Add ADC channel nodes for PMIC temperatures to sc7280-idp") Signed-off-by: satya priya <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sc7280: Add interconnect properties for USBSandeep Maheswaram1-0/+8
Add interconnect properties in USB DT nodes for sc7280. Signed-off-by: Sandeep Maheswaram <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 targetDmitry Baryshkov1-2/+1
Remove the bus clock from the mdss device node, in order to facilitate bus band width scaling on sm8250 target. The parent device MDSS will not vote for bus bw, instead the vote will be triggered by mdp device node. Since a minimum vote is required to turn on bus clock, and since mdp device node already has the bus clock, remove the clock from the mdss device. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sdm845: move bus clock to mdp node for sdm845 targetDmitry Baryshkov1-4/+4
Move the bus clock to mdp device node,in order to facilitate bus band width scaling on sdm845 target. The parent device MDSS will not vote for bus bw, instead the vote will be triggered by mdp device node. Since a minimum vote is required to turn on bus clock, move the clock node to mdp device from where the votes are requested. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sm8350: Add wakeup-parent to tlmmBjorn Andersson1-0/+1
Now that TLMM has the wakeup table, specify the Power Domain Controller to be the wakeup-parent of TLMM. Reviewed-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sc7180:: modified qfprom CORR size as per RAW sizeRavi Kumar Bokka1-1/+1
modified QFPROM controller CORRECTED region size as per RAW region size Signed-off-by: Ravi Kumar Bokka <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sm8250: Fix epss_l3 unit addressGeorgi Djakov1-1/+1
The unit address of the epss_l3 node is incorrect and does not match the address of its "reg" property. Let's fix it. Signed-off-by: Georgi Djakov <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Sibi Sankar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: msm8996: Add gpu cooling supportYassine Oudjana1-2/+18
Add cooling-cells property and cooling maps for the GPU. Signed-off-by: Yassine Oudjana <[email protected]> Link: https://lore.kernel.org/r/Ku7mRZ_q2mYDZQ048IPlAc8VOVhH8N4uENhMI-JXxjeiZxjbRRs40ZJYwREb_ScgCvtQgtdl1VRjoDd7CR_8vCrbWVe8n3MwyB1S3VbSDis=@protonmail.com Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: pm8004: Enable the PMIC peripherals by defaultKonrad Dybcio1-2/+0
It makes no sense to require one more step to enable the PMIC features. If the PMIC is present, it already has to be explicitly #included anyway. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05dt-bindings: arm: qcom: Drop qcom,mtpVinod Koul1-2/+1
qcom,mtp is used msm8916-mtp.dts but not documented, it is a generic mtp compatible and we have specfifc ones for each mtp so drop this arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed: ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916', 'qcom,mtp'] is too long Additional items are not allowed ('qcom,msm8916', 'qcom,mtp' were unexpected) Additional items are not allowed ('qcom,mtp' was unexpected) Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05dt-bindings: arm: qcom: Document alcatel,idol347 boardVinod Koul1-0/+2
Document the alcatel,idol347 board. It was missing leading to warning: arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed: Additional items are not allowed ('qcom,msm8916' was unexpected) Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: msm8996: don't use underscore in node nameVinod Koul1-2/+2
We have underscore (_) in node name leading to warning: arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'clock-output-names': ['xo_board'], 'phandle': [[115]]} Fix this by changing node name to use dash (-) Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: msm8994: don't use underscore in node nameVinod Koul1-2/+4
We have underscore (_) in node name leading to warning: arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'phandle': [[26]]} arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: sleep_clk: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[32768]]} Fix this by changing node name to use dash (-) Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] [bjorn: Added clock-output-names to satisfy parent_names] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sdm630: don't use underscore in node nameVinod Koul1-2/+2
We have underscore (_) in node name so fix that up as well. Fix this by changing node name to use dash (-) Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: ipq6018: drop '0x' from unit addressVinod Koul1-1/+1
Nodes need not contain '0x' for the unit address. Drop it to fix the below warning: arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: reserved-memory: 'memory@0x60000' does not match any of the regexes Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sdm660: use reg value for memory nodeVinod Koul1-1/+1
memory node like other node should be node@reg, which is missing in this case, so fix it up arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 1073741824, 0, 536870912]]} Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: ipq8074: fix pci node reg propertyVinod Koul1-8/+8
reg property should be array of values, here it is a single array, leading to below warning: arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:reg:0: [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed: [[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488]] is not of type 'null' [2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488] is too long arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:reg:0: [536870912, 3869, 536874784, 168, 524288, 8192, 537919488, 4096] is too long arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed: arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed: [[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488]] is not of type 'null' [2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488] is too long Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sdm630: don't use empty memory nodeVinod Koul1-2/+2
We expect bootloader to full memory details but passing empty values can give warning, so add a default value Signed-off-by: Vinod Koul <[email protected]> Tested-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: msm8998: don't use empty memory nodeVinod Koul1-2/+2
We expect bootloader to full memory details but passing empty values can give warning, so add a default value Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: msm8996: don't use empty memory nodeVinod Koul1-2/+2
We expect bootloader to full memory details but passing empty values can give warning, so add a default value Signed-off-by: Vinod Koul <[email protected]> Tested-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: sm6125: Add support for Sony Xperia 10IIMartin Botka2-0/+140
This commits add support for Sony Xperia 10II based on the SM6125 SoC. Currently working features: - dmesg output to bootloader preconfigured display - USB - eMMC - Volume down button Signed-off-by: Martin Botka <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-05arm64: dts: qcom: Add support for SM6125Martin Botka1-0/+566
This commits adds the Device tree file for SM6125 SoC. Signed-off-by: Martin Botka <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sm8250: Add DMA to I2C/SPIKonrad Dybcio1-40/+160
Add dma properties to I2C and SPI nodes to make sure DMA transfers can go through. While at it, fix up the property order in SPI nodes to make #address- and #size-cells go after all the meaningful properties. Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Acked-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm850-yoga: Enable IPABjorn Andersson2-13/+13
Shuffle memory regions to make firmware loading succeed and then enable the ipa device. Tested-by: Steev Klimaszewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630: Add DMA to I2C hostsKonrad Dybcio1-0/+16
Add DMA properties to I2C hosts to allow for DMA transfers. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630: Add I2C functions to I2C pinsKonrad Dybcio1-0/+16
This was overlooked earlier, fix it to ensure the busses can work properly. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-nile: Remove gpio-keys autorepeatKonrad Dybcio1-1/+0
The autorepeat feature is not needed on gpio-keys. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-nile: Enable uSD card slotKonrad Dybcio1-0/+8
Enable the internal uSD slot to let the user have more storage. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-nile: Specify ADSP firmware nameKonrad Dybcio1-0/+4
Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen.Konrad Dybcio2-1/+37
Delete the node on Ganges devices, as they use a different one. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsiKonrad Dybcio7-47/+23
After further consideration, it is not worth to keep another separate DTSI, as the differences between Nile and Ganges are very minimal. Instead, let's just address the minimal differences between Kirin and Mermaid. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-nile: Add Volume up keyKonrad Dybcio1-0/+10
Let's get loud! Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-nile: Add USBKonrad Dybcio1-0/+26
Enable and configure DWC3 and QUSB2 PHY to enable USB functionality on Nile and Ganges boards. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-nile: Use &labelsKonrad Dybcio1-26/+35
Refer to nodes by their labels to match the current convention. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630-xperia-nile: Add all RPM and fixed regulatorsAngeloGioacchino Del Regno1-1/+393
Add all of the RPM PM660/PM660L regulators and the fixed ones, defining the common electrical part of this platform. Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm660: Add required nodes for DSI1Konrad Dybcio1-4/+97
Configure the second DSI host/phy and account for them in the mmcc node. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630: Configure the camera subsystemAngeloGioacchino Del Regno1-0/+215
Add nodes for camss, cci and its pinctrl in order to bring up camera functionality. Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm630: Add IMEM nodeKonrad Dybcio1-0/+15
Add IMEM node and PIL reloc info as its child. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: Add device tree for SDM636Konrad Dybcio1-0/+23
This SoC is almost identical to its older brother, SDM660, with a few minor exceptions like the different GPU. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: sdm660: Make the DTS an overlay on top of 630Konrad Dybcio2-333/+117
There is SO MUCH common code between these two SoCs that it makes no sense to keep what is essentially a duplicate of 630.dtsi. Instead, it's better to just change the things that differ. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2021-08-04arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodesKonrad Dybcio2-0/+155
Add VADC, temperature alarm and thermal zones for pm660(l) to allow for temperature and voltage readouts and prevent PMIC overheating. Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.