| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use the BIT() marco to define the bits of this register.
For aesthetics, rename all the defines to remove the '_BIT' from the
name. Also, use ME4000_AI_STATUS_REG instead of ME4000_AI_CTRL_REG
when reading the register (they happen to be the same).
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use the helper function to check the range type instead of relying on the
value. For aesthetics, rename the local variable used for the range.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The chanspec channel, range, and aref are unsigned int values. Use the
correct types when extracting them.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The coemdi (*insn_read) functions are supposed to read insn->n values
from the hardware. Make this function work like the core expects.
Use the comedi_offset_munge() helper to munge the two's complement
values to offset binary.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use the comedi_timeout() helper to busy-wait for the analog input end-of-
conversion instead of the udelay().
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use the BIT() macro to define the bits of this register.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Rename this function so it has namespace associated with the driver.
The last entry of the chanlist needs the ME4000_AI_LIST_LAST_ENTRY bit
set to end the list. Fix the function and tidy if up a bit.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The comedi_lrange table for the analog inputs is inverted compared
to the values that need to be written to the ME4000_AI_CHANNEL_LIST_REG
to select the range.
Create a macro, ME4000_AI_LIST_RANGE(), to handle the inversion. Remove
the old defines and simplify the code a bit.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This define evaluates to 0 and is OR'ed with the 'entry' value that is
written to the ME4000_AI_CHANNEL_LIST_REG when the channel aref is a
single-ended type (AREF_GROUND or AREF_COMMON). OR'ing a zero value is
pretty silly, just remove it.
Remove the switch() in me4000_ai_insn_read() to simplify the code.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In comedi drivers the local variable used for the dev->private pointer is
normally named 'devpriv'. For aesthetics, rename the variables in this
driver. Also, rename the struct to follow the norm.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some of the boards supported by this driver can do analog input sample &
hold on 8 of the channels. The 'ai_sh_nchan' member of the boardinfo is
used to indicate which boards support this feature. To save a bit of space,
convert this member to a bit-field, 'can_do_sh_ai'. Note, this feature is
not currently supported.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This member of the boardinfo is always '4' for the boards that have an
analog output FIFO. Covert it to a bit-field, 'has_ao_fifo', to save a
bit of space.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
For the boards that have analog output capability, there are always
4 analog output channels. Convert the 'ao_nchan' member of the boardinfo
into a bit-field, 'has_ao', to save a bit of space and set the analog
output subdevice 'n_chan' to 4 when supported.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This member of the boardinfo is only used as a flag indicating that the
board supports differential analog inputs. Convert the member to a bit-
field to save a bit of space. For aesthetics, rename the member to
'can_do_diff_ai'.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Change the boardinfo 'has_counter' and 'ai_trig_analog' flags into
bit-fields to save a bit of space.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The maximum differential channel is half the subdevice 'n_chan'. Use
that instead and remove the need for the 'board' variable.
Also, the comedi core does no validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The 'board' pointer is only used in this function to verify that the
'chan' is valid for an aref of AREF_DIFF. For differential inputs, the
maximum channel is half the subdevice 'n_chan'. Use that instead and
remove the 'board' variable.
Also, the comedi core does not validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The comedi core validates that the 'chan' is valid for the subdevice
before calling the (*insn_read) operation. Remove the unnecessary check.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some of the boards supported by this driver do not have differential analog
inputs. Only set the SDF_DIFF subdev_flag when the board supports it.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
All the boards supported by this driver have analog inputs. They just
differ in the number of channels (32 or 16).
Always initialize the analog input subdevice in me4000_auto_attach().
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
All the boards supported by this driver have 32 digital I/O channels.
Remove the unnecessary boardinfo.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It is no need to check the packet[0] for sanity check when doing
elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad.
Signed-off by: Duson Lin <[email protected]>
Reviewed-by: Ulrik De Bie <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
remove_one() was not incrementing the key for the beginning of the
range, so not all entries were being removed. This resulted in
discards that were not unmapping all blocks.
Fixes: 4ec331c3ea ("dm btree: add dm_btree_remove_leaves()")
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
In
commit 99264a61dfcda41d86d0960cf2d4c0fc2758a773
Author: Daniel Vetter <[email protected]>
Date: Wed Apr 15 19:34:43 2015 +0200
drm/vblank: Fixup and document timestamp update/read barriers
I've switched vblank->count from atomic_t to unsigned long and
accidentally created an integer comparison bug in
drm_vblank_count_and_time since vblanke->count might overflow the u32
local copy and hence the retry loop never succeed.
Fix this by consistently using u32.
Cc: Michel Dänzer <[email protected]>
Reported-by: Michel Dänzer <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.2
There are a couple of small driver specific fixes here but the
overwhelming bulk of these changes are fixes to the topology ABI that
has been newly introduced in v4.2. Once this makes it into a release we
will have to firm this up but for now getting enhancements in before
they've made it into a release is the most expedient thing.
|
|
The increment of delay counter was 2 instructions:
Arithmatic Shfit Left (ASL) + set to 1 on overflow
This can be done in 1 using ROtate Left (ROL)
Suggested-by: Nigel Topham <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Signed-off-by: Vineet Gupta <[email protected]>
|
|
Pull sparc fix from David Miller:
"FPU register corruption bug fix"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix userspace FPU register corruptions.
|
|
Merge fixes from Andrew Morton:
"21 fixes"
* emailed patches from Andrew Morton <[email protected]>: (21 commits)
writeback: fix initial dirty limit
mm/memory-failure: set PageHWPoison before migrate_pages()
mm: check __PG_HWPOISON separately from PAGE_FLAGS_CHECK_AT_*
mm/memory-failure: give up error handling for non-tail-refcounted thp
mm/memory-failure: fix race in counting num_poisoned_pages
mm/memory-failure: unlock_page before put_page
ipc: use private shmem or hugetlbfs inodes for shm segments.
mm: initialize hotplugged pages as reserved
ocfs2: fix shift left overflow
kthread: export kthread functions
fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
lib/iommu-common.c: do not use 0xffffffffffffffffl for computing align_mask
mm/slub: allow merging when SLAB_DEBUG_FREE is set
signalfd: fix information leak in signalfd_copyinfo
signal: fix information leak in copy_siginfo_to_user
signal: fix information leak in copy_siginfo_from_user32
ocfs2: fix BUG in ocfs2_downconvert_thread_do_work()
fs, file table: reinit files_stat.max_files after deferred memory initialisation
mm, meminit: replace rwsem with completion
mm, meminit: allow early_pfn_to_nid to be used during runtime
...
|
|
If we have a series of events from userpsace, with %fprs=FPRS_FEF,
like follows:
ETRAP
ETRAP
VIS_ENTRY(fprs=0x4)
VIS_EXIT
RTRAP (kernel FPU restore with fpu_saved=0x4)
RTRAP
We will not restore the user registers that were clobbered by the FPU
using kernel code in the inner-most trap.
Traps allocate FPU save slots in the thread struct, and FPU using
sequences save the "dirty" FPU registers only.
This works at the initial trap level because all of the registers
get recorded into the top-level FPU save area, and we'll return
to userspace with the FPU disabled so that any FPU use by the user
will take an FPU disabled trap wherein we'll load the registers
back up properly.
But this is not how trap returns from kernel to kernel operate.
The simplest fix for this bug is to always save all FPU register state
for anything other than the top-most FPU save area.
Getting rid of the optimized inner-slot FPU saving code ends up
making VISEntryHalf degenerate into plain VISEntry.
Longer term we need to do something smarter to reinstate the partial
save optimizations. Perhaps the fundament error is having trap entry
and exit allocate FPU save slots and restore register state. Instead,
the VISEntry et al. calls should be doing that work.
This bug is about two decades old.
Reported-by: James Y Knight <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull amdgpu fixes from Alex Deucher:
"Just a few amdgpu fixes to make sure we report the proper firmware
information and number of render buffers to userspace and a typo in a
debugging function"
[ Pulling directly from Alex since Dave Airlie is on vacation - Linus ]
* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: set fw_version and feature_version for smu fw loading
drm/amdgpu: add feature version for SDMA ucode
drm/amdgpu: add feature version for RLC and MEC v2
drm/amdgpu: increment queue when iterating on this variable.
drm/amdgpu: fix rb setting for CZ
|
|
Pull TDA998x i2c driver fixes from Russell King:
"This fixes the double-checksumming of the AVI infoframe which was
resulting in the checksum always being zero. It went unnoticed as
none of my HDMI devices had a problem with this"
[ Pulling directly from rmk since Dave Airlie is on vacation - Linus ]
* 'drm-tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: fix bad checksum of the HDMI AVI infoframe
|
|
The initial value of global_wb_domain.dirty_limit set by
writeback_set_ratelimit() is zeroed out by the memset in
wb_domain_init().
Signed-off-by: Rabin Vincent <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Now page freeing code doesn't consider PageHWPoison as a bad page, so by
setting it before completing the page containment, we can prevent the
error page from being reused just after successful page migration.
I added TTU_IGNORE_HWPOISON for try_to_unmap() to make sure that the
page table entry is transformed into migration entry, not to hwpoison
entry.
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Dean Nelson <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The race condition addressed in commit add05cecef80 ("mm: soft-offline:
don't free target page in successful page migration") was not closed
completely, because that can happen not only for soft-offline, but also
for hard-offline. Consider that a slab page is about to be freed into
buddy pool, and then an uncorrected memory error hits the page just
after entering __free_one_page(), then VM_BUG_ON_PAGE(page->flags &
PAGE_FLAGS_CHECK_AT_PREP) is triggered, despite the fact that it's not
necessary because the data on the affected page is not consumed.
To solve it, this patch drops __PG_HWPOISON from page flag checks at
allocation/free time. I think it's justified because __PG_HWPOISON
flags is defined to prevent the page from being reused, and setting it
outside the page's alloc-free cycle is a designed behavior (not a bug.)
For recent months, I was annoyed about BUG_ON when soft-offlined page
remains on lru cache list for a while, which is avoided by calling
put_page() instead of putback_lru_page() in page migration's success
path. This means that this patch reverts a major change from commit
add05cecef80 about the new refcounting rule of soft-offlined pages, so
"reuse window" revives. This will be closed by a subsequent patch.
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Dean Nelson <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
"non anonymous thp" case is still racy with freeing thp, which causes
panic due to put_page() for refcount-0 page. It seems that closing up
this race might be hard (and/or not worth doing,) so let's give up the
error handling for this case.
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Dean Nelson <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When memory_failure() is called on a page which are just freed after
page migration from soft offlining, the counter num_poisoned_pages is
raised twi= ce. So let's fix it with using TestSetPageHWPoison.
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Dean Nelson <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Recently I addressed a few of hwpoison race problems and the patches are
merged on v4.2-rc1. It made progress, but unfortunately some problems
still remain due to less coverage of my testing. So I'm trying to fix
or avoid them in this series.
One point I'm expecting to discuss is that patch 4/5 changes the page
flag set to be checked on free time. In current behavior, __PG_HWPOISON
is not supposed to be set when the page is freed. I think that there is
no strong reason for this behavior, and it causes a problem hard to fix
only in error handler side (because __PG_HWPOISON could be set at
arbitrary timing.) So I suggest to change it.
With this patchset, hwpoison stress testing in official mce-test
testsuite (which previously failed) passes.
This patch (of 5):
In "just unpoisoned" path, we do put_page and then unlock_page, which is
a wrong order and causes "freeing locked page" bug. So let's fix it.
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Dean Nelson <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Acked-by: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The shm implementation internally uses shmem or hugetlbfs inodes for shm
segments. As these inodes are never directly exposed to userspace and
only accessed through the shm operations which are already hooked by
security modules, mark the inodes with the S_PRIVATE flag so that inode
security initialization and permission checking is skipped.
This was motivated by the following lockdep warning:
======================================================
[ INFO: possible circular locking dependency detected ]
4.2.0-0.rc3.git0.1.fc24.x86_64+debug #1 Tainted: G W
-------------------------------------------------------
httpd/1597 is trying to acquire lock:
(&ids->rwsem){+++++.}, at: shm_close+0x34/0x130
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: SyS_shmdt+0x4b/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_sem){++++++}:
lock_acquire+0xc7/0x270
__might_fault+0x7a/0xa0
filldir+0x9e/0x130
xfs_dir2_block_getdents.isra.12+0x198/0x1c0 [xfs]
xfs_readdir+0x1b4/0x330 [xfs]
xfs_file_readdir+0x2b/0x30 [xfs]
iterate_dir+0x97/0x130
SyS_getdents+0x91/0x120
entry_SYSCALL_64_fastpath+0x12/0x76
-> #2 (&xfs_dir_ilock_class){++++.+}:
lock_acquire+0xc7/0x270
down_read_nested+0x57/0xa0
xfs_ilock+0x167/0x350 [xfs]
xfs_ilock_attr_map_shared+0x38/0x50 [xfs]
xfs_attr_get+0xbd/0x190 [xfs]
xfs_xattr_get+0x3d/0x70 [xfs]
generic_getxattr+0x4f/0x70
inode_doinit_with_dentry+0x162/0x670
sb_finish_set_opts+0xd9/0x230
selinux_set_mnt_opts+0x35c/0x660
superblock_doinit+0x77/0xf0
delayed_superblock_init+0x10/0x20
iterate_supers+0xb3/0x110
selinux_complete_init+0x2f/0x40
security_load_policy+0x103/0x600
sel_write_load+0xc1/0x750
__vfs_write+0x37/0x100
vfs_write+0xa9/0x1a0
SyS_write+0x58/0xd0
entry_SYSCALL_64_fastpath+0x12/0x76
...
Signed-off-by: Stephen Smalley <[email protected]>
Reported-by: Morten Stevens <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Acked-by: Paul Moore <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Eric Paris <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 92923ca3aace ("mm: meminit: only set page reserved in the
memblock region") broke memory hotplug which expects the memmap for
newly added sections to be reserved until onlined by
online_pages_range(). This patch marks hotplugged pages as reserved
when adding new zones.
Signed-off-by: Mel Gorman <[email protected]>
Reported-by: David Vrabel <[email protected]>
Tested-by: David Vrabel <[email protected]>
Cc: Nathan Zimmer <[email protected]>
Cc: Robin Holt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When using a large volume, for example 9T volume with 2T already used,
frequent creation of small files with O_DIRECT when the IO is not
cluster aligned may clear sectors in the wrong place. This will cause
filesystem corruption.
This is because p_cpos is a u32. When calculating the corresponding
sector it should be converted to u64 first, otherwise it may overflow.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: <[email protected]> [4.0+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The s-Par visornic driver, currently in staging, processes a queue being
serviced by the an s-Par service partition. We can get a message that
something has happened with the Service Partition, when that happens, we
must not access the channel until we get a message that the service
partition is back again.
The visornic driver has a thread for processing the channel, when we get
the message, we need to be able to park the thread and then resume it
when the problem clears.
We can do this with kthread_park and unpark but they are not exported
from the kernel, this patch exports the needed functions.
Signed-off-by: David Kershner <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Acked-by: Neil Horman <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so that when fsnotify_destroy_mark_locked()
drops mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and thus the next
entry pointer we have cached may become stale and we dereference free
memory.
Fix the problem by first moving marks to free to a special private list
and then always free the first entry in the special list. This method
is safe even when entries from the list can disappear once we drop the
lock.
Signed-off-by: Jan Kara <[email protected]>
Reported-by: Ashish Sangwan <[email protected]>
Reviewed-by: Ashish Sangwan <[email protected]>
Cc: Lino Sanfilippo <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Using a 64 bit constant generates "warning: integer constant is too
large for 'long' type" on 32 bit platforms. Instead use ~0ul and
BITS_PER_LONG.
Detected by Andrew Morton on ARMD.
Signed-off-by: Sowmini Varadhan <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch fixes creation of new kmem-caches after enabling
sanity_checks for existing mergeable kmem-caches in runtime: before that
patch creation fails because unique name in sysfs already taken by
existing kmem-cache.
Unlike other debug options this doesn't change object layout and could
be enabled and disabled at any time.
Signed-off-by: Konstantin Khlebnikov <[email protected]>
Acked-by: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This function may copy the si_addr_lsb field to user mode when it hasn't
been initialized, which can leak kernel stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This function may copy the si_addr_lsb, si_lower and si_upper fields to
user mode when they haven't been initialized, which can leak kernel
stack data to user mode.
Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals. This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Russell King <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This function can leak kernel stack data when the user siginfo_t has a
positive si_code value. The top 16 bits of si_code descibe which fields
in the siginfo_t union are active, but they are treated inconsistently
between copy_siginfo_from_user32, copy_siginfo_to_user32 and
copy_siginfo_to_user.
copy_siginfo_from_user32 is called from rt_sigqueueinfo and
rt_tgsigqueueinfo in which the user has full control overthe top 16 bits
of si_code.
This fixes the following information leaks:
x86: 8 bytes leaked when sending a signal from a 32-bit process to
itself. This leak grows to 16 bytes if the process uses x32.
(si_code = __SI_CHLD)
x86: 100 bytes leaked when sending a signal from a 32-bit process to
a 64-bit process. (si_code = -1)
sparc: 4 bytes leaked when sending a signal from a 32-bit process to a
64-bit process. (si_code = any)
parsic and s390 have similar bugs, but they are not vulnerable because
rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code
to a different process. These bugs are also fixed for consistency.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Russell King <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The "BUG_ON(list_empty(&osb->blocked_lock_list))" in
ocfs2_downconvert_thread_do_work can be triggered in the following case:
ocfs2dc has firstly saved osb->blocked_lock_count to local varibale
processed, and then processes the dentry lockres. During the dentry
put, it calls iput and then deletes rw, inode and open lockres from
blocked list in ocfs2_mark_lockres_freeing. And this causes the
variable `processed' to not reflect the number of blocked lockres to be
processed, which triggers the BUG.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Dave Hansen reported the following;
My laptop has been behaving strangely with 4.2-rc2. Once I log
in to my X session, I start getting all kinds of strange errors
from applications and see this in my dmesg:
VFS: file-max limit 8192 reached
The problem is that the file-max is calculated before memory is fully
initialised and miscalculates how much memory the kernel is using. This
patch recalculates file-max after deferred memory initialisation. Note
that using memory hotplug infrastructure would not have avoided this
problem as the value is not recalculated after memory hot-add.
4.1: files_stat.max_files = 6582781
4.2-rc2: files_stat.max_files = 8192
4.2-rc2 patched: files_stat.max_files = 6562467
Small differences with the patch applied and 4.1 but not enough to matter.
Signed-off-by: Mel Gorman <[email protected]>
Reported-by: Dave Hansen <[email protected]>
Cc: Nicolai Stange <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Alex Ng <[email protected]>
Cc: Fengguang Wu <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 0e1cc95b4cc7 ("mm: meminit: finish initialisation of struct pages
before basic setup") introduced a rwsem to signal completion of the
initialization workers.
Lockdep complains about possible recursive locking:
=============================================
[ INFO: possible recursive locking detected ]
4.1.0-12802-g1dc51b8 #3 Not tainted
---------------------------------------------
swapper/0/1 is trying to acquire lock:
(pgdat_init_rwsem){++++.+},
at: [<ffffffff8424c7fb>] page_alloc_init_late+0xc7/0xe6
but task is already holding lock:
(pgdat_init_rwsem){++++.+},
at: [<ffffffff8424c772>] page_alloc_init_late+0x3e/0xe6
Replace the rwsem by a completion together with an atomic
"outstanding work counter".
[[email protected]: Barrier removal on the grounds of being pointless]
[[email protected]: Applied review feedback]
Signed-off-by: Nicolai Stange <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Alex Ng <[email protected]>
Cc: Fengguang Wu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|