| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is the killable version of wait_on_page_writeback.
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Cachefiles was relying on wait_page_key and wait_bit_key being the
same layout, which is fragile. Now that wait_page_key is exposed in
the pagemap.h header, we can remove that fragility
A comment on the need to maintain structure layout equivalence was added by
Linus[1] and that is no longer applicable.
Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3510ca20ece0150af6b10c77a74ff1b5c198e3e2 [1]
|
|
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle. Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.
Signed-off-by: David E. Box <[email protected]>
Reviewed-by: Sasha Neftin <[email protected]>
Cc: [email protected]
Reviewed-by: Rajneesh Bhardwaj <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.
Signed-off-by: David E. Box <[email protected]>
Suggested-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.
Fixes: 5ef9998c96b0 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: David E. Box <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
The debugfs directory '/sys/kernel/debug/energy_model' is needed before
the Energy Model registration can happen. With the recent change in
debugfs subsystem it's not allowed to create this directory at early
stage (core_initcall). Thus creating this directory would fail.
Postpone the creation of the EM debug dir to later stage: fs_initcall.
It should be safe since all clients: CPUFreq drivers, Devfreq drivers
will be initialized in later stages.
The custom debug log below prints the time of creation the EM debug dir
at fs_initcall and successful registration of EMs at later stages.
[ 1.505717] energy_model: creating rootdir
[ 3.698307] cpu cpu0: EM: created perf domain
[ 3.709022] cpu cpu1: EM: created perf domain
Fixes: 56348560d495 ("debugfs: do not attempt to create a new file before the filesystem is initalized")
Reported-by: Ionela Voinescu <[email protected]>
Signed-off-by: Lukasz Luba <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to the kunit tool from David Gow"
* tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Disable PAGE_POISONING under --alltests
kunit: tool: Fix a python tuple typing error
|
|
When a stacked block device inserts a request into another block device
using blk_insert_cloned_request, the request's nr_phys_segments field gets
recalculated by a call to blk_recalc_rq_segments in
blk_cloned_rq_check_limits. But blk_recalc_rq_segments does not know how to
handle multi-segment discards. For disk types which can handle
multi-segment discards like nvme, this results in discard requests which
claim a single segment when it should report several, triggering a warning
in nvme and causing nvme to fail the discard from the invalid state.
WARNING: CPU: 5 PID: 191 at drivers/nvme/host/core.c:700 nvme_setup_discard+0x170/0x1e0 [nvme_core]
...
nvme_setup_cmd+0x217/0x270 [nvme_core]
nvme_loop_queue_rq+0x51/0x1b0 [nvme_loop]
__blk_mq_try_issue_directly+0xe7/0x1b0
blk_mq_request_issue_directly+0x41/0x70
? blk_account_io_start+0x40/0x50
dm_mq_queue_rq+0x200/0x3e0
blk_mq_dispatch_rq_list+0x10a/0x7d0
? __sbitmap_queue_get+0x25/0x90
? elv_rb_del+0x1f/0x30
? deadline_remove_request+0x55/0xb0
? dd_dispatch_request+0x181/0x210
__blk_mq_do_dispatch_sched+0x144/0x290
? bio_attempt_discard_merge+0x134/0x1f0
__blk_mq_sched_dispatch_requests+0x129/0x180
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x47/0xe0
__blk_mq_delay_run_hw_queue+0x15b/0x170
blk_mq_sched_insert_requests+0x68/0xe0
blk_mq_flush_plug_list+0xf0/0x170
blk_finish_plug+0x36/0x50
xlog_cil_committed+0x19f/0x290 [xfs]
xlog_cil_process_committed+0x57/0x80 [xfs]
xlog_state_do_callback+0x1e0/0x2a0 [xfs]
xlog_ioend_work+0x2f/0x80 [xfs]
process_one_work+0x1b6/0x350
worker_thread+0x53/0x3e0
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
This patch fixes blk_recalc_rq_segments to be aware of devices which can
have multi-segment discards. It calculates the correct discard segment
count by counting the number of bio as each discard bio is considered its
own segment.
Fixes: 1e739730c5b9 ("block: optionally merge discontiguous discard bios into a single request")
Signed-off-by: David Jeffery <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: Laurence Oberman <[email protected]>
Link: https://lore.kernel.org/r/20210211143807.GA115624@redhat
Signed-off-by: Jens Axboe <[email protected]>
|
|
The GD_NEED_PART_SCAN is set by bdev_check_media_change to initiate
a partition scan while removing a block device. It should be cleared
after blk_drop_paritions because blk_drop_paritions could return
-EBUSY and then the consequence __blkdev_get has no chance to do
delete_partition if GD_NEED_PART_SCAN already cleared.
It causes some problems on some card readers. Ex. Realtek card
reader 0bda:0328 and 0bda:0158. The device node of the partition
will not disappear after the memory card removed. Thus the user
applications can not update the device mapping correctly.
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1920874
Signed-off-by: Chris Chiu <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The new Ubuntu GCC packages turn on -fcf-protection globally,
which causes a build failure in the x86 realmode code:
cc1: error: ‘-fcf-protection’ is not compatible with this target
Turn it off explicitly on compilers that understand this option.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
add null-check on function pointer before dereference on ops->cursor
Reported-by: [email protected]
Cc: stable <[email protected]>
Signed-off-by: Du Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Allow map and unmap of the client dma buffer only when the client is not
connected. The functions return -EPROTO if the client is already connected.
This is to fix the race when traffic may start or stop when buffer
is not available.
Cc: <[email protected]> #v5.11+
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Linux-phy subsystem gained mailing list and a patchwork instance. Add the
details to MAINTAINERS file
Signed-off-by: Vinod Koul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When retrying a deferred probe, any old defer reason string should be
discarded. Otherwise, if the probe is deferred again at a different spot,
but without setting a message, the now incorrect probe reason will remain.
This was observed with the i.MX I2C driver, which ultimately failed
to probe due to lack of the GPIO driver. The probe defer for GPIO
doesn't record a message, but a previous probe defer to clock_get did.
This had the effect that /sys/kernel/debug/devices_deferred listed
a misleading probe deferral reason.
Cc: stable <[email protected]>
Fixes: d090b70ede02 ("driver core: add deferring probe reason to devices_deferred property")
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
On some Intel platforms, audio noise can be detected due to
high pcie speed switch latency.
This patch leaverages ppfeaturemask to fix to the highest pcie
speed then disable pcie switching.
v2:
coding style fix
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4
bytes in total while the operations performed on this array through-out
the code base are only 2 bytes.
The "CcxRmState" field is fed only 2 bytes of data using memcpy():
(In rtllib_rx.c:1972)
memcpy(network->CcxRmState, &info_element->data[4], 2)
With "info_element->data[]" being a u8 array, if 2 bytes are written
into "CcxRmState" (whose one element is u16 size), then the 2 u8
elements from "data[]" gets squashed and written into the first element
("CcxRmState[0]") while the second element ("CcxRmState[1]") is never
fed with any data.
Same in file rtllib_rx.c:2522:
memcpy(dst->CcxRmState, src->CcxRmState, 2);
The above line duplicates "src" data to "dst" but only writes 2 bytes
(and not 4, which is the actual size). Again, only 1st element gets the
value while the 2nd element remains uninitialized.
This later makes operations done with CcxRmState unpredictable in the
following lines as the 1st element is having a squashed number while the
2nd element is having an uninitialized random number.
rtllib_rx.c:1973: if (network->CcxRmState[0] != 0)
rtllib_rx.c:1977: network->MBssidMask = network->CcxRmState[1] & 0x07;
network->MBssidMask is also of type u8 and not u16.
Fix this by changing the type of "CcxRmState" from u16 to u8 so that the
data written into this array and read from it make sense and are not
random values.
NOTE: The wrong initialization of "CcxRmState" can be seen in the
following commit:
commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")
The above commit created a file `rtl8192e/ieee80211.h` which used to
have the faulty line. The file has been deleted (or possibly renamed)
with the contents copied in to a new file `rtl8192e/rtllib.h` along with
additional code in the commit 94a799425eee (tagged in Fixes).
Fixes: 94a799425eee ("From: wlanfae <[email protected]> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: [email protected]
Signed-off-by: Atul Gopinathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The variable "info_element" is of the following type:
struct rtllib_info_element *info_element
defined in drivers/staging/rtl8192e/rtllib.h:
struct rtllib_info_element {
u8 id;
u8 len;
u8 data[];
} __packed;
The "len" field defines the size of the "data[]" array. The code is
supposed to check if "info_element->len" is greater than 4 and later
equal to 6. If this is satisfied then, the last two bytes (the 4th and
5th element of u8 "data[]" array) are copied into "network->CcxRmState".
Right now the code uses "memcpy()" with the source as "&info_element[4]"
which would copy in wrong and unintended information. The struct
"rtllib_info_element" has a size of 2 bytes for "id" and "len",
therefore indexing will be done in interval of 2 bytes. So,
"info_element[4]" would point to data which is beyond the memory
allocated for this pointer (that is, at x+8, while "info_element" has
been allocated only from x to x+7 (2 + 6 => 8 bytes)).
This patch rectifies this error by using "&info_element->data[4]" which
correctly copies the last two bytes of "data[]".
NOTE: The faulty line of code came from the following commit:
commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")
The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c`
which had the faulty line of code. This file has been deleted (or
possibly renamed) with the contents copied in to a new file
`rtl8192e/rtllib_rx.c` along with additional code in the commit
94a799425eee (tagged in Fixes).
Fixes: 94a799425eee ("From: wlanfae <[email protected]> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: [email protected]
Signed-off-by: Atul Gopinathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This LTE modem (M.2 card) has a bug in its power management:
there is some kind of race condition for U3 wake-up between the host and
the device. The modem firmware sometimes crashes/locks when both events
happen at the same time and the modem fully drops off the USB bus (and
sometimes re-enumerates, sometimes just gets stuck until the next
reboot).
Tested with the modem wired to the XHCI controller on an AMD 3015Ce
platform. Without the patch, the modem dropped of the USB bus 5 times in
3 days. With the quirk, it stayed connected for a week while the
'runtime_suspended_time' counter incremented as excepted.
Signed-off-by: Vincent Palatin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Do not log the successful-probe message until the tty device has been
registered.
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make sure to always claim the data interface and bail out if binding
fails.
Note that the driver had a check to verify that the data interface was
not already bound to a driver but would not detect other failures (e.g.
if the interface was not authorised).
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use negation consistently throughout the driver for NULL checks.
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Name the probe error labels after what they do rather than using
sequence numbers which is harder to review and maintain (e.g. may
require renaming unrelated labels when a label is added or removed).
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There's no need to clear the interface driver data on failed probe (and
driver core will clear it anyway).
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The interface driver data has already been set by
usb_driver_claim_interface() so drop the redundant subsequent
assignment.
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If tty-device registration fails the driver would fail to release the
data interface. When the device is later disconnected, the disconnect
callback would still be called for the data interface and would go about
releasing already freed resources.
Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()")
Cc: [email protected] # 3.9
Cc: Alexey Khoroshilov <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If tty-device registration fails the driver copy of any Country
Selection functional descriptor would end up being freed twice; first
explicitly in the error path and then again in the tty-port destructor.
Drop the first erroneous free that was left when fixing a tty-port
resource leak.
Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: [email protected] # 4.19
Cc: Jaejoong Kim <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use the correct DSS CTL registers for ICL DSI transcoders.
As a side effect, this also brings back the sanity check for trying to
use pipe DSC registers on pipe A on ICL.
Fixes: 8a029c113b17 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
References: http://lore.kernel.org/r/[email protected]
Cc: Manasi Navare <[email protected]>
Cc: Animesh Manna <[email protected]>
Cc: Vandita Kulkarni <[email protected]>
Cc: <[email protected]> # v5.11+
Reviewed-by: Manasi Navare <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 5706d02871240fdba7ddd6ab1cc31672fc95a90f)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The enabled_planes bitmask was supposed to track logically enabled
planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting
even disabled planes into the bitmask since
intel_plane_atomic_check_with_state() only takes the early exit
if the plane was disabled and stays disabled. I think I misread
the early said codepath to exit whenever the plane is logically
disabled, which is not true.
So let's fix this up properly and set the bit only when the plane
actually is logically enabled.
Cc: Manasi Navare <[email protected]>
Fixes: ee42ec19ca2e ("drm/i915: Track logically enabled planes for hw state")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Manasi Navare <[email protected]>
(cherry picked from commit 97bc7ffa1b1e9a8672e0a8e9a96680b0c3717427)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
By the specification the 0xF0000 - 0xF02FF range is only valid if the
LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support
otherwise.
Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <[email protected]> # v5.11
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 1663ad4936e0679443a315fe342f99636a2420dd)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
By the specification the 0xF0000-0xF02FF range is only valid when the
DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so.
Trying to detect LTTPRs returned corrupted values for the above DPCD
range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD
revision 1.2 connected.
v2: Add the actual version check.
v3: Fix s/DRPX/DPRX/ typo.
Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <[email protected]> # v5.11
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 264613b406eb0d74cd9ca582c717c5e2c5a975ea)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The spec requires to use at least 3.2ms for the AUX timeout period if
there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming
spec update makes this more specific, by requiring a 3.2ms minimum
timeout period for the LTTPR detection reading the 0xF0000-0xF0007
range (3.6.5.1).
Accordingly disable LTTPR detection until GLK, where the maximum timeout
we can set is only 1.6ms.
Link training in the non-transparent mode is known to fail at least on
some SKL systems with a WD19 dock on the link, which exposes an LTTPR
(see the References below). While this could have different reasons
besides the too short AUX timeout used, not detecting LTTPRs (and so not
using the non-transparent LT mode) fixes link training on these systems.
While at it add a code comment about the platform specific maximum
timeout values.
v2: Add a comment about the g4x maximum timeout as well. (Ville)
Reported-by: Takashi Iwai <[email protected]>
Reported-and-tested-by: Santiago Zarate <[email protected]>
Reported-and-tested-by: Bodo Graumann <[email protected]>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166
Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: <[email protected]> # v5.11
Cc: Takashi Iwai <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 984982f3ef7b240cd24c2feb2762d81d9d8da3c2)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
This failure is so common that logging an error here amounts
to spamming log files.
Reviewed-by: Bruno Thomsen <[email protected]>
Signed-off-by: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We have a cycle of callbacks scheduling works which submit
URBs with thos callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.
The issue leads to faults like:
[ 55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03
[ 55.075624] pgd = be866494
[ 55.078335] [6b6b6c03] *pgd=00000000
[ 55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc
xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common
xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle
iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables
des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii
cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6
xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED
xt_comment x_tables ipv6
[ 55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G
T 5.8.17 #1
[ 55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree)
[ 55.148304] Workqueue: events acm_softint [cdc_acm]
[ 55.153196] PC is at kobject_get+0x10/0xa4
[ 55.157302] LR is at usb_get_dev+0x14/0x1c
[ 55.161402] pc : [<8047c06c>] lr : [<80560448>] psr: 20000193
[ 55.167671] sp : bca39ea8 ip : 00007374 fp : bf6cbd80
[ 55.172899] r10: 00000000 r9 : bdd92284 r8 : bdd92008
[ 55.178128] r7 : 6b6b6b6b r6 : fffffffe r5 : 60000113 r4 : 6b6b6be3
[ 55.184658] r3 : 6b6b6b6b r2 : 00000111 r1 : 00000000 r0 : 6b6b6be3
[ 55.191191] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
[ 55.198417] Control: 10c5387d Table: bcf0c06a DAC: 00000051
[ 55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89)
[ 55.210439] Stack: (0xbca39ea8 to 0xbca3a000)
[ 55.214805] 9ea0: bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8
[ 55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c
[ 55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001
[ 55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00
[ 55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80
[ 55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae
[ 55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4
[ 55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000
[ 55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000
[ 55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c)
[ 55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8)
[ 55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0)
[ 55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm])
[ 55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8)
[ 55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc)
[ 55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180)
[ 55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c)
[ 55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8)
Tested-by: Bruno Thomsen <[email protected]>
Signed-off-by: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Counting break events is nice but we should actually report them to
the tty layer.
Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT")
Signed-off-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool.
however, dev->dev is actually set after calling init_dma_pools(), which
effectively makes dma_pool_create(..NULL) and cause crash.
To fix this issue, init dma only after dev->dev is set.
[ 1.317993] RIP: 0010:dma_pool_create+0x83/0x290
[ 1.323257] Call Trace:
[ 1.323390] ? pci_write_config_word+0x27/0x30
[ 1.323626] init_dma_pools+0x41/0x1a0 [snps_udc_core]
[ 1.323899] udc_pci_probe+0x202/0x2b1 [amd5536udc_pci]
Fixes: 7c51247a1f62 (usb: gadget: udc: Provide correct arguments for 'dma_pool_create')
Cc: stable <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It seems that on Intel Merrifield platform the USB PHY shouldn't be suspended.
Otherwise it can't be enabled by simply change the cable in the connector.
Enable corresponding quirk for the platform in question.
Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression")
Suggested-by: Serge Semin <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If the gadget driver doesn't specify a max_speed, then use the
controller's maximum supported speed as default. For DWC_usb32 IP, the
gadget's speed maybe limited to gen2x1 rate only if the driver's
max_speed is unknown. This scenario should not occur with the current
implementation since the default gadget driver's max_speed should always
be specified. However, to make the driver more robust and help with
readability, let's cover all the scenarios in __dwc3_gadget_set_speed().
Fixes: 450b9e9fabd8 ("usb: dwc3: gadget: Set speed only up to the max supported")
Cc: <[email protected]>
Signed-off-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/55ac7001af73bfe9bc750c6446ef4ac8cf6f9313.1615254129.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Set the dwc->gadget_max_speed to SuperSpeed Plus if the user sets the
ssp_rate. The udc_set_ssp_rate() is intended for setting the gadget's
speed to SuperSpeed Plus at the specified rate.
Fixes: 072cab8a0fe2 ("usb: dwc3: gadget: Implement setting of SSP rate")
Cc: <[email protected]>
Signed-off-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/0b2732e2f380d9912ee87f39dc82c2139223bad9.1615254129.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The ACPI probe starts failing since commit bea46b981515 ("usb: dwc3:
qcom: Add interconnect support in dwc3 driver"), because there is no
interconnect support for ACPI, and of_icc_get() call in
dwc3_qcom_interconnect_init() will just return -EINVAL.
Fix the problem by skipping interconnect init for ACPI probe, and then
the NULL icc_path_ddr will simply just scheild all ICC calls.
Fixes: bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver")
Signed-off-by: Shawn Guo <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If CONFIG_DEBUG_LOCK_ALLOC=n then mutex_lock_io_nested() maps to
mutex_lock() which is clearly wrong because mutex_lock() lacks the
io_schedule_prepare()/finish() invocations.
Map it to mutex_lock_io().
Fixes: f21860bac05b ("locking/mutex, sched/wait: Fix the mutex_lock_io_nested() define")
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
The pfn variable contains the page frame number as returned by the
pXX_pfn() functions, shifted to the right by PAGE_SHIFT to remove the
page bits. After page protection computations are done to it, it gets
shifted back to the physical address using page_level_shift().
That is wrong, of course, because that function determines the shift
length based on the level of the page in the page table but in all the
cases, it was shifted by PAGE_SHIFT before.
Therefore, shift it back using PAGE_SHIFT to get the correct physical
address.
[ bp: Rewrite commit message. ]
Fixes: dfaaec9033b8 ("x86: Add support for changing memory encryption attribute in early boot")
Signed-off-by: Isaku Yamahata <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Tom Lendacky <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/81abbae1657053eccc535c16151f63cd049dcb97.1616098294.git.isaku.yamahata@intel.com
|
|
The structures are used as place holders, so they are modified at run-time.
Obviously they may not be constants.
BUG: unable to handle page fault for address: d0643220
...
CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1
Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014
EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio]
This partially reverts the commit c4a164f41554d2899bed94bdcc499263f41787b4.
While at it, add a comment to avoid similar changes in the future.
Fixes: c4a164f41554 ("mfd: Constify static struct resources")
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Rikard Falkeborn <[email protected]>
Tested-by: Tong Zhang <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
|
|
DPU runtime resume will request for a min vote on the AXI bus as
it is a necessary step before turning ON the AXI clock.
The change does below
1) Move the icc path set before requesting runtime get_sync.
2) remove the dependency of hw catalog for min ib vote
as it is initialized at a later point.
Signed-off-by: Kalyan Thota <[email protected]>
Tested-by: Matthias Kaehlcke <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
Use a temporary variable to hold the return value from
dsa_tag_driver_get() instead of assigning it to dst->tag_ops. Leaving
an error value in dst->tag_ops can result in deferencing an invalid
pointer when a deferred switch configuration happens later.
Fixes: 357f203bb3b5 ("net: dsa: keep a copy of the tagging protocol in the DSA switch tree")
Signed-off-by: George McCollister <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-03-22
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
gcc-11 complains about a prototype declaration that is different
from the function definition:
drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
| ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
790 | u16 capi20_get_serial(u32 contr, u8 *serial)
| ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~
Change the definition to make them match.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The pseries join/suspend sequence in its current form was written with
the assumption that it was the only user of H_PROD and that it needn't
handle spurious successful returns from H_JOIN. That's wrong;
powerpc's paravirt spinlock code uses H_PROD, and CPUs entering
do_join() can be woken prematurely from H_JOIN with a status of
H_SUCCESS as a result. This causes all CPUs to exit the sequence
early, preventing suspend from occurring at all.
Add a 'done' boolean flag to the pseries_suspend_info struct, and have
the waking thread set it before waking the other threads. Threads
which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still
unset.
Fixes: 9327dc0aeef3 ("powerpc/pseries/mobility: use stop_machine for join/suspend")
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The atomic_t counter is the only shared state for the join/suspend
sequence so far, but that will change. Contain it in a
struct (pseries_suspend_info), and document its intended use. No
functional change.
Signed-off-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Device firmware doesn't handle ecpu bit for vhca state processing
events and commands. Instead device firmware refers to the unique
function id to distinguish SF of different PCI functions.
When ecpu bit is used, firmware returns a syndrome.
mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211)
mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22
Hence, avoid using ecpu bit.
Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality")
Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Vu Pham <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|