| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are a few system calls (pselect, ppoll, etc) which replace a task
sigmask while they are running in a kernel-space
When a task calls one of these syscalls, the kernel saves a current
sigmask in task->saved_sigmask and sets a syscall sigmask.
On syscall-exit-stop, ptrace traps a task before restoring the
saved_sigmask, so PTRACE_GETSIGMASK returns the syscall sigmask and
PTRACE_SETSIGMASK does nothing, because its sigmask is replaced by
saved_sigmask, when the task returns to user-space.
This patch fixes this problem. PTRACE_GETSIGMASK returns saved_sigmask
if it's set. PTRACE_SETSIGMASK drops the TIF_RESTORE_SIGMASK flag.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 29000caecbe8 ("ptrace: add ability to get/set signal-blocked mask")
Signed-off-by: Andrei Vagin <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix sparse warning:
fs/proc/kcore.c:591:19: warning:
symbol 'kcore_modules' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Mukesh Ojha <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Omar Sandoval <[email protected]>
Cc: James Morse <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix typo of kernel-doc parameter notation (there should be no space
between '@' and the parameter name).
Also fixes bogus kernel-doc notation output formatting.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 70b44595eafe9 ("mm, compaction: use free lists to quickly locate a migration source")
Signed-off-by: Randy Dunlap <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Reviewed-by: William Kucharski <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
While debugging something, I added a dump_page() into do_swap_page(),
and I got the splat from below. The issue happens when dereferencing
mapping->host in __dump_page():
...
else if (mapping) {
pr_warn("%ps ", mapping->a_ops);
if (mapping->host->i_dentry.first) {
struct dentry *dentry;
dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias);
pr_warn("name:\"%pd\" ", dentry);
}
}
...
Swap address space does not contain an inode information, and so
mapping->host equals NULL.
Although the dump_page() call was added artificially into
do_swap_page(), I am not sure if we can hit this from any other path, so
it looks worth fixing it. We can easily do that by checking
mapping->host first.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 1c6fb1d89e73c ("mm: print more information about mapping in __dump_page")
Signed-off-by: Oscar Salvador <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When MPOL_MF_STRICT was specified and an existing page was already on a
node that does not follow the policy, mbind() should return -EIO. But
commit 6f4576e3687b ("mempolicy: apply page table walker on
queue_pages_range()") broke the rule.
And commit c8633798497c ("mm: mempolicy: mbind and migrate_pages support
thp migration") didn't return the correct value for THP mbind() too.
If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it
reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an
existing page was already on a node that does not follow the policy.
And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or
MPOL_MF_MOVE_ALL was specified.
Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c
[[email protected]: tweak code comment]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 6f4576e3687b ("mempolicy: apply page table walker on queue_pages_range()")
Signed-off-by: Yang Shi <[email protected]>
Signed-off-by: Oscar Salvador <[email protected]>
Reported-by: Cyril Hrubis <[email protected]>
Suggested-by: Kirill A. Shutemov <[email protected]>
Acked-by: Rafael Aquini <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kbuild produces the below warning:
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: 5453a3df2a5eb49bc24615d4cf0d66b2aae05e5f
commit 3d3539018d2c ("mm: create the new vm_fault_t type")
reproduce:
# apt-get install sparse
git checkout 3d3539018d2cbd12e5af4a132636ee7fd8d43ef0
make ARCH=x86_64 allmodconfig
make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>> mm/memory.c:3968:21: sparse: incorrect type in assignment (different
>> base types) @@ expected restricted vm_fault_t [usertype] ret @@
>> got e] ret @@
mm/memory.c:3968:21: expected restricted vm_fault_t [usertype] ret
mm/memory.c:3968:21: got int
This patch converts to return vm_fault_t type for hugetlb_fault() when
CONFIG_HUGETLB_PAGE=n.
Regarding the sparse warning, Luc said:
: This is the expected behaviour. The constant 0 is magic regarding bitwise
: types but ({ ...; 0; }) is not, it is just an ordinary expression of type
: 'int'.
:
: So, IMHO, Souptick's patch is the right thing to do.
Link: http://lkml.kernel.org/r/20190318162604.GA31553@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Luc Van Oostenryck <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
IOMMUs using ARMv7 short-descriptor format require page tables (level 1
and 2) to be allocated within the first 4GB of RAM, even on 64-bit
systems.
For level 1/2 pages, ensure GFP_DMA32 is used if CONFIG_ZONE_DMA32 is
defined (e.g. on arm64 platforms).
For level 2 pages, allocate a slab cache in SLAB_CACHE_DMA32. Note that
we do not explicitly pass GFP_DMA[32] to kmem_cache_zalloc, as this is
not strictly necessary, and would cause a warning in mm/sl*b.c, as we
did not update GFP_SLAB_BUG_MASK.
Also, print an error when the physical address does not fit in
32-bit, to make debugging easier in the future.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: ad67f5a6545f ("arm64: replace ZONE_DMA with ZONE_DMA32")
Signed-off-by: Nicolas Boichat <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hsin-Yi Wang <[email protected]>
Cc: Huaisheng Ye <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Tomasz Figa <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Yingjoe Chen <[email protected]>
Cc: Yong Wu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "iommu/io-pgtable-arm-v7s: Use DMA32 zone for page tables",
v6.
This is a followup to the discussion in [1], [2].
IOMMUs using ARMv7 short-descriptor format require page tables (level 1
and 2) to be allocated within the first 4GB of RAM, even on 64-bit
systems.
For L1 tables that are bigger than a page, we can just use
__get_free_pages with GFP_DMA32 (on arm64 systems only, arm would still
use GFP_DMA).
For L2 tables that only take 1KB, it would be a waste to allocate a full
page, so we considered 3 approaches:
1. This series, adding support for GFP_DMA32 slab caches.
2. genalloc, which requires pre-allocating the maximum number of L2 page
tables (4096, so 4MB of memory).
3. page_frag, which is not very memory-efficient as it is unable to reuse
freed fragments until the whole page is freed. [3]
This series is the most memory-efficient approach.
stable@ note:
We confirmed that this is a regression, and IOMMU errors happen on 4.19
and linux-next/master on MT8173 (elm, Acer Chromebook R13). The issue
most likely starts from commit ad67f5a6545f ("arm64: replace ZONE_DMA
with ZONE_DMA32"), i.e. 4.15, and presumably breaks a number of Mediatek
platforms (and maybe others?).
[1] https://lists.linuxfoundation.org/pipermail/iommu/2018-November/030876.html
[2] https://lists.linuxfoundation.org/pipermail/iommu/2018-December/031696.html
[3] https://patchwork.codeaurora.org/patch/671639/
This patch (of 3):
IOMMUs using ARMv7 short-descriptor format require page tables to be
allocated within the first 4GB of RAM, even on 64-bit systems. On arm64,
this is done by passing GFP_DMA32 flag to memory allocation functions.
For IOMMU L2 tables that only take 1KB, it would be a waste to allocate
a full page using get_free_pages, so we considered 3 approaches:
1. This patch, adding support for GFP_DMA32 slab caches.
2. genalloc, which requires pre-allocating the maximum number of L2
page tables (4096, so 4MB of memory).
3. page_frag, which is not very memory-efficient as it is unable
to reuse freed fragments until the whole page is freed.
This change makes it possible to create a custom cache in DMA32 zone using
kmem_cache_create, then allocate memory using kmem_cache_alloc.
We do not create a DMA32 kmalloc cache array, as there are currently no
users of kmalloc(..., GFP_DMA32). These calls will continue to trigger a
warning, as we keep GFP_DMA32 in GFP_SLAB_BUG_MASK.
This implies that calls to kmem_cache_*alloc on a SLAB_CACHE_DMA32
kmem_cache must _not_ use GFP_DMA32 (it is anyway redundant and
unnecessary).
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Nicolas Boichat <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Huaisheng Ye <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Yong Wu <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Tomasz Figa <[email protected]>
Cc: Yingjoe Chen <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Hsin-Yi Wang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that
we always grab cluster locks in order of increasing inode number.
Unfortunately, we forget to swap the inode record buffer head pointers
when we've done this, which leads to incorrect bookkeepping when we're
trying to make the two inodes have the same refcount tree.
This has the effect of causing filesystem shutdowns if you're trying to
reflink data from inode 100 into inode 97, where inode 100 already has a
refcount tree attached and inode 97 doesn't. The reflink code decides
to copy the refcount tree pointer from 100 to 97, but uses inode 97's
inode record to open the tree root (which it doesn't have) and blows up.
This issue causes filesystem shutdowns and metadata corruption!
Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia
Fixes: 29ac8e856cb369 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded
memory to zones until online") introduced move_pfn_range_to_zone() which
calls memmap_init_zone() during onlining a memory block.
memmap_init_zone() will reset pagetype flags and makes migrate type to
be MOVABLE.
However, in __offline_pages(), it also call undo_isolate_page_range()
after offline_isolated_pages() to do the same thing. Due to commit
2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") changed
__first_valid_page() to skip offline pages, undo_isolate_page_range()
here just waste CPU cycles looping around the offlining PFN range while
doing nothing, because __first_valid_page() will return NULL as
offline_isolated_pages() has already marked all memory sections within
the pfn range as offline via offline_mem_sections().
Also, after calling the "useless" undo_isolate_page_range() here, it
reaches the point of no returning by notifying MEM_OFFLINE. Those pages
will be marked as MIGRATE_MOVABLE again once onlining. The only thing
left to do is to decrease the number of isolated pageblocks zone counter
which would make some paths of the page allocation slower that the above
commit introduced.
Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages
on ppc64, an "int" should still be enough to represent the number of
pageblocks there. Fix an incorrect comment along the way.
[[email protected]: v4]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 2ce13640b3f4 ("mm: __first_valid_page skip over offline pages")
Signed-off-by: Qian Cai <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]> [4.13+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
syzbot is hitting lockdep warning [1] due to trying to open a fifo
during an execve() operation. But we don't need to open non regular
files during an execve() operation, for all files which we will need are
the executable file itself and the interpreter programs like /bin/sh and
ld-linux.so.2 .
Since the manpage for execve(2) says that execve() returns EACCES when
the file or a script interpreter is not a regular file, and the manpage
for uselib(2) says that uselib() can return EACCES, and we use
FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non
regular file is requested with FMODE_EXEC set.
Since this deadlock followed by khungtaskd warnings is trivially
reproducible by a local unprivileged user, and syzbot's frequent crash
due to this deadlock defers finding other bugs, let's workaround this
deadlock until we get a chance to find a better solution.
[1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce
Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com>
Fixes: 8924feff66f35fe2 ("splice: lift pipe_lock out of splice_to_pipe()")
Signed-off-by: Tetsuo Handa <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: <[email protected]> [4.9+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add my email in the mailmap file to have a consistent shortlog output.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Changbin Du <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
atomic64_read() on ppc64le returns "long int", so fix the same way as
commit d549f545e690 ("drm/virtio: use %llu format string form
atomic64_t") by adding a cast to u64, which makes it work on all arches.
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:15,
from mm/debug.c:9:
mm/debug.c: In function 'dump_mm':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 19 has type 'long int' [-Wformat=]
#define KERN_SOH "A" /* ASCII Start Of Header */
^~~~~~
./include/linux/kern_levels.h:8:20: note: in expansion of macro
'KERN_SOH'
#define KERN_EMERG KERN_SOH "0" /* system is unusable */
^~~~~~~~
./include/linux/printk.h:297:9: note: in expansion of macro 'KERN_EMERG'
printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
mm/debug.c:133:2: note: in expansion of macro 'pr_emerg'
pr_emerg("mm %px mmap %px seqnum %llu task_size %lu"
^~~~~~~~
mm/debug.c:140:17: note: format string is defined here
"pinned_vm %llx data_vm %lx exec_vm %lx stack_vm %lx"
~~~^
%lx
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 70f8a3ca68d3 ("mm: make mm->pinned_vm an atomic64 counter")
Signed-off-by: Qian Cai <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Aneesh has reported that PPC triggers the following warning when
excercising DAX code:
IP set_pte_at+0x3c/0x190
LR insert_pfn+0x208/0x280
Call Trace:
insert_pfn+0x68/0x280
dax_iomap_pte_fault.isra.7+0x734/0xa40
__xfs_filemap_fault+0x280/0x2d0
do_wp_page+0x48c/0xa40
__handle_mm_fault+0x8d0/0x1fd0
handle_mm_fault+0x140/0x250
__do_page_fault+0x300/0xd60
handle_page_fault+0x18
Now that is WARN_ON in set_pte_at which is
VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep));
The problem is that on some architectures set_pte_at() cannot cope with
a situation where there is already some (different) valid entry present.
Use ptep_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PTE.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: b2770da64254 "mm: add vm_insert_mixed_mkwrite()"
Signed-off-by: Jan Kara <[email protected]>
Reported-by: "Aneesh Kumar K.V" <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Acked-by: Dan Williams <[email protected]>
Cc: Chandan Rajendra <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
set_tag() compiles away when CONFIG_KASAN_SW_TAGS=n, so make
arch_kasan_set_tag() a static inline function to fix warnings below.
mm/kasan/common.c: In function '__kasan_kmalloc':
mm/kasan/common.c:475:5: warning: variable 'tag' set but not used [-Wunused-but-set-variable]
u8 tag;
^~~
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
By default, cells in DT are 32-bit in size. The driver reads "ti,mode"
using the function of_property_read_u8() which causes the value to be
read incorrectly in little-endian architectures if the size is not
specified.
Make it explicit in the binding documentation that this prorperty must
be set as a 8-bit value.
Signed-off-by: Carlos Menin <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Commit 7cc7de93fad4 ("hwmon: (ntc_thermistor) Convert to new hwmon API")
converted the driver to use the new hwmon API, but introduced a subtle
error: The temperature type is no longer reported as temp1_type, but as
temp2_type.
Fixes: 7cc7de93fad4 ("hwmon: (ntc_thermistor) Convert to new hwmon API")
Signed-off-by: Guenter Roeck <[email protected]>
|
|
In the case of power sensor version 0xA0, the sensor indexing overlapped
with the "caps" power sensors, resulting in probe failure and kernel
warnings. Fix this by specifying the next index for each power sensor
version.
Fixes: 54076cb3b5ff ("hwmon (occ): Add sensor attributes and register ...")
Cc: [email protected]
Signed-off-by: Eddie James <[email protected]>
Tested-by: Joel Stanley <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Select REGMAP_I2C to avoid below build error:
ERROR: "__devm_regmap_init_i2c" [drivers/hwmon/w83773g.ko] undefined!
Fixes: ee249f271524 ("hwmon: Add W83773G driver")
Cc: [email protected]
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
A check for vif is made in vnt_interrupt_work.
There is a small chance of leaving interrupt disabled while vif
is NULL and the work hasn't been scheduled.
Signed-off-by: Malcolm Priestley <[email protected]>
CC: [email protected] # v4.2+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
After commit 419d6efc50e9, kernel cannot be crashed in the namei
path. However, corrupted nameoff can do harm in the process of
readdir for scenerios without dm-verity as well. Fix it now.
Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations")
Cc: <[email protected]> # 4.19+
Signed-off-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If a device has an exclusion range specified in the IVRS
table, this region needs to be reserved in the iova-domain
of that device. This hasn't happened until now and can cause
data corruption on data transfered with these devices.
Treat exclusion ranges as reserved regions in the iommu-core
to fix the problem.
Fixes: be2a022c0dd0 ('x86, AMD IOMMU: add functions to parse IOMMU memory mapping requirements for devices')
Signed-off-by: Joerg Roedel <[email protected]>
Reviewed-by: Gary R Hook <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.1-rc3
Here's a fix for a long-standing refcount issue in the mos7720 parport
implementation, and a set of device id updates.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <[email protected]>
* tag 'usb-serial-5.1-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Olicard 600
USB: serial: cp210x: add new device id
USB: serial: mos7720: fix mos_parport refcount imbalance on error path
USB: serial: option: set driver_info for SIM5218 and compatibles
USB: serial: ftdi_sio: add additional NovaTech products
USB: serial: option: add support for Quectel EM12
|
|
The nvm_image is a large struct qedi_nvm_iscsi_image object of over 24K so
don't declare it on the stack just for a sizeof requirement; use sizeof on
struct qedi_nvm_iscsi_image instead.
Fixes: c77a2fa3ff8f ("scsi: qedi: Add the CRC size within iSCSI NVM image")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Manish Rangankar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Backspace is not working on some terminal emulators which do not send the
key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127).
But currently only '^?' is handled. Let's also handle '^H' for those
terminals.
Signed-off-by: Changbin Du <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v5.1-rc2
One deadlock fix on f_hid. NET2280 got a fix on its dequeue
implementation and a fix for overrun of OUT messages.
DWC3 learned about another Intel product: Comment Lake PCH.
NET2272 got a similar fix to NET2280 on its dequeue implementation.
* tag 'fixes-for-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
USB: gadget: f_hid: fix deadlock in f_hidg_write()
usb: gadget: net2272: Fix net2272_dequeue()
usb: gadget: net2280: Fix net2280_dequeue()
usb: gadget: net2280: Fix overrun of OUT messages
usb: dwc3: pci: add support for Comet Lake PCH ID
|
|
Remove the unused @size argument and move it into a header file, so it
can be inlined.
[ bp: Massage. ]
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: linux-efi <[email protected]>
Cc: [email protected]
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
IS_ENABLED should generally use CONFIG_ prefaced symbols and
it doesn't appear as if there is a CMODEL_MEDLOW define.
Signed-off-by: Joe Perches <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The FIXMAP area overlaps with VMALLOC area in Linux-5.1-rc1 hence we get
below warning in Linux RISC-V 32bit kernel. This warning does not show-up
in Linux RISC-V 64bit kernel due to large VMALLOC area.
WARNING: CPU: 0 PID: 22 at mm/vmalloc.c:150 vmap_page_range_noflush+0x134/0x15c
Modules linked in:
CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.1.0-rc1-00005-gebc2f658040e #1
Workqueue: events pcpu_balance_workfn
Call Trace:
[<c002b950>] walk_stackframe+0x0/0xa0
[<c002baac>] show_stack+0x28/0x32
[<c0587354>] dump_stack+0x62/0x7e
[<c002fdee>] __warn+0x98/0xce
[<c002fe52>] warn_slowpath_null+0x2e/0x3c
[<c00e71ce>] vmap_page_range_noflush+0x134/0x15c
[<c00e7886>] map_kernel_range_noflush+0xc/0x14
[<c00d54b8>] pcpu_populate_chunk+0x19e/0x236
[<c00d610e>] pcpu_balance_workfn+0x448/0x464
[<c00408d6>] process_one_work+0x16c/0x2ea
[<c0040b46>] worker_thread+0xf2/0x3b2
[<c004519a>] kthread+0xce/0xdc
[<c002a974>] ret_from_exception+0x0/0xc
This patch fixes above warning by placing FIXMAP area below VMALLOC area.
Fixes: f2c17aabc917 ("RISC-V: Implement compile-time fixed mappings")
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
On pseries, TLB multihit are reported as D-Cache Multihit. This is because
the wrongly populated mc_err_types[] array. Per PAPR, TLB error type is 0x04
and mc_err_types[4] points to "D-Cache" instead of "TLB" string. Fixup the
mc_err_types[] array.
Machine check error type per PAPR:
0x00 = Uncorrectable Memory Error (UE)
0x01 = SLB error
0x02 = ERAT Error
0x04 = TLB error
0x05 = D-Cache error
0x07 = I-Cache error
Fixes: 8f0b80561f21 ("powerpc/pseries: Display machine check error details.")
Cc: [email protected] # v4.20+
Reported-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Mahesh Salgaonkar <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
shadow mm's pin count got increased in workload preparation phase, which
is after workload scanning.
it will get decreased in complete_current_workload() anyway after
workload completion.
Sometimes, if a workload meets a scanning error, its shadow mm pin count
will not get increased but will get decreased in the end.
This patch lets shadow mm's pin count not go below 0.
Fixes: 2707e4446688 ("drm/i915/gvt: vGPU graphics memory virtualization")
Cc: [email protected]
Cc: [email protected] #4.14+
Signed-off-by: Yan Zhao <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
in workload creation routine, if any failure occurs, do not queue this
workload for delivery. if this failure is fatal, enter into failsafe
mode.
Fixes: 6d76303553ba ("drm/i915/gvt: Move common vGPU workload creation into scheduler.c")
Cc: [email protected] #4.19+
Cc: [email protected]
Signed-off-by: Yan Zhao <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
gpio fixes for v5.1-rc3
- fix for a potential NULL-pointer dereference in the aspeed driver
- revert of the commit using the new gpio_set_config() when setting
debaunce and transitory state config as it caused a regression in
the aspeed driver
- two fixes for gpio-mockup for debugfs problems introduced in the
last merge window
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.2-rc3:
- fix mmap range checks
- fix gvt ppgtt mm LRU list access races
- fix selftest error pointer check
- fix a macro definition (pre-emptive for potential further backports)
- fix one AML SKU ULX status
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
__netif_receive_skb_list_ptype() leaves skb->next poisoned before passing
it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA
setup) crashes like:
[ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c
[ 88.618666] Oops[#1]:
[ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473
[ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850
[ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000
[ 88.642526] $ 8 : 00000000 49600000 00000001 00000001
[ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41
[ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd
[ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800
[ 88.665793] $24 : 00000000 8011e658
[ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c
[ 88.677427] Hi : 00000003
[ 88.680622] Lo : 7b5b4220
[ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188
[ 88.696734] Status: 10000404 IEp
[ 88.700422] Cause : 50000008 (ExcCode 02)
[ 88.704874] BadVA : 0000000e
[ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi))
[ 88.713005] Modules linked in:
[ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c
[ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000
[ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c
[ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50
[ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800
[ 88.771770] ...
[ 88.774483] Call Trace:
[ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188
[ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4
[ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0
[ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140
[ 88.805526] [<805a68f4>] ip_forward+0x364/0x560
[ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4
[ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58
[ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac
[ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c
[ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394
[ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828
[ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc
[ 88.850835] [<806ad300>] __do_softirq+0x178/0x338
[ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100
[ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144
[ 88.866477] [<80105974>] handle_int+0x14c/0x158
[ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40
[ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a
[ 88.887332]
[ 88.888982] ---[ end trace eb863d007da11cf1 ]---
[ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt
[ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fix this by pulling skb off the sublist and zeroing skb->next pointer
before calling ptype callback.
Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Reviewed-by: Edward Cree <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
into drm-fixes
- One freesync/VRR fix.
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When it is to cleanup net namespace, rds_tcp_exit_net() will call
rds_tcp_kill_sock(), if t_sock is NULL, it will not call
rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free
connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in
net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect()
and reference 'net' which has already been freed.
In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before
sock->ops->connect, but if connect() is failed, it will call
rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always
failed, rds_connect_worker() will try to reconnect all the time, so
rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the
connections.
Therefore, the condition !tc->t_sock is not needed if it is going to do
cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always
NULL, and there is on other path to cancel cp_conn_w and free
connection. So this patch is to fix this.
rds_tcp_kill_sock():
...
if (net != c_net || !tc->t_sock)
...
Acked-by: Santosh Shilimkar <[email protected]>
==================================================================
BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28
net/ipv4/af_inet.c:340
Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721
CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11
Hardware name: linux,dummy-virt (DT)
Workqueue: krdsd rds_connect_worker
Call trace:
dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x120/0x188 lib/dump_stack.c:113
print_address_description+0x68/0x278 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x21c/0x348 mm/kasan/report.c:409
__asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429
inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340
__sock_create+0x4f8/0x770 net/socket.c:1276
sock_create_kern+0x50/0x68 net/socket.c:1322
rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114
rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175
process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
kthread+0x2f0/0x378 kernel/kthread.c:255
ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117
Allocated by task 687:
save_stack mm/kasan/kasan.c:448 [inline]
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553
kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490
slab_post_alloc_hook mm/slab.h:444 [inline]
slab_alloc_node mm/slub.c:2705 [inline]
slab_alloc mm/slub.c:2713 [inline]
kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718
kmem_cache_zalloc include/linux/slab.h:697 [inline]
net_alloc net/core/net_namespace.c:384 [inline]
copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424
create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107
unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206
ksys_unshare+0x340/0x628 kernel/fork.c:2577
__do_sys_unshare kernel/fork.c:2645 [inline]
__se_sys_unshare kernel/fork.c:2643 [inline]
__arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:47 [inline]
el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83
el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129
el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960
Freed by task 264:
save_stack mm/kasan/kasan.c:448 [inline]
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521
kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528
slab_free_hook mm/slub.c:1370 [inline]
slab_free_freelist_hook mm/slub.c:1397 [inline]
slab_free mm/slub.c:2952 [inline]
kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968
net_free net/core/net_namespace.c:400 [inline]
net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407
net_drop_ns net/core/net_namespace.c:406 [inline]
cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569
process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
kthread+0x2f0/0x378 kernel/kthread.c:255
ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117
The buggy address belongs to the object at ffff8003496a3f80
which belongs to the cache net_namespace of size 7872
The buggy address is located 1796 bytes inside of
7872-byte region [ffff8003496a3f80, ffff8003496a5e40)
The buggy address belongs to the page:
page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000
index:0x0 compound_mapcount: 0
flags: 0xffffe0000008100(slab|head)
raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000
raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 467fa15356ac("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Mao Wenan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The flow action buffer can be resized if it's not big enough to contain
all the requested flow actions. However, this resize doesn't take into
account the new requested size, the buffer is only increased by a factor
of 2x. This might be not enough to contain the new data, causing a
buffer overflow, for example:
[ 42.044472] =============================================================================
[ 42.045608] BUG kmalloc-96 (Not tainted): Redzone overwritten
[ 42.046415] -----------------------------------------------------------------------------
[ 42.047715] Disabling lock debugging due to kernel taint
[ 42.047716] INFO: 0x8bf2c4a5-0x720c0928. First byte 0x0 instead of 0xcc
[ 42.048677] INFO: Slab 0xbc6d2040 objects=29 used=18 fp=0xdc07dec4 flags=0x2808101
[ 42.049743] INFO: Object 0xd53a3464 @offset=2528 fp=0xccdcdebb
[ 42.050747] Redzone 76f1b237: cc cc cc cc cc cc cc cc ........
[ 42.051839] Object d53a3464: 6b 6b 6b 6b 6b 6b 6b 6b 0c 00 00 00 6c 00 00 00 kkkkkkkk....l...
[ 42.053015] Object f49a30cc: 6c 00 0c 00 00 00 00 00 00 00 00 03 78 a3 15 f6 l...........x...
[ 42.054203] Object acfe4220: 20 00 02 00 ff ff ff ff 00 00 00 00 00 00 00 00 ...............
[ 42.055370] Object 21024e91: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 42.056541] Object 070e04c3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 42.057797] Object 948a777a: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 42.059061] Redzone 8bf2c4a5: 00 00 00 00 ....
[ 42.060189] Padding a681b46e: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
Fix by making sure the new buffer is properly resized to contain all the
requested data.
BugLink: https://bugs.launchpad.net/bugs/1813244
Signed-off-by: Andrea Righi <[email protected]>
Acked-by: Pravin B Shelar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jakub Kicinski says:
====================
nfp: fix retcode and disable netpoll on representors
This series avoids a potential crash on nfp representor devices
when netpoll is in use. If transmitting the frame through underlying
vNIC fails we'd return an error code (by passing on error code from
__dev_queue_xmit()) and cause double free in netpoll code.
Fix the error code and disable netpoll on reprs altogether.
IRQ-safety of locking the queues and calling __dev_queue_xmit()
is questionable.
Big thanks to John Hurley for debugging and narrowing down
the trace log after I gave up! :)
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
NFP reprs are software device on top of the PF's vNIC.
The comment above __dev_queue_xmit() sayeth:
When calling this method, interrupts MUST be enabled. This is because
the BH enable code must have IRQs enabled so that it will not deadlock.
For netconsole we can't guarantee IRQ state, let's just
disable netpoll on representors to be on the safe side.
When the initial implementation of NFP reprs was added by the
commit 5de73ee46704 ("nfp: general representor implementation")
.ndo_poll_controller was required for netpoll to be enabled.
Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: John Hurley <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dev_queue_xmit() may return error codes as well as netdev_tx_t,
and it always consumes the skb. Make sure we always return a
correct netdev_tx_t value.
Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: John Hurley <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
net_hash_mix() currently uses kernel address of a struct net,
and is used in many places that could be used to reveal this
address to a patient attacker, thus defeating KASLR, for
the typical case (initial net namespace, &init_net is
not dynamically allocated)
I believe the original implementation tried to avoid spending
too many cycles in this function, but security comes first.
Also provide entropy regardless of CONFIG_NET_NS.
Fixes: 0b4419162aa6 ("netns: introduce the net_hash_mix "salt" for hashes")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Amit Klein <[email protected]>
Reported-by: Benny Pinkas <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This is a Qualcomm based device with a QMI function on interface 4.
It is mode switched from 2020:2030 using a standard eject message.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2020 ProdID=2031 Rev= 2.32
S: Manufacturer=Mobile Connect
S: Product=Mobile Connect
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add flow_dissect for qca tagged packet to get the right hash.
Signed-off-by: Xiaofei Shen <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"PCI fixes:
- Clear level-triggered interrupts for the bandwidth notification
supported added for v5.1 (Alexandru Gagniuc)
- Clear bandwidth notification interrupts before enabling them (Lukas
Wunner)
- Report post-enumeration bandwidth changes only once for
multi-function devices (Lukas Wunner)"
* tag 'pci-v5.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/LINK: Deduplicate bandwidth reports for multi-function devices
PCI/LINK: Clear bandwidth notification interrupt before enabling it
PCI/LINK: Supply IRQ handler so level-triggered IRQs are acked
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-03-26
This series contains updates to igb, ixgbe, i40e and fm10k.
Jake fixes an issue with PTP in i40e where a previous commit resulted
in a regression where the driver would interpret small negative
adjustments as large positive additions, resulting in incorrect
behavior.
Arvind Sankar fixes an issue in igb where a previous commit would cause
a warning in the PCI pm core and resulted in pci_pm_runtime_suspend
would not call pci_save_state or pci_finish_runtime_suspend.
Ivan Vecera fixes MDIO bus registration with ixgbe, where the driver was
ignoring errors returned when registering and would leave the pointer in
a NULL state which triggered a BUG when un-registering.
Stefan Assmann fixes the check for Wake-On-LAN for i40e, which only
supports magic packet.
Yue Haibing fixes a potential NULL pointer de-reference in fm10k by
adding a simple check if the value is NULL.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Perf fails to parse uncore event alias, for example:
# perf stat -e unc_m_clockticks -a --no-merge sleep 1
event syntax error: 'unc_m_clockticks'
\___ parser error
Current code assumes that the event alias is from one specific PMU.
To find the PMU, perf strcmps the PMU name of event alias with the real
PMU name on the system.
However, the uncore event alias may be from multiple PMUs with common
prefix. The PMU name of uncore event alias is the common prefix.
For example, UNC_M_CLOCKTICKS is clock event for iMC, which include 6
PMUs with the same prefix "uncore_imc" on a skylake server.
The real PMU names on the system for iMC are uncore_imc_0 ...
uncore_imc_5.
The strncmp is used to only check the common prefix for uncore event
alias.
With the patch:
# perf stat -e unc_m_clockticks -a --no-merge sleep 1
Performance counter stats for 'system wide':
723,594,722 unc_m_clockticks [uncore_imc_5]
724,001,954 unc_m_clockticks [uncore_imc_3]
724,042,655 unc_m_clockticks [uncore_imc_1]
724,161,001 unc_m_clockticks [uncore_imc_4]
724,293,713 unc_m_clockticks [uncore_imc_2]
724,340,901 unc_m_clockticks [uncore_imc_0]
1.002090060 seconds time elapsed
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: [email protected]
Fixes: ea1fa48c055f ("perf stat: Handle different PMU names with common prefix")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Unlike python2, python3 strings are not compatible with byte strings.
That results in disassembly not working for the branches reports. Fixup
those places overlooked in the port to python3.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Fixes: beda0e725e5f ("perf script python: Add Python3 support to exported-sql-viewer.py")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM fixes for 5.1
- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups
|
|
pyside version 1 fails to handle python3 large integers in some cases,
resulting in Qt getting into a never-ending loop. This affects:
samples Table
samples_view Table
All branches Report
Selected branches Report
Add workarounds for those cases.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Fixes: beda0e725e5f ("perf script python: Add Python3 support to exported-sql-viewer.py")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|