aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-31io_uring: ensure fput() called correspondingly when direct install failsXiaoguang Wang1-0/+5
io_fixed_fd_install() may fail for short of free fixed file bitmap, in this case, need to call fput() correspondingly. Signed-off-by: Xiaoguang Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-05-31io_uring: wire up allocated direct descriptors for socketJens Axboe1-2/+2
The socket support was merged in an earlier branch that didn't yet have support for allocating direct descriptors, hence only open and accept got support for that. Do the one-liner to enable it now, so we have consistent support for any request that can instantiate a file/direct descriptor. Reviewed-by: Hao Xu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-05-31io_uring: fix a memory leak of buffer group list on exitJens Axboe1-0/+1
If we use a buffer group ID that is large enough to require io_uring to allocate it, then we don't correctly free it if the cleanup is deferred to the ring exit. The explicit removal paths are fine. Fixes: 9cfc7e94e42b ("io_uring: get rid of hashed provided buffer groups") Signed-off-by: Jens Axboe <[email protected]>
2022-05-31io_uring: move shutdown under the general net sectionJens Axboe1-36/+29
Gets rid of some ifdefs and enables use of the net defines for when CONFIG_NET isn't set. Signed-off-by: Jens Axboe <[email protected]>
2022-05-31io_uring: unify calling convention for async prep handlingJens Axboe1-2/+12
Make them consistent in preparation for defining a req async prep handler. The readv/writev requests share a prep handler, move it one level down so the initial one is consistent with the others. Signed-off-by: Jens Axboe <[email protected]>
2022-05-31bonding: show NS IPv6 targets in proc master infoHangbin Liu1-0/+15
When adding bond new parameter ns_targets. I forgot to print this in bond master proc info. After updating, the bond master info will look like: ARP IP target/s (n.n.n.n form): 192.168.1.254 NS IPv6 target/s (XX::XX form): 2022::1, 2022::2 Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Reported-by: Li Liang <[email protected]> Signed-off-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-31io_uring: add io_op_defs 'def' pointer in req init and issueJens Axboe1-7/+10
Define and set it when appropriate, and use it consistently in the function rather than using io_op_defs[opcode]. Reviewed-by: Kanchan Joshi <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-05-31ASoC: da7219: Small fixes for jack detection and removalMark Brown1-3/+15
Merge series from Adam Thomson <[email protected]>: This series contains 2 small fixes around the AAD part of DA7219, particularly in relation to jack pole detection on certain active headsets, and tidy up when a jack is removed.
2022-05-31x86/microcode: Remove unnecessary perf callbackBorislav Petkov1-3/+0
c93dc84cbe32 ("perf/x86: Add a microcode revision check for SNB-PEBS") checks whether the microcode revision has fixed PEBS issues. This can happen either: 1. At PEBS init time, where the early microcode has been loaded already 2. During late loading, in the microcode_check() callback. So remove the unnecessary call in the microcode loader init routine. Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-31x86/microcode: Taint and warn on late loadingBorislav Petkov1-0/+5
Warn before it is attempted and taint the kernel. Late loading microcode can lead to malfunction of the kernel when the microcode update changes behaviour. There is no way for the kernel to determine whether its safe or not. Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-31x86/microcode: Default-disable late loadingBorislav Petkov3-1/+19
It is dangerous and it should not be used anyway - there's a nice early loading already. Requested-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-31x86/microcode: Rip out the OLD_INTERFACEBorislav Petkov2-112/+0
Everything should be using the early initrd loading by now. Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-31nvmet: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-05-31nvme: set controller enable bit in a separate writeNiklas Cassel1-1/+9
The NVM Express Base Specification 2.0 specifies in the description of the CC – Controller Configuration register: "Host software shall set the Arbitration Mechanism Selected (CC.AMS), the Memory Page Size (CC.MPS), and the I/O Command Set Selected (CC.CSS) to valid values prior to enabling the controller by setting CC.EN to ‘1’. While we haven't seen any controller misbehaving while setting all bits in a single write, let's do it in the order that it is written in the spec, as there could potentially be controllers that are implemented to rely on the configuration bits being set before enabling the controller. Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-05-31nvme-pci: disable namespace identifiers for the MAXIO MAP1001Christoph Hellwig1-0/+2
The MAXIO MAP1001 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely. Reported-by: Arman Hajishafieha <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Tested-by: Arman Hajishafieha <[email protected]>
2022-05-30net: phy: at803x: disable WOL at probeViorel Suman1-11/+22
Before 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") patch "at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose. The problem here is that the values of these two bits are different after hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will set WAKE_MAGIC flag, even if WOL function is not enabled by calling "at803x_set_wol" function. The patch disables WOL function on probe thus the behavior is consistent. Fixes: 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") Signed-off-by: Viorel Suman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-30net: ipv4: Avoid bounds check warninghuhai1-2/+2
Fix the following build warning when CONFIG_IPV6 is not set: In function ‘fortify_memcpy_chk’, inlined from ‘tcp_md5_do_add’ at net/ipv4/tcp_ipv4.c:1210:2: ./include/linux/fortify-string.h:328:4: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 328 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: huhai <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-30cifs: fix potential double free during failed mountRonnie Sahlberg1-4/+6
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2088799 Cc: [email protected] Signed-off-by: Roberto Bergantinos <[email protected]> Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-05-30RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]Uwe Kleine-König1-0/+7
Without this change arch/riscv/kernel/elf_kexec.c fails to compile once commit 233c1e6c319c ("kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]") is also contained in the tree. This currently happens in next-20220527. Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c. This is safe to do on top of the riscv change even without the change to arch_kexec_apply_relocations. Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file") Looks-good-to: liaochang (A) <[email protected]> Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2022-05-30Merge tag 'for-5.19/fbdev-1' of ↵Linus Torvalds9-41/+22
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and updates from Helge Deller: "A buch of small fixes and cleanups, including: - vesafb: Fix a use-after-free due early fb_info cleanup - clcdfb: Fix refcount leak in clcdfb_of_vram_setup - hyperv_fb: Allow resolutions with size > 64 MB for Gen1 - pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() - omapfb: Prevent compiler warning regarding hwa742_update_window_async()" * tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: omap: Add prototype for hwa742_update_window_async() video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup video: fbdev: radeon: Fix spelling typo in comment video: fbdev: xen: remove setting of 'transp' parameter video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove() video: fbdev: omapfb: simplify the return expression of nec_8048_connect() video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data() video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
2022-05-30Merge tag 'for-5.19/parisc-1' of ↵Linus Torvalds9-100/+86
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: "Minor cleanups and code optimizations, e.g.: - improvements in assembly statements in the tmpalias code path - added some additionals compile time checks - drop some unneccesary assembler DMA syncs" * tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT parisc: Optimize tmpalias function calls parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels parisc: Fix wrong comment for shr macro parisc: Prevent ldil() to sign-extend into upper 32 bits parisc: Don't hardcode assembler bit definitions in tmpalias code parisc: Don't enforce DMA completion order in cache flushes parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
2022-05-30Merge tag 'pm-5.19-rc1-2' of ↵Linus Torvalds39-551/+1648
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update the ARM cpufreq drivers and fix up the CPPC cpufreq driver after recent changes, update the OPP code and PM documentation and add power sequences support to the system reboot and power off code. Specifics: - Add Tegra234 cpufreq support (Sumit Gupta) - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing, Rex-BC Chen, and Jia-Wei Chang) - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin, Pierre Gondois) - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana) - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel) - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski) - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter) - Cleanups (Krzysztof Kozlowski, and Viresh Kumar) - Add Out of Band mode description to the intel-speed-select utility documentation (Srinivas Pandruvada) - Add power sequences support to the system reboot and power off code and make related platform-specific changes for multiple platforms (Dmitry Osipenko, Geert Uytterhoeven)" * tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits) cpufreq: CPPC: Fix unused-function warning cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE Documentation: admin-guide: PM: Add Out of Band mode kernel/reboot: Change registration order of legacy power-off handler m68k: virt: Switch to new sys-off handler API kernel/reboot: Add devm_register_restart_handler() kernel/reboot: Add devm_register_power_off_handler() soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly reboot: Remove pm_power_off_prepare() regulator: pfuze100: Use devm_register_sys_off_handler() ACPI: power: Switch to sys-off handler API memory: emif: Use kernel_can_power_off() mips: Use do_kernel_power_off() ia64: Use do_kernel_power_off() x86: Use do_kernel_power_off() sh: Use do_kernel_power_off() m68k: Switch to new sys-off handler API powerpc: Use do_kernel_power_off() xen/x86: Use do_kernel_power_off() parisc: Use do_kernel_power_off() ...
2022-05-30Merge tag 'thermal-5.19-rc1-2' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull additional thermal control update from Rafael Wysocki: "Add Meteor Lake PCI device ID to the int340x thermal control driver (Sumeet Pawnikar)" * tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Add Meteor Lake PCI device ID
2022-05-30Merge tag 'acpi-5.19-rc1-2' of ↵Linus Torvalds15-160/+51
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These add some new device IDs, update a few drivers (processor, battery, backlight) and clean up code in a few places. Specifics: - Add Meteor Lake ACPI IDs for DPTF devices (Sumeet Pawnikar) - Rearrange find_child_checks() to simplify code (Rafael Wysocki) - Use memremap() to map the UCSI mailbox that is always in main memory and drop acpi_release_memory() that has no more users (Heikki Krogerus, Dan Carpenter) - Make max_cstate/nocst/bm_check_disable processor module parameters visible in sysfs (Yajun Deng) - Fix typo in the CPPC driver (Julia Lawall) - Make the ACPI battery driver show the "not-charging" status by default unless "charging" or "full" is directly indicated (Werner Sembach) - Improve the PM notifier in the ACPI backlight driver (Zhang Rui) - Clean up some white space in the ACPI code (Ian Cowan)" * tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe ACPI: DPTF: Support Meteor Lake ACPI: CPPC: fix typo in comment ACPI: video: improve PM notifer callback ACPI: clean up white space in a few places for consistency ACPI: glue: Rearrange find_child_checks() ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs ACPI: battery: Make "not-charging" the default on no charging or full info ACPI: OSL: Remove the helper for deactivating memory region usb: typec: ucsi: acpi: Map the mailbox with memremap()
2022-05-30Merge tag 'ovl-update-5.19' of ↵Linus Torvalds14-336/+598
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: - Support idmapped layers in overlayfs (Christian Brauner) - Add a fix to exportfs that is relevant to open_by_handle_at(2) as well - Introduce new lookup helpers that allow passing mnt_userns into inode_permission() * tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: support idmapped layers ovl: handle idmappings in ovl_xattr_{g,s}et() ovl: handle idmappings in layer open helpers ovl: handle idmappings in ovl_permission() ovl: use ovl_copy_{real,upper}attr() wrappers ovl: store lower path in ovl_inode ovl: handle idmappings for layer lookup ovl: handle idmappings for layer fileattrs ovl: use ovl_path_getxattr() wrapper ovl: use ovl_lookup_upper() wrapper ovl: use ovl_do_notify_change() wrapper ovl: pass layer mnt to ovl_open_realfile() ovl: pass ofs to setattr operations ovl: handle idmappings in creation operations ovl: add ovl_upper_mnt_userns() wrapper ovl: pass ofs to creation operations ovl: use wrappers to all vfs_*xattr() calls exportfs: support idmapped mounts fs: add two trivial lookup helpers
2022-05-30Merge tag 'mips_5.19' of ↵Linus Torvalds62-335/+401
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: "Cleanups and fixes" * tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits) MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem() MIPS: Kconfig: Fix indentation and add endif comment MIPS: bmips: Fix compiler warning observed on W=1 build MIPS: Rewrite `csum_tcpudp_nofold' in plain C mips: setup: use strscpy to replace strlcpy MIPS: Octeon: add SNIC10E board MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo. MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards. MIPS: Ingenic: Add PWM nodes for X1830. MIPS: Octeon: fix typo in comment MIPS: loongson32: Kconfig: Remove extra space MIPS: Sibyte: remove unnecessary return variable MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation selftests/ftrace: Save kprobe_events to test log MIPS: tools: no need to initialise statics to 0 MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon MIPS: VR41xx: Drop redundant spinlock initialization MIPS: smp: optimization for flush_tlb_mm when exiting ...
2022-05-30Merge tag 'm68knommu-for-v5.19' of ↵Linus Torvalds25-576/+93
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "A collection of changes to add elf-fdpic loader support for m68k. Also a collection of various fixes. They include typo corrections, undefined symbol compilation fixes, removal of the ISA_DMA_API support and removal of unused code. Summary: - correctly set up ZERO_PAGE pointer - drop ISA_DMA_API support - fix comment typos - fixes for undefined symbols - remove unused code and variables - elf-fdpic loader support for m68k" * tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix 68000 CPU link with no platform selected m68k: removed unused "mach_get_ss" m68knommu: fix undefined reference to `mach_get_rtc_pll' m68knommu: fix undefined reference to `_init_sp' m68knommu: allow elf_fdpic loader to be selected m68knommu: add definitions to support elf_fdpic program loader m68knommu: implement minimal regset support m68knommu: use asm-generic/mmu.h for nommu setups m68k: fix typos in comments m68k: coldfire: drop ISA_DMA_API support m68knommu: set ZERO_PAGE() to the allocated zeroed page
2022-05-30Merge branches 'acpi-battery', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki3-41/+18
Merge ACPI battery and backlight driver update and miscellaneous cleanup for 5.19-rc1: - Make the ACPI battery driver show the "not-charging" status by default unless "charging" or "full" is directly indicated (Werner Sembach). - Improve the PM notifier in the ACPI backlight driver (Zhang Rui). - Clean up some white space in the ACPI code (Ian Cowan). * acpi-battery: ACPI: battery: Make "not-charging" the default on no charging or full info * acpi-video: ACPI: video: improve PM notifer callback * acpi-misc: ACPI: clean up white space in a few places for consistency
2022-05-30Merge branches 'acpi-glue', 'acpi-osl', 'acpi-processor' and 'acpi-cppc'Rafael J. Wysocki6-119/+21
Merge general ACPI cleanups and processor support updates for 5.19-rc1: - Rearrange find_child_checks() to simplify code (Rafael Wysocki). - Use memremap() to map the UCSI mailbox that is always in main memory and drop acpi_release_memory() that has no more users (Heikki Krogerus, Dan Carpenter). - Make max_cstate/nocst/bm_check_disable processor module parameters visible in sysfs (Yajun Deng). - Fix typo in the CPPC driver (Julia Lawall). * acpi-glue: ACPI: glue: Rearrange find_child_checks() * acpi-osl: usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe ACPI: OSL: Remove the helper for deactivating memory region usb: typec: ucsi: acpi: Map the mailbox with memremap() * acpi-processor: ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs * acpi-cppc: ACPI: CPPC: fix typo in comment
2022-05-30usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probeDan Carpenter1-2/+2
The devm_memremap() function never returns NULL. It returns error pointers. Fixes: cdc3d2abf438 ("usb: typec: ucsi: acpi: Map the mailbox with memremap()") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-05-30parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNTHelge Deller1-2/+0
Those old syscalls aren't exported via our syscall table, so just drop them. Signed-off-by: Helge Deller <[email protected]>
2022-05-30ASoC: da7219: cancel AAD related work earlier for jack removalAdam Thomson1-4/+4
To avoid the unlikely possibility of register misalignment for headphones being ungrounded/driven after a jack has been removed, move the cancel_work_sync() call to the start of the jack removal handling in the IRQ thread. Signed-off-by: Adam Thomson <[email protected]> Link: https://lore.kernel.org/r/b3f9a679f1e27a9359dcecb496953c4af30acbaa.1653916368.git.DLG-Adam.Thomson.Opensource@dm.renesas.com Signed-off-by: Mark Brown <[email protected]>
2022-05-30ASoC: da7219: Fix pole orientation detection on certain headsetsAdam Thomson1-0/+12
It has been recently found that certain 'active' headsets can be mis-detected as OMTP instead of CTIA, causing obvious issus with audio quality. This relates to increased resistances which negatively impacts the pole detection circuitry within the device. To counter this, ground switches on both headphone channels are available to enable/disable and these allow for the detection process to operate as intended, even with active headsets. This commit adds control of the ground switches to the AAD logic. Signed-off-by: Adam Thomson <[email protected]> Link: https://lore.kernel.org/r/e0a627725c189dd50d6ce24571aed87fe2597395.1653916368.git.DLG-Adam.Thomson.Opensource@dm.renesas.com Signed-off-by: Mark Brown <[email protected]>
2022-05-30ASoC: Intel: avs: Fix build error on arc, m68k and sparcUwe Kleine-König1-1/+2
On some platforms (i.e. arc, m68k and sparc) __fls returns an int (while on most platforms it returns an unsigned long). This triggers a format warning on these few platforms as the driver uses %ld to print a warning. So explicitly cast the return value to unsigned long to make the warning go away (and so fix allmodconfig build on the affected architectures). Fixes: beed983621fb ("ASoC: Intel: avs: Machine board registration") Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-05-30Merge branch 'pm-sysoff'Rafael J. Wysocki28-125/+643
Merge system power off handling rework from Dmitry Osipenko for 5.19-rc1. This introduces a mechanism allowing power sequences to be used for powering off the system and makes related changes in platform-specific code for multiple platforms. * pm-sysoff: (29 commits) kernel/reboot: Change registration order of legacy power-off handler m68k: virt: Switch to new sys-off handler API kernel/reboot: Add devm_register_restart_handler() kernel/reboot: Add devm_register_power_off_handler() soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly reboot: Remove pm_power_off_prepare() regulator: pfuze100: Use devm_register_sys_off_handler() ACPI: power: Switch to sys-off handler API memory: emif: Use kernel_can_power_off() mips: Use do_kernel_power_off() ia64: Use do_kernel_power_off() x86: Use do_kernel_power_off() sh: Use do_kernel_power_off() m68k: Switch to new sys-off handler API powerpc: Use do_kernel_power_off() xen/x86: Use do_kernel_power_off() parisc: Use do_kernel_power_off() arm64: Use do_kernel_power_off() riscv: Use do_kernel_power_off() csky: Use do_kernel_power_off() ...
2022-05-30Merge branch 'pm-docs'Rafael J. Wysocki1-0/+22
Merge PM documentation update for 5.19-rc1. * pm-docs: Documentation: admin-guide: PM: Add Out of Band mode
2022-05-30Merge branch 'pm-opp'Rafael J. Wysocki5-157/+291
Merge OPP (Operating Performance Points) changes for 5.19-rc1: - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana). - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel). - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski). - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter). - Cleanups (Krzysztof Kozlowski, and Viresh Kumar). * pm-opp: opp: Reorder definition of ceil/floor helpers opp: Add apis to retrieve opps with interconnect bandwidth dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM opp: use list iterator only inside the loop opp: replace usage of found with dedicated list iterator variable PM: opp: simplify with dev_err_probe() OPP: call of_node_put() on error path in _bandwidth_supported()
2022-05-30cpufreq: CPPC: Fix unused-function warningPierre Gondois1-9/+8
Building the cppc_cpufreq driver with for arm64 with CONFIG_ENERGY_MODEL=n triggers the following warnings: drivers/cpufreq/cppc_cpufreq.c:550:12: error: ‘cppc_get_cpu_cost’ defined but not used [-Werror=unused-function] 550 | static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz, | ^~~~~~~~~~~~~~~~~ drivers/cpufreq/cppc_cpufreq.c:481:12: error: ‘cppc_get_cpu_power’ defined but not used [-Werror=unused-function] 481 | static int cppc_get_cpu_power(struct device *cpu_dev, | ^~~~~~~~~~~~~~~~~~ Move the Energy Model related functions into specific guards. This allows to fix the warning and prevent doing extra work when the Energy Model is not present. Fixes: 740fcdc2c20e ("cpufreq: CPPC: Register EM based on efficiency class information") Reported-by: Shaokun Zhang <[email protected]> Signed-off-by: Pierre Gondois <[email protected]> Tested-by: Shaokun Zhang <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-05-30cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIEZheng Bin1-1/+2
If CONFIG_ACPI_CPPC_CPUFREQ_FIE is not set, building fails: drivers/cpufreq/cppc_cpufreq.c: In function ‘populate_efficiency_class’: drivers/cpufreq/cppc_cpufreq.c:584:2: error: ‘cppc_cpufreq_driver’ undeclared (first use in this function); did you mean ‘cpufreq_driver’? cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em; ^~~~~~~~~~~~~~~~~~~ cpufreq_driver Make declare of cppc_cpufreq_driver out of CONFIG_ACPI_CPPC_CPUFREQ_FIE to fix this. Fixes: 740fcdc2c20e ("cpufreq: CPPC: Register EM based on efficiency class information") Signed-off-by: Zheng Bin <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-05-30blk-mq: do not update io_ticks with passthrough requestsHaisu Wang1-1/+2
Flush or passthrough requests are not accounted as normal IO in completion. To reflect iostat for slow IO, io_ticks is updated when stat show called based on inflight numbers. It may cause inconsistent io_ticks calculation result. So do not account non-passthrough request when check inflight. Fixes: 86d7331299fd ("block: update io_ticks when io hang") Signed-off-by: Haisu Wang <[email protected]> Reviewed-by: samuelliao <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-05-30Merge tag 'optee-warning-for-v5.19' of ↵Arnd Bergmann1-1/+1
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/late Fix a compiler warning in OP-TEE driver * tag 'optee-warning-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: Pass a pointer to virt_addr_valid() Link: https://lore.kernel.org/r/20220530112612.GA1511426@jade Signed-off-by: Arnd Bergmann <[email protected]>
2022-05-30ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUSMarios Levogiannis1-0/+10
Set microphone pins 0x18 (rear) and 0x19 (front) to VREF_50 to fix the microphone noise on ASUS TUF B550M-PLUS which uses the ALCS1200A codec. The initial value was VREF_80. The same issue is also present on Windows using both the default Windows driver and all tested Realtek drivers before version 6.0.9049.1. Comparing Realtek driver 6.0.9049.1 (the first one without the microphone noise) to Realtek driver 6.0.9047.1 (the last one with the microphone noise) revealed that the fix is the result of setting pins 0x18 and 0x19 to VREF_50. This fix may also work for other boards that have been reported to have the same microphone issue and use the ALC1150 and ALCS1200A codecs, since these codecs are similar and the fix in the Realtek driver on Windows is common for both. However, it is currently enabled only for ASUS TUF B550M-PLUS as this is the only board that could be tested. Signed-off-by: Marios Levogiannis <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-05-30sched/autogroup: Fix sysctl movePeter Zijlstra1-1/+1
Ivan reported /proc/sys/kernel/sched_autogroup_enabled went walk-about and using the noautogroup command line parameter would result in a boot error message. Turns out the sysctl move placed the init function wrong. Fixes: c8eaf6ac76f4 ("sched: move autogroup sysctls into its own file") Reported-by: Ivan Kozik <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Ivan Kozik <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2022-05-30ARM: configs: Enable more audio support for i.MXMark Brown1-0/+2
The generic audio card for Freescale platforms is used by a wide range of i.MX systems and also has selects for the various audio controllers used on them so will help with systems that don't use that specific card too. Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]>
2022-05-30wifi: rtw88: add a work to correct atomic scheduling warning of ::set_timPing-Ke Shih5-3/+15
The set_tim is supposed to be atomic, but we should download beacon context to firmware with a mutex lock. To avoid warning, do the thing in another work. BUG: scheduling while atomic: swapper/1/0/0x00000700 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.18.0-rc7-00703-g33b5ee09a0c1 #4 Hardware name: Pine64 RK3566 Quartz64-A Board (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x14/0x60 dump_stack_lvl+0x60/0x78 dump_stack+0x14/0x2c __schedule_bug+0x5c/0x70 __schedule+0x5c4/0x630 schedule+0x44/0xb0 schedule_preempt_disabled+0xc/0x14 __mutex_lock.constprop.0+0x538/0x56c __mutex_lock_slowpath+0x10/0x20 mutex_lock+0x54/0x60 rtw_ops_set_tim+0x20/0x40 __sta_info_recalc_tim+0x150/0x250 sta_info_recalc_tim+0x10/0x20 invoke_tx_handlers_early+0x4e4/0x5c0 ieee80211_tx+0x78/0x110 ieee80211_xmit+0x94/0xc0 __ieee80211_subif_start_xmit+0x818/0xd20 ieee80211_subif_start_xmit+0x44/0x2d0 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 br_dev_queue_push_xmit+0x94/0x174 br_forward_finish+0x90/0xa0 __br_forward+0xc0/0x13c br_forward+0x108/0x134 br_dev_xmit+0x1cc/0x3a4 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 arp_xmit+0x6c/0x7c arp_send_dst+0x8c/0xc0 arp_solicit+0xd4/0x1e0 neigh_probe+0x58/0xa0 neigh_timer_handler+0x27c/0x380 call_timer_fn.constprop.0+0x20/0x80 __run_timers.part.0+0x230/0x280 run_timer_softirq+0x38/0x70 _stext+0x104/0x278 __irq_exit_rcu+0xa4/0xdc irq_exit_rcu+0xc/0x14 el1_interrupt+0x34/0x50 el1h_64_irq_handler+0x14/0x20 el1h_64_irq+0x64/0x68 arch_cpu_idle+0x14/0x20 do_idle+0x208/0x290 cpu_startup_entry+0x20/0x30 secondary_start_kernel+0x130/0x144 __secondary_switched+0x54/0x58 Fixes: f2217968ffda ("rtw88: Add update beacon flow for AP mode") Reported-by: Ondřej Jirman <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Tested-by: Ondřej Jirman <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-30wifi: iwlwifi: pcie: rename CAUSE macroJohannes Berg1-17/+17
At least mips64 has ist own CAUSE macro, so rename ours to IWL_CAUSE to fix build issues. Reported-by: Jakub Kicinski <[email protected]> Fixes: c1918196427b ("iwlwifi: pcie: simplify MSI-X cause mapping") Signed-off-by: Johannes Berg <[email protected]> Acked-by: Gregory Greenman <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20220523220300.682be2029361.I283200b18da589a975a284073dca8ed001ee107a@changeid
2022-05-30wifi: libertas: use variable-size data in assoc req/resp cmdJohannes Berg2-5/+5
The firmware has a 512 limit here, but we use less, so gcc starts complaining about it: drivers/net/wireless/marvell/libertas/cfg.c:1198:63: warning: array subscript ‘struct cmd_ds_802_11_associate_response[0]’ is partly outside array bounds of ‘unsigned char[203]’ [-Warray-bounds] 1198 | "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode), | ^~ Since we size the command and response buffer per our needs and not per the firmware maximum, change to a variable size data array and put the 512 only into a comment. In the end, that's actually what the code always wanted, and it simplifies the code that used to subtract the fixed size buffer size in two places. Reported-by: Jakub Kicinski <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20220523180200.115fa27fbece.Ie66d874b047e7afad63900aa2df70f031711147e@changeid
2022-05-30Merge tag 'socfpga_dts_updates_for_v5.19' of ↵Arnd Bergmann9-8/+128
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late SoCFPGA dts updates for v5.19 - dtschema fix SPI NOR node - correct dt-bindings doc for Altera gpio driver - add support for n6000 Agilex platform and dt-bindings documentation * tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: intel: add device tree for n6000 dt-bindings: intel: add binding for Intel n6000 dt-bindings: soc: add bindings for Intel HPS Copy Engine dt-bindings: gpio: altera: correct interrupt-cells ARM: dts: socfpga: align SPI NOR node name with dtschema Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-05-30Merge tag 'aspeed-5.19-devicetree' of ↵Arnd Bergmann9-55/+431
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/late ASPEED device tree updates for 5.19 - New machine: * Nuvia's DC-SCM BMC - Enable AST2600 GFX, the BMC-driven graphics device - Add a bunch of devices for the AST2600 EVB - Updates to the AST2600 Bletchley machine - Backwards compatible changes to support the new spi-mem based SPI NOR driver * tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: ast2600-evb: Enable GFX device ARM: dts: aspeed: Add GFX node to AST2600 ARM: dts: aspeed: ast2600-evb: Enable virtual hub ARM: dts: aspeed: ast2600-evb: Enable video engine ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO ARM: dts: aspeed: Add Nuvia DC-SCM BMC ARM: dts: aspeed: bletchley: add sample averaging for ADM1278 ARM: dts: aspeed: bletchley: add eeprom node on each sled ARM: dts: aspeed: bletchley: add pca9536 node on each sled ARM: dts: aspeed: bletchley: update gpio0 line names ARM: dts: aspeed: bletchley: Enable mdio0 bus ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc ARM: dts: aspeed: bletchley: enable ehci0 device node ARM: dts: aspeed: Add USB2.0 device controller node ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes ARM: dts: aspeed: Enable Dual SPI RX transfers ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1 Link: https://lore.kernel.org/r/CACPK8XfUmFxU8Y6C+aZ2+=dT7=fCfs2=2_aYqyRjoXCoeQaUWQ@mail.gmail.com Signed-off-by: Arnd Bergmann <[email protected]>
2022-05-30tee: optee: Pass a pointer to virt_addr_valid()Linus Walleij1-1/+1
A pointer into virtual memory is represented by a (void *) not an u32, so the compiler warns: drivers/tee/optee/call.c:365:29: warning: passing argument 1 of 'virt_to_pfn' makes pointer from integer without a cast [-Wint-conversion] Fix this with an explicit cast. Cc: Sumit Garg <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Sumit Garg <[email protected]> [jw: fixed merge conflict] Signed-off-by: Jens Wiklander <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.