aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-07-26Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
* 'for-linus' of git://git.kernel.dk/linux-block: block: fix warning with calling smp_processor_id() in preemptible section
2011-07-26pci-label.c: size_t misspelled as mode_tAl Viro1-1/+1
no, really, strlen() and snprintf() do not return mode_t values... Signed-off-by: Al Viro <[email protected]>
2011-07-26jffs2: S_ISLNK(mode & S_IFMT) is pointlessAl Viro1-1/+1
it's S_ISLNK(mode), TYVM... Signed-off-by: Al Viro <[email protected]>
2011-07-26snd_msnd ->mode is fmode_t, not mode_tAl Viro1-1/+1
we put FMODE_... in there Signed-off-by: Al Viro <[email protected]>
2011-07-26v9fs_iop_get_acl: get rid of unused variableAl Viro1-1/+0
Signed-off-by: Al Viro <[email protected]>
2011-07-26vfs: dont chain pipe/anon/socket on superblock s_inodes listEric Dumazet5-13/+35
Workloads using pipes and sockets hit inode_sb_list_lock contention. superblock s_inodes list is needed for quota, dirty, pagecache and fsnotify management. pipe/anon/socket fs are clearly not candidates for these. Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Al Viro <[email protected]>
2011-07-26Documentation: Exporting: update description of d_splice_aliasPhillip Lougher1-1/+8
Following commits a904937 and 0c1aa9a update the d_splice_alias desciption. Signed-off-by: Phillip Lougher <[email protected]> Signed-off-by: Al Viro <[email protected]>
2011-07-26fs: add missing unlock in default_llseek()Dan Carpenter1-4/+8
A recent change in linux-next, 982d816581 "fs: add SEEK_HOLE and SEEK_DATA flags" added some direct returns on error, but it should have been a goto out. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Al Viro <[email protected]>
2011-07-26Merge branch 'drm-core-next' of ↵Linus Torvalds116-1440/+5593
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (135 commits) drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1 drm/radeon/kms: add missing vddci setting on NI+ drm/radeon: Add a rmb() in IH processing drm/radeon: ATOM Endian fix for atombios_crtc_program_pll() drm/radeon: Fix the definition of RADEON_BUF_SWAP_32BIT drm/radeon: Do an MMIO read on interrupts when not uisng MSIs drm/radeon: Writeback endian fixes drm/radeon: Remove a bunch of useless _iomem casts drm/gem: add support for private objects DRM: clean up and document parsing of video= parameter DRM: Radeon: Fix section mismatch. drm: really make debug levels match in edid failure code drm/radeon/kms: fix i2c map for rv250/280 drm/nouveau/gr: disable fifo access and idle before suspend ctx unload drm/nouveau: pass flag to engine fini() method on suspend drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashing drm/nv40/gr: rewrite/split context takedown functions drm/nouveau: detect disabled device in irq handler and return IRQ_NONE drm/nouveau: ignore connector type when deciding digital/analog on DVI-I drm/nouveau: Add a quirk for Gigabyte NX86T ...
2011-07-26Merge branch 'fix/asoc' into for-linusTakashi Iwai7-47/+86
2011-07-26ALSA: hda - Cirrus Logic CS421x supportTim Howe1-34/+709
This update includes the changes necessary for supporting the CS421x family of codecs. Previously this file only supported the CS420x family of codecs. This file also contains init verbs to correct several issues in the CS421x hardware. Behavior between the CS421x and CS420x codec families is similar, so several functions have been reused with "if" statements to determine which codec family (CS421x or CS420x) is present. Also, this file will be updated sometime in the near future in order to add support for a system using CS421x that requires mono mix on the speaker output only. [Fix const usages and adaption for new APIs by tiwai] Signed-off-by: Tim Howe <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-07-26ALSA: Make pcm.h self-containedTakashi Iwai2-12/+27
Move the macros depending on snd_mask_min() and co out of pcm.h into pcm_params.h. Otherwise using some params_*() macros will give comiple errors without inclusion of pcm_params.h. Also use hw_param_interval_c() and hw_param_mask_c() for const pointer. Reported-by: Tim Blechmann <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-07-26ALSA: hda - Allow codec-specific set_power_state opsTakashi Iwai3-41/+56
The procedure for codec D-state change may have exceptional cases depending on the codec chip, such as a longer delay or suppressing D3. This patch adds a new codec ops, set_power_state() to override the system default function. For ease of porting, snd_hda_codec_set_power_to_all() helper function is extracted from the default set_power_state() function. As an example, the Conexant codec-specific delay is removed from the default routine but moved to patch_conexant.c. Signed-off-by: Takashi Iwai <[email protected]>
2011-07-26ALSA: hda - Add post_suspend patch opsTakashi Iwai2-10/+9
Add a new ops, post_suspend(), which is called after suspend() ops is performed. This is called only in the case of the real PM suspend, and the codec driver can use this for further changing of D-state or clearing the LED, etc. Signed-off-by: Takashi Iwai <[email protected]>
2011-07-26ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PMTakashi Iwai8-30/+25
It makes little sense to enable power-saving without PM. This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM in all places. Signed-off-by: Takashi Iwai <[email protected]>
2011-07-26block: fix warning with calling smp_processor_id() in preemptible sectionJens Axboe1-1/+1
After commit 5757a6d7 introduced an unsafe calling of smp_processor_id(), with preempt debuggin turned on we spew a lot of: BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/514 caller is __make_request+0x1b8/0x308 [<c0019f44>] (unwind_backtrace+0x0/0xe8) from [<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0) [<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0) from [<c0223d14>] (__make_request+0x1b8/0x308) [<c0223d14>] (__make_request+0x1b8/0x308) from [<c02215ac>] (generic_make_request+0x4dc/0x558) [<c02215ac>] (generic_make_request+0x4dc/0x558) from [<c022173c>] (submit_bio+0x114/0x138) [<c022173c>] (submit_bio+0x114/0x138) from [<c011f504>] (submit_bh+0x148/0x16c) [<c011f504>] (submit_bh+0x148/0x16c) from [<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8) [<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8) from [<c01aff78>] (journal_commit_transaction+0x1198/0x1688) [<c01aff78>] (journal_commit_transaction+0x1198/0x1688) from [<c01b4034>] (kjournald+0xb4/0x224) [<c01b4034>] (kjournald+0xb4/0x224) from [<c0069ea0>] (kthread+0x8c/0x94) [<c0069ea0>] (kthread+0x8c/0x94) from [<c00137f8>] (kernel_thread_exit+0x0/0x8) Fix this by just using raw_smp_processor_id(), it's just a hint after all. There's no pinning of the CPU or accessing per-cpu structures involved. Reported-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2011-07-26drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1Jerome Glisse1-4/+18
DPEncoderService newer than 1.1 can't properly program the DP (display port) link training. When facing such version use the DIGxEncoderControl method instead. Fix DP link training on some R7XX. Signed-off-by: Jerome Glisse <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-07-26drm/radeon/kms: add missing vddci setting on NI+Alex Deucher1-0/+3
Need to add vddci setting to pm init as well as resume. Fixes hangs on load on some boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=38754 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-07-26target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectorsNicholas Bellinger1-4/+3
This patch adds the new macro usage of include/linux/kernel.h:DIV_ROUND_UP_SECTOR_T for the new DIV_ROUND_UP_ULL() usage for 32-bit architectures with unsigned long long sector_t division in transport_allocate_data_tasks() usage for target_core_mod v4.1 Reported-by: Andrew Morton <[email protected]> Signed-off-by: Nicholas A. Bellinger <[email protected]>
2011-07-26Revert "microblaze: PCI fix typo fault in of_node pointer moving into pci_bus"Michal Simek1-1/+1
This reverts commit c9d761b7c4b658a937a941aea2781f511a0ff3ec. Ben' commit "microblaze/pci: Move the remains of pci_32.c to pci-common.c" (sha1: bf13a6fa09b8db7f1fd59b5e2ed3674a89a6a25c) completely removed pci_32.c that's why my fixing commit caused the problem with merging and need to be revert. Signed-off-by: Michal Simek <[email protected]>
2011-07-26GFS2: Fix mount hang caused by certain access pattern to sysfs filesSteven Whitehouse1-2/+2
Depending upon the order of userspace/kernel during the mount process, this can result in a hang without the _all version of the completion. Signed-off-by: Steven Whitehouse <[email protected]>
2011-07-26kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usageNicholas Bellinger1-0/+8
Add new DIV_ROUND_UP_SECTOR_T macro usage for 32-bit architectures requiring a new DIV_ROUND_UP_ULL, and existing 64-bit usage with DIV_ROUND_UP. Reported-by: Linus Torvalds <[email protected]> Reported-by: Andrew Morton <[email protected]> Signed-off-by: Nicholas A. Bellinger <[email protected]>
2011-07-26iscsi-target: Add iSCSI fabric support for target v4.1Nicholas Bellinger41-1/+22099
The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Andy Grover <[email protected]> Acked-by: Roland Dreier <[email protected]> Signed-off-by: Nicholas A. Bellinger <[email protected]>
2011-07-26ALSA: hda - Make sure mute led reflects master mute stateVitaliy Kulikov1-18/+35
This patch adds checking of mute state on all outputs besides just speakers to calculate the master mute state for mute led support. It also renames and splits the function that does it for better code clarity. Signed-off-by: Vitaliy Kulikov <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-07-26ALSA: hda - Fix invalid mute led state on resume of IDT codecsVitaliy Kulikov3-0/+17
Codec state is not restored immediately on resume but on the first access when power-save is enabled. That leads to an invalid mute led state after resume until either sound is played or some control is changed. This patch adds a possibility for a vendor specific patch to restore codec state immediately after resume if required. And it adds code to restore IDT codecs state immediately on resume on HP systems with mute led support. Signed-off-by: Vitaliy Kulikov <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-07-25p9: avoid unused variable warningLinus Torvalds1-1/+0
Commit 4e34e719e457 ("fs: take the ACL checks to common code") removed the use of the 'acl' variable in v9fs_iop_get_acl(), but left the variable definition around. Remove it to get rid of the warning: fs/9p/acl.c: In function ‘v9fs_iop_get_acl’: fs/9p/acl.c:101:20: warning: unused variable ‘acl’ Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25Merge branch 'staging-next' of ↵Linus Torvalds797-187777/+49400
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits) staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register. staging:iio:kfifo_buf fix double initialization of the ring device structure. staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata. staging:iio:imu fix missing register table index for some channels spectra: enable device before poking it staging: rts_pstor: Fix a miswriting staging/lirc_bt829: Return -ENODEV when no hardware is found. staging/lirc_parallel: remove pointless prototypes. staging/lirc_parallel: fix panic on rmmod staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata. Staging: zram: Fix kunmapping order Revert "gma500: Fix dependencies" gma500: Add medfield header gma500: wire up the mrst i2c bus from chip_info gma500: Fix DPU build gma500: Clean up the DPU config and make it runtime gma500: resync with Medfield progress gma500: Use the mrst helpers and power control for mode commit gma500@ Fix backlight range error gma500: More Moorestown muddle meddling means MM maybe might modeset ... Fix up fairly trivial conflicts all over, mostly due to header file cleanup conflicts, but some deleted files and some just context changes: - Documentation/feature-removal-schedule.txt - drivers/staging/bcm/headers.h - drivers/staging/brcm80211/brcmfmac/dhd_linux.c - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h - drivers/staging/brcm80211/brcmfmac/wl_iw.c - drivers/staging/et131x/et131x_netdev.c - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c - drivers/staging/rtl8192e/r8192E.h - drivers/staging/usbip/userspace/src/utils.h
2011-07-25Merge branch 'tty-next' of ↵Linus Torvalds20-187/+903
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits) amba pl011: workaround for uart registers lockup n_gsm: fix the wrong FCS handling pch_uart: add missing comment about OKI ML7223 pch_uart: Add MSI support tty: fix "IRQ45: nobody cared" PTI feature to allow user to name and mark masterchannel request. 0 for o PTI Makefile bug. tty: serial: samsung.c remove legacy PM code. SERIAL: SC26xx: Fix link error. serial: mrst_max3110: initialize waitqueue earlier mrst_max3110: Change max missing message priority. tty: s5pv210: Add delay loop on fifo reset function for UART tty/serial: Fix XSCALE serial ports, e.g. ce4100 serial: bfin_5xx: fix off-by-one with resource size drivers/tty: use printk_ratelimited() instead of printk_ratelimit() tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs tty: n_gsm: Add raw-ip support tty: n_gsm: expose gsmtty device nodes at ldisc open time pch_phub: Fix register miss-setting issue serial: 8250, increase PASS_LIMIT ...
2011-07-25Merge branch 'usb-next' of ↵Linus Torvalds135-3167/+9085
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits) EHCI: fix direction handling for interrupt data toggles USB: serial: add IDs for WinChipHead USB->RS232 adapter USB: OHCI: fix another regression for NVIDIA controllers usb: gadget: m66592-udc: add pullup function usb: gadget: m66592-udc: add function for external controller usb: gadget: r8a66597-udc: add pullup function usb: renesas_usbhs: support multi driver usb: renesas_usbhs: inaccessible pipe is not an error usb: renesas_usbhs: care buff alignment when dma handler USB: PL2303: correctly handle baudrates above 115200 usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift usb: renesas_usbhs: compile/config are rescued usb: renesas_usbhs: fixup comment-out usb: update email address in ohci-sh and r8a66597-hcd usb: r8a66597-hcd: add function for external controller EHCI: only power off port if over-current is active USB: mon: Allow to use usbmon without debugfs USB: EHCI: go back to using the system clock for QH unlinks ehci: add pci quirk for Ordissimo and RM Slate 100 too ehci: refactor pci quirk to use standard dmi_check_system method ... Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
2011-07-25Merge branch 'driver-core-next' of ↵Linus Torvalds9-210/+448
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: updated Documentation/ja_JP/SubmittingPatches debugfs: add documentation for debugfs_create_x64 uio: uio_pdrv_genirq: Add OF support firmware: gsmi: remove sysfs entries when unload the module Documentation/zh_CN: Fix messy code file email-clients.txt driver core: add more help description for "path to uevent helper" driver-core: modify FIRMWARE_IN_KERNEL help message driver-core: Kconfig grammar corrections in firmware configuration DOCUMENTATION: Replace create_device() with device_create(). DOCUMENTATION: Update overview.txt in Doc/driver-model. pti: pti_tty_install documentation mispelling.
2011-07-25Merge branch 'next' of ↵Linus Torvalds152-1441/+10498
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits) drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c powerpc/85xx: fix mpic configuration in CAMP mode powerpc: Copy back TIF flags on return from softirq stack powerpc/64: Make server perfmon only built on ppc64 server devices powerpc/pseries: Fix hvc_vio.c build due to recent changes powerpc: Exporting boot_cpuid_phys powerpc: Add CFAR to oops output hvc_console: Add kdb support powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon powerpc/irq: Quieten irq mapping printks powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs powerpc: Add mpt2sas driver to pseries and ppc64 defconfig powerpc: Disable IRQs off tracer in ppc64 defconfig powerpc: Sync pseries and ppc64 defconfigs powerpc/pseries/hvconsole: Fix dropped console output hvc_console: Improve tty/console put_chars handling powerpc/kdump: Fix timeout in crash_kexec_wait_realmode powerpc/mm: Fix output of total_ram. powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards powerpc: Correct annotations of pmu registration functions ... Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and drivers/cpufreq
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds44-1907/+1074
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Revive reporting of spurious interrupts m68knommu: Move forward declaration of do_IRQ() from machdep.h to irq.h m68k: fix some atomic operation asm address modes for ColdFire m68k: use CPU_HAS_NO_BITFIELDS for signal functions m68k: merge and clean up delay.h files m68knommu: correctly use trap_init m68knommu: merge ColdFire 5206 and 5206e platform code m68k: merge mmu and non-mmu bitops.h m68k: merge MMU and non MMU versions of system.h m68k: merge MMU and non-MMU versions of asm/hardirq.h m68k: merge the non-mmu and mmu versions of module.c m68knommu: Fix printk() format in free_initrd_mem() m68knommu: Make empty_zero_page "void *", like on m68k
2011-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds6-6/+28
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: Make ZLIB compression support optional Squashfs: Update documentation for XZ and add squashfs-tools devel tree
2011-07-25Merge branch 'for-3.1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds33-1426/+559
* 'for-3.1' of git://linux-nfs.org/~bfields/linux: nfsd: don't break lease on CLAIM_DELEGATE_CUR locks: rename lock-manager ops nfsd4: update nfsv4.1 implementation notes nfsd: turn on reply cache for NFSv4 nfsd4: call nfsd4_release_compoundargs from pc_release nfsd41: Deny new lock before RECLAIM_COMPLETE done fs: locks: remove init_once nfsd41: check the size of request nfsd41: error out when client sets maxreq_sz or maxresp_sz too small nfsd4: fix file leak on open_downgrade nfsd4: remember to put RW access on stateid destruction NFSD: Added TEST_STATEID operation NFSD: added FREE_STATEID operation svcrpc: fix list-corrupting race on nfsd shutdown rpc: allow autoloading of gss mechanisms svcauth_unix.c: quiet sparse noise svcsock.c: include sunrpc.h to quiet sparse noise nfsd: Remove deprecated nfsctl system call and related code. NFSD: allow OP_DESTROY_CLIENTID to be only op in COMPOUND Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
2011-07-26MIPS: Close races in TLB modify handlers.David Daney1-98/+194
Page table entries are made invalid by writing a zero into the the PTE slot in a page table. This creates a race condition with the TLB modify handlers when they are updating the PTE. CPU0 CPU1 Test for _PAGE_PRESENT . set to not _PAGE_PRESENT (zero) Set to _PAGE_VALID So now the page not present value (zero) is suddenly valid and user space programs have access to physical page zero. We close the race by putting the test for _PAGE_PRESENT and setting of _PAGE_VALID into an atomic LL/SC section. This requires more registers than just K0 and K1 in the handlers, so we need to save some registers to a save area and then restore them when we are done. The save area is an array of cacheline aligned structures that should not suffer cache line bouncing as they are CPU private. [[email protected]: Fix !defined(CONFIG_MIPS_PGD_C0_CONTEXT) build error.] Signed-off-by: David Daney <[email protected]> To: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2577/ Signed-off-by: Ralf Baechle <[email protected]>
2011-07-26MIPS: Add uasm UASM_i_SRL_SAFE macro.David Daney1-0/+2
This can be used from either 32-bit or 64-bit code to generate logical right shifts of any constant amount. Signed-off-by: David Daney <[email protected]> To: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/2576/ Signed-off-by: Ralf Baechle <[email protected]>
2011-07-25vfs: fix check_acl compile error when CONFIG_FS_POSIX_ACL is not setLinus Torvalds1-0/+2
Commit e77819e57f08 ("vfs: move ACL cache lookup into generic code") didn't take the FS_POSIX_ACL config variable into account - when that is not set, ACL's go away, and the cache helper functions do not exist, causing compile errors like fs/namei.c: In function 'check_acl': fs/namei.c:191:10: error: implicit declaration of function 'negative_cached_acl' fs/namei.c:196:2: error: implicit declaration of function 'get_cached_acl' fs/namei.c:196:6: warning: assignment makes pointer from integer without a cast fs/namei.c:212:11: error: implicit declaration of function 'set_cached_acl' Reported-by: Markus Trippelsdorf <[email protected]> Acked-by: Stephen Rothwell <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25Merge 'akpm' patch seriesLinus Torvalds160-1090/+5261
* Merge akpm patch series: (122 commits) drivers/connector/cn_proc.c: remove unused local Documentation/SubmitChecklist: add RCU debug config options reiserfs: use hweight_long() reiserfs: use proper little-endian bitops pnpacpi: register disabled resources drivers/rtc/rtc-tegra.c: properly initialize spinlock drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time() drivers/rtc: add support for Qualcomm PMIC8xxx RTC drivers/rtc/rtc-s3c.c: support clock gating drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200 init: skip calibration delay if previously done misc/eeprom: add eeprom access driver for digsy_mtc board misc/eeprom: add driver for microwire 93xx46 EEPROMs checkpatch.pl: update $logFunctions checkpatch: make utf-8 test --strict checkpatch.pl: add ability to ignore various messages checkpatch: add a "prefer __aligned" check checkpatch: validate signature styles and To: and Cc: lines checkpatch: add __rcu as a sparse modifier checkpatch: suggest using min_t or max_t ... Did this as a merge because of (trivial) conflicts in - Documentation/feature-removal-schedule.txt - arch/xtensa/include/asm/uaccess.h that were just easier to fix up in the merge than in the patch series.
2011-07-25drivers/connector/cn_proc.c: remove unused localAndrew Morton1-1/+0
Fix the warning drivers/connector/cn_proc.c: In function 'proc_ptrace_connector': drivers/connector/cn_proc.c:176: warning: unused variable 'tracer' Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25Documentation/SubmitChecklist: add RCU debug config optionsPaul E. McKenney1-2/+2
There have been persistent lockdep RCU splats, indicating that submitters are not testing with CONFIG_PROVE_RCU. Add this config option to the list in Documentation/SubmitChecklist. Also add CONFIG_DEBUG_OBJECTS_RCU_HEAD for good measure. Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25reiserfs: use hweight_long()Akinobu Mita1-5/+1
Use hweight_long() to count free bits in the bitmap. Signed-off-by: Akinobu Mita <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25reiserfs: use proper little-endian bitopsAkinobu Mita3-4/+6
Using __test_and_{set,clear}_bit_le() with ignoring its return value can be replaced with __{set,clear}_bit_le(). This introduces reiserfs_{set,clear}_le_bit for __{set,clear}_bit_le and does the above change with them. Signed-off-by: Akinobu Mita <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25pnpacpi: register disabled resourcesWitold Szczeponik1-25/+27
When parsing PnP ACPI resource structures, it may happen that some of the resources are disabled (in which case "the size" of the resource equals zero). The current solution is to skip these resources completely - with the unfortunate side effect that they are not registered despite the fact that they exist, after all. (The downside of this approach is that these resources cannot be used as templates for setting the actual device's resources because they are missing from the template.) The kernel's APM implementation does not suffer from this problem and registers all resources regardless of "their size". This patch fixes a problem with (at least) the vintage IBM ThinkPad 600E (and most likely also with the 600, 600X, and 770X which have a very similar layout) where some of its PnP devices support options where either an IRQ, a DMA, or an IO port is disabled. Without this patch, the devices can not be configured using the "/sys/bus/pnp/devices/*/resources" interface. The manipulation of these resources is important because the 600E has very demanding requirements. For instance, the number of IRQs is not sufficient to support all devices of the 600E. Fortunately, some of the devices, like the sound card's MPU-401 UART, can be configured to not use any IRQ, hence freeing an IRQ for a device that requires one. (Still, the device's "ResourceTemplate" requires an IRQ resource descriptor which cannot be created if the resource has not been registered in the first place.) As an example, the dependent sets of the 600E's CSC0103 device (the MPU-401 UART) are listed, with the patch applied, as: Dependent: 00 - Priority preferred port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding irq <none> High-Edge Dependent: 01 - Priority acceptable port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding irq 5,7,2/9,10,11,15 High-Edge (The same result is obtained when PNPBIOS is used instead of PnP ACPI.) Without the patch, the IRQ resource in the preferred option is not listed at all: Dependent: 00 - Priority preferred port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding Dependent: 01 - Priority acceptable port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding irq 5,7,2/9,10,11,15 High-Edge And in fact, the 600E's DSDT lists the disabled IRQ as an option, as can be seen from the following excerpt from the DSDT: Name (_PRS, ResourceTemplate () { StartDependentFn (0x00, 0x00) { IO (Decode16, 0x0300, 0x0330, 0x10, 0x04) IRQNoFlags () {} } StartDependentFn (0x01, 0x00) { IO (Decode16, 0x0300, 0x0330, 0x10, 0x04) IRQNoFlags () {5,7,9,10,11,15} } EndDependentFn () }) With this patch applied, a user space program - or maybe even the kernel - can allocate all devices' resources optimally. For the 600E, this means to find optimal resources for (at least) the serial port, the parallel port, the infrared port, the MWAVE modem, the sound card, and the MPU-401 UART. The patch applies the idea to register disabled resources to all types of resources, not just to IRQs, DMAs, and IO ports. At the same time, it mimics the behavior of the "pnp_assign_xxx" functions from "drivers/pnp/manager.c" where resources with "no size" are considered disabled. No regressions were observed on hardware that does not require this patch. The patch is applied against 2.6.39. NB: The kernel's current PnP interface does not allow for disabling individual resources using the "/sys/bus/pnp/devices/$device/resources" file. Assuming this could be done, a device could be configured to use a disabled resource using a simple series of calls: echo disable > /sys/bus/pnp/devices/$device/resources echo clear > /sys/bus/pnp/devices/$device/resources echo set irq disabled > /sys/bus/pnp/devices/$device/resources echo fill > /sys/bus/pnp/devices/$device/resources echo activate > /sys/bus/pnp/devices/$device/resources This patch addresses only the parsing of PnP ACPI devices. ChangeLog (v1 -> v2): - extend patch description - fix typo in patch itself Signed-off-by: Witold Szczeponik <[email protected]> Cc: Len Brown <[email protected]> Cc: Adam Belay <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Henrique de Moraes Holschuh <[email protected]> Cc: Matthew Garrett <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25drivers/rtc/rtc-tegra.c: properly initialize spinlockUwe Kleine-König1-1/+1
Using __SPIN_LOCK_UNLOCKED for a dynamically allocated lock is wrong and breaks the build with PREEMPT_RT_FULL. Signed-off-by: Uwe Kleine-König <[email protected]> Cc: Andrew Chew <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in ↵Jesper Juhl1-1/+1
twl_rtc_set_time() We forget to save the return value of the call to twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); in 'ret', making the test of 'ret < 0' dead code since 'ret' then couldn't possibly have changed since the last test just a few lines above. It also makes us not detect failures from that specific twl_rtc_write_u8() call. Signed-off-by: Jesper Juhl <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Alexandre Rusev <[email protected]> Cc: "George G. Davis" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25drivers/rtc: add support for Qualcomm PMIC8xxx RTCAnirudh Ghayal4-0/+586
Add support for PMIC8xxx based RTC. PMIC8xxx is Qualcomm's power management IC that internally houses an RTC module. This driver communicates with the PMIC module over SSBI bus. [[email protected]: cosmetic tweaks] Acked-by: Wan ZongShun <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Anirudh Ghayal <[email protected]> Signed-off-by: Ashay Jaiswal <[email protected]> Cc: Samuel Ortiz <[email protected]> Cc: Wan ZongShun <[email protected]> Cc: Alessandro Zummo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25drivers/rtc/rtc-s3c.c: support clock gatingDonggeun Kim1-1/+26
Add support for clock gating. Power consumption can be reduced by setting rtc_clk disabled state except for when RTC related registers are accessed. Signed-off-by: Donggeun Kim <[email protected]> Signed-off-by: MyungJoo Ham <[email protected]> Signed-off-by: KyungMin Park <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Ben Dooks <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200Dmitry Eremin-Solenikov2-10/+75
MPC5200B contains a limited version of RTC from MPC5121. Add support for the RTC on that CPU. Signed-off-by: Dmitry Eremin-Solenikov <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Anatolij Gustschin <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25init: skip calibration delay if previously doneSameer Nanda1-1/+10
For each CPU, do the calibration delay only once. For subsequent calls, use the cached per-CPU value of loops_per_jiffy. This saves about 200ms of resume time on dual core Intel Atom N5xx based systems. This helps bring down the kernel resume time on such systems from about 500ms to about 300ms. [[email protected]: make cpu_loops_per_jiffy static] [[email protected]: clean up message text] [[email protected]: fix things up after upstream rmk changes] Signed-off-by: Sameer Nanda <[email protected]> Cc: Phil Carmody <[email protected]> Cc: Andrew Worsley <[email protected]> Cc: David Daney <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-07-25misc/eeprom: add eeprom access driver for digsy_mtc boardAnatolij Gustschin3-0/+98
Both displays on digsy_mtc board obtain their configuration from microwire EEPROMs which are connected to the SoC over GPIO lines. We need an easy way to access the EEPROMs to write the needed display configuration or to read out the currently programmed configuration. The generic eeprom_93xx46 SPI driver added by previous patch allows EEPROM access over sysfs. Using the simple driver added by this patch we provide used GPIO interface and access control description on the board for generic eeprom_93xx46 driver and spi_gpio driver. Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.