| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
fsck.c always runs top of the stack so we're not too concerned here;
noinline_for_stack is sufficient
Signed-off-by: Kent Overstreet <[email protected]>
|
|
for forwards compat we now explicitly allow mounting and using
filesystems with unknown btrees, and we have to walk them for fsck.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
error handling here is slightly odd, which is why we were accidently
calling evict() on an error pointer
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Split the workqueues for btree read completions and btree write
submissions; we don't want concurrency control on btree read
completions, but we do want concurrency control on write submissions,
else blocking in submit_bio() will cause a ton of kworkers to be
allocated.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548a2 ("Bluetooth: HCI: Remove HCI_AMP support")
It was always called with amp_id == 0, i.e. AMP_ID_BREDR == 0x00 (ie.
non-AMP controller). In the above commit, the code path for amp_id != 0
was preserved, although it should have used the amp_id == 0 one.
Restore the previous behavior of the non-AMP code path, to fix problems
with L2CAP connections.
Fixes: 84a4bb6548a2 ("Bluetooth: HCI: Remove HCI_AMP support")
Signed-off-by: Pauli Virtanen <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.
In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:
TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout
Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
When setting up an advertisement the code shall always attempt to use
the handle set by the instance since it may not be equal to the instance
ID.
Fixes: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Tariq Toukan says:
====================
geneve fixes
This small patchset by Gal provides bug fixes to the geneve tunnels flows.
Patch 1 fixes an incorrect value returned by the inner network header
offset helper.
Patch 2 fixes an issue inside the mlx5e tunneling flow. It 'happened' to
be harmless so far, before applying patch 1.
Series generated against:
commit d30d0e49da71 ("Merge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Move the vxlan_features_check() call to after we verified the packet is
a tunneled VXLAN packet.
Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might
wrongly not get offloaded.
In some cases, it worked by chance as GENEVE header is the same size as
VXLAN, but it is obviously incorrect.
Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support")
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Dragos Tatulea <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support")
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
tcp_v6_syn_recv_sock() calls ip6_dst_store() before
inet_sk(newsk)->pinet6 has been set up.
This means ip6_dst_store() writes over the parent (listener)
np->dst_cookie.
This is racy because multiple threads could share the same
parent and their final np->dst_cookie could be wrong.
Move ip6_dst_store() call after inet_sk(newsk)->pinet6
has been changed and after the copy of parent ipv6_pinfo.
Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
The frame pointer unwinder relies on a standard layout of the stack
frame, consisting of (in downward order)
Calling frame:
PC <---------+
LR |
SP |
FP |
.. locals .. |
Callee frame: |
PC |
LR |
SP |
FP ----------+
where after storing its previous value on the stack, FP is made to point
at the location of PC in the callee stack frame, using the canonical
prologue:
mov ip, sp
stmdb sp!, {fp, ip, lr, pc}
sub fp, ip, #4
The ftrace code assumes that this activation record is pushed first, and
that any stack space for locals is allocated below this. Strict
adherence to this would imply that the caller's value of SP at the time
of the function call can always be obtained by adding 4 to FP (which
points to PC in the callee frame).
However, recent versions of GCC appear to deviate from this rule, and so
the only reliable way to obtain the caller's value of SP is to read it
from the activation record. Since this involves a read from memory
rather than simple arithmetic, we need to use the uaccess API here which
protects against inadvertent data aborts resulting from attempts to
dereference bogus FP values.
The plain uaccess API is ftrace instrumented itself, so to avoid
unbounded recursion, use the __get_kernel_nofault() primitive directly.
Closes: https://lore.kernel.org/all/alp44tukzo6mvcwl4ke4ehhmojrqnv6xfcdeuliybxfjfvgd3e@gpjvwj33cc76
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Uwe Kleine-König <[email protected]>
Reported-by: Justin Chen <[email protected]>
Tested-by: Thorsten Scherer <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
The default ndo_get_iflink() implementation returns the current ifindex
of the netdev. But the overridden nsim_get_iflink() returns 0 if the
current nsim is not linked, breaking backwards compatibility for
userspace that depend on this behaviour.
Fix the problem by returning the current ifindex if not linked to a
peer.
Fixes: 8debcf5832c3 ("netdevsim: add ndo_get_iflink() implementation")
Reported-by: Yu Watanabe <[email protected]>
Suggested-by: Yu Watanabe <[email protected]>
Signed-off-by: David Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update copies of kernel headers, which resulted in support for the
new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
'map_shadow_stack' syscall for x86-32.
- Revert perf.data record memory allocation optimization that ended up
causing a regression, work is being done to re-introduce it in the
next merge window.
- Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
interrupting the build.
* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
tools headers UAPI: Update i915_drm.h with the kernel sources
tools headers UAPI: Sync kvm headers with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync linux/stat.h with the kernel sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Convert PCI core error codes to proper error numbers since latter get
propagated all the way up to the module loading functions
* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Convert PCIBIOS_* return codes to errnos
EDAC/amd64: Convert PCIBIOS_* return codes to errnos
|
|
Commit 070246e4674b ("net: stmmac: Fix for mismatched host/device DMA
address width") added support in the stmmac driver for platform drivers
to indicate the host DMA width, but left it up to authors of the
specific platforms to indicate if their width differed from the addr64
register read from the MAC itself.
Qualcomm's EMAC4 integration supports only up to 36 bit width (as
opposed to the addr64 register indicating 40 bit width). Let's indicate
that in the platform driver to avoid a scenario where the driver will
allocate descriptors of size that is supported by the CPU which in our
case is 36 bit, but as the addr64 register is still capable of 40 bits
the device will use two descriptors as one address.
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Sagar Cheluvegowda <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the SiFive PRCI clocks so that the device boots again.
This driver was registering clkdev lookups that were always going to
be useless. This wasn't a problem until clkdev started returning an
error in these cases, causing this driver to fail probe, and thus boot
to fail because clks are essential for most drivers. The fix is
simple, don't use clkdev because this is a DT based system where
clkdev isn't used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sifive: Do not register clkdevs for PRCI clocks
|
|
Pull smb client fixes from Steve French:
"Two small smb3 client fixes:
- fix deadlock in umount
- minor cleanup due to netfs change"
* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Don't advance the I/O iterator before terminating subrequest
smb: client: fix deadlock in smb2_find_smb_tcon()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fixes for the new ipu6 driver (and related fixes to mei csi driver)
- fix a double debugfs remove logic at mgb4 driver
- a documentation fix
* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel/ipu6: add csi2 port sanity check in notifier bound
media: intel/ipu6: update the maximum supported csi2 port number to 6
media: mei: csi: Warn less verbosely of a missing device fwnode
media: mei: csi: Put the IPU device reference
media: intel/ipu6: fix the buffer flags caused by wrong parentheses
media: intel/ipu6: Fix an error handling path in isys_probe()
media: intel/ipu6: Move isys_remove() close to isys_probe()
media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
media: Documentation: v4l: Fix ACTIVE route flag
media: mgb4: Fix double debugfs remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix possible memory leak the riscv-intc irqchip driver load failures
- Fix boot crash in the sifive-plic irqchip driver caused by recently
changed boot initialization order
- Fix race condition in the gic-v3-its irqchip driver
* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous fixes:
- Fix kexec() crash if call depth tracking is enabled
- Fix SMN reads on inaccessible registers on certain AMD systems"
* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Check for invalid SMN reads
x86/kexec: Fix bug with call depth tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking doc fix from Ingo Molnar:
"Fix typos in the kerneldoc of some of the atomic APIs"
* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes, 6 of which are cc:stable.
All except the nilfs2 fix affect MM and all are singletons - see the
chagelogs for details"
* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
mm: fix xyz_noprof functions calling profiled functions
codetag: avoid race at alloc_slab_obj_exts
mm/hugetlb: do not call vma_add_reservation upon ENOMEM
mm/ksm: fix ksm_zero_pages accounting
mm/ksm: fix ksm_pages_scanned accounting
kmsan: do not wipe out origin when doing partial unpoisoning
vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
mm: page_alloc: fix highatomic typing in multi-block buddies
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
memcg: remove the lockdep assert from __mod_objcg_mlstate()
mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
mm: drop the 'anon_' prefix for swap-out mTHP counters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- interrupt handling and Kconfig fixes for gpio-tqmx86
- add a buffer for storing output values in gpio-tqmx86 as reading back
the registers always returns the input values
- add missing MODULE_DESCRIPTION()s to several GPIO drivers
* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: add missing MODULE_DESCRIPTION() macros
gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
gpio: tqmx86: store IRQ trigger type and unmask status separately
gpio: tqmx86: introduce shadow register for GPIO output value
gpio: tqmx86: fix typo in Kconfig label
|
|
Pull block fixes from Jens Axboe:
- Fix for null_blk block size validation (Andreas)
- NVMe pull request via Keith:
- Use reserved tags for special fabrics operations (Chunguang)
- Persistent Reservation status masking fix (Weiwen)
* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
null_blk: fix validation of block size
nvme: fix nvme_pr_* status code parsing
nvme-fabrics: use reserved tag for reg read/write command
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a locking order issue with setting max async thread workers
(Hagar)
- Fix for a NULL pointer dereference for failed async flagged requests
using ring provided buffers. This doesn't affect the current kernel,
but it does affect older kernels, and is being queued up for 6.10
just to make the stable process easier (me)
- Fix for NAPI timeout calculations for how long to busy poll, and
subsequently how much to sleep post that if a wait timeout is passed
in (me)
- Fix for a regression in this release cycle, where we could end up
using a partially unitialized match value for io-wq (Su)
* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
io_uring: fix possible deadlock in io_register_iowq_max_workers()
io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
io_uring/napi: fix timeout calculation
io_uring: check for non-NULL file pointer in io_file_can_poll()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix handling of folio private changes.
The private value holds pointer to our extent buffer structure
representing a metadata range. Release and create of the range was
not properly synchronized when updating the private bit which ended
up in double folio_put, leading to all sorts of breakage
- fix a crash, reported as duplicate key in metadata, but caused by a
race of fsync and size extending write. Requires prealloc target
range + fsync and other conditions (log tree state, timing)
- fix leak of qgroup extent records after transaction abort
* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: protect folio::private when attaching extent buffer folios
btrfs: fix leak of qgroup extent records after transaction abort
btrfs: fix crash on racing fsync and size-extending write into prealloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an occasional memory overwrite caused by a fix added in 6.10
* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix loop termination condition in gss_free_in_token_pages()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Another fix to avoid allocating pages that overlap with ERR_PTR,
which manifests on rv32
- A revert for the badaccess patch I incorrectly picked up an early
version of
* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: mm: accelerate pagefault when badaccess"
riscv: fix overlap of allocated page and PTR_ERR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Do not create PT_LOAD program header for the kenel image when the
virtual memory informaton in OS_INFO data is not available. That
fixes stand-alone dump failures against kernels that do not provide
the virtual memory informaton
- Add KVM s390 shared zeropage selftest
* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390x: selftests: Add shared zeropage test
s390/crash: Do not use VM info if os_info does not have it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix spurious CPU hotplug warning message from SETEND emulation code
- Fix the build when GCC wasn't inlining our I/O accessor internals
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/io: add constant-argument check
arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Default silead touchscreen driver to 10 fingers and drop 10 finger
setting from all DMI quirks. More of a cleanup then a pure fix, but
since the DMI quirks always get updated through the fixes branch
this avoids conflicts.
- Kconfig fix for randconfig builds
- dell-smbios: Fix wrong token data in sysfs
- amd-hsmp: Fix driver poking unsupported hw when loaded manually
* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
platform/x86: dell-smbios: Simplify error handling
platform/x86: dell-smbios: Fix wrong token data in sysfs
platform/x86: yt2-1380: add CONFIG_EXTCON dependency
platform/x86: touchscreen_dmi: Use 2-argument strscpy()
platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
Input: silead - Always support 10 fingers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Core:
- Make iommu-dma code recognize 'force_aperture' again
- Fix for potential NULL-ptr dereference from iommu_sva_bind_device()
return value
AMD IOMMU fixes:
- Fix lockdep splat for invalid wait context
- Add feature bit check before enabling PPR
- Make workqueue name fit into buffer
- Fix memory leak in sysfs code"
* tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix Invalid wait context issue
iommu/amd: Check EFR[EPHSup] bit before enabling PPR
iommu/amd: Fix workqueue name
iommu: Return right value in iommu_sva_bind_device()
iommu/dma: Fix domain init
iommu/amd: Fix sysfs leak in iommu init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix a regression for the PATA MacIO driver were it would fail to
probe because of the recent changes of initializing the limits in
SCSI core
* tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes: vmwgfx leads the way this week, with minor changes in xe
and amdgpu and a couple of other small fixes.
Seems quiet enough.
xe:
- Update the LMTT when freeing VF GT config
amdgpu:
- Fix shutdown issues on some SMU 13.x platforms
- Silence some UBSAN flexible array warnings
panel:
- sitronix-st7789v: handle of_drm_get_panel_orientation failing
error
vmwgfx:
- filter modes greater than available graphics memory
- fix 3D vs STDU enable
- remove STDU logic from mode valid
- logging fix
- memcmp pointers fix
- remove unused struct
- screen target lifetime fix
komeda:
- unused struct removal"
* tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/vmwgfx: Don't memcmp equivalent pointers
drm/vmwgfx: remove unused struct 'vmw_stdu_dma'
drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive
drm/vmwgfx: Standardize use of kibibytes when logging
drm/vmwgfx: Remove STDU logic from generic mode_valid function
drm/vmwgfx: 3D disabled should not effect STDU memory limits
drm/vmwgfx: Filter modes which exceed graphics memory
drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds
drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms
drm/xe/pf: Update the LMTT when freeing VF GT config
drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation
drm/komeda: remove unused struct 'gamma_curve_segment'
|
|
A Rembrandt-based HP thin client is reported to have problems where
the NVME disk isn't present after resume from s2idle.
This is because the NVME disk wasn't put into D3 at suspend, and
that happened because the StorageD3Enable _DSD was missing in the BIOS.
As AMD's architecture requires that the NVME is in D3 for s2idle, adjust
the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT
advertises low power idle support.
This will ensure that any future products with this BIOS deficiency don't
need to be added to the allow list of overrides.
Cc: All applicable <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected.
The touchscreen reports a battery status of 0% and jumps to 1% when a
stylus is used.
The device ID was added and the battery ignore quirk was enabled for it.
[[email protected]: reformatted changelog a bit]
Signed-off-by: Louis Dalibard <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value,
but then it is unconditionally passed to skb_add_rx_frag() which looks
strange and could lead to null pointer dereference.
lio_vf_rep_copy_packet() call trace looks like:
octeon_droq_process_packets
octeon_droq_fast_process_packets
octeon_droq_dispatch_pkt
octeon_create_recv_info
...search in the dispatch_list...
->disp_fn(rdisp->rinfo, ...)
lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...)
In this path there is no code which sets pg_info->page to NULL.
So this check looks unneeded and doesn't solve potential problem.
But I guess the author had reason to add a check and I have no such card
and can't do real test.
In addition, the code in the function liquidio_push_packet() in
liquidio/lio_core.c does exactly the same.
Based on this, I consider the most acceptable compromise solution to
adjust this issue by moving skb_add_rx_frag() into conditional scope.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1f233f327913 ("liquidio: switchdev support for LiquidIO NIC")
Signed-off-by: Aleksandr Mishin <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It is reported that commit 950210887670 ("thermal: core: Drop
trips_disabled bitmask") causes the maximum frequency of CPUs to drop
further down with every system sleep-wake cycle on Intel Core i7-4710HQ.
This turns out to be due to a trip point whose temperature is equal to 0
degrees Celsius which is acted on every time the system wakes from sleep.
Before commit 950210887670 this trip point would be disabled wia the
trips_disabled bitmask, but now it is treated as a valid one.
Since ACPI thermal control is generally about protection against
overheating, trip points with temperature of 0 centigrade or below are
not particularly useful there, so initialize them all as invalid which
fixes the problem at hand.
Fixes: 950210887670 ("thermal: core: Drop trips_disabled bitmask")
Closes: https://lore.kernel.org/linux-pm/[email protected]
Reported-by: Tibor Billes <[email protected]>
Tested-by: Tibor Billes <[email protected]>
Cc: 6.7+ <[email protected]> # 6.7+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
It is reported that commit 31a0fa0019b0 ("thermal/debugfs: Pass cooling
device state to thermal_debug_cdev_add()") causes the ACPI fan driver
to fail probing on some systems which turns out to be due to the _FST
control method returning an invalid value until _FSL is first evaluated
for the given fan. If this happens, the .get_cur_state() cooling device
callback returns an error and __thermal_cooling_device_register() fails
as uses that callback after commit 31a0fa0019b0.
Arguably, _FST should not return an invalid value even if it is
evaluated before _FSL, so this may be regarded as a platform firmware
issue, but at the same time it is not a good enough reason for failing
the cooling device registration where the initial cooling device state
is only needed to initialize a thermal debug facility.
Accordingly, modify __thermal_cooling_device_register() to avoid
calling thermal_debug_cdev_add() instead of returning an error if the
initial .get_cur_state() callback invocation fails.
Fixes: 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()")
Closes: https://lore.kernel.org/linux-acpi/[email protected]
Reported-by: Laura Nao <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Tested-by: Laura Nao <[email protected]>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
There are some bugfix for the HNS3 ethernet driver
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe29 ("net: hns3: refine for set ring parameters")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Jijie Shao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.
To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.
Fixes: 45e92b7e4e27 ("net: hns3: add calling roce callback function when link status change")
Signed-off-by: Yonglong Liu <[email protected]>
Signed-off-by: Jijie Shao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Modify license to include dual licensing as GPL-2.0-only OR MIT
license for TI specific phy header files. This allows for Linux
kernel files to be used in other Operating System ecosystems
such as Zephyr or FreeBSD.
While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync
with latest SPDX conventions (GPL-2.0 is deprecated).
While at this, update the TI copyright year to sync with current year
to indicate license change.
Cc: Thomas Gleixner <[email protected]>
Cc: Trent Piepho <[email protected]>
Cc: Wadim Egorov <[email protected]>
Cc: Kip Broadhurst <[email protected]>
Signed-off-by: Udit Kumar <[email protected]>
Acked-by: Wadim Egorov <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|