aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-08-22nfs: fix bitmap decoder to handle a 3rd wordJeff Layton1-2/+4
It only decodes the first two words at this point. Have it decode the third word as well. Without this, the client doesn't send delegated timestamps in the CB_GETATTR response. With this change we also need to expand the on-stack bitmap in decode_recallany_args to 3 elements, in case the server sends a larger bitmap than expected. Fixes: 43df7110f4a9 ("NFSv4: Add CB_GETATTR support for delegated attributes") Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2024-08-22nfs: fix the fetch of FATTR4_OPEN_ARGUMENTSJeff Layton1-1/+2
The client doesn't properly request FATTR4_OPEN_ARGUMENTS in the initial SERVER_CAPS getattr. Add FATTR4_WORD2_OPEN_ARGUMENTS to the initial request. Fixes: 707f13b3d081 (NFSv4: Add support for the FATTR4_OPEN_ARGUMENTS attribute) Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2024-08-23Merge tag 'drm-msm-fixes-2024-08-19' of ↵Dave Airlie8-30/+37
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.11-rc5 1) Fixes from the virtual plane series, namely - fix the list of formats for QCM2290 since it has no YUV support - minor fix in dpu_plane_atomic_check_pipe() to check only for csc and not csc and scaler while allowing yuv formats - take rotation into account while allocating virtual planes 2) Fix to cleanup FB if dpu_format_populate_layout() fails. This fixes the warning splat during DRM file closure 3) Fix to reset the phy link params before re-starting link training. This fixes the 100% link training failure when someone starts modetest while cable is connected 4) Long pending fix to fix a visual corruption seen for 4k modes. Root-cause was we cannot support 4k@30 with 30bpp with 2 lanes so this is a critical fix to use 24bpp for such cases 5) Fix to move dpu encoder's connector assignment to atomic_enable(). This fixes the NULL ptr crash for cases when there is an atomic_enable() without atomic_modeset() after atomic_disable() . This happens for connectors_changed case of crtc. It fixes a NULL ptr crash reported during hotplug. 6) Fix to simplify DPU's debug macros without which dynamic debug does not work as expected 7) Fix the highest bank bit setting for sc7180 8) adreno: fix error return if missing firmware-name Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvxF2p3-AsjUydmSYrA0Vb+Ea7nh3VtNX0pT0Ae_Me-Kw@mail.gmail.com
2024-08-22smb/client: fix typo: GlobalMid_Sem -> GlobalMid_LockChenXiaoSong2-6/+6
The comments have typos, fix that to not confuse readers. Signed-off-by: ChenXiaoSong <[email protected]> Reviewed-by: Namjae Jeon <[email protected] Signed-off-by: Steve French <[email protected]>
2024-08-22cpufreq/amd-pstate: Use topology_logical_package_id() instead of ↵Gautham R. Shenoy1-1/+1
logical_die_id() After the commit 63edbaa48a57 ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf"), the topolgy_logical_die_id() function returns the logical Core Chiplet Die (CCD) ID instead of the logical socket ID. Since this is currently used to set MSR_AMD_CPPC_ENABLE, which needs to be set on any one of the threads of the socket, it is prudent to use topology_logical_package_id() in place of topology_logical_die_id(). Fixes: 63edbaa48a57 ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf") cc: [email protected] # 6.10 Signed-off-by: Gautham R. Shenoy <[email protected]> Tested-by: Dhananjay Ugwekar <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Dhananjay Ugwekar <[email protected]> Signed-off-by: Mario Limonciello <[email protected]>
2024-08-22cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()Dan Carpenter1-1/+1
Smatch complains that "ret" could be uninitialized: drivers/cpufreq/amd-pstate.c:734 amd_pstate_cpu_boost_update() error: uninitialized symbol 'ret'. This seems like it probably is a real issue. Initialize "ret" to zero to be safe. Fixes: c8c68c38b56f ("cpufreq: amd-pstate: initialize core precision boost state") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Perry Yuan <[email protected]> Acked-by: Gautham R. Shenoy <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/T/ Signed-off-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Mario Limonciello <[email protected]>
2024-08-22nvme: Remove unused fieldNilay Shroff1-1/+0
The "name" field in struct nvme_ctrl is unsued so removing it. This would help save 12 bytes of space for each nvme_ctrl instance created. Signed-off-by: Nilay Shroff <[email protected]> Reviewed-by: Kanchan Joshi <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2024-08-22nvme: move stopping keep-alive into nvme_uninit_ctrl()Ming Lei1-1/+1
Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup") moves starting keep-alive from nvme_start_ctrl() into nvme_init_ctrl_finish(), but don't move stopping keep-alive into nvme_uninit_ctrl(), so keep-alive work can be started and keep pending after failing to start controller, finally use-after-free is triggered if nvme host driver is unloaded. This patch fixes kernel panic when running nvme/004 in case that connection failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl(). This way is reasonable because keep-alive is now started in nvme_init_ctrl_finish(). Fixes: 3af755a46881 ("nvme: move nvme_stop_keep_alive() back to original position") Cc: Hannes Reinecke <[email protected]> Cc: Mark O'Donovan <[email protected]> Reported-by: Changhui Zhong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2024-08-22s390/iucv: Fix vargs handling in iucv_alloc_device()Alexandra Winter1-1/+3
iucv_alloc_device() gets a format string and a varying number of arguments. This is incorrectly forwarded by calling dev_set_name() with the format string and a va_list, while dev_set_name() expects also a varying number of arguments. Symptoms: Corrupted iucv device names, which can result in log messages like: sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952' Fixes: 4452e8ef8c36 ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()") Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425 Signed-off-by: Alexandra Winter <[email protected]> Reviewed-by: Thorsten Winkler <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-22net: ovs: fix ovs_drop_reasons errorMenglong Dong1-1/+1
There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is "OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1, which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION". And as Adrian tested, without the patch, adding flow to drop packets results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_ACTION_ERROR With the patch, the same results in: drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97) origin: software input port ifindex: 8 timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec protocol: 0x800 length: 98 original length: 98 drop reason: OVS_DROP_LAST_ACTION Fix this by initializing ovs_drop_reasons with index. Fixes: 9d802da40b7c ("net: openvswitch: add last-action drop reason") Signed-off-by: Menglong Dong <[email protected]> Tested-by: Adrian Moreno <[email protected]> Reviewed-by: Adrian Moreno <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-22Merge tag 'nf-24-08-22' of ↵Jakub Kicinski3-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 disable BH when collecting stats via hardware offload to ensure concurrent updates from packet path do not result in losing stats. From Sebastian Andrzej Siewior. Patch #2 uses write seqcount to reset counters serialize against reader. Also from Sebastian Andrzej Siewior. Patch #3 ensures vlan header is in place before accessing its fields, according to KMSAN splat triggered by syzbot. * tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: flowtable: validate vlan header netfilter: nft_counter: Synchronize nft_counter_reset() against reader. netfilter: nft_counter: Disable BH in nft_counter_offload_stats(). ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-22Merge branch 'net-xilinx-axienet-multicast-fixes-and-improvements'Jakub Kicinski2-12/+14
Sean Anderson says: ==================== net: xilinx: axienet: Multicast fixes and improvements [part] ==================== First two patches of the series which are fixes. Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-22net: xilinx: axienet: Fix dangling multicast addressesSean Anderson2-12/+10
If a multicast address is removed but there are still some multicast addresses, that address would remain programmed into the frame filter. Fix this by explicitly setting the enable bit for each filter. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-22net: xilinx: axienet: Always disable promiscuous modeSean Anderson1-0/+4
If promiscuous mode is disabled when there are fewer than four multicast addresses, then it will not be reflected in the hardware. Fix this by always clearing the promiscuous mode flag even when we program multicast addresses. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-22firmware: microchip: fix incorrect error report of programming:timeout on ↵Steve Wilkins1-1/+1
success After successfully programming the SPI flash with an MFPS auto update image, the error sysfs attribute reports programming:timeout. This is caused by an incorrect check on the return value from wait_for_completion_timeout() in mpfs_auto_update_poll_complete(). Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support") Signed-off-by: Steve Wilkins <[email protected]> Signed-off-by: Conor Dooley <[email protected]>
2024-08-22thermal: of: Fix OF node leak in of_thermal_zone_find() error pathsKrzysztof Kozlowski1-6/+7
Terminating for_each_available_child_of_node() loop requires dropping OF node reference, so bailing out on errors misses this. Solve the OF node reference leak with scoped for_each_available_child_of_node_scoped(). Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]>
2024-08-22thermal: of: Fix OF node leak in thermal_of_zone_register()Krzysztof Kozlowski1-1/+5
thermal_of_zone_register() calls of_thermal_zone_find() which will iterate over OF nodes with for_each_available_child_of_node() to find matching thermal zone node. When it finds such, it exits the loop and returns the node. Prematurely ending for_each_available_child_of_node() loops requires dropping OF node reference, thus success of of_thermal_zone_find() means that caller must drop the reference. Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Cc: All applicable <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]>
2024-08-22thermal: of: Fix OF node leak in thermal_of_trips_init() error pathKrzysztof Kozlowski1-2/+2
Terminating for_each_child_of_node() loop requires dropping OF node reference, so bailing out after thermal_of_populate_trip() error misses this. Solve the OF node reference leak with scoped for_each_child_of_node_scoped(). Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately") Cc: All applicable <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]>
2024-08-22nfsd: ensure that nfsd4_fattr_args.context is zeroed outJeff Layton1-1/+3
If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to checking for the security label, then args.context will be set to uninitialized junk on the stack, which we'll then try to free. Initialize it early. Fixes: f59388a579c6 ("NFSD: Add nfsd4_encode_fattr4_sec_label()") Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
2024-08-23kbuild: fix typos "prequisites" to "prerequisites"Masahiro Yamada4-4/+4
This typo in scripts/Makefile.build has been present for more than 20 years. It was accidentally copy-pasted to other scripts/Makefile.* files. Fix them all. Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]>
2024-08-22smb: client: ignore unhandled reparse tagsPaulo Alcantara1-4/+7
Just ignore reparse points that the client can't parse rather than bailing out and not opening the file or directory. Reported-by: Marc <[email protected]> Closes: https://lore.kernel.org/r/CAMHwNVv-B+Q6wa0FEXrAuzdchzcJRsPKDDRrNaYZJd6X-+iJzw@mail.gmail.com Fixes: 539aad7f14da ("smb: client: introduce ->parse_reparse_point()") Tested-by: Anthony Nandaa (Microsoft) <[email protected]> Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-08-22smb3: fix problem unloading module due to leaked refcount on shutdownSteve French3-0/+6
The shutdown ioctl can leak a refcount on the tlink which can prevent rmmod (unloading the cifs.ko) module from working. Found while debugging xfstest generic/043 Fixes: 69ca1f57555f ("smb3: add dynamic tracepoints for shutdown ioctl") Reviewed-by: Meetakshi Setiya <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-08-22s390/boot: Fix KASLR base offset off by __START_KERNEL bytesAlexander Gordeev6-31/+52
Symbol offsets to the KASLR base do not match symbol address in the vmlinux image. That is the result of setting the KASLR base to the beginning of .text section as result of an optimization. Revert that optimization and allocate virtual memory for the whole kernel image including __START_KERNEL bytes as per the linker script. That allows keeping the semantics of the KASLR base offset in sync with other architectures. Rename __START_KERNEL to TEXT_OFFSET, since it represents the offset of the .text section within the kernel image, rather than a virtual address. Still skip mapping TEXT_OFFSET bytes to save memory on pgtables and provoke exceptions in case an attempt to access this area is made, as no kernel symbol may reside there. In case CONFIG_KASAN is enabled the location counter might exceed the value of TEXT_OFFSET, while the decompressor linker script forcefully resets it to TEXT_OFFSET, which leads to a sections overlap link failure. Use MAX() expression to avoid that. Reported-by: Omar Sandoval <[email protected]> Closes: https://lore.kernel.org/linux-s390/[email protected]/ Fixes: 56b1069c40c7 ("s390/boot: Rework deployment of the kernel image") Signed-off-by: Alexander Gordeev <[email protected]> Acked-by: Vasily Gorbik <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-08-22s390/boot: Avoid possible physmem_info segment corruptionAlexander Gordeev1-2/+2
When physical memory for the kernel image is allocated it does not consider extra memory required for offsetting the image start to match it with the lower 20 bits of KASLR virtual base address. That might lead to kernel access beyond its memory range. Suggested-by: Vasily Gorbik <[email protected]> Fixes: 693d41f7c938 ("s390/mm: Restore mapping of kernel image using large pages") Signed-off-by: Alexander Gordeev <[email protected]> Acked-by: Vasily Gorbik <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2024-08-22ASoC: cs-amp-lib: Ignore empty UEFI calibration entriesRichard Fitzgerald1-1/+6
If the timestamp of a calibration entry is 0 it is an unused entry and must be ignored. Some end-products reserve EFI space for calibration entries by shipping with a zero-filled EFI file. When searching the file for calibration data the driver must skip the empty entries. The timestamp of a valid entry is always non-zero. Signed-off-by: Richard Fitzgerald <[email protected]> Fixes: 1cad8725f2b9 ("ASoC: cs-amp-lib: Add helpers for factory calibration data") Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-08-22smb/server: update misguided comment of smb2_allocate_rsp_buf()ChenXiaoSong1-1/+1
smb2_allocate_rsp_buf() will return other error code except -ENOMEM. Signed-off-by: ChenXiaoSong <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-08-22smb/server: remove useless assignment of 'file_present' in smb2_open()ChenXiaoSong1-1/+0
The variable is already true here. Signed-off-by: ChenXiaoSong <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-08-22smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()ChenXiaoSong2-6/+6
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) and parse_lease_state() return NULL. Fix this by check if 'lease_ctx_info' is NULL. Additionally, remove the redundant parentheses in parse_durable_handle_context(). Signed-off-by: ChenXiaoSong <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-08-22smb/server: fix return value of smb2_open()ChenXiaoSong1-1/+1
In most error cases, error code is not returned in smb2_open(), __process_request() will not print error message. Fix this by returning the correct value at the end of smb2_open(). Signed-off-by: ChenXiaoSong <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-08-22ksmbd: the buffer of smb2 query dir response has at least 1 byteNamjae Jeon1-1/+2
When STATUS_NO_MORE_FILES status is set to smb2 query dir response, ->StructureSize is set to 9, which mean buffer has 1 byte. This issue occurs because ->Buffer[1] in smb2_query_directory_rsp to flex-array. Fixes: eb3e28c1e89b ("smb3: Replace smb2pdu 1-element arrays with flex-arrays") Cc: [email protected] # v6.1+ Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-08-22bcachefs: don't use rht_bucket() in btree_key_cache_scan()Kent Overstreet1-3/+27
rht_bucket() does strange complicated things when a rehash is in progress. Instead, just skip scanning when a rehash is in progress: scanning is going to be more expensive (many more empty slots to cover), and some sort of infinite loop is being observed Signed-off-by: Kent Overstreet <[email protected]>
2024-08-22bcachefs: add missing inode_walker_exit()Kent Overstreet1-0/+2
fix a small leak Signed-off-by: Kent Overstreet <[email protected]>
2024-08-22Merge branch 'maintainers-networking-updates'Paolo Abeni1-6/+26
Simon Horman says: ==================== MAINTAINERS: Networking updates This series includes Networking-related updates to MAINTAINERS. * Patches 1-4 aim to assign header files with "*net*' and '*skbuff*' in their name to Networking-related sections within Maintainers. There are a few such files left over after this patches. I have to sent separate patches to add them to SCSI SUBSYSTEM and NETWORKING DRIVERS (WIRELESS) sections [1][2]. [1] https://lore.kernel.org/linux-scsi/[email protected]/ [2] https://lore.kernel.org/linux-wireless/[email protected]/ * Patch 5 updates the status of the JME driver to 'Odd Fixes' ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22MAINTAINERS: Mark JME Network Driver as Odd FixesSimon Horman1-1/+1
This driver only appears to have received sporadic clean-ups, typically part of some tree-wide activity, and fixes for quite some time. And according to the maintainer, Guo-Fu Tseng, the device has been EOLed for a long time (see Link). Accordingly, it seems appropriate to mark this driver as odd fixes. Cc: Moon Yeounsu <[email protected]> Cc: Guo-Fu Tseng <[email protected]> Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22MAINTAINERS: Add header files to NETWORKING sectionsSimon Horman1-0/+17
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" or "skbuff" in their name. This patch adds a number of such files to the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22MAINTAINERS: Add limited globs for Networking headersSimon Horman1-5/+5
This aims to add limited globs to improve the coverage of header files in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections. It is done so in a minimal way to exclude overlap with other sections. And so as not to require "X" entries to exclude files otherwise matched by these new globs. While imperfect, due to it's limited nature, this does extend coverage of header files by these sections. And aims to automatically cover new files that seem very likely belong to these sections. The include/linux/netdev* glob (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdevice_xmit.h - include/linux/netdev_features.h The include/uapi/linux/netdev* globs: (both sections) + Subsumes the entries for: - include/linux/netdevice.h + Extends the sections to cover - include/linux/netdev.h The include/linux/skbuff* glob (NETWORKING [GENERAL] section only): + Subsumes the entry for: - include/linux/skbuff.h + Extends the section to cover - include/linux/skbuff_ref.h A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL] section. Although it would subsume the entry for include/uapi/linux/net_namespace.h, which is fine, it would also extend coverage to: - include/uapi/linux/net_dropmon.h, which belongs to the NETWORK DROP MONITOR section - include/uapi/linux/net_tstamp.h which, as per an earlier patch in this series, belongs to the SOCKET TIMESTAMPING section Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING sectionSimon Horman1-0/+1
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. Cc: Richard Cochran <[email protected]> Cc: Willem de Bruijn <[email protected]> Signed-off-by: Simon Horman <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22MAINTAINERS: Add sonet.h to ATM section of MAINTAINERSSimon Horman1-0/+2
This is part of an effort to assign a section in MAINTAINERS to header files that relate to Networking. In this case the files with "net" in their name. It seems that sonet.h is included in ATM related source files, and thus that ATM is the most relevant section for these files. Cc: Chas Williams <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22ASoC: cs-amp-lib-test: Force test calibration blob entries to be validRichard Fitzgerald1-0/+9
For a normal calibration blob the calTarget values must be non-zero and unique, and the calTime values must be non-zero. Don't rely on get_random_bytes() to be random enough to guarantee this. Force the calTarget and calTime values to be valid while retaining randomness in the values. Signed-off-by: Richard Fitzgerald <[email protected]> Fixes: 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers") Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-08-22spi: pxa2xx: Move PM runtime handling to the glue driversAndy Shevchenko3-17/+35
PCI and platform buses have different defaults for runtime PM. In particular PCI probe is assumed to be called when PM runtime is enabled by the PCI core. In this case if we try enable it again the PM runtime complaints with pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable! Fix this by moving PM runtime handling from the SPI PXA2xx core to the glue drivers. Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly") Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file") Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-08-22spi: pxa2xx: Do not override dev->platform_data on probeAndy Shevchenko4-9/+7
The platform_data field may be supplied by legacy board code. In other cases we override it, and module remove and probe cycle will crash the kernel since it will carry a stale pointer. Fix this by supplying a third argument to the pxa2xx_spi_probe() and avoid overriding dev->platform_data. Reported-by: Hao Ma <[email protected]> Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly") Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file") Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-08-22octeontx2-af: Fix CPT AF register offset calculationBharat Bhushan1-12/+11
Some CPT AF registers are per LF and others are global. Translation of PF/VF local LF slot number to actual LF slot number is required only for accessing perf LF registers. CPT AF global registers access do not require any LF slot number. Also, there is no reason CPT PF/VF to know actual lf's register offset. Without this fix microcode loading will fail, VFs cannot be created and hardware is not usable. Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write") Signed-off-by: Bharat Bhushan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211FSava Jakovljev1-1/+2
The current implementation incorrectly sets the mode bit of the PHY chip. Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the configuration nibble of a LED- it should be set independently of the index of the LED being configured. As a consequence, the RTL8211F LED control is actually operating in Mode A. Fix the error by or-ing final register value to write with a const-value of RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly. Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") Signed-off-by: Sava Jakovljev <[email protected]> Reviewed-by: Marek Vasut <[email protected]> Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22net: ngbe: Fix phy mode set to external phyMengyuan Lou1-2/+6
The MAC only has add the TX delay and it can not be modified. MAC and PHY are both set the TX delay cause transmission problems. So just disable TX delay in PHY, when use rgmii to attach to external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers. And it is does not matter to internal phy. Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink") Signed-off-by: Mengyuan Lou <[email protected]> Cc: [email protected] # 6.3+ Reviewed-by: Jacob Keller <[email protected]> Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com Signed-off-by: Paolo Abeni <[email protected]>
2024-08-22ALSA: hda/realtek - FIxed ALC285 headphone no soundKailang Yang1-12/+14
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug headphone or headset. It had a chance to get no sound from headphone. Replace depop procedure will solve this issue. Signed-off-by: Kailang Yang <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-08-22netfilter: flowtable: validate vlan headerPablo Neira Ayuso2-0/+6
Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline] Fixes: 4cd91f7c290f ("netfilter: flowtable: add vlan support") Reported-by: [email protected] Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-08-22usb: dwc3: st: add missing depopulate in probe error pathKrzysztof Kozlowski1-1/+4
Depopulate device in probe error paths to fix leak of children resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-08-22usb: dwc3: st: fix probed platform device ref count on probe error pathKrzysztof Kozlowski1-8/+3
The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-08-22usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)Michael Grzeschik1-1/+2
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Commit f2e0eee47038 ("usb: dwc3: ep0: Don't reset resource alloc flag") was fixing the initial issue, but did this only for physical ep1. Since the function dwc3_ep0_stall_and_restart is resetting the flags for both physical endpoints, this also has to be done for ep0. Cc: [email protected] Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Acked-by: Thinh Nguyen <[email protected]> Signed-off-by: Michael Grzeschik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-08-22usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in ↵Zijun Hu1-0/+1
remove_power_attributes() Device attribute group @usb3_hardware_lpm_attr_group is merged by add_power_attributes(), but it is not unmerged explicitly, fixed by unmerging it in remove_power_attributes(). Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") Cc: [email protected] Signed-off-by: Zijun Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.