| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There will be three devices for this sound card, hw:x,0 is
the playback device for one SAI, hw:x,1 is the playback device
for another SAI, hw:x,2 is the capture device for audmix
output. then capture device and playback device can be configured
with different master/slave mode.
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
As audmix requires playback and capture stream in different
master/slave mode, so separate playback and capture stream to
different DAI. There are three DAIs required, two DAIs for playback
one DAI for capture.
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The transmitter and receiver part of the SAI interface need to be
configured with different master/slave mode, especially to work
with the audiomix module.
+-------+ +-----------+
| SAI1 | --TX--> | |
| | <--RX-- | |
+-------+ | |
| AUDIOMIX |
+-------+ | |
| SAI2 | --TX--> | |
+-------+ +-----------+
The SAI1 TX is in master mode, but SAI1 RX is in slave mode.
So add another two DAIs for TX and RX separately. but only
defined fsl_sai_set_dai_fmt_tx() and fsl_sai_set_dai_fmt_rx()
ops function for current case, in the future, the other ops
function for TX and RX can be defined if required.
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card2 still not yet support it. Let's support it.
Cc: Maxim Kochetkov <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card / Audio Graph Card still not support it. Let's support it.
Cc: Maxim Kochetkov <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Sound Card need to consider/adjust HW control ordering based on the
combination of CPU/Codec. The controlling feature is already supported
on ASoC, but Simple Audio Card / Audio Graph Card still not support it.
Let's support it.
Cc: Maxim Kochetkov <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Replace 'int' with proper 'enum lpass_codec_version' in every place
which handles the parsed codec version (not raw register values!) to be
explicit about contents of the variable. This makes code easier to read
and compilers could check missing switch cases.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Qualcomm LPASS macro codec driver parses registers in order to
detect version of the codec. It recognizes codecs v2.0 - v2.8, however
we know that there are earlier versions and 'enum lpass_codec_version'
has also v1.0, v1.1 and v1.2. If by any chance we run on unrecognized
version, driver will use random value from the stack as the codec
version.
Fix it by mapping such cases to an enum of value 0:
LPASS_CODEC_VERSION_UNKNOWN.
Fixes: 378918d59181 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Starting with v2.5 of Qualcomm LPASS Codec, few registers in the WSA
macro block change. Bring proper support for this v2.5 and newer
versions, to fix second speaker playback (speaker was silent).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-3-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <[email protected]>
|
|
The driver for Qualcomm LPASS WSA macro codec was developed and tested
on codec v2.1, however v2.5 has significant changes in the registers.
The driver correctly works for v2.1 codec, but has issues when running
on SoC with v2.5 codec (so starting with SM8450, even though playback
works properly on that SoC).
Prepare the driver for handling differences in register layouts of newer
version. This does not have functional impact on older codec versions,
but just:
1. Renames few soc_enums and widgets as v2.1,
2. For registers being different in v2.5, moves the defaults and regmap
configuration to new structures,
3. Adds new 'struct wsa_reg_layout' with offsets and masks for few
registers, so most of the code can stay unchaged on v2.5,
4. Chooses proper widgets, regmap config and register layout based on
version of the codec.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-2-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <[email protected]>
|
|
WSA_MACRO_MUX_INP_MASK2 define is not used.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-1-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <[email protected]>
|
|
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The SDCA spec defines a 'selected_mode' control which can override
the 'detected_mode' reported by hardware.
This is useful for platform integration as well as in cases
where the hardware(e.g. 3.5mm jack cable) is not able to accurately detect the jack type.
Signed-off-by: Shuming Fan <[email protected]>
Tested-by: [email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We have also v2.1 version of the codec (see 'enum lpass_codec_version'),
so handle it as well in all switch cases.
Fixes: dbacef05898d ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Srinivas Kandagatla <[email protected]>
Link: https://patch.msgid.link/[email protected]
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Commit ae8fc2948b48 ("ASoC: dt-bindings: add missing vender prefix on
filename") renames a few files in Documentation/devicetree/bindings/sound/,
but misses to adjust the file entries pointing to those files in
MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.
Adjust the file entries in NXP SGTL5000 DRIVER and TEXAS INSTRUMENTS AUDIO
(ASoC/HDA) DRIVERS.
Signed-off-by: Lukas Bulwahn <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Pierre-Louis Bossart <[email protected]>:
Minor additions and cleanups this time.
|
|
Merge series from Zhang Yi <[email protected]>:
We propose four patches to solve headphone detection and suspend issues.
And there are several registers that should be read-only registers. So
we create es8326_writeable_register, and set these registers to false.
|
|
Cs42l43 bridge mode needs the two configurations.
Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Jack detection needs to rely on JD2, as most other Dell
AlderLake-based devices.
Closes: https://github.com/thesofproject/linux/issues/5021
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a helper function max_98373_get_tx_mask() to get tx mask from
max98373 ACPI device properties at runtime.
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Experimental tests show that JD2_100K is required, otherwise the jack
is detected always even with nothing plugged-in.
To avoid matching with other known quirks the SKU information is used.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
to support corresponding TAS2563/TAS2781s
Add name_prefix as the prefix name of firmwares and
kcontrol to support corresponding TAS2563/TAS2781s.
name_prefix is not mandatory.
Signed-off-by: Shenghao Ding <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
It is incorrect to request the input pin format of the destination widget
using the output pin index of the source module as the indexes are not
necessarily matching.
moduleA.out_pin1 can be connected to moduleB.in_pin0 for example.
Use the dst_queue_id to request the input format of the destination module.
This bug remained unnoticed likely because in nocodec topologies we don't
have process modules after a module copier, thus the pin/queue index is
ignored.
For the process module case, the code was likely have been tested in a
controlled way where all the pin/queue/format properties were present to
work.
Update the debug prints to have better information.
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Cc: [email protected] # v6.8+
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
There are two hardware connection methods for DMICs on the MT6358. In cases
where more than two DMICs are used, we need to time-multiplex these DMICs.
Therefore, we need to dynamically switch the modes of these DMICs based on
the actual usage scenarios.
---- DMIC1
AU_VIN0 ---
---- DMIC2
AU_VIN2 --- ----DMIC3
When we want to use DMIC1/2, configure it to one-wire mode. When we want to
use DMIC1/3, configure it to two-wire mode.
Signed-off-by: Jiaxin Yu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We modified the regmap_config members to fix cach sync error.
There are several registers that should be read-only registers.
If these registers are written while synchronizing the register values,
the codec will enter an error state.So we create es8326_writeable_register,
and set these registers to false
Signed-off-by: Zhang Yi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Executing regcache_sync at initialization, we can hear a gentle pop
noise. So we created es8326_init for initialization instead of
executing es8326_resume
Signed-off-by: Zhang Yi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We modified the headphone detection setting to avoid an error button state
after codec resume from suspend state
Signed-off-by: Zhang Yi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Andrejs Cainikovs <[email protected]>:
This change adds local MCLK handling, which would cover a case when a
reference audio clock is present in a system, but is not allowed to be
changed, see [1].
[1]: https://lore.kernel.org/all/[email protected]/
|
|
Merge series from [email protected]:
This patchset adds support for.
1. parse Display Port module tokens from ASoC topology
2. add support to DP/HDMI Jack events.
3. fixes a typo in function name in sm8250
Verified these patches on X13s along with changes to tplg in
https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads
and ucm changes from https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp
x1e80100 is verified by Krzysztof with his changes in tplg
https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/merge_requests/7/commits
|
|
Merge series from Krzysztof Kozlowski <[email protected]>:
Make few pointers in ASoC functions as pointers to const, so the code is
clearer to read, a bit safer and allows further constifications (e.g.
placing some data as rodata).
|
|
Merge series from Kuninori Morimoto <[email protected]>:
This is v3 patch-set for ak4619 driver.
It was created by Khanh, and I updated/adjusted to upstream.
It was tested on Renesas V4M GrayH
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Merge series from Christian Hewitt <[email protected]>:
Update bindings and add a driver compatible for the pcm5242
chip used on the Odroid HiFi-Shield2 i2c mezzanine board.
|
|
Merge series from Krzysztof Kozlowski <[email protected]>:
Set of simple cleanups from similar issues in all Qualcomm WCD93xx
codecs.
The first patch "ASoC: codecs: wcd-mbhc: Constify passed MBHC reg
fields" is a requirement for few others, but except this they are
independent.
|
|
Merge series from Neil Armstrong <[email protected]>:
Convert the text bindings of the Everest ES7241/ES7134/7144/7154 2 channels
I2S analog to digital converter to dt-schema.
|
|
Merge series from Ricard Wanderlof <[email protected]>:
In some cases, depending on system design, the MICBIAS pins on the
chip are not needed as such, but a couple of extra GPIO pins would be
useful. This patch allows the MICBIAS pins to be configured in the
device tree as general purpose output pins, controlled via the GPIO
framework.
Owing to their originally intended purpose there are some limitations:
when the MICBIAS pins are deactivated, they will float, so will likely
need a pulldown in many applications. When activated, they will
assume the voltage specified by the micbias1-vg and micbias2-vg
properties, respectively, meaning that the resulting output voltage
will be 2.0 V, 2.5 V or AVDD .
|
|
Merge series from Paul Handrigan <[email protected]>:
This patchset provides ASoC support for the latest family
of Cirrus Logic multichannel, high performance audio ADCs.
The devices that are supported are CS5302 (2 channel ADC),
CS5304 (4 channel ADC), and CS5308 (8 channel ADC).
|
|
Add ti,pcm5242 to the pcm512x driver file
Signed-off-by: Christian Hewitt <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a compatible string to enable support for the ti,pcm5242 DAC chip
in the pcm512x driver.
Signed-off-by: Christian Hewitt <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add support for the cs530x family of high performance
ADCs.
Signed-off-by: Paul Handrigan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add the YAML DT bindings for the cs530x high performance
audio ADCs.
Signed-off-by: Paul Handrigan <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
pcmdevice_i2c_probe()
The value “-ENOMEM” was assigned to the local variable “ret”
in one if branch after a devm_kzalloc() call failed at the beginning.
This error code will trigger then a pcmdevice_remove() call with a passed
null pointer so that an undesirable dereference will be performed.
Thus return the appropriate error code directly.
Fixes: 1324eafd37aa ("ASoc: PCM6240: Create PCM6240 Family driver code")
Signed-off-by: Hao Ge <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ACP common dma driver has a buffer size and period size restriction
which should be 64 byte aligned. Add pcm constraints for the same.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
I2S clock generation registers should be programmed before starting the I2S
dma when I2S controller is programmed as clock master. Move i2s clock
generation register programming sequence prior to i2s dma start.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ACP provides different IO configurations(ACP PDM, I2S and SoundWire).
I2S mclk should be programmed only when I2S configuration is selected and
I2S controller is programmed as clock master.
Modify the conditional check for programming i2s mclk.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Remove unused variables i2s_pin_cfg_offset and i2s_mode from acp_resource
structure entries.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|