aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-01-21xen: p2m: correctly initialize partial p2m leafStefan Bader1-1/+19
After changing the p2m mapping to a tree by commit 58e05027b530ff081ecea68e38de8d59db8f87e0 xen: convert p2m to a 3 level tree and trying to boot a DomU with 615MB of memory, the following crash was observed in the dump: kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c0107397>] xen_set_pte+0x27/0x60 *pdpt = 0000000000000000 *pde = 0000000000000000 Adding further debug statements showed that when trying to set up pfn=0x26700 the returned mapping was invalid. pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003) pfn=0x26700 calling set_pte(0xc1fe7800, 0x3) Although the last_pfn obtained from the startup info is 0x26700, which should in turn not be hit, the additional 8MB which are added as extra memory normally seem to be ok. This lead to looking into the initial p2m tree construction, which uses the smaller value and assuming that there is other code handling the extra memory. When the p2m tree is set up, the leaves are directly pointed to the array which the domain builder set up. But if the mapping is not on a boundary that fits into one p2m page, this will result in the last leaf being only partially valid. And as the invalid entries are not initialized in that case, things go badly wrong. I am trying to fix that by checking whether the current leaf is a complete map and if not, allocate a completely new page and copy only the valid pointers there. This may not be the most efficient or elegant solution, but at least it seems to allow me booting DomUs with memory assignments all over the range. BugLink: http://bugs.launchpad.net/bugs/686692 [v2: Redid a bit of commit wording and fixed a compile warning] Signed-off-by: Stefan Bader <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-01-21Merge branch 'for_linus' of ↵Linus Torvalds8-84/+56
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix deadlock during path resolution
2011-01-21perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splatPeter Zijlstra1-0/+3
Lockdep spotted: loop_1b_instruc/1899 is trying to acquire lock: (event_mutex){+.+.+.}, at: [<ffffffff810e1908>] perf_trace_init+0x3b/0x2f7 but task is already holding lock: (&ctx->mutex){+.+.+.}, at: [<ffffffff810eb45b>] perf_event_init_context+0xc0/0x218 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ctx->mutex){+.+.+.}: -> #2 (cpu_hotplug.lock){+.+.+.}: -> #1 (module_mutex){+.+...}: -> #0 (event_mutex){+.+.+.}: But because the deadlock would be cpuhotplug (cpu-event) vs fork (task-event) it cannot, in fact, happen. We can annotate this by giving the perf_event_context used for the cpuctx a different lock class from those used by tasks. Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <[email protected]>
2011-01-21x86, mcheck, therm_throt.c: Export symbol platform_thermal_notify to allow ↵Fenghua Yu1-0/+1
coretemp to handler intr In therm_throt.c, commit 9e76a97efd31a08cb19d0ba12013b8fb4ad3e474 patch doesn't export the symbol platform_thermal_notify. Other drivers (e.g. drivers/hwmon/coretemp.c) can not find the symbol platform_thermal_notify when defining threshould interrupt handler. Please apply this patch to allow threshold interrupt handler in coretemp. Signed-off-by: Fenghua Yu <[email protected]> Cc: R Durgadoss <[email protected]> Cc: [email protected] <[email protected]> Cc: [email protected] <[email protected]> Cc: Guenter Roeck <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-01-21x86: Use asm-generic/cacheflush.hAkinobu Mita1-41/+1
The implementation of the cache flushing interfaces on the x86 is identical with the default implementation in asm-generic. Signed-off-by: Akinobu Mita <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2011-01-21um: Use generic irq KconfigThomas Gleixner1-5/+1
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Jeff Dike <[email protected]>
2011-01-21tile: Use generic irq KconfigThomas Gleixner1-29/+21
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Chris Metcalf <[email protected]>
2011-01-21sparc: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: "David S. Miller" <[email protected]>
2011-01-21score: Use generic irq KconfigThomas Gleixner1-3/+4
No functional change Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Chen Liqin <[email protected]>
2011-01-21powerpc: Use generic irq KconfigThomas Gleixner1-21/+3
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]>
2011-01-21parisc: Use generic irq KconfigThomas Gleixner1-10/+4
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Kyle McMartin <[email protected]> Acked-by: James Bottomley <[email protected]>
2011-01-21mn10300: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: David Howells <[email protected]>
2011-01-21microblaze: Use generic irq KconfigThomas Gleixner1-6/+2
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Michal Simek <[email protected]>
2011-01-21m68knommu: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Greg Ungerer <[email protected]>
2011-01-21ia64: Use generic irq KconfigThomas Gleixner1-19/+4
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Tony Luck <[email protected]>
2011-01-21frv: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: David Howells <[email protected]>
2011-01-21blackfin: Use generic irq KconfigThomas Gleixner1-11/+3
No functional change. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Mike Frysinger <[email protected]>
2011-01-21alpha: Use generic irq KconfigThomas Gleixner1-13/+3
Signed-off-by: Thomas Gleixner <[email protected]> Cc: Richard Henderson <[email protected]>
2011-01-21genirq: Remove __do_IRQThomas Gleixner18-183/+0
All architectures are finally converted. Remove the cruft. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Mike Frysinger <[email protected]> Cc: David Howells <[email protected]> Cc: Tony Luck <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Michal Simek <[email protected]> Acked-by: David Howells <[email protected]> Cc: Kyle McMartin <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> Cc: Chen Liqin <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Chris Metcalf <[email protected]> Cc: Jeff Dike <[email protected]>
2011-01-21m32r: Convert to generic irq KconfigThomas Gleixner1-8/+3
Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as we have converted all irq_chip functions. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert usrv platform irq handlingThomas Gleixner1-48/+40
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert opsput_lcdpld irq chipThomas Gleixner1-26/+16
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert opsput lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert opsput pld irq chipThomas Gleixner1-26/+20
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert opsput irq chipThomas Gleixner1-31/+27
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert oaks32r irq chipsThomas Gleixner1-25/+22
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert mappi3 irq chipThomas Gleixner1-31/+31
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert mappi2 irq chipThomas Gleixner1-29/+30
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert mappi irq chipsThomas Gleixner1-27/+26
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert m32700ut lcdpld irq chipThomas Gleixner1-20/+12
Convert the irq chip to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert m32700ut lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert m32700ut pld irq chipThomas Gleixner1-28/+20
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert m32104ut irq chipThomas Gleixner1-29/+27
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Convert m32104ut irq handlingThomas Gleixner1-25/+21
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21m32r: Cleanup direct irq_desc accessThomas Gleixner9-307/+83
The irq descriptors are already initialized by the generic code. Remove the redundant init code and set the irq chip with the proper accessor function. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21cris: Use generic irq KconfigThomas Gleixner2-5/+3
Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as we have converted all irq_chip functions. Fix the fallout in show_interrupts(). Signed-off-by: Thomas Gleixner <[email protected]> Cc: Mikael Starvik <[email protected]>
2011-01-21cris: Convert V32 interrupt handlingThomas Gleixner1-35/+15
Convert the irq chip functions and install handle_simple_irq for each interrupt to get rid of __do_IRQ() Signed-off-by: Thomas Gleixner <[email protected]> Cc: Mikael Starvik <[email protected]>
2011-01-21cris: Convert V10 interrupt handlingThomas Gleixner1-31/+10
Convert the irq_chip functions and install handle_simple_irq for each interrupt. This converts V10 to the flow handling and lets us remove __do_IRQ(). Signed-off-by: Thomas Gleixner <[email protected]> Cc: Mikael Starvik <[email protected]>
2011-01-21cris: Use irq handling wrapperThomas Gleixner1-2/+2
Use the wrapper around __do_IRQ() so we can convert V10 and V32 seperately. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Mikael Starvik <[email protected]>
2011-01-21h8300: Use generic irq KconfigThomas Gleixner2-5/+3
Switch to the generic irq Kconfig. h8300 has all irq chips converted to the new functions, so select the GENERIC_HARDIRQS_NO_DEPRECATED switch as well. Fixup the resulting fallout in show_interrupts(). Signed-off-by: Thomas Gleixner <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21h8300: Convert interrupt handling to flow handlerThomas Gleixner1-12/+3
__do_IRQ is deprecated so h8300 needs to be converted to proper flow handling. The irq chip is simple and does not required any mask/ack/eoi functions, so we can use handle_simple_irq. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-21h8300: Convert to new irq_chip functionsThomas Gleixner1-17/+16
No functional change, just straight forward conversion. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Paul Mundt <[email protected]>
2011-01-20net_sched: accurate bytes/packets stats/ratesEric Dumazet14-33/+29
In commit 44b8288308ac9d (net_sched: pfifo_head_drop problem), we fixed a problem with pfifo_head drops that incorrectly decreased sch->bstats.bytes and sch->bstats.packets Several qdiscs (CHOKe, SFQ, pfifo_head, ...) are able to drop a previously enqueued packet, and bstats cannot be changed, so bstats/rates are not accurate (over estimated) This patch changes the qdisc_bstats updates to be done at dequeue() time instead of enqueue() time. bstats counters no longer account for dropped frames, and rates are more correct, since enqueue() bursts dont have effect on dequeue() rate. Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-01-20Input: sparse-keymap - fix KEY_VSW handling in sparse_keymap_setupDmitry Torokhov1-0/+1
We were forgetting to set up device capabilities for KEY_VSW entries. Reported-by: Tapio Vihuri <[email protected]> Tested-by: Tapio Vihuri <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-01-20Input: tegra-kbc - add tegra keyboard driverRakesh Iyer4-0/+799
This patch adds support for the internal matrix keyboard controller for Nvidia Tegra platforms. Signed-off-by: Rakesh Iyer <[email protected]> Reviewed-by: Trilok Soni <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-01-20Input: gpio_keys - switch to using request_any_context_irqPhilippe Langlais1-3/+3
The driver does not require hardirq context and can work with threaded interrupts as well, so let's switch to request_any_context_irq which will select the context that is available for us. Signed-off-by: Philippe Langlais <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-01-20Input: serio - allow registered drivers to get status flagDavid Engraf1-4/+20
Parse and pass the status byte information to the registered serio drivers as well as the data bytes. Signed-off-by: David Engraf<[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-01-21Merge branch 'fix/asoc' into for-linusTakashi Iwai7-68/+55
2011-01-21Merge branch 'fix/misc' into for-linusTakashi Iwai1-0/+7
2011-01-21powerpc/mpic: Fix mask/unmask timeout messageScott Wood1-2/+4
Don't say that enable timed out when it was disable, and show which IRQ had the problem. Signed-off-by: Scott Wood <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>