aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-10-03Merge tag 'regulator-fix-v6.6-rc4' of ↵Linus Torvalds2-10/+18
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two things here, one is an improved fix for issues around freeing devices when registration fails which replaces a half baked fix with a more complete one which uses the device model release() function properly. The other fix is a device specific fix for mt6358, the driver said that the LDOs supported mode configuration but this is not actually the case and could cause issues" * tag 'regulator-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator/core: Revert "fix kobject release warning and memory leak in regulator_register()" regulator/core: regulator_register: set device->class earlier regulator: mt6358: split ops for buck and linear range LDO regulators
2023-10-03Merge tag 'regmap-fix-v6.6-rc4' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A fix for a long standing issue where when we create a new node in an rbtree register cache we were failing to convert the register address of the new register into a bitmask correctly and marking the wrong register as being present in the newly created node. This would only have affected devices with a register stride other than 1 but would corrupt data on those devices" * tag 'regmap-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: rbtree: Fix wrong register marked as in-cache when creating new node
2023-10-03Merge tag 'scsi-fixes' of ↵Linus Torvalds6-29/+63
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes, all in drivers. The fnic one is the most extensive because the little used user initiated device reset path never tagged the command and adding a tag is rather involved. The other two fixes are smaller and more obvious" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: zfcp: Fix a double put in zfcp_port_enqueue() scsi: fnic: Fix sg_reset success path scsi: target: core: Fix deadlock due to recursive locking
2023-10-03net: nfc: llcp: Add lock when modifying device listJeremy Cline1-0/+2
The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered. Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=c1d0a03d305972dbbe14 Signed-off-by: Jeremy Cline <[email protected]> Reviewed-by: Simon Horman <[email protected]> Fixes: 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-03ethtool: plca: fix plca enable data type while parsing the valueParthiban Veerasooran1-16/+29
The ETHTOOL_A_PLCA_ENABLED data type is u8. But while parsing the value from the attribute, nla_get_u32() is used in the plca_update_sint() function instead of nla_get_u8(). So plca_cfg.enabled variable is updated with some garbage value instead of 0 or 1 and always enables plca even though plca is disabled through ethtool application. This bug has been fixed by parsing the values based on the attributes type in the policy. Fixes: 8580e16c28f3 ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by: Parthiban Veerasooran <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-03qed/red_ll2: Fix undefined behavior bug in struct qed_ll2_infoGustavo A. R. Silva1-1/+1
The flexible structure (a structure that contains a flexible-array member at the end) `qed_ll2_tx_packet` is nested within the second layer of `struct qed_ll2_info`: struct qed_ll2_tx_packet { ... /* Flexible Array of bds_set determined by max_bds_per_packet */ struct { struct core_tx_bd *txq_bd; dma_addr_t tx_frag; u16 frag_len; } bds_set[]; }; struct qed_ll2_tx_queue { ... struct qed_ll2_tx_packet cur_completing_packet; }; struct qed_ll2_info { ... struct qed_ll2_tx_queue tx_queue; struct qed_ll2_cbs cbs; }; The problem is that member `cbs` in `struct qed_ll2_info` is placed just after an object of type `struct qed_ll2_tx_queue`, which is in itself an implicit flexible structure, which by definition ends in a flexible array member, in this case `bds_set`. This causes an undefined behavior bug at run-time when dynamic memory is allocated for `bds_set`, which could lead to a serious issue if `cbs` in `struct qed_ll2_info` is overwritten by the contents of `bds_set`. Notice that the type of `cbs` is a structure full of function pointers (and a cookie :) ): include/linux/qed/qed_ll2_if.h: 107 typedef 108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt, 109 struct qed_ll2_comp_rx_data *data); 110 111 typedef 112 void (*qed_ll2_release_rx_packet_cb)(void *cxt, 113 u8 connection_handle, 114 void *cookie, 115 dma_addr_t rx_buf_addr, 116 bool b_last_packet); 117 118 typedef 119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt, 120 u8 connection_handle, 121 void *cookie, 122 dma_addr_t first_frag_addr, 123 bool b_last_fragment, 124 bool b_last_packet); 125 126 typedef 127 void (*qed_ll2_release_tx_packet_cb)(void *cxt, 128 u8 connection_handle, 129 void *cookie, 130 dma_addr_t first_frag_addr, 131 bool b_last_fragment, bool b_last_packet); 132 133 typedef 134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle, 135 u32 opaque_data_0, u32 opaque_data_1); 136 137 struct qed_ll2_cbs { 138 qed_ll2_complete_rx_packet_cb rx_comp_cb; 139 qed_ll2_release_rx_packet_cb rx_release_cb; 140 qed_ll2_complete_tx_packet_cb tx_comp_cb; 141 qed_ll2_release_tx_packet_cb tx_release_cb; 142 qed_ll2_slowpath_cb slowpath_cb; 143 void *cookie; 144 }; Fix this by moving the declaration of `cbs` to the middle of its containing structure `qed_ll2_info`, preventing it from being overwritten by the contents of `bds_set` at run-time. This bug was introduced in 2017, when `bds_set` was converted to a one-element array, and started to be used as a Variable Length Object (VLO) at run-time. Fixes: f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet") Cc: [email protected] Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/ZQ+Nz8DfPg56pIzr@work Signed-off-by: Paolo Abeni <[email protected]>
2023-10-03net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_regShigeru Yoshida1-1/+3
syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6966546b78d050bb0b5d Signed-off-by: Shigeru Yoshida <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-03ipv6: tcp: add a missing nf_reset_ct() in 3WHS handlingIlya Maximets1-3/+7
Commit b0e214d21203 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") is a direct copy of the old commit b59c270104f0 ("[NETFILTER]: Keep conntrack reference until IPsec policy checks are done") but for IPv6. However, it also copies a bug that this old commit had. That is: when the third packet of 3WHS connection establishment contains payload, it is added into socket receive queue without the XFRM check and the drop of connection tracking context. That leads to nf_conntrack module being impossible to unload as it waits for all the conntrack references to be dropped while the packet release is deferred in per-cpu cache indefinitely, if not consumed by the application. The issue for IPv4 was fixed in commit 6f0012e35160 ("tcp: add a missing nf_reset_ct() in 3WHS handling") by adding a missing XFRM check and correctly dropping the conntrack context. However, the issue was introduced to IPv6 code afterwards. Fixing it the same way for IPv6 now. Fixes: b0e214d21203 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Ilya Maximets <[email protected]> Acked-by: Florian Westphal <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-03ipv4/fib: send notify when delete source address routesHangbin Liu3-0/+6
After deleting an interface address in fib_del_ifaddr(), the function scans the fib_info list for stray entries and calls fib_flush() and fib_table_flush(). Then the stray entries will be deleted silently and no RTM_DELROUTE notification will be sent. This lack of notification can make routing daemons, or monitor like `ip monitor route` miss the routing changes. e.g. + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 192.168.5.5/24 dev dummy1 + ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5 + ip -4 route 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 As Ido reminded, fib_table_flush() isn't only called when an address is deleted, but also when an interface is deleted or put down. The lack of notification in these cases is deliberate. And commit 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down") introduced a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send the route delete notify blindly in fib_table_flush(). To fix this issue, let's add a new flag in "struct fib_info" to track the deleted prefer source address routes, and only send notify for them. After update: + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 Suggested-by: Thomas Haller <[email protected]> Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Nicolas Dichtel <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-03ovl: fix NULL pointer defer when encoding non-decodable lower fidAmir Goldstein1-1/+1
A wrong return value from ovl_check_encode_origin() would cause ovl_dentry_to_fid() to try to encode fid from NULL upper dentry. Reported-by: [email protected] Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") Signed-off-by: Amir Goldstein <[email protected]>
2023-10-02Merge tag 'ubifs-for-linus-6.6-rc5' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI fix from Richard Weinberger: - Don't try to attach MTDs with erase block size 0 * tag 'ubifs-for-linus-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Refuse attaching if mtd's erasesize is 0
2023-10-02Merge tag 'libnvdimm-fixes-6.6-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dave Jiang: - Fix incorrect calculation of idt size in NFIT * tag 'libnvdimm-fixes-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ACPI: NFIT: Fix incorrect calculation of idt size
2023-10-02Merge tag 'iommu-fixes-v6.6-rc4' of ↵Linus Torvalds7-32/+33
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Arm SMMU fixes from Will Deacon: - Fix TLB range command encoding when TTL, Num and Scale are all zero - Fix soft lockup by limiting TLB invalidation ops issued by SVA - Fix clocks description for SDM630 platform in arm-smmu DT binding - Intel VT-d fix from Lu Baolu: - Fix a suspend/hibernation problem in iommu_suspend() - Mediatek driver: Fix page table sharing for addresses over 4GiB - Apple/Dart: DMA_FQ handling fix in attach_dev() * tag 'iommu-fixes-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Avoid memory allocation in iommu_suspend() iommu/apple-dart: Handle DMA_FQ domains in attach_dev() iommu/mediatek: Fix share pgtable for iova over 4GB iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range dt-bindings: arm-smmu: Fix SDM630 clocks description iommu/arm-smmu-v3: Avoid constructing invalid range commands
2023-10-02ovl: make use of ->layers safe in rcu pathwalkAmir Goldstein3-24/+21
ovl_permission() accesses ->layers[...].mnt; we can't have ->layers freed without an RCU delay on fs shutdown. Fortunately, kern_unmount_array() that is used to drop those mounts does include an RCU delay, so freeing is delayed; unfortunately, the array passed to kern_unmount_array() is formed by mangling ->layers contents and that happens without any delays. The ->layers[...].name string entries are used to store the strings to display in "lowerdir=..." by ovl_show_options(). Those entries are not accessed in RCU walk. Move the name strings into a separate array ofs->config.lowerdirs and reuse the ofs->config.lowerdirs array as the temporary mount array to pass to kern_unmount_array(). Reported-by: Al Viro <[email protected]> Link: https://lore.kernel.org/r/20231002023711.GP3389589@ZenIV/ Acked-by: Miklos Szeredi <[email protected]> Signed-off-by: Amir Goldstein <[email protected]>
2023-10-02ovl: fetch inode once in ovl_dentry_revalidate_common()Al Viro1-2/+4
d_inode_rcu() is right - we might be in rcu pathwalk; however, OVL_E() hides plain d_inode() on the same dentry... Fixes: a6ff2bc0be17 ("ovl: use OVL_E() and OVL_E_FLAGS() accessors") Signed-off-by: Al Viro <[email protected]> Signed-off-by: Amir Goldstein <[email protected]>
2023-10-02ovl: move freeing ovl_entry past rcu delayAl Viro1-1/+2
... into ->free_inode(), that is. Fixes: 0af950f57fef "ovl: move ovl_entry into ovl_inode" Signed-off-by: Al Viro <[email protected]> Signed-off-by: Amir Goldstein <[email protected]>
2023-10-02ovl: fix file reference leak when submitting aioAmir Goldstein1-2/+0
Commit 724768a39374 ("ovl: fix incorrect fdput() on aio completion") took a refcount on real file before submitting aio, but forgot to avoid clearing FDPUT_FPUT from real.flags stack variable. This can result in a file reference leak. Fixes: 724768a39374 ("ovl: fix incorrect fdput() on aio completion") Reported-by: Gil Lev <[email protected]> Signed-off-by: Amir Goldstein <[email protected]>
2023-10-02sky2: Make sure there is at least one frag_addr availableKees Cook1-1/+1
In the pathological case of building sky2 with 16k PAGE_SIZE, the frag_addr[] array would never be used, so the original code was correct that size should be 0. But the compiler now gets upset with 0 size arrays in places where it hasn't eliminated the code that might access such an array (it can't figure out that in this case an rx skb with fragments would never be created). To keep the compiler happy, make sure there is at least 1 frag_addr in struct rx_ring_info: In file included from include/linux/skbuff.h:28, from include/net/net_namespace.h:43, from include/linux/netdevice.h:38, from drivers/net/ethernet/marvell/sky2.c:18: drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb': include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=] 416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page' 1257 | dma_unmap_page(&pdev->dev, re->frag_addr[i], | ^~~~~~~~~~~~~~ In file included from drivers/net/ethernet/marvell/sky2.c:41: drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr' 2198 | dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT]; | ^~~~~~~~~ With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so: #define ETH_JUMBO_MTU 9000 causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning. Cc: Mirko Lindner <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-02net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absentFabio Estevam5-35/+6
Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") the following error is seen on a imx8mn board with a 88E6320 switch: mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done This board does not have an EEPROM attached to the switch though. This problem is well explained by Andrew Lunn: "If there is an EEPROM, and the EEPROM contains a lot of data, it could be that when we perform a hardware reset towards the end of probe, it interrupts an I2C bus transaction, leaving the I2C bus in a bad state, and future reads of the EEPROM do not work. The work around for this was to poll the EEInt status and wait for it to go true before performing the hardware reset. However, we have discovered that for some boards which do not have an EEPROM, EEInt never indicates complete. As a result, mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a warning. We probably need a different solution than calling mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the EEPROM Command register: bit 15 is: EEPROM Unit Busy. This bit must be set to a one to start an EEPROM operation (see EEOp below). Only one EEPROM operation can be executing at one time so this bit must be zero before setting it to a one. When the requested EEPROM operation completes this bit will automatically be cleared to a zero. The transition of this bit from a one to a zero can be used to generate an interrupt (the EEInt in Global 1, offset 0x00). and more interesting is bit 11: Register Loader Running. This bit is set to one whenever the register loader is busy executing instructions contained in the EEPROM." Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error when the EEPROM chip is not present. Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") Suggested-by: Andrew Lunn <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-02ptp: ocp: Fix error handling in ptp_ocp_device_initDinghao Liu1-1/+0
When device_add() fails, ptp_ocp_dev_release() will be called after put_device(). Therefore, it seems that the ptp_ocp_dev_release() before put_device() is redundant. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dinghao Liu <[email protected]> Reviewed-by: Vadim Feodrenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01Linux 6.6-rc4Linus Torvalds1-1/+1
2023-10-01Merge tag 'kbuild-fixes-v6.6-2' of ↵Linus Torvalds7-15/+41
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the module compression with xz so the in-kernel decompressor works - Document a kconfig idiom to express an optional dependency between modules - Make modpost, when W=1 is given, detect broken drivers that reference .exit.* sections - Remove unused code * tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove stale code for 'source' symlink in packaging scripts modpost: Don't let "driver"s reference .exit.* vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros modpost: add missing else to the "of" check Documentation: kbuild: explain handling optional dependencies kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
2023-10-01Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of ↵Linus Torvalds38-169/+455
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
2023-10-01Merge tag 'char-misc-6.6-rc4' of ↵Linus Torvalds6-212/+102
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single, much requested, fix for a set of misc drivers to resolve a much reported regression in the -rc series that has also propagated back to the stable releases. Sorry for the delay, lots of conference travel for a few weeks put me very far behind in patch wrangling. It has been reported by many to resolve the reported problem, and has been in linux-next with no reported issues" * tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
2023-10-01Merge tag 'tty-6.6-rc4' of ↵Linus Torvalds2-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver fixes from Greg KH: "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some reported regressions: - revert a n_gsm change that ended up causing problems - 8250_port fix for irq data both have been in linux-next for over a week with no reported problems" * tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" serial: 8250_port: Check IRQ data before use
2023-10-01net: prevent address rewrite in kernel_bind()Jordan Rife4-5/+10
Similar to the change in commit 0bdf399342c5("net: Avoid address overwrite in kernel_connect"), BPF hooks run on bind may rewrite the address passed to kernel_bind(). This change 1) Makes a copy of the bind address in kernel_bind() to insulate callers. 2) Replaces direct calls to sock->ops->bind() in net with kernel_bind() Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind") Cc: [email protected] Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Jordan Rife <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01net: prevent rewrite of msg_name in sock_sendmsg()Jordan Rife1-6/+23
Callers of sock_sendmsg(), and similarly kernel_sendmsg(), in kernel space may observe their value of msg_name change in cases where BPF sendmsg hooks rewrite the send address. This has been confirmed to break NFS mounts running in UDP mode and has the potential to break other systems. This patch: 1) Creates a new function called __sock_sendmsg() with same logic as the old sock_sendmsg() function. 2) Replaces calls to sock_sendmsg() made by __sys_sendto() and __sys_sendmsg() with __sock_sendmsg() to avoid an unnecessary copy, as these system calls are already protected. 3) Modifies sock_sendmsg() so that it makes a copy of msg_name if present before passing it down the stack to insulate callers from changes to the send address. Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Cc: [email protected] Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Jordan Rife <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01net: replace calls to sock->ops->connect() with kernel_connect()Jordan Rife2-3/+3
commit 0bdf399342c5 ("net: Avoid address overwrite in kernel_connect") ensured that kernel_connect() will not overwrite the address parameter in cases where BPF connect hooks perform an address rewrite. This change replaces direct calls to sock->ops->connect() in net with kernel_connect() to make these call safe. Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect") Cc: [email protected] Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: Jordan Rife <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()David Howells1-1/+1
Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself. Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Reported-by: [email protected] Link: https://lore.kernel.org/r/[email protected]/ Suggested-by: Willem de Bruijn <[email protected]> Signed-off-by: David Howells <[email protected]> cc: Eric Dumazet <[email protected]> cc: Willem de Bruijn <[email protected]> cc: "David S. Miller" <[email protected]> cc: David Ahern <[email protected]> cc: Paolo Abeni <[email protected]> cc: Jakub Kicinski <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01Merge tag 'x86-urgent-2023-10-01' of ↵Linus Torvalds3-7/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for AMD-derived Hygon processors, and fix a SGX kernel crash in the page fault handler that can trigger when ksgxd races to reclaim the SECS special page, by making the SECS page unswappable" * tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race x86/srso: Add SRSO mitigation for Hygon processors x86/kgdb: Fix a kerneldoc warning when build with W=1
2023-10-01Merge tag 'timers-urgent-2023-10-01' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe
2023-10-01Merge tag 'sched-urgent-2023-10-01' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a RT tasks related lockup/live-lock during CPU offlining" * tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix live lock between select_fallback_rq() and RT push
2023-10-01Merge tag 'perf-urgent-2023-10-01' of ↵Linus Torvalds1-7/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fixes from Ingo Molnar: "Misc fixes: work around an AMD microcode bug on certain models, and fix kexec kernel PMI handlers on AMD systems that get loaded on older kernels that have an unexpected register state" * tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Do not WARN() on every IRQ perf/x86/amd/core: Fix overflow reset on hotplug
2023-10-01neighbour: fix data-races around n->outputEric Dumazet3-7/+7
n->output field can be read locklessly, while a writer might change the pointer concurrently. Add missing annotations to prevent load-store tearing. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01net: fix possible store tearing in neigh_periodic_work()Eric Dumazet1-1/+3
While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev(). Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01kbuild: remove stale code for 'source' symlink in packaging scriptsMasahiro Yamada2-4/+0
Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"), modules_install does not create the 'source' symlink. Remove the stale code from builddeb and kernel.spec. Signed-off-by: Masahiro Yamada <[email protected]>
2023-10-01Merge tag 'for-net-2023-09-20' of ↵David S. Miller8-46/+60
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth bluetooth pull request for net: - Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - Fix handling of listen for ISO unicast - Fix build warnings - Fix leaking content of local_codecs - Add shutdown function for QCA6174 - Delete unused hci_req_prepare_suspend() declaration - Fix hci_link_tx_to RCU lock usage - Avoid redundant authentication Signed-off-by: David S. Miller <[email protected]>
2023-10-01net: stmmac: platform: fix the incorrect parameterClark Wang1-1/+1
The second parameter of stmmac_pltfr_init() needs the pointer of "struct plat_stmmacenet_data". So, correct the parameter typo when calling the function. Otherwise, it may cause this alignment exception when doing suspend/resume. [ 49.067201] CPU1 is up [ 49.135258] Internal error: SP/PC alignment exception: 000000008a000000 [#1] PREEMPT SMP [ 49.143346] Modules linked in: soc_imx9 crct10dif_ce polyval_ce nvmem_imx_ocotp_fsb_s400 polyval_generic layerscape_edac_mod snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_imx_card snd_soc_wm8962 el_enclave snd_soc_fsl_micfil rtc_pcf2127 rtc_pcf2131 flexcan can_dev snd_soc_fsl_xcvr snd_soc_fsl_sai imx8_media_dev(C) snd_soc_fsl_utils fuse [ 49.173393] CPU: 0 PID: 565 Comm: sh Tainted: G C 6.5.0-rc4-next-20230804-05047-g5781a6249dae #677 [ 49.183721] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 49.189190] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 49.196140] pc : 0x80800052 [ 49.198931] lr : stmmac_pltfr_resume+0x34/0x50 [ 49.203368] sp : ffff800082f8bab0 [ 49.206670] x29: ffff800082f8bab0 x28: ffff0000047d0ec0 x27: ffff80008186c170 [ 49.213794] x26: 0000000b5e4ff1ba x25: ffff800081e5fa74 x24: 0000000000000010 [ 49.220918] x23: ffff800081fe0000 x22: 0000000000000000 x21: 0000000000000000 [ 49.228042] x20: ffff0000001b4010 x19: ffff0000001b4010 x18: 0000000000000006 [ 49.235166] x17: ffff7ffffe007000 x16: ffff800080000000 x15: 0000000000000000 [ 49.242290] x14: 00000000000000fc x13: 0000000000000000 x12: 0000000000000000 [ 49.249414] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff800082f8b8c0 [ 49.256538] x8 : 0000000000000008 x7 : 0000000000000001 x6 : 000000005f54a200 [ 49.263662] x5 : 0000000001000000 x4 : ffff800081b93680 x3 : ffff800081519be0 [ 49.270786] x2 : 0000000080800052 x1 : 0000000000000000 x0 : ffff0000001b4000 [ 49.277911] Call trace: [ 49.280346] 0x80800052 [ 49.282781] platform_pm_resume+0x2c/0x68 [ 49.286785] dpm_run_callback.constprop.0+0x74/0x134 [ 49.291742] device_resume+0x88/0x194 [ 49.295391] dpm_resume+0x10c/0x230 [ 49.298866] dpm_resume_end+0x18/0x30 [ 49.302515] suspend_devices_and_enter+0x2b8/0x624 [ 49.307299] pm_suspend+0x1fc/0x348 [ 49.310774] state_store+0x80/0x104 [ 49.314258] kobj_attr_store+0x18/0x2c [ 49.318002] sysfs_kf_write+0x44/0x54 [ 49.321659] kernfs_fop_write_iter+0x120/0x1ec [ 49.326088] vfs_write+0x1bc/0x300 [ 49.329485] ksys_write+0x70/0x104 [ 49.332874] __arm64_sys_write+0x1c/0x28 [ 49.336783] invoke_syscall+0x48/0x114 [ 49.340527] el0_svc_common.constprop.0+0xc4/0xe4 [ 49.345224] do_el0_svc+0x38/0x98 [ 49.348526] el0_svc+0x2c/0x84 [ 49.351568] el0t_64_sync_handler+0x100/0x12c [ 49.355910] el0t_64_sync+0x190/0x194 [ 49.359567] Code: ???????? ???????? ???????? ???????? (????????) [ 49.365644] ---[ end trace 0000000000000000 ]--- Fixes: 97117eb51ec8 ("net: stmmac: platform: provide stmmac_pltfr_init()") Signed-off-by: Clark Wang <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Serge Semin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-01modpost: Don't let "driver"s reference .exit.*Uwe Kleine-König1-2/+13
Drivers must not reference functions marked with __exit as these likely are not available when the code is built-in. There are few creative offenders uncovered for example in ARCH=amd64 allmodconfig builds. So only trigger the section mismatch warning for W=1 builds. The dual rule that drivers must not reference .init.* is implemented since commit 0db252452378 ("modpost: don't allow *driver to reference .init.*") which however missed that .exit.* should be handled in the same way. Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to find this improvement. Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2023-10-01vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macrosMasahiro Yamada1-7/+0
Remove the left-over of commit e24f6628811e ("modpost: remove all traces of cpuinit/cpuexit sections"). Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Paul Gortmaker <[email protected]>
2023-10-01modpost: add missing else to the "of" checkMauricio Faria de Oliveira1-1/+1
Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by: Mauricio Faria de Oliveira <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2023-09-30Merge tag 'soc-fixes-6.6' of ↵Linus Torvalds29-90/+179
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the latest bug fixes that have come up in the soc tree. Most of these are fairly minor. Most notably, the majority of changes this time are not for dts files as usual. - Updates to the addresses of the broadcom and aspeed entries in the MAINTAINERS file. - Defconfig updates to address a regression on samsung and a build warning from an unknown Kconfig symbol - Build fixes for the StrongARM and Uniphier platforms - Code fixes for SCMI and FF-A firmware drivers, both of which had a simple bug that resulted in invalid data, and a lesser fix for the optee firmware driver - Multiple fixes for the recently added loongson/loongarch "guts" soc driver - Devicetree fixes for RISC-V on the startfive platform, addressing issues with NOR flash, usb and uart. - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with clock, gpio, hdmi settings and the Makefile - Bug fixes for i.MX firmware code and the OCOTP soc driver - Multiple fixes for the TI sysc bus driver - Minor dts updates for TI omap dts files, to address boot time warnings and errors" * tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) MAINTAINERS: Fix Florian Fainelli's email address arm64: defconfig: enable syscon-poweroff driver ARM: locomo: fix locomolcd_power declaration soc: loongson: loongson2_guts: Remove unneeded semicolon soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() soc: loongson: loongson_pm2: Populate children syscon nodes dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child soc: loongson: loongson_pm2: Drop useless of_device_id compatible dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible soc: loongson: loongson_pm2: Add dependency for INPUT arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y ARM: uniphier: fix cache kernel-doc warnings MAINTAINERS: aspeed: Update Andrew's email address MAINTAINERS: aspeed: Update git tree URL firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND arm64: dts: imx: Add imx8mm-prt8mm.dtb to build arm64: dts: imx8mm-evk: Fix hdmi@3d node soc: imx8m: Enable OCOTP clock for imx8mm before reading registers arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock arm64: dts: imx8mp: Fix SDMA2/3 clocks ...
2023-09-30Merge tag 'trace-v6.6-rc3' of ↵Linus Torvalds4-8/+56
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Make sure 32-bit applications using user events have aligned access when running on a 64-bit kernel. - Add cond_resched in the loop that handles converting enums in print_fmt string is trace events. - Fix premature wake ups of polling processes in the tracing ring buffer. When a task polls waiting for a percentage of the ring buffer to be filled, the writer still will wake it up at every event. Add the polling's percentage to the "shortest_full" list to tell the writer when to wake it up. - For eventfs dir lookups on dynamic events, an event system's only event could be removed, leaving its dentry with no children. This is totally legitimate. But in eventfs_release() it must not access the children array, as it is only allocated when the dentry has children. * tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Test for dentries array allocated in eventfs_release() tracing/user_events: Align set_bit() address for all archs tracing: relax trace_event_eval_update() execution with cond_resched() ring-buffer: Update "shortest_full" in polling
2023-09-30eventfs: Test for dentries array allocated in eventfs_release()Steven Rostedt (Google)1-1/+1
The dcache_dir_open_wrapper() could be called when a dynamic event is being deleted leaving a dentry with no children. In this case the dlist->dentries array will never be allocated. This needs to be checked for in eventfs_release(), otherwise it will trigger a NULL pointer dereference. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Mark Rutland <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Fixes: ef36b4f92868 ("eventfs: Remember what dentries were created on dir open") Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-09-30tracing/user_events: Align set_bit() address for all archsBeau Belgrave1-7/+51
All architectures should use a long aligned address passed to set_bit(). User processes can pass either a 32-bit or 64-bit sized value to be updated when tracing is enabled when on a 64-bit kernel. Both cases are ensured to be naturally aligned, however, that is not enough. The address must be long aligned without affecting checks on the value within the user process which require different adjustments for the bit for little and big endian CPUs. Add a compat flag to user_event_enabler that indicates when a 32-bit value is being used on a 64-bit kernel. Long align addresses and correct the bit to be used by set_bit() to account for this alignment. Ensure compat flags are copied during forks and used during deletion clears. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/ Cc: [email protected] Fixes: 7235759084a4 ("tracing/user_events: Use remote writes for event enablement") Reported-by: Clément Léger <[email protected]> Suggested-by: Clément Léger <[email protected]> Signed-off-by: Beau Belgrave <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-09-30tracing: relax trace_event_eval_update() execution with cond_resched()Clément Léger1-0/+1
When kernel is compiled without preemption, the eval_map_work_func() (which calls trace_event_eval_update()) will not be preempted up to its complete execution. This can actually cause a problem since if another CPU call stop_machine(), the call will have to wait for the eval_map_work_func() function to finish executing in the workqueue before being able to be scheduled. This problem was observe on a SMP system at boot time, when the CPU calling the initcalls executed clocksource_done_booting() which in the end calls stop_machine(). We observed a 1 second delay because one CPU was executing eval_map_work_func() and was not preempted by the stop_machine() task. Adding a call to cond_resched() in trace_event_eval_update() allows other tasks to be executed and thus continue working asynchronously like before without blocking any pending task at boot time. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Masami Hiramatsu <[email protected]> Signed-off-by: Clément Léger <[email protected]> Tested-by: Atish Patra <[email protected]> Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-09-30ring-buffer: Update "shortest_full" in pollingSteven Rostedt (Google)1-0/+3
It was discovered that the ring buffer polling was incorrectly stating that read would not block, but that's because polling did not take into account that reads will block if the "buffer-percent" was set. Instead, the ring buffer polling would say reads would not block if there was any data in the ring buffer. This was incorrect behavior from a user space point of view. This was fixed by commit 42fb0a1e84ff by having the polling code check if the ring buffer had more data than what the user specified "buffer percent" had. The problem now is that the polling code did not register itself to the writer that it wanted to wait for a specific "full" value of the ring buffer. The result was that the writer would wake the polling waiter whenever there was a new event. The polling waiter would then wake up, see that there's not enough data in the ring buffer to notify user space and then go back to sleep. The next event would wake it up again. Before the polling fix was added, the code would wake up around 100 times for a hackbench 30 benchmark. After the "fix", due to the constant waking of the writer, it would wake up over 11,0000 times! It would never leave the kernel, so the user space behavior was still "correct", but this definitely is not the desired effect. To fix this, have the polling code add what it's waiting for to the "shortest_full" variable, to tell the writer not to wake it up if the buffer is not as full as it expects to be. Note, after this fix, it appears that the waiter is now woken up around 2x the times it was before (~200). This is a tremendous improvement from the 11,000 times, but I will need to spend some time to see why polling is more aggressive in its wakeups than the read blocking code. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mark Rutland <[email protected]> Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark") Reported-by: Julia Lawall <[email protected]> Tested-by: Julia Lawall <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-09-30Merge tag 'dma-mapping-6.6-2023-09-30' of ↵Linus Torvalds2-16/+38
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas
2023-09-30Merge tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2-2/+11
Pull iomap fixes from Darrick Wong: - Handle a race between writing and shrinking block devices by returning EIO - Fix a typo in a comment * tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Spelling s/preceeding/preceding/g iomap: add a workaround for racy i_size updates on block devices
2023-09-30Merge tag 'i2c-for-6.6-rc4' of ↵Linus Torvalds3-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Usual business: a driver fix, a DT fix, a minor core fix" * tag 'i2c-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: npcm7xx: Fix callback completion ordering i2c: mux: Avoid potential false error message in i2c_mux_add_adapter dt-bindings: i2c: mxs: Pass ref and 'unevaluatedProperties: false'
Powered by cgit, Gruvboxed by Blaster4385.