aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-05-16arm64: dts: renesas: r8a77990: Add EthernetAVB device nodesYoshihiro Shimoda1-0/+45
This patch adds EthernetAVB node for r8a77990 (R-Car E3). Based on a patch from Takeshi Kihara <[email protected]> Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77990: Add GPIO device nodesYoshihiro Shimoda1-0/+105
This patch adds GPIO nodes for r8a77990 (R-Car E3). Based on a patch from Takeshi Kihara <[email protected]> Signed-off-by: Yoshihiro Shimoda <[email protected]> [simon: dropped use of deprecated "renesas,gpio-rcar"] Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77990: Add PFC device nodeYoshihiro Shimoda1-0/+5
This patch adds PFC device node for r8a77990 (R-Car E3). Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: initial V3HSK board device treeSergei Shtylyov2-1/+61
Add the initial device tree for the V3H Starter Kit board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <[email protected]> Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77980: disable EtherAVBSergei Shtylyov1-0/+1
When adding the R8A77980 EtherAVB device I failed to notice that it does not have the usual "status" property disabling the described devices in anticipation that the board device trees enable the devices according to their needs. This causes the EtherAVB driver to successfully probe despite e.g. the needed pins not having been configured -- luckily, "eth<n>" device can't be opened anyway... Fixes: bf6f90832f81 ("arm64: dts: renesas: r8a77980: add EtherAVB support") Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77970: disable EtherAVBSergei Shtylyov1-0/+1
When adding the R8A77970 EtherAVB device I failed to notice that it does not have the usual "status" property disabling the described devices in anticipation that the board device trees enable the devices according to their needs. This causes the EtherAVB driver to successfully probe despite e.g. the needed pins not having been configured -- luckily, "eth<n>" device can't be opened anyway... Fixes: bea2ab136eaa ("arm64: dts: renesas: r8a77970: add EtherAVB support") Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77995: Add VIN4Jacopo Mondi1-0/+11
Describe VIN4 interface for R-Car D3 R8A77995 SoC. Signed-off-by: Jacopo Mondi <[email protected]> Acked-by: Niklas Söderlund <[email protected]> [simon: sorted node by bus address] Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]>
2018-05-16arm64: dts: renesas: r8a77980: add resets property to CAN-FD nodeSimon Horman1-0/+1
Add resets property to CAN-FD node to describe it in the reset topology of on-SoC devices. This allows to reset the CAN-FD device using the Reset Controller API. Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]>
2018-05-16arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU nodeGeert Uytterhoeven1-0/+7
Enable the performance monitor unit for the Cortex-A53 cores on the R-Car V3M (r8a77970) SoC. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77970: Add secondary CA53 CPU coreGeert Uytterhoeven1-5/+15
Add a device node for the second Cortex-A53 CPU core on the Renesas R-Car V3M (r8a77970) SoC, and adjust the interrupt delivery masks for ARM Generic Interrupt Controller and Architectured Timer. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Add SDHI device nodesTakeshi Kihara1-4/+32
Add SDHI nodes to the DT of the r8a77965 SoC. Based on several similar patches of the R8A7796 device tree by Simon Horman <[email protected]>. Signed-off-by: Takeshi Kihara <[email protected]> Signed-off-by: Yoshihiro Kaneko <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: ulcb: Add PMIC DDR Backup Power configGeert Uytterhoeven1-0/+2
On the R-Car Starter Kit Premier/Pro, all of the DDR0, DDR1, DDR0C, and DDR1C power rails need to be kept powered when backup mode is enabled. Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. The accessory power switch (SW8) is a momentary switch, hense specify "rohm,rstbmode-pulse". Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: salvator-common: Add PMIC DDR Backup Power configGeert Uytterhoeven1-0/+2
On Salvator-X(S), all of the DDR0, DDR1, DDR0C, and DDR1C power rails need to be kept powered when backup mode is enabled. Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. The accessory power switch (SW23) is a toggle switch, hence specify "rohm,rstbmode-level". Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: ulcb: Add BD9571 PMICGeert Uytterhoeven1-0/+29
Add a device node for the ROHM BD9571MWV PMIC. This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Correct whitespaceGeert Uytterhoeven1-1/+1
Add missing space after comma. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7796: Correct whitespaceGeert Uytterhoeven1-4/+4
Add missing spaces after commas. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795: Correct whitespaceGeert Uytterhoeven1-7/+7
Add missing spaces after commas. Replace 8 consecutive spaces by a TAB. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795: salvator-xs: enable USB2.0 host channel 3Yoshihiro Shimoda1-0/+10
This patch enables USB2.0 host channel 3 for r8a7795 with Salvator-XS. Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795: salvator-xs: enable hsusb channel 3 nodeYoshihiro Shimoda1-0/+5
This patch enables HS-USB channel3 node for r8a7795 with Salvator-XS. Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795: salvator-xs: enable usb2_phy3 nodeYoshihiro Shimoda1-0/+24
This patch enables usb2_phy3 node for r8a7795 with Salvator-XS. You must change the SW31 to OFF-OFF-ON-ON-ON-ON on the board. Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: salvator-common: add eepromWolfram Sang1-0/+6
Add the EEPROM found on Salvator-X and -XS boards for H3, M3-W, and M3-N on the IIC_DVFS bus. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: condor: add CAN-FD supportSergei Shtylyov1-0/+15
Define the Condor board dependent part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <[email protected]> Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77980: add CAN-FD supportSergei Shtylyov1-0/+31
Define the generic R8A77980 part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <[email protected]> Signed-off-by: Sergei Shtylyov <[email protected]> [simon: consistently use tabs for indentation] Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: eagle: add CAN-FD supportSergei Shtylyov1-0/+15
Define the Eagle board dependent part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <[email protected]> Signed-off-by: Sergei Shtylyov <[email protected]> Acked-by: Ramesh Shanmugasundaram <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77970: add CAN-FD supportSergei Shtylyov1-0/+32
Define the generic R8A77970 part of the CAN-FD device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <[email protected]> Signed-off-by: Sergei Shtylyov <[email protected]> Acked-by: Ramesh Shanmugasundaram <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal supportNiklas Söderlund1-0/+59
Based on previous work by Ryo Kataoka <[email protected]>. Signed-off-by: Niklas Söderlund <[email protected]> [simon: moved thermal node to preseve ordering of nodes by bus address] Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: use r8a77965-sysc binding definitionsNiklas Söderlund1-47/+47
Replace the hardcoded power domain indices by R8A77965_PD_* symbols. Signed-off-by: Niklas Söderlund <[email protected]> Reviewed-by: Jacopo Mondi <[email protected]> [simon: dropped hunk to include r8a77965-sysc.h which is already present] Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77980: use SYSC power domain macrosSergei Shtylyov1-15/+16
Now that the commit 7755b40d07a8 ("dt-bindings: power: add R8A77980 SYSC power domain definitions") has hit Linus' tree, we can replace the bare numbers (we had to use to avoid a cross tree dependency) with these macro definitions... Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77980: use CPG core clock macrosSergei Shtylyov1-10/+10
Now that the commit 35b3c462dae1 ("dt-bindings: clock: add R8A77980 CPG core clock definitions") has hit Linus' tree, we can replace the bare numbers (we had to use to avoid a cross tree dependency) with these macro definitions... Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Add address properties to rcar_sound port nodesSimon Horman1-0/+8
The rcar_sound port nodes have unit names and thus should have register properties. This is flagged by dtc as follows: # make dtbs W=1 ... DTC arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property DTC arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property Prior to this patch the port nodes only defined in board DTS files. As the register properties are common this patch defines the port nodes and provides register properties in the SoC DTS file. Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]>
2018-05-16arm64: dts: renesas: r8a7796: Add address properties to rcar_sound port nodesSimon Horman1-0/+11
The rcar_sound port nodes have unit names and thus should have register properties. This is flagged by dtc as follows: # make dtbs W=1 ... DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property ... DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property Prior to this patch the port nodes only defined in board DTS files. As the register properties are common this patch defines the port nodes and provides register properties in the SoC DTS file. Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795: Add address properties to rcar_sound port nodesSimon Horman1-0/+14
The rcar_sound port nodes have unit names and thus should have register properties. This is flagged by dtc as follows: # make dtbs W=1 ... DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property ... DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property DTC arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property Prior to this patch the port nodes only defined in board DTS files. As the register properties are common this patch defines the port nodes and provides register properties in the SoC DTS file. Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]>
2018-05-16arm64: dts: renesas: v3msk: add DU/LVDS/HDMI supportSergei Shtylyov1-0/+129
Define the V3M Starter Kit board dependent part of the DU and LVDS device nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and Analog Devices ADV7511W HDMI transmitter... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <[email protected]> Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: condor: add eMMC supportSergei Shtylyov1-0/+43
Define the Condor board dependent part of the MMC0 (connected to eMMC chip) device node along with the necessary voltage regulators... Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965-salvator-xs: Enable DU external clocks and HDMIKieran Bingham1-0/+28
The DU1 external dot clock is provided by the fixed frequency clock generator X21, while the DU0 and DU3 clocks are provided by the programmable Versaclock6 clock generator. Enable the clocks, and the HDMI encoder for the M3-N Salvator-XS, and hook it up to the HDMI connector Based on patches from Takeshi Kihara <[email protected]> Signed-off-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965-salvator-x: Enable DU external clocks and HDMIKieran Bingham1-0/+28
The DU1 external dot clock is provided by the fixed frequency clock generator X21, while the DU0 and DU3 clocks are provided by the programmable Versaclock5 clock generator. Enable the clocks, and the HDMI encoder for the M3-N Salvator-X board and hook it up to the HDMI connector. Based on patches from Takeshi Kihara <[email protected]> Signed-off-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Add HDMI encoder instanceKieran Bingham1-1/+29
Add the HDMI encoder to the R8A77965 DT in disabled state. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <[email protected]>. Signed-off-by: Takeshi Kihara <[email protected]> [Kieran: Rebase to top of tree] Signed-off-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Populate the DU instance placeholderKieran Bingham1-3/+13
The DU entity node has been previously added but only as a placeholder. Populate the node with the properties to use the device. Signed-off-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Add VSP instancesKieran Bingham1-0/+44
The r8a77965 has 4 VSP instances. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <[email protected]>. Signed-off-by: Takeshi Kihara <[email protected]> [Kieran: Rebased to top of tree, fixed sort orders] Signed-off-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77965: Add FCPF and FCPV instancesKieran Bingham1-0/+41
The FCPs handle the interface between various IP cores and memory. Add the instances related to the FDPs and VSP2s. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <[email protected]>. Signed-off-by: Takeshi Kihara <[email protected]> [Kieran: Rebase to top of tree] Signed-off-by: Kieran Bingham <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77990: Revise the cache controller nodeYoshihiro Shimoda1-2/+1
The cache controller node should not have unit-addresses and reg properties. So, this patch removes them. Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a77990: Revise the psci nodeYoshihiro Shimoda1-1/+1
The basic support patch 9491a8b17530 ("arm64: dts: renesas: Add Renesas R8A77990 SoC support") lacks the compatible "arm,psci-1.0" in the psci node. So, this patch revises it. Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795-es1: Enable IPMMU devicesSimon Horman1-1/+0
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7795 ES1.0 Soc. This is a follow up for a patch by Magnus Damm for the the r8a7795 ES2.0 and other R-Car Gen 3 SoCs. Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7796-salvator-x: enable HDMI soundKuninori Morimoto1-0/+28
Signed-off-by: Kuninori Morimoto <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795-salvator-x: enable HDMI soundKuninori Morimoto1-0/+46
Signed-off-by: Kuninori Morimoto <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7796-salvator-xs: enable HDMI soundKuninori Morimoto1-0/+28
Signed-off-by: Kuninori Morimoto <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795-salvator-xs: enable HDMI soundKuninori Morimoto1-0/+46
Signed-off-by: Kuninori Morimoto <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7795-es1-salvator-x: enable HDMI soundKuninori Morimoto1-0/+46
Signed-off-by: Kuninori Morimoto <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: salvator-common: use audio-graph-card for SoundKuninori Morimoto1-16/+22
Current Sound is using simple-audio-card which can't support HDMI. To use HDMI sound, we need to use audio-graph-card. But, one note is that r8a7795 has 2 HDMI ports, but r8a7796 has 1. Because of this mismatch, supporting HDMI on salvator-common is impossible. Thus, this patch exchange sound card to audio-graph-card and keep supporting ak4613 as 1st sound node. r8a7795/r8a7796 salvator-x{s} need to add HDMI sound individually. Signed-off-by: Kuninori Morimoto <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2018-05-16arm64: dts: renesas: r8a7796: add HDMI sound supportKuninori Morimoto1-0/+4
Signed-off-by: Kuninori Morimoto <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Signed-off-by: Simon Horman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.