| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
allow gfxoff on gc_11_0_3
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Yang Wang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If the number of pages from the userptr BO differs from the SG BO then the
allocated memory for the SG table doesn't get freed before returning
-EINVAL, which may lead to a memory leak in some error paths. Fix this by
checking the number of pages before allocating memory for the SG table.
Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Rafael Mendonca <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
MMHUB 2.1.x versions don't have ATCL2. Remove accesses to ATCL2 registers.
Since they are non-existing registers, read access will cause a
'Completer Abort' and gets reported when AER is enabled with the below patch.
Tagging with the patch so that this is backported along with it.
v2: squash in uninitialized warning fix (Nathan Chancellor)
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
drivers/video/fbdev/sis/init301.c:3549 SiS_GetCRT2Data301() warn: 'SiS_Pr->SiS_EModeIDTable[ModeIdIndex]->ROMMODEIDX661' is unsigned
Cc: Thomas Winischhofer <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
As Shakeel explains the commit under Fixes had the unintended
side-effect of no longer pre-loading the cached memory allowance.
Even tho we previously dropped the first packet received when
over memory limit - the consecutive ones would get thru by using
the cache. The charging was happening in batches of 128kB, so
we'd let in 128kB (truesize) worth of packets per one drop.
After the change we no longer force charge, there will be no
cache filling side effects. This causes significant drops and
connection stalls for workloads which use a lot of page cache,
since we can't reclaim page cache under GFP_NOWAIT.
Some of the latency can be recovered by improving SACK reneg
handling but nowhere near enough to get back to the pre-5.15
performance (the application I'm experimenting with still
sees 5-10x worst latency).
Apply the suggested workaround of using GFP_ATOMIC. We will now
be more permissive than previously as we'll drop _no_ packets
in softirq when under pressure. But I can't think of any good
and simple way to address that within networking.
Link: https://lore.kernel.org/all/[email protected]/
Suggested-by: Shakeel Butt <[email protected]>
Fixes: 4b1327be9fe5 ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()")
Acked-by: Shakeel Butt <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This commit fixes a bug that can cause a TCP data sender to repeatedly
defer RTOs when encountering SACK reneging.
The bug is that when we're in fast recovery in a scenario with SACK
reneging, every time we get an ACK we call tcp_check_sack_reneging()
and it can note the apparent SACK reneging and rearm the RTO timer for
srtt/2 into the future. In some SACK reneging scenarios that can
happen repeatedly until the receive window fills up, at which point
the sender can't send any more, the ACKs stop arriving, and the RTO
fires at srtt/2 after the last ACK. But that can take far too long
(O(10 secs)), since the connection is stuck in fast recovery with a
low cwnd that cannot grow beyond ssthresh, even if more bandwidth is
available.
This fix changes the logic in tcp_check_sack_reneging() to only rearm
the RTO timer if data is cumulatively ACKed, indicating forward
progress. This avoids this kind of nearly infinite loop of RTO timer
re-arming. In addition, this meets the goals of
tcp_check_sack_reneging() in handling Windows TCP behavior that looks
temporarily like SACK reneging but is not really.
Many thanks to Jakub Kicinski and Neil Spring, who reported this issue
and provided critical packet traces that enabled root-causing this
issue. Also, many thanks to Jakub Kicinski for testing this fix.
Fixes: 5ae344c949e7 ("tcp: reduce spurious retransmits due to transient SACK reneging")
Reported-by: Jakub Kicinski <[email protected]>
Reported-by: Neil Spring <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Cc: Yuchung Cheng <[email protected]>
Tested-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2022-10-23
We've added 7 non-merge commits during the last 18 day(s) which contain
a total of 8 files changed, 69 insertions(+), 5 deletions(-).
The main changes are:
1) Wait for busy refill_work when destroying bpf memory allocator, from Hou.
2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David.
3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri.
4) Prevent decl_tag from being referenced in func_proto, from Stanislav.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
bpf: Fix dispatcher patchable function entry to 5 bytes nop
bpf: prevent decl_tag from being referenced in func_proto
selftests/bpf: Add reproducer for decl_tag in func_proto return type
selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1
bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
WRITE_ZEROES requests use TRIM, so mark them as needing to be issued
synchronously even when a CQE is being used. Without this,
mmc_blk_mq_issue_rq() triggers a WARN_ON_ONCE() and fails the request
since we don't have any handling for issuing this asynchronously.
Fixes: f7b6fc327327 ("mmc: core: Support zeroout using TRIM for eMMC")
Reported-by: Jon Hunter <[email protected]>
Tested-by: Jon Hunter <[email protected]>
Signed-off-by: Vincent Whitchurch <[email protected]>
Reviewed-by: Avri Altman <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Chromebooks don't have backlight in ACPI table, they suppose to use
native backlight in this case. Check presence of the CrOS embedded
controller ACPI device and prefer the native backlight if EC found.
Suggested-by: Hans de Goede <[email protected]>
Fixes: 2600bfa3df99 ("ACPI: video: Add acpi_video_backlight_use_native() helper")
Signed-off-by: Dmitry Osipenko <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload.
Fixes: c9c3321257e1 ("tcp: add tcp_add_backlog()")
Signed-off-by: Lu Wei <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The ndo_start_xmit() method must not free skb when returning
NETDEV_TX_BUSY, since caller is going to requeue freed skb.
Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Zhang Changzhong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.
The process is as follows:
setup_net()
ops_init()
data = kzalloc(...) ---> alloc "data"
net_assign_generic() ---> assign "date" to ptr in net->gen
...
ops->init() ---> failed
...
kfree(data); ---> ptr in net->gen is invalid
...
ops_exit_list()
...
nfqnl_nf_hook_drop()
*q = nfnl_queue_pernet(net) ---> q is invalid
The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Allocated by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc+0x49/0xb0
ops_init+0xe7/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
ops_init+0xb9/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: f875bae06533 ("net: Automatically allocate per namespace data.")
Signed-off-by: Zhengchao Shao <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some of us gotten used to producing large quantities of peer feedback
at work, every 3 or 6 months. Extending the same courtesy to community
members seems like a logical step. It may be hard for some folks to
get validation of how important their work is internally, especially
at smaller companies which don't employ many kernel experts.
The concept of "peer feedback" may be a hyperscaler / silicon valley
thing so YMMV. Hopefully we can build more context as we go.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Eric Dumazet says:
====================
kcm: annotate data-races
This series address two different syzbot reports for KCM.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.
syzbot reported:
BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree
write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1:
reserve_rx_kcm net/kcm/kcmsock.c:283 [inline]
kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0:
kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.
We do the same for kcm->rx_wait in the following patch.
syzbot reported:
BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm
write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1:
unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313
kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0:
kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffff88812971ce00 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Before 262f2b782e25 ("net: fman: Map the base address once"), the
physical address of the MAC was exposed to userspace in two places: via
sysfs and via SIOCGIFMAP. While this is not best practice, it is an
external ABI which is in use by userspace software.
The aforementioned commit inadvertently modified these addresses and
made them virtual. This constitutes and ABI break. Additionally, it
leaks the kernel's memory layout to userspace. Partially revert that
commit, reintroducing the resource back into struct mac_device, while
keeping the intended changes (the rework of the address mapping).
Fixes: 262f2b782e25 ("net: fman: Map the base address once")
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sean Anderson <[email protected]>
Acked-by: Madalin Bucur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Update to v6.1-rc2 to grab more fixes.
Signed-off-by: Maarten Lankhorst <[email protected]>
|
|
Add Raptor Lake client parts (both RPL and RPL_S) support to pmc core
driver. Raptor Lake client parts reuse all the Alder Lake PCH IPs.
Cc: Srinivas Pandruvada <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: David Box <[email protected]>
Acked-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Gayatri Kammela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
For apollolake the mapping between LEDs and GPIO pins was off because of
a refactoring when we introduced a new device model.
In addition to the reordering the indices in the lookup table need to be
updated as well.
Fixes: a97126265dfe ("leds: simatic-ipc-leds-gpio: add new model 227G")
Signed-off-by: Henning Schild <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
The mlx5e_macsec_cleanup() routine has NULL pointer dereferencing if mlx5
device doesn't support MACsec (priv->macsec will be NULL).
While at it delete comment line, assignment and extra blank lines, so fix
everything in one patch.
Fixes: 1f53da676439 ("net/mlx5e: Create advanced steering operation (ASO) object for MACsec")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
commit b0c07116c894 ("platform/x86: amd-pmc: Avoid reading SMU version at
probe time") adjusted the behavior for amd-pmc to avoid reading the SMU
version at startup but rather on first use to improve boot time.
However the SMU version is also used to decide whether to place a timer
based wakeup in the OS_HINT message. If the idlemask hasn't been read
before this message was sent then the SMU version will not have been
cached.
Ensure the SMU version has been read before deciding whether or not to
run this codepath.
Cc: [email protected] # 6.0
Reported-by: You-Sheng Yang <[email protected]>
Tested-by: Anson Tsao <[email protected]>
Fixes: b0c07116c894 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time")
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
NIC is stopped with rtnl_lock held, and during the stop it cancels the
'service_task' work and free irqs.
However, if CONFIG_MACSEC is set, rtnl_lock is acquired both from
aq_nic_service_task and aq_linkstate_threaded_isr. Then a deadlock
happens if aq_nic_stop tries to cancel/disable them when they've already
started their execution.
As the deadlock is caused by rtnl_lock, it causes many other processes
to stall, not only atlantic related stuff.
Fix it by introducing a mutex that protects each NIC's macsec related
data, and locking it instead of the rtnl_lock from the service task and
the threaded IRQ.
Before this patch, all macsec data was protected with rtnl_lock, but
maybe not all of it needs to be protected. With this new mutex, further
efforts can be made to limit the protected data only to that which
requires it. However, probably it doesn't worth it because all macsec's
data accesses are infrequent, and almost all are done from macsec_ops
or ethtool callbacks, called holding rtnl_lock, so macsec_mutex won't
never be much contended.
The issue appeared repeteadly attaching and deattaching the NIC to a
bond interface. Doing that after this patch I cannot reproduce the bug.
Fixes: 62c1c2e606f6 ("net: atlantic: MACSec offload skeleton")
Reported-by: Li Liang <[email protected]>
Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Íñigo Huguet <[email protected]>
Reviewed-by: Igor Russkikh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
models
thinkpad_acpi was reporting 2 fans on a ThinkPad T14s gen 1, even though
the laptop has only 1 fan.
The second, not present fan always reads 65535 (-1 in 16 bit signed),
ignore fans which report 65535 to avoid reporting the non present fan.
Signed-off-by: Jelle van der Waa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Add quirk for ASUS ROG X16 Flow 2-in-1 to enable tablet mode with
lid flip (all screen rotations).
Signed-off-by: Luke D. Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
For cases where DP has HDMI2.1 sink and FRL Link issues are detected,
reset the flag to state FRL trained status before restarting FRL
training.
Fixes: 9488a030ac91 ("drm/i915: Add support for enabling link status and recovery")
Cc: Swati Sharma <[email protected]>
Cc: Ankit Nautiyal <[email protected]>
Cc: Uma Shankar <[email protected]> (v2)
Cc: Jani Nikula <[email protected]>
Signed-off-by: Ankit Nautiyal <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 47e1a59e60c688c5f95b67277202f05b7e84c189)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
DGFX platforms has lmem and cpu can access the lmem objects
via mmap and i915 internal i915_gem_object_pin_map() for
i915 own usages. Both of these methods has pre-requisite
requirement to keep GFX PCI endpoint in D0 for a supported
iomem transaction over PCI link. (Refer PCIe specs 5.3.1.4.1)
Both DG1/DG2 have a known hardware bug that violates the PCIe specs
and support the iomem read write transaction over PCIe bus despite
endpoint is D3 state.
Due to above H/W bug, we had never observed any issue with i915 runtime
PM versus lmem access.
But this issue becomes visible when PCIe gfx endpoint's upstream
bridge enters to D3, at this point any lmem read/write access will be
returned as unsupported request. But again this issue is not observed
on every platform because it has been observed on few host machines
DG1/DG2 endpoint's upstream bridge does not bind with pcieport driver.
which really disables the PCIe power savings and leaves the bridge
at D0 state.
We need a unique interface to read/write from lmem with runtime PM
wakeref protection something similar to intel_uncore_{read, write},
keep autosuspend control to 'on' on all discrete platforms,
until we have a unique interface to read/write from lmem.
This just change the default autosuspend setting of i915 on dGPU,
user can still change it to 'auto'.
v2:
- Modified the commit message and subject with more information.
- Changed the Fixes tag to LMEM support commit. [Joonas]
- Changed !HAS_LMEM() Cond to !IS_DGFX(). [Rodrigo]
Fixes: b908be543e44 ("drm/i915: support creating LMEM objects")
Suggested-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Anshuman Gupta <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 66eb93e71a7a6695b7c5eb682e3ca1c980cf9d58)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
Workaround 1607297627 was missed for Alderlake-P, so here extending it
to it and adding the fixes tag so this WA is backported to all
stable kernels.
v2:
- fixed subject
- added Fixes tag
BSpec: 54369
Cc: <[email protected]> # v5.17+
Fixes: dfb924e33927 ("drm/i915/adlp: Remove require_force_probe protection")
Reviewed-by: Lucas De Marchi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 847eec69f01a28ca44f5ac7e1d71d3a60263d680)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or
mac_cb(skb)) without any actual reset of this area prior to its use.
As part of a useful rework of the use of this region, 32edc40ae65c
("ieee802154: change _cb handling slightly") introduced mac_cb_init() to
basically memset the cb field to 0. In particular, this new function got
called at the beginning of mac802154_parse_frame_start(), right before
the location where the buffer got actually filled.
What went through unnoticed however, is the fact that the very first
helper called by device drivers in the receive path already used this
area to save the LQI value for later extraction. Resetting the cb field
"so late" led to systematically zeroing the LQI.
If we consider the reset of the cb field needed, we can make it as soon
as we get an skb from a device driver, right before storing the LQI,
as is the very first time we need to write something there.
Cc: [email protected]
Fixes: 32edc40ae65c ("ieee802154: change _cb handling slightly")
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
|
|
This reverts commit 665c157e0204176023860b51a46528ba0ba62c33.
It causes reported build warnings:
drivers/hwtracing/coresight/coresight-cti-core.c: In functio
n 'cti_enable_hw':
drivers/hwtracing/coresight/coresight-cti-core.c:93:24: warning: unused variable 'dev' [-Wunused-variable]
93 | struct device *dev = &drvdata->csdev->dev;
| ^~~
drivers/hwtracing/coresight/coresight-cti-core.c: In function 'cti_disable_hw':
drivers/hwtracing/coresight/coresight-cti-core.c:154:24: warning: unused variable 'dev' [-Wunused-variable]
154 | struct device *dev = &drvdata->csdev->dev;
| ^~~
Reported-by: Stephen Rothwell <[email protected]>
Cc: Aishwarya TCV <[email protected]>
Cc: Cristian Marussi <[email protected]>
Cc: Suzuki Poulose <[email protected]>
Cc: James Clark <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Fixes: 665c157e0204 ("coresight: cti: Fix hang in cti_disable_hw()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The quad8_action_read() function checks the Count function mode and
Count direction without first acquiring a lock. This is a race condition
because the function mode could change by the time the direction is
checked.
Because the quad8_function_read() already acquires a lock internally,
the quad8_function_read() is refactored to spin out the no-lock code to
a new quad8_function_get() function.
To resolve the race condition in quad8_action_read(), a lock is acquired
before calling quad8_function_get() and quad8_direction_read() in order
to get both function mode and direction atomically.
Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: William Breathitt Gray <[email protected]>
|
|
The signal_read(), action_read(), and action_write() callbacks have been
assuming Signal0 is requested without checking. This results in requests
for Signal1 returning data for Signal0. This patch fixes these
oversights by properly checking for the Signal's id in the respective
callbacks and handling accordingly based on the particular Signal
requested. The trig_inverted member of the mchp_tc_data is removed as
superfluous.
Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Cc: [email protected]
Reviewed-by: Kamel Bouhara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: William Breathitt Gray <[email protected]>
|
|
There is a kmemleak when writedata alloc failed:
unreferenced object 0xffff888175ae4000 (size 4096):
comm "dd", pid 19419, jiffies 4296028749 (age 739.396s)
hex dump (first 32 bytes):
80 02 b0 04 00 ea ff ff c0 02 b0 04 00 ea ff ff ................
80 22 4c 04 00 ea ff ff c0 22 4c 04 00 ea ff ff ."L......"L.....
backtrace:
[<0000000072fdbb86>] __kmalloc_node+0x50/0x150
[<0000000039faf56f>] __iov_iter_get_pages_alloc+0x605/0xdd0
[<00000000f862a9d4>] iov_iter_get_pages_alloc2+0x3b/0x80
[<000000008f226067>] cifs_write_from_iter+0x2ae/0xe40
[<000000001f78f2f1>] __cifs_writev+0x337/0x5c0
[<00000000257fcef5>] vfs_write+0x503/0x690
[<000000008778a238>] ksys_write+0xb9/0x150
[<00000000ed82047c>] do_syscall_64+0x35/0x80
[<000000003365551d>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
__iov_iter_get_pages_alloc+0x605/0xdd0 is:
want_pages_array at lib/iov_iter.c:1304
(inlined by) __iov_iter_get_pages_alloc at lib/iov_iter.c:1457
If writedata allocate failed, the pages and pagevec should be cleanup.
Fixes: 8c5f9c1ab7cb ("CIFS: Add support for direct I/O write")
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Zhang Xiaoxu <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
There is a memory leak when writedata alloc failed:
unreferenced object 0xffff888192364000 (size 8192):
comm "sync", pid 22839, jiffies 4297313967 (age 60.230s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000027de0814>] __kmalloc+0x4d/0x150
[<00000000b21e81ab>] cifs_writepages+0x35f/0x14a0
[<0000000076f7d20e>] do_writepages+0x10a/0x360
[<00000000d6a36edc>] filemap_fdatawrite_wbc+0x95/0xc0
[<000000005751a323>] __filemap_fdatawrite_range+0xa7/0xe0
[<0000000088afb0ca>] file_write_and_wait_range+0x66/0xb0
[<0000000063dbc443>] cifs_strict_fsync+0x80/0x5f0
[<00000000c4624754>] __x64_sys_fsync+0x40/0x70
[<000000002c0dc744>] do_syscall_64+0x35/0x80
[<0000000052f46bee>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
cifs_writepages+0x35f/0x14a0 is:
kmalloc_array at include/linux/slab.h:628
(inlined by) kcalloc at include/linux/slab.h:659
(inlined by) cifs_writedata_alloc at fs/cifs/file.c:2438
(inlined by) wdata_alloc_and_fillpages at fs/cifs/file.c:2527
(inlined by) cifs_writepages at fs/cifs/file.c:2705
If writedata alloc failed in cifs_writedata_alloc(), the pages array
should be freed.
Fixes: 8e7360f67e75 ("CIFS: Add support for direct pages in wdata")
Signed-off-by: Zhang Xiaoxu <[email protected]>
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
|
|
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
|
|
This reverts commit 72a95859728a7866522e6633818bebc1c2519b17.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Lee Jones <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.
Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c. But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <[email protected]>
Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/[email protected]/
Cc: Petr Vorel <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Adjust code to not trip up CFI
- Fix sched group cookie matching
* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Introduce struct balance_callback to avoid CFI mismatches
sched/core: Fix comparison in sched_group_cookie_match()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Fix ORC stack unwinding when GCOV is enabled
* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unreliable stack dump with gcov
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
|
|
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
"1st set of IIO fixes for the 6.1 cycle.
Usual bunch of driver fixes + one set of fixes for driver bugs
introduced by a core change to how buffer attributes are handled.
- buffer attributes
* Remove usage of IIO_CONST_ATTR() for buffer attributes in all drivers
where this occurred as that broke wrapping code need to duplicate these
for multiple buffer support. The minimal fix is moving to
IIO_DEVICE_ATTR_RO() with separate _show() routines. A cleanup of
this code, preventing similar issues in future will follow next merge
window.
- tools/iio
* Wrong handling of number of digits in the number 0.
- adi,ltc2983
* Avoid reallocating channels on each wake up from sleep by moving
that step out of the ltc2983_setup() function.
- microchip,mcp3911
* Wrong ID bits + masking in debug prints.
* Fix ARRAY_SIZE() vs sizeof() mix up.
* Handle NULL return on trigger allocation failure correctly.
- st,stm32-adc:
* Ensure we initialize sampling time even when optional property not
provided in DT. Internal channels require a minimum value that will
not otherwise be set.
- taos,tsl2583
* Fix a double call of iio_device_unregister() via device managed and
un-managed paths."
* tag 'iio-fixes-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
iio: light: tsl2583: Fix module unloading
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"RPM fix for qcom-cci, platform module alias for xiic, build warning
fix for mlxbf, typo fixes in comments"
* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxbf: depend on ACPI; clean away ifdeffage
i2c: fix spelling typos in comments
i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
i2c: xiic: Add platform module alias
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a simplification that broke pci-tegra due to a masking error
- Update MAINTAINERS for Kishon's email address change and TI
DRA7XX/J721E maintainer change
* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
|
|
The default elevator is allocated in the beginning of device_add_disk(),
however, it's not freed in the following error path.
Fixes: 50e34d78815e ("block: disable the elevator int del_gendisk")
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|