| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
also print out the new stripe key
Signed-off-by: Kent Overstreet <[email protected]>
|
|
additional debug stat
Signed-off-by: Kent Overstreet <[email protected]>
|
|
When reshaping existing stripes, we should keep them on the same target
that they were allocated on; to do this, we need to add a field to the
btree stripe type.
This is a tad awkward, because we only have 8 bits left, and targets are
16 bits - but we only need to store a label, not a full target.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
factor out a common helper
Signed-off-by: Kent Overstreet <[email protected]>
|
|
We want to be using private errcodes whenever possible, for better error
messages.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
In backpointers fsck, we do a seqential scan of one btree, and check
references to another: extents <-> backpointers
Checking references generates random lookups, so we want to pin that
btree in memory (or only a range, if it doesn't fit in ram).
Previously, this was done with a simple check in the shrinker - "if
btree node is in range being pinned, don't free it" - but this generated
OOMs, as our shrinker wasn't well behaved if there was less memory
available than expected.
Instead, we now have two different shrinkers and lru lists; the second
shrinker being for pinned nodes, with seeks set much higher than normal
- so they can still be freed if necessary, but we'll prefer not to.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
this is prep for introducing a second live list and shrinker for pinned
nodes
Signed-off-by: Kent Overstreet <[email protected]>
|
|
32 bits won't overflow any time soon, but size_t is the correct type for
counting objects in memory.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
bch2_dev_rcu() now properly errors if the device is invalid
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Factor out bch2_show_options() into a generic helper, for debugging
option passing issues.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Fix the following compilation error:
```
fs/bcachefs/sb-members.c: In function ‘bch2_sb_member_alloc’:
fs/bcachefs/sb-members.c:508:2: error: a label can only be part of a statement and a declaration is not a statement
508 | unsigned nr_devices = max_t(unsigned, dev_idx + 1, c->sb.nr_devices);
```
Fixes: a7d364a133c7 ("bcachefs: bch2_sb_member_alloc()")
Signed-off-by: Hongbo Li <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>
|
|
refactoring
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
No reason for it not to be where it's needed.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
This adds mount options for specifying recovery passes to run, or
exclude; the immediate need for this is that backpointers fsck is having
trouble completing, so we need a way to skip it.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
When freeing in a shrinker callback, we need to notify memory reclaim,
so it knows forward progress has been made.
Normally this is done in e.g. slab code, but we're not freeing through
slab - or rather we are, but these allocations are big, and use the
kmalloc_large() path.
This is really a bug in the slub code, but we're working around it here
for now.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
This is needed for overlayfs, which is used by container managers.
Signed-off-by: Sasha Finkelstein <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>
|
|
this was an oversight: rebalance is moving data to a specific device, so
we don't want it falling back to the full filesystem
Signed-off-by: Kent Overstreet <[email protected]>
|
|
rebalance writes must be BCH_WRITE_ALLOC_NOWAIT because they don't
allocate from the full filesystem - but we don't want spurious
allocation failures due to open buckets.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
like the previous patch, kill use of bare arrays; the encryption code
likes to work in big batches, so this is a small performance
improvement.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
convert to darray, and add a fallback when allocation fails
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
|
|
Data mismatch found when testing ipsec tunnel with AES/GCM crypto.
Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature.
Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The paes_s390 module didn't declare the correct aliases for the
algorithms that it registered. Instead it declared an alias for
the non-existent paes algorithm.
The Crypto API will eventually try to load the paes algorithm, to
construct the cbc(paes) instance. But because the module does not
actually contain a "paes" algorithm, this will fail.
Previously this failure was hidden and the the cbc(paes) lookup will
be retried. This was fixed recently, thus exposing the buggy alias
in paes_s390.
Replace the bogus paes alias with aliases for the actual algorithms.
Reported-by: Ingo Franzki <[email protected]>
Fixes: e7a4142b35ce ("crypto: api - Fix generic algorithm self-test races")
Signed-off-by: Herbert Xu <[email protected]>
Tested-by: Ingo Franzki <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Because hardware will read in multiples of 4 SG entries, ensure
the allocated length is always padded. This was already done
by some callers of ahash_edesc_alloc, but ahash_digest was conspicuously
missing.
In any case, doing it in the allocation function ensures that the
memory is always there.
Reported-by: Guangwu Zhang <[email protected]>
Fixes: a5e5c13398f3 ("crypto: caam - fix S/G table passing page boundary")
Signed-off-by: Herbert Xu <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs update from Mike Marshall:
"Constify struct kobj_type"
* tag 'for-linux-6.12-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: Constify struct kobj_type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Lots of cleanups and bug fixes this cycle, primarily in the block
allocation, extent management, fast commit, and journalling"
* tag 'ext4_for_linus-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (93 commits)
ext4: convert EXT4_B2C(sbi->s_stripe) users to EXT4_NUM_B2C
ext4: check stripe size compatibility on remount as well
ext4: fix i_data_sem unlock order in ext4_ind_migrate()
ext4: remove the special buffer dirty handling in do_journal_get_write_access
ext4: fix a potential assertion failure due to improperly dirtied buffer
ext4: hoist ext4_block_write_begin and replace the __block_write_begin
ext4: persist the new uptodate buffers in ext4_journalled_zero_new_buffers
ext4: dax: keep orphan list before truncate overflow allocated blocks
ext4: fix error message when rejecting the default hash
ext4: save unnecessary indentation in ext4_ext_create_new_leaf()
ext4: make some fast commit functions reuse extents path
ext4: refactor ext4_swap_extents() to reuse extents path
ext4: get rid of ppath in convert_initialized_extent()
ext4: get rid of ppath in ext4_ext_handle_unwritten_extents()
ext4: get rid of ppath in ext4_ext_convert_to_initialized()
ext4: get rid of ppath in ext4_convert_unwritten_extents_endio()
ext4: get rid of ppath in ext4_split_convert_extents()
ext4: get rid of ppath in ext4_split_extent()
ext4: get rid of ppath in ext4_force_split_extent_at()
ext4: get rid of ppath in ext4_split_extent_at()
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs blocksize updates from Christian Brauner:
"This contains the vfs infrastructure as well as the xfs bits to enable
support for block sizes (bs) larger than page sizes (ps) plus a few
fixes to related infrastructure.
There has been efforts over the last 16 years to enable enable Large
Block Sizes (LBS), that is block sizes in filesystems where bs > page
size. Through these efforts we have learned that one of the main
blockers to supporting bs > ps in filesystems has been a way to
allocate pages that are at least the filesystem block size on the page
cache where bs > ps.
Thanks to various previous efforts it is possible to support bs > ps
in XFS with only a few changes in XFS itself. Most changes are to the
page cache to support minimum order folio support for the target block
size on the filesystem.
A motivation for Large Block Sizes today is to support high-capacity
(large amount of Terabytes) QLC SSDs where the internal Indirection
Unit (IU) are typically greater than 4k to help reduce DRAM and so in
turn cost and space. In practice this then allows different
architectures to use a base page size of 4k while still enabling
support for block sizes aligned to the larger IUs by relying on high
order folios on the page cache when needed.
It also allows to take advantage of the drive's support for atomics
larger than 4k with buffered IO support in Linux. As described this
year at LSFMM, supporting large atomics greater than 4k enables
databases to remove the need to rely on their own journaling, so they
can disable double buffered writes, which is a feature different cloud
providers are already enabling through custom storage solutions"
* tag 'vfs-6.12.blocksize' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
Documentation: iomap: fix a typo
iomap: remove the iomap_file_buffered_write_punch_delalloc return value
iomap: pass the iomap to the punch callback
iomap: pass flags to iomap_file_buffered_write_punch_delalloc
iomap: improve shared block detection in iomap_unshare_iter
iomap: handle a post-direct I/O invalidate race in iomap_write_delalloc_release
docs:filesystems: fix spelling and grammar mistakes in iomap design page
filemap: fix htmldoc warning for mapping_align_index()
iomap: make zero range flush conditional on unwritten mappings
iomap: fix handling of dirty folios over unwritten extents
iomap: add a private argument for iomap_file_buffered_write
iomap: remove set_memor_ro() on zero page
xfs: enable block size larger than page size support
xfs: make the calculation generic in xfs_sb_validate_fsb_count()
xfs: expose block size in stat
xfs: use kvmalloc for xattr buffers
iomap: fix iomap_dio_zero() for fs bs > system page size
filemap: cap PTE range to be created to allowed zero fill in folio_map_range()
mm: split a folio in minimum folio order chunks
readahead: allocate folios with mapping_min_order in readahead
...
|
|
I noticed that "xdrgen source" reorders the procedure encoder and
decoder functions every time it is run. I would prefer that the
generated code be more deterministic: it enables a reader to better
see exactly what has changed between runs of the tool.
The problem is that Python sets are not ordered. I use a Python set
to ensure that, when multiple procedures use a particular argument or
result type, the encoder/decoder for that type is emitted only once.
Sets aren't ordered, but I can use Python dictionaries for this
purpose to ensure the procedure functions are always emitted in the
same order if the .x file does not change.
Signed-off-by: Chuck Lever <[email protected]>
|
|
'typedef opaque yada<XYZ>' should use xdrgen's built-in opaque
encoder and decoder, to enable better compiler optimization.
Signed-off-by: Chuck Lever <[email protected]>
|
|
xdr_stream_encode_u32() returns XDR_UNIT on success.
xdr_stream_decode_u32() returns zero or -EMSGSIZE, but never
XDR_UNIT.
Signed-off-by: Chuck Lever <[email protected]>
|
|
Add a Python-based tool for translating XDR specifications into XDR
encoder and decoder functions written in the Linux kernel's C coding
style. The generator attempts to match the usual C coding style of
the Linux kernel's SunRPC consumers.
This approach is similar to the netlink code generator in
tools/net/ynl .
The maintainability benefits of machine-generated XDR code include:
- Stronger type checking
- Reduces the number of bugs introduced by human error
- Makes the XDR code easier to audit and analyze
- Enables rapid prototyping of new RPC-based protocols
- Hardens the layering between protocol logic and marshaling
- Makes it easier to add observability on demand
- Unit tests might be built for both the tool and (automatically)
for the generated code
In addition, converting the XDR layer to use memory-safe languages
such as Rust will be easier if much of the code can be converted
automatically.
Tested-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
The pair of bloom filtered used by delegation_blocked() was intended to
block delegations on given filehandles for between 30 and 60 seconds. A
new filehandle would be recorded in the "new" bit set. That would then
be switch to the "old" bit set between 0 and 30 seconds later, and it
would remain as the "old" bit set for 30 seconds.
Unfortunately the code intended to clear the old bit set once it reached
30 seconds old, preparing it to be the next new bit set, instead cleared
the *new* bit set before switching it to be the old bit set. This means
that the "old" bit set is always empty and delegations are blocked
between 0 and 30 seconds.
This patch updates bd->new before clearing the set with that index,
instead of afterwards.
Reported-by: Olga Kornievskaia <[email protected]>
Cc: [email protected]
Fixes: 6282cd565553 ("NFSD: Don't hand out delegations for 30 seconds after recalling them.")
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Benjamin Coddington <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
At this point in compound processing, currentfh refers to the parent of
the file, not the file itself. Get the correct dentry from the delegation
stateid instead.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
The code in nfsd4_deleg_getattr_conflict() is convoluted and buggy.
With this patch we:
- properly handle non-nfsd leases. We must not assume flc_owner is a
delegation unless fl_lmops == &nfsd_lease_mng_ops
- move the main code out of the for loop
- have a single exit which calls nfs4_put_stid()
(and other exits which don't need to call that)
[ jlayton: refactored on top of Neil's other patch: nfsd: fix
nfsd4_deleg_getattr_conflict in presence of third party lease ]
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
This patch is intended to go on top of "nfsd: return -EINVAL when
namelen is 0" from Li Lingfeng. Li's patch checks for 0, but we should
be enforcing an upper bound as well.
Note that if nfsdcld somehow gets an id > NFS4_OPAQUE_LIMIT in its
database, it'll truncate it to NFS4_OPAQUE_LIMIT when it does the
downcall anyway.
Signed-off-by: Scott Mayhew <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may
result in namelen being 0, which will cause memdup_user() to return
ZERO_SIZE_PTR.
When we access the name.data that has been assigned the value of
ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is
triggered.
[ T1205] ==================================================================
[ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260
[ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205
[ T1205]
[ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406
[ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ T1205] Call Trace:
[ T1205] dump_stack+0x9a/0xd0
[ T1205] ? nfs4_client_to_reclaim+0xe9/0x260
[ T1205] __kasan_report.cold+0x34/0x84
[ T1205] ? nfs4_client_to_reclaim+0xe9/0x260
[ T1205] kasan_report+0x3a/0x50
[ T1205] nfs4_client_to_reclaim+0xe9/0x260
[ T1205] ? nfsd4_release_lockowner+0x410/0x410
[ T1205] cld_pipe_downcall+0x5ca/0x760
[ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0
[ T1205] ? down_write_killable_nested+0x170/0x170
[ T1205] ? avc_policy_seqno+0x28/0x40
[ T1205] ? selinux_file_permission+0x1b4/0x1e0
[ T1205] rpc_pipe_write+0x84/0xb0
[ T1205] vfs_write+0x143/0x520
[ T1205] ksys_write+0xc9/0x170
[ T1205] ? __ia32_sys_read+0x50/0x50
[ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110
[ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110
[ T1205] do_syscall_64+0x33/0x40
[ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1
[ T1205] RIP: 0033:0x7fdbdb761bc7
[ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514
[ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7
[ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008
[ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001
[ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b
[ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000
[ T1205] ==================================================================
Fix it by checking namelen.
Signed-off-by: Li Lingfeng <[email protected]>
Fixes: 74725959c33c ("nfsd: un-deprecate nfsdcld")
Reviewed-by: Jeff Layton <[email protected]>
Reviewed-by: Scott Mayhew <[email protected]>
Tested-by: Scott Mayhew <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Add an nfsd_copy_async_done to record the timestamp, the final
status code, and the callback stateid of an async copy.
Rename the nfsd_copy_do_async tracepoint to match that naming
convention to make it easier to enable both of these with a
single glob.
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|