aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-05-22net: Make IP alignment calulations clearer.David S. Miller1-4/+8
The assignmnet: ip_align = strict ? 2 : NET_IP_ALIGN; in compare_pkt_ptr_alignment() trips up Coverity because we can only get to this code when strict is true, therefore ip_align will always be 2 regardless of NET_IP_ALIGN's value. So just assign directly to '2' and explain the situation in the comment above. Reported-by: "Gustavo A. R. Silva" <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-22mmc: sdhci-iproc: suppress spurious interrupt with Multiblock readSrinath Mannam1-1/+2
The stingray SDHCI hardware supports ACMD12 and automatically issues after multi block transfer completed. If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen on multi block read command with below error message: Got data interrupt 0x00000002 even though no data operation was in progress. This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACM12 support in SDHCI hardware and suppress spurious interrupt. Signed-off-by: Srinath Mannam <[email protected]> Reviewed-by: Ray Jui <[email protected]> Reviewed-by: Scott Branden <[email protected]> Acked-by: Adrian Hunter <[email protected]> Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver") Cc: <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2017-05-22bonding: fix accounting of active ports in 3adJarod Wilson1-1/+1
As of 7bb11dc9f59d and 0622cab0341c, bond slaves in a 3ad bond are not removed from the aggregator when they are down, and the active slave count is NOT equal to number of ports in the aggregator, but rather the number of ports in the aggregator that are still enabled. The sysfs spew for bonding_show_ad_num_ports() has a comment that says "Show number of active 802.3ad ports.", but it's currently showing total number of ports, both active and inactive. Remedy it by using the same logic introduced in 0622cab0341c in __bond_3ad_get_active_agg_info(), so sysfs, procfs and netlink all report the number of active ports. Note that this means that IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of NUM_PORTS, and thus perhaps should be renamed for clarity. Lightly tested on a dual i40e lacp bond, simulating link downs with an ip link set dev <slave2> down, was able to produce the state where I could see both in the same aggregator, but a number of ports count of 1. MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 <--- Slave Interface: ens10 MII Status: up <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 1 <--- Slave Interface: ens10 MII Status: down <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 CC: Jay Vosburgh <[email protected]> CC: Veaceslav Falico <[email protected]> CC: Andy Gospodarek <[email protected]> CC: [email protected] Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-22net: atheros: atl2: don't return zero on failure path in atl2_probe()Alexey Khoroshilov1-4/+4
If dma mask checks fail in atl2_probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds proper error code return value and make error code setup unified. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-22mmc: cavium: Fix probing race with regulatorJan Glauber2-1/+16
If the regulator probing is not yet finished this driver might catch a -EPROBE_DEFER. Returning after this condition did not remove the created platform device. On a repeated call to the probe function the of_platform_device_create fails. Calling of_platform_device_destroy after EPROBE_DEFER resolves this bug. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2017-05-22of/platform: Make of_platform_device_destroy globally visibleJan Glauber2-1/+3
of_platform_device_destroy is the counterpart to of_platform_device_create which is a non-static function. After creating a platform device it might be neccessary to destroy it to deal with -EPROBE_DEFER where a repeated of_platform_device_create call would fail otherwise. Therefore also make of_platform_device_destroy globally visible. Signed-off-by: Jan Glauber <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2017-05-22mmc: cavium: Prevent crash with incomplete DTJan Glauber1-15/+10
In case the DT specifies neither a regulator nor a gpio for the shared power the driver will crash accessing the regulator. Prevent the crash by checking the regulator before use. Use mmc_regulator_get_supply() instead of open coding the same logic. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2017-05-22ipv6: fix out of bound writes in __ip6_append_data()Eric Dumazet1-7/+8
Andrey Konovalov and [email protected] reported crashes caused by one skb shared_info being overwritten from __ip6_append_data() Andrey program lead to following state : copy -4200 datalen 2000 fraglen 2040 maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200 The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen, fraggap, 0); is overwriting skb->head and skb_shared_info Since we apparently detect this rare condition too late, move the code earlier to even avoid allocating skb and risking crashes. Once again, many thanks to Andrey and syzkaller team. Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Andrey Konovalov <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Reported-by: <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-22ALSA: hda - Update the list of quirk modelsTakashi Iwai1-49/+65
I've forgotten to sync the documentation with the actually available options for some time. Now all updated. Signed-off-by: Takashi Iwai <[email protected]>
2017-05-22ALSA: hda - Provide dual-codecs model option for a few Realtek codecsTakashi Iwai1-0/+3
Recently some laptops and mobos are equipped with the dual Realtek codecs that require special quirks. For making the debugging easier, add the model "dual-codecs" to be passed via module option. Signed-off-by: Takashi Iwai <[email protected]>
2017-05-22ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming moboTakashi Iwai1-0/+1
MSI Z270-Gamin mobo has also two ALC1220 codecs like Gigabyte AZ370- Gaming mobo. Apply the same quirk to this one. Signed-off-by: Takashi Iwai <[email protected]>
2017-05-22i2c: designware: Fix bogus sda_hold_time due to uninitialized varsJan Kiszka1-1/+1
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Fixes: 9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Ard Biesheuvel <[email protected]> Acked-by: Jarkko Nikula <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2017-05-22i2c: i2c-tiny-usb: fix buffer not being DMA capableSebastian Reichel1-4/+21
Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Cc: <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Acked-by: Till Harbaum <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2017-05-22drm/radeon: Fix oops upon driver load on PowerXpress laptopsLukas Wunner1-1/+1
Nicolai Stange reports the following oops which is caused by dereferencing rdev->pdev before it's subsequently set by radeon_device_init(). Fix it. BUG: unable to handle kernel NULL pointer dereference at 00000000000007cb IP: radeon_driver_load_kms+0xeb/0x230 [radeon] ... Call Trace: drm_dev_register+0x146/0x1d0 [drm] drm_get_pci_dev+0x9a/0x180 [drm] radeon_pci_probe+0xb8/0xe0 [radeon] local_pci_probe+0x45/0xa0 pci_device_probe+0x14f/0x1a0 driver_probe_device+0x29c/0x450 __driver_attach+0xdf/0xf0 ? driver_probe_device+0x450/0x450 bus_for_each_dev+0x6c/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x170/0x270 driver_register+0x60/0xe0 ? 0xffffffffc0508000 __pci_register_driver+0x4c/0x50 drm_pci_init+0xeb/0x100 [drm] ? vga_switcheroo_register_handler+0x6a/0x90 ? 0xffffffffc0508000 radeon_init+0x98/0xb6 [radeon] do_one_initcall+0x52/0x1a0 ? __vunmap+0x81/0xb0 ? kmem_cache_alloc_trace+0x159/0x1b0 ? do_init_module+0x27/0x1f8 do_init_module+0x5f/0x1f8 load_module+0x27ce/0x2be0 SYSC_finit_module+0xdf/0x110 ? SYSC_finit_module+0xdf/0x110 SyS_finit_module+0xe/0x10 do_syscall_64+0x67/0x150 entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 7ffb0ce31cf9 ("drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo") Reported-and-tested-by: Nicolai Stange <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/cfb91ba052af06117137eec0637543a2626a7979.1495135190.git.lukas@wunner.de
2017-05-21Linux 4.12-rc2Linus Torvalds1-1/+1
2017-05-21x86: fix 32-bit case of __get_user_asm_u64()Linus Torvalds1-3/+3
The code to fetch a 64-bit value from user space was entirely buggered, and has been since the code was merged in early 2016 in commit b2f680380ddf ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit kernels"). Happily the buggered routine is almost certainly entirely unused, since the normal way to access user space memory is just with the non-inlined "get_user()", and the inlined version didn't even historically exist. The normal "get_user()" case is handled by external hand-written asm in arch/x86/lib/getuser.S that doesn't have either of these issues. There were two independent bugs in __get_user_asm_u64(): - it still did the STAC/CLAC user space access marking, even though that is now done by the wrapper macros, see commit 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses"). This didn't result in a semantic error, it just means that the inlined optimized version was hugely less efficient than the allegedly slower standard version, since the CLAC/STAC overhead is quite high on modern Intel CPU's. - the double register %eax/%edx was marked as an output, but the %eax part of it was touched early in the asm, and could thus clobber other inputs to the asm that gcc didn't expect it to touch. In particular, that meant that the generated code could look like this: mov (%eax),%eax mov 0x4(%eax),%edx where the load of %edx obviously was _supposed_ to be from the 32-bit word that followed the source of %eax, but because %eax was overwritten by the first instruction, the source of %edx was basically random garbage. The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark the 64-bit output as early-clobber to let gcc know that no inputs should alias with the output register. Cc: Al Viro <[email protected]> Cc: Benjamin LaHaise <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: [email protected] # v4.8+ Signed-off-by: Linus Torvalds <[email protected]>
2017-05-21Clean up x86 unsafe_get/put_user() type handlingLinus Torvalds1-2/+3
Al noticed that unsafe_put_user() had type problems, and fixed them in commit a7cc722fff0b ("fix unsafe_put_user()"), which made me look more at those functions. It turns out that unsafe_get_user() had a type issue too: it limited the largest size of the type it could handle to "unsigned long". Which is fine with the current users, but doesn't match our existing normal get_user() semantics, which can also handle "u64" even when that does not fit in a long. While at it, also clean up the type cast in unsafe_put_user(). We actually want to just make it an assignment to the expected type of the pointer, because we actually do want warnings from types that don't convert silently. And it makes the code more readable by not having that one very long and complex line. [ This patch might become stable material if we ever end up back-porting any new users of the unsafe uaccess code, but as things stand now this doesn't matter for any current existing uses. ] Cc: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-05-21Merge branch 'for-linus' of ↵Linus Torvalds2-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc uaccess fixes from Al Viro: "Fix for unsafe_put_user() (no callers currently in mainline, but anyone starting to use it will step into that) + alpha osf_wait4() infoleak fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: osf_wait4(): fix infoleak fix unsafe_put_user()
2017-05-21Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds3-1/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single scheduler fix: Prevent idle task from ever being preempted. That makes sure that synchronize_rcu_tasks() which is ignoring idle task does not pretend that no task is stuck in preempted state. If that happens and idle was preempted on a ftrace trampoline the machine crashes due to inconsistent state" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Call __schedule() from do_idle() without enabling preemption
2017-05-21Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of small fixes for the irq subsystem: - Cure a data ordering problem with chained interrupts - Three small fixlets for the mbigen irq chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix chained interrupt data ordering irqchip/mbigen: Fix the clear register offset calculation irqchip/mbigen: Fix potential NULL dereferencing irqchip/mbigen: Fix memory mapping code
2017-05-21bridge: start hello_timer when enabling KERNEL_STP in br_stp_startXin Long2-1/+2
Since commit 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers"), bridge would not start hello_timer if stp_enabled is not KERNEL_STP when br_dev_open. The problem is even if users set stp_enabled with KERNEL_STP later, the timer will still not be started. It causes that KERNEL_STP can not really work. Users have to re-ifup the bridge to avoid this. This patch is to fix it by starting br->hello_timer when enabling KERNEL_STP in br_stp_start. As an improvement, it's also to start hello_timer again only when br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is no reason to start the timer again when it's NO_STP. Fixes: 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers") Reported-by: Haidong Li <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-21smsc95xx: Support only IPv4 TCP/UDP csum offloadNisar Sayed1-3/+10
When TX checksum offload is used, if the computed checksum is 0 the LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4 UDP checksum, it indicates to receiver that no checksum is calculated. Under ipv6, UDP checksum yields a result of zero must be changed to 0xffff. Hence disabling checksum offload for ipv6 packets. Signed-off-by: Nisar Sayed <[email protected]> Reported-by: popcorn mix <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-21Merge branch 'arp-always-override-existing-neigh-entries-with-gratuitous-ARP'David S. Miller1-17/+39
Ihar Hrachyshka says: ==================== arp: always override existing neigh entries with gratuitous ARP This patchset is spurred by discussion started at https://patchwork.ozlabs.org/patch/760372/ where we figured that there is no real reason for enforcing override by gratuitous ARP packets only when arp_accept is 1. Same should happen when it's 0 (the default value). changelog v2: handled review comments by Julian Anastasov - fixed a mistake in a comment; - postponed addr_type calculation to as late as possible. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-05-21arp: always override existing neigh entries with gratuitous ARPIhar Hrachyshka1-4/+5
Currently, when arp_accept is 1, we always override existing neigh entries with incoming gratuitous ARP replies. Otherwise, we override them only if new replies satisfy _locktime_ conditional (packets arrive not earlier than _locktime_ seconds since the last update to the neigh entry). The idea behind locktime is to pick the very first (=> close) reply received in a unicast burst when ARP proxies are used. This helps to avoid ARP thrashing where Linux would switch back and forth from one proxy to another. This logic has nothing to do with gratuitous ARP replies that are generally not aligned in time when multiple IP address carriers send them into network. This patch enforces overriding of existing neigh entries by all incoming gratuitous ARP packets, irrespective of their time of arrival. This will make the kernel honour all incoming gratuitous ARP packets. Signed-off-by: Ihar Hrachyshka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-21arp: postpone addr_type calculation to as late as possibleIhar Hrachyshka1-7/+17
The addr_type retrieval can be costly, so it's worth trying to avoid its calculation as much as possible. This patch makes it calculated only for gratuitous ARP packets. This is especially important since later we may want to move is_garp calculation outside of arp_accept block, at which point the costly operation will be executed for all setups. The patch is the result of a discussion in net-dev: http://marc.info/?l=linux-netdev&m=149506354216994 Suggested-by: Julian Anastasov <[email protected]> Signed-off-by: Ihar Hrachyshka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-21arp: decompose is_garp logic into a separate functionIhar Hrachyshka1-12/+23
The code is quite involving already to earn a separate function for itself. If anything, it helps arp_process readability. Signed-off-by: Ihar Hrachyshka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-21arp: fixed error in a commentIhar Hrachyshka1-1/+1
the is_garp code deals just with gratuitous ARP packets, not every unsolicited packet. This patch is a result of a discussion in netdev: http://marc.info/?l=linux-netdev&m=149506354216994 Suggested-by: Julian Anastasov <[email protected]> Signed-off-by: Ihar Hrachyshka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-21tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0Wei Wang1-0/+4
When tcp_disconnect() is called, inet_csk_delack_init() sets icsk->icsk_ack.rcv_mss to 0. This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() => __tcp_select_window() call path to have division by 0 issue. So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0. Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Wei Wang <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-21osf_wait4(): fix infoleakAl Viro1-2/+4
failing sys_wait4() won't fill struct rusage... Cc: [email protected] Signed-off-by: Al Viro <[email protected]>
2017-05-21fix unsafe_put_user()Al Viro1-1/+1
__put_user_size() relies upon its first argument having the same type as what the second one points to; the only other user makes sure of that and unsafe_put_user() should do the same. Signed-off-by: Al Viro <[email protected]>
2017-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller21-79/+249
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) When using IPVS in direct-routing mode, normal traffic from the LVS host to a back-end server is sometimes incorrectly NATed on the way back into the LVS host. Patch to fix this from Julian Anastasov. 2) Calm down clang compilation warning in ctnetlink due to type mismatch, from Matthias Kaehlcke. 3) Do not re-setup NAT for conntracks that are already confirmed, this is fixing a problem that was introduced in the previous nf-next batch. Patch from Liping Zhang. 4) Do not allow conntrack helper removal from userspace cthelper infrastructure if already in used. This comes with an initial patch to introduce nf_conntrack_helper_put() that is required by this fix. From Liping Zhang. 5) Zero the pad when copying data to userspace, otherwise iptables fails to remove rules. This is a follow up on the patchset that sorts out the internal match/target structure pointer leak to userspace. Patch from the same author, Willem de Bruijn. This also comes with a build failure when CONFIG_COMPAT is not on, coming in the last patch of this series. 6) SYNPROXY crashes with conntrack entries that are created via ctnetlink, more specifically via conntrackd state sync. Patch from Eric Leblond. 7) RCU safe iteration on set element dumping in nf_tables, from Liping Zhang. 8) Missing sanitization of immediate date for the bitwise and cmp expressions in nf_tables. 9) Refcounting logic for chain and objects from set elements does not integrate into the nf_tables 2-phase commit protocol. 10) Missing sanitization of target verdict in ebtables arpreply target, from Gao Feng. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-05-20Merge tag 'trace-v4.12-rc1' of ↵Linus Torvalds10-11/+72
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix a bug caused by not cleaning up the new instance unique triggers when deleting an instance. It also creates a selftest that triggers that bug. - Fix the delayed optimization happening after kprobes boot up self tests being removed by freeing of init memory. - Comment kprobes on why the delay optimization is not a problem for removal of modules, to keep other developers from searching that riddle. - Fix another case of rcu not watching in stack trace tracing. * tag 'trace-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Make sure RCU is watching before calling a stack trace kprobes: Document how optimized kprobes are removed from module unload selftests/ftrace: Add test to remove instance with active event triggers selftests/ftrace: Fix bashisms ftrace: Remove #ifdef from code and add clear_ftrace_function_probes() stub ftrace/instances: Clear function triggers when removing instances ftrace: Simplify glob handling in unregister_ftrace_function_probe_func() tracing/kprobes: Enforce kprobes teardown after testing tracing: Move postpone selftests to core from early_initcall
2017-05-20Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds13-36/+59
Pull block fixes from Jens Axboe: "A small collection of fixes that should go into this cycle. - a pull request from Christoph for NVMe, which ended up being manually applied to avoid pulling in newer bits in master. Mostly fibre channel fixes from James, but also a few fixes from Jon and Vijay - a pull request from Konrad, with just a single fix for xen-blkback from Gustavo. - a fuseblk bdi fix from Jan, fixing a regression in this series with the dynamic backing devices. - a blktrace fix from Shaohua, replacing sscanf() with kstrtoull(). - a request leak fix for drbd from Lars, fixing a regression in the last series with the kref changes. This will go to stable as well" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: release the sq ref on rdma read errors nvmet-fc: remove target cpu scheduling flag nvme-fc: stop queues on error detection nvme-fc: require target or discovery role for fc-nvme targets nvme-fc: correct port role bits nvme: unmap CMB and remove sysfs file in reset path blktrace: fix integer parse fuseblk: Fix warning in super_setup_bdi_name() block: xen-blkback: add null check to avoid null pointer dereference drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub()
2017-05-20nvmet: release the sq ref on rdma read errorsVijay Immanuel3-0/+8
On rdma read errors, release the sq ref that was taken when the req was initialized. This avoids a hang in nvmet_sq_destroy() when the queue is being freed. Signed-off-by: Vijay Immanuel <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-05-20nvmet-fc: remove target cpu scheduling flagJames Smart4-15/+3
Remove NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED. It's unnecessary. Signed-off-by: James Smart <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-05-20nvme-fc: stop queues on error detectionJames Smart1-0/+4
Per the recommendation by Sagi on: http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html Rather than waiting for reset work thread to stop queues and abort the ios, immediately stop the queues on error detection. Reset thread will restop the queues (as it's called on other paths), but it does not appear to have a side effect. Signed-off-by: James Smart <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-05-20nvme-fc: require target or discovery role for fc-nvme targetsJames Smart1-0/+6
In order to create an association, the remoteport must be serving either a target role or a discovery role. Signed-off-by: James Smart <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-05-20nvme-fc: correct port role bitsJames Smart1-2/+2
FC Port roles is a bit mask, not individual values. Correct nvme definitions to unique bits. Signed-off-by: James Smart <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-05-20nvme: unmap CMB and remove sysfs file in reset pathJon Derrick1-1/+6
CMB doesn't get unmapped until removal while getting remapped on every reset. Add the unmapping and sysfs file removal to the reset path in nvme_pci_disable to match the mapping path in nvme_pci_enable. Fixes: 202021c1a ("nvme : Add sysfs entry for NVMe CMBs when appropriate") Signed-off-by: Jon Derrick <[email protected]> Acked-by: Keith Busch <[email protected]> Reviewed-By: Stephen Bates <[email protected]> Cc: <[email protected]> # 4.9+ Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-05-20Merge tag 'staging-4.12-rc2' of ↵Linus Torvalds15-165/+183
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are a number of staging driver fixes for 4.12-rc2 Most of them are typec driver fixes found by reviewers and users of the code. There are also some removals of files no longer needed in the tree due to the ion driver rewrite in 4.12-rc1, as well as some wifi driver fixes. And to round it out, a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'staging-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (22 commits) MAINTAINERS: greybus-dev list is members-only staging: fsl-dpaa2/eth: add ETHERNET dependency staging: typec: fusb302: refactor resume retry mechanism staging: typec: fusb302: reset i2c_busy state in error staging: rtl8723bs: remove re-positioned call to kfree in os_dep/ioctl_cfg80211.c staging: rtl8192e: GetTs Fix invalid TID 7 warning. staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD. staging: rtl8192e: fix 2 byte alignment of register BSSIDR. staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory. staging: vc04_services: Fix bulk cache maintenance staging: ccree: remove extraneous spin_unlock_bh() in error handler staging: typec: Fix sparse warnings about incorrect types staging: typec: fusb302: do not free gpio from managed resource staging: typec: tcpm: Fix Port Power Role field in PS_RDY messages staging: typec: tcpm: Respond to Discover Identity commands staging: typec: tcpm: Set correct flags in PD request messages staging: typec: tcpm: Drop duplicate PD messages staging: typec: fusb302: Fix chip->vbus_present init value staging: typec: fusb302: Fix module autoload staging: typec: tcpci: declare private structure as static ...
2017-05-20Merge tag 'usb-4.12-rc2' of ↵Linus Torvalds38-126/+232
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.12-rc2 Most of them come from Johan, in his valiant quest to fix up all drivers that could be affected by "malicious" USB devices. There's also some fixes for more "obscure" drivers to handle some of the vmalloc stack fallout (which for USB drivers, was always the case, but very few people actually ran those systems...) Other than that, the normal set of xhci and gadget and musb driver fixes as well. All have been in linux-next with no reported issues" * tag 'usb-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits) usb: musb: tusb6010_omap: Do not reset the other direction's packet size usb: musb: Fix trying to suspend while active for OTG configurations usb: host: xhci-plat: propagate return value of platform_get_irq() xhci: Fix command ring stop regression in 4.11 xhci: remove GFP_DMA flag from allocation USB: xhci: fix lock-inversion problem usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd usb: host: xhci-mem: allocate zeroed Scratchpad Buffer xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton usb: xhci: trace URB before giving it back instead of after USB: serial: qcserial: add more Lenovo EM74xx device IDs USB: host: xhci: use max-port define USB: hub: fix SS max number of ports USB: hub: fix non-SS hub-descriptor handling USB: hub: fix SS hub-descriptor handling USB: usbip: fix nonconforming hub descriptor USB: gadget: dummy_hcd: fix hub-descriptor removable fields doc-rst: fixed kernel-doc directives in usb/typec.rst USB: core: of: document reference taken by companion helper USB: ehci-platform: fix companion-device leak ...
2017-05-20Merge tag 'char-misc-4.12-rc2' of ↵Linus Torvalds5-11/+30
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are five small bugfixes for reported issues with 4.12-rc1 and earlier kernels. Nothing huge here, just a lp, mem, vpd, and uio driver fix, along with a Kconfig fixup for one of the misc drivers. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: Google VPD: Fix memory allocation error handling drivers: char: mem: Check for address space wraparound with mmap() uio: fix incorrect memory leak cleanup misc: pci_endpoint_test: select CRC32 char: lp: fix possible integer overflow in lp_setup()
2017-05-20Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds9-40/+77
Pull watchdog fixes from Wim Van Sebroeck: - orion_wdt compile-test dependencies - sama5d4_wdt: WDDIS handling and a race confition - pcwd_usb: fix NULL-deref at probe - cadence_wdt: fix timeout setting - wdt_pci: fix build error if SOFTWARE_REBOOT is defined - iTCO_wdt: all versions count down twice - zx2967: remove redundant dev_err call in zx2967_wdt_probe() - bcm281xx: Fix use of uninitialized spinlock * git://www.linux-watchdog.org/linux-watchdog: watchdog: bcm281xx: Fix use of uninitialized spinlock. watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe() iTCO_wdt: all versions count down twice watchdog: wdt_pci: fix build error if define SOFTWARE_REBOOT watchdog: cadence_wdt: fix timeout setting watchdog: pcwd_usb: fix NULL-deref at probe watchdog: sama5d4: fix race condition watchdog: sama5d4: fix WDDIS handling watchdog: orion: fix compile-test dependencies
2017-05-20Merge tag 'drm-fixes-for-v4.12-rc2' of ↵Linus Torvalds17-70/+94
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Mostly nouveau and i915, fairly quiet as usual for rc2" * tag 'drm-fixes-for-v4.12-rc2' of git://people.freedesktop.org/~airlied/linux: drm/atmel-hlcdc: Fix output initialization gpu: host1x: select IOMMU_IOVA drm/nouveau/fifo/gk104-: Silence a locking warning drm/nouveau/secboot: plug memory leak in ls_ucode_img_load_gr() error path drm/nouveau: Fix drm poll_helper handling drm/i915: don't do allocate_va_range again on PIN_UPDATE drm/i915: Fix rawclk readout for g4x drm/i915: Fix runtime PM for LPE audio drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages drm/i915/gvt: avoid unnecessary vgpu switch drm/i915/gvt: not to restore in-context mmio drm/etnaviv: don't put fence in case of submit failure drm/i915/gvt: fix typo: "supporte" -> "support" drm: hdlcd: Fix the calculation of the scanout start address
2017-05-19Merge tag 'scsi-fixes' of ↵Linus Torvalds13-25/+38
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the first sweep of mostly minor fixes. There's one security one: the read past the end of a buffer in qedf, and a panic fix for lpfc SLI-3 adapters, but the rest are a set of include and build dependency tidy ups and assorted other small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pmcraid: remove redundant check to see if request_size is less than zero scsi: lpfc: ensure els_wq is being checked before destroying it scsi: cxlflash: Select IRQ_POLL scsi: qedf: Avoid reading past end of buffer scsi: qedf: Cleanup the type of io_log->op scsi: lpfc: double lock typo in lpfc_ns_rsp() scsi: qedf: properly update arguments position in function call scsi: scsi_lib: Add #include <scsi/scsi_transport.h> scsi: MAINTAINERS: update OSD entries scsi: Skip deleted devices in __scsi_device_lookup scsi: lpfc: Fix panic on BFS configuration scsi: libfc: do not flood console with messages 'libfc: queue full ...'
2017-05-19Merge branch 'libnvdimm-for-next' of ↵Linus Torvalds5-13/+35
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A couple of compile fixes. With the removal of the ->direct_access() method from block_device_operations in favor of a new dax_device + dax_operations we broke two configurations. The CONFIG_BLOCK=n case is fixed by compiling out the block+dax helpers in the dax core. Configurations with FS_DAX=n EXT4=y / XFS=y and DAX=m fail due to the helpers the builtin filesystem needs being in a module, so we stub out the helpers in the FS_DAX=n case." * 'libnvdimm-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax, xfs, ext4: compile out iomap-dax paths in the FS_DAX=n case dax: fix false CONFIG_BLOCK dependency
2017-05-19Merge branch 'i2c/for-current' of ↵Linus Torvalds1-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "A regression fix for I2C that would be great to have in rc2" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: don't infer timings described by ACPI from clock rate
2017-05-19Merge tag 'iommu-fixes-v4.12-rc1' of ↵Linus Torvalds3-6/+13
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - another compile-fix as a fallout of the recent header-file cleanup - add a missing IO/TLB flush to the Intel VT-d kdump code path - a fix for ARM64 dma code to only access initialized iova_domain members * tag 'iommu-fixes-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/mediatek: Include linux/dma-mapping.h iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings iommu/dma: Don't touch invalid iova_domain members
2017-05-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds28-120/+292
Pull KVM fixes from Radim Krčmář: "ARM: - a fix for a build failure introduced in -rc1 when tracepoints are enabled on 32-bit ARM. - disable use of stack pointer protection in the hyp code which can cause panics. - a handful of VGIC fixes. - a fix to the init of the redistributors on GICv3 systems that prevented boot with kvmtool on GICv3 systems introduced in -rc1. - a number of race conditions fixed in our MMU handling code. - a fix for the guest being able to program the debug extensions for the host on the 32-bit side. PPC: - fixes for build failures with PR KVM configurations. - a fix for a host crash that can occur on POWER9 with radix guests. x86: - fixes for nested PML and nested EPT. - a fix for crashes caused by reserved bits in SSE MXCSR that could have been set by userspace. - an optimization of halt polling that fixes high CPU overhead. - fixes for four reports from Dan Carpenter's static checker. - a protection around code that shouldn't have been preemptible. - a fix for port IO emulation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits) KVM: x86: prevent uninitialized variable warning in check_svme() KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh() KVM: x86: zero base3 of unusable segments KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation KVM: x86: Fix potential preemption when get the current kvmclock timestamp KVM: Silence underflow warning in avic_get_physical_id_entry() KVM: arm/arm64: Hold slots_lock when unregistering kvm io bus devices KVM: arm/arm64: Fix bug when registering redist iodevs KVM: x86: lower default for halt_poll_ns kvm: arm/arm64: Fix use after free of stage2 page table kvm: arm/arm64: Force reading uncached stage2 PGD KVM: nVMX: fix EPT permissions as reported in exit qualification KVM: VMX: Don't enable EPT A/D feature if EPT feature is disabled KVM: x86: Fix load damaged SSEx MXCSR register kvm: nVMX: off by one in vmx_write_pml_buffer() KVM: arm: rename pm_fake handler to trap_raz_wi KVM: arm: plug potential guest hardware debug leakage kvm: arm/arm64: Fix race in resetting stage2 PGD KVM: arm/arm64: vgic-v3: Use PREbits to infer the number of ICH_APxRn_EL2 registers KVM: arm/arm64: vgic-v3: Do not use Active+Pending state for a HW interrupt ...
2017-05-19Merge tag 'for-linus-4.12b-rc2-tag' of ↵Linus Torvalds4-80/+47
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Some fixes for the new Xen 9pfs frontend and some minor cleanups" * tag 'for-linus-4.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: make xen_flush_tlb_all() static xen: cleanup pvh leftovers from pv-only sources xen/9pfs: p9_trans_xen_init and p9_trans_xen_exit can be static xen/9pfs: fix return value check in xen_9pfs_front_probe()
Powered by cgit, Gruvboxed by Blaster4385.