aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-29irqchip: gicv3-its: Fix device ID encodingAndre Przywara1-1/+1
When building ITS commands which have the device ID in it, we should mask off the whole upper 32 bits of the first command word before inserting the new value in there. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Jason Cooper <[email protected]>
2015-03-29irqchip: gicv3-its: Fix encoding of collection's target redistributorMarc Zyngier1-1/+1
With a monolithic GICv3, redistributors are addressed using a linear number, while a distributed implementation uses physical addresses. When encoding a target address into a command, we strip the lower 16 bits, as redistributors are always 64kB aligned. This works perfectly well with a distributed implementation, but has the silly effect of always encoding target 0 in the monolithic case (unless you have more than 64k CPUs, of course). The obvious fix is to shift the linear target number by 16 when computing the target address, so that we don't loose any precious bit. Reported-by: Andre Przywara <[email protected]> Tested-by: Andre Przywara <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Jason Cooper <[email protected]>
2015-03-29Merge branch 'cxgb4'David S. Miller3-22/+101
Hariprasad Shenai says: ==================== cxgb4: Fixes ingress queue mapping and other fixes The below series fixes ingress queue mapping by allocating them dynamically to prevent stack overflow. Disable napi and interrupts before unregistering netdev to avoid crash while unloading driver when traffic is flowing. The patches series is created against 'net' tree. And includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <[email protected]>
2015-03-29cxgb4: Disable interrupts and napi before unregistering netdevHariprasad Shenai1-7/+18
Disable interrupts and quiesce rx before unregistering net device to avoid crash while unloading driver when traffic is flowing through. Based on original work by Shameem Khalid <[email protected]> Signed-off-by: Hariprasad Shenai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-29cxgb4: Allocate dynamic mem. for egress and ingress queue mapsHariprasad Shenai3-15/+83
QIDs (egress/ingress) from firmware in FW_*_CMD.alloc command can be anywhere in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END. For eg, in the first load eqid can be from 100 to 300. In the next load it can be from 301 to 500 (assume eq_start is 100 and eq_end is 1000). The driver was assuming them to always start from EQ(IQFLINT)_START till MAX_EGRQ(INGQ). This was causing stack overflow and subsequent crash. Fixed it by dynamically allocating memory (of qsize (x_END - x_START + 1)) for these structures. Based on original work by Santosh Rastapur <[email protected]> Signed-off-by: Hariprasad Shenai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-29ipmr,ip6mr: call ip6mr_free_table() on failure pathWANG Cong2-2/+2
Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-29usbnet: Fix tx_bytes statistic running backward in cdc_ncmBen Hutchings5-11/+22
cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Bjørn Mork <[email protected]>
2015-03-29usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings5-3/+20
Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <[email protected]> Tested-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-29spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/messageMartin Sperl1-0/+16
To reduce the number of interrupts/message we fill the FIFO before enabling interrupts - for short messages this reduces the interrupt count from 2 to 1 interrupt. There have been rare cases where short (<200ns) chip-select switches with native CS have been observed during such operation, this is why this optimization is only enabled for GPIO-CS. Signed-off-by: Martin Sperl <[email protected]> Tested-by: Martin Sperl <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-03-29spi: bcm2835: fix code formatting issueMartin Sperl1-2/+1
Signed-off-by: Martin Sperl <[email protected]> Tested-by: Martin Sperl <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-03-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix x86 syscall exit code bug that resulted in spurious non-execution of TIF-driven user-return worklets, causing big trouble for things like KVM that rely on user notifiers for correctness of their vcpu model, causing crashes like double faults" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/entry: Check for syscall exit work with IRQs disabled
2015-03-28Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds3-9/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Two clocksource driver fixes, and an idle loop RCU warning fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock() clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
2015-03-28Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "A single sched/rt corner case fix for RLIMIT_RTIME correctness" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix RLIMIT_RTTIME when PI-boosting to RT
2015-03-28Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A perf kernel side fix for a fuzzer triggered lockup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix irq_work 'tail' recursion
2015-03-28Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds2-30/+59
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "A module unload lockdep race fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix the module unload key range freeing logic
2015-03-28Merge branch 'parisc-4.0-1' of ↵Linus Torvalds2-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parsic fixes from Helge Deller: "One patch from Mikulas fixes a bug on parisc by artifically incrementing the counter in pmd_free when the kernel tries to free the preallocated pmd. Other than that we now prevent that syscalls gets added without incrementing __NR_Linux_syscalls and fix the initial pmd setup code if a default page size greater than 4k has been selected" * 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT parisc: mm: don't count preallocated pmds parisc: Add compile-time check when adding new syscalls
2015-03-28Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-4/+5
Pull kvm ppc bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix instruction emulation KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
2015-03-28Merge tag 'arc-4.0-fixes-part-2' of ↵Linus Torvalds1-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "We found some issues with signal handling taking down the system. I know its late, but these are important and all marked for stable. ARC signal handling related fixes uncovered during recent testing of NPTL tools" * tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: signal handling robustify ARC: SA_SIGINFO ucontext regs off-by-one
2015-03-28Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull selinux bugfix from James Morris. Fix broken return value. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix sel_write_enforce broken return value
2015-03-28iio: imu: Use iio_trigger_get for indio_dev->trig assignmentDarshana Padmadas1-1/+1
This patch uses iio_trigger_get to increment the reference count of trigger device, to avoid incorrect assignment. Can result in a null pointer dereference during removal if the trigger has been changed before removal. This patch refers to a similar situation encountered through the following discussion: http://www.spinics.net/lists/linux-iio/msg13669.html Signed-off-by: Darshana Padmadas <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2015-03-28iio: adc: vf610: use ADC clock within specificationStefan Agner1-30/+61
Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by: Stefan Agner <[email protected]> Acked-by: Fugang Duan <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2015-03-28iio/adc/cc10001_adc.c: Fix !HAS_IOMEM buildRichard Weinberger1-1/+2
Fixes: drivers/built-in.o: In function `cc10001_adc_probe': cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2015-03-27drivers/of: Add empty ranges quirk for PA-SemiBenjamin Herrenschmidt1-3/+8
The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Grant Likely <[email protected]> Cc: Stable <[email protected]> # v3.18+
2015-03-27spi: spidev: Warn loudly if instantiated from DT as "spidev"Mark Brown1-7/+19
Since spidev is a detail of how Linux controls a device rather than a description of the hardware in the system we should never have a node described as "spidev" in DT, any SPI device could be a spidev so this is just not a useful description. In order to help prevent users from writing such device trees generate a warning if spidev is instantiated as a DT node without an ID in the match table. Signed-off-by: Mark Brown <[email protected]>
2015-03-27Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2-5/+5
Pull watchdog fixes from Wim Van Sebroeck: - mtk_wdt: signedness bug in mtk_wdt_start() - imgpdc: Fix NULL pointer dereference during probe and fix the default heartbeat * git://www.linux-watchdog.org/linux-watchdog: watchdog: imgpdc: Fix default heartbeat watchdog: imgpdc: Fix probe NULL pointer dereference watchdog: mtk_wdt: signedness bug in mtk_wdt_start()
2015-03-27Merge tag 'sound-4.0-rc6' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Three trivial oneliner fixes for HD-audio. Two are device-specific quirks while one is a generic fix for recent Realtek codecs" * tag 'sound-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add one more node in the EAPD supporting candidate list ALSA: hda_intel: apply the Seperate stream_tag for Sunrise Point ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)
2015-03-27libata: Blacklist queued TRIM on Samsung SSD 850 ProMartin K. Petersen1-0/+2
Blacklist queued TRIM on this drive for now. Reported-by: Stefan Keller <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> CC: [email protected] Signed-off-by: Tejun Heo <[email protected]>
2015-03-27libata: Update Crucial/Micron blacklistMartin K. Petersen1-2/+11
Micron has released an updated firmware (MU02) for M510/M550/MX100 drives to fix the issues with queued TRIM. Queued TRIM remains broken on M500 but is working fine on later drives such as M600 and MX200. Tweak our blacklist to reflect the above. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71371 Signed-off-by: Martin K. Petersen <[email protected]> Cc: [email protected] Signed-off-by: Tejun Heo <[email protected]>
2015-03-27drm/radeon: programm the VCE fw BAR as wellChristian König2-0/+4
Otherwise the VCE firmware needs to be in the first 256MB of VRAM. Signed-off-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-03-27drm/radeon: always dump the ring content if it's availableChristian König1-1/+1
Dumping is still possible if a ring isn't ready, only when it isn't allocated at all we need to abort here. Signed-off-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2015-03-27radeon: Do not directly dereference pointers to BIOS area.David Miller1-3/+7
Use readb() and memcpy_fromio() accessors instead. Reviewed-by: Christian König <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2015-03-27drm/radeon/dpm: fix 120hz handling harderAlex Deucher2-5/+18
Need to expand the check to handle short circuiting if the selected state is the same as current state. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87796 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2015-03-27drm/edid: set ELD for firmware and debugfs override EDIDsJani Nikula2-0/+2
If the user supplies EDID through firmware or debugfs override, the driver callbacks are bypassed and the connector ELD does not get updated, and audio fails. Set ELD for firmware and debugfs EDIDs too. There should be no harm in gratuitously doing this for non HDMI/DP connectors, as it's still up to the driver to use the ELD, if any. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82349 Reference: https://bugs.freedesktop.org/show_bug.cgi?id=80691 Reported-by: Emil <[email protected]> Reported-by: Rob Engle <[email protected]> Tested-by: Jolan Luff <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Jani Nikula <[email protected]>
2015-03-27locks: fix file_lock deletion inside loopYan, Zheng1-3/+2
locks_delete_lock_ctx() is called inside the loop, so we should use list_for_each_entry_safe. Fixes: 8634b51f6ca2 (locks: convert lease handling to file_lock_context) Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Jeff Layton <[email protected]>
2015-03-27firmware: dmi_scan: Prevent dmi_num integer overflowJean Delvare1-15/+7
dmi_num is a u16, dmi_len is a u32, so this construct: dmi_num = dmi_len / 4; would result in an integer overflow for a DMI table larger than 256 kB. I've never see such a large table so far, but SMBIOS 3.0 makes it possible so maybe we'll see such tables in the future. So instead of faking a structure count when the entry point does not provide it, adjust the loop condition in dmi_table() to properly deal with the case where dmi_num is not set. This bug was introduced with the initial SMBIOS 3.0 support in commit fc43026278b2 ("dmi: add support for SMBIOS 3.0 64-bit entry point"). Signed-off-by: Jean Delvare <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Ivan Khoronzhuk <[email protected]> Cc: <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Matt Fleming <[email protected]>
2015-03-27gpio: syscon: reduce message level when direction reg offset not in dtGrygorii Strashko1-1/+1
Now GPIO syscon driver produces bunch of warnings during the boot of Kesytone 2 SoCs: gpio-syscon soc:keystone_dsp_gpio@02620240: can't read the dir register offset! gpio-syscon soc:keystone_dsp_gpio@2620244: can't read the dir register offset! This message unintentionally was added using dev_err(), but its actual log level is debug, because third cell of "ti,syscon-dev" is optional. Hence change it to dev_dbg() as it should be. This patch fixes commit: 5a3e3f8 ("gpio: syscon: retriave syscon node and regs offsets from dt") Reported-by: Russell King <[email protected]> Tested-by: Murali Karicheri <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-03-27Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris1-1/+1
into for-linus
2015-03-27watchdog: imgpdc: Fix default heartbeatJames Hogan1-3/+3
The IMG PDC watchdog driver heartbeat module parameter has no default so it is initialised to zero. This results in the following warning during probe: imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout The module parameter description implies that the default value should be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that. Also tweak the heartbeat module parameter description for consistency. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <[email protected]> Cc: Ezequiel Garcia <[email protected]> Cc: Naidu Tellapati <[email protected]> Cc: Jude Abraham <[email protected]> Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-03-27watchdog: imgpdc: Fix probe NULL pointer dereferenceJames Hogan1-1/+1
The IMG PDC watchdog probe function calls pdc_wdt_stop() prior to watchdog_set_drvdata(), causing a NULL pointer dereference when pdc_wdt_stop() retrieves the struct pdc_wdt_dev pointer using watchdog_get_drvdata() and reads the register base address through it. Fix by moving the watchdog_set_drvdata() call earlier, to where various other pdc_wdt->wdt_dev fields are initialised. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <[email protected]> Cc: Ezequiel Garcia <[email protected]> Cc: Naidu Tellapati <[email protected]> Cc: Jude Abraham <[email protected]> Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-03-27watchdog: mtk_wdt: signedness bug in mtk_wdt_start()Dan Carpenter1-1/+1
"ret" should be signed for the error handling to work correctly. This doesn't matter much in real life since mtk_wdt_set_timeout() always succeeds. Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2015-03-26spi: bcm2835: move to the transfer_one driver modelMartin Sperl1-88/+124
This also allows for GPIO-CS to get used removing the limitation of 2/3 SPI devises on the SPI bus. Fixes: spi-cs-high with native CS with multiple devices on the spi-bus resetting the chip selects to "normal" polarity after a finished transfer. No other functionality/improvements added. Tested with the following 4 devices on the spi-bus: * mcp2515 with native CS * mcp2515 with gpio CS * fb_st7735r with native CS (plus spi-cs-high via transistor inverting polarity) * enc28j60 with gpio-CS Tested-by: Martin Sperl <[email protected]> Signed-off-by: Martin Sperl <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-03-26Merge tag 'v4.0-rc5' into spi-bcm2835Mark Brown953-6271/+10261
Linux 4.0-rc5
2015-03-26spi/rockchip: Add device tree property to configure Rx Sample DelayJulius Werner2-0/+25
We have found that we can sometimes see read failures on boards with high-capacitance SPI lines. It seems that the controller samples the Rx data line too early, and its register interface has an "Rx Sample Delay" setting to fine-tune against this issue. This patch adds a new optional device tree entry that can configure this delay in terms of nanoseconds. The kernel will calculate the best-fitting amount of parent clock ticks to program the controller with based on that. Signed-off-by: Julius Werner <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-03-26spi/rockchip: Round up clock rate divisor to err on the safe sideJulius Werner1-1/+1
The Rockchip SPI driver currently calculates its clock rate divisor by integer dividing the parent rate by the target rate, and then rounding the result up to the next even number (since the divisor must be even). Clock rate divisors should always be rounded up, so that the resulting frequency is lower or equal to the target. This is correctly done in the second step here but not in the first, so we still have a risk of exceeding the desired target frequency (e.g. setting spi-max-frequency to 40000000 with a parent clock of 99000000 could lead to a divisor of 99000000 / 40000000 == 2 (which is even) that then results in an effective frequency of 99000000 / 2 == 49500000 (potentially exceeding the flash chip's specifications). This patch changes the division to round up to fix this problem. Signed-off-by: Julius Werner <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-03-26tty: serial: fsl_lpuart: clear receive flag on FIFO flushStefan Agner1-0/+3
When the receiver was enabled during startup, a character could have been in the FIFO when the UART get initially used. The driver configures the (receive) watermark level, and flushes the FIFO. However, the receive flag (RDRF) could still be set at that stage (as mentioned in the register description of UARTx_RWFIFO). This leads to an interrupt which won't be handled properly in interrupt mode: The receive interrupt function lpuart_rxint checks the FIFO count, which is 0 at that point (due to the flush during initialization). The problem does not manifest when using DMA to receive characters. Fix this situation by explicitly read the status register, which leads to clearing of the RDRF flag. Due to the flush just after the status flag read, a explicit data read is not to required. Signed-off-by: Stefan Agner <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-03-26tty: serial: fsl_lpuart: specify transmit FIFO sizeStefan Agner1-0/+2
Specify transmit FIFO size which might be different depending on LPUART instance. This makes sure uart_wait_until_sent in serial core getting called, which in turn waits and checks if the FIFO is really empty on shutdown by using the tx_empty callback. Without the call of this callback, the last several characters might not yet be transmitted when closing the serial port. This can be reproduced by simply using echo and redirect the output to a ttyLP device. Signed-off-by: Stefan Agner <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-03-26serial: samsung: Clear operation mode on UART shutdownJavier Martinez Canillas1-0/+1
Exynos serial ports operate either in a DMA-based or interrupt-based modes. In DMA-based mode, the UART generates a transfer data request and a Transmission (Tx) interrupt in interrupt-based mode. The Tx IRQ is only unmasked in interrupt-based mode and it was done in s3c24xx_serial_start_tx(). Commit ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") removed the IRQ enable on that function since it is enabled when the mode is set in enable_tx_pio(). The problem is that enable_tx_pio() is only called if the port mode has not been set before but the mode was not cleared on .shutdown(). So if the UART was shutdown and then started up again, the mode set will remain and the Tx IRQ won't be unmasked. This caused a hang on at least Exynos5250, Exynos5420 and Exynos5800 when the system is rebooted or powered off. Fixes: ba019a3e2ad5 ("serial: samsung: remove redundant interrupt enabling") Signed-off-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-03-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-34/+35
Pull drm refcounting fixes from Dave Airlie: "Here is the complete set of i915 bug/warn/refcounting fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fixup legacy plane->crtc link for initial fb config drm/i915: Fix atomic state when reusing the firmware fb drm/i915: Keep ring->active_list and ring->requests_list consistent drm/i915: Don't try to reference the fb in get_initial_plane_config() drm: Fixup racy refcounting in plane_force_disable
2015-03-26Merge tag 'dm-4.0-fix-2' of ↵Linus Torvalds1-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix DM core device cleanup regression -- due to a latent race that was exposed by the bdi changes that were introduced during the 4.0 merge" * tag 'dm-4.0-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix add_disk() NULL pointer due to race with free_dev()
2015-03-26Merge tag 'linux-kselftest-4.0-rc6' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan. * tag 'linux-kselftest-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix build failures when invoked from kselftest target
Powered by cgit, Gruvboxed by Blaster4385.