aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-08-31drm/radeon/ttm: don't store driver copy of device pointer.Dave Airlie1-4/+4
This can be gotten back from bdev. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-3-airlied@gmail.com
2020-08-31drm/amdgpu/ttm: remove unused parameter to move blitDave Airlie1-4/+4
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-2-airlied@gmail.com
2020-08-30drm/hisilicon: Removed the dependency on the mmuTian Tao1-1/+1
hibmc can only be used in ARM64 architectures, and mmu defaults to y in arch/arm64/Kconfig, so there is no need to add a dependency on mmu in hibmc's kconfig. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1598428528-49046-1-git-send-email-tiantao6@hisilicon.com
2020-08-30drm/vkms: avoid warning in vkms_get_vblank_timestampSidong Yang1-0/+5
This patch avoid the warning in vkms_get_vblank_timestamp when vblanks aren't enabled. When running igt test kms_cursor_crc just after vkms module, the warning raised like below. Initial value of vblank time is zero and hrtimer.node.expires is also zero if vblank aren't enabled before. vkms module isn't real hardware but just virtual hardware module. so vkms can't generate a resonable timestamp when hrtimer is off. it's best to grab the current time. [106444.464503] [IGT] kms_cursor_crc: starting subtest pipe-A-cursor-size-change [106444.471475] WARNING: CPU: 0 PID: 10109 at vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471511] CPU: 0 PID: 10109 Comm: kms_cursor_crc Tainted: G W OE 5.9.0-rc1+ #6 [106444.471514] RIP: 0010:vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471528] Call Trace: [106444.471551] drm_get_last_vbltimestamp+0xb9/0xd0 [drm] [106444.471566] drm_reset_vblank_timestamp+0x63/0xe0 [drm] [106444.471579] drm_crtc_vblank_on+0x85/0x150 [drm] [106444.471582] vkms_crtc_atomic_enable+0xe/0x10 [vkms] [106444.471592] drm_atomic_helper_commit_modeset_enables+0x1db/0x230 [drm_kms_helper] [106444.471594] vkms_atomic_commit_tail+0x38/0xc0 [vkms] [106444.471601] commit_tail+0x97/0x130 [drm_kms_helper] [106444.471608] drm_atomic_helper_commit+0x117/0x140 [drm_kms_helper] [106444.471622] drm_atomic_commit+0x4a/0x50 [drm] [106444.471629] drm_atomic_helper_set_config+0x63/0xb0 [drm_kms_helper] [106444.471642] drm_mode_setcrtc+0x1d9/0x7b0 [drm] [106444.471654] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471666] drm_ioctl_kernel+0xb6/0x100 [drm] [106444.471677] drm_ioctl+0x3ad/0x470 [drm] [106444.471688] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471692] ? tomoyo_file_ioctl+0x19/0x20 [106444.471694] __x64_sys_ioctl+0x96/0xd0 [106444.471697] do_syscall_64+0x37/0x80 [106444.471699] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Signed-off-by: Sidong Yang <realwakka@gmail.com> Reviewed-by: Melissa Wen <melissa.srw@gmail.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828124553.2178-1-realwakka@gmail.com
2020-08-30drm/vkms: add alpha-premultiplied color blendingMelissa Wen1-16/+39
The VKMS blend function was ignoring the alpha channel and just overwriting vaddr_src with vaddr_dst. This XRGB approach triggers a warning when running the kms_cursor_crc/cursor-alpha-transparent test case. In IGT, cairo_format_argb32 uses premultiplied alpha (according to documentation). Also current DRM assumption is that alpha is premultiplied. Therefore, this patch considers premultiplied alpha blending eq to compose vaddr_src with vaddr_dst. This change removes the following cursor-alpha-transparent warning: "Suspicious CRC: All values are 0." V2: - static for local functions - const for the read-only variable argb_src - replaces variable names - drops unnecessary comment Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200825114532.abzdooluny2ekzvm@smtp.gmail.com
2020-08-30drm: panel: Fix bpc for OrtusTech COM43H4M85ULC panelLaurent Pinchart1-1/+1
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
2020-08-29drm/bridge: Fix the dsi remote end-pointsVinod Koul1-2/+2
DSI end-points are supposed to be at node 0 and node 1 as per binding. So fix this and use node 0 and node 1 for dsi. Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
2020-08-29drm/panel: rm67191: Remove CLOCK_NON_CONTINUOUS flagRobert Chiras1-2/+1
The flag MIPI_DSI_CLOCK_NON_CONTINUOUS was wrong used in the DSI driver, so it was added to this panel, but not necessary. So, remove this flag since it is not needed. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1598626713-5595-1-git-send-email-robert.chiras@oss.nxp.com
2020-08-29drm/panel: simple: Add AM-1280800N3TZQW-T00HJagan Teki1-0/+29
Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-2-jagan@amarulasolutions.com
2020-08-29dt-bindings: display: simple: Add AM-1280800N3TZQW-T00HJagan Teki1-0/+2
Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd. as part of panel-simple. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-1-jagan@amarulasolutions.com
2020-08-27drm/sun4i: lvds: Invert the LVDS polarityMaxime Ripard1-3/+1
The LVDS controller can invert the polarity / lanes of the LVDS output. The default polarity causes some issues on some panels. However, U-Boot has always used the opposite polarity without any reported issue, and the only currently supported LVDS panel in-tree (the TBS A711) seems to be able to work with both settings. Let's just use the same polarity than U-Boot to be more consistent and hopefully support all the panels. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Cc: Ondrej Jirman <megous@megous.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200704133803.37330-1-maxime@cerno.tech
2020-08-27drm/mgag200: fix spelling mistake "expeced" -> "expected"Colin Ian King1-1/+1
There is a spelling mistake in a drm_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200826084727.42703-1-colin.king@canonical.com
2020-08-26drm/bridge: ps8640: Print an error if VDO control failsEnric Balletbo i Serra1-7/+6
Print an error message inside ps8640_bridge_vdo_control() function when it fails so we can simplify a bit the callers, they will only need to check the error code. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-5-enric.balletbo@collabora.com
2020-08-26drm/bridge: ps8640: Return an error for incorrect attach flagsEnric Balletbo i Serra1-0/+4
Bridge drivers that implement the new model only shall return an error from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not set. So make sure we return an error because only the new drm_bridge model is supported. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-4-enric.balletbo@collabora.com
2020-08-26drm/bridge: ps8640: Get the EDID from eDP controlEnric Balletbo i Serra1-0/+12
The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the .get_edid callback and set the flag to indicate the core to use it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-3-enric.balletbo@collabora.com
2020-08-26drm/bridge_connector: Set default status connected for eDP connectorsEnric Balletbo i Serra1-0/+1
In an eDP application, HPD is not required and on most bridge chips useless. If HPD is not used, we need to set initial status as connected, otherwise the connector created by the drm_bridge_connector API remains in an unknown state. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-2-enric.balletbo@collabora.com
2020-08-25drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_drvTian Tao1-12/+12
Use drm_err instead of DRM_ERROR in hibmc_drm_drv Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-5-git-send-email-tiantao6@hisilicon.com
2020-08-25drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_deTian Tao1-7/+7
Use drm_err instead of DRM_ERROR in hibmc_drm_de Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-4-git-send-email-tiantao6@hisilicon.com
2020-08-25drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_vdacTian Tao1-2/+2
Use drm_err instead of DRM_ERROR in hibmc_drm_vdac Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-3-git-send-email-tiantao6@hisilicon.com
2020-08-25drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_ttmTian Tao1-1/+1
Use drm_err instead of DRM_ERROR in hibmc_ttm. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-2-git-send-email-tiantao6@hisilicon.com
2020-08-24drm/ttm: drop bus.size from bus placement.Dave Airlie4-9/+10
This is always calculated the same, and only used in a couple of places. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-2-airlied@gmail.com
2020-08-24drm/ttm: init mem->bus in common code.Dave Airlie7-36/+5
The drivers all do the same thing here. Reviewed-by: Christian König <christian.koenig@amd.com> for both. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-1-airlied@gmail.com
2020-08-23drm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctlyNadezda Lutovinova1-2/+10
If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr, then a null pointer dereference is accessed. The patch adds checking of the return value of ge_b850v3_lvds_init(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru
2020-08-23drm/bridge/tc358775: Fix for PTR_ERRVinay Simha BN1-1/+1
passing zero to 'PTR_ERR' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1597557042-5154-1-git-send-email-simhavcs@gmail.com
2020-08-21drm: panel: simple: Add KD116N21-30NV-A010Douglas Anderson1-0/+31
Values come from the vendor and have been tested on hardware. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.2.Idf25356dff4b36c62704188c3e3d39a2010d6f6a@changeid
2020-08-21dt-bindings: display: simple: Add KD116N21-30NV-A010 compatibleDouglas Anderson1-0/+2
The KD116N21-30NV-A010 is a pretty standard eDP panel. Add it to the list of compatible strings. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.1.I61e6248813d797c9eeebfbb7019c713aa71c4419@changeid
2020-08-21drm/tidss: implement WA for AM65xx erratum i2000Tomi Valkeinen2-4/+32
This patch implements WA for AM65xx erratum i2000, which causes YUV formats to show wrong colors. An earlier patch removed a partial WA: a8d9d7da1546349f18eb2d6b6b3a04bdeb38719d ("drm/tidss: remove AM65x PG1 YUV erratum code") The patch explains the reasoning for removal. The change in plans has been that it has become clear that there are and will be users for PG1 SoCs and as such it's good to implement the WA for PG1s. This patch adds the WA back so that it is only used on SR1.0 (which is the new name for PG1). The previous WA code didn't check the SoC revision, which this patch does. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200812112625.59897-1-tomi.valkeinen@ti.com Reviewed-by: Jyri Sarha <jsarha@ti.com>
2020-08-21drm/omap: fix spelling mistake "propert" -> "property"Colin Ian King1-1/+1
There is a spelling mistake in a pr_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805102015.14891-1-colin.king@canonical.com
2020-08-21drm: omapdrm: Delete surplus GPIO includesLinus Walleij2-2/+0
The OMAP DRM driver includes <linux/gpio.h> into the two hdmi4.c and hdmi5.c files but does not use any symbols from these files. Drop the includes. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200626220606.340937-1-linus.walleij@linaro.org
2020-08-20drm/panel: novatek,nt39016: Remove 'dev' field in priv structPaul Cercueil1-6/+4
There is already a 'struct device' pointer in the drm_panel structure, that we can access easily from our priv structure, so there's no need for a separate 'dev' field there. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
2020-08-20drm/panel: novatek,nt39016: Reorder calls in probePaul Cercueil1-3/+3
The drm_panel_of_backlight() function must be called after drm_panel_init(), according to the function's documentation; otherwise the backlight won't be properly initialized. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
2020-08-20drm/ttm: fix broken merge between drm-next and drm-misc-nextChristian König2-2/+4
drm-next reverted the changes to ttm_tt_create() to do the NULL check inside the function, but drm-misc-next adds new users of this approach. Re-apply the NULL check change inside the function to fix this. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/386628/
2020-08-19drm/gma500: fix error checkTom Rix1-1/+1
Reviewing this block of code in cdv_intel_dp_init() ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ... cdv_intel_edp_panel_vdd_off(gma_encoder); if (ret == 0) { /* if this fails, presume the device is a ghost */ DRM_INFO("failed to retrieve link info, disabling eDP\n"); drm_encoder_cleanup(encoder); cdv_intel_dp_destroy(connector); goto err_priv; } else { The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure. So change to <= Fixes: d112a8163f83 ("gma500/cdv: Add eDP support") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com
2020-08-19drm: gma500: Convert to GPIO descriptorsLinus Walleij6-29/+49
Finalize he conversion of GMA500 to use only GPIO descriptors. The GPIO look-up-table is associated with the device directly in the GMA500 Medfield chip driver since no explicit platform type device (such as in x86/platform/intel-mid) exists: the GMA500 probes directly from the PCI device. Apparently GPIOs 128 and 34 are used on all of these so just go ahead and register those for resetting the DSI pipes. Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703125901.513476-1-linus.walleij@linaro.org
2020-08-19drm: ast: fix double __iomem sparse warningRandy Dunlap1-1/+2
sparse complains about having 2 "__iomem" attributes on the same line where only one is needed since the first one applies to everything up to the ending ';'. However, to make it clear(er) that both of these pointers are "__iomem", use separate lines for them. ../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: warning: duplicate [noderef] ../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: error: multiple address space given: __iomem & __iomem Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/a8185578-a69a-16b0-6fdf-f4e46bc4f61f@infradead.org
2020-08-19virtio: fix build for configs without dma-bufsDavid Stevens4-1/+13
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Stevens <stevensd@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200819031011.310180-1-stevensd@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-18drm/panel: Use dev_ based loggingSam Ravnborg15-345/+200
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
2020-08-18drm/panel: sitronix: Use dev_ based loggingSam Ravnborg2-44/+27
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
2020-08-18drm/panel: raydium: Use dev_ based loggingSam Ravnborg2-28/+23
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
2020-08-18drm/panel: leadtek: Use dev_ based loggingSam Ravnborg2-70/+37
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
2020-08-18drm/panel: samsung: Use dev_ based loggingSam Ravnborg6-36/+21
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org
2020-08-18drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panelGuido Günther4-0/+347
The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/118c6e03dd0ff6e86e495579102cbf7d0cfca6f4.1597652012.git.agx@sigxcpu.org
2020-08-18dt-bindings: Add Mantix MLAF057WE51-X panel bindingsGuido Günther1-0/+70
The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/b84c8c00ee1dcf545903a475872e1ae62b5f43ea.1597652012.git.agx@sigxcpu.org
2020-08-18dt-bindings: vendor-prefixes: Add mantix vendor prefixGuido Günther1-0/+2
Add prefix for Mantix Display Technology Co.,Ltd. Signed-off-by: Guido Günther <agx@sigxcpu.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/b6bcfe27d9393a07a5cdd82fcf211620c774a273.1597652012.git.agx@sigxcpu.org
2020-08-18drm/malidp: Use struct drm_gem_object_funcs.get_sg_table internallyThomas Zimmermann1-1/+1
The malidp driver uses GEM object functions for callbacks. Fix it to use them internally as well. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Fixes: ecdd6474644f ("drm/malidp: Use GEM CMA object functions") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200807111022.12117-1-tzimmermann@suse.de
2020-08-18Merge v5.9-rc1 into drm-misc-nextMaxime Ripard11673-191985/+404886
Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-08-18MAINTAINERS: Change maintainer for hisilicon DRM driverTian Tao1-1/+1
Remove Rongrong Zou and change tiantao as hisilicon DRM maintainer. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: xinliang.liu <xinliang.liu@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1597134186-58423-1-git-send-email-tiantao6@hisilicon.com
2020-08-18drm/sun4i: Constify static structsRikard Falkeborn12-15/+15
A number of static variables are not modified and can be made const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200804215337.54594-1-rikard.falkeborn@gmail.com
2020-08-18drm/virtio: Support virtgpu exported resourcesDavid Stevens5-3/+176
Add support for UUID-based resource sharing mechanism to virtgpu. This implements the new virtgpu commands and hooks them up to dma-buf's get_uuid callback. Signed-off-by: David Stevens <stevensd@chromium.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200818071343.3461203-4-stevensd@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-18virtio-gpu: add VIRTIO_GPU_F_RESOURCE_UUID featureDavid Stevens1-0/+19
This feature allows the guest to request a UUID from the host for a particular virtio_gpu resource. The UUID can then be shared with other virtio devices, to allow the other host devices to access the virtio_gpu's corresponding host resource. Signed-off-by: David Stevens <stevensd@chromium.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200818071343.3461203-3-stevensd@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Powered by cgit, Gruvboxed by Blaster4385.