aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-04-18net: ravb: Count packets instead of descriptors in R-Car RX pathPaul Barker1-13/+8
The units of "work done" in the RX path should be packets instead of descriptors. Descriptors which are used by the hardware to record error conditions or are empty in the case of a DMA mapping error should not count towards our RX work budget. Also make the limit variable unsigned as it can never be negative. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-04-18x86/fred: Fix incorrect error code printout in fred_bad_type()Hou Wenlong1-4/+4
regs->orig_ax has been set to -1 on entry so in the printout, fred_bad_type() should use the passed parameter error_code. Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code") Signed-off-by: Hou Wenlong <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Acked-by: H. Peter Anvin (Intel) <[email protected]> Link: https://lore.kernel.org/r/b2a8f0a41449d25240e314a2ddfbf6549511fb04.1713353612.git.houwenlong.hwl@antgroup.com
2024-04-18x86/fred: Fix INT80 emulation for FREDXin Li (Intel)2-1/+66
Add a FRED-specific INT80 handler and document why it differs from the current one. Eventually, the common bits will be unified once FRED hw is available and it turns out that no further changes are needed but for now, keep the handlers separate for everyone's sanity's sake. [ bp: Zap duplicated commit message, massage. ] Fixes: 55617fb991df ("x86/entry: Do not allow external 0x80 interrupts") Suggested-by: H. Peter Anvin (Intel) <[email protected]> Signed-off-by: Xin Li (Intel) <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-04-18ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9NMauro Carvalho Chehab1-0/+1
The headset mic requires a fixup to be properly detected/used. As a reference, this specific model from 2021 reports the following devices: https://alsa-project.org/db/?f=1a5ddeb0b151db8fe051407f5bb1c075b7dd3e4a Signed-off-by: Mauro Carvalho Chehab <[email protected]> Cc: <[email protected]> Message-ID: <b92a9e49fb504eec8416bcc6882a52de89450102.1713370457.git.mchehab@kernel.org> Signed-off-by: Takashi Iwai <[email protected]>
2024-04-18USB: serial: option: add Rolling RW101-GL and RW135-GL supportVanillan Wang1-0/+8
Update the USB serial option driver support for the Rolling LTE modules. - VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a2: mbim, diag, at, pipe - VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a3: mbim, pipe - VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a4: mbim, diag, at, pipe - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe - VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: MBIM, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a2 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a3 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a4 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0115 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Vanillan Wang <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2024-04-18USB: serial: option: add Lonsung U8300/U9300 productCoia Prant1-0/+4
Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant <[email protected]> Reviewed-by: Lars Melin <[email protected]> [ johan: drop product defines, trim commit message ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2024-04-18ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4Huayu Zhang1-2/+2
change HDA & AMP configuration from ALC287_FIXUP_CS35L41_I2C_2 to ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD for ThinkBook 16P Gen4 models to fix volumn control issue (cannot fully mute). Signed-off-by: Huayu Zhang <[email protected]> Fixes: 6214e24cae9b ("ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops") Message-ID: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2024-04-18ALSA: hda/realtek: Fixes for Asus GU605M and GA403U soundVitalii Torshyn1-2/+38
Added the correct pin table for Asus GU605M and GA403U, enabling all speakers to be controlled with the master. Updated quirks for GU605M and GA403U by including the pin table patch in the chain. Co-developed-by: Luke D. Jones <[email protected]> Signed-off-by: Luke D. Jones <[email protected]> Signed-off-by: Vitalii Torshyn <[email protected]> Message-ID: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2024-04-18ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1Shenghao Ding1-0/+1
Add new vendor_id and subsystem_id to support new Lenovo laptop ThinkPad ICE-1 Signed-off-by: Shenghao Ding <[email protected]> Cc: <[email protected]> Message-ID: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2024-04-17net: ethernet: mtk_eth_soc: fix WED + wifi resetFelix Fietkau1-5/+1
The WLAN + WED reset sequence relies on being able to receive interrupts from the card, in order to synchronize individual steps with the firmware. When WED is stopped, leave interrupts running and rely on the driver turning off unwanted ones. WED DMA also needs to be disabled before resetting. Fixes: f78cd9c783e0 ("net: ethernet: mtk_wed: update mtk_wed_stop") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-17net:usb:qmi_wwan: support Rolling modulesVanillan Wang1-0/+1
Update the qmi_wwan driver support for the Rolling LTE modules. - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-17Merge branch '100GbE' of ↵Jakub Kicinski1-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-16 (ice) This series contains updates to ice driver only. Michal fixes a couple of issues with TC filter parsing; always add match for src_vsi and remove flag check that could prevent addition of valid filters. Marcin adds additional checks for unsupported flower filters. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-17selftests: kselftest_harness: fix Clang warning about zero-length formatJakub Kicinski2-5/+7
Apparently it's more legal to pass the format as NULL, than it is to use an empty string. Clang complains about empty formats: ./../kselftest_harness.h:1207:30: warning: format string is empty [-Wformat-zero-length] 1207 | diagnostic ? "%s" : "", diagnostic); | ^~ 1 warning generated. Reported-by: Sean Christopherson <[email protected]> Link: https://lore.kernel.org/all/[email protected] Fixes: 378193eff339 ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic") Tested-by: Sean Christopherson <[email protected]> Reviewed-by: Muhammad Usama Anjum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-17Merge tag 'for-6.9-rc4-tag' of ↵Linus Torvalds2-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixup in zoned mode for out-of-order writes of metadata that are no longer necessary, this used to be tracked in a separate list but now the old locaion needs to be zeroed out, also add assertions - fix bulk page allocation retry, this may stall after first failure for compression read/write * tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: do not wait for short bulk allocation btrfs: zoned: add ASSERT and WARN for EXTENT_BUFFER_ZONED_ZEROOUT handling btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer
2024-04-17net/sched: Fix mirred deadlock on device recursionEric Dumazet3-0/+8
When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop. Reported-by: Mingshuai Ren <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Fixes: 3bcb846ca4cf ("net: get rid of spin_trylock() in net_tx_action()") Fixes: e578d9c02587 ("net: sched: use counter to break reclassify loops") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Victor Nogueira <[email protected]> Reviewed-by: Pedro Tammela <[email protected]> Tested-by: Jamal Hadi Salim <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-18netfilter: nf_tables: fix memleak in map from abort pathPablo Neira Ayuso1-2/+14
The delete set command does not rely on the transaction object for element removal, therefore, a combination of delete element + delete set from the abort path could result in restoring twice the refcount of the mapping. Check for inactive element in the next generation for the delete element command in the abort path, skip restoring state if next generation bit has been already cleared. This is similar to the activate logic using the set walk iterator. [ 6170.286929] ------------[ cut here ]------------ [ 6170.286939] WARNING: CPU: 6 PID: 790302 at net/netfilter/nf_tables_api.c:2086 nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287071] Modules linked in: [...] [ 6170.287633] CPU: 6 PID: 790302 Comm: kworker/6:2 Not tainted 6.9.0-rc3+ #365 [ 6170.287768] RIP: 0010:nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287886] Code: df 48 8d 7d 58 e8 69 2e 3b df 48 8b 7d 58 e8 80 1b 37 df 48 8d 7d 68 e8 57 2e 3b df 48 8b 7d 68 e8 6e 1b 37 df 48 89 ef eb c4 <0f> 0b 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 0f [ 6170.287895] RSP: 0018:ffff888134b8fd08 EFLAGS: 00010202 [ 6170.287904] RAX: 0000000000000001 RBX: ffff888125bffb28 RCX: dffffc0000000000 [ 6170.287912] RDX: 0000000000000003 RSI: ffffffffa20298ab RDI: ffff88811ebe4750 [ 6170.287919] RBP: ffff88811ebe4700 R08: ffff88838e812650 R09: fffffbfff0623a55 [ 6170.287926] R10: ffffffff8311d2af R11: 0000000000000001 R12: ffff888125bffb10 [ 6170.287933] R13: ffff888125bffb10 R14: dead000000000122 R15: dead000000000100 [ 6170.287940] FS: 0000000000000000(0000) GS:ffff888390b00000(0000) knlGS:0000000000000000 [ 6170.287948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6170.287955] CR2: 00007fd31fc00710 CR3: 0000000133f60004 CR4: 00000000001706f0 [ 6170.287962] Call Trace: [ 6170.287967] <TASK> [ 6170.287973] ? __warn+0x9f/0x1a0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.288104] ? handle_bug+0x3c/0x70 [ 6170.288112] ? exc_invalid_op+0x17/0x40 [ 6170.288120] ? asm_exc_invalid_op+0x1a/0x20 [ 6170.288132] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288243] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288366] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288483] nf_tables_trans_destroy_work+0x588/0x590 [nf_tables] Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-04-17gpiolib: swnode: Remove wrong header inclusionAndy Shevchenko1-1/+0
The flags in the software node properties are supposed to be the GPIO lookup flags, which are provided by gpio/machine.h, as the software nodes are the kernel internal thing and doesn't need to rely to any of ABIs. Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes") Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-04-18bootconfig: Fix the kerneldoc of _xbc_exit()Masami Hiramatsu (Google)1-1/+2
Fix the kerneldoc of _xbc_exit() which is updated to have an @early argument and the function name is changed. Link: https://lore.kernel.org/all/171321744474.599864.13532445969528690358.stgit@devnote2/ Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: 89f9a1e876b5 ("bootconfig: use memblock_free_late to free xbc memory to buddy") Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2024-04-17Merge tag 'pwm/for-6.9-rc5-fixes' of ↵Linus Torvalds4-32/+66
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm fixes from Uwe Kleine-König: "The first patch fixes a regression in the suspend/resume path for the dwc pwm driver that was introduced in v6.9-rc1 when support for 16 channel devices was added. The second patch fixes a bunch of device tree binding check warnings" * tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property pwm: dwc: allow suspend/resume for 16 channels
2024-04-17drm/panel: simple: Add Innolux G121XCE-L01 LVDS display supportMarek Vasut1-0/+21
G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 4:3, 1024(H) x 768(V) screen and either 262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit. All input signals are LVDS interface compatible. Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are effectively identical panels, use the former as RGB 6-bits variant and add the later as RGB 8-bits variant. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf [2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf Signed-off-by: Marek Vasut <[email protected]> Acked-by: Jessica Zhang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-04-17drm/panel: simple: Convert Innolux G121X1-L03 to display_timingMarek Vasut1-13/+13
Use display_timing instead of drm_display_mode to define a range of possible display timings supported by this panel. This makes the panel support more flexible and improves compatibility. No functional change is expected. The settings are picked from documentation [1] section 6.1 INPUT SIGNAL TIMING SPECIFICATIONS. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Signed-off-by: Marek Vasut <[email protected]> Acked-by: Jessica Zhang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-04-17drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connectorMarek Vasut1-0/+3
The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , add the missing bus_format. Add missing connector type and bus_flags as well. Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is capable of both RGB 18bit/24bit panel, the current configuration uses 18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6. Support for the 24bit mode would require another entry in panel-simple with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which is out of scope of this fix. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03") Signed-off-by: Marek Vasut <[email protected]> Acked-by: Jessica Zhang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-04-17dt-bindings: display: simple: Document support for Innolux G121XCE-L01Marek Vasut1-0/+2
Document support for Innolux CheMei 12" G121XCE-L01 XGA LVDS display. G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 4:3, 1024(H) x 768(V) screen and either 262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit. All input signals are LVDS interface compatible. Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are effectively identical panels, use the former as RGB 6-bits variant and document the later as RGB 8-bits variant. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf [2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf Signed-off-by: Marek Vasut <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-04-17x86/retpolines: Enable the default thunk warning only on relevant configsBorislav Petkov (AMD)1-0/+7
The using-default-thunk warning check makes sense only with configurations which actually enable the special return thunks. Otherwise, it fires on unrelated 32-bit configs on which the special return thunks won't even work (they're 64-bit only) and, what is more, those configs even go off into the weeds when booting in the alternatives patching code, leading to a dead machine. Fixes: 4461438a8405 ("x86/retpoline: Ensure default return thunk isn't used at runtime") Reported-by: Klara Modin <[email protected]> Reported-by: Erhard Furtner <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Tested-by: Klara Modin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/20240413024956.488d474e@yea
2024-04-17drm/radeon: silence UBSAN warning (v3)Alex Deucher1-5/+5
Convert a variable sized array from [1] to []. v2: fix up a few more. v3: integrate comments from Kees. Reviewed-by: Kees Cook <[email protected]> Tested-by: Jeff Johnson <[email protected]> (v2) Acked-by: Christian König <[email protected]> (v1) Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-04-17drm/radeon: make -fstrict-flex-arrays=3 happyAlex Deucher1-2/+6
The driver parses a union where the layout up through the first array is the same, however, the array has different sizes depending on the elements in the union. Be explicit to fix the UBSAN checker. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323 Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Acked-by: Christian König <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: Kees Cook <[email protected]>
2024-04-17drm/amdgpu: fix visible VRAM handling during faultsChristian König5-57/+53
When we removed the hacky start code check we actually didn't took into account that *all* VRAM pages needs to be CPU accessible. Clean up the code and unify the handling into a single helper which checks if the whole resource is CPU accessible. The only place where a partial check would make sense is during eviction, but that is neglitible. Signed-off-by: Christian König <[email protected]> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> CC: [email protected]
2024-04-17drm/amdgpu: validate the parameters of bo mapping operations more clearlyxinhui pan1-26/+46
Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2") Cc: [email protected] Reported-by: Vlad Stolyarov <[email protected]> Suggested-by: Christian König <[email protected]> Signed-off-by: xinhui pan <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-04-17Merge branch 'svm' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini5-67/+57
Clean up SVM's enter/exit assembly code so that it can be compiled without OBJECT_FILES_NON_STANDARD. The "standard" __svm_vcpu_run() can't be made 100% bulletproof, as RBP isn't restored on #VMEXIT, but that's also the case for __vmx_vcpu_run(), and getting "close enough" is better than not even trying. As for SEV-ES, after yet another refresher on swap types, I realized KVM can simply let the hardware restore registers after #VMEXIT, all that's missing is storing the current values to the host save area (they are swap type B). This should provide 100% accuracy when using stack frames for unwinding, and requires less assembly. In between, build the SEV-ES code iff CONFIG_KVM_AMD_SEV=y, and yank out "support" for 32-bit kernels in __svm_sev_es_vcpu_run, which was unnecessarily polluting the code for a configuration that is disabled at build time. Signed-off-by: Paolo Bonzini <[email protected]>
2024-04-17netfilter: nf_tables: restore set elements when delete set failsPablo Neira Ayuso5-20/+45
From abort path, nft_mapelem_activate() needs to restore refcounters to the original state. Currently, it uses the set->ops->walk() to iterate over these set elements. The existing set iterator skips inactive elements in the next generation, this does not work from the abort path to restore the original state since it has to skip active elements instead (not inactive ones). This patch moves the check for inactive elements to the set iterator callback, then it reverses the logic for the .activate case which needs to skip active elements. Toggle next generation bit for elements when delete set command is invoked and call nft_clear() from .activate (abort) path to restore the next generation bit. The splat below shows an object in mappings memleak: [43929.457523] ------------[ cut here ]------------ [43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [...] [43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 [43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246 [43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000 [43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550 [43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f [43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0 [43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002 [43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0 [43929.458114] Call Trace: [43929.458118] <TASK> [43929.458121] ? __warn+0x9f/0x1a0 [43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458188] ? report_bug+0x1b1/0x1e0 [43929.458196] ? handle_bug+0x3c/0x70 [43929.458200] ? exc_invalid_op+0x17/0x40 [43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables] [43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables] [43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables] [43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables] [43929.458512] ? rb_insert_color+0x2e/0x280 [43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables] [43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables] [43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables] [43929.458701] ? __rcu_read_unlock+0x46/0x70 [43929.458709] nft_delset+0xff/0x110 [nf_tables] [43929.458769] nft_flush_table+0x16f/0x460 [nf_tables] [43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-04-17netfilter: nf_tables: missing iterator type in lookup walkPablo Neira Ayuso2-1/+3
Add missing decorator type to lookup expression and tighten WARN_ON_ONCE check in pipapo to spot earlier that this is unset. Fixes: 29b359cf6d95 ("netfilter: nft_set_pipapo: walk over current view on netlink dump") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-04-17s390/mm: Fix NULL pointer dereferenceSven Schnelle1-1/+2
The recently added check to figure out if a fault happened on gmap ASCE dereferences the gmap pointer in lowcore without checking that it is not NULL. For all non-KVM processes the pointer is NULL, so that some value from lowcore will be read. With the current layouts of struct gmap and struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead to any observable bug; at least currently. Fix this by adding the missing NULL pointer check. Fixes: 64c3431808bd ("s390/entry: compare gmap asce to determine guest/host fault") Signed-off-by: Sven Schnelle <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Alexander Gordeev <[email protected]>
2024-04-17Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"Alex Deucher2-7/+5
This reverts commit b5abd7f983e14054593dc91d6df2aa5f8cc67652. This change breaks DSC on 4k monitors at 144Hz over USB-C. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254 Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: Muhammad Ahmed <[email protected]> Cc: Tom Chung <[email protected]> Cc: Charlene Liu <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Harry Wentland <[email protected]> Cc: [email protected]
2024-04-17drm/amdkfd: Fix memory leak in create_process failureFelix Kuehling1-2/+2
Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress. Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable") CC: Xiaogang Chen <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Tested-by: Harish Kasiviswanthan <[email protected]> Reviewed-by: Mukul Joshi <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-04-17drm/amdgpu: remove invalid resource->start check v2Christian König1-4/+0
The majority of those where removed in the commit aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") But this one was missed because it's working on the resource and not the BO. Since we also no longer use a fake start address for visible BOs this will now trigger invalid mapping errors. v2: also remove the unused variable Signed-off-by: Christian König <[email protected]> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") CC: [email protected] Acked-by: Pierre-Eric Pelloux-Prayer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-04-17platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSesMario Limonciello1-0/+9
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still being worked on there is still a possibility that it won't need to apply to future BIOS releases. Add a quirk for BIOS 03.05 as well. Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
2024-04-17drm/edid: make drm_edid_are_equal() more convenient for its single userJani Nikula1-26/+15
Repurpose drm_edid_are_equal() to be more helpful for its single user, and rename drm_edid_eq(). Functionally deduce the length from the blob size, not the blob data, making it more robust against any errors. Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1011a285d30babce3aabd8218abb7ece7dcf58a2.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-04-17drm/edid: make drm_edid_are_equal() staticJani Nikula2-4/+1
drm_edid_are_equal() is only used within drm_edid.c. Make it static. Do not encourage more uses of struct edid. Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/aa79be9a5d0b08c71b82b86b5a8ff0f332e13c6a.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-04-17drm/edid: avoid drm_edid_find_extension() internallyJani Nikula1-2/+12
Prefer the EDID iterators over drm_edid_find_extension() in drm_edid_has_cta_extension(), even if this leads to more code. The key is to use the same patterns as much as possible. Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/9fa366147b06a28304527be48f1b363c3484c8a3.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-04-17drm/edid: rename drm_find_edid_extension() to drm_edid_find_extension()Jani Nikula3-4/+5
Follow the drm_edid_ naming convention. Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/b7a2c2509409de02bbd751541206586424a34725.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-04-17drm/edid: group struct drm_edid based declarations togetherJani Nikula1-4/+4
Keep the declarations for struct drm_edid based functions together. Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/2634de73734dfbf0a772511a80eab966c8206cf2.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-04-17drm/edid: move all internal declarations to drm_crtc_internal.hJani Nikula5-9/+10
The declarations for internal EDID functions are a bit scattered. Put them all in drm_crtc_internal.h. Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/9ae137ea51f9cc2ccb3899b0acda553e6a8ce2db.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-04-17drm/displayid: move drm_displayid.h to drm_displayd_internal.hJani Nikula3-4/+6
There are no exported symbols for displayid, and it's all internal interfaces. Move the header to drivers/gpu/drm/drm_displayd_internal.h. Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/220713d4e3cc364ac103ba689065ae96e075f1fa.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]>
2024-04-17drm/xe/vm: prevent UAF with asid based lookupMatthew Auld1-10/+11
The asid is only erased from the xarray when the vm refcount reaches zero, however this leads to potential UAF since the xe_vm_get() only works on a vm with refcount != 0. Since the asid is allocated in the vm create ioctl, rather erase it when closing the vm, prior to dropping the potential last ref. This should also work when user closes driver fd without explicit vm destroy. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594 Signed-off-by: Matthew Auld <[email protected]> Cc: Matthew Brost <[email protected]> Cc: <[email protected]> # v6.8+ Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 83967c57320d0d01ae512f10e79213f81e4bf594) Signed-off-by: Lucas De Marchi <[email protected]>
2024-04-17drm/xe: Fix bo leak in intel_fb_bo_framebuffer_initMaarten Lankhorst1-2/+6
Add a unreference bo in the error path, to prevent leaking a bo ref. Return 0 on success to clarify the success path. Signed-off-by: Maarten Lankhorst <[email protected]> Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Cc: <[email protected]> # v6.8+ Reviewed-by: Nirmoy Das <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a2f3d731be3893e730417ae3190760fcaffdf549) Signed-off-by: Lucas De Marchi <[email protected]>
2024-04-17s390/ism: Properly fix receive message buffer allocationGerd Bayer1-9/+28
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP anymore, even on archs that may be able to fulfill this. Functionality that relied on the receive buffer being a compound page broke at that point: The SMC-D protocol, that utilizes the ism device driver, passes receive buffers to the splice processor in a struct splice_pipe_desc with a single entry list of struct pages. As the buffer is no longer a compound page, the splice processor now rejects requests to handle more than a page worth of data. Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and create a DMA map for it with dma_map_page(). Since only receive buffers on ISM devices use DMA, qualify the mapping as FROM_DEVICE. Since ISM devices are available on arch s390, only, and on that arch all DMA is coherent, there is no need to introduce and export some kind of dma_sync_to_cpu() method to be called by the SMC-D protocol layer. Analogously, replace dma_free_coherent by a two step dma_unmap_page, then folio_put to free the receive buffer. [1] https://lore.kernel.org/all/[email protected]/ Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent") Signed-off-by: Gerd Bayer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-04-17random: handle creditable entropy from atomic process contextJason A. Donenfeld1-5/+5
The entropy accounting changes a static key when the RNG has initialized, since it only ever initializes once. Static key changes, however, cannot be made from atomic context, so depending on where the last creditable entropy comes from, the static key change might need to be deferred to a worker. Previously the code used the execute_in_process_context() helper function, which accounts for whether or not the caller is in_interrupt(). However, that doesn't account for the case where the caller is actually in process context but is holding a spinlock. This turned out to be the case with input_handle_event() in drivers/input/input.c contributing entropy: [<ffffffd613025ba0>] die+0xa8/0x2fc [<ffffffd613027428>] bug_handler+0x44/0xec [<ffffffd613016964>] brk_handler+0x90/0x144 [<ffffffd613041e58>] do_debug_exception+0xa0/0x148 [<ffffffd61400c208>] el1_dbg+0x60/0x7c [<ffffffd61400c000>] el1h_64_sync_handler+0x38/0x90 [<ffffffd613011294>] el1h_64_sync+0x64/0x6c [<ffffffd613102d88>] __might_resched+0x1fc/0x2e8 [<ffffffd613102b54>] __might_sleep+0x44/0x7c [<ffffffd6130b6eac>] cpus_read_lock+0x1c/0xec [<ffffffd6132c2820>] static_key_enable+0x14/0x38 [<ffffffd61400ac08>] crng_set_ready+0x14/0x28 [<ffffffd6130df4dc>] execute_in_process_context+0xb8/0xf8 [<ffffffd61400ab30>] _credit_init_bits+0x118/0x1dc [<ffffffd6138580c8>] add_timer_randomness+0x264/0x270 [<ffffffd613857e54>] add_input_randomness+0x38/0x48 [<ffffffd613a80f94>] input_handle_event+0x2b8/0x490 [<ffffffd613a81310>] input_event+0x6c/0x98 According to Guoyong, it's not really possible to refactor the various drivers to never hold a spinlock there. And in_atomic() isn't reliable. So, rather than trying to be too fancy, just punt the change in the static key to a workqueue always. There's basically no drawback of doing this, as the code already needed to account for the static key not changing immediately, and given that it's just an optimization, there's not exactly a hurry to change the static key right away, so deferal is fine. Reported-by: Guoyong Wang <[email protected]> Cc: [email protected] Fixes: f5bda35fba61 ("random: use static branch for crng_ready()") Signed-off-by: Jason A. Donenfeld <[email protected]>
2024-04-17serial: stm32: Reset .throttled state in .startup()Uwe Kleine-König1-0/+1
When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: [email protected] Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-04-17serial: stm32: Return IRQ_NONE in the ISR if no handling happendUwe Kleine-König1-2/+10
If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: [email protected] Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-04-17drm/i915/display: tie DMC wakelock to DC5/6 state transitionsLuca Coelho2-0/+11
We only need DMC wakelocks when we allow DC5 and DC6 states. Add the calls to enable and disable DMC wakelock accordingly. Reviewed-by: Uma Shankar <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.