| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The first field in /proc/mounts can be influenced by unprivileged users
through the widespread `fusermount` setuid-root program. Example:
```
user$ mkdir ~/mydebugfs
user$ export _FUSE_COMMFD=0
user$ fusermount ~/mydebugfs -ononempty,fsname=debugfs
user$ grep debugfs /proc/mounts
debugfs /home/user/mydebugfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
```
If there is no debugfs already mounted in the system then this can be
used by unprivileged users to trick kvm_stat into using a user
controlled file system location for obtaining KVM statistics.
Even though the root user is not allowed to access non-root FUSE mounts
for security reasons, the unprivileged user can unmount the FUSE mount
before kvm_stat uses the mounted path. If it wins the race, kvm_stat
will read from the location where the FUSE mount resided.
Note that the files in debugfs are only opened for reading, so the
attacker can cause very large data to be read in by kvm_stat, or fake
data to be processed, but there should be no viable way to turn this
into a privilege escalation.
The fix is simply to use the file system type field instead. Whitespace
in the mount path is escaped in /proc/mounts thus no further safety
measures in the parsing should be necessary to make this correct.
Message-Id: <[email protected]>
Signed-off-by: Matthias Gerstner <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
x86_virt_spec_ctrl only deals with the paravirtualized
MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL
anymore; remove the corresponding, unused argument.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: [email protected]
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: [email protected]
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <[email protected]>
Analyzed-by: Andrew Cooper <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
It is error-prone that code after vmexit cannot access percpu data
because GSBASE has not been restored yet. It forces MSR_IA32_SPEC_CTRL
save/restore to happen very late, after the predictor untraining
sequence, and it gets in the way of return stack depth tracking
(a retbleed mitigation that is in linux-next as of 2022-11-09).
As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to
assembly, essentially undoing commit fb0c4a4fee5a ("KVM: SVM: move
VMLOAD/VMSAVE to C code", 2021-03-15). The reason for that commit was
that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus
VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets
machinery and other related cleanups.
The idea on how to number the exception tables is stolen from
a prototype patch by Peter Zijlstra.
Cc: [email protected]
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Link: <https://lore.kernel.org/all/[email protected]/>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b120249 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value. However, despite existing since the very
first commit of drivers/kvm/svm.c (commit 6aa8b732ca01, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.
Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.
32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.
No functional change intended.
Cc: [email protected]
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in
the way of instructions that hardcode their operands such as RDMSR/WRMSR
or VMLOAD/VMRUN/VMSAVE.
In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep
the pointer to the struct vcpu_svm in %rdi. In particular, it is now
possible to load svm->vmcb01.pa in %rax without clobbering the struct
vcpu_svm pointer.
No functional change intended.
Cc: [email protected]
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.
No functional change intended.
Cc: [email protected]
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This already removes an ugly #include "" from asm-offsets.c, but
especially it avoids a future error when trying to define asm-offsets
for KVM's svm/svm.h header.
This would not work for kernel/asm-offsets.c, because svm/svm.h
includes kvm_cache_regs.h which is not in the include path when
compiling asm-offsets.c. The problem is not there if the .c file is
in arch/x86/kvm.
Suggested-by: Sean Christopherson <[email protected]>
Cc: [email protected]
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
|
|
x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
* Make argument order consistent for kvcalloc()
* Userspace API fixes for DEBUGCTL and LBRs
|
|
Swap the 1st and 2nd arguments to be consistent with the usage of
kvcalloc().
Fixes: c9b8fecddb5b ("KVM: use kvcalloc for array allocations")
Signed-off-by: Liao Chang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
kvm_zap_gfn_range() must be called in an SRCU read-critical section, but
there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This
can lead to the following warning via
kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP
MMU disabled or nesting):
[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904] dump_stack_lvl+0x84/0xaa
[ 1416.659910] dump_stack+0x10/0x15
[ 1416.659913] lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919] kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926] ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935] __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940] kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946] kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955] __se_sys_ioctl+0x77/0xc0
[ 1416.659962] __x64_sys_ioctl+0x1d/0x20
[ 1416.659965] do_syscall_64+0x3d/0x80
[ 1416.659969] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit()
to protect the GFN to memslot translation. The SRCU read lock is not
technically required when no Shadow MMUs are in use, since the TDP MMU
walks the paging structures from the roots and does not need to look up
GFN translations in the memslots, but make the SRCU locking
unconditional for simplicty.
In most cases, the SRCU locking is taken care of in the vCPU run loop,
but when called through other ioctls (such as KVM_SET_GUEST_DEBUG)
there is no srcu_read_lock.
Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear.
Note that the warning is hit in __kvm_zap_rmaps(), so
kvm_memslots_have_rmaps() must return true in order for this to
repro (i.e. the TDP MMU must be off or nesting in use.)
Reported-by: Greg Thelen <[email protected]>
Fixes: 36222b117e36 ("KVM: x86: don't disable APICv memslot when inhibited")
Signed-off-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This mostly handles oddities with the serial port 8250_gsc.c driver.
Although the name suggests it's just for serial ports on the GSC bus
(e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
PCI devices (e.g. on the SuperIO chip) as well.
Thus this renames the driver to 8250_parisc and fixes the config
dependencies.
The other change is a cleanup on how the device IDs of devices in a
PA-RISC machine are shown at startup"
* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid printing the hardware path twice
parisc: Export iosapic_serial_irq() symbol for serial port driver
MAINTAINERS: adjust entry after renaming parisc serial driver
parisc: Use signed char for hardware path in pdc.h
parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
parisc: Make 8250_gsc driver dependend on CONFIG_PARISC
|
|
Pull NFS client bugfixes from Anna Schumaker:
- Fix some coccicheck warnings
- Avoid memcpy() run-time warning
- Fix up various state reclaim / RECLAIM_COMPLETE errors
- Fix a null pointer dereference in sysfs
- Fix LOCK races
- Fix gss_unwrap_resp_integ() crasher
- Fix zero length clones
- Fix memleak when allocate slot fails
* tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs4: Fix kmemleak when allocate slot failed
NFSv4.2: Fixup CLONE dest file size for zero-length count
SUNRPC: Fix crasher in gss_unwrap_resp_integ()
NFSv4: Retry LOCK on OLD_STATEID during delegation return
SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed
NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot
NFSv4.1: Handle RECLAIM_COMPLETE trunking errors
NFSv4: Fix a potential state reclaim deadlock
NFS: Avoid memcpy() run-time warning for struct sockaddr overflows
nfs: Remove redundant null checks before kfree
|
|
Pull rdma fixes from Jason Gunthorpe:
"Fix a few more of the usual sorts of bugs:
- Another regression with source route validation in CMA, introduced
this merge window
- Crash in hfi1 due to faulty list operations
- PCI ID updates for EFA
- Disable LOCAL_INV in hns because it causes a HW hang
- Crash in hns due to missing initialization
- Memory leak in rxe
- Missing error unwind during ib_core module loading
- Missing error handling in qedr around work queue creation during
startup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: clean up work queue on failure in qedr_alloc_resources()
RDMA/core: Fix null-ptr-deref in ib_core_cleanup()
RDMA/rxe: Fix mr leak in RESPST_ERR_RNR
RDMA/hns: Fix NULL pointer problem in free_mr_init()
RDMA/hns: Disable local invalidate operation
RDMA/efa: Add EFA 0xefa2 PCI ID
IB/hfi1: Correctly move list in sc_disable()
RDMA/cma: Use output interface for net_dev check
|
|
Ignore guest CPUID for host userspace writes to the DEBUGCTL MSR, KVM's
ABI is that setting CPUID vs. state can be done in any order, i.e. KVM
allows userspace to stuff MSRs prior to setting the guest's CPUID that
makes the new MSR "legal".
Keep the vmx_get_perf_capabilities() check for guest writes, even though
it's technically unnecessary since the vCPU's PERF_CAPABILITIES is
consulted when refreshing LBR support. A future patch will clean up
vmx_get_perf_capabilities() to avoid the RDMSR on every call, at which
point the paranoia will incur no meaningful overhead.
Note, prior to vmx_get_perf_capabilities() checking that the host fully
supports LBRs via x86_perf_get_lbr(), KVM effectively relied on
intel_pmu_lbr_is_enabled() to guard against host userspace enabling LBRs
on platforms without full support.
Fixes: c646236344e9 ("KVM: vmx/pmu: Add PMU_CAP_LBR_FMT check when guest LBR is enabled")
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Fold vmx_supported_debugctl() into vcpu_supported_debugctl(), its only
caller. Setting bits only to clear them a few instructions later is
rather silly, and splitting the logic makes things seem more complicated
than they actually are.
Opportunistically drop DEBUGCTLMSR_LBR_MASK now that there's a single
reference to the pair of bits. The extra layer of indirection provides
no meaningful value and makes it unnecessarily tedious to understand
what KVM is doing.
No functional change.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Advertise LBR support to userspace via MSR_IA32_PERF_CAPABILITIES if and
only if perf fully supports LBRs. Perf may disable LBRs (by zeroing the
number of LBRs) even on platforms the allegedly support LBRs, e.g. if
probing any LBR MSRs during setup fails.
Fixes: be635e34c284 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Reported-by: Like Xu <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Pull documentation fixes from Jonathan Corbet:
"Four small fixes for the docs tree"
* tag 'docs-6.1-fixes' of git://git.lwn.net/linux:
docs/process/howto: Replace C89 with C11
Documentation: Fix spelling mistake in hacking.rst
Documentation: process: replace outdated LTS table w/ link
tracing/histogram: Update document for KEYS_MAX size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a loop that occurs when using multiple net namespaces
* tag 'nfsd-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix net-namespace logic in __nfsd_file_cache_purge
|
|
If the namespace doesn't match the one in "net", then we'll continue,
but that doesn't cause another rhashtable_walk_next call, so it will
loop infinitely.
Fixes: ce502f81ba88 ("NFSD: Convert the filecache to use rhashtable")
Reported-by: Petr Vorel <[email protected]>
Link: https://lore.kernel.org/ltp/Y1%2FP8gDAcWC%2F+VR3@pevik/
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
"This contains a couple of fixes for string-function bugs"
* tag 'nolibc-urgent.2022.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc/string: Fix memcmp() implementation
tools/nolibc: Fix missing strlen() definition and infinite loop with gcc-12
|
|
With SME we require that fine grained traps on access to TPIDR2_EL0 and
SMPRI_EL1 are disabled but did not document that fact. Add the relevant
register bits.
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
KVM: x86: emulator: update the emulation mode after CR0 write
KVM: x86: emulator: update the emulation mode after rsm
KVM: x86: emulator: introduce emulator_recalc_and_set_mode
KVM: x86: emulator: em_sysexit should update ctxt->mode
KVM: selftests: Mark "guest_saw_irq" as volatile in xen_shinfo_test
KVM: selftests: Add tests in xen_shinfo_test to detect lock races
KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
KVM: Initialize gfn_to_pfn_cache locks in dedicated helper
KVM: VMX: fully disable SGX if SECONDARY_EXEC_ENCLS_EXITING unavailable
KVM: x86: Exempt pending triple fault from event injection sanity check
MAINTAINERS: git://github -> https://github.com for kvm-riscv
KVM: debugfs: Return retval of simple_attr_open() if it fails
KVM: x86: Reduce refcount if single_open() fails in kvm_mmu_rmaps_stat_open()
KVM: x86: Mask off reserved bits in CPUID.8000001FH
KVM: x86: Mask off reserved bits in CPUID.8000001AH
KVM: x86: Mask off reserved bits in CPUID.80000008H
KVM: x86: Mask off reserved bits in CPUID.80000006H
KVM: x86: Mask off reserved bits in CPUID.80000001H
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- fix use after free in exar driver
- spelling fix in comment
* tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog:
drivers: watchdog: exar_wdt.c fix use after free
watchdog: sp805_wdt: fix spelling typo in comment
|
|
The trapping of SMPRI_EL1 and TPIDR2_EL0 currently only really
work on nVHE, as only this mode uses the fine-grained trapping
that controls these two registers.
Move the trapping enable/disable code into
__{de,}activate_traps_common(), allowing it to be called when it
actually matters on VHE, and remove the flipping of EL2 control
for TPIDR2_EL0, which only affects the host access of this
register.
Fixes: 861262ab8627 ("KVM: arm64: Handle SME host state when running guests")
Reported-by: Mark Brown <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes and regression fixes:
- fix a corner case when handling tree-mod-log chagnes in reallocated
notes
- fix crash on raid0 filesystems created with <5.4 mkfs.btrfs that
could lead to division by zero
- add missing super block checksum verification after thawing
filesystem
- handle one more case in send when dealing with orphan files
- fix parameter type mismatch for generation when reading dentry
- improved error handling in raid56 code
- better struct bio packing after recent cleanups"
* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't use btrfs_chunk::sub_stripes from disk
btrfs: fix type of parameter generation in btrfs_get_dentry
btrfs: send: fix send failure of a subcase of orphan inodes
btrfs: make thaw time super block check to also verify checksum
btrfs: fix tree mod log mishandling of reallocated nodes
btrfs: reorder btrfs_bio for better packing
btrfs: raid56: avoid double freeing for rbio if full_stripe_write() failed
btrfs: raid56: properly handle the error when unable to find the missing stripe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM fix from Paul Moore:
"A single patch to the capabilities code to fix a potential memory leak
in the xattr allocation error handling"
* tag 'lsm-pr-20221031' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
capabilities: fix potential memleak on error path from vfs_getxattr_alloc()
|
|
There are two capabilities related to ring-based dirty page tracking:
KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are
supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL
only when the feature is supported on arm64. The userspace doesn't have
to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can
be enabled on arm64 by userspace and it's wrong.
Fix it by double checking if the capability has been advertised prior to
enabling it. It's rejected to enable the capability if it hasn't been
advertised.
Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Reported-by: Sean Christopherson <[email protected]>
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Avoid that the hardware path is shown twice in the kernel log, and clean
up the output of the version numbers to show up in the same order as
they are listed in the hardware database in the hardware.c file.
Additionally, optimize the memory footprint of the hardware database
and mark some code as init code.
Fixes: cab56b51ec0e ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <[email protected]>
Cc: <[email protected]> # v4.9+
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A use-after-free bugfix in the smscufx driver and various minor error
path fixes, smaller build fixes, sysfs fixes and typos in comments in
the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb
drivers"
* tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: cyber2000fb: fix missing pci_disable_device()
fbdev: sisfb: use explicitly signed char
fbdev: smscufx: Fix several use-after-free bugs
fbdev: xilinxfb: Make xilinxfb_release() return void
fbdev: sisfb: fix repeated word in comment
fbdev: gbefb: Convert sysfs snprintf to sysfs_emit
fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit
fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards
fbdev: da8xx-fb: Fix error handling in .remove()
fbdev: MIPS supports iomem addresses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second fix to get
it right.
All of these have been in linux-next with no reported problems"
* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: sgi-gru: use explicitly signed char
coresight: cti: Fix hang in cti_disable_hw()
Revert "coresight: cti: Fix hang in cti_disable_hw()"
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
coresight: cti: Fix hang in cti_disable_hw()
coresight: Fix possible deadlock with lock dependency
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"A few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard work
he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't relevant for
6.1-final, as it is a new feature and people are still reviewing
and modifying it.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Don't set IMI for no_interrupt
usb: dwc3: gadget: Stop processing more requests on IMI
Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
xhci: Remove device endpoints from bandwidth list when freeing the device
xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
xhci: Add quirk to reset host back to default state at shutdown
usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
usb: dwc3: st: Rely on child's compatible instead of name
usb: gadget: uvc: limit isoc_sg to super speed gadgets
usb: bdc: change state when port disconnected
usb: typec: ucsi: acpi: Implement resume callback
usb: typec: ucsi: Check the connection on resume
usb: gadget: aspeed: Fix probe regression
usb: gadget: uvc: fix sg handling during video encode
usb: gadget: uvc: fix sg handling in error case
usb: gadget: uvc: fix dropped frame after missed isoc
usb: dwc3: gadget: Don't delay End Transfer on delayed_status
usb: dwc3: Don't switch OTG -> peripheral if extcon is present
MAINTAINERS: Update maintainers for broadcom USB
MAINTAINERS: move USB gadget and phy entries under the main USB entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change myself to a maintainer
gpio: tegra: Convert to immutable irq chip
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Rename a perf memory level event define to denote it is of CXL type
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
perf/x86/rapl: Add support for Intel Raptor Lake
perf/x86/rapl: Add support for Intel AlderLake-N
perf: Fix missing raw data on tracepoint events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Remove unused kernel stack padding, fix some build errors/warnings and
two bugs in laptop platform driver"
* tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Fix possible UAF and simplify generic_acpi_laptop_init()
platform/loongarch: laptop: Adjust resume order for loongson_hotkey_resume()
LoongArch: BPF: Avoid declare variables in switch-case
LoongArch: Use flexible-array member instead of zero-length array
LoongArch: Remove unused kernel stack padding
|
|
Pull cifs fixes from Steve French:
- use after free fix for reconnect race
- two memory leak fixes
* tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free caused by invalid pointer `hostname`
cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()
cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"One fix from Jean-Philippe Brucker, addressing a regression in which
early boot code on ARM64 would use the non-_early variant of the
arch_get_random family of functions, resulting in the architectural
random number generator appearing unavailable during that early phase
of boot.
The fix simply changes arch_get_random*() to arch_get_random*_early().
This distinction between these two functions is a bit of an old wart
I'm not a fan of, and for 6.2 I'll see if I can make obsolete the
_early variant, so that one function does the right thing in all
contexts without overhead"
* tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: use arch_get_random*_early() in random_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Varions small fixes, all in drivers.
Some of these arrived during the merge window and got held over to
make sure of testing on the -rc tree.
The biggest change is for standards conformance in the target driver,
closely followed by a set of bug fixes in megaraid_sas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: ufs: core: Fix typo in comment
scsi: mpi3mr: Select CONFIG_SCSI_SAS_ATTRS
scsi: ufs: core: Fix typo for register name in comments
scsi: pm80xx: Display proc_name in sysfs
scsi: ufs: core: Fix the error log in ufshcd_query_flag_retry()
scsi: ufs: core: Remove unneeded casts from void *
scsi: lpfc: Fix spelling mistake "unsolicted" -> "unsolicited"
scsi: qla2xxx: Use transport-defined speed mask for supported_speeds
scsi: target: iblock: Fold iblock_emulate_read_cap_with_block_size() into iblock_get_blocks()
scsi: qla2xxx: Fix serialization of DCBX TLV data request
scsi: ufs: qcom: Remove redundant dev_err() call
scsi: megaraid_sas: Move megasas_dbg_lvl init to megasas_init()
scsi: megaraid_sas: Remove unnecessary memset()
scsi: megaraid_sas: Simplify megasas_update_device_list
scsi: megaraid_sas: Correct an error message
scsi: megaraid_sas: Correct value passed to scsi_device_lookup()
scsi: target: core: UA on all LUNs after reset
scsi: target: core: New key must be used for moved PR
scsi: target: core: Abort all preempted regs if requested
scsi: target: core: Fix memory leak in preempt_and_abort
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- make the multipath dma alignment match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
- Initialization fix for requests allocated via the special hw queue
allocator (John)
- Fix for a regression added in this release with the batched
completions of end_io backed requests (Ming)
- Error handling leak fix for rbd (Yang)
- Error handling leak fix for add_disk() failure (Yu)
* tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux:
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
blk-mq: don't add non-pt request with ->end_io to batch
rbd: fix possible memory leak in rbd_sysfs_init()
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
block: fix memory leak for elevator on add_disk failure
|
|
Pull io_uring fix from Jens Axboe:
"Just a fix for a locking regression introduced with the deferred
task_work running from this merge window"
* tag 'io_uring-6.1-2022-10-28' of git://git.kernel.dk/linux:
io_uring: unlock if __io_run_local_work locked inside
io_uring: use io_run_local_work_locked helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport"
* tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
mmap: fix remap_file_pages() regression
mm/shmem: ensure proper fallback if page faults
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
x86: fortify: kmsan: fix KMSAN fortify builds
x86: asm: make sure __put_user_size() evaluates pointer once
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
x86/purgatory: disable KMSAN instrumentation
mm: kmsan: export kmsan_copy_page_meta()
mm: migrate: fix return value if all subpages of THPs are migrated successfully
mm/uffd: fix vma check on userfault for wp
mm: prep_compound_tail() clear page->private
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
mm/page_isolation: fix clang deadcode warning
fs/ext4/super.c: remove unused `deprecated_msg'
ipc/msg.c: fix percpu_counter use after free
memory tier, sysfs: rename attribute "nodes" to "nodelist"
MAINTAINERS: git://github.com -> https://github.com for nilfs2
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a case of rescheduling with user access unlocked, when preempt is
enabled.
- A follow-up fix for a recent fix, which could lead to IRQ state
assertions firing incorrectly.
- Two fixes for lockdep warnings seen when using kfence with the Hash
MMU.
- Two fixes for preempt warnings seen when using the Hash MMU.
- Two fixes for the VAS coprocessor mechanism used on pseries.
- Prevent building some of our older KVM backends when
CONTEXT_TRACKING_USER is enabled, as it's known to cause crashes.
- A couple of fixes for issues seen with PMU NMIs.
Thanks to Nicholas Piggin, Guenter Roeck, Frederic Barrat Haren Myneni,
Sachin Sant, and Samuel Holland.
* tag 'powerpc-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to soft-masked context
powerpc/64s/interrupt: Perf NMI should not take normal exit path
powerpc/64/interrupt: Prevent NMI PMI causing a dangerous warning
KVM: PPC: BookS PR-KVM and BookE do not support context tracking
powerpc: Fix reschedule bug in KUAP-unlocked user copy
powerpc/64s: Fix hash__change_memory_range preemption warning
powerpc/64s: Disable preemption in hash lazy mmu mode
powerpc/64s: make linear_map_hash_lock a raw spinlock
powerpc/64s: make HPTE lock and native_tlbie_lock irq-safe
powerpc/64s: Add lockdep for HPTE lock
powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU
powerpc/pseries/vas: Add VAS IRQ primary handler
|
|
generic_acpi_laptop_init()
Currently the return value of 'sub_driver->init' is not checked. If
sparse_keymap_setup() called in the init function fails, 'generic_
inputdev' is freed, then it will lead a UAF when using it in generic_
acpi_laptop_init(). Fix it by checking the return value and setting
generic_inputdev to NULL after free, so as to avoid double free it.
The error code in generic_subdriver_init() is always negative, so the
return of generic_subdriver_init() can be simplified.
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|
|
Some laptops don't support SW_LID, but still have backlight control,
move backlight resuming before SW_LID event handling so as to avoid
backlight mistake due to early return.
Signed-off-by: Huacai Chen <[email protected]>
|