| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The Rockchip LVDS driver fails to build after commit 23c35f48f5fb
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h and pinctrl/devinfo.h being pulled in by the
device.h header implicitly.
Include these headers explicitly to avoid the build failure.
Cc: Linus Walleij <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fixes: 23c35f48f5fb ("pinctrl: remove include file from <linux/device.h>")
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
No functionality changes.
Signed-off-by: Ravi Bangoria <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Recently, Arnaldo fixed global vs event specific --max-stack usage with
commit bd3dda9ab0fb ("perf trace: Allow overriding global --max-stack
per event"). This commit is having a regression when we don't use
--max-stack at all with perf trace. Ex,
$ ./perf trace record -g ls
$ ./perf trace -i perf.data
0.076 ( 0.002 ms): ls/9109 brk(
0.196 ( 0.008 ms): ls/9109 access(filename: 0x9f998b70, mode: R
0.209 ( 0.031 ms): ls/9109 open(filename: 0x9f998978, flags: CLOEXEC
This is missing call-traces.
After patch:
$ ./perf trace -i perf.data
0.076 ( 0.002 ms): ls/9109 brk(
do_syscall_trace_leave ([kernel.kallsyms])
[0] ([unknown])
syscall_exit_work ([kernel.kallsyms])
brk (/usr/lib64/ld-2.17.so)
_dl_sysdep_start (/usr/lib64/ld-2.17.so)
_dl_start_final (/usr/lib64/ld-2.17.so)
_dl_start (/usr/lib64/ld-2.17.so)
_start (/usr/lib64/ld-2.17.so)
0.196 ( 0.008 ms): ls/9109 access(filename: 0x9f998b70, mode: R
do_syscall_trace_leave ([kernel.kallsyms])
[0] ([unknown])
Signed-off-by: Ravi Bangoria <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Fixes: bd3dda9ab0fb ("perf trace: Allow overriding global --max-stack per event")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Stephane reported that we don't support period for enabling large PEBS
data, which there's no reason for. Adding PERF_SAMPLE_PERIOD into
freerunning flags.
Tested it with:
# perf record -e cycles:P -c 100 --no-timestamp -C 0 --period
Reported-by: Stephane Eranian <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Kan Liang <[email protected]>
Tested-by: Stephane Eranian <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently the async EQ has 256 entries only. It might not be big enough
for the SW to handle all the needed pending events. For example, in case
of many QPs (let's say 1024) connected to a SRQ created using NVMeOF target
and the target goes down, the FW will raise 1024 "last WQE reached" events
and may cause EQ overrun. Increase the EQ to more reasonable size, that beyond
it the FW should be able to delay the event and raise it later on using internal
backpressure mechanism.
Signed-off-by: Max Gurtovoy <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
The consumers of this routine expects the affinity map of of vector
index relative to the first completion vector. The upper layers are
not aware of internal/private completion vectors that mlx5 allocates
for its own usage.
Hence, return the affinity map of vector index relative to the first
completion vector.
Fixes: 05e0cc84e00c ("net/mlx5: Fix get vector affinity helper function")
Reported-by: Logan Gunthorpe <[email protected]>
Tested-by: Max Gurtovoy <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Cc: <[email protected]> # v4.15
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
The hip06 and hip08 run on a little endian ARM, it needs to
revise the annotations to indicate that the HW uses little
endian data in the various DMA buffers, and flow the necessary
swaps throughout.
The imm_data use big endian mode. The cpu_to_le32/le32_to_cpu
swaps are no-op for this, which makes the only substantive
change the handling of imm_data which is now mandatory swapped.
This also keep match with the userspace hns driver and resolve
the warning by sparse.
Signed-off-by: Lijun Ou <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Since commit 7b6da818d86f ("drm/i915: Restore the kernel context after a
GPU reset on an idle engine") we submit a request following the engine
reset. The intent is that we don't submit a request if the engine is
busy (as it will restart active by itself) but we only checked to see if
there were remaining requests in flight on the hardware and skipped
checking to see if there were any ready requests that would be
immediately submitted on restart (the same time as our new request would
be). Having convinced the engine to appear idle in the previous patch,
we can use intel_engine_is_idle() as a better test to only submit a new
request if there are no pending requests.
As it happens, this is tripping up igt/drv_selftest/live_hangcheck in CI
as we overfill the kernel_context ringbuffer trigger an infinite
recursion from within the reset.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104786
References: 7b6da818d86f ("drm/i915: Restore the kernel context after a GPU reset on an idle engine")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Michel Thierry <[email protected]>
Reviewed-by: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In preparation for the next patch, we want the engine to appear idle
after a reset (if there are no requests in flight). For execlists, this
entails clearing the active status on reset, it will be regenerated on
restarting the engine after the reset. In the process, note that a
couple of other status flags and checks could be moved into the
describing function.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Avoid injecting hangs in to the i915->kernel_context in case the GPU
reset leaves corruption in the context image in its wake (leading to
continual failures and system hangs after the selftests are ostensibly
complete). Use a sacrificial kernel_context instead.
v2: Closing a context is tricky; export a function (for selftests) from
i915_gem_context.c to get it right.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Michel Thierry <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When injecting rapid resets, we must be careful to at least wait for the
previous reset to have taken effect and the engine restarted. If we
perform a second reset before that has happened, we will notice that the
engine hasn't recovered and declare it lost, wedging the device and
failing. In practice, since we wait for each hanging batch to start
before injecting the reset, this too-fast-reset condition can only be
triggered when moving onto the next engine in the test, so we need only
wait for the existing reset to complete before switching engines.
v2: Wrap up the wait inside a safety net to bail out in case of angry hw.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Michel Thierry <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
If we remember to cancel the signaler on a request when retiring it
(after we know that the request has been signaled), we do not need to
carry an additional request in the signaler itself. This prevents an
issue whereby the signaler threads may be delayed and hold on to
thousands of request references, causing severe memory fragmentation and
premature oom (most noticeable on 32b snb due to the limited GFP_KERNEL
and frequent use of inter-engine fences).
v2: Rename first_signal(), document reads outside of locks.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Tvrtko Ursulin <[email protected]>
|
|
Stephan reported we don't unset PERIOD sample type when --no-period is
specified. Adding the unset check and reset PERIOD if --no-period is
specified.
Committer notes:
Check the sample_type, it shouldn't have PERF_SAMPLE_PERIOD there when
--no-period is used.
Before:
# perf record --no-period sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ]
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
After:
[root@jouet ~]# perf record --no-period sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (17 samples) ]
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
[root@jouet ~]#
Reported-by: Stephane Eranian <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Stephane Eranian <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Stephane reported that we don't set properly PERIOD sample type for
events with period term defined.
Before:
$ perf record -e cpu/cpu-cycles,period=1000/u ls
$ perf evlist -v
cpu/cpu-cycles,period=1000/u: ... sample_type: IP|TID|TIME|PERIOD, ...
After:
$ perf record -e cpu/cpu-cycles,period=1000/u ls
$ perf evlist -v
cpu/cpu-cycles,period=1000/u: ... sample_type: IP|TID|TIME, ...
Setting PERIOD sample type based on period term setup.
Committer note:
When we use -c or a period=N term in the event definition, then we don't
need to ask the kernel, for this event, via perf_event_attr.sample_type
|= PERF_SAMPLE_PERIOD, to put the event period in each sample for this
event, as we know it already, it is in perf_event_attr.sample_period.
Reported-by: Stephane Eranian <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Stephane Eranian <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Jose Abreu is working on this driver and I will leave Synopsys soon.
Thus it does not seem appropriate for me to be a co-maintainer anymore.
Signed-off-by: Jie Deng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The SK_MEM_QUANTUM was changed from PAGE_SIZE to 4096. And the
tcp_wmem/tcp_rmem min default values are 4096.
Fixes: bd68a2a854ad ("net: set SK_MEM_QUANTUM to 4096")
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Tonghao Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The merge of commit f875a832d2028 ("MIPS: Abstract CPU core & VP(E) ID
access through accessor functions") ended up creating a duplicate
assignment of core during the rebase on commit bac06cf0fb9d ("MIPS:
smp-cps: Fix potentially uninitialised value of core"). Remove the
duplicate.
Fixes: f875a832d202 ("MIPS: Abstract CPU core & VP(E) ID access through accessor functions")
Signed-off-by: Matt Redfearn <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/17955/
Signed-off-by: James Hogan <[email protected]>
|
|
The GIC supports running in External Interrupt Controller (EIC) mode,
and will signal this via cpu_has_veic if enabled in hardware. Currently
the generic kernel will panic if cpu_has_veic is set - but the GIC can
legitimately set this flag if either configured to boot in EIC mode, or
if the GIC driver enables this mode. Make the kernel not panic in this
case, and instead just check if the GIC is present. If so, use it's CPU
local interrupt routing functions. If an EIC is present, but it is not
the GIC, then the kernel does not know how to get the VIRQ for the CPU
local interrupts and should panic. Support for alternative EICs being
present is needed here for the generic kernel to support them.
Suggested-by: Paul Burton <[email protected]>
Signed-off-by: Matt Redfearn <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/18191/
Signed-off-by: James Hogan <[email protected]>
|
|
Define TIF_ISOLATE_BP and TIF_ISOLATE_BP_GUEST and add the necessary
plumbing in entry.S to be able to run user space and KVM guests with
limited branch prediction.
To switch a user space process to limited branch prediction the
s390_isolate_bp() function has to be call, and to run a vCPU of a KVM
guest associated with the current task with limited branch prediction
call s390_isolate_bp_guest().
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
When commit b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
added board support for the RBTX4939, it added a call to
led_classdev_register even if the LED class is built as a module.
Built-in arch code cannot call module code directly like this. Commit
b33b44073734 ("MIPS: TXX9: use IS_ENABLED() macro") subsequently
changed the inclusion of this code to a single check that
CONFIG_LEDS_CLASS is either builtin or a module, but the same issue
remains.
This leads to MIPS allmodconfig builds failing when CONFIG_MACH_TX49XX=y
is set:
arch/mips/txx9/rbtx4939/setup.o: In function `rbtx4939_led_probe':
setup.c:(.init.text+0xc0): undefined reference to `of_led_classdev_register'
make: *** [Makefile:999: vmlinux] Error 1
Fix this by using the IS_BUILTIN() macro instead.
Fixes: b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
Signed-off-by: Matt Redfearn <[email protected]>
Reviewed-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/18544/
Signed-off-by: James Hogan <[email protected]>
|
|
During testing, we trigger a lot of resets on an unbannable context
leading to massive amounts of irrelevant debug spam. Remove the
ban_score accounting and message for the unbannable context so that we
improve the signal:noise in the log messages for when the unexpected
occurs.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Execlists is now enabled by default and included in the list of
capabilities printed out to dmesg and beyond. We do not need to mention
it again, every time we restart the engine, so kill the spam.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Dump each engine state when i915_gem_set_wedged() is called to give us
some more clues as to why we had to terminate the GPU.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add the PPA instruction to the system entry and exit path to switch
the kernel to a different branch prediction behaviour. The instructions
are added via CPU alternatives and can be disabled with the "nospec"
or the "nobp=0" kernel parameter. If the default behaviour selected
with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be
used to enable the changed kernel branch prediction.
Acked-by: Cornelia Huck <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
To be able to switch off specific CPU alternatives with kernel parameters
make a copy of the facility bit mask provided by STFLE and use the copy
for the decision to apply an alternative.
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
This will make it possible for userspace to know whether reading
will block, without blocking on the fd. This makes it possible to
drain all queued CRC's in blocking mode, without having to reopen
the fd.
Signed-off-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
[mlankhorst: Use POLLIN|POLLRDNORM, based on Ville's suggestion]
|
|
Commit 17278a91e04f ("MIPS: CPS: Fix r1 .set mt assembler warning")
added .set MIPS_ISA_LEVEL_RAW to silence warnings about .set mt on r1,
however this can result in a MOVE being encoded as a 64-bit DADDU
instruction on certain version of binutils (e.g. 2.22), and reserved
instruction exceptions at runtime on 32-bit hardware.
Reduce the sizes of the push/pop sections to include only instructions
that are part of the MT ASE or which won't convert to 64-bit
instructions after .set mips64r2/mips64r6.
Reported-by: Greg Ungerer <[email protected]>
Fixes: 17278a91e04f ("MIPS: CPS: Fix r1 .set mt assembler warning")
Signed-off-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.15
Tested-by: Greg Ungerer <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/18578/
|
|
Provide the reason why we call intel_fbc_deactivate() so that debugging
issues with FBC being delayed is clearer.
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
|
|
The headers should be on a separate line for consistency, so add the
missing trailing newline in a few intel_engine_dump() callers.
Reported-by: Mika Kuoppala <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since unbannable contexts are special and supposed not to be causing GPU
hangs in the first place, make it clear when they are implicated in said
hang. In practice, most unbannable contexts are those created by igt
for the express purpose of throwing untold thousands of hangs at the GPU
and wish to keep doing so to finish the test. Normally they are cleaned
up, but it's when they or the other unbannable kernel contexts stay
stuck in an erroneous state that we need to worry and so need
highlighting.
Suggested-by: Mika Kuoppala <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Mika Kuoppala <[email protected]>
|
|
Fix whitespace of generic platform Makefile so that obj-y values align.
Fixes: f2d0b0d5c171 ("MIPS: ranchu: Add Ranchu as a new generic-based board")
Signed-off-by: James Hogan <[email protected]>
Reviewed-by: Paul Burton <[email protected]>
Reviewed-by: Matt Redfearn <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Miodrag Dinic <[email protected]>
Cc: Goran Ferenc <[email protected]>
Cc: Aleksandar Markovic <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/18582/
|
|
ranchu_of_match[] has no terminating element to end the search for a
matching compatible string when the first and only element does not
match, so add one now.
Fixes: f2d0b0d5c171 ("MIPS: ranchu: Add Ranchu as a new generic-based board")
Signed-off-by: James Hogan <[email protected]>
Reviewed-by: Paul Burton <[email protected]>
Reviewed-by: Matt Redfearn <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Miodrag Dinic <[email protected]>
Cc: Goran Ferenc <[email protected]>
Cc: Aleksandar Markovic <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/18581/
|
|
We now have a platform (Ranchu) in the "generic" platform which matches
based on the FDT compatible string using mips_machine_is_compatible(),
however that function doesn't stop at a blank struct
of_device_id::compatible as that is an array in the struct, not a
pointer to a string.
Fix the loop completion to check the first byte of the compatible array
rather than the address of the compatible array in the struct.
Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: James Hogan <[email protected]>
Reviewed-by: Paul Burton <[email protected]>
Reviewed-by: Matt Redfearn <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/18580/
|
|
cpufreq_resume can be called even without preceding cpufreq_suspend.
This can happen in following scenario:
suspend_devices_and_enter
--> dpm_suspend_start
--> dpm_prepare
--> device_prepare : this function errors out
--> dpm_suspend: this is skipped due to dpm_prepare failure
this means cpufreq_suspend is skipped over
--> goto Recover_platform, due to previous error
--> goto Resume_devices
--> dpm_resume_end
--> dpm_resume
--> cpufreq_resume
In case schedutil is used as frequency governor, cpufreq_resume will
eventually call sugov_start, which does following:
memset(sg_cpu, 0, sizeof(*sg_cpu));
....
This effectively erases function pointer for frequency update, causing
crash later on. The function pointer would have been set correctly if
subsequent cpufreq_add_update_util_hook runs successfully, but that
function returns earlier because cpufreq_suspend was not called:
if (WARN_ON(per_cpu(cpufreq_update_util_data, cpu)))
return;
The fix is to check cpufreq_suspended first, if it's false, that means
cpufreq_suspend was not called in the first place, so do not resume
cpufreq.
Signed-off-by: Bo Yan <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
[ rjw: Dropped printing a message ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Another fix for an issue reported by 0-day robot.
Reported-by: Dan Carpenter <[email protected]>
Fixes: 8ed5eec9d6c4 ("ovl: encode pure upper file handles")
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
A re-factoring patch in NFS export series has passed the wrong argument
to ovl_get_inode() causing a regression in the very recent fix to
fsnotify of overlay merge dir.
The regression has caused merge directory inodes to be hashed by upper
instead of lower real inode, when NFS export and directory indexing is
disabled. That caused an inotify watch to become obsolete after directory
copy up and drop caches.
LTP test inotify07 was improved to catch this regression.
The regression also caused multiple redirect dirs to same origin not to
be detected on lookup with NFS export disabled. An xfstest was added to
cover this case.
Fixes: 0aceb53e73be ("ovl: do not pass overlay dentry to ovl_get_inode()")
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
Add an optimized version of the array_index_mask_nospec function for
s390 based on a compare and a subtract with borrow.
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Clear all user space registers on entry to the kernel and all KVM guest
registers on KVM guest exit if the register does not contain either a
parameter or a result value.
Reviewed-by: Christian Borntraeger <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Fix the kernel-doc usage in cio to get rid of (W=1) build warnings like:
drivers/s390/cio/cio.c:1068: warning: No description found for parameter 'sch'
Signed-off-by: Sebastian Ott <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Add the signum system call parameter for documentation purposes only,
and without checking if the passed value is a valid real-time signal.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
With CONFIG_BPF_JIT_ALWAYS_ON is defined in the config file,
tools/testing/selftests/bpf/test_kmod.sh failed like below:
[root@localhost bpf]# ./test_kmod.sh
sysctl: setting key "net.core.bpf_jit_enable": Invalid argument
[ JIT enabled:0 hardened:0 ]
[ 132.175681] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
[ 132.458834] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
[ JIT enabled:1 hardened:0 ]
[ 133.456025] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
[ 133.730935] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
[ JIT enabled:1 hardened:1 ]
[ 134.769730] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
[ 135.050864] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
[ JIT enabled:1 hardened:2 ]
[ 136.442882] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096
[ 136.821810] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed]
[root@localhost bpf]#
The test_kmod.sh load/remove test_bpf.ko multiple times with different
settings for sysctl net.core.bpf_jit_{enable,harden}. The failed test #297
of test_bpf.ko is designed such that JIT always fails.
Commit 290af86629b2 (bpf: introduce BPF_JIT_ALWAYS_ON config)
introduced the following tightening logic:
...
if (!bpf_prog_is_dev_bound(fp->aux)) {
fp = bpf_int_jit_compile(fp);
#ifdef CONFIG_BPF_JIT_ALWAYS_ON
if (!fp->jited) {
*err = -ENOTSUPP;
return fp;
}
#endif
...
With this logic, Test #297 always gets return value -ENOTSUPP
when CONFIG_BPF_JIT_ALWAYS_ON is defined, causing the test failure.
This patch fixed the failure by marking Test #297 as expected failure
when CONFIG_BPF_JIT_ALWAYS_ON is defined.
Fixes: 290af86629b2 (bpf: introduce BPF_JIT_ALWAYS_ON config)
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2018-02-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) support XDP attach in libbpf, from Eric.
2) minor fixes, from Daniel, Jakub, Yonghong, Alexei.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull spectre/meltdown updates from Thomas Gleixner:
"The next round of updates related to melted spectrum:
- The initial set of spectre V1 mitigations:
- Array index speculation blocker and its usage for syscall,
fdtable and the n180211 driver.
- Speculation barrier and its usage in user access functions
- Make indirect calls in KVM speculation safe
- Blacklisting of known to be broken microcodes so IPBP/IBSR are not
touched.
- The initial IBPB support and its usage in context switch
- The exposure of the new speculation MSRs to KVM guests.
- A fix for a regression in x86/32 related to the cpu entry area
- Proper whitelisting for known to be safe CPUs from the mitigations.
- objtool fixes to deal proper with retpolines and alternatives
- Exclude __init functions from retpolines which speeds up the boot
process.
- Removal of the syscall64 fast path and related cleanups and
simplifications
- Removal of the unpatched paravirt mode which is yet another source
of indirect unproteced calls.
- A new and undisputed version of the module mismatch warning
- A couple of cleanup and correctness fixes all over the place
Yet another step towards full mitigation. There are a few things still
missing like the RBS underflow mitigation for Skylake and other small
details, but that's being worked on.
That said, I'm taking a belated christmas vacation for a week and hope
that everything is magically solved when I'm back on Feb 12th"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
KVM/x86: Add IBPB support
KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDX
x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
x86/pti: Mark constant arrays as __initconst
x86/spectre: Simplify spectre_v2 command line parsing
x86/retpoline: Avoid retpolines for built-in __init functions
x86/kvm: Update spectre-v1 mitigation
KVM: VMX: make MSR bitmaps per-VCPU
x86/paravirt: Remove 'noreplace-paravirt' cmdline option
x86/speculation: Use Indirect Branch Prediction Barrier in context switch
x86/cpuid: Fix up "virtual" IBRS/IBPB/STIBP feature bits on Intel
x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable"
x86/spectre: Report get_user mitigation for spectre_v1
nl80211: Sanitize array index in parse_txq_params
vfs, fdtable: Prevent bounds-check bypass via speculative execution
x86/syscall: Sanitize syscall table de-references under speculation
x86/get_user: Use pointer masking to limit speculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of changes:
- a fixup for kexec related to 5-level paging mode. That covers most
of the cases except kexec from a 5-level kernel to a 4-level
kernel. The latter needs more work and is going to come in 4.17
- two trivial fixes for build warnings triggered by LTO and gcc-8"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/power: Fix swsusp_arch_resume prototype
x86/dumpstack: Avoid uninitlized variable
x86/kexec: Make kexec (mostly) work in 5-level paging mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two small changes:
- a fix for a interrupt regression caused by the vector management
changes in 4.15 affecting museum pieces which rely on interrupt
probing for legacy (e.g. parallel port) devices.
One of the startup calls in the autoprobe code was not changed to
the new activate_and_startup() function resulting in a warning and
as a consequence failing to discover the device interrupt.
- a trivial update to the copyright/license header of the STM32 irq
chip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Make legacy autoprobing work again
irqchip/stm32: Fix copyright
|
|
Pull more block updates from Jens Axboe:
"Most of this is fixes and not new code/features:
- skd fix from Arnd, fixing a build error dependent on sla allocator
type.
- blk-mq scheduler discard merging fixes, one from me and one from
Keith. This fixes a segment miscalculation for blk-mq-sched, where
we mistakenly think two segments are physically contigious even
though the request isn't carrying real data. Also fixes a bio-to-rq
merge case.
- Don't re-set a bit on the buffer_head flags, if it's already set.
This can cause scalability concerns on bigger machines and
workloads. From Kemi Wang.
- Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
distuingish between a local (device related) resource starvation
and a global one. The latter might happen without IO being in
flight, so it has to be handled a bit differently. From Ming"
* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
block: skd: fix incorrect linux/slab_def.h inclusion
buffer: Avoid setting buffer bits that are already set
blk-mq-sched: Enable merging discard bio into request
blk-mq: fix discard merge with scheduler attached
blk-mq: introduce BLK_STS_DEV_RESOURCE
|
|
Pull NTB updates from Jon Mason:
"Bug fixes galore, removal of the ntb atom driver, and updates to the
ntb tools and tests to support the multi-port interface"
* tag 'ntb-4.16' of git://github.com/jonmason/ntb: (37 commits)
NTB: ntb_perf: fix cast to restricted __le32
ntb_perf: Fix an error code in perf_copy_chunk()
ntb_hw_switchtec: Make function switchtec_ntb_remove() static
NTB: ntb_tool: fix memory leak on 'buf' on error exit path
NTB: ntb_perf: fix printing of resource_size_t
NTB: ntb_hw_idt: Set NTB_TOPO_SWITCH topology
NTB: ntb_test: Update ntb_perf tests
NTB: ntb_test: Update ntb_tool MW tests
NTB: ntb_test: Add ntb_tool Message tests
NTB: ntb_test: Update ntb_tool Scratchpad tests
NTB: ntb_test: Update ntb_tool DB tests
NTB: ntb_test: Update ntb_tool link tests
NTB: ntb_test: Add ntb_tool port tests
NTB: ntb_test: Safely use paths with whitespace
NTB: ntb_perf: Add full multi-port NTB API support
NTB: ntb_tool: Add full multi-port NTB API support
NTB: ntb_pp: Add full multi-port NTB API support
NTB: Fix UB/bug in ntb_mw_get_align()
NTB: Set dma mask and dma coherent mask to NTB devices
NTB: Rename NTB messaging API methods
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"Misc driver changes only:
- TI-MsgMgr: Fix print format for a printk
- TI-MSgMgr: SPDX license switch for the driver
- QCOM-IPC: Convert driver to use regmap
- QCOM-IPC: Spawn sibling clock device from mailbox driver"
* tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: Document the APCS clock binding
mailbox: qcom: Create APCS child device for clock controller
mailbox: qcom: Convert APCS IPC driver to use regmap
mailbox: ti-msgmgr: Use %zu for size_t print format
mailbox: ti-msgmgr: Switch to SPDX Licensing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has the following changes for you:
- new flag to mark DMA safe buffers in i2c_msg. Also, some
infrastructure around it. And docs.
- huge refactoring of the at24 driver led by the new maintainer
Bartosz
- update I2C bus recovery to send STOP after recovery
- conversion from gpio to gpiod for I2C bus recovery
- adding a fault-injector to the i2c-gpio driver
- lots of small driver improvements, and bigger ones to
i2c-sh_mobile"
* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
i2c: mv64xxx: Add myself as maintainer for this driver
i2c: mv64xxx: Fix clock resource by adding an optional bus clock
i2c: mv64xxx: Remove useless test before clk_disable_unprepare
i2c: mxs: use true and false for boolean values
i2c: meson: update doc description to fix build warnings
i2c: meson: add configurable divider factors
dt-bindings: i2c: update documentation for the Meson-AXG
i2c: imx-lpi2c: add runtime pm support
i2c: rcar: fix some trivial typos in comments
i2c: davinci: fix the cpufreq transition
i2c: rk3x: add proper kerneldoc header
i2c: rk3x: account for const type of of_device_id.data
i2c: acorn: remove outdated path from file header
i2c: acorn: add MODULE_LICENSE tag
i2c: rcar: implement bus recovery
i2c: send STOP after successful bus recovery
i2c: ensure SDA is released in recovery if SDA is controllable
i2c: add 'set_sda' to bus_recovery_info
i2c: add identifier in declarations for i2c_bus_recovery
i2c: make kerneldoc about bus recovery more precise
...
|