| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is
especially important, see summary below and in the commit for details:
- Select GPIOLIB_IRQCHIP on the max77620 GPIO expander
- Fix context restore in the Zynq driver
- Create a new ACPI quirk handler for disabling wakeups on
problematic hardware.
- Fix a coding style issue on the mockup device"
* tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism
gpiolib: acpi: Turn dmi_system_id table into a generic quirk table
gpio: zynq: Fix for bug in zynq_gpio_restore_context API
gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP
gpio: mockup: fix coding style
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two fixes for pin control, not much to say about it, it's just regular
driver fixes:
- Fix erroneous shift in the Meson driver
- Make Lochnagar select the GPIOLIB Kconfig symbol"
* tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson: Fix wrong shift value when get drive-strength
pinctrl: lochnagar: select GPIOLIB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a few small fixups here"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: imx_sc_key - only take the valid data from SCU firmware as key state
Input: add safety guards to input_set_keycode()
Input: input_event - fix struct padding on sparc64
Input: uinput - always report EPOLLOUT
|
|
The I2C specification states that tsu:sto for standard mode timing must
be at minimum 4us. Pictographically, this is:
SCL: ____/~~~~~~~~~
SDA: _________/~~~~
->| |<- 4us minimum
We are currently waiting 2.5us between asserting SCL and SDA, which is
in violation of the standard. Adjust the timings to ensure that we meet
what is stipulated as the minimum timings to ensure that all devices
correctly interpret the STOP bus transition.
This is more important than trying to generate a square wave with even
duty cycle.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
In current driver, locks can be taken as follows:
- Register access: take a lock on regmap config and then on clock.
- Master clock provider: take a lock on clock and then on regmap config.
This can lead to the circular locking summarized below.
Remove peripheral clock management through regmap framework, and manage
peripheral clock in driver instead. On register access, lock on clock
is taken first, which allows to avoid possible locking issue.
[ 6696.561513] ======================================================
[ 6696.567670] WARNING: possible circular locking dependency detected
[ 6696.573842] 4.19.49 #866 Not tainted
[ 6696.577397] ------------------------------------------------------
[ 6696.583566] pulseaudio/6439 is trying to acquire lock:
[ 6696.588697] 87b0a25b (enable_lock){..-.}, at: clk_enable_lock+0x64/0x128
[ 6696.595377]
[ 6696.595377] but task is already holding lock:
[ 6696.601197] d858f825 (stm32_sai_sub:1342:(sai->regmap_config)->lock){....}
...
[ 6696.812513] Possible unsafe locking scenario:
[ 6696.812513]
[ 6696.818418] CPU0 CPU1
[ 6696.822935] ---- ----
[ 6696.827451] lock(stm32_sai_sub:1342:(sai->regmap_config)->lock);
[ 6696.833618] lock(enable_lock);
[ 6696.839350] lock(stm32_sai_sub:1342:
(sai->regmap_config)->lock);
[ 6696.848035] lock(enable_lock);
Fixes: 03e78a242a15 ("ASoC: stm32: sai: add h7 support")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Micron flashes do not support 16 bit writes on the Status Register.
According to micron datasheets, when using the Write Status Register
(01h) command, the chip select should be driven LOW and held LOW until
the eighth bit of the last data byte has been latched in, after which
it must be driven HIGH. If CS is not driven HIGH, the command is not
executed, flag status register error bits are not set, and the write enable
latch remains set to 1. This fixes the lock operations on micron flashes.
Reported-by: John Garry <[email protected]>
Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Tudor Ambarus <[email protected]>
Tested-by: John Garry <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
With gcc -O3, we get a new warning:
In file included from arch/arm64/include/asm/processor.h:28,
from drivers/mtd/sm_ftl.c:8:
In function 'memset',
inlined from 'sm_read_sector.constprop' at drivers/mtd/sm_ftl.c:250:3:
include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull]
return __builtin_memset(p, c, size);
>From all I can tell, this cannot happen (the function is called
either with a NULL buffer or with a -1 block number but not both),
but adding a check makes it more robust and avoids the warning.
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
The commit converting the driver to DMAengine was missing the flags for
the memcpy prepare call.
It went unnoticed since the omap-dma driver was ignoring them.
Fixes: 3ed6a4d1de2c5 (" mtd: onenand: omap2: Convert to use dmaengine for memcp")
Reported-by: Aaro Koskinen <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Tested-by: H. Nikolaus Schaller <[email protected]>
Tested-by: Aaro Koskinen <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
The __iomem memory should be copied with memcpy_fromio. This fixes
Sparse warnings like:
drivers/mtd/nand/onenand/samsung_mtd.c:678:40: warning: incorrect type in argument 2 (different address spaces)
drivers/mtd/nand/onenand/samsung_mtd.c:678:40: expected void const *from
drivers/mtd/nand/onenand/samsung_mtd.c:678:40: got void [noderef] <asn:2> *[assigned] p
drivers/mtd/nand/onenand/samsung_mtd.c:679:19: warning: incorrect type in assignment (different address spaces)
drivers/mtd/nand/onenand/samsung_mtd.c:679:19: expected void [noderef] <asn:2> *[assigned] p
drivers/mtd/nand/onenand/samsung_mtd.c:679:19: got unsigned char *
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
Correct mispelling, spacing, and coding style flaws caught by
checkpatch.pl script in the Omap2 Onenand driver .
Signed-off-by: Amir Mahdi Ghorbanian <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
Use dma_addr_t type to pass memory address and control data in
DMA descriptor fields memory_pointer and ctrl_data_ptr
To fix warning: cast to pointer from integer of different size
Signed-off-by: Vasyl Gomonovych <[email protected]>
Acked-by: Olof Johansson <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
We are currently using nand_soft_waitrdy to poll the status of the NAND
flash. FMC2 enables the wait feature bit (this feature is mandatory for
the sequencer mode). By enabling this feature, we can't poll the status
of the NAND flash, the read status command is stucked in FMC2 pipeline
until R/B# signal is high, and locks the CPU bus.
To avoid to lock the CPU bus, we poll FMC2 ISR register. This register
reports the status of the R/B# signal.
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Christophe Kerello <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for OOB in hiddev, from Dmitry Torokhov
- _poll API fixes for hidraw, from Marcel Holtmann
- functional fix for Steam driver, from Rodrigo Rivas Costa
- a few new device IDs / device-specific quirks and other assorted
smaller fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: steam: Fix input device disappearing
HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
drivers/hid/hid-multitouch.c: fix a possible null pointer access.
HID: wacom: Recognize new MobileStudio Pro PID
HID: intel-ish-hid: ipc: add CMP device id
HID: hiddev: fix mess in hiddev_open()
HID: hid-input: clear unmapped usages
HID: Add quirk for incorrect input length on Lenovo Y720
HID: asus: Ignore Asus vendor-page usage-code 0xff events
HID: ite: Add USB id match for Acer SW5-012 keyboard dock
HID: Add quirk for Xin-Mo Dual Controller
HID: Fix slab-out-of-bounds read in hid_field_extract
HID: multitouch: Add LG MELF0410 I2C touchscreen support
HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
|
|
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
|
|
The new machine loader on z15 always creates an IPL Report block and
thus sets the IPL_PL_FLAG_IPLSR even when secure boot is disabled. This
causes the wrong message being printed at boot. Fix this by checking for
IPL_PL_FLAG_SIPL instead.
Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Signed-off-by: Philipp Rudo <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
This patch moves the reset invocation of an ap device when
fresh detected from the ap bus to the probe() function of
the driver responsible for this device.
The virtualisation of ap devices makes it necessary to
remove unconditioned resets on fresh appearing apqn devices.
It may be that such a device is already enabled for guest
usage. So there may be a race condition between host ap bus
and guest ap bus doing the reset. This patch moves the
reset from the ap bus to the zcrypt drivers. So if there
is no zcrypt driver bound to an ap device - for example
the ap device is bound to the vfio device driver - the
ap device is untouched passed to the vfio device driver.
Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Regression tests showed that the CCA cipher key function which
generates an CCA cipher key with given clear key value does not work
correctly. At parsing the reply CPRB two limits are wrong calculated
resulting in rejecting the reply as invalid with s390dbf message
"_ip_cprb_helper reply with invalid or unknown key block".
Fixes: f2bbc96e7cfa ("s390/pkey: add CCA AES cipher key support")
Cc: Stable <[email protected]>
Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Intel ID: PSIRT-TA-201910-001
CVEID: CVE-2019-14615
Intel GPU Hardware prior to Gen11 does not clear EU state
during a context switch. This can result in information
leakage between contexts.
For Gen8 and Gen9, hardware provides a mechanism for
fast cleardown of the EU state, by issuing a PIPE_CONTROL
with bit 27 set. We can use this in a context batch buffer
to explicitly cleardown the state on every context switch.
As this workaround is already in place for gen8, we can borrow
the code verbatim for Gen9.
Signed-off-by: Mika Kuoppala <[email protected]>
Signed-off-by: Akeem G Abodunrin <[email protected]>
Cc: Kumar Valsan Prathap <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Balestrieri Francesco <[email protected]>
Cc: Bloomfield Jon <[email protected]>
Cc: Dutt Sudeep <[email protected]>
|
|
Commit 85a8ce62c2ea ("block: add bio_truncate to fix guard_bio_eod")
adds bio_truncate() for handling bio EOD. However, bio_truncate()
doesn't use the passed 'op' parameter from guard_bio_eod's callers.
So bio_trunacate() may retrieve wrong 'op', and zering pages may
not be done for READ bio.
Fixes this issue by moving guard_bio_eod() after bio_set_op_attrs()
in submit_bh_wbc() so that bio_truncate() can always retrieve correct
op info.
Meantime remove the 'op' parameter from guard_bio_eod() because it isn't
used any more.
Cc: Carlos Maiolino <[email protected]>
Cc: [email protected]
Fixes: 85a8ce62c2ea ("block: add bio_truncate to fix guard_bio_eod")
Signed-off-by: Ming Lei <[email protected]>
Fold in kerneldoc and bio_op() change.
Signed-off-by: Jens Axboe <[email protected]>
|
|
Turns out when introducing the eMMC version the gpmi node required for
NAND flash support got enabled exclusively on Colibri iMX7D 512MB.
Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support")
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.
Fixes: 96a9169cf621 ("ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.
Fixes: 3feea8805d6f ("ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.
Fixes: 37a4bdead109 ("ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.
Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.
When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.
Signed-off-by: Rodrigo Rivas Costa <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on
the 1.5 version of the i.Core MX6 cpu module. The 1.5 version
differs from the original one for a few details, including the
ethernet PHY interface clock provider.
With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver
While before using the 1.5 version, ethernet failed to startup
do to un-clocked PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY
Similar fix has merged for i.Core MX6Q but missed to update for DL.
Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
Cc: Jacopo Mondi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The use of __sync functions for atomic memory access is not
supported in the kernel, and can result in a link error depending
on configuration:
ERROR: "__tsan_atomic32_compare_exchange_strong" [drivers/crypto/hisilicon/sec2/hisi_sec2.ko] undefined!
ERROR: "__tsan_atomic64_fetch_add" [drivers/crypto/hisilicon/sec2/hisi_sec2.ko] undefined!
Use the kernel's own atomic interfaces instead. This way the
debugfs interface actually reads the counter atomically.
Fixes: 416d82204df4 ("crypto: hisilicon - add HiSilicon SEC V2 driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.5-2020-01-08:
amdgpu:
- Stability fix for raven
- Reduce pixel encoding to if max clock is exceeded on HDMI
to allow additional high res modes
UAPI:
- enable DRIVER_SYNCOBJ_TIMELINE for amdgpu
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
mst: Fix NO_STOP_BIT bit offset (Wayne)
sun4i: Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
fb_helper: Fix bits_per_pixel param set behavior to round up (Geert)
Cc: Wayne Lin <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
From: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108205949.GA233273@art_vandelay
|
|
In my attempt to fix a memory leak, I introduced a double-free in the
pstore error path. Instead of trying to manage the allocation lifetime
between persistent_ram_new() and its callers, adjust the logic so
persistent_ram_new() always takes a kstrdup() copy, and leaves the
caller's allocation lifetime up to the caller. Therefore callers are
_always_ responsible for freeing their label. Before, it only needed
freeing when the prz itself failed to allocate, and not in any of the
other prz failure cases, which callers would have no visibility into,
which is the root design problem that lead to both the leak and now
double-free bugs.
Reported-by: Cengiz Can <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Fixes: 8df955a32a73 ("pstore/ram: Fix error-path memory leak in persistent_ram_new() callers")
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
The current 'tipc_wait_for_connect()' function does a wait-loop for the
condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket
connecting has done. However, when the condition is met, it returns '0'
even in the case the connecting is actually failed, the socket state is
set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..).
This results in a wrong return code for the 'connect()' call from user,
making it believe that the connection is established and go ahead with
building, sending a message, etc. but finally failed e.g. '-EPIPE'.
This commit fixes the issue by changing the wait condition to the
'tipc_sk_connected(sk)', so the function will return '0' only when the
connection is really established. Otherwise, either the socket 'sk_err'
if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly.
Acked-by: Ying Xue <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Tuong Lien <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.
In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...
The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.
In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.
Acked-by: Ying Xue <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Tuong Lien <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing netns context in arp_tables, from Florian Westphal.
2) Underflow in flowtable reference counter, from wenxu.
3) Fix incorrect ethernet destination address in flowtable offload,
from wenxu.
4) Check for status of neighbour entry, from wenxu.
5) Fix NAT port mangling, from wenxu.
6) Unbind callbacks from destroy path to cleanup hardware properly
on flowtable removal.
7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp
and use it.
8) NULL pointer exception when timeout argument is null in conntrack
dccp and sctp protocol helpers, from Florian Westphal.
9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from
Florian.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The set uadt functions assume lineno is never NULL, but it is in
case of ip_set_utest().
syzkaller managed to generate a netlink message that calls this with
LINENO attr present:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563
pass a dummy lineno storage, its easier than patching all set
implementations.
This seems to be a day-0 bug.
Cc: Jozsef Kadlecsik <[email protected]>
Reported-by: [email protected]
Fixes: a7b4f989a6294 ("netfilter: ipset: IP set core support")
Signed-off-by: Florian Westphal <[email protected]>
Acked-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The timeout pointer can be NULL which means we should modify the
per-nets timeout instead.
All do this, except sctp and dccp which instead give:
general protection fault: 0000 [#1] PREEMPT SMP KASAN
net/netfilter/nf_conntrack_proto_dccp.c:682
ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67
cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368
nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
Reported-by: [email protected]
Fixes: c779e849608a8 ("netfilter: conntrack: remove get_timeout() indirection")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:
drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]
Change the code to always write zeroes instead.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use of eth_hdr() in tx path is error prone.
Many drivers call skb_reset_mac_header() before using it,
but others do not.
Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.
Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.
Hopefully we will be able to revert 6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.
BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579
CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
__get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
mc_hash drivers/net/macvlan.c:251 [inline]
macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
__netdev_start_xmit include/linux/netdevice.h:4447 [inline]
netdev_start_xmit include/linux/netdevice.h:4461 [inline]
dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
packet_snd net/packet/af_packet.c:2966 [inline]
packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
__sys_sendto+0x262/0x380 net/socket.c:1985
__do_sys_sendto net/socket.c:1997 [inline]
__se_sys_sendto net/socket.c:1993 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639
RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x163/0x770 mm/slab.c:3665
kmalloc include/linux/slab.h:561 [inline]
tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8880a4932000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
4096-byte region [ffff8880a4932000, ffff8880a4933000)
The buggy address belongs to the page:
page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0
raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Petr Machata says:
====================
When ungrafting from PRIO, replace child with FIFO
When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.
In patch #2, this problem is fixed for PRIO by first attempting to create a
default Qdisc and only falling back to noop when that fails. This pattern
of attempting to create an invisible FIFO, using NOOP only as a fallback,
is also seen in some other Qdiscs.
The only driver currently offloading PRIO (and thus presumably the only one
impacted by this) is mlxsw. Therefore patch #1 extends mlxsw to handle the
replacement by an invisible FIFO gracefully.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.
Fix PRIO by first attempting to create a default Qdisc and only falling
back to noop when that fails. This pattern of attempting to create an
invisible FIFO, using NOOP only as a fallback, is also seen in other
Qdiscs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Petr Machata <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The following patch will change PRIO to replace a removed Qdisc with an
invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the
graft message that is generated. But because FIFO does not issue its own
REPLACE message, when the graft operation takes place, the Qdisc that mlxsw
tracks under the indicated band is still the old one. The child
handle (0:0) therefore does not match, and mlxsw rejects the graft
operation, which leads to an extack message:
Warning: Offloading graft operation failed.
Fix by ignoring the invisible children in the PRIO graft handler. The
DESTROY message of the removed Qdisc is going to follow shortly and handle
the removal.
Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command")
Signed-off-by: Petr Machata <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As I am no longer with Linaro, I no longer have access to documentation
for this IP. The Linaro email will start bouncing soon.
Vinod is fully capable to maintain this driver by himself, therefore
remove myself as co-maintainer for qcom-ethqos.
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
WARNING: bad unlock balance detected!
5.5.0-rc5-syzkaller #0 Not tainted
-------------------------------------
syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at:
[<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
but there are no more locks to release!
other info that might help us debug this:
2 locks held by syz-executor921/9688:
#0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
#0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421
#1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
#1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951
stack backtrace:
CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline]
print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984
__lock_release kernel/locking/lockdep.c:4242 [inline]
lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503
sock_release_ownership include/net/sock.h:1496 [inline]
release_sock+0x17c/0x1c0 net/core/sock.c:2961
gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
gtp_encap_enable drivers/net/gtp.c:852 [inline]
gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666
__rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305
rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363
rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
____sys_sendmsg+0x753/0x880 net/socket.c:2330
___sys_sendmsg+0x100/0x170 net/socket.c:2384
__sys_sendmsg+0x105/0x1d0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg net/socket.c:2424 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x445d49
Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000
R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c
R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf
Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As diagnosed by Florian :
If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :
if (f->credit <= 0) {
f->credit += q->quantum;
goto begin;
}
... because f->credit is either 0 or -2147483648.
Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <[email protected]>
Diagnosed-by: Florian Westphal <[email protected]>
Reported-by: [email protected]
Signed-off-by: David S. Miller <[email protected]>
|
|
There is no module named tipc_diag.
The assignment to tipc_diag-y has no effect.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
net/tipc/Makefile adds socket.o twice.
tipc-y += addr.o bcast.o bearer.o \
core.o link.o discover.o msg.o \
name_distr.o subscr.o monitor.o name_table.o net.o \
netlink.o netlink_compat.o node.o socket.o eth_media.o \
^^^^^^^^
topsrv.o socket.o group.o trace.o
^^^^^^^^
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.
Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.
Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 42ec336f1f9d ("ALSA: hda: Disable regmap
internal locking").
Without regmap locking, there is a race between snd_hda_codec_amp_init()
and PM callbacks issuing regcache_sync(). This was caught by
following kernel warning trace:
<4> [358.080081] WARNING: CPU: 2 PID: 4157 at drivers/base/regmap/regcache.c:498 regcache_cache_only+0xf5/0x130
[...]
<4> [358.080148] Call Trace:
<4> [358.080158] snd_hda_codec_amp_init+0x4e/0x100 [snd_hda_codec]
<4> [358.080169] snd_hda_codec_amp_init_stereo+0x40/0x80 [snd_hda_codec]
Suggested-by: Takashi Iwai <[email protected]>
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/592
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/fixes
ASPEED device tree fixes for 5.5
Fixes for some badly applied patches that went in to 5.5. There is also
a fix for an incorrect i2c address.
* tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: rainier: Fix fan fault and presence
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed-g6: Fix FSI master location
Link: https://lore.kernel.org/r/CACPK8XcjazgORXNZBU1ECMukXG4HA8D9VeDxiSPifDk_iB7_dw@mail.gmail.com
Signed-off-by: Olof Johansson <[email protected]>
|
|
With the new omap_prm driver added unconditionally, omap2 builds
fail when the reset controller subsystem is disabled:
drivers/soc/ti/omap_prm.o: In function `omap_prm_probe':
omap_prm.c:(.text+0x2d4): undefined reference to `devm_reset_controller_register'
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3e99cb214f03 ("soc: ti: add initial PRM driver with reset control support")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
|