aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-13USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xxJerónimo Borque1-0/+2
Add device-ids for the Motorola Solutions TETRA radios MTP3xxx series and MTP85xx series $ lsusb -vd 0cad: Bus 001 Device 009: ID 0cad:9015 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9015 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Bus 001 Device 010: ID 0cad:9013 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9013 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Jerónimo Borque <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-13iio: light: vcnl4000: Fix scale for vcnl4040Guido Günther1-1/+2
According to the data sheet the ambient sensor's scale is 0.12 lux/step (not 0.024 lux/step as used by vcnl4200) when the integration time is 80ms. The integration time is currently hardcoded in the driver to that value. See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Signed-off-by: Guido Günther <[email protected]> Reviewed-by: Marco Felsch <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-13iio: buffer: align the size of scan bytes to size of the largest elementLars Möllendorf1-1/+5
Previous versions of `iio_compute_scan_bytes` only aligned each element to its own length (i.e. its own natural alignment). Because multiple consecutive sets of scan elements are buffered this does not work in case the computed scan bytes do not align with the natural alignment of the first scan element in the set. This commit fixes this by aligning the scan bytes to the natural alignment of the largest scan element in the set. Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by: Lars Möllendorf <[email protected]> Reviewed-by: Lars-Peter Clausen <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-13iio: chemical: pms7003: fix unmet triggered buffer dependencyTomasz Duszynski1-0/+1
IIO triggered buffer depends on IIO buffer which is missing from Kconfig file. This should go unnoticed most of the time because there's a chance something else has already enabled buffers. In some rare cases though one might experience kbuild warnings about unmet direct dependencies and build failures due to missing symbols. Fix this by selecting IIO_BUFFER explicitly. Signed-off-by: Tomasz Duszynski <[email protected]> Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor") Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-13iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_IDStephan Gerhold1-1/+2
At the moment, attempting to probe a device with ST_LSM6DS3_ID (e.g. using the st,lsm6ds3 compatible) fails with: st_lsm6dsx_i2c 1-006b: unsupported whoami [69] ... even though 0x69 is the whoami listed for ST_LSM6DS3_ID. This happens because st_lsm6dsx_check_whoami() also attempts to match unspecified (zero-initialized) entries in the "id" array. ST_LSM6DS3_ID = 0 will therefore match any entry in st_lsm6dsx_sensor_settings (here: the first), because none of them actually have all 12 entries listed in the "id" array. Avoid this by additionally checking if "name" is set, which is only set for valid entries in the "id" array. Note: Although the problem was introduced earlier it did not surface until commit 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") because ST_LSM6DS3_ID was the first entry in st_lsm6dsx_sensor_settings. Fixes: d068e4a0f921 ("iio: imu: st_lsm6dsx: add support to multiple devices with the same settings") Cc: <[email protected]> # 5.4 Acked-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Stephan Gerhold <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-13iio: adc: ad7124: Fix DT channel configurationAlexandru Tachici1-7/+5
This patch fixes device tree channel configuration. ad7124 driver reads channels configuration from the device tree. It expects to find channel specifications as child nodes. Before this patch ad7124 driver assumed that the child nodes are parsed by for_each_available_child_of_node in the order 0,1,2,3... This is wrong and the real order of the children can be seen by running: dtc -I fs /sys/firmware/devicetree/base on the machine. For example, running this on an rpi 3B+ yields the real children order: 4,2,0,7,5,3,1,6 Before this patch the driver assigned the channel configuration like this: - 0 <- 4 - 1 <- 2 - 2 <- 0 ........ For example, the symptoms can be observed by connecting the 4th channel to a 1V tension and then reading the in_voltage0-voltage19_raw sysfs (multiplied of course by the scale) one would see that channel 0 measures 1V and channel 4 measures only noise. Now the driver uses the reg property of each child in order to correctly identify to which channel the parsed configuration belongs to. Fixes b3af341bbd966: ("iio: adc: Add ad7124 support") Signed-off-by: Alexandru Tachici <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-01-13cpuidle: teo: Fix intervals[] array indexing bugIkjoon Jang1-1/+1
Fix a simple bug in rotating array index. Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems") Signed-off-by: Ikjoon Jang <[email protected]> Cc: 5.1+ <[email protected]> # 5.1+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-01-13platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0Jian-Hong Pan1-7/+1
Some of ASUS laptops like UX431FL keyboard backlight cannot be set to brightness 0. According to ASUS' information, the brightness should be 0x80 ~ 0x83. This patch fixes it by following the logic. Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support") Signed-off-by: Jian-Hong Pan <[email protected]> Reviewed-by: Daniel Drake <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-13ALSA: dice: fix fallback from protocol extension into limited functionalityTakashi Sakamoto1-1/+4
At failure of attempt to detect protocol extension, ALSA dice driver should be fallback to limited functionality. However it's not. This commit fixes it. Cc: <[email protected]> # v4.18+ Fixes: 58579c056c1c9 ("ALSA: dice: use extended protocol to detect available stream formats") Signed-off-by: Takashi Sakamoto <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-01-13ALSA: firewire-tascam: fix corruption due to spin lock without restoration ↵Takashi Sakamoto1-2/+3
in SoftIRQ context ALSA firewire-tascam driver can bring corruption due to spin lock without restoration of IRQ flag in SoftIRQ context. This commit fixes the bug. Cc: Scott Bahling <[email protected]> Cc: <[email protected]> # v4.21 Fixes: d7167422433c ("ALSA: firewire-tascam: queue events for change of control surface") Signed-off-by: Takashi Sakamoto <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-01-13platform/x86: intel_pmc_core: update Comet Lake platform driverHarry Pan1-0/+2
Adding new CML CPU model ID into platform driver support list. Signed-off-by: Harry Pan <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-13platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limitsHans de Goede1-1/+1
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70). Cc: Jason Anderson <[email protected]> Reported-by: Jason Anderson <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-13platform/x86: GPD pocket fan: Use default values when wrong modparams are givenHans de Goede1-6/+19
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case. This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL. Cc: [email protected] Cc: Jason Anderson <[email protected]> Reported-by: Jason Anderson <[email protected]> Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-13platform/mellanox: fix potential deadlock in the tmfifo driverLiming Sun1-9/+10
This commit fixes the potential deadlock caused by the console Rx and Tx processing at the same time. Rx and Tx both take the console and tmfifo spinlock but in different order which causes potential deadlock. The fix is to use different tmfifo spinlock for Rx and Tx since they protect different resources and it's safe to split the lock. Below is the reported call trace when copying/pasting large string in the console. Rx: _raw_spin_lock_irqsave (hvc lock) __hvc_poll hvc_poll in_intr vring_interrupt mlxbf_tmfifo_rxtx_one_desc (tmfifo lock) mlxbf_tmfifo_rxtx mlxbf_tmfifo_work_rxtx Tx: _raw_spin_lock_irqsave (tmfifo lock) mlxbf_tmfifo_virtio_notify virtqueue_notify virtqueue_kick put_chars hvc_push hvc_write (hvc lock) ... do_tty_write tty_write Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Cc: <[email protected]> # 5.4+ Reviewed-by: David Woods <[email protected]> Signed-off-by: Liming Sun <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-13platform/x86: intel-ips: Use the correct style for SPDX License IdentifierNishad Kamdar2-2/+2
This patch corrects the SPDX License Identifier style in header files related to x86 Platform Specific Drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-12Linux 5.5-rc6Linus Torvalds1-1/+1
2020-01-12Merge tag 'riscv/for-v5.5-rc6' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Two fixes for RISC-V: - Clear FP registers during boot when FP support is present, rather than when they aren't present - Move the header files associated with the SiFive L2 cache controller to drivers/soc (where the code was recently moved)" * tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup obvious bug for fp-regs reset riscv: move sifive_l2_cache.h to include/soc
2020-01-12riscv: Fixup obvious bug for fp-regs resetGuo Ren1-1/+1
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine ISA Register misa. Every bit:1 indicate a feature, so we should beqz reset_done when there is no F/D bit in csr_misa register. Signed-off-by: Guo Ren <[email protected]> [[email protected]: fix typo in commit message] Fixes: 9e80635619b51 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Paul Walmsley <[email protected]>
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah3-5/+5
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <[email protected]> Reviewed-by: Anup Patel <[email protected]> [[email protected]: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <[email protected]>
2020-01-12Merge tag 'iommu-fixes-v5.5-rc5' of ↵Linus Torvalds3-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Two fixes for VT-d and generic IOMMU code to fix teardown on error handling code paths. - Patch for the Intel VT-d driver to fix handling of non-PCI devices - Fix W=1 compile warning in dma-iommu code * tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: fix variable 'cookie' set but not used iommu/vt-d: Unlink device if failed to add to group iommu: Remove device link to group on failure iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU
2020-01-11Merge branch 'i2c/for-current' of ↵Linus Torvalds4-15/+23
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two driver bugfixes, a documentation fix, and a removal of a spec violation for the bus recovery algorithm in the core" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: fix bus recovery stop mode timing i2c: bcm2835: Store pointer to bus clock dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60 i2c: at91: fix clk_offset for sam9x60
2020-01-11Merge tag 'clone3-tls-v5.5-rc6' of ↵Linus Torvalds18-32/+45
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fixes from Christian Brauner: "This contains a series of patches to fix CLONE_SETTLS when used with clone3(). The clone3() syscall passes the tls argument through struct clone_args instead of a register. This means, all architectures that do not implement copy_thread_tls() but still support CLONE_SETTLS via copy_thread() expecting the tls to be located in a register argument based on clone() are currently unfortunately broken. Their tls value will be garbage. The patch series fixes this on all architectures that currently define __ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure that any architecture that enables clone3() in the future is forced to also implement copy_thread_tls(). My ultimate goal is to get rid of the copy_thread()/copy_thread_tls() split and just have copy_thread_tls() at some point in the not too distant future (Maybe even renaming copy_thread_tls() back to simply copy_thread() once the old function is ripped from all arches). This is dependent now on all arches supporting clone3(). While all relevant arches do that now there are still four missing: ia64, m68k, sh and sparc. They have the system call reserved, but not implemented. Once they all implement clone3() we can get rid of ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS. This series also includes a minor fix for the arm64 uapi headers which caused __NR_clone3 to be missing from the exported user headers. Unfortunately the series came in a little late especially given that it touches a range of architectures. Due to the holidays not all arch maintainers responded in time probably due to their backlog. Will and Arnd have thankfully acked the arm specific changes. Given that the changes are straightforward and rather minimal combined with the fact the that clone3() with CLONE_SETTLS is broken I decided to send them post rc3 nonetheless" * tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: um: Implement copy_thread_tls clone3: ensure copy_thread_tls is implemented xtensa: Implement copy_thread_tls riscv: Implement copy_thread_tls parisc: Implement copy_thread_tls arm: Implement copy_thread_tls arm64: Implement copy_thread_tls arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
2020-01-11ALSA: hda: Rename back to dmic_detect optionTakashi Iwai1-5/+8
We've got quite a few bug reports showing the SOF driver being loaded unintentionally recently, and the reason seems to be that users didn't know the module option change: with the recent kernel, a new option dsp_driver=1 has to be passed to a new module snd-intel-dspcfg instead of snd_hda_intel.dmic_detect=0 option. That is, actually there are two tricky things here: - We changed the whole detection in another module and another option semantics. - The existing option for skipping the DSP probe was also renamed. For avoiding the confusion and giving user more hint, this patch reverts the renamed option dsp_driver back to dmic_detect for snd-hda-intel module, and show the warning about the module option change when the non-default value is passed. Fixes: 82d9d54a6c0e ("ALSA: hda: add Intel DSP configuration / probe code") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-01-10Merge tag 'v5.5-rockchip-dtsfixes' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A fix for the Beelink A1 IR receiver setting the correct polarity. * tag 'v5.5-rockchip-dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix IR on Beelink A1 Link: https://lore.kernel.org/r/2054603.JKFSmqfO19@phil Signed-off-by: Olof Johansson <[email protected]>
2020-01-10Merge tag 'sunxi-fixes-for-5.5' of ↵Olof Johansson3-3/+3
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A couple of fixes for GPIO polarity and regulators on the A64 olinuxino. * tag 'sunxi-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator Link: https://lore.kernel.org/r/582f4fda-38af-43e8-af58-957aee5b9dd8.lettre@localhost Signed-off-by: Olof Johansson <[email protected]>
2020-01-10Merge tag 'imx-fixes-5.5-2' of ↵Olof Johansson13-28/+12
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.5, round 2: - Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0" error seen with UART1. - Correct compatible of RV3029 RTC device on imx6q-dhcom board. - Correct interrupt trigger type for magnetometer on board imx8mq-librem5-devkit. - A series from Anson Huang to fix vdd3p0 power supplier for a few NXP development board. - Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so that Ethernet interface on the board works properly. - Fix Toradex Colibri board to get NAND flash support back. - Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which is connected to PMIC SW2 output rather than a fixed 3V3 rail. - Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by kernel. - Fix endian setting for DCFG on LS1028A SoC, so that register access of DCFG becomes correct. * tag 'imx-fixes-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection ARM: dts: imx7ulp: fix reg of cpu node arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm arm64: dts: ls1028a: fix endian setting for dcfg ARM: dts: imx6q-dhcom: fix rtc compatible Link: https://lore.kernel.org/r/20200110011836.GW4456@T480 Signed-off-by: Olof Johansson <[email protected]>
2020-01-10Merge tag 'amlogic-fixes' of ↵Olof Johansson4-15/+45
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes arm-soc: Amlogic fixes for v5.5-rc * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt dt-bindings: reset: meson8b: fix duplicate reset IDs soc: amlogic: meson-ee-pwrc: propagate errors from pm_genpd_init() soc: amlogic: meson-ee-pwrc: propagate PD provider registration errors ARM: dts: meson8: fix the size of the PMU registers arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQs Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-01-10platform/chrome: wilco_ec: Fix keyboard backlight probingDaniel Campello1-8/+20
The EC on the Wilco platform responds with 0xFF to commands related to the keyboard backlight on the absence of a keyboard backlight module. This change allows the EC driver to continue loading even if the backlight module is not present. Fixes: 119a3cb6d687 ("platform/chrome: wilco_ec: Add keyboard backlight LED support") Signed-off-by: Daniel Campello <[email protected]> Signed-off-by: Enric Balletbo i Serra <[email protected]> Signed-off-by: Benson Leung <[email protected]>
2020-01-10Merge branch 'for-linus' of ↵Linus Torvalds2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fix from Jiri Kosina: "A regression fix for EPOLLOUT handling in hidraw and uhid" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hidraw, uhid: Always report EPOLLOUT
2020-01-10Merge tag 'usb-5.5-rc6' of ↵Linus Torvalds19-93/+243
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of USB and PHY driver fixes for 5.5-rc6 Nothing all that unusual, just the a bunch of small fixes for a lot of different reported issues. The PHY driver fixes are in here as they interacted with the usb drivers. Full details of the patches are in the shortlog, and all of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: missing parentheses in USE_NEW_SCHEME usb: ohci-da8xx: ensure error return on variable error is set usb: musb: Disable pullup at init usb: musb: fix idling for suspend after disconnect interrupt usb: typec: ucsi: Fix the notification bit offsets USB: Fix: Don't skip endpoint descriptors with maxpacket=0 USB-PD tcpm: bad warning+size, PPS adapters phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz usb: chipidea: host: Disable port power only if previously enabled usb: cdns3: should not use the same dev_id for shared interrupt handler usb: dwc3: gadget: Fix request complete check usb: musb: dma: Correct parameter passed to IRQ handler usb: musb: jz4740: Silence error if code is -EPROBE_DEFER usb: udc: tegra: select USB_ROLE_SWITCH USB: core: fix check for duplicate endpoints phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices ...
2020-01-10Merge tag 'char-misc-5.5-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single fix, for the chrdev core, for 5.5-rc6 There's been a long-standing race condition triggered by syzbot, and occasionally real people, in the chrdev open() path. Will finally took the time to track it down and fix it for real before the holidays. Here's that one patch, it's been in linux-next for a while with no reported issues and it does fix the reported problem" * tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: chardev: Avoid potential use-after-free in 'chrdev_open()'
2020-01-10Merge tag 'staging-5.5-rc6' of ↵Linus Torvalds9-8/+38
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some small staging driver fixes for 5.5-rc6. Nothing major here, just some small fixes for a comedi driver, the vt6656 driver, and a new device id for the rtl8188eu driver. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 staging: vt6656: set usb_set_intfdata on driver fail. staging: vt6656: remove bool from vnt_radio_power_on ret staging: vt6656: limit reg output to block size staging: vt6656: correct return of vnt_init_registers. staging: vt6656: Fix non zero logical return of, usb_control_msg
2020-01-10Merge tag 'tty-5.5-rc6' of ↵Linus Torvalds2-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty/serial driver fixes for 5.5-rc6. The first fixes a much much reported issue with a previous tty port link patch that is in your tree, and the second fixes a problem where the serdev driver would claim ACPI devices that it shouldn't be claiming. Both have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serdev: Don't claim unsupported ACPI serial devices tty: always relink the port
2020-01-10Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds7-30/+30
Pull block fixes from Jens Axboe: "A few fixes that should go into this round. This pull request contains two NVMe fixes via Keith, removal of a dead function, and a fix for the bio op for read truncates (Ming)" * tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block: nvmet: fix per feat data len for get_feature nvme: Translate more status codes to blk_status_t fs: move guard_bio_eod() after bio_set_op_attrs block: remove unused mp_bvec_last_segment
2020-01-10Merge tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds1-12/+0
Pull io_uring fix from Jens Axboe: "Single fix for this series, fixing a regression with the short read handling. This just removes it, as it cannot safely be done for all cases" * tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block: io_uring: remove punt of short reads to async context
2020-01-10Merge tag 'mtd/fixes-for-5.5-rc6' of ↵Linus Torvalds8-28/+65
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD: - sm_ftl: Fix NULL pointer warning. Raw NAND: - Cadence: fix compile testing. - STM32: Avoid locking. Onenand: - Fix several sparse/build warnings. SPI-NOR: - Add a flag to fix interaction with Micron parts" * tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: Fix the writing of the Status Register on micron flashes mtd: sm_ftl: fix NULL pointer warning mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy mtd: onenand: samsung: Fix iomem access with regular memcpy mtd: onenand: omap2: Fix errors in style mtd: cadence: Fix cast to pointer from integer of different size warning mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus
2020-01-10Merge tag 'sound-5.5-rc6' of ↵Linus Torvalds11-29/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some of them are for ASoC core error-handling" * tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: enable regmap internal locking ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen ALSA: hda/realtek - Set EAPD control to default for ALC222 ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 ALSA: hda/realtek - Add new codec supported for ALCS1200A ASoC: Intel: boards: Fix compile-testing RT1011/RT5682 ASoC: SOF: imx8: Fix dsp_box offset ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime() ASoC: fsl_audmix: add missed pm_runtime_disable ASoC: stm32: spdifrx: fix input pin state management ASoC: stm32: spdifrx: fix race condition in irq handler ASoC: stm32: spdifrx: fix inconsistent lock state ASoC: core: Fix access to uninitialized list heads ASoC: soc-core: Set dpcm_playback / dpcm_capture ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free ASoC: SOF: fix fault at driver unload after failed probe
2020-01-10Merge tag 'thermal-v5.5-rc5' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fix from Daniel Lezcano: "Fix backward compatibility with old DTBs on QCOM tsens (Amit Kucheria)" * tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: drivers: thermal: tsens: Work with old DTBs
2020-01-10Merge tag 'pm-5.5-rc6' of ↵Linus Torvalds2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry Osipenko) and prevent the Intel RAPL power capping driver from crashing during CPU initialization due to a NULL pointer dereference if the processor model in use is not known to it (Harry Pan)" * tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online() cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
2020-01-10nvmet: fix per feat data len for get_featureAmit Engel1-1/+11
The existing implementation for the get_feature admin-cmd does not use per-feature data len. This patch introduces a new helper function nvmet_feat_data_len(), which is used to calculate per feature data len. Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID). Fixes: commit e9061c397839 ("nvmet: Remove the data_len field from the nvmet_req struct") Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Amit Engel <[email protected]> [endiness, naming, and kernel style fixes] Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-10nvme: Translate more status codes to blk_status_tKeith Busch1-0/+2
Decode interrupted command and not ready namespace nvme status codes to BLK_STS_TARGET. These are not generic IO errors and should use a non-path specific error so that it can use the non-failover retry path. Reported-by: John Meneghini <[email protected]> Cc: Hannes Reinecke <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-10HID: hidraw, uhid: Always report EPOLLOUTJiri Kosina2-5/+7
hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by: Linus Torvalds <[email protected]> Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by: Jiri Kosina <[email protected]>
2020-01-10ASoC: stm32: dfsdm: fix 16 bits recordOlivier Moysan1-6/+6
In stm32_afsdm_pcm_cb function, the transfer size is provided in bytes. However, samples are copied as 16 bits words from iio buffer. Divide by two the transfer size, to copy the right number of samples. Fixes: 1e7f6e1c69f0 ("ASoC: stm32: dfsdm: add 16 bits audio record support") Signed-off-by: Olivier Moysan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-01-10Merge branch 'powercap'Rafael J. Wysocki1-0/+3
* powercap: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()
2020-01-10scsi: enclosure: Fix stale device oops with hot replugJames Bottomley1-2/+1
Doing an add/remove/add on a SCSI device in an enclosure leads to an oops caused by poisoned values in the enclosure device list pointers. The reason is because we are keeping the enclosure device across the enclosed device add/remove/add but the current code is doing a device_add/device_del/device_add on it. This is the wrong thing to do in sysfs, so fix it by not doing a device_del on the enclosure device simply because of a hot remove of the drive in the slot. [mkp: added missing email addresses] Fixes: 43d8eb9cfd0a ("[SCSI] ses: add support for enclosure component hot removal") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: James Bottomley <[email protected]> Reported-by: Luo Jiaxing <[email protected]> Tested-by: John Garry <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-01-10scsi: sd: Clear sdkp->protection_type if disk is reformatted without PIXiang Chen1-1/+3
If an attached disk with protection information enabled is reformatted to Type 0 the revalidation code does not clear the original protection type and subsequent accesses will keep setting RDPROTECT/WRPROTECT. Set the protection type to 0 if the disk reports PROT_EN=0 in READ CAPACITY(16). [mkp: commit desc] Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Xiang Chen <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-01-09Merge tag 'pstore-v5.5-rc6' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fix from Kees Cook: "Cengiz Can forwarded a Coverity report about more problems with a rare pstore initialization error path, so the allocation lifetime was rearranged to avoid needing to share the kfree() responsibilities between caller and callee" * tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Regularize prz label allocation lifetime
2020-01-09Merge tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-61/+85
Pull drm fixes from Dave Airlie: "Pre-LCA pull request I'm not sure how things will look next week, myself and Daniel are at LCA and I'm speaking quite late, so if I get my talk finished I'll probably process fixes. This week has a bunch of i915 fixes, some amdgpu fixes, one sun4i, one core MST, and one core fb_helper fix. More details below: core: - mst Fix NO_STOP_BIT bit offset (Wayne) fb_helper: - fb_helper: Fix bits_per_pixel param set behavior to round up (Geert) sun4i: - Fix RGB_DIV clock min divider on old hardware (Chen-Yu) amdgpu: - Stability fix for raven - Reduce pixel encoding to if max clock is exceeded on HDMI to allow additional high res modes - enable DRIVER_SYNCOBJ_TIMELINE for amdgpu i915: - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state - Fix GitLab issue #846: Restore coarse power gating that was disabled by initial RC66 context corruption security fixes. - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") to avoid screen flicker - Fix to fill in unitialized uabi_instance in virtual engine uAPI - Add two missing W/As for ICL and EHL" * tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded Revert "drm/amdgpu: Set no-retry as default." drm/fb-helper: Round up bits_per_pixel if possible drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model drm/i915/dp: Disable Port sync mode correctly on teardown drm/i915: Add Wa_1407352427:icl,ehl drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl drm/i915/gt: Restore coarse power gating drm/i915/gt: Do not restore invalid RS state drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only drm/i915/gt: Mark up virtual engine uabi_instance drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ
2020-01-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds5-16/+27
Pull rdma fixes from Jason Gunthorpe: "First RDMA subsystem updates for 5.5-rc. A very small set of fixes, most people seem to still be recovering from December! Five small driver fixes: - Fix error flow with MR allocation in bnxt_re - An errata work around for bnxt_re - Misuse of the workqueue API in hfi1 - Protocol error in hfi1 - Regression in 5.5 related to the mmap rework with i40iw" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: i40iw: Remove setting of VMA private data and use rdma_user_mmap_io IB/hfi1: Adjust flow PSN with the correct resync_psn IB/hfi1: Don't cancel unused work item RDMA/bnxt_re: Fix Send Work Entry state check while polling completions RDMA/bnxt_re: Avoid freeing MR resources if dereg fails
2020-01-10Merge tag 'drm-intel-fixes-2020-01-09-1' of ↵Dave Airlie7-31/+38
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state - Fix GitLab issue #846: Restore coarse power gating that was disabled by initial RC66 context corruption security fixes. - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") to avoid screen flicker - Fix to fill in unitialized uabi_instance in virtual engine uAPI - Add two missing W/As for ICL and EHL Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.