aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08Merge tag 'pm-5.11-rc3' of ↵Linus Torvalds2-18/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address two issues in the intel_pstate driver and one in the powernow-k8 cpufreq driver. Specifics: - Make the powernow-k8 cpufreq driver avoid calling cpufreq_cpu_get(), which theoretically may return NULL, to get a policy pointer that is known to it already (Colin Ian King) - Drop two functions that are not used any more from the intel_pstate driver (Lukas Bulwahn) - Make intel_pstate check the HWP capabilities to get the maximum available P-state in the passive mode to avoid using a stale value of it in case of out-of-band updates (Rafael Wysocki)" * tag 'pm-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: remove obsolete functions cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get() cpufreq: intel_pstate: Use HWP capabilities in intel_cpufreq_adjust_perf()
2021-01-08Merge tag 'drm-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds47-177/+302
Pull drm fixes from Daniel Vetter: "Looks like people are back from the break, usual small pile of fixes all over. Next week Dave should be back. The only thing pending I'm aware of is a "this shouldn't have become uapi" reverts for amdgpu, but they're already on the list and not that important really so can wait another week. Summary: - fix for ttm list corruption in radeon, reported by a few people - fixes for amdgpu, i915, msm - dma-buf use-after free fix" * tag 'drm-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/msm: Only enable A6xx LLCC code on A6xx drm/msm: Add modparam to allow vram carveout drm/msm: Call msm_init_vram before binding the gpu drm/msm/dp: postpone irq_hpd event during connection pending state drm/ttm: unexport ttm_pool_init/fini drm/radeon: stop re-init the TTM page pool dmabuf: fix use-after-free of dmabuf's file->f_inode Revert "drm/amd/display: Fix memory leaks in S3 resume" drm/amdgpu/display: drop DCN support for aarch64 drm/amdgpu: enable ras eeprom support for sienna cichlid drm/amdgpu: fix no bad_pages issue after umc ue injection drm/amdgpu: fix potential memory leak during navi12 deinitialization drm/amd/display: Fix unused variable warning drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO drm/amd/pm: fix the failure when change power profile for renoir drm/amdgpu: fix a GPU hang issue when remove device drm/amdgpu: fix a memory protection fault when remove amdgpu device drm/amdgpu: switched to cached noretry setting for vangogh drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue drm/amd/pm: updated PM to I2C controller port on sienna cichlid ...
2021-01-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds45-655/+667
Pull kvm fixes from Paolo Bonzini: "x86: - Fixes for the new scalable MMU - Fixes for migration of nested hypervisors on AMD - Fix for clang integrated assembler - Fix for left shift by 64 (UBSAN) - Small cleanups - Straggler SEV-ES patch ARM: - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access Misc: - selftests cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits) KVM: x86: __kvm_vcpu_halt can be static KVM: SVM: Add support for booting APs in an SEV-ES guest KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode KVM: nSVM: correctly restore nested_run_pending on migration KVM: x86/mmu: Clarify TDP MMU page list invariants KVM: x86/mmu: Ensure TDP MMU roots are freed after yield kvm: check tlbs_dirty directly KVM: x86: change in pv_eoi_get_pending() to make code more readable MAINTAINERS: Really update email address for Sean Christopherson KVM: x86: fix shift out of bounds reported by UBSAN KVM: selftests: Implement perf_test_util more conventionally KVM: selftests: Use vm_create_with_vcpus in create_vm KVM: selftests: Factor out guest mode code KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte() KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte() ...
2021-01-08Merge tag 'iommu-fixes' of ↵Linus Torvalds10-91/+147
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull iommu fixes from Will Deacon: "This is mainly all Intel VT-D stuff, but there are some fixes for AMD and ARM as well. We've also got the revert I promised during the merge window, which removes a temporary hack to accomodate i915 while we transitioned the Intel IOMMU driver over to the common DMA-IOMMU API. Finally, there are still a couple of other VT-D fixes floating around, so I expect to send you another batch of fixes next week. Summary: - Fix VT-D TLB invalidation for subdevices - Fix VT-D use-after-free on subdevice detach - Fix VT-D locking so that IRQs are disabled during SVA bind/unbind - Fix VT-D address alignment when flushing IOTLB - Fix memory leak in VT-D IRQ remapping failure path - Revert temporary i915 sglist hack now that it is no longer required - Fix sporadic boot failure with Arm SMMU on Qualcomm SM8150 - Fix NULL dereference in AMD IRQ remapping code with remapping disabled - Fix accidental enabling of irqs on AMD resume-from-suspend path - Fix some typos in comments" * tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: iommu/vt-d: Fix ineffective devTLB invalidation for subdevices iommu/vt-d: Fix general protection fault in aux_detach_device() iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_dev iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context iommu/vt-d: Fix lockdep splat in sva bind()/unbind() Revert "iommu: Add quirk for Intel graphic devices in map_sg" iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb() iommu/amd: Stop irq_remapping_select() matching when remapping is disabled iommu/amd: Set iommu->int_enabled consistently when interrupts are set up iommu/intel: Fix memleak in intel_irq_remapping_alloc iommu/iova: fix 'domain' typos
2021-01-08ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devicesTakashi Iwai1-10/+38
Pioneer devices have both playback and capture streams sharing the same iface/altsetting, and those need to be paired as implicit feedback. Instead of a half-baked (and broken) static quirk entry, set up more generically for those devices by checking the number of endpoints and the attribute of the secondary EP. Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") Reported-by: František Kučera <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-08ALSA: usb-audio: Annotate the endpoint index in audioformatTakashi Iwai4-3/+10
There are devices that have multiple endpoints sharing the same iface/altset not only for sync but also for the actual streams, and the audioformat for such an endpoint needs to be handled with the proper endpoint index; otherwise it confuses the endpoint management. This patch extends the audioformat to annotate the endpoint index, and put the proper ep_idx=1 to Pioneer device quirk entries accordingly. Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-08ALSA: usb-audio: Avoid unnecessary interface re-setupTakashi Iwai5-15/+77
The current endpoint handling assumed (more or less) a unique 1:1 relation between the endpoint and the iface/altset. The exception was the sync EP without the implicit feedback which has usually the secondary EP of the same altset. This works fine for most devices, but it turned out that some unusual devices like Pinoeer's ones have both playback and capture endpoints in the same iface/altsetting and use both for the implicit feedback mode. For handling such a case, we need to extend the endpoint management to take the shared interface into account. This patch does that: it adds a new object snd_usb_iface_ref for managing the reference counts of the each USB interface that is used by each endpoint. The interface setup is performed only once for the (sharing) endpoints, and the doubly initialization is avoided. Along with this, the resource release of endpoints and interface refcounts are put into a single function, snd_usb_endpoint_free_all() instead of looping in the caller side. Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-08ALSA: usb-audio: Choose audioformat of a counter-part substreamTakashi Iwai1-5/+4
The implicit feedback mode needs to handle two endpoints and the choice of the audioformat object for the sync EP is important since this determines the compatibility of the hw_params. The current code uses the same audioformat object if both the main EP and the sync EP point to the same iface/altsetting. This was done in consideration of the non-implicit-fb sync EP handling, and it doesn't match well with the cases where actually to endpoints are defined in the sameiface / altsetting like a few Pioneer devices. Modify snd_usb_find_implicit_fb_sync_format() to pick up the audioformat that is assigned in the counter-part substreams primarily, so that the actual capture stream can be opened properly. We keep the same audioformat object only as a fallback in case nothing found, though. Fixes: 9fddc15e8039 ("ALSA: usb-audio: Factor out the implicit feedback quirk code") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-08ALSA: usb-audio: Fix the missing endpoints creations for quirksTakashi Iwai1-10/+44
The recent change in the endpoint management moved the endpoint object creation from the stream open time to the parser of the audio descriptor. It works fine for the standard audio, but it overlooked the other places that create audio streams via quirks (QUIRK_AUDIO_FIXED_ENDPOINT) like the reported a few Pioneer devices; those call snd_usb_add_audio_stream() manually, hence they miss the endpoints, eventually resulting in the error at opening streams. Moreover, now the sync EP setup was moved to the explicit call of snd_usb_audioformat_set_sync_ep(), and this needs to be added for those places, too. This patch addresses those regressions for quirks. It adds a local helper function add_audio_stream_from_fixed_fmt(), which does the all needed tasks, and replaces the calls of snd_usb_add_audio_stream() with this new function. Fixes: 54cb31901b83 ("ALSA: usb-audio: Create endpoint objects at parsing phase") Reported-by: František Kučera <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-08Merge tag 'arm-fixes-5.11-1' of ↵Linus Torvalds7-8/+23
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a small number of bug fixes that all came in before or during the merge window, most for the omap platform: - One boot regression fix for Nokia N9 (OMAP3). - Two small defconfig changes for omap2, to reflect changes in drivers - Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs. The picoxcell platform will be removed in v5.12, but fixing it first makes it easier to backport to the fix to stable kernels and get a clean build with new dtc versions" * tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: picoxcell: fix missing interrupt-parent properties ARM: dts: ux500/golden: Set display max brightness arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios" ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 ARM: omap2plus_defconfig: enable SPI GPIO ARM: OMAP2+: omap_device: fix idling of devices during probe ARM: dts: OMAP3: disable AES on N950/N9 ARM: omap2plus_defconfig: drop unused POWER_AVS option
2021-01-08Merge tag 'arm64-fixes' of ↵Linus Torvalds10-18/+27
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Clean-ups following the merging window: remove unused variable, duplicate includes, superfluous barrier, move some inline asm to separate functions. - Disable top-byte-ignore on kernel code addresses with KASAN/MTE enabled (already done when MTE is disabled). - Fix ARCH_LOW_ADDRESS_LIMIT definition with CONFIG_ZONE_DMA disabled. - Compiler/linker flags: link with "-z norelno", discard .eh_frame_hdr instead of --no-eh-frame-hdr. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Move PSTATE.TCO setting to separate functions arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabled arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdr arm64: traps: remove duplicate include statement arm64: link with -z norelro for LLD or aarch64-elf arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA arm64: mte: remove an ISB on kernel exit arm64/smp: Remove unused irq variable in arch_show_interrupts()
2021-01-08ARC: [hsdk]: Enable FPU_SAVE_RESTOREVineet Gupta1-0/+1
HSDK has hardware floating point and the common use case is with glibc+hf so enable that as default. Signed-off-by: Vineet Gupta <[email protected]>
2021-01-08dm integrity: fix flush with external metadata deviceMikulas Patocka3-11/+56
With external metadata device, flush requests are not passed down to the data device. Fix this by submitting the flush request in dm_integrity_flush_buffers. In order to not degrade performance, we overlap the data device flush with the metadata device flush. Reported-by: Lukas Straub <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Signed-off-by: Mike Snitzer <[email protected]>
2021-01-08dm: eliminate potential source of excessive kernel log noiseMike Snitzer1-1/+1
There wasn't ever a real need to log an error in the kernel log for ioctls issued with insufficient permissions. Simply return an error and if an admin/user is sufficiently motivated they can enable DM's dynamic debugging to see an explanation for why the ioctls were disallowed. Reported-by: Nir Soffer <[email protected]> Fixes: e980f62353c6 ("dm: don't allow ioctls to targets that don't map to whole devices") Signed-off-by: Mike Snitzer <[email protected]>
2021-01-08Merge tag 'net-5.11-rc3-2' of ↵Linus Torvalds66-309/+746
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull more networking fixes from Jakub Kicinski: "Slightly lighter pull request to get back into the Thursday cadence. Current release - always broken: - can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions - dsa: hellcreek: fix led_classdev build errors Previous releases - regressions: - ipv6: fib: flush exceptions when purging route to avoid netdev reference leak - ip_tunnels: fix pmtu check in nopmtudisc mode - ip: always refragment ip defragmented packets to avoid MTU issues when forwarding through tunnels, correct "packet too big" message is prohibitively tricky to generate - s390/qeth: fix locking for discipline setup / removal and during recovery to prevent both deadlocks and races - mlx5: Use port_num 1 instead of 0 when delete a RoCE address Previous releases - always broken: - cdc_ncm: correct overhead calculation in delayed_ndp_size to prevent out of bound accesses with Huawei 909s-120 LTE module - fix stmmac dwmac-sun8i suspend/resume: - PHY being left powered off - MAC syscon configuration being reset - reference to the reset controller being improperly dropped - qrtr: fix null-ptr-deref in qrtr_ns_remove - can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver - mlx5e: CT: Use per flow counter when CT flow accounting is enabled - mlx5e: Fix SWP offsets when vlan inserted by driver Misc: - bpf: Fix a task_iter bug caused by a bpf -> net merge conflict resolution And the usual many fixes to various error paths" * tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE s390/qeth: fix L2 header access in qeth_l3_osa_features_check() s390/qeth: fix locking for discipline setup / removal s390/qeth: fix deadlock during recovery selftests: fib_nexthops: Fix wrong mausezahn invocation nexthop: Bounce NHA_GATEWAY in FDB nexthop groups nexthop: Unlink nexthop group entry in error path nexthop: Fix off-by-one error in error path octeontx2-af: fix memory leak of lmac and lmac->name chtls: Fix chtls resources release sequence chtls: Added a check to avoid NULL pointer dereference chtls: Replace skb_dequeue with skb_peek chtls: Avoid unnecessary freeing of oreq pointer chtls: Fix panic when route to peer not configured chtls: Remove invalid set_tcb call chtls: Fix hardware tid leak net: ip: always refragment ip defragmented packets net: fix pmtu check in nopmtudisc mode selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking docs: octeontx2: tune rst markup ...
2021-01-08Merge branch 'linus' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a functional bug in arm/chacha-neon as well as a potential buffer overflow in ecdh" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ecdh - avoid buffer overflow in ecdh_set_secret() crypto: arm/chacha-neon - add missing counter increment
2021-01-08poll: fix performance regression due to out-of-line __put_user()Linus Torvalds1-3/+11
The kernel test robot reported a -5.8% performance regression on the "poll2" test of will-it-scale, and bisected it to commit d55564cfc222 ("x86: Make __put_user() generate an out-of-line call"). I didn't expect an out-of-line __put_user() to matter, because no normal core code should use that non-checking legacy version of user access any more. But I had overlooked the very odd poll() usage, which does a __put_user() to update the 'revents' values of the poll array. Now, Al Viro correctly points out that instead of updating just the 'revents' field, it would be much simpler to just copy the _whole_ pollfd entry, and then we could just use "copy_to_user()" on the whole array of entries, the same way we use "copy_from_user()" a few lines earlier to get the original values. But that is not what we've traditionally done, and I worry that threaded applications might be concurrently modifying the other fields of the pollfd array. So while Al's suggestion is simpler - and perhaps worth trying in the future - this instead keeps the "just update revents" model. To fix the performance regression, use the modern "unsafe_put_user()" instead of __put_user(), with the proper "user_write_access_begin()" guarding in place. This improves code generation enormously. Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/ Reported-by: kernel test robot <[email protected]> Tested-by: Oliver Sang <[email protected]> Cc: Al Viro <[email protected]> Cc: David Laight <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-01-08Revert "init/console: Use ttynull as a fallback when there is no console"Petr Mladek5-30/+18
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/[email protected]/ [2] https://lore.kernel.org/lkml/[email protected]/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/[email protected]/ Reported-by: Andy Shevchenko <[email protected]> Reported-by: Vineet Gupta <[email protected]> Reported-by: Thomas Meyer <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-01-08Merge branches 'acpi-scan' and 'acpi-misc'Rafael J. Wysocki2-6/+7
* acpi-scan: ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI * acpi-misc: ACPI: Update Kconfig help text for items that are no longer modular
2021-01-08HID: Ignore battery for Elan touchscreen on ASUS UX550Seth Miller2-0/+3
Battery status is being reported for the Elan touchscreen on ASUS UX550 laptops despite not having a batter. It always shows either 0 or 1%. Signed-off-by: Seth Miller <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2021-01-08btrfs: shrink delalloc pages instead of full inodesJosef Bacik2-18/+46
Commit 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") cleaned up how we do delalloc shrinking by utilizing some infrastructure we have in place to flush inodes that we use for device replace and snapshot. However this introduced a pretty serious performance regression. To reproduce the user untarred the source tarball of Firefox (360MiB xz compressed/1.5GiB uncompressed), and would see it take anywhere from 5 to 20 times as long to untar in 5.10 compared to 5.9. This was observed on fast devices (SSD and better) and not on HDD. The root cause is because before we would generally use the normal writeback path to reclaim delalloc space, and for this we would provide it with the number of pages we wanted to flush. The referenced commit changed this to flush that many inodes, which drastically increased the amount of space we were flushing in certain cases, which severely affected performance. We cannot revert this patch unfortunately because of 3d45f221ce62 ("btrfs: fix deadlock when cloning inline extent and low on free metadata space") which requires the ability to skip flushing inodes that are being cloned in certain scenarios, which means we need to keep using our flushing infrastructure or risk re-introducing the deadlock. Instead to fix this problem we can go back to providing btrfs_start_delalloc_roots with a number of pages to flush, and then set up a writeback_control and utilize sync_inode() to handle the flushing for us. This gives us the same behavior we had prior to the fix, while still allowing us to avoid the deadlock that was fixed by Filipe. I redid the users original test and got the following results on one of our test machines (256GiB of ram, 56 cores, 2TiB Intel NVMe drive) 5.9 0m54.258s 5.10 1m26.212s 5.10+patch 0m38.800s 5.10+patch is significantly faster than plain 5.9 because of my patch series "Change data reservations to use the ticketing infra" which contained the patch that introduced the regression, but generally improved the overall ENOSPC flushing mechanisms. Additional testing on consumer-grade SSD (8GiB ram, 8 CPU) confirm the results: 5.10.5 4m00s 5.10.5+patch 1m08s 5.11-rc2 5m14s 5.11-rc2+patch 1m30s Reported-by: René Rebe <[email protected]> Fixes: 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") CC: [email protected] # 5.10 Signed-off-by: Josef Bacik <[email protected]> Tested-by: David Sterba <[email protected]> Reviewed-by: David Sterba <[email protected]> [ add my test results ] Signed-off-by: David Sterba <[email protected]>
2021-01-08hwmon: (amd_energy) fix allocation of hwmon_channel_info configDavid Arcari1-1/+2
hwmon, specifically hwmon_num_channel_attrs, expects the config array in the hwmon_channel_info structure to be terminated by a zero entry. amd_energy does not honor this convention. As result, a KASAN warning is possible. Fix this by adding an additional entry and setting it to zero. Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Signed-off-by: David Arcari <[email protected]> Cc: Naveen Krishna Chatradhi <[email protected]> Cc: Jean Delvare <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: David Arcari <[email protected]> Acked-by: Naveen Krishna Chatradhi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2021-01-08ARM: picoxcell: fix missing interrupt-parent propertiesArnd Bergmann1-0/+4
dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]>
2021-01-08blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHAREDJohn Garry1-0/+1
Showing the hctx flags for when BLK_MQ_F_TAG_HCTX_SHARED is set gives something like: root@debian:/home/john# more /sys/kernel/debug/block/sda/hctx0/flags alloc_policy=FIFO SHOULD_MERGE|TAG_QUEUE_SHARED|3 Add the decoding for that flag. Fixes: 32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: John Garry <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-08block/rnbd-clt: avoid module unload race with close confirmationJack Wang1-1/+2
We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <[email protected]> Reviewed-by: Gioh Kim <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-08block/rnbd: Adding name to the Contributors ListSwapnil Ingle1-0/+1
Adding name to the Contributors List Signed-off-by: Swapnil Ingle <[email protected]> Acked-by: Jack Wang <[email protected]> Acked-by: Danil Kipnis <[email protected]> Signed-off-by: Jack Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-08block/rnbd-clt: Fix sg table use after freeGuoqing Jiang1-8/+7
Since dynamically allocate sglist is used for rnbd_iu, we can't free sg table after send_usr_msg since the callback function (cqe.done) could still access the sglist. Otherwise KASAN reports UAF issue: [ 4856.600257] BUG: KASAN: use-after-free in dma_direct_unmap_sg+0x53/0x290 [ 4856.600772] Read of size 4 at addr ffff888206af3a98 by task swapper/1/0 [ 4856.601729] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G W 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 4856.601748] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 4856.601766] Call Trace: [ 4856.601785] <IRQ> [ 4856.601822] dump_stack+0x99/0xcb [ 4856.601856] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.601888] print_address_description.constprop.7+0x1e/0x230 [ 4856.601913] ? freeze_kernel_threads+0x73/0x73 [ 4856.601965] ? mark_held_locks+0x29/0xa0 [ 4856.602019] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602039] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602079] kasan_report.cold.9+0x37/0x7c [ 4856.602188] ? mlx5_ib_post_recv+0x430/0x520 [mlx5_ib] [ 4856.602209] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602256] dma_direct_unmap_sg+0x53/0x290 [ 4856.602366] complete_rdma_req+0x188/0x4b0 [rtrs_client] [ 4856.602451] ? rtrs_clt_close+0x80/0x80 [rtrs_client] [ 4856.602535] ? mlx5_ib_poll_cq+0x48b/0x16e0 [mlx5_ib] [ 4856.602589] ? radix_tree_insert+0x3a0/0x3a0 [ 4856.602610] ? do_raw_spin_lock+0x119/0x1d0 [ 4856.602647] ? rwlock_bug.part.1+0x60/0x60 [ 4856.602740] rtrs_clt_rdma_done+0x3f7/0x670 [rtrs_client] [ 4856.602804] ? rtrs_clt_rdma_cm_handler+0xda0/0xda0 [rtrs_client] [ 4856.602857] ? check_flags.part.31+0x6c/0x1f0 [ 4856.602927] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 4856.602963] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 4856.603137] __ib_process_cq+0x10a/0x350 [ib_core] [ 4856.603309] ib_poll_handler+0x41/0x1c0 [ib_core] [ 4856.603358] irq_poll_softirq+0xe6/0x280 [ 4856.603392] ? lockdep_hardirqs_on_prepare+0x111/0x210 [ 4856.603446] __do_softirq+0x10d/0x646 [ 4856.603540] asm_call_irq_on_stack+0x12/0x20 [ 4856.603563] </IRQ> [ 4856.605096] Allocated by task 8914: [ 4856.605510] kasan_save_stack+0x19/0x40 [ 4856.605532] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 4856.605552] __kmalloc+0x155/0x320 [ 4856.605574] __sg_alloc_table+0x155/0x1c0 [ 4856.605594] sg_alloc_table+0x1f/0x50 [ 4856.605620] send_msg_sess_info+0x119/0x2e0 [rnbd_client] [ 4856.605646] remap_devs+0x71/0x210 [rnbd_client] [ 4856.605676] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.605706] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.605728] process_one_work+0x521/0xa90 [ 4856.605748] worker_thread+0x65/0x5b0 [ 4856.605769] kthread+0x1f2/0x210 [ 4856.605789] ret_from_fork+0x22/0x30 [ 4856.606159] Freed by task 8914: [ 4856.606559] kasan_save_stack+0x19/0x40 [ 4856.606580] kasan_set_track+0x1c/0x30 [ 4856.606601] kasan_set_free_info+0x1b/0x30 [ 4856.606622] __kasan_slab_free+0x108/0x150 [ 4856.606642] slab_free_freelist_hook+0x64/0x190 [ 4856.606661] kfree+0xe2/0x650 [ 4856.606681] __sg_free_table+0xa4/0x100 [ 4856.606707] send_msg_sess_info+0x1d6/0x2e0 [rnbd_client] [ 4856.606733] remap_devs+0x71/0x210 [rnbd_client] [ 4856.606763] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.606792] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.606813] process_one_work+0x521/0xa90 [ 4856.606833] worker_thread+0x65/0x5b0 [ 4856.606853] kthread+0x1f2/0x210 [ 4856.606872] ret_from_fork+0x22/0x30 The solution is to free iu's sgtable after the iu is not used anymore. And also move sg_alloc_table into rnbd_get_iu accordingly. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Jack Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-08block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_closeJack Wang1-3/+5
KASAN detect following BUG: [ 778.215311] ================================================================== [ 778.216696] BUG: KASAN: use-after-free in rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.219037] Read of size 8 at addr ffff88b1d6516c28 by task tee/8842 [ 778.220500] CPU: 37 PID: 8842 Comm: tee Kdump: loaded Not tainted 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 778.220529] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 778.220555] Call Trace: [ 778.220609] dump_stack+0x99/0xcb [ 778.220667] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220715] print_address_description.constprop.7+0x1e/0x230 [ 778.220750] ? freeze_kernel_threads+0x73/0x73 [ 778.220896] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220932] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220994] kasan_report.cold.9+0x37/0x7c [ 778.221066] ? kobject_put+0x80/0x270 [ 778.221102] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221184] rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221240] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.221304] ? sysfs_file_ops+0x90/0x90 [ 778.221353] kernfs_fop_write+0x141/0x240 [ 778.221451] vfs_write+0x142/0x4d0 [ 778.221553] ksys_write+0xc0/0x160 [ 778.221602] ? __ia32_sys_read+0x50/0x50 [ 778.221684] ? lockdep_hardirqs_on_prepare+0x13d/0x210 [ 778.221718] ? syscall_enter_from_user_mode+0x1c/0x50 [ 778.221821] do_syscall_64+0x33/0x40 [ 778.221862] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.221896] RIP: 0033:0x7f4affdd9504 [ 778.221928] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 778.221956] RSP: 002b:00007fffebb36b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 778.222011] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f4affdd9504 [ 778.222038] RDX: 0000000000000002 RSI: 00007fffebb36c50 RDI: 0000000000000003 [ 778.222066] RBP: 00007fffebb36c50 R08: 0000556a151aa600 R09: 00007f4affeb1540 [ 778.222094] R10: fffffffffffffc19 R11: 0000000000000246 R12: 0000556a151aa520 [ 778.222121] R13: 0000000000000002 R14: 00007f4affea6760 R15: 0000000000000002 [ 778.222764] Allocated by task 3212: [ 778.223285] kasan_save_stack+0x19/0x40 [ 778.223316] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 778.223347] kmem_cache_alloc_trace+0x186/0x350 [ 778.223382] rnbd_srv_rdma_ev+0xf16/0x1690 [rnbd_server] [ 778.223422] process_io_req+0x4d1/0x670 [rtrs_server] [ 778.223573] __ib_process_cq+0x10a/0x350 [ib_core] [ 778.223709] ib_cq_poll_work+0x31/0xb0 [ib_core] [ 778.223743] process_one_work+0x521/0xa90 [ 778.223773] worker_thread+0x65/0x5b0 [ 778.223802] kthread+0x1f2/0x210 [ 778.223833] ret_from_fork+0x22/0x30 [ 778.224296] Freed by task 8842: [ 778.224800] kasan_save_stack+0x19/0x40 [ 778.224829] kasan_set_track+0x1c/0x30 [ 778.224860] kasan_set_free_info+0x1b/0x30 [ 778.224889] __kasan_slab_free+0x108/0x150 [ 778.224919] slab_free_freelist_hook+0x64/0x190 [ 778.224947] kfree+0xe2/0x650 [ 778.224982] rnbd_destroy_sess_dev+0x2fa/0x3b0 [rnbd_server] [ 778.225011] kobject_put+0xda/0x270 [ 778.225046] rnbd_srv_sess_dev_force_close+0x30/0x60 [rnbd_server] [ 778.225081] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.225111] kernfs_fop_write+0x141/0x240 [ 778.225140] vfs_write+0x142/0x4d0 [ 778.225169] ksys_write+0xc0/0x160 [ 778.225198] do_syscall_64+0x33/0x40 [ 778.225227] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.226506] The buggy address belongs to the object at ffff88b1d6516c00 which belongs to the cache kmalloc-512 of size 512 [ 778.227464] The buggy address is located 40 bytes inside of 512-byte region [ffff88b1d6516c00, ffff88b1d6516e00) The problem is in the sess_dev release function we call rnbd_destroy_sess_dev, and could free the sess_dev already, but we still set the keep_id in rnbd_srv_sess_dev_force_close, which lead to use after free. To fix it, move the keep_id before the sysfs removal, and cache the rnbd_srv_session for lock accessing, Fixes: 786998050cbc ("block/rnbd-srv: close a mapped device from server side.") Signed-off-by: Jack Wang <[email protected]> Reviewed-by: Guoqing Jiang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-08block/rnbd: Select SG_POOL for RNBD_CLIENTJack Wang1-0/+1
lkp reboot following build error: drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn': >> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration] 387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT); | ^~~~~~~~~~~~~~~~~~~~~ The reason is CONFIG_SG_POOL is not enabled in the config, to avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Reported-by: kernel test robot <[email protected]> Signed-off-by: Jack Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-08HID: logitech-dj: add the G602 receiverFilipe Laíns1-0/+4
Tested. The device gets correctly exported to userspace and I can see mouse and keyboard events. Signed-off-by: Filipe Laíns <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2021-01-08KVM: x86: __kvm_vcpu_halt can be staticPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <[email protected]>
2021-01-08Merge tag 'kvmarm-fixes-5.11-1' of ↵Paolo Bonzini19-118/+122
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #1 - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access
2021-01-08Merge tag 'drm-misc-fixes-2021-01-08' of ↵Daniel Vetter3-9/+17
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * dma-buf: fix a use-after-free * radeon: don't init the TTM page pool manually * ttm: unexport ttm_pool_{init,fini}() Signed-off-by: Daniel Vetter <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/X/gnKs52t8xUuAlE@linux-uq9g
2021-01-08Merge tag 'drm-msm-fixes-2021-01-07' of ↵Daniel Vetter10-26/+63
https://gitlab.freedesktop.org/drm/msm into drm-fixes A few misc fixes from Rob, mostly fallout from the locking rework that landed in the merge window, plus a few smaller things. Signed-off-by: Daniel Vetter <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtWMhzyD6kejmViZeZ+zfJxRvfq-R2t_zA+DcDiTxsYRQ@mail.gmail.com
2021-01-08x86/resctrl: Don't move a task to the same resource groupFenghua Yu1-0/+7
Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <[email protected]> Signed-off-by: Fenghua Yu <[email protected]> Signed-off-by: Reinette Chatre <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Tony Luck <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com
2021-01-08x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSRFenghua Yu1-69/+43
Currently, when moving a task to a resource group the PQR_ASSOC MSR is updated with the new closid and rmid in an added task callback. If the task is running, the work is run as soon as possible. If the task is not running, the work is executed later in the kernel exit path when the kernel returns to the task again. Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task is running is the right thing to do. Queueing work for a task that is not running is unnecessary (the PQR_ASSOC MSR is already updated when the task is scheduled in) and causing system resource waste with the way in which it is implemented: Work to update the PQR_ASSOC register is queued every time the user writes a task id to the "tasks" file, even if the task already belongs to the resource group. This could result in multiple pending work items associated with a single task even if they are all identical and even though only a single update with most recent values is needed. Specifically, even if a task is moved between different resource groups while it is sleeping then it is only the last move that is relevant but yet a work item is queued during each move. This unnecessary queueing of work items could result in significant system resource waste, especially on tasks sleeping for a long time. For example, as demonstrated by Shakeel Butt in [1] writing the same task id to the "tasks" file can quickly consume significant memory. The same problem (wasted system resources) occurs when moving a task between different resource groups. As pointed out by Valentin Schneider in [2] there is an additional issue with the way in which the queueing of work is done in that the task_struct update is currently done after the work is queued, resulting in a race with the register update possibly done before the data needed by the update is available. To solve these issues, update the PQR_ASSOC MSR in a synchronous way right after the new closid and rmid are ready during the task movement, only if the task is running. If a moved task is not running nothing is done since the PQR_ASSOC MSR will be updated next time the task is scheduled. This is the same way used to update the register when tasks are moved as part of resource group removal. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ [2] https://lore.kernel.org/lkml/[email protected] [ bp: Massage commit message and drop the two update_task_closid_rmid() variants. ] Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <[email protected]> Reported-by: Valentin Schneider <[email protected]> Signed-off-by: Fenghua Yu <[email protected]> Signed-off-by: Reinette Chatre <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Tony Luck <[email protected]> Reviewed-by: James Morse <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com
2021-01-07block: pre-initialize struct block_device in bdev_alloc_inodeChristoph Hellwig1-2/+3
bdev_evict_inode and bdev_free_inode are also called for the root inode of bdevfs, for which bdev_alloc is never called. Move the zeroing o f struct block_device and the initialization of the bd_bdi field into bdev_alloc_inode to make sure they are initialized for the root inode as well. Fixes: e6cb53827ed6 ("block: initialize struct block_device in bdev_alloc") Reported-by: Alexey Kardashevskiy <[email protected]> Tested-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-07Merge tag 'mlx5-fixes-2021-01-07' of ↵Jakub Kicinski13-66/+122
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-01-07 * tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups net/mlx5e: Fix two double free cases net/mlx5: Release devlink object if adev fails net/mlx5e: ethtool, Fix restriction of autoneg with 56G net/mlx5e: In skb build skip setting mark in switchdev mode net/mlx5: E-Switch, fix changing vf VLANID net/mlx5e: Fix SWP offsets when vlan inserted by driver net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address net/mlx5e: Add missing capability check for uplink follow net/mlx5: Check if lag is supported before creating one ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski1-3/+4
Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07Merge branch 's390-qeth-fixes-2021-01-07'Jakub Kicinski4-17/+30
Julian Wiedmann says: ==================== s390/qeth: fixes 2021-01-07 This brings two locking fixes for the device control path. Also one fix for a path where our .ndo_features_check() attempts to access a non-existent L2 header. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07s390/qeth: fix L2 header access in qeth_l3_osa_features_check()Julian Wiedmann1-1/+1
ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07s390/qeth: fix locking for discipline setup / removalJulian Wiedmann3-10/+7
Due to insufficient locking, qeth_core_set_online() and qeth_dev_layer2_store() can run in parallel, both attempting to load & setup the discipline (and stepping on each other toes along the way). A similar race can also occur between qeth_core_remove_device() and qeth_dev_layer2_store(). Access to .discipline is meant to be protected by the discipline_mutex, so add/expand the locking in qeth_core_remove_device() and qeth_core_set_online(). Adjust the locking in qeth_l*_remove_device() accordingly, as it's now handled by the callers in a consistent manner. Based on an initial patch by Ursula Braun. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07s390/qeth: fix deadlock during recoveryJulian Wiedmann4-18/+34
When qeth_dev_layer2_store() - holding the discipline_mutex - waits inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete, we can hit a deadlock if qeth_do_reset() concurrently calls qeth_set_online() and thus tries to aquire the discipline_mutex. Move the discipline_mutex locking outside of qeth_set_online() and qeth_set_offline(), and turn the discipline into a parameter so that callers understand the dependency. To fix the deadlock, we can now relax the locking: As already established, qeth_l*_remove_device() waits for qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk of having card->discipline ripped out while it's running, and thus doesn't need to take the discipline_mutex. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07Merge branch 'nexthop-various-fixes'Jakub Kicinski2-3/+5
Ido Schimmel says: ==================== nexthop: Various fixes This series contains various fixes for the nexthop code. The bugs were uncovered during the development of resilient nexthop groups. Patches #1-#2 fix the error path of nexthop_create_group(). I was not able to trigger these bugs with current code, but it is possible with the upcoming resilient nexthop groups code which adds a user controllable memory allocation further in the function. Patch #3 fixes wrong validation of netlink attributes. Patch #4 fixes wrong invocation of mausezahn in a selftest. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07selftests: fib_nexthops: Fix wrong mausezahn invocationIdo Schimmel1-1/+1
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07nexthop: Bounce NHA_GATEWAY in FDB nexthop groupsPetr Machata1-1/+1
The function nh_check_attr_group() is called to validate nexthop groups. The intention of that code seems to have been to bounce all attributes above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all these attributes except when NHA_FDB attribute is present--then it accepts them. NHA_FDB validation that takes place before, in rtm_to_nh_config(), already bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further back, NHA_GROUPS and NHA_MASTER are bounced unconditionally. But that still leaves NHA_GATEWAY as an attribute that would be accepted in FDB nexthop groups (with no meaning), so long as it keeps the address family as unspecified: # ip nexthop add id 1 fdb via 127.0.0.1 # ip nexthop add id 10 fdb via default group 1 The nexthop code is still relatively new and likely not used very broadly, and the FDB bits are newer still. Even though there is a reproducer out there, it relies on an improbable gateway arguments "via default", "via all" or "via any". Given all this, I believe it is OK to reformulate the condition to do the right thing and bounce NHA_GATEWAY. Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops") Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07nexthop: Unlink nexthop group entry in error pathIdo Schimmel1-1/+3
In case of error, remove the nexthop group entry from the list to which it was previously added. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07nexthop: Fix off-by-one error in error pathIdo Schimmel1-1/+1
A reference was not taken for the current nexthop entry, so do not try to put it in the error path. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07octeontx2-af: fix memory leak of lmac and lmac->nameColin Ian King1-3/+11
Currently the error return paths don't kfree lmac and lmac->name leading to some memory leaks. Fix this by adding two error return paths that kfree these objects Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-07riscv: Enable interrupts during syscalls with M-ModeDamien Le Moal1-0/+9
When running is M-Mode (no MMU config), MPIE does not get set. This results in all syscalls being executed with interrupts disabled as handle_exception never sets SR_IE as it always sees SR_PIE being cleared. Fix this by always force enabling interrupts in handle_syscall when CONFIG_RISCV_M_MODE is enabled. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.