aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-08-19mtd: mtdswap: fix integer overflowBrian Norris1-1/+1
Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: remove dead non-char logicBrian Norris1-8/+5
MTD used to allow compiling out character device support. This was dropped in the following commit, but some of the accompanying logic was never dropped: commit 660685d9d1b4730f0b5ca97fa95f272f99c63bce Author: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Date: Thu Mar 14 13:27:40 2013 +0200 mtd: merge mtdchar module with mtdcore The weird logic was flagged by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-08-19mtd: sm_ftl: initialize error codeBrian Norris1-1/+1
There is one theoretical case that could fall through to using an uninitialized value as the return code. Let's give it a value of 0. Untested. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: correct upper bounds check for mtd_*() APIsBrian Norris1-13/+13
When checking the upper boundary (i.e., whether an address is higher than the maximum size of the MTD), we should be doing an inclusive check (greater or equal). For instance, an address of 16MB (0x1000000) on a 16MB device is invalid. The strengthening of this bounds check is redundant for those which already have a address+length check and ensure that the length is non-zero, but let's just fix them all, for completeness. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: cfi_cmdset_0002: allow retry/timeout loop to exitBrian Norris1-0/+2
The variable 'retries' is never modified, so if the reset operation never is going to complete, we'll get stuck in an infinite loop. It looks like the intention was to decrement 'retries' on every loop. Untested. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: fix nand_lock/unlock() functionWhite Ding1-0/+18
Do nand reset before write protect check. If we want to check the WP# low or high through STATUS READ and check bit 7, we must reset the device, other operation (eg.erase/program a locked block) can also clear the bit 7 of status register. As we know the status register can be refreshed, if we do some operation to trigger it, for example if we do erase/program operation to one block that is locked, then READ STATUS, the bit 7 of READ STATUS will be 0 indicate the device in write protect, then if we do erase/program operation to another block that is unlocked, the bit 7 of READ STATUS will be 1 indicate the device is not write protect. Suppose we checked the bit 7 of READ STATUS is 0 then judge the WP# is low (write protect), but in this case the WP# maybe high if we do erase/program operation to a locked block, so we must reset the device if we want to check the WP# low or high through STATUS READ and check bit 7. Signed-off-by: White Ding <bpqw@micron.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: Fixed checkpatch seq_printf warningsSamarth Parikh2-15/+15
Fixed checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" This patch is created with reference to the ongoing lkml thread https://lkml.org/lkml/2014/7/15/646 where Andrew Morton wrote: " - puts is presumably faster - puts doesn't go rogue if you accidentally pass it a "%". - this patch would actually make compiled object files few bytes smaller. Perhaps because seq_printf() is a varargs function, forcing the caller to pass args on the stack instead of in registers. " Signed-off-by: Samarth Parikh <samarthp@ymail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: denali: avoid using a magic numberMasahiro Yamada1-1/+2
MAP10 command with '0x2000' data sets up a read-ahead/write access. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: remove redundant dev_err callWei Yongjun1-8/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: spi-nor: add support for Micron M25PX80Thomas Petazzoni1-0/+1
This commit adds the support in the spi-nor driver of the Micron M25PX80 flash, a 8 Mbit SPI flash from Micron. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: fix linux/mtd/nand.h kernel-doc warningRandy Dunlap1-0/+1
Fix kernel-doc warning in <linux/mtd/nand.h>: Warning(..//include/linux/mtd/nand.h:795): No description found for parameter 'ecc' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: add pmecc support for 512, 1k, 4k, 8k page sizeWu, Josh1-5/+11
PMECC can support 512, 1k, 2k, 4k, 8k page size. The driver currently only support 2k page size nand flash. So this patch add support to 512, 1k, 4k and 8k page size nand flash. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: increase chip_delayRaphaël Poggi1-1/+1
Some nand with 8k page size like Micron MT29F32G08ABAAAWP need more than 20us. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: use NULL instead of 0 for an addressMartin Kepplinger1-1/+1
Use NULL instead of 0 when returning an address. This fixes a sparse warning. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: ndfc: silence an array underflow static checker warningDan Carpenter1-1/+2
We check "cs" for array overflows but we don't check for underflows and it upsets the static checkers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-16Linux 3.17-rc1Linus Torvalds1-2/+2
2014-08-16Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds24-108/+608
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
2014-08-16Merge branch 'release' of ↵Linus Torvalds3-41/+119
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
2014-08-16Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
2014-08-16Merge branch 'rng-queue' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
2014-08-16Merge branch 'for-linus2' of ↵Linus Torvalds17-305/+541
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
2014-08-16Merge tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linuxLinus Torvalds2-30/+62
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
2014-08-16Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds1-56/+30
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
2014-08-16platform/x86: Enable build support for toshiba_hapsAzael Avalos2-0/+20
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16Documentation: Add file about toshiba_haps moduleAzael Avalos2-0/+78
This patch provides information about the Toshiba HDD Active Protection Sensor driver module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16platform/x86: Toshiba HDD Active Protection SensorAzael Avalos1-0/+265
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the U32UHans de Goede1-0/+14
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16alienware-wmi: make hdmi_mux enabled on case-by-case basisMario Limonciello1-2/+20
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16ideapad-laptop: Constify DMI table and other r/o variablesMathias Krause1-2/+2
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi.c: Rename x401u quirk to wapf4Hans de Goede1-13/+13
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16compal-laptop: correct invalid hwmon nameRoald Frederickx1-1/+1
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi listAzael Avalos1-0/+7
The Toshiba Qosmio X75-A series models also come with the new keymap layout. This patch adds this model to the alt_keymap_dmi list, along with an extra key found on these models. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16toshiba_acpi: Add extra check to backlight codeAzael Avalos1-4/+17
Some Toshiba models (most notably Qosmios) come with an incomplete backlight method where the AML code doesn't check for write or read commands and always returns HCI_SUCCESS and the actual brightness (and in some cases the max brightness), thus allowing the backlight interface to be registered without write support. This patch changes the set_lcd_brightness function, checking the returned values for values greater than zero to avoid registering a broken backlight interface. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16Fix log message about future removal of interfaceMartin Kepplinger1-3/+3
If this is going away, it won't be in 2012. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16ideapad-laptop: Disable touchpad interface on Yoga modelsHans de Goede1-0/+27
Yoga models don't offer touchpad ctrl through the ideapad interface, causing ideapad_sync_touchpad_state to send wrong touchpad enable/disable events. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the X550CCHans de Goede1-0/+9
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the X550CC needs wapf=4 too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16intel_ips: Make ips_mcp_limits variables staticMathias Krause1-3/+3
These variables don't need to be visible outside of this compilation unit, make them static. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdataMathias Krause1-2/+2
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata, as snd_ctl_new1() will copy the relevant parts, so there is no need to keep the master copies around after initialization. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconstMathias Krause1-5/+5
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 1.5 kB. In turn, the callback functions can be marked with __init, too. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16hp-wmi: Add missing __init annotations to initialization codeMathias Krause1-3/+3
These functions are only called from other initialization routines, so can be marked __init, too. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16hp_accel: Constify ACPI and DMI tablesMathias Krause1-2/+2
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI tables. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16fujitsu-tablet: Mark DMI callbacks as __init codeMathias Krause1-3/+3
The DMI table is already marked as __initconst, so can be the callback functions as they're only used in that context. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Robert Gerlach <khnz@gmx.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16dell-laptop: Mark dell_quirks[] DMI table as __initconstMathias Krause1-3/+3
The dell_quirks[] DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 5.7 kB. In turn, the callback function can be marked with __init, too. Also the touchpad_led_init() function can be marked __init as it's only referenced from dell_init() -- an __init function. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16eeepc-wmi: Constify asus_quirks[] DMI tableMathias Krause1-1/+1
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16acer-wmi: Mark init data and code as suchMathias Krause1-20/+21
Quite a lot of code and data of acer-wmi.c is only ever used during initialization. Mark those accordingly -- and constify, where appropriate -- so the memory can be released afterwards. All in all those changes move ~10 kB of code and data to the .init sections, marking them for release after initialization has finished. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Constify asus_quirks[] DMI tableMathias Krause1-1/+1
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16alienware-wmi: Mark DMI table as __initconstMathias Krause1-2/+2
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released appropriately. In turn, the callback function can be marked with __init, too. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16acer-wmi: Hide acer_{suspend,resume} for !CONFIG_PM_SLEEPMathias Krause1-0/+5
Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP to get rid of the following warnings: ../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function] ../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function] Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16acer-wmi: Mark acer_wmi_keymap[] as __initconstMathias Krause1-1/+1
sparse_keymap_setup() will make a copy of the keymap, so we can release the master copy after initialization. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16MAINTAINERS: Update git URL for x86 platform driversMathias Krause1-1/+1
The repo on kernel.org is no longer available but has a replacement at cavan.codon.org.uk. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Powered by cgit, Gruvboxed by Blaster4385.