| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge series from AngeloGioacchino Del Regno <[email protected]>:
Changes in v5:
- Cleaned up MT8186 soundcard migration commit which erroneously
had leftovers from development
- Changed the mtk_pcm_constraints_data structure to hold pointers
to snd_pcm_hw_constraint_list, as to really reuse the const data
- Tested again on all of the listed MTK platforms.
Changes in v4:
- Rebased over next-20240409
- Dropped the first 4 patches from v3 as were already picked by Mark
- Fixed W=1 build issue
Changes in v3:
- Added audio-routing names in enum in all yaml files
- Added mention of disallowing old and new properties together in
commit message of bindings patches
- Fixed validation errors with sound-card-common.yaml inclusion
due to missing model property in examples
- Removed `else` enforcing headset-codec/speaker-codecs requirement
if xxx-dai-link not present to avoid future commit noise as the
deprecated statement will disallow deprecated properties as required
Changes in v2:
- Bindings: Changed link-name/codec/clk-provider to remove `items`
and leave just the enum
- Moved .*-dai-link pattern additionalProperties after `type: object`
- Added ref to sound-card-common.yaml
- Fixed dai-link-xxx -> xxx-dai-link typo in example comment
This series performs a cleanup of most of the MediaTek AFE drivers and
soundcard machine drivers, reducing code duplication and setting a base
to be consistent with their devicetree bindings, as many of those are
using different properties and nodes for no good reason.
Summarizing:
- Commonizes functions and ops where possible
- Adds a common probe mechanism, increasing maintainability of
soundcard drivers for older MediaTek SoCs
- Migrates all drivers to support the new bindings
- Obviously retains compatibility with old device trees
- Reduces machine-specific parameters hardcoding in drivers
- Can now set machine-specific params in device tree
- Uses the `audio-routing` and `dai-link` nodes like some
other non-MediaTek SoC sound drivers
- Imposes consistency between MediaTek ASoC machine soundcard
drivers bindings
- Reduces code size and greatly reduces the amount of code that
will be required for newer drivers (retaining compatibility with
the old bindings was costly in terms of code size, otherwise
this series would've removed ~1000 more lines, or something
along that line).
This series was (manually) tested on MT8173, MT8192, MT8195 and MT8186
Chromebooks.
AngeloGioacchino Del Regno (18):
ASoC: mediatek: Add common machine soundcard driver probe mechanism
ASoC: mediatek: common: Constify struct mtk_sof_priv
ASoC: mediatek: mt8188: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: mt8195: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: mt8192: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: mt8186: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: Add common snd_soc_ops .startup() callback
ASoC: mediatek: mt8195: Migrate to the common mtk_soundcard_startup
ASoC: mediatek: mt8192: Migrate to the common mtk_soundcard_startup
ASoC: mediatek: mt8186-rt1019: Migrate to the common
mtk_soundcard_startup
ASoC: mediatek: Add common mtk_afe_component_probe callback
ASoC: mediatek: Use common mtk_afe_pcm_platform with common probe cb
ASoC: mediatek: mt8186: Unify mt8186-mt6366 machine drivers
ASoC: dt-bindings: mt8195: Document audio-routing and dai-link subnode
ASoC: dt-bindings: mt8192: Document audio-routing and dai-link subnode
ASoC: dt-bindings: mt8186: Document audio-routing and dai-link subnode
arm64: dts: mediatek: mt8195-cherry: Specify sound DAI links and
routing
arm64: dts: mediatek: mt8186-corsola: Specify sound DAI links and
routing
.../sound/mt8186-mt6366-da7219-max98357.yaml | 131 +-
.../sound/mt8186-mt6366-rt1019-rt5682s.yaml | 120 +-
.../sound/mt8192-mt6359-rt1015-rt5682.yaml | 139 +-
.../bindings/sound/mt8195-mt6359.yaml | 134 ++
.../boot/dts/mediatek/mt8186-corsola.dtsi | 42 +-
.../boot/dts/mediatek/mt8195-cherry.dtsi | 45 +
sound/soc/mediatek/Kconfig | 24 +-
.../mediatek/common/mtk-afe-platform-driver.c | 18 +
.../soc/mediatek/common/mtk-dsp-sof-common.c | 15 +-
.../soc/mediatek/common/mtk-dsp-sof-common.h | 1 -
sound/soc/mediatek/common/mtk-soc-card.h | 7 +-
.../mediatek/common/mtk-soundcard-driver.c | 199 +++
.../mediatek/common/mtk-soundcard-driver.h | 42 +
sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 14 +-
sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 14 +-
sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 14 +-
sound/soc/mediatek/mt8186/Makefile | 3 +-
.../mt8186/mt8186-mt6366-da7219-max98357.c | 1189 -----------------
...t6366-rt1019-rt5682s.c => mt8186-mt6366.c} | 578 ++++----
sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 21 +-
sound/soc/mediatek/mt8188/mt8188-mt6359.c | 203 +--
sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 25 +-
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 301 ++---
sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 21 +-
sound/soc/mediatek/mt8195/mt8195-mt6359.c | 487 +++----
25 files changed, 1597 insertions(+), 2190 deletions(-)
delete mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
rename sound/soc/mediatek/mt8186/{mt8186-mt6366-rt1019-rt5682s.c => mt8186-mt6366.c} (72%)
--
2.44.0
|
|
The string SND_SOC_DAPM_DIR_OUT is printed in the snd_soc_dapm_path trace
event instead of its value:
(((REC->path_dir) == SND_SOC_DAPM_DIR_OUT) ? "->" : "<-")
User space cannot parse this, as it has no idea what SND_SOC_DAPM_DIR_OUT
is. Use TRACE_DEFINE_ENUM() to convert it to its value:
(((REC->path_dir) == 1) ? "->" : "<-")
So that user space tools, such as perf and trace-cmd, can parse it
correctly.
Reported-by: Luca Ceresoli <[email protected]>
Fixes: 6e588a0d839b5 ("ASoC: dapm: Consolidate path trace events")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Document the dai-link subnodes and the audio-routing property, allowing
to describe machine specific audio hardware and links in device tree.
While at it, also deprecate the old properties which were previously
used with the driver's partially hardcoded configuration.
Also, since describing machine specific audio hardware and links replaces
the now deprecated old logic doing the same in a driver hardcoded fashion,
it is not allowed to have both the old and new properties together.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Document the dai-link subnodes and the audio-routing property, allowing
to describe machine specific audio hardware and links in device tree.
While at it, also deprecate the old properties which were previously
used with the driver's partially hardcoded configuration.
Also, since describing machine specific audio hardware and links replaces
the now deprecated old logic doing the same in a driver hardcoded fashion,
it is not allowed to have both the old and new properties together.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Document the dai-link subnodes and the audio-routing property, allowing
to describe machine specific audio hardware and links in device tree.
While at it, also deprecate the old properties which were previously
used with driver hardcoded configuration.
Also, since describing machine specific audio hardware and links replaces
the now deprecated old logic doing the same in a driver hardcoded fashion,
it is not allowed to have both the old and new properties together.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Copy the few differences from mt8186-mt6166-da7219-max98357 in the
mt8186-mt6366-rt1019-rt5682s driver to greatly reduce code duplication;
since now the driver is meant to support MT8186 with the MT6366 PMIC
codec and various combinations of I2S codecs, rename the driver to
mt8186-mt6366 for consistency with MT8195 and MT8188, and rename
the configuration option to SND_SOC_MT8186_MT6366.
Since right now there is no machine using the da7219-max98357 yet, the
snd_soc_dapm_route array was omitted as it's now possible to specify
the audio routing in device trees instead.
While at it, also add the missing sentinel comment to the last entry
of the of_device_id array.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since the mtk-afe-platform-driver generic mtk_afe_pcm_platform now has
a common .probe() callback, there is no reason to keep duplicating this
function over and over in the SoC specific AFE-PCM drivers: switch over
to register with the common bits instead.
Note that MT8186 was left out of this because it is registering some
extra sinegen controls in the AFE-PCM probe callback and needs extra
cleanups to be able to use the common bits.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Multiple MediaTek AFE PCM component drivers are using their own .probe()
callback, but most of those are simply duplicated functions as they are
doing exactly the same thing over and over.
Add a common probe callback for this component to reduce duplication.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
MediaTek platforms are typically setting PCM rate and channels
constraints for playback, capture and HDMI/DisplayPort playback:
commonize the startup callback by adding the PCM constraints data
to the mtk_platform_card_data structure and by reusing the common
mtk_soundcard_startup() function for all of them by getting back
the parameters from the aforementioned struct.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Apart from a dai_link_list variable, the mtk_sof_priv currently holds
data that never gets modified during runtime.
Constify the mtk_sof_priv structure and move the SOF dai_link_list as
sof_dai_link_list in struct mtk_soc_card_data, which is a structure
that already holds the card's machine specific, runtime modified data.
This allows to safely pass the mtk_sof_priv structure as platform data
for the commonized card probe mechanism.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a common machine soundcard driver probe function that supports both
DSP and AFE-direct usecases and also provides a hook for legacy machine
soundcard driver probe mechanisms.
Note that the hook is there because, even for legacy probe, a lot of the
actual code can still be commonized, hence still reducing duplication
for the legacy devicetree retrocompatibility cases.
This common probe function deprecates all of the inconsistent previous
probe mechanisms and aims to settle all of the MediaTek card drivers on
consistent and common devicetree properties describing wanted DAIs,
device specific DAI configuration and DAI links to codecs found on
each device/board.
Reviewed-by: Alexandre Mergnat <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The wm8904 codec is used on an i.MX95 Toradex board.
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
wm8904 codec is used on i.MX95 Toradex board
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add vendor clear control register in readable register's
callback function. This prevents an access failure reported
in Intel CI tests.
Signed-off-by: Jack Yu <[email protected]>
Closes: https://github.com/thesofproject/linux/issues/4860
Tested-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The I2S cores used in the H3 onwards support 32-bit sample rates.
Support these by adding a per-variant PCM format list.
Signed-off-by: John Watts <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Neither core nor the driver modifes 'struct regulator_ops', so it can be
const for code safety.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add support microphone from Acer Aspire A315-24P and for some other similar devices with such vendor
Signed-off-by: "end.to.start" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Pierre-Louis Bossart <[email protected]>:
More cleanups from Brent, notably the removal of the redundant
cml_rt1011_rt5682 machine driver, fixes for SoundWire platforms and
changes to sof_rt5682 to allow for 96+ sampling rates.
For the rest of this kernel cycle, we are still working on SoundWire
updates for MeteorLake (usual missing ACPI signature required for
topology selection and jack detection information). We'll provide
those patches as soon as they are reviewed/validated.
|
|
It is missing generic compatible for R-Car Gen4
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add document for R-Car V4M (R8A779H0).
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
There are two issues here:
1) The get_device() needs a matching put_device() on error paths.
2) The "if (!ret)" was supposed to be "if (ret)".
I re-arranged the code a bit to do the allocation before the
get_device().
Fixes: ef7784e41db7 ("ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Document fsl,imx25-pdk-sgtl5000 to fix the following dt-schema warning:
imx25-pdk.dtb: sound: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx25-pdk-sgtl5000', 'fsl,imx-audio-sgtl5000'] is too long
Fixes: 4189b54220e5 ("ASoC: dt-bindings: fsl-asoc-card: convert to YAML")
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
When 96KHz sample rate is used, and MCLK is 24.576MHz, we will need
pll_in = 24576000 and pll_out = 49152000 which is not supported by
RT5682S_PLL2. Use RT5682S_PLL1 in this case.
We don't test sample rate because RT5682S_PLL2 doesn't support 24.576MHz
input and in the MCLK = 24.576MHz, sample rate = 48KHz case, i.e.
pll_in == pll_out, PLL will not be used at all.
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Delete this driver and use sof_rt5682 machine driver instead.
Reviewed-by: Chao Song <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
For cml boards, ALC1011 speaker amplifier is supported by machine
driver cml_rt1011_rt5682. Use same driver name for backward
compatibility with existing devices on market.
Reviewed-by: Chao Song <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add support for boards with four ALC1011 amplifiers. Configuration is
copied from cml_rt1011_rt5682 machine driver for backward
compatibility with existing cml devices.
Reviewed-by: Chao Song <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add the board config mtl_da7219_def to da7219 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other rpl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other adl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This patch removes a confusion between speakers and amplifiers.
The existing code keeps track of the number of amplifiers and reports
it in the 'cfg-amp' component string.
The number of speakers is defined with quirks, but those quirks are
not consistently added: in the MeteorLake case, none of the supported
platforms used such a quirk, and UCM does not use the values reported
anyways. The notion of 'FOUR_SPEAKERS' is also obsolete now with some
platforms having more than four speakers.
Let's just remove all this and only report the number of amplifiers.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The JD1 jack detection doesn't seem to work, use JD2.
Also use the 4 speaker configuration.
Link: https://github.com/thesofproject/linux/issues/4900
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The default JD1 does not seem to work, use JD2 instead.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This platform has an RT711-sdca on link0 and RT1316 on link3
Closes: https://github.com/thesofproject/linux/issues/4880
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
multi-function codecs
We do need "info->amp_num++;" for the speaker dai.
Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Convert the imx-audio-spdif binding to YAML.
When testing dtbs_check, found below compatible strings
are not listed in document:
fsl,imx-sabreauto-spdif
fsl,imx6sx-sdb-spdif
So add them in yaml file to pass the test.
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Currently, all ASoC systems are set to use VPMON for DSP1RX5_SRC,
however, this is required only for internal boost systems.
External boost systems require VBSTMON instead of VPMON to be the
input to DSP1RX5_SRC.
Shared Boost Active acts like Internal boost (requires VPMON).
Shared Boost Passive acts like External boost (requires VBSTMON)
All systems require DSP1RX6_SRC to be set to VBSTMON.
Signed-off-by: Stefan Binding <[email protected]>
Reviewed-by: Richard Fitzgerald <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Variable ret is being assigned a value that is never read in a couple
of places. The variable is being re-assigned later on. The assignments
are redundant and can be removed.
Cleans up clang scan build warning:
sound/soc/codecs/tas2780.c:84:2: warning: Value stored to 'ret' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Explicitly #include array_size.h for the source files that use
ARRAY_SIZE().
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Explicitly #include array_size.h for the ARRAY_SIZE() macro.
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Bastien Curutchet <[email protected]>:
This series aims to add some features to McBSP driver.
Convert bindings from .txt to .yaml.
Add possibility to use an external clock as sample rate generator's
input.
Add handling of new formats (TDM, S24_LE, BP_FC).
Enable the detection of unexpected frame pulses.
Set the clock free-running mode according to SND_SOC_DAIFMT_[GATED/CONT]
configuration in DAI format.
Add ti,T1-framing[tx/rx] properties in DT. They allow to set the data
delay to two bit-clock periods.
This has been tested on a platform designed off of the DAVINCI/OMAP-L138
connected to 3 daisy-chained AD7767. An external clock drives the
sample rate generator through the CLKS pin.
The hardware I have only allowed me to test acquisition side of McBSP.
It is connected to a 6 channels TDM and acts as Bit clock provider and
Frame clock consumer.
|
|
Merge series from Peter Ujfalusi <[email protected]>:
The beginning of the first SRAM window contains various fw registers and
additional information which can be very beneficial to read to gather
information on the current states to debug issues.
|