| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add missing DWMAC IP version in snps,dwmac.yaml which found by below
command, as NXP i.MX8 families support SNPS DWMAC 5.10a IP.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
Documentation/devicetree/bindings/net/nxp,dwmac-imx.example.dt.yaml:
ethernet@30bf0000: compatible: None of ['nxp,imx8mp-dwmac-eqos', 'snps,dwmac-5.10a'] are valid under the given schema
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Building on ARCH=arc causes a "redefined" warning, so rename this
driver's CACHE_LINE_MASK to avoid the warning.
../drivers/net/ethernet/hisilicon/hip04_eth.c:134: warning: "CACHE_LINE_MASK" redefined
134 | #define CACHE_LINE_MASK 0x3F
In file included from ../include/linux/cache.h:6,
from ../include/linux/printk.h:9,
from ../include/linux/kernel.h:19,
from ../include/linux/list.h:9,
from ../include/linux/module.h:12,
from ../drivers/net/ethernet/hisilicon/hip04_eth.c:7:
../arch/arc/include/asm/cache.h:17: note: this is the location of the previous definition
17 | #define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1))
Fixes: d413779cdd93 ("net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Jiangfeng Xiao <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
Most of the fixes in this series have to do with error recovery. They
include error path handling when the error recovery has to abort, and
the rediscovery of capabilities (PTP and RoCE) after firmware reset
that may result in capability changes.
Two other fixes are to reject invalid ETS settings and to validate
VLAN protocol in the RX path.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The current PTP initialization logic does not account for firmware
reset that may cause PTP capability to change. The valid pointer
bp->ptp_cfg is used to indicate that the device is capable of PTP
and that it has been initialized. So we must clean up bp->ptp_cfg
and free it if the firmware after reset does not support PTP.
Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support")
Cc: Richard Cochran <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The device needs to be in ifup state for PTP to function, so move
bnxt_ptp_init() to bnxt_open(). This means that the PHC will be
registered during bnxt_open().
This also makes firmware reset work correctly. PTP configurations
may change after firmware upgrade or downgrade. bnxt_open() will
be called after firmware reset, so it will work properly.
bnxt_ptp_start() is now incorporated into bnxt_ptp_init(). We now
also need to call bnxt_ptp_clear() in bnxt_close().
Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support")
Cc: Richard Cochran <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
bnxt_half_open_nic() is called during during ethtool self test and is
protected by rtnl_lock. Firmware reset can be happening at the same
time. Only critical portions of the entire firmware reset sequence
are protected by the rtnl_lock. It is possible that bnxt_half_open_nic()
can be called when the firmware reset sequence is aborting. In that
case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set
and abort if it is. The ethtool self test will fail but the NIC will be
brought to a consistent IF_DOWN state.
Without this patch, if bnxt_half_open_nic() were to continue in this
error state, it may crash like this:
bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Process ethtool (pid: 333327, stack limit = 0x0000000046476577)
Call trace:
bnxt_alloc_mem+0x444/0xef0 [bnxt_en]
bnxt_half_open_nic+0x24/0xb8 [bnxt_en]
bnxt_self_test+0x2dc/0x390 [bnxt_en]
ethtool_self_test+0xe0/0x1f8
dev_ethtool+0x1744/0x22d0
dev_ioctl+0x190/0x3e0
sock_ioctl+0x238/0x480
do_vfs_ioctl+0xc4/0x758
ksys_ioctl+0x84/0xb8
__arm64_sys_ioctl+0x28/0x38
el0_svc_handler+0xb0/0x180
el0_svc+0x8/0xc
Fixes: a1301f08c5ac ("bnxt_en: Check abort error state in bnxt_open_nic().")
Signed-off-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Only pass supported VLAN protocol IDs for stripped VLAN tags to the
stack. The stack will hit WARN() if the protocol ID is unsupported.
Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100.
Only the 1st two protocols are supported by the kernel.
Fixes: a196e96bb68f ("bnxt_en: clean up VLAN feature bit handling")
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When bnxt_open() fails in the firmware reset path, the driver needs to
gracefully abort, but it is executing code that should be invoked only
in the success path. Define a function to abort FW reset and
consolidate all error paths to call this new function.
Fixes: dab62e7c2de7 ("bnxt_en: Implement faster recovery for firmware fatal error.")
Signed-off-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all
VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after
we acquire the rtnl_lock. If the flag is set, we need to abort.
Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The capabilities can change after firmware upgrade/downgrade, so we
should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe()
is called.
Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.")
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ETS proportions are presented to HWRM_QUEUE_COS2BW_CFG as minimum
bandwidth constraints. Thus, zero is a legal value for a given TC.
However, if all the other TCs sum up to 100%, then at least one
hardware queue will starve, resulting in guaranteed TX timeouts.
Reject such nonsensical configurations.
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If device is already disabled in reset path and PCI io error is
detected before the device could be enabled, driver could
call pci_disable_device() for already disabled device. Fix this
problem by calling pci_disable_device() only if the device is already
enabled.
Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.")
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently it's possible to iterate over the dangling pointer in case the device
suddenly disappears. This may happen becase callers put it at the end of a loop.
Instead, let's move that call inside acpi_dev_get_next_match_dev().
Fixes: 803abec64ef9 ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver")
Fixes: bf263f64e804 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro")
Fixes: edbd1bc4951e ("efi/dev-path-parser: Switch to use for_each_acpi_dev_match()")
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
During a rework of initramfs code the INITRAMFS_COMPRESSION config
option was removed in commit 65e00e04e5ae. A leftover as a dependency
broke the config option ACPI_TABLE_OVERRIDE_VIA_ BUILTIN_INITRD that
is used to enable the overriding of ACPI tables from built-in initrd.
Fixing the dependency.
Fixes: 65e00e04e5ae ("initramfs: refactor the initramfs build rules")
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This reverts commit 9e31c1fe45d555a948ff66f1f0e3fe1f83ca63f7. Ever
since that commit, we've been having issues where a hang in one client
can propagate to another. In particular, a hang in an app can propagate
to the X server which causes the whole desktop to lock up.
Error propagation along fences sound like a good idea, but as your bug
shows, surprising consequences, since propagating errors across security
boundaries is not a good thing.
What we do have is track the hangs on the ctx, and report information to
userspace using RESET_STATS. That's how arb_robustness works. Also, if my
understanding is still correct, the EIO from execbuf is when your context
is banned (because not recoverable or too many hangs). And in all these
cases it's up to userspace to figure out what is all impacted and should
be reported to the application, that's not on the kernel to guess and
automatically propagate.
What's more, we're also building more features on top of ctx error
reporting with RESET_STATS ioctl: Encrypted buffers use the same, and the
userspace fence wait also relies on that mechanism. So it is the path
going forward for reporting gpu hangs and resets to userspace.
So all together that's why I think we should just bury this idea again as
not quite the direction we want to go to, hence why I think the revert is
the right option here.
For backporters: Please note that you _must_ have a backport of
https://lore.kernel.org/dri-devel/[email protected]/
for otherwise backporting just this patch opens up a security bug.
v2: Augment commit message. Also restore Jason's sob that I
accidentally lost.
v3: Add a note for backporters
Signed-off-by: Jason Ekstrand <[email protected]>
Reported-by: Marcin Slusarz <[email protected]>
Cc: <[email protected]> # v5.6+
Cc: Jason Ekstrand <[email protected]>
Cc: Marcin Slusarz <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3080
Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences")
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Jon Bloomfield <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 93a2711cddd5760e2f0f901817d71c93183c3b87)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
This reverts 686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser"). The
justification for this commit in the git history was a vague comment
about getting it out from under the struct_mutex. While this may
improve perf for some workloads on Gen7 platforms where we rely on the
command parser for features such as indirect rendering, no numbers were
provided to prove such an improvement. It claims to closed two
gitlab/bugzilla issues but with no explanation whatsoever as to why or
what bug it's fixing.
Meanwhile, by moving command parsing off to an async callback, it leaves
us with a problem of what to do on error. When things were synchronous,
EXECBUFFER2 would fail with an error code if parsing failed. When
moving it to async, we needed another way to handle that error and the
solution employed was to set an error on the dma_fence and then trust
that said error gets propagated to the client eventually. Moving back
to synchronous will help us untangle the fence error propagation mess.
This also reverts most of 0edbb9ba1bfe ("drm/i915: Move cmd parser
pinning to execbuffer") which is a refactor of some of our allocation
paths for asynchronous parsing. Now that everything is synchronous, we
don't need it.
v2 (Daniel Vetter):
- Add stabel Cc and Fixes tag
Signed-off-by: Jason Ekstrand <[email protected]>
Cc: <[email protected]> # v5.6+
Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences")
Cc: Maarten Lankhorst <[email protected]>
Reviewed-by: Jon Bloomfield <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 93b713304188844b8514074dc13ffd56d12235d3)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
drm-intel-fixes
gvt-fixes-2021-07-15
- Fix shadow ppgtt invalidation with proper D3 state tracking (Colin)
Signed-off-by: Rodrigo Vivi <[email protected]>
From: Zhenyu Wang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The original implementation of RPM handling in probe() was mostly
correct, except it failed to call pm_runtime_get_*() to activate the
hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct
initialisation of runtime PM"), breaks the implementation further,
to the point where the system using this hard IP on ZynqMP hangs on
boot, because it accesses hardware which is gated off.
Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime
PM") and instead add missing pm_runtime_get_noresume() and move the
RPM disabling all the way to the end of probe(). That makes ZynqMP
not hang on boot yet again.
Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Charles Keepax <[email protected]>
Cc: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
During probe the parent_clk_id is set to -1 which should not be used to
array index within hsdiv_rates[].
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In case of an error within j721e_audio_startup() the domain->active must
be decremented to avoid unbalanced counter.
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The defconfigs switched Mac from the deprecated CONFIG_BLK_DEV_PLATFORM
to CONFIG_PATA_PLATFORM. However, the latter depends on
CONFIG_HAVE_PATA_PLATFORM, which thus must be selected first.
Fixes: b90257bfddbd01f3 ("m68k: use libata instead of the legacy ide driver")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The vmbus module uses a rotational algorithm to assign target CPUs to
a device's channels. Depending on the timing of different device's channel
offers, different channels of a device may be assigned to the same CPU.
For example on a VM with 2 CPUs, if NIC A and B's channels are offered
in the following order, NIC A will have both channels on CPU0, and
NIC B will have both channels on CPU1 -- see below. This kind of
assignment causes RSS load that is spreading across different channels
to end up on the same CPU.
Timing of channel offers:
NIC A channel 0
NIC B channel 0
NIC A channel 1
NIC B channel 1
VMBUS ID 14: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter
Device_ID = {cab064cd-1f31-47d5-a8b4-9d57e320cccd}
Sysfs path: /sys/bus/vmbus/devices/cab064cd-1f31-47d5-a8b4-9d57e320cccd
Rel_ID=14, target_cpu=0
Rel_ID=17, target_cpu=0
VMBUS ID 16: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter
Device_ID = {244225ca-743e-4020-a17d-d7baa13d6cea}
Sysfs path: /sys/bus/vmbus/devices/244225ca-743e-4020-a17d-d7baa13d6cea
Rel_ID=16, target_cpu=1
Rel_ID=18, target_cpu=1
Update the vmbus CPU assignment algorithm to avoid duplicate CPU
assignments within a device.
The new algorithm iterates num_online_cpus + 1 times.
The existing rotational algorithm to find "next NUMA & CPU" is still here.
But if the resulting CPU is already used by the same device, it will try
the next CPU.
In the last iteration, it assigns the channel to the next available CPU
like the existing algorithm. This is not normally expected, because
during device probe, we limit the number of channels of a device to
be <= number of online CPUs.
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Tested-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
This is a Lenovo ThinkStation machine which uses the codec alc623.
There are 2 issues on this machine, the 1st one is the pop noise in
the lineout, the 2nd one is there are 2 Front Mics and pulseaudio
can't handle them, After applying the fixup of
ALC623_FIXUP_LENOVO_THINKSTATION_P340 to this machine, the 2 issues
are fixed.
Cc: <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
TTMs buffer objects are based on GEM objects for quite a while
and rely on initializing those fields before initializing the TTM BO.
Nouveau now doesn't init the GEM object for internally allocated BOs,
so make sure that we at least initialize some necessary fields.
Signed-off-by: Christian König <[email protected]>
Tested-by: Mikko Perttunen <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st
byte instead of 10th byte.
Link: https://lore.kernel.org/r/[email protected]
Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME")
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
are offlined.
- Fix 'perf test' problems related to the recently added hybrid
(BIG/little) code.
- Split ARM's coresight (hw tracing) decode by aux records to avoid
fatal decoding errors.
- Fix add event failure in 'perf probe' when running 32-bit perf in a
64-bit kernel.
- Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.
- Fix memory and refcount leaks detected by ASAn when running 'perf
test', should be clean of warnings now.
- Remove broken definition of __LITTLE_ENDIAN from tools'
linux/kconfig.h, which was breaking the build in some systems.
- Cast PTHREAD_STACK_MIN to int as it may turn into 'long
sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
systems.
- Fix libperf build error with LIBPFM4=1.
- Sync UAPI files changed by the memfd_secret new syscall.
* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
perf data: Close all files in close_dir()
perf probe-file: Delete namelist in del_events() on the error path
perf test bpf: Free obj_buf
perf trace: Free strings in trace__parse_events_option()
perf trace: Free syscall tp fields in evsel->priv
perf trace: Free syscall->arg_fmt
perf trace: Free malloc'd trace fields on exit
perf lzma: Close lzma stream on exit
perf script: Fix memory 'threads' and 'cpus' leaks on exit
perf script: Release zstd data
perf session: Cleanup trace_event
perf inject: Close inject.output on exit
perf report: Free generated help strings for sort option
perf env: Fix memory leak of cpu_pmu_caps
perf test maps__merge_in: Fix memory leak of maps
perf dso: Fix memory leak in dso__new_map()
perf test event_update: Fix memory leak of unit
perf test event_update: Fix memory leak of evlist
...
|
|
Pull xfs fixes from Darrick Wong:
"A few fixes for issues in the new online shrink code, additional
corrections for my recent bug-hunt w.r.t. extent size hints on
realtime, and improved input checking of the GROWFSRT ioctl.
IOW, the usual 'I somehow got bored during the merge window and
resumed auditing the farther reaches of xfs':
- Fix shrink eligibility checking when sparse inode clusters enabled
- Reset '..' directory entries when unlinking directories to prevent
verifier errors if fs is shrinked later
- Don't report unusable extent size hints to FSGETXATTR
- Don't warn when extent size hints are unusable because the sysadmin
configured them that way
- Fix insufficient parameter validation in GROWFSRT ioctl
- Fix integer overflow when adding rt volumes to filesystem"
* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: detect misaligned rtinherit directory extent size hints
xfs: fix an integer overflow error in xfs_growfs_rt
xfs: improve FSGROWFSRT precondition checking
xfs: don't expose misaligned extszinherit hints to userspace
xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
xfs: reset child dir '..' entry when unlinking child
xfs: check for sparse inode clusters that cross new EOAG when shrinking
|
|
Pull iomap fixes from Darrick Wong:
"A handful of bugfixes for the iomap code.
There's nothing especially exciting here, just fixes for UBSAN (not
KASAN as I erroneously wrote in the tag message) warnings about
undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
reshuffling of per-page block state info to fix some problems with
gfs2.
- Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE
- Fix assertion errors when using inlinedata files on gfs2"
* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
iomap: Don't create iomap_page objects for inline files
iomap: Permit pages without an iop to enter writeback
iomap: remove the length variable in iomap_seek_hole
iomap: remove the length variable in iomap_seek_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: Fix intiramfs script name
Kbuild: lto: fix module versionings mismatch in GNU make 3.X
kbuild: do not suppress Kconfig prompts for silent build
scripts/setlocalversion: fix a bug when LOCALVERSION is empty
|
|
Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use
sock timer API. It replaces mod_timer() by sk_reset_timer(), and
del_timer() by sk_stop_timer().
Function sk_reset_timer() will increase the refcount of sock if it is
called on an inactive timer, hence, in case the timer expires, we need to
decrease the refcount ourselves in the handler, otherwise, the sock
refcount will be unbalanced and the sock will never be freed.
Signed-off-by: Nguyen Dinh Phi <[email protected]>
Reported-by: [email protected]
Fixes: 63346650c1a9 ("netrom: switch to sock timer API")
Signed-off-by: David S. Miller <[email protected]>
|
|
After commit ca84bd058dae ("sctp: copy the optval from user space in
sctp_setsockopt"), it does memory allocation in sctp_setsockopt with
the optlen, and it would fail the allocation and return error if the
optlen from user space is a huge value.
This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and
SCTP_AUTH_KEY, as when processing these sockopts before, optlen would
be trimmed to a biggest value it needs when optlen is a huge value,
instead of failing the allocation and returning error.
This patch is to fix the allocation failure when it's a huge optlen from
user space by trimming it to the biggest size sctp sockopt may need when
necessary, and this biggest size is from sctp_setsockopt_reset_streams()
for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT
and SCTP_AUTH_KEY.
Fixes: ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt")
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Syzbot reported memory leak in tcindex_set_parms(). The problem was in
non-freed perfect hash in tcindex_partial_destroy_work().
In tcindex_set_parms() new tcindex_data is allocated and some fields from
old one are copied to new one, but not the perfect hash. Since
tcindex_partial_destroy_work() is the destroy function for old
tcindex_data, we need to free perfect hash to avoid memory leak.
Reported-and-tested-by: [email protected]
Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.
---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
<IRQ>
queue_userspace_packet+0x2af/0x5e0 [openvswitch]
ovs_dp_upcall+0x3d/0x60 [openvswitch]
ovs_dp_process_packet+0x125/0x150 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
netdev_port_receive+0x87/0x130 [openvswitch]
netdev_frame_hook+0x4b/0x60 [openvswitch]
__netif_receive_skb_core+0x2b4/0xc90
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x18/0x60
process_backlog+0xa9/0x160
net_rx_action+0x142/0x390
__do_softirq+0xe1/0x2d6
irq_exit+0xae/0xb0
do_IRQ+0x5a/0xf0
common_interrupt+0xf/0xf
Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
int i, j = 0;
int plen = 0; /* length of skb->head fragment */
int ret;
struct page *page;
unsigned int offset;
BUG_ON(!from->head_frag && !hlen);
Signed-off-by: Pravin B Shelar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Documentation was not changed when renaming the script in commit
80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.
Basically does:
$ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)
Fixes: 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows
WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.
But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.
The problematic code is
+ $(foreach n, $(filter-out FORCE,$^), \
+ $(if $(wildcard $(n).symversions), \
+ ; cat $(n).symversions >> [email protected]))
For example:
rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \
llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \
fs/notify/notification.o fs/notify/group.o ...
`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.
-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions
The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.
Thus fix this by use `test` shell command to check the file
existence in runtime.
Rebase from both:
1. [https://lore.kernel.org/lkml/[email protected]/]
2. [https://lore.kernel.org/lkml/[email protected]/]
Fixes: 38e891849003 ("kbuild: lto: fix module versioning")
Co-developed-by: Sami Tolvanen <[email protected]>
Signed-off-by: Lecopzer Chen <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.
$ make
[ snip ]
Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)
This is the only interactive place in the build process.
Commit 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.
Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.
Fixes: 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Tetsuo Handa <[email protected]>
|
|
The commit 042da426f8eb ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.
This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.
Fixes: 042da426f8eb ("scripts/setlocalversion: simplify the short version part")
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.
Before:
#perf sched record sleep 1
event syntax error: 'sched:sched_stat_wait'
\___ unknown tracepoint
Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Solution:
Check whether schedstat tracepoints are exposed. If no, these events are not recorded.
After:
# perf sched record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
# perf sched report
run measurement overhead: 4736 nsecs
sleep measurement overhead: 9059979 nsecs
the run test took 999854 nsecs
the sleep test took 8945271 nsecs
nr_run_events: 716
nr_sleep_events: 785
nr_wakeup_events: 0
...
------------------------------------------------------------
Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Yafang Shao <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.
As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().
Before:
# perf probe -a schedule
schedule is out of .text, skip it.
Error: Failed to add events.
Solution:
Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.
After:
# perf.new.new probe -a schedule
Added new event:
probe:schedule (on schedule)
You can now use it in all perf tools, such as:
perf record -e probe:schedule -aR sleep 1
# perf probe -l
probe:schedule (on schedule@kernel/sched/core.c)
# perf record -e probe:schedule -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
# perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1K of event 'probe:schedule'
# Event count (approx.): 1366
#
# Overhead Command Shared Object Symbol
# ........ ............... ................. ............
#
6.22% migration/0 [kernel.kallsyms] [k] schedule
6.22% migration/1 [kernel.kallsyms] [k] schedule
6.22% migration/2 [kernel.kallsyms] [k] schedule
6.22% migration/3 [kernel.kallsyms] [k] schedule
6.15% migration/10 [kernel.kallsyms] [k] schedule
6.15% migration/11 [kernel.kallsyms] [k] schedule
6.15% migration/12 [kernel.kallsyms] [k] schedule
6.15% migration/13 [kernel.kallsyms] [k] schedule
6.15% migration/14 [kernel.kallsyms] [k] schedule
6.15% migration/15 [kernel.kallsyms] [k] schedule
6.15% migration/4 [kernel.kallsyms] [k] schedule
6.15% migration/5 [kernel.kallsyms] [k] schedule
6.15% migration/6 [kernel.kallsyms] [k] schedule
6.15% migration/7 [kernel.kallsyms] [k] schedule
6.15% migration/8 [kernel.kallsyms] [k] schedule
6.15% migration/9 [kernel.kallsyms] [k] schedule
0.22% rcu_sched [kernel.kallsyms] [k] schedule
...
#
# (Cannot load tips.txt file, please install perf!)
#
Signed-off-by: Yang Jihong <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jianlin Lv <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Li Huafei <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.
The problem is caused by the iterating variable never reaching 0.
Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Zhen Lei <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
ASan reports some memory leaks when running:
# perf test "42: BPF filter"
This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.
This patch adds a goto label before the deallocation and makes the error
path jump to it.
Signed-off-by: Riccardo Mancini <[email protected]>
Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are the patches for this week that came as the fallout of the
merge window:
- Two fixes for the NVidia memory controller driver
- multiple defconfig files get patched to turn CONFIG_FB back on
after that is no longer selected by CONFIG_DRM
- ffa and scmpi firmware drivers fixes, mostly addressing compiler
and documentation warnings
- Platform specific fixes for device tree files on ASpeed, Renesas
and NVidia SoC, mostly for recent regressions.
- A workaround for a regression on the USB PHY with devlink when the
usb-nop-xceiv driver is not available until the rootfs is mounted.
- Device tree compiler warnings in Arm Versatile-AB"
* tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: dts: versatile: Fix up interrupt controller node names
ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
ARM: configs: Update u8500_defconfig
ARM: configs: Update Vexpress defconfig
ARM: configs: Update Versatile defconfig
ARM: configs: Update RealView defconfig
ARM: configs: Update Integrator defconfig
arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
firmware: arm_scmi: Fix range check for the maximum number of pending messages
firmware: arm_scmi: Avoid padding in sensor message structure
firmware: arm_scmi: Fix kernel doc warnings about return values
firmware: arm_scpi: Fix kernel doc warnings
firmware: arm_scmi: Fix kernel doc warnings
ARM: shmobile: defconfig: Restore graphical consoles
firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
firmware: arm_ffa: Fix the comment style
firmware: arm_ffa: Simplify probe function
firmware: arm_ffa: Ensure drivers provide a probe function
firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
firmware: arm_scmi: Ensure drivers provide a probe function
...
|
|
This reverts commit 788691464c29455346dc613a3b43c2fb9e5757a4.
It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code. The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1].
It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).
The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size). But together with
the xfs issue, this all smells like "this commit was not ready" to me.
Link: https://lore.kernel.org/linux-xfs/[email protected]/ [1]
Link: https://lore.kernel.org/lkml/[email protected]/ [2]
Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3]
Reported-by: Christoph Hellwig <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reported-by: Geert Uytterhoeven <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core fix for an oops which can occur if the error handling thread
fails to start for some reason and the driver is removed.
The other fixes are all minor ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()
scsi: mpi3mr: Fix W=1 compilation warnings
scsi: pm8001: Clean up kernel-doc and comments
scsi: zfcp: Report port fc_security as unknown early during remote cable pull
scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
scsi: fas216: Fix a build error
scsi: core: Fix the documentation of the scsi_execute() time parameter
|
|
Pull cifs fixes from Steve French:
"Eight cifs/smb3 fixes, including three for stable.
Three are DFS related fixes, and two to fix problems pointed out by
static checkers"
* tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not share tcp sessions of dfs connections
SMB3.1.1: fix mount failure to some servers when compression enabled
cifs: added WARN_ON for all the count decrements
cifs: fix missing null session check in mount
cifs: handle reconnect of tcon when there is no cached dfs referral
cifs: fix the out of range assignment to bit fields in parse_server_interfaces
cifs: Do not use the original cruid when following DFS links for multiuser mounts
cifs: use the expiry output of dns_query to schedule next resolution
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fixes to kunit tool and documentation:
- fix asserts on older python versions
- fixes to misleading error messages when TAP header format is
incorrect or when file is missing
- documentation fix: drop obsolete information about uml_abort
coverage
- remove unnecessary annotations"
* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Assert the version requirement
kunit: tool: remove unnecessary "annotations" import
Documentation: kunit: drop obsolete note about uml_abort for coverage
kunit: tool: Fix error messages for cases of no tests and wrong TAP header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A fix to memory-hotplug hot-remove test to stop spamming logs with
dump_page() entries and slowing the system down to a crawl"
* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix the histogram logic from possibly crashing the kernel
Working on the histogram code, I found that if you dereference a char
pointer in a trace event that happens to point to user space, it can
crash the kernel, as it does no checks of that pointer. I have code
coming that will do this better, so just remove this ability to treat
character pointers in trace events as stings in the histogram"
* tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not reference char * as a string in histograms
|