aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-03x86/entry: Use the correct fence macro after swapgs in kernel CR3Lai Jiangshan1-7/+8
The commit c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching") removed a CR3 write in the faulting path of load_gs_index(). But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is enabled, see spectre_v1_select_mitigation(). Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3 and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make sure speculation is blocked. [ bp: Massage commit message and comment. ] Fixes: c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching") Signed-off-by: Lai Jiangshan <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-12-03fget: check that the fd still exists after getting a ref to itLinus Torvalds1-0/+4
Jann Horn points out that there is another possible race wrt Unix domain socket garbage collection, somewhat reminiscent of the one fixed in commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). See the extended comment about the garbage collection requirements added to unix_peek_fds() by that commit for details. The race comes from how we can locklessly look up a file descriptor just as it is in the process of being closed, and with the right artificial timing (Jann added a few strategic 'mdelay(500)' calls to do that), the Unix domain socket garbage collector could see the reference count decrement of the close() happen before fget() took its reference to the file and the file was attached onto a new file descriptor. This is all (intentionally) correct on the 'struct file *' side, with RCU lookups and lockless reference counting very much part of the design. Getting that reference count out of order isn't a problem per se. But the garbage collector can get confused by seeing this situation of having seen a file not having any remaining external references and then seeing it being attached to an fd. In commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the fix was to serialize the file descriptor install with the garbage collector by taking and releasing the unix_gc_lock. That's not really an option here, but since this all happens when we are in the process of looking up a file descriptor, we can instead simply just re-check that the file hasn't been closed in the meantime, and just re-do the lookup if we raced with a concurrent close() of the same file descriptor. Reported-and-tested-by: Jann Horn <[email protected]> Acked-by: Miklos Szeredi <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-12-03x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()Lai Jiangshan1-11/+5
Commit 18ec54fdd6d18 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations") added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both branches. This is because the fence is required for both cases since the CR3 write is conditional even when PTI is enabled. But 96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry") changed the order of SWAPGS and the CR3 write. And it missed the needed FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case. Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY can cover both branches. [ bp: Massage, fix typos, remove obsolete comment while at it. ] Fixes: 96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry") Signed-off-by: Lai Jiangshan <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-12-03ARM: socfpga: dts: fix qspi node compatibleDinh Nguyen7-8/+8
The QSPI flash node needs to have the required "jedec,spi-nor" in the compatible string. Fixes: 1df99da8953 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit") Signed-off-by: Dinh Nguyen <[email protected]>
2021-12-03dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schemaRob Herring1-12/+2
The if/then schema for 'data-lanes' doesn't work as 'compatible' is at a different level than 'data-lanes'. To make it work, the if/then schema would have to be moved to the top level and then whole hierarchy of nodes down to 'data-lanes' created. I don't think it is worth the complexity to do that, so let's just drop it. The error in this schema is masked by a fixup in the tools causing the 'allOf' to get overwritten. Removing the fixup as part of moving to json-schema draft 2019-09 revealed the issue: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@30750000: ports:port@0:endpoint:data-lanes:0: [1] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@32e30000: ports:port@0:endpoint:data-lanes:0: [1, 2, 3, 4] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml The if condition was always true because 'compatible' did not exist in 'endpoint' node and a non-existent property is true for json-schema. Fixes: 85b62ff2cb97 ("media: dt-bindings: media: nxp,imx7-mipi-csi2: Add i.MX8MM support") Cc: Rui Miguel Silva <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Rui Miguel Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-03of/irq: Add a quirk for controllers with their own definition of interrupt-mapMarc Zyngier1-2/+25
Since commit 041284181226 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller"), a handful of interrupt controllers have stopped working correctly. This is due to the DT exposing a non-sensical interrupt-map property, and their drivers relying on the kernel ignoring this property. Since we cannot realistically fix this terrible behaviour, add a quirk for the limited set of devices that have implemented this monster, and document that this is a pretty bad practice. Fixes: 041284181226 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller") Cc: Rob Herring <[email protected]> Cc: John Crispin <[email protected]> Cc: Biwen Li <[email protected]> Cc: Chris Brandt <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Sander Vanheule <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2021-12-03Merge branch 'powercap'Rafael J. Wysocki1-5/+0
Merge DTPM fixes for 5.16-rc4. * powercap: powercap: DTPM: Drop unused local variable from init_dtpm() powercap/drivers/dtpm: Disable DTPM at boot time
2021-12-03x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qwordMichael Sterritt1-18/+39
Properly type the operands being passed to __put_user()/__get_user(). Otherwise, these routines truncate data for dependent instructions (e.g., INSW) and only read/write one byte. This has been tested by sending a string with REP OUTSW to a port and then reading it back in with REP INSW on the same port. Previous behavior was to only send and receive the first char of the size. For example, word operations for "abcd" would only read/write "ac". With change, the full string is now written and read back. Fixes: f980f9c31a923 (x86/sev-es: Compile early handler code into kernel image) Signed-off-by: Michael Sterritt <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Paolo Bonzini <[email protected]> Reviewed-by: Marc Orr <[email protected]> Reviewed-by: Peter Gonda <[email protected]> Reviewed-by: Joerg Roedel <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-12-03powercap: DTPM: Drop unused local variable from init_dtpm()Rafael J. Wysocki1-2/+0
The dtpm_descr variable in init_dtpm() is not used after commit f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time"), so drop it. Fixes: f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-12-03net: altera: set a couple error code in probe()Dan Carpenter1-3/+6
There are two error paths which accidentally return success instead of a negative error code. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03net: bcm4908: Handle dma_set_coherent_mask error codesJiasheng Jiang1-1/+3
The return value of dma_set_coherent_mask() is not always 0. To catch the exception in case that dma is not support the mask. Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding") Signed-off-by: Jiasheng Jiang <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03selftests: net/fcnal-test.sh: add exit codeLi Zhijian1-0/+8
Previously, the selftest framework always treats it as *ok* even though some of them are failed actually. That's because the script always returns 0. It supports PASS/FAIL/SKIP exit code now. CC: Philip Li <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Li Zhijian <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03bonding: make tx_rebalance_counter an atomicEric Dumazet2-7/+9
KCSAN reported a data-race [1] around tx_rebalance_counter which can be accessed from different contexts, without the protection of a lock/mutex. [1] BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0: bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613 bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949 do_set_master net/core/rtnetlink.c:2521 [inline] __rtnl_newlink net/core/rtnetlink.c:3475 [inline] rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2492 __do_sys_sendmsg net/socket.c:2501 [inline] __se_sys_sendmsg net/socket.c:2499 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2499 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1: bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298 worker_thread+0x616/0xa70 kernel/workqueue.c:2445 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x00000001 -> 0x00000064 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bond1 bond_alb_monitor Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03tcp: fix another uninit-value (sk_rx_queue_mapping)Eric Dumazet2-2/+15
KMSAN is still not happy [1]. I missed that passive connections do not inherit their sk_rx_queue_mapping values from the request socket, but instead tcp_child_process() is calling sk_mark_napi_id(child, skb) We have many sk_mark_napi_id() callers, so I am providing a new helper, forcing the setting sk_rx_queue_mapping and sk_napi_id. Note that we had no KMSAN report for sk_napi_id because passive connections got a copy of this field from the listener. sk_rx_queue_mapping in the other hand is inside the sk_dontcopy_begin/sk_dontcopy_end so sk_clone_lock() leaves this field uninitialized. We might remove dead code populating req->sk_rx_queue_mapping in the future. [1] BUG: KMSAN: uninit-value in __sk_rx_queue_set include/net/sock.h:1924 [inline] BUG: KMSAN: uninit-value in sk_rx_queue_update include/net/sock.h:1938 [inline] BUG: KMSAN: uninit-value in sk_mark_napi_id include/net/busy_poll.h:136 [inline] BUG: KMSAN: uninit-value in tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833 __sk_rx_queue_set include/net/sock.h:1924 [inline] sk_rx_queue_update include/net/sock.h:1938 [inline] sk_mark_napi_id include/net/busy_poll.h:136 [inline] tcp_child_process+0xb42/0x1050 net/ipv4/tcp_minisocks.c:833 tcp_v4_rcv+0x3d83/0x4ed0 net/ipv4/tcp_ipv4.c:2066 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 run_ksoftirqd+0x33/0x50 kernel/softirq.c:920 smpboot_thread_fn+0x616/0xbf0 kernel/smpboot.c:164 kthread+0x721/0x850 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 Uninit was created at: __alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409 alloc_pages+0x8a5/0xb80 alloc_slab_page mm/slub.c:1810 [inline] allocate_slab+0x287/0x1c20 mm/slub.c:1947 new_slab mm/slub.c:2010 [inline] ___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039 __slab_alloc mm/slub.c:3126 [inline] slab_alloc_node mm/slub.c:3217 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264 sk_prot_alloc+0xeb/0x570 net/core/sock.c:1914 sk_clone_lock+0xd6/0x1940 net/core/sock.c:2118 inet_csk_clone_lock+0x8d/0x6a0 net/ipv4/inet_connection_sock.c:956 tcp_create_openreq_child+0xb1/0x1ef0 net/ipv4/tcp_minisocks.c:453 tcp_v4_syn_recv_sock+0x268/0x2710 net/ipv4/tcp_ipv4.c:1563 tcp_check_req+0x207c/0x2a30 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x36f5/0x4ed0 net/ipv4/tcp_ipv4.c:2047 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 Fixes: 342159ee394d ("net: avoid dirtying sk->sk_rx_queue_mapping") Fixes: a37a0ee4d25c ("net: avoid uninit-value from tcp_conn_request") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Tested-by: Alexander Potapenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03inet: use #ifdef CONFIG_SOCK_RX_QUEUE_MAPPING consistentlyEric Dumazet1-1/+1
Since commit 4e1beecc3b58 ("net/sock: Add kernel config SOCK_RX_QUEUE_MAPPING"), sk_rx_queue_mapping access is guarded by CONFIG_SOCK_RX_QUEUE_MAPPING. Fixes: 54b92e841937 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.") Signed-off-by: Eric Dumazet <[email protected]> Cc: Kuniyuki Iwashima <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Tariq Toukan <[email protected]> Acked-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03ALSA: hda/realtek: Fix quirk for TongFang PHxTxX1Werner Sembach1-18/+22
This fixes the SND_PCI_QUIRK(...) of the TongFang PHxTxX1 barebone. This fixes the issue of sound not working after s3 suspend. When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of 0x0020. Setting the value manually makes the sound work again. This patch does this automatically. While being on it, I also fixed the comment formatting of the quirk and shortened variable and function names. Signed-off-by: Werner Sembach <[email protected]> Fixes: dd6dd6e3c791 ("ALSA: hda/realtek: Add quirk for TongFang PHxTxX1") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-12-03mtd: dataflash: Add device-tree SPI IDsJon Hunter1-0/+8
Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") added a test to check that every SPI driver has a spi_device_id for each DT compatiable string defined by the driver and warns if the spi_device_id is missing. The spi_device_ids are missing for the dataflash driver and the following warnings are now seen. WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,at45 WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,dataflash Fix this by adding the necessary spi_device_ids. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Jon Hunter <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03mtd: rawnand: fsmc: Fix timing computationHerve Codina1-8/+24
Under certain circumstances, the timing settings calculated by the FSMC NAND controller driver were inaccurate. These settings led to incorrect data reads or fallback to timing mode 0 depending on the NAND chip used. The timing computation did not take into account the following constraint given in SPEAr3xx reference manual: twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL Enhance the timings calculation by taking into account this additional constraint. This change has no impact on slow timing modes such as mode 0. Indeed, on mode 0, computed values are the same with and without the patch. NANDs which previously stayed in mode 0 because of fallback to mode 0 can now work at higher speeds and NANDs which were not working at all because of the corrupted data work at high speeds without troubles. Overall improvement on a Micron/MT29F1G08 (flash_speed tool): mode0 mode3 eraseblock write speed 3220 KiB/s 4511 KiB/s eraseblock read speed 4491 KiB/s 7529 KiB/s Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings") Signed-off-by: Herve Codina <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03mtd: rawnand: fsmc: Take instruction delay into accountHerve Codina1-0/+4
The FSMC NAND controller should apply a delay after the instruction has been issued on the bus. The FSMC NAND controller driver did not handle this delay. Add this waiting delay in the FSMC NAND controller driver. Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()") Signed-off-by: Herve Codina <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03mtd: rawnand: Fix nand_choose_best_timings() on unsupported interfaceHerve Codina1-2/+2
When the NV-DDR interface is not supported by the NAND chip, the value of onfi->nvddr_timing_modes is 0. In this case, the best_mode variable value in nand_choose_best_nvddr_timings() is -1. The last for-loop is skipped and the function returns an uninitialized value. If this returned value is 0, the nand_choose_best_sdr_timings() is not executed and no 'best timing' are set. This leads the host controller and the NAND chip working at default mode 0 timing even if a better timing can be used. Fix this uninitialized returned value. nand_choose_best_sdr_timings() is pretty similar to nand_choose_best_nvddr_timings(). Even if onfi->sdr_timing_modes should never be seen as 0, nand_choose_best_sdr_timings() returned value is fixed. Fixes: a9ecc8c814e9 ("mtd: rawnand: Choose the best timings, NV-DDR included") Signed-off-by: Herve Codina <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03mtd: rawnand: Fix nand_erase_op delayHerve Codina1-1/+1
NAND_OP_CMD() expects a delay parameter in nanoseconds. The delay value is wrongly given in milliseconds. Fix the conversion macro used in order to set this delay in nanoseconds. Fixes: d7a773e8812b ("mtd: rawnand: Access SDR and NV-DDR timings through a common macro") Signed-off-by: Herve Codina <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03mtd: rawnand: denali: Add the dependency on HAS_IOMEMCai Huoqing1-1/+1
The helper function devm_platform_ioremap_resource_xxx() needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM. Fixes: 5f14a8ca1b49 ("mtd: rawnand: denali: Make use of the helper function devm_platform_ioremap_resource_byname()") Signed-off-by: Cai Huoqing <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-12-03misc: rtsx: Avoid mangling IRQ during runtime PMKai-Heng Feng1-4/+0
After commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM"), when the rtsx controller is runtime suspended, bring CPUs offline and back online, the runtime resume of the controller will fail: [ 47.319391] smpboot: CPU 1 is now offline [ 47.414140] x86: Booting SMP configuration: [ 47.414147] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 47.571334] smpboot: CPU 2 is now offline [ 47.686055] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 47.808174] smpboot: CPU 3 is now offline [ 47.878146] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 48.003679] smpboot: CPU 4 is now offline [ 48.086187] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 48.239627] smpboot: CPU 5 is now offline [ 48.326059] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 48.472193] smpboot: CPU 6 is now offline [ 48.574181] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 48.743375] smpboot: CPU 7 is now offline [ 48.838047] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 48.965447] __common_interrupt: 1.35 No irq handler for vector [ 51.174065] mmc0: error -110 doing runtime resume [ 54.978088] I/O error, dev mmcblk0, sector 21479 op 0x1:(WRITE) flags 0x0 phys_seg 11 prio class 0 [ 54.978108] Buffer I/O error on dev mmcblk0p1, logical block 19431, lost async page write [ 54.978129] Buffer I/O error on dev mmcblk0p1, logical block 19432, lost async page write [ 54.978134] Buffer I/O error on dev mmcblk0p1, logical block 19433, lost async page write [ 54.978137] Buffer I/O error on dev mmcblk0p1, logical block 19434, lost async page write [ 54.978141] Buffer I/O error on dev mmcblk0p1, logical block 19435, lost async page write [ 54.978145] Buffer I/O error on dev mmcblk0p1, logical block 19436, lost async page write [ 54.978148] Buffer I/O error on dev mmcblk0p1, logical block 19437, lost async page write [ 54.978152] Buffer I/O error on dev mmcblk0p1, logical block 19438, lost async page write [ 54.978155] Buffer I/O error on dev mmcblk0p1, logical block 19439, lost async page write [ 54.978160] Buffer I/O error on dev mmcblk0p1, logical block 19440, lost async page write [ 54.978244] mmc0: card aaaa removed [ 54.978452] FAT-fs (mmcblk0p1): FAT read failed (blocknr 4257) There's interrupt immediately raised on rtsx_pci_write_register() in runtime resume routine, but the IRQ handler hasn't registered yet. So we can either move rtsx_pci_write_register() after rtsx_pci_acquire_irq(), or just stop mangling IRQ on runtime PM. Choose the latter to save some CPU cycles. Fixes: 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") Cc: stable <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> BugLink: https://bugs.launchpad.net/bugs/1951784 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03io-wq: don't retry task_work creation failure on fatal conditionsJens Axboe1-0/+7
We don't want to be retrying task_work creation failure if there's an actual signal pending for the parent task. If we do, then we can enter an infinite loop of perpetually retrying and each retry failing with -ERESTARTNOINTR because a signal is pending. Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals") Reported-by: Florian Fischer <[email protected]> Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/ Tested-by: Florian Fischer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-12-03nvmem: eeprom: at25: fix FRAM byte_lenRalph Siemsen1-20/+18
Commit fd307a4ad332 ("nvmem: prepare basics for FRAM support") added support for FRAM devices such as the Cypress FM25V. During testing, it was found that the FRAM detects properly, however reads and writes fail. Upon further investigation, two problem were found in at25_probe() routine. 1) In the case of an FRAM device without platform data, eg. fram == true && spi->dev.platform_data == NULL the stack local variable "struct spi_eeprom chip" is not initialized fully, prior to being copied into at25->chip. The chip.flags field in particular can cause problems. 2) The byte_len of FRAM is computed from its ID register, and is stored into the stack local "struct spi_eeprom chip" structure. This happens after the same structure has been copied into at25->chip. As a result, at25->chip.byte_len does not contain the correct length of the device. In turn this can cause checks at beginning of at25_ee_read() to fail (or equally, it could allow reads beyond the end of the device length). Fix both of these issues by eliminating the on-stack struct spi_eeprom. Instead use the one inside at25_data structure, which starts of zeroed. Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support") Cc: stable <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Ralph Siemsen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03misc: fastrpc: fix improper packet size calculationJeya R1-4/+6
The buffer list is sorted and this is not being considered while calculating packet size. This would lead to improper copy length calculation for non-dmaheap buffers which would eventually cause sending improper buffers to DSP. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Reviewed-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Jeya R <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03MAINTAINERS: add maintainer for Qualcomm FastRPC driverSrinivas Kandagatla1-0/+9
For some reason I forgot to add myself as maintainer when we upstreamed FastRPC patches. Add myself and Amol from Qualcomm as maintainers for Qualcomm FastRPC driver. Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03serial: 8250_bcm7271: UART errors after resuming from S2Al Cooper1-0/+13
There is a small window in time during resume where the hardware flow control signal RTS can be asserted (which allows a sender to resume sending data to the UART) but the baud rate has not yet been restored. This will cause corrupted data and FRAMING, OVERRUN and BREAK errors. This is happening because the MCTRL register is shadowed in uart_port struct and is later used during resume to set the MCTRL register during both serial8250_do_startup() and uart_resume_port(). Unfortunately, serial8250_do_startup() happens before the UART baud rate is restored. The fix is to clear the shadowed mctrl value at the end of suspend and restore it at the end of resume. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Al Cooper <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03drm/ttm: fix ttm_bo_swapoutChristian König1-1/+2
Commit 7120a447c7fe ("drm/ttm: Double check mem_type of BO while eviction") made ttm_bo_evict_swapout_allowable() function actually check the placement, but we always used a dummy placement in ttm_bo_swapout. Fix this by using the real placement instead. Signed-off-by: Christian König <[email protected]> Fixes: 7120a447c7fe ("drm/ttm: Double check mem_type of BO while eviction") Reviewed-by: Pan, Xinhui <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-03usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()Zhou Qingyang1-0/+3
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <[email protected]> Acked-by: Pawel Laszczak <[email protected]> Acked-by: Peter Chen <[email protected]> Signed-off-by: Zhou Qingyang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03usb: cdns3: gadget: fix new urb never complete if ep cancel previous requestsFrank Li1-16/+4
This issue was found at android12 MTP. 1. MTP submit many out urb request. 2. Cancel left requests (>20) when enough data get from host 3. Send ACK by IN endpoint. 4. MTP submit new out urb request. 5. 4's urb never complete. TRACE LOG: MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0 MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0 .... MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414 .... irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0 irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0 irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184 Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong. The TRB link is below when irq happen. DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). Original code check LINK TRB, but DEQ just move one step. LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). This patch skip all LINK TRB and sync DEQ to trb's start. LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START DMA(EP_TRADDR). Acked-by: Peter Chen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Jun Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnectBadhri Jagan Sridharan1-4/+0
Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." This change makes TCPM to wait in SNK_DEBOUNCED state until CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously, TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON. This causes TCPM to loop continuously when connected to a faulty power source that does not present vbus. Waiting in SNK_DEBOUNCED also ensures that TCPM is adherant to "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements. [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6169.931296] disable vbus discharge ret:0 [ 6169.931301] Setting usb_comm capable false [ 6169.932783] Setting voltage/current limit 0 mV 0 mA [ 6169.932802] polarity 0 [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0 [ 6169.936689] cc:=0 [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS] [ 6170.036896] Start toggling [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6170.693304] disable vbus discharge ret:0 [ 6170.693308] Setting usb_comm capable false [ 6170.695193] Setting voltage/current limit 0 mV 0 mA [ 6170.695210] polarity 0 [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0 [ 6170.701896] cc:=0 [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: [email protected] Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Badhri Jagan Sridharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03USB: NO_LPM quirk Lenovo Powered USB-C Travel HubOle Ernst1-0/+3
This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03xhci: Fix commad ring abort, write all 64 bits to CRCR register.Mathias Nyman1-7/+14
Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: [email protected] Tested-by: Pavankumar Kondeti <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03selftests/tc-testing: Fix cannot create /sys/bus/netdevsim/new_device: ↵Li Zhijian2-0/+2
Directory nonexistent Install netdevsim to provide /sys/bus/netdevsim/new_device interface. It helps to fix: # ok 97 9a7d - Change ETS strict band without quantum # skipped - skipped - previous setup failed 11 ce7d # # # -----> prepare stage *** Could not execute: "echo "1 1 4" > /sys/bus/netdevsim/new_device" # # -----> prepare stage *** Error message: "/bin/sh: 1: cannot create /sys/bus/netdevsim/new_device: Directory nonexistent # " # # -----> prepare stage *** Aborting test run. # # # <_io.BufferedReader name=5> *** stdout *** # Signed-off-by: Li Zhijian <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03selftests/tc-testing: add missing configLi Zhijian1-0/+1
qdiscs/fq_pie requires CONFIG_NET_SCH_FQ_PIE, otherwise tc will fail to create a fq_pie qdisc. It fixes following issue: # not ok 57 83be - Create FQ-PIE with invalid number of flows # Command exited with 2, expected 0 # Error: Specified qdisc not found. Signed-off-by: Li Zhijian <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03selftests/tc-testing: add exit codeLi Zhijian1-3/+5
Mark the summary result as FAIL to prevent from confusing the selftest framework if some of them are failed. Previously, the selftest framework always treats it as *ok* even though some of them are failed actually. That's because the script tdc.sh always return 0. # All test results: # # 1..97 # ok 1 83be - Create FQ-PIE with invalid number of flows # ok 2 8b6e - Create RED with no flags [...snip] # ok 6 5f15 - Create RED with flags ECN, harddrop # ok 7 53e8 - Create RED with flags ECN, nodrop # ok 8 d091 - Fail to create RED with only nodrop flag # ok 9 af8e - Create RED with flags ECN, nodrop, harddrop # not ok 10 ce7d - Add mq Qdisc to multi-queue device (4 queues) # Could not match regex pattern. Verify command output: # qdisc mq 1: root # qdisc fq_codel 0: parent 1:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 # qdisc fq_codel 0: parent 1:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64 [...snip] # ok 96 6979 - Change quantum of a strict ETS band # ok 97 9a7d - Change ETS strict band without quantum # # # # ok 1 selftests: tc-testing: tdc.sh <<< summary result CC: Philip Li <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Li Zhijian <[email protected]> Acked-by: Davide Caratti <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-03bus: mhi: pci_generic: Fix device recovery failed issueSlark Xiao1-1/+1
For Foxconn T99W175 device(sdx55 platform) in some host platform, it would be unavailable once the host execute the err handler. After checking, it's caused by the delay time too short to get a successful reset. Please see my test evidence as bewlow(BTW, I add some extra test logs in function mhi_pci_reset_prepare and mhi_pci_reset_done): When MHI_POST_RESET_DELAY_MS equals to 500ms: Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms: Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller When MHI_POST_RESET_DELAY_MS equals to 2000ms: Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode I also tried big data like 3000, and it worked as well. 500ms may not be enough for all support mhi device. We shall increase it to 2000ms at least. Link: https://lore.kernel.org/r/[email protected] [mani: massaged commit message little bit, added Fixes tag and CCed stable] Fixes: 8ccc3279fcad ("mhi: pci_generic: Add support for reset") Cc: [email protected] Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Slark Xiao <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-03Merge tag 'phy-fixes-5.16' of ↵Greg Kroah-Hartman11-25/+30
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: fixes for 5.16 Fixes for: - kernel-doc warnings for various drivers - error handling fix for HiSilicon driver - name fix for zynqmp phy - property name fix in stm32 phy * tag 'phy-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: HiSilicon: Fix copy and paste bug in error handling dt-bindings: phy: zynqmp-psgtr: fix USB phy name phy: ti: omap-usb2: Fix the kernel-doc style phy: qualcomm: ipq806x-usb: Fix kernel-doc style phy: ti: tusb1210: Fix the kernel-doc warn phy: qualcomm: usb-hsic: Fix the kernel-doc warn phy: qualcomm: qmp: Add missing struct documentation phy: mvebu-cp110-utmi: Fix kernel-doc warns phy: ti: report 2 non-kernel-doc comments phy: stm32: fix st,slow-hs-slew-rate with st,decrease-hs-slew-rate
2021-12-03HID: intel-ish-hid: ipc: only enable IRQ wakeup when requestedThomas Weißschuh1-2/+4
Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on lid close. These wakeups are generated by interrupts from the ISH on changes to the lid status. By disabling the wake IRQ from the ISH we inhibit these spurious wakeups while keeping the resume from LID open through the ACPI interrupt. Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6 is also affected. Fixes: ae02e5d40d5f ("HID: intel-ish-hid: ipc layer") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855 Signed-off-by: Thomas Weißschuh <[email protected]> Acked-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-03HID: google: add eel USB idxiazhengqiao2-0/+3
Add one additional hammer-like device. Signed-off-by: xiazhengqiao <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com
2021-12-03HID: add USB_HID dependancy to hid-prodikeysGreg Kroah-Hartman1-1/+1
The prodikeys HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like nios2 when building due to new changes to the prodikeys driver. Reported-by: kernel test robot <[email protected]> Cc: [email protected] Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-03HID: add USB_HID dependancy to hid-chiconyGreg Kroah-Hartman1-1/+1
The chicony HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like sparc when building due to new changes to the chicony driver. Reported-by: Stephen Rothwell <[email protected]> Cc: [email protected] Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-03x86/64/mm: Map all kernel memory into trampoline_pgdJoerg Roedel1-1/+11
The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff range of kernel memory (with 4-level paging). This range contains the kernel's text+data+bss mappings and the module mapping space but not the direct mapping and the vmalloc area. This is enough to get the application processors out of real-mode, but for code that switches back to real-mode the trampoline_pgd is missing important parts of the address space. For example, consider this code from arch/x86/kernel/reboot.c, function machine_real_restart() for a 64-bit kernel: #ifdef CONFIG_X86_32 load_cr3(initial_page_table); #else write_cr3(real_mode_header->trampoline_pgd); /* Exiting long mode will fail if CR4.PCIDE is set. */ if (boot_cpu_has(X86_FEATURE_PCID)) cr4_clear_bits(X86_CR4_PCIDE); #endif /* Jump to the identity-mapped low memory code */ #ifdef CONFIG_X86_32 asm volatile("jmpl *%0" : : "rm" (real_mode_header->machine_real_restart_asm), "a" (type)); #else asm volatile("ljmpl *%0" : : "m" (real_mode_header->machine_real_restart_asm), "D" (type)); #endif The code switches to the trampoline_pgd, which unmaps the direct mapping and also the kernel stack. The call to cr4_clear_bits() will find no stack and crash the machine. The real_mode_header pointer below points into the direct mapping, and dereferencing it also causes a crash. The reason this does not crash always is only that kernel mappings are global and the CR3 switch does not flush those mappings. But if theses mappings are not in the TLB already, the above code will crash before it can jump to the real-mode stub. Extend the trampoline_pgd to contain all kernel mappings to prevent these crashes and to make code which runs on this page-table more robust. Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2021-12-03objtool: Fix pv_ops noinstr validationPeter Zijlstra2-0/+5
Boris reported that in one of his randconfig builds, objtool got infinitely stuck. Turns out there's trivial list corruption in the pv_ops tracking when a function is both in a static table and in a code assignment. Avoid re-adding function to the pv_ops[] lists when they're already on it. Fixes: db2b0c5d7b6f ("objtool: Support pv_opsindirect calls for noinstr") Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-12-02scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()Igor Pylypiv1-4/+2
Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host() Link: https://lore.kernel.org/r/[email protected] Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: Vishakha Channapattan <[email protected]> Acked-by: Jack Wang <[email protected]> Signed-off-by: Igor Pylypiv <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-12-02selftests/fib_tests: Rework fib_rp_filter_test()Peilin Ye1-10/+49
Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are failing. ping sockets are bound to dummy1 using the "-I" option (SO_BINDTODEVICE), but socket lookup is failing when receiving ping replies, since the routing table thinks they belong to dummy0. For example, suppose ping is using a SOCK_RAW socket for ICMP messages. When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the raw_sk_bound_dev_eq() check fails. Similar things happen in ping_lookup() for SOCK_DGRAM sockets. These tests used to pass due to a bug [1] in iputils, where "ping -I" actually did not bind ICMP message sockets to device. The bug has been fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket to the specific device") in 2016, which is why our rp_filter tests started to fail. See [2] . Fixing the tests while keeping everything in one netns turns out to be nontrivial. Rework the tests and build the following topology: ┌─────────────────────────────┐ ┌─────────────────────────────┐ │ network namespace 1 (ns1) │ │ network namespace 2 (ns2) │ │ │ │ │ │ ┌────┐ ┌─────┐ │ │ ┌─────┐ ┌────┐ │ │ │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │ │ │ └────┘ ├─────┴──────┐ │ │ ├─────┴──────┐ └────┘ │ │ │192.0.2.1/24│ │ │ │192.0.2.1/24│ │ │ └────────────┘ │ │ └────────────┘ │ └─────────────────────────────┘ └─────────────────────────────┘ Consider sending an ICMP_ECHO packet A in ns2. Both source and destination IP addresses are 192.0.2.1, and we use strict mode rp_filter in both ns1 and ns2: 1. A is routed to lo since its destination IP address is one of ns2's local addresses (veth2); 2. A is redirected from lo's egress to veth2's egress using mirred; 3. A arrives at veth1's ingress in ns1; 4. A is redirected from veth1's ingress to lo's ingress, again, using mirred; 5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false, since A was received on lo, but reverse path lookup says veth1; 6. However A is not dropped since we have relaxed this check for lo in commit 66f8209547cc ("fib: relax source validation check for loopback packets"); Making sure A is not dropped here in this corner case is the whole point of having this test. 7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is generated; 8. Similarly, B is redirected from lo's egress to veth1's egress (in ns1), then redirected once again from veth2's ingress to lo's ingress (in ns2), using mirred. Also test "ping 127.0.0.1" from ns2. It does not trigger the relaxed check in __fib_validate_source(), but just to make sure the topology works with loopback addresses. Tested with ping from iputils 20210722-41-gf9fb573: $ ./fib_tests.sh -t rp_filter IPv4 rp_filter tests TEST: rp_filter passes local packets [ OK ] TEST: rp_filter passes loopback packets [ OK ] [1] https://github.com/iputils/iputils/issues/55 [2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d Reported-by: Hangbin Liu <[email protected]> Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter") Reviewed-by: Cong Wang <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Acked-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-02clk: imx: use module_platform_driverMiles Chen2-2/+2
Replace builtin_platform_driver_probe with module_platform_driver_probe because CONFIG_CLK_IMX8QXP can be set to =m (kernel module). Fixes: e0d0d4d86c766 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module") Cc: Fabio Estevam <[email protected]> Cc: Stephen Boyd <[email protected]> Signed-off-by: Miles Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2021-12-02clk: qcom: clk-alpha-pll: Don't reconfigure running TrionBjorn Andersson1-0/+9
In the event that the bootloader has configured the Trion PLL as source for the display clocks, e.g. for the continuous splashscreen, then there will also be RCGs that are clocked by this instance. Reconfiguring, and in particular disabling the output of, the PLL will cause issues for these downstream RCGs and has been shown to prevent them from being re-parented. Follow downstream and skip configuration if it's determined that the PLL is already running. Fixes: 59128c20a6a9 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs") Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Robert Foss <[email protected]> Reviewed-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2021-12-02clk: qcom: regmap-mux: fix parent clock lookupDmitry Baryshkov3-1/+15
The function mux_get_parent() uses qcom_find_src_index() to find the parent clock index, which is incorrect: qcom_find_src_index() uses src enum for the lookup, while mux_get_parent() should use cfg field (which corresponds to the register value). Add qcom_find_cfg_index() function doing this kind of lookup and use it for mux parent lookup. Fixes: df964016490b ("clk: qcom: add parent map for regmap mux") Cc: [email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.