aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-07IB/hfi1: Fix early init panicMike Marciniszyn3-3/+6
The following trace can be observed with an init failure such as firmware load failures: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 0 PID: 537 Comm: kworker/0:3 Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1 Workqueue: events work_for_cpu_fn RIP: 0010:0x0 Code: Bad RIP value. RSP: 0000:ffffae5f878a3c98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff95e48e025c00 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff95e48e025c00 RBP: ffff95e4bf3660a4 R08: 0000000000000000 R09: ffffffff86d5e100 R10: ffff95e49e1de600 R11: 0000000000000001 R12: ffff95e4bf366180 R13: ffff95e48e025c00 R14: ffff95e4bf366028 R15: ffff95e4bf366000 FS: 0000000000000000(0000) GS:ffff95e4df200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000f86a0a003 CR4: 00000000001606f0 Call Trace: receive_context_interrupt+0x1f/0x40 [hfi1] __free_irq+0x201/0x300 free_irq+0x2e/0x60 pci_free_irq+0x18/0x30 msix_free_irq.part.2+0x46/0x80 [hfi1] msix_clean_up_interrupts+0x2b/0x70 [hfi1] hfi1_init_dd+0x640/0x1a90 [hfi1] do_init_one.isra.19+0x34d/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 The free_irq() results in a callback to the registered interrupt handler, and rcd->do_interrupt is NULL because the receive context data structures are not fully initialized. Fix by ensuring that the do_interrupt is always assigned and adding a guards in the slow path handler to detect and handle a partially initialized receive context and noop the receive. Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Fixes: b0ba3c18d6bf ("IB/hfi1: Move normal functions from hfi1_devdata to const array") Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-12-07IB/hfi1: Insure use of smp_processor_id() is preempt disabledMike Marciniszyn1-1/+1
The following BUG has just surfaced with our 5.16 testing: BUG: using smp_processor_id() in preemptible [00000000] code: mpicheck/1581081 caller is sdma_select_user_engine+0x72/0x210 [hfi1] CPU: 0 PID: 1581081 Comm: mpicheck Tainted: G S 5.16.0-rc1+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 Call Trace: <TASK> dump_stack_lvl+0x33/0x42 check_preemption_disabled+0xbf/0xe0 sdma_select_user_engine+0x72/0x210 [hfi1] ? _raw_spin_unlock_irqrestore+0x1f/0x31 ? hfi1_mmu_rb_insert+0x6b/0x200 [hfi1] hfi1_user_sdma_process_request+0xa02/0x1120 [hfi1] ? hfi1_write_iter+0xb8/0x200 [hfi1] hfi1_write_iter+0xb8/0x200 [hfi1] do_iter_readv_writev+0x163/0x1c0 do_iter_write+0x80/0x1c0 vfs_writev+0x88/0x1a0 ? recalibrate_cpu_khz+0x10/0x10 ? ktime_get+0x3e/0xa0 ? __fget_files+0x66/0xa0 do_writev+0x65/0x100 do_syscall_64+0x3a/0x80 Fix this long standing bug by moving the smp_processor_id() to after the rcu_read_lock(). The rcu_read_lock() implicitly disables preemption. Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup") Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-12-07IB/hfi1: Correct guard on eager buffer deallocationMike Marciniszyn1-1/+1
The code tests the dma address which legitimately can be 0. The code should test the kernel logical address to avoid leaking eager buffer allocations that happen to map to a dma address of 0. Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-12-07nvme: fix use after free when disconnecting a reconnecting ctrlRuozhu Li2-1/+2
A crash happens when trying to disconnect a reconnecting ctrl: 1) The network was cut off when the connection was just established, scan work hang there waiting for some IOs complete. Those I/Os were retried because we return BLK_STS_RESOURCE to blk in reconnecting. 2) After a while, I tried to disconnect this connection. This procedure also hangs because it tried to obtain ctrl->scan_lock. It should be noted that now we have switched the controller state to NVME_CTRL_DELETING. 3) In nvme_check_ready(), we always return true when ctrl->state is NVME_CTRL_DELETING, so those retrying I/Os were issued to the bottom device which was already freed. To fix this, when ctrl->state is NVME_CTRL_DELETING, issue cmd to bottom device only when queue state is live. If not, return host path error to the block layer Signed-off-by: Ruozhu Li <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-12-07nvme-multipath: set ana_log_size to 0 after free ana_log_bufHou Tao1-1/+2
Set ana_log_size to 0 when ana_log_buf is freed to make sure nvme_mpath_init_identify will do the right thing when retrying after an earlier failure. Signed-off-by: Hou Tao <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-12-07PCI: apple: Follow the PCIe specifications when resetting the portMarc Zyngier1-1/+11
While the Apple PCIe driver works correctly when directly booted from the firmware, it fails to initialise when the kernel is booted from a bootloader using PCIe such as u-boot. That's because we're missing a proper reset of the port (we only clear the reset, but never assert it). The PCIe spec requirements are two-fold: - PERST# must be asserted before setting up the clocks and stay asserted for at least 100us (Tperst-clk) - Once PERST# is deasserted, the OS must wait for at least 100ms "from the end of a Conventional Reset" before we can start talking to the devices Implementing this results in a booting system. [bhelgaas: #PERST -> PERST#, update spec references to current] Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Luca Ceresoli <[email protected]> Acked-by: Pali Rohár <[email protected]> Cc: Alyssa Rosenzweig <[email protected]> Cc: Lorenzo Pieralisi <[email protected]>
2021-12-07netfs: fix parameter of cleanup()Jeffle Xu1-3/+3
The order of these two parameters is just reversed. gcc didn't warn on that, probably because 'void *' can be converted from or to other pointer types without warning. Cc: [email protected] Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Fixes: e1b1240c1ff5 ("netfs: Add write_begin helper") Signed-off-by: Jeffle Xu <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Link: https://lore.kernel.org/r/[email protected]/ # v1
2021-12-07MAINTAINERS: update Kalle Valo's emailKalle Valo1-6/+6
I switched to using [email protected], update MAINTAINERS file. Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-07netfs: Fix lockdep warning from taking sb_writers whilst holding mmap_lockDavid Howells1-10/+5
Taking sb_writers whilst holding mmap_lock isn't allowed and will result in a lockdep warning like that below. The problem comes from cachefiles needing to take the sb_writers lock in order to do a write to the cache, but being asked to do this by netfslib called from readpage, readahead or write_begin[1]. Fix this by always offloading the write to the cache off to a worker thread. The main thread doesn't need to wait for it, so deadlock can be avoided. This can be tested by running the quick xfstests on something like afs or ceph with lockdep enabled. WARNING: possible circular locking dependency detected 5.15.0-rc1-build2+ #292 Not tainted ------------------------------------------------------ holetest/65517 is trying to acquire lock: ffff88810c81d730 (mapping.invalidate_lock#3){.+.+}-{3:3}, at: filemap_fault+0x276/0x7a5 but task is already holding lock: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&mm->mmap_lock#2){++++}-{3:3}: validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b __might_fault+0x87/0xb1 strncpy_from_user+0x25/0x18c removexattr+0x7c/0xe5 __do_sys_fremovexattr+0x73/0x96 do_syscall_64+0x67/0x7a entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (sb_writers#10){.+.+}-{0:0}: validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b cachefiles_write+0x2b3/0x4bb netfs_rreq_do_write_to_cache+0x3b5/0x432 netfs_readpage+0x2de/0x39d filemap_read_page+0x51/0x94 filemap_get_pages+0x26f/0x413 filemap_read+0x182/0x427 new_sync_read+0xf0/0x161 vfs_read+0x118/0x16e ksys_read+0xb8/0x12e do_syscall_64+0x67/0x7a entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (mapping.invalidate_lock#3){.+.+}-{3:3}: check_noncircular+0xe4/0x129 check_prev_add+0x16b/0x3a4 validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b down_read+0x40/0x4a filemap_fault+0x276/0x7a5 __do_fault+0x96/0xbf do_fault+0x262/0x35a __handle_mm_fault+0x171/0x1b5 handle_mm_fault+0x12a/0x233 do_user_addr_fault+0x3d2/0x59c exc_page_fault+0x85/0xa5 asm_exc_page_fault+0x1e/0x30 other info that might help us debug this: Chain exists of: mapping.invalidate_lock#3 --> sb_writers#10 --> &mm->mmap_lock#2 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_lock#2); lock(sb_writers#10); lock(&mm->mmap_lock#2); lock(mapping.invalidate_lock#3); *** DEADLOCK *** 1 lock held by holetest/65517: #0: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c stack backtrace: CPU: 0 PID: 65517 Comm: holetest Not tainted 5.15.0-rc1-build2+ #292 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: dump_stack_lvl+0x45/0x59 check_noncircular+0xe4/0x129 ? print_circular_bug+0x207/0x207 ? validate_chain+0x461/0x4a8 ? add_chain_block+0x88/0xd9 ? hlist_add_head_rcu+0x49/0x53 check_prev_add+0x16b/0x3a4 validate_chain+0x3c4/0x4a8 ? check_prev_add+0x3a4/0x3a4 ? mark_lock+0xa5/0x1c6 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b ? filemap_fault+0x276/0x7a5 ? rcu_read_unlock+0x59/0x59 ? add_to_page_cache_lru+0x13c/0x13c ? lock_is_held_type+0x7b/0xd3 down_read+0x40/0x4a ? filemap_fault+0x276/0x7a5 filemap_fault+0x276/0x7a5 ? pagecache_get_page+0x2dd/0x2dd ? __lock_acquire+0x8bc/0x949 ? pte_offset_kernel.isra.0+0x6d/0xc3 __do_fault+0x96/0xbf ? do_fault+0x124/0x35a do_fault+0x262/0x35a ? handle_pte_fault+0x1c1/0x20d __handle_mm_fault+0x171/0x1b5 ? handle_pte_fault+0x20d/0x20d ? __lock_release+0x151/0x254 ? mark_held_locks+0x1f/0x78 ? rcu_read_unlock+0x3a/0x59 handle_mm_fault+0x12a/0x233 do_user_addr_fault+0x3d2/0x59c ? pgtable_bad+0x70/0x70 ? rcu_read_lock_bh_held+0xab/0xab exc_page_fault+0x85/0xa5 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x40192f Code: ff 48 89 c3 48 8b 05 50 28 00 00 48 85 ed 7e 23 31 d2 4b 8d 0c 2f eb 0a 0f 1f 00 48 8b 05 39 28 00 00 48 0f af c2 48 83 c2 01 <48> 89 1c 01 48 39 d5 7f e8 8b 0d f2 27 00 00 31 c0 85 c9 74 0e 8b RSP: 002b:00007f9931867eb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00007f9931868700 RCX: 00007f993206ac00 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00007ffc13e06ee0 RBP: 0000000000000100 R08: 0000000000000000 R09: 00007f9931868700 R10: 00007f99318689d0 R11: 0000000000000202 R12: 00007ffc13e06ee0 R13: 0000000000000c00 R14: 00007ffc13e06e00 R15: 00007f993206a000 Fixes: 726218fdc22c ("netfs: Define an interface to talk to a cache") Signed-off-by: David Howells <[email protected]> Tested-by: Jeff Layton <[email protected]> cc: Jan Kara <[email protected]> cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/163887597541.1596626.2668163316598972956.stgit@warthog.procyon.org.uk/ # v1
2021-12-07irqchip/apple-aic: Mark aic_init_smp() as __initDonghyeok Kim1-1/+1
This function is only called from the driver init code. Signed-off-by: Donghyeok Kim <[email protected]> Acked-by: Hector Martin <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-12-07can: m_can: pci: use custom bit timings for Elkhart LakeMatthias Schiffer1-4/+44
The relevant datasheet [1] specifies nonstandard limits for the bit timing parameters. While it is unclear what the exact effect of violating these limits is, it seems like a good idea to adhere to the documentation. [1] Intel Atom® x6000E Series, and Intel® Pentium® and Celeron® N and J Series Processors for IoT Applications Datasheet, Volume 2 (Book 3 of 3), July 2021, Revision 001 Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Link: https://lore.kernel.org/all/9eba5d7c05a48ead4024ffa6e5926f191d8c6b38.1636967198.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07can: m_can: make custom bittiming fields constMatthias Schiffer1-2/+2
The assigned timing structs will be defined a const anyway, so we can avoid a few casts by declaring the struct fields as const as well. Link: https://lore.kernel.org/all/4508fa4e639164b2584c49a065d90c78a91fa568.1636967198.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07Revert "can: m_can: remove support for custom bit timing"Matthias Schiffer2-6/+21
The timing limits specified by the Elkhart Lake CPU datasheets do not match the defaults. Let's reintroduce the support for custom bit timings. This reverts commit 0ddd83fbebbc5537f9d180d31f659db3564be708. Link: https://lore.kernel.org/all/00c9e2596b1a548906921a574d4ef7a03c0dace0.1636967198.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07can: m_can: pci: fix incorrect reference clock rateMatthias Schiffer1-1/+1
When testing the CAN controller on our Ekhart Lake hardware, we determined that all communication was running with twice the configured bitrate. Changing the reference clock rate from 100MHz to 200MHz fixed this. Intel's support has confirmed to us that 200MHz is indeed the correct clock rate. Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Link: https://lore.kernel.org/all/c9cf3995f45c363e432b3ae8eb1275e54f009fc8.1636967198.git.matthias.schiffer@ew.tq-group.com Cc: [email protected] Signed-off-by: Matthias Schiffer <[email protected]> Acked-by: Jarkko Nikula <[email protected]> Reviewed-by: Jarkko Nikula <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo()Matthias Schiffer1-2/+12
The same fix that was previously done in m_can_platform in commit 99d173fbe894 ("can: m_can: fix iomap_read_fifo() and iomap_write_fifo()") is required in m_can_pci as well to make iomap_read_fifo() and iomap_write_fifo() work for val_count > 1. Fixes: 812270e5445b ("can: m_can: Batch FIFO writes during CAN transmit") Fixes: 1aa6772f64b4 ("can: m_can: Batch FIFO reads during CAN receive") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Cc: Matt Kline <[email protected]> Signed-off-by: Matthias Schiffer <[email protected]> Tested-by: Jarkko Nikula <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07can: m_can: m_can_read_fifo: fix memory leak in error branchVincent Mailhol1-1/+3
In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Cc: Matt Kline <[email protected]> Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07can: m_can: Disable and ignore ELO interruptBrian Silverman1-8/+6
With the design of this driver, this condition is often triggered. However, the counter that this interrupt indicates an overflow is never read either, so overflowing is harmless. On my system, when a CAN bus starts flapping up and down, this locks up the whole system with lots of interrupts and printks. Specifically, this interrupt indicates the CEL field of ECR has overflowed. All reads of ECR mask out CEL. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Brian Silverman <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07can: sja1000: fix use after free in ems_pcmcia_add_card()Dan Carpenter1-1/+6
If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: [email protected] Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Oliver Hartkopp <[email protected]> Tested-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07can: pch_can: pch_can_rx_normal: fix use after freeVincent Mailhol1-1/+1
After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-12-07ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platformKailang Yang1-0/+40
Lenovo ALC897 platform had headset Mic. This patch enable supported headset Mic. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-12-06scsi: qla2xxx: Format log strings only if neededRoman Bolshakov1-0/+3
Commit 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs") introduced unconditional log string formatting to ql_dbg() even if ql_dbg_log event is disabled. It harms performance because some strings are formatted in fastpath and/or interrupt context. Link: https://lore.kernel.org/r/[email protected] Fixes: 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs") Cc: Rajan Shanmugavelu <[email protected]> Cc: [email protected] Signed-off-by: Roman Bolshakov <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-12-06scsi: scsi_debug: Fix buffer size of REPORT ZONES commandShin'ichiro Kawasaki1-1/+1
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH field of REPORT ZONES command is byte. However, current scsi_debug implementation handles it as number of zones to calculate buffer size to report zones. When the ALLOCATION LENGTH has a large number, this results in too large buffer size and causes memory allocation failure. Fix the failure by handling ALLOCATION LENGTH as byte unit. Link: https://lore.kernel.org/r/[email protected] Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands") Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-12-06scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issueManish Rangankar3-24/+17
When issued LUN reset under heavy I/O we hit the qedi WARN_ON because of a mismatch in firmware I/O cmd cleanup request count and I/O cmd cleanup response count received. The mismatch is because of a race caused by the postfix increment of cmd_cleanup_cmpl. [qedi_clearsq:1295]:18: fatal error, need hard reset, cid=0x0 WARNING: CPU: 48 PID: 110963 at drivers/scsi/qedi/qedi_fw.c:1296 qedi_clearsq+0xa5/0xd0 [qedi] CPU: 48 PID: 110963 Comm: kworker/u130:0 Kdump: loaded Tainted: G W Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 04/15/2020 Workqueue: iscsi_conn_cleanup iscsi_cleanup_conn_work_fn [scsi_transport_iscsi] RIP: 0010:qedi_clearsq+0xa5/0xd0 [qedi] RSP: 0018:ffffac2162c7fd98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff975213c40ab8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9761bf816858 RDI: ffff9761bf816858 RBP: ffff975247018628 R08: 000000000000522c R09: 000000000000005b R10: 0000000000000000 R11: ffffac2162c7fbd8 R12: ffff97522e1b2be8 R13: 0000000000000000 R14: ffff97522e1b2800 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9761bf800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1a34e3e1a0 CR3: 0000000108bb2000 CR4: 0000000000350ee0 Call Trace: qedi_ep_disconnect+0x533/0x550 [qedi] ? iscsi_dbg_trace+0x63/0x80 [scsi_transport_iscsi] ? _cond_resched+0x15/0x30 ? iscsi_suspend_queue+0x19/0x40 [libiscsi] iscsi_ep_disconnect+0xb0/0x130 [scsi_transport_iscsi] iscsi_cleanup_conn_work_fn+0x82/0x130 [scsi_transport_iscsi] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40 ---[ end trace 5f1441f59082235c ]--- Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Lee Duncan <[email protected]> Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Manish Rangankar <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-12-06perf bpf_skel: Do not use typedef to avoid error on old clangSong Liu3-20/+26
When building bpf_skel with clang-10, typedef causes confusions like: libbpf: map 'prev_readings': unexpected def kind var. Fix this by removing the typedef. Fixes: 7fac83aaf2eecc9e ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF") Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Song Liu <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06perf bpf: Fix building perf with BUILD_BPF_SKEL=1 by default in more distrosSong Liu3-5/+3
Arnaldo reported that building all his containers with BUILD_BPF_SKEL=1 to then make this the default he found problems in some distros where the system linux/bpf.h file was being used and lacked this: util/bpf_skel/bperf_leader.bpf.c:13:20: error: use of undeclared identifier 'BPF_F_PRESERVE_ELEMS' __uint(map_flags, BPF_F_PRESERVE_ELEMS); So use instead the vmlinux.h file generated by bpftool from BTF info. This fixed these as well, getting the build back working on debian:11, debian:experimental and ubuntu:21.10: In file included from In file included from util/bpf_skel/bperf_leader.bpf.cutil/bpf_skel/bpf_prog_profiler.bpf.c::33: : In file included from In file included from /usr/include/linux/bpf.h/usr/include/linux/bpf.h::1111: : /usr/include/linux/types.h/usr/include/linux/types.h::55::1010:: In file included from util/bpf_skel/bperf_follower.bpf.c:3fatal errorfatal error: : : In file included from /usr/include/linux/bpf.h:'asm/types.h' file not found11'asm/types.h' file not found: /usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found #include <asm/types.h>#include <asm/types.h> ^~~~~~~~~~~~~ ^~~~~~~~~~~~~ #include <asm/types.h> ^~~~~~~~~~~~~ 1 error generated. Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Song Liu <[email protected]> Tested-by: Athira Rajeev <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06perf header: Fix memory leaks when processing feature headersIan Rogers1-5/+10
These leaks were found with leak sanitizer running "perf pipe recording and injection test". In pipe mode feat_fd may hold onto an events struct that needs freeing. When string features are processed they may overwrite an already created string, so free this before the overwrite. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06perf test: Reset shadow counts before loadingIan Rogers1-0/+1
Otherwise load counting is an average. Without this change duration_time in test_memory_bandwidth will alter its value if an earlier test contains duration_time. This patch fixes an issue that's introduced in the proposed patch: https://lore.kernel.org/lkml/[email protected]/ in perf test "Parse and process metrics". Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06perf test: Fix 'Simple expression parser' test on arch without CPU die ↵Thomas Richter1-1/+3
topology info Some platforms do not have CPU die support, for example s390. Commit Cc: Ian Rogers <[email protected]> Fixes: fdf1e29b6118c18f ("perf expr: Add metric literals for topology.") fails on s390: # perf test -Fv 7 ... # FAILED tests/expr.c:173 #num_dies >= #num_packages ---- end ---- Simple expression parser: FAILED! # Investigating this issue leads to these functions: build_cpu_topology() +--> has_die_topology(void) { struct utsname uts; if (uname(&uts) < 0) return false; if (strncmp(uts.machine, "x86_64", 6)) return false; .... } which always returns false on s390. The caller build_cpu_topology() checks has_die_topology() return value. On false the the struct cpu_topology::die_cpu_list is not contructed and has zero entries. This leads to the failing comparison: #num_dies >= #num_packages. s390 of course has a positive number of packages. Fix this and check if the function build_cpu_topology() did build up a die_cpus_list. The number of entries in this list should be larger than 0. If the number of list element is zero, the die_cpus_list has not been created and the check in function test__expr(): TEST_ASSERT_VAL("#num_dies >= #num_packages", \ num_dies >= num_packages) always fails. Output after: # perf test -Fv 7 7: Simple expression parser : --- start --- division by zero syntax error ---- end ---- Simple expression parser: Ok # Fixes: fdf1e29b6118c18f ("perf expr: Add metric literals for topology.") Signed-off-by: Thomas Richter <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] [ Added comment in the added 'if (num_dies)' line about architectures not having die topology ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06tools build: Remove needless libpython-version feature check that breaks ↵Arnaldo Carvalho de Melo5-23/+0
test-all fast path Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use the tools/build/feature/test-libpython-version.c version in any Makefile feature check: $ find tools/ -type f | xargs grep feature-libpython-version $ The only place where this was used was removed in 66dfdff03d196e51: - ifneq ($(feature-libpython-version), 1) - $(warning Python 3 is not yet supported; please set) - $(warning PYTHON and/or PYTHON_CONFIG appropriately.) - $(warning If you also have Python 2 installed, then) - $(warning try something like:) - $(warning $(and ,)) - $(warning $(and ,) make PYTHON=python2) - $(warning $(and ,)) - $(warning Otherwise, disable Python support entirely:) - $(warning $(and ,)) - $(warning $(and ,) make NO_LIBPYTHON=1) - $(warning $(and ,)) - $(error $(and ,)) - else - LDFLAGS += $(PYTHON_EMBED_LDFLAGS) - EXTLIBS += $(PYTHON_EMBED_LIBADD) - LANG_BINDINGS += $(obj-perf)python/perf.so - $(call detected,CONFIG_LIBPYTHON) - endif And nowadays we either build with PYTHON=python3 or just install the python3 devel packages and perf will build against it. But the leftover feature-libpython-version check made the fast path feature detection to break in all cases except when python2 devel files were installed: $ rpm -qa | grep python.*devel python3-devel-3.9.7-1.fc34.x86_64 $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000) $ As python3 is the norm these days, fix this by just removing the unused feature-libpython-version feature check, making the test-all fast path to work with the common case. With this: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin |& head make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000) $ cat /tmp/build/perf/feature/test-all.make.output $ Reviewed-by: James Clark <[email protected]> Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support") Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jaroslav Škarvada <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06perf tools: Fix SMT detection fast read pathIan Rogers1-1/+1
sysfs__read_int() returns 0 on success, and so the fast read path was always failing. Fixes: bb629484d924118e ("perf tools: Simplify checking if SMT is active.") Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Konstantin Khlebnikov <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06tools headers UAPI: Sync powerpc syscall table file changed by new ↵Arnaldo Carvalho de Melo1-0/+1
futex_waitv syscall To pick the changes in this cset: a0eb2da92b715d0c ("futex: Wireup futex_waitv syscall") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible (adapted from the x86_64 test output): # perf trace -e futex_waitv ^C# # perf trace -v -e futex_waitv event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449) ^C# # perf trace -v -e futex* --max-events 10 event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 221 || id == 449) mmap size 528384B ? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out) 0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0 0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... 0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0 0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... # That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ grep futex tools/perf/arch/powerpc/entry/syscalls/syscall.tbl 221 32 futex sys_futex_time32 221 64 futex sys_futex 221 spu futex sys_futex 422 32 futex_time64 sys_futex sys_futex 449 common futex_waitv sys_futex_waitv $ This addresses this perf build warnings: Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl Reviewed-by: Athira Rajeev <[email protected]> Tested-by: Athira Rajeev <[email protected]> Cc: Adrian Hunter <[email protected]>, Cc: André Almeida <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/YZ%[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06perf inject: Fix itrace space allowed for new attributesAdrian Hunter1-1/+1
The space allowed for new attributes can be too small if existing header information is large. That can happen, for example, if there are very many CPUs, due to having an event ID per CPU per event being stored in the header information. Fix by adding the existing header.data_offset. Also increase the extra space allowed to 8KiB and align to a 4KiB boundary for neatness. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06tools headers UAPI: Sync s390 syscall table file changed by new futex_waitv ↵Arnaldo Carvalho de Melo1-0/+1
syscall To pick the changes in these csets: 6c122360cf2f4c5a ("s390: wire up sys_futex_waitv system call") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible (adapted from the x86_64 test output): # perf trace -e futex_waitv ^C# # perf trace -v -e futex_waitv event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449) ^C# # perf trace -v -e futex* --max-events 10 event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 238 || id == 449) ? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out) 0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0 0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... 0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0 0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... # That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ grep futex tools/perf/arch/s390/entry/syscalls/syscall.tbl 238 common futex sys_futex sys_futex_time32 422 32 futex_time64 - sys_futex 449 common futex_waitv sys_futex_waitv sys_futex_waitv $ This addresses this perf build warnings: Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl Acked-by: Heiko Carstens <[email protected]> Cc: Adrian Hunter <[email protected]>, Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: https://lore.kernel.org/lkml/YZ%2F2qRW%[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06Revert "perf bench: Fix two memory leaks detected with ASan"Jiri Olsa1-4/+0
This: This reverts commit 92723ea0f11d92496687db8c9725248e9d1e5e1d. # perf test 91 91: perf stat --bpf-counters test :RRRRRRRRRRRRR FAILED! # perf test 91 91: perf stat --bpf-counters test :RRRRRRRRRRRRR FAILED! # perf test 91 91: perf stat --bpf-counters test :RRRRRRRRRRRR FAILED! # perf test 91 91: perf stat --bpf-counters test :RRRRRRRRRRRRRRRRRR Ok # perf test 91 91: perf stat --bpf-counters test :RRRRRRRRR FAILED! # perf test 91 91: perf stat --bpf-counters test :RRRRRRRRRRR Ok # perf test 91 91: perf stat --bpf-counters test :RRRRRRRRRRRRRRR Ok yep, it seems the perf bench is broken so the counts won't correlated if I revert this one: 92723ea0f11d perf bench: Fix two memory leaks detected with ASan it works for me again.. it seems to break -t option [root@dell-r440-01 perf]# ./perf bench sched messaging -g 1 -l 100 -t # Running 'sched/messaging' benchmark: RRRperf: CLIENT: ready write: Bad file descriptor Rperf: SENDER: write: Bad file descriptor Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Sohaib Mohamed <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/lkml/YZev7KClb%2Fud43Lc@krava/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-12-06devlink: fix netns refcount leak in devlink_nl_cmd_reload()Eric Dumazet1-8/+8
While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload() Some error paths forgot to release a refcount on a netns. To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload(). Fixes: ccdf07219da6 ("devlink: Add reload action option to devlink reload command") Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option") Signed-off-by: Eric Dumazet <[email protected]> Cc: Moshe Shemesh <[email protected]> Cc: Jacob Keller <[email protected]> Cc: Jiri Pirko <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-06ethtool: do not perform operations on net devices being unregisteredAntoine Tenart1-1/+2
There is a short period between a net device starts to be unregistered and when it is actually gone. In that time frame ethtool operations could still be performed, which might end up in unwanted or undefined behaviours[1]. Do not allow ethtool operations after a net device starts its unregistration. This patch targets the netlink part as the ioctl one isn't affected: the reference to the net device is taken and the operation is executed within an rtnl lock section and the net device won't be found after unregister. [1] For example adding Tx queues after unregister ends up in NULL pointer exceptions and UaFs, such as: BUG: KASAN: use-after-free in kobject_get+0x14/0x90 Read of size 1 at addr ffff88801961248c by task ethtool/755 CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014 Call Trace: dump_stack_lvl+0x57/0x72 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b kobject_get+0x14/0x90 kobject_add_internal+0x3d1/0x450 kobject_init_and_add+0xba/0xf0 netdev_queue_update_kobjects+0xcf/0x200 netif_set_real_num_tx_queues+0xb4/0x310 veth_set_channels+0x1c3/0x550 ethnl_set_channels+0x524/0x610 Fixes: 041b1c5d4a53 ("ethtool: helper functions for netlink interface") Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-06Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGHSalvatore Bonaccorso1-1/+1
Andreas reported that a specific build environment for an external module, being a bit broken, does pass CC_IMPLICIT_FALLTHROUGH quoted as argument to gcc, causing an error gcc-11: error: "-Wimplicit-fallthrough=5": linker input file not found: No such file or directory Until this is more generally fixed as outlined in [1], by fixing scripts/link-vmlinux.sh, scripts/gen_autoksyms.sh, etc to not directly include the include/config/auto.conf, and in a second step, change Kconfig to generate the auto.conf without "", workaround the issue by explicitly unquoting CC_IMPLICIT_FALLTHROUGH. Reported-by: Andreas Beckmann <[email protected]> Link: https://bugs.debian.org/1001083 Link: https://lore.kernel.org/linux-kbuild/CAK7LNAR-VXwHFEJqCcrFDZj+_4+Xd6oynbj_0eS8N504_ydmyw@mail.gmail.com/ [1] Signed-off-by: Salvatore Bonaccorso <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-12-06clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1Martin Botka1-2/+2
Without this change eMMC runs at overclocked freq. Swap the ops to not OC the eMMC. Signed-off-by: Martin Botka <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bjorn Andersson <[email protected]> Fixes: 4b8d6ae57cdf ("clk: qcom: Add SM6125 (TRINKET) GCC driver") Signed-off-by: Stephen Boyd <[email protected]>
2021-12-06platform/x86/intel: hid: add quirk to support Surface Go 3Alex Hung1-0/+7
Similar to other systems Surface Go 3 requires a DMI quirk to enable 5 button array for power and volume buttons. Buglink: https://github.com/linux-surface/linux-surface/issues/595 Cc: [email protected] Signed-off-by: Alex Hung <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-12-06dt-bindings: bq25980: Fixup the exampleThierry Reding1-1/+1
Use the ti,watchdog-timeout-ms property instead of the unsupported ti,watchdog-timer property to make the example validate correctly. Signed-off-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2021-12-06dt-bindings: input: gpio-keys: Fix interrupts in exampleGeert Uytterhoeven1-1/+1
The "interrupts" property in the example looks weird: - The type is not in the last cell, - Level interrupts don't work well with gpio-keys, as they keep the interrupt asserted as long as the key is pressed, causing an interrupt storm. Use a more realistic falling-edge interrupt instead. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/47ecd2d8efcf09f8ab47de87a7bcfafc82208776.1638538079.git.geert+renesas@glider.be Signed-off-by: Rob Herring <[email protected]>
2021-12-06dt-bindings: net: Reintroduce PHY no lane swap bindingAlexander Stein1-0/+8
This binding was already documented in phy.txt, commit 252ae5330daa ("Documentation: devicetree: Add PHY no lane swap binding"), but got accidently removed during YAML conversion in commit d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options"). Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are not identical, as the former one disable this feature, while the latter one doesn't change anything. Fixes: d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options") Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2021-12-06Merge tag 'docs-5.16-3' of git://git.lwn.net/linuxLinus Torvalds5-13/+25
Pull documentation fixes from Jonathan Corbet: "A few important documentation fixes, including breakage that comes with v1.0 of the ReadTheDocs theme" * tag 'docs-5.16-3' of git://git.lwn.net/linux: Documentation: Add minimum pahole version Documentation/process: fix self reference docs: admin-guide/blockdev: Remove digraph of node-states docs: conf.py: fix support for Readthedocs v 1.0.0
2021-12-06Merge tag 'spi-fix-v5.16-rc4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "Just one trivial update adding a device ID to the DT bindings" * tag 'spi-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-rockchip: Add rk3568-spi compatible
2021-12-06Merge tag 'regulator-fix-v5.16-rc4' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Documentation fix for v5.17. A fix for bitrot in the documentation for protection interrupts that crept in as the code was revised during review" * tag 'regulator-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Update protection IRQ helper docs
2021-12-06Merge tag 'efi-urgent-for-v5.16' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fix from Ard Biesheuvel: "Ensure that the EFI memory map resides in encrypted memory even after it has been reallocated" * tag 'efi-urgent-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/sme: Explicitly map new EFI memmap table as encrypted
2021-12-06io-wq: remove spurious bit clear on task_work additionJens Axboe1-3/+1
There's a small race here where the task_work could finish and drop the worker itself, so that by the time that task_work_add() returns with a successful addition we've already put the worker. The worker callbacks clear this bit themselves, so we don't actually need to manually clear it in the caller. Get rid of it. Reported-by: [email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-12-06percpu: km: ensure it is used with NOMMU (either UP or SMP)Vladimir Murzin1-1/+1
Currently, NOMMU pull km allocator via !SMP dependency because most of them are UP, yet for SMP+NOMMU vm allocator gets pulled which: * may lead to broken build [1] * ...or not working runtime due to [2] It looks like SMP+NOMMU case was overlooked in bbddff054587 ("percpu: use percpu allocator on UP too") so restore that. [1] For ARM SMP+NOMMU (R-class cores) arm-none-linux-gnueabihf-ld: mm/percpu.o: in function `pcpu_post_unmap_tlb_flush': mm/percpu-vm.c:188: undefined reference to `flush_tlb_kernel_range' [2] static inline int vmap_pages_range_noflush(unsigned long addr, unsigned long end, pgprot_t prot, struct page **pages, unsigned int page_shift) { return -EINVAL; } Signed-off-by: Vladimir Murzin <[email protected]> Tested-by: Rob Landley <[email protected]> Tested-by: Rich Felker <[email protected]> [Dennis: use depends instead of default for condition] Signed-off-by: Dennis Zhou <[email protected]>
2021-12-06i40e: Fix NULL pointer dereference in i40e_dbg_dump_descNorbert Zulinski1-0/+8
When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors. Fixes: 02e9c290814c ("i40e: debugfs interface") Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Norbert Zulinski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-06i40e: Fix pre-set max number of queues for VFMateusz Palczewski1-5/+0
After setting pre-set combined to 16 queues and reserving 16 queues by tc qdisc, pre-set maximum combined queues returned to default value after VF reset being 4 and this generated errors during removing tc. Fixed by removing clear num_req_queues before reset VF. Fixes: e284fc280473 (i40e: Add and delete cloud filter) Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Bindushree P <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.