Age | Commit message (Collapse) | Author | Files | Lines |
|
Seems more reliable. Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=26552
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Dave Airlie <[email protected]>
|
|
Some fixes to the thermal sensor code:
- handle negative numbers
- properly handle temp calculation on different asics
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
into drm-fixes
* 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next:
drm/nv50: fix display on 0x50
drm/nouveau: correctly pair hwmon_init and hwmon_fini
|
|
* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
drm/i915: Only bind to function 0 of the PCI device
drm/i915: Suppress spurious vblank interrupts
drm: Avoid leak of adjusted mode along quick set_mode paths
drm: Simplify and defend later checks when disabling a crtc
drm: Don't switch fb when disabling an output
drm/i915: Reset crtc after resume
drm/i915/crt: Force the initial probe after reset
drm/i915: Reset state after a GPU reset or resume
drm: Add an interface to reset the device
drm/i915/sdvo: If at first we don't succeed in reading the response, wait
|
|
Accidently busted a while back. We'll be creating objects that aren't
necessary here, but, they're never used so no harm..
Signed-off-by: Ben Skeggs <[email protected]>
|
|
I broke this with my commit
07cfe0e7a820ecad078c04e9c2a102521709145d
This fixes fdo #33434
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
|
|
length at this point is the length returned by the last kernel_recvmsg
call. total_read is the length of all of the data read so far. length
is more or less meaningless at this point, so use total_read for
everything.
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
This patch fixes a wrongly used lcd enable pin.
The Devkit8000 uses twl4030_ledA configured as output gpio only for
the lcd enable line. twl4030_gpio.1 is used through the generic
gpio functions while ledA is used via low level twl4030 calls.
This patch removes the low level calls and use the generic gpio functions
for initialization and use of ledA. This patch also fixes a bug where the
lcd would not power down when blanking.
Further this patch fixes an indentation issue. The comment line uses
eight whitespace and is replaced with a hard tab.
gpio_request + gpio_direction_output are replaced with gpio_request_one.
The return value of gpio_request_one is used to set the value of the
gpio to -EINVAL when unsuccessful, so that gpio_is_valid can detect the
unsuccessful request. But already successful requested gpios are not freed.
Reported-by: Daniel Morsing <[email protected]>
Signed-off-by: Thomas Weber <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
Remove duplicated #include('s) in
arch/arm/mach-omap1/time.c
Signed-off-by: Huang Weiyi <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
Free allocated memory on error exit.
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the commit 757902513019e6ee469791ff76f954b19ca8d036 (regulator:
Factor out voltage set operation into a separate function) fixed voltage
regulator setup will fail if there are voltage constraints defined. This
made MMC unusable on this board. Fix by just deleting those redundant
constraints.
Signed-off-by: Aaro Koskinen <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
[[email protected]: updated comments]
Signed-off-by: Tony Lindgren <[email protected]>
|
|
It is illegal to call netif_stop_queue before register_netdev.
Signed-off-by: Ajit Khaparde <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
While running insmod/rmood in a loop, an unnecessary netif_stop_queue
causes the system to crash. Remove the netif_stop_queue call
and netif_start_queue in the link status update path.
Signed-off-by: Ajit Khaparde <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix ASM optimized code for LE
microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1
microblaze: Fix DTB passing from bootloader
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix length checks in checkSMB
[CIFS] Update cifs minor version
cifs: No need to check crypto blockcipher allocation
cifs: clean up some compiler warnings
cifs: make CIFS depend on CRYPTO_MD4
cifs: force a reconnect if there are too many MIDs in flight
cifs: don't pop a printk when sending on a socket is interrupted
cifs: simplify SMB header check routine
cifs: send an NT_CANCEL request when a process is signalled
cifs: handle cancelled requests better
cifs: fix two compiler warning about uninitialized vars
|
|
As Tao Ma noticed, change 5ecfda0 breaks blktrace. This is because
blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ,
so my attempt to not unnecessarity break COW during mlock ended up
causing mlock to fail with a permission problem.
I am proposing to let mlock ignore vma protection in all cases except
PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions
(as in the blktrace case, which broke at 5ecfda0) or for PROT_EXEC
regions (which seem to me like they were always broken).
Signed-off-by: Michel Lespinasse <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The comments under "config STUB_POULSBO" are close to correct,
but they are not being followed. This patch updates them to reflect
the requirements for THERMAL.
This build error is caused by STUB_POULSBO selecting ACPI_VIDEO
when ACPI_VIDEO's config requirements are not met.
ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined!
ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined!
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This warning was reported by cppcheck:
drivers/isdn/icn/icn.c:1641: error: Dangerous usage of 'rev' (strncpy doesn't always 0-terminate it)
If strncpy copied 20 bytes, the destination string rev was not terminated.
The patch adds one more byte to rev and makes sure that this byte is
always 0.
Cc: Karsten Keil <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stefan Weil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The chip was erroneously configured to accept all multicast frames
in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings
when in an NPAR mode. This caused packet duplication for every received multicast
frame in this mode.
Signed-off-by: Vladislav Zolotarov <[email protected]>
Signed-off-by: Eilon Greenstein <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Early chipsets (gen2/3) used function 1 as a placeholder for multi-head.
We used to ignore these since they were not assigned to
PCI_CLASS_DISPLAY_VGA. However with 934f992c7 we attempt to bind to all
Intel PCI_CLASS_DISPLAY devices (and functions) to work in multi-gpu
systems. This fails hard on gen2/3.
Reported-by: Ferenc Wágner <[email protected]>
Tested-by: Ferenc Wágner <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28012
Signed-off-by: Chris Wilson <[email protected]>
Cc: [email protected]
|
|
Replace the rather weird use of ++ with + 1 as the value is being assigned
Signed-off-by: Alan Cox <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
|
|
This error is reported by cppcheck:
drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead?
It looks like cppcheck is correct, so fix this. No test was run.
Cc: Ramkrishna Vepa <[email protected]>
Cc: Sivakumar Subramani <[email protected]>
Cc: Sreenivasa Honnur <[email protected]>
Cc: Jon Mason <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Stefan Weil <[email protected]>
Acked-by: Ram Vepa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
free the skb's when the Tx of PAPRD frames fails and also add a debug
message indicating that.
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
|
|
For the following rule:
iptables -I PREROUTING -t raw -j CT --ctevents assured
The event delivered looks like the following:
[UPDATE] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]
Note that the TCP protocol state is not included. For that reason
the CT event filtering is not very useful for conntrackd.
To resolve this issue, instead of conditionally setting the CT events
bits based on the ctmask, we always set them and perform the filtering
in the late stage, just before the delivery.
Thus, the event delivered looks like the following:
[UPDATE] tcp 6 432000 ESTABLISHED src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>
|
|
In 135367b "netfilter: xtables: change xt_target.checkentry return type",
the type returned by checkentry was changed from boolean to int, but the
return values where not adjusted.
arptables: Input/output error
This broke arptables with the mangle target since it returns true
under success, which is interpreted by xtables as >0, thus
returning EIO.
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Patrick McHardy <[email protected]>
|
|
When built with rcu checks enabled, vhost triggers
bogus warnings as vhost features are read without
dev->mutex sometimes, and private pointer is read
with our kind of rcu where work serves as a
read side critical section.
Fixing it properly is not trivial.
Disable the warnings by stubbing out the checks for now.
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
The CX20442 codec driver never provided the snd_soc_codec_driver's
.reg_cache_default member. With the latest ASoC framework changes, it
seems to be referred unconditionally, resulting in a NULL pointer
dereference if missing. Provide it.
Created and tested on Amstrad Delta against linux-2.6.38-rc2
Signed-off-by: Janusz Krzysztofik <[email protected]>
Acked-by: Liam Girdwood <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
The Amstrad Delta ASoC driver used to override the digital_mute()
callback, expected to be not provided by the on-board CX20442 CODEC
driver, with its own implementation. While this is still posssible when
substituting the whole empty snd_soc_dai_driver.ops member (the CX20442
case), replacing snd_soc_dai_ops.digital_mute only is no longer correct
after the snd_soc_dai_driver.ops member has been constified, and results
in build error.
Drop this actually not used code path in hope the CX20442 driver never
provides its own snd_soc_dai_ops structure.
Created and tested against linux-2.6.38-rc2
Signed-off-by: Janusz Krzysztofik <[email protected]>
Acked-by: Liam Girdwood <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
The error check of btrfs_start_transaction() is added, and the mistake
of the error check on several places is corrected.
Signed-off-by: Tsutomu Itoh <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
Because NULL is returned when the memory allocation fails,
it is checked whether it is NULL.
Signed-off-by: Tsutomu Itoh <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
Commit b2878fa (ARM: mx28: update clock and device name for dual fec
support) added only the new lookups without removing the old one.
Cc: Shawn Guo <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Signed-off-by: Sascha Hauer <[email protected]>
|
|
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sascha Hauer <[email protected]>
|
|
Version 15 of schedstats was introduced in:
67aa0f767af4: sched: remove unused fields from struct rq
and removed three unused counters in sched_yield(). Update
the documentation.
Signed-off-by: Javi Merino <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Peter Zijlstra <[email protected]>
Cc: Mike Galbraith <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This error was reported by cppcheck:
drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer.
The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes.
I just fixed the code, but did not run any tests.
Signed-off-by: Stefan Weil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In my testing of 2.6.37 I was occassionally getting a warning about
sysctl table entries being unregistered in the wrong order. Digging
in it turns out this dates back to the last great sysctl reorg done
where Al Viro introduced the requirement that sysctl directories
needed to be created before and destroyed after the files in them.
It turns out that in that great reorg /proc/sys/net/ipv6/neigh was
overlooked. So this patch fixes that oversight and makes an annoying
warning message go away.
>------------[ cut here ]------------
>WARNING: at kernel/sysctl.c:1992 unregister_sysctl_table+0x134/0x164()
>Pid: 23951, comm: kworker/u:3 Not tainted 2.6.37-350888.2010AroraKernelBeta.fc14.x86_64 #1
>Call Trace:
> [<ffffffff8103e034>] warn_slowpath_common+0x80/0x98
> [<ffffffff8103e061>] warn_slowpath_null+0x15/0x17
> [<ffffffff810452f8>] unregister_sysctl_table+0x134/0x164
> [<ffffffff810e7834>] ? kfree+0xc4/0xd1
> [<ffffffff813439b2>] neigh_sysctl_unregister+0x22/0x3a
> [<ffffffffa02cd14e>] addrconf_ifdown+0x33f/0x37b [ipv6]
> [<ffffffff81331ec2>] ? skb_dequeue+0x5f/0x6b
> [<ffffffffa02ce4a5>] addrconf_notify+0x69b/0x75c [ipv6]
> [<ffffffffa02eb953>] ? ip6mr_device_event+0x98/0xa9 [ipv6]
> [<ffffffff813d2413>] notifier_call_chain+0x32/0x5e
> [<ffffffff8105bdea>] raw_notifier_call_chain+0xf/0x11
> [<ffffffff8133cdac>] call_netdevice_notifiers+0x45/0x4a
> [<ffffffff8133d2b0>] rollback_registered_many+0x118/0x201
> [<ffffffff8133d3af>] unregister_netdevice_many+0x16/0x6d
> [<ffffffff8133d571>] default_device_exit_batch+0xa4/0xb8
> [<ffffffff81337c42>] ? cleanup_net+0x0/0x194
> [<ffffffff81337a2a>] ops_exit_list+0x4e/0x56
> [<ffffffff81337d36>] cleanup_net+0xf4/0x194
> [<ffffffff81053318>] process_one_work+0x187/0x280
> [<ffffffff8105441b>] worker_thread+0xff/0x19f
> [<ffffffff8105431c>] ? worker_thread+0x0/0x19f
> [<ffffffff8105776d>] kthread+0x7d/0x85
> [<ffffffff81003824>] kernel_thread_helper+0x4/0x10
> [<ffffffff810576f0>] ? kthread+0x0/0x85
> [<ffffffff81003820>] ? kernel_thread_helper+0x0/0x10
>---[ end trace 8a7e9310b35e9486 ]---
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
axnet_cs:
mdelay of 10ms is too long at ei_rx_overrun.
It should be reduced to 2ms.
Signed-off-by: Ken Kawasaki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
This one isn't really an uninit variable, but for pretty
obscure reasons. Let's make it clearly correct.
Signed-off-by: Chris Mason <[email protected]>
|
|
In get_rps_cpu, add check that the rps_flow_table for the device is
NULL when trying to take fast path when RPS map length is one.
Without this, RFS is effectively disabled if map length is one which
is not correct.
Signed-off-by: Tom Herbert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: NFSv4 readdir loses entries
NFS: Micro-optimize nfs4_decode_dirent()
NFS: Fix an NFS client lockdep issue
NFS construct consistent co_ownerid for v4.1
NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
NFS improve pnfs_put_deviceid_cache debug print
NFS fix cb_sequence error processing
NFS do not find client in NFSv4 pg_authenticate
NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
NFS: Prevent memory allocation failure in nfsacl_encode()
NFS: nfsacl_{encode,decode} should return signed integer
NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"
NFS: Fix "kernel BUG at fs/aio.c:554!"
NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().
NFS: fix handling of malloc failure during nfs_flush_multi()
|
|
The cERROR message in checkSMB when the calculated length doesn't match
the RFC1001 length is incorrect in many cases. It always says that the
RFC1001 length is bigger than the SMB, even when it's actually the
reverse.
Fix the error message to say the reverse of what it does now when the
SMB length goes beyond the end of the received data. Also, clarify the
error message when the RFC length is too big. Finally, clarify the
comments to show that the 512 byte limit on extra data at the end of
the packet is arbitrary.
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: smp_on_up: allow non-ARM SMP processors
ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
ARM: initrd: disable initrd if passed address overlaps reserved region
ARM: footbridge: fix debug macros
ARM: mmci: round down the bytes transferred on error
ARM: mmci: complete the transaction on error
ARM: 6642/1: mmci: calculate remaining bytes at error correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
arm: omap2: mux: fix compile warning
omap1: Simplify use of omap_irq_flags
omap2+: Fix unused variable warning for omap_irq_base
|
|
Fix kernel-doc warning in kernel.h from commit 7ef88ad56145
("BUILD_BUG_ON: make it handle more cases"):
Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: xfs_bmap_add_extent_delay_real should init br_startblock
xfs: fix dquot shaker deadlock
xfs: handle CIl transaction commit failures correctly
xfs: limit extsize to size of AGs and/or MAXEXTLEN
xfs: prevent extsize alignment from exceeding maximum extent size
xfs: limit extent length for allocation to AG size
xfs: speculative delayed allocation uses rounddown_power_of_2 badly
xfs: fix efi item leak on forced shutdown
xfs: fix log ticket leak on forced shutdown.
|
|
Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
usb: gadget: composite: avoid access beyond array max length
USB: serial: handle Data Carrier Detect changes
USB: gadget: Fix endpoint representation in ci13xxx_udc
USB: gadget: Fix error path in ci13xxx_udc gadget probe function
usb: pch_udc: Fix the worning log issue at gadget driver remove
USB: serial: Updated support for ICOM devices
USB: ehci-mxc: add work-around for efika mx/sb bug
USB: unbreak ehci-mxc on otg port of i.MX27
drivers: update to pl2303 usb-serial to support Motorola cables
USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
USB serial: add missing .usb_driver field in serial drivers
USB: ehci-fsl: Fix 'have_sysif_regs' detection
USB: g_printer: fix bug in module parameter definitions
USB: g_printer: fix bug in unregistration
USB: uss720: remove duplicate USB device
MAINTAINERS: add ueagle-atm entry
USB: EHCI: fix DMA deallocation bug
USB: pch_udc: support new device ML7213 IOH
usb: pch_udc: Fixed issue which does not work with g_serial
usb: set ep_dev async suspend should be later than device_initialize
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
staging: r8712u: Add new device IDs
staging: brcm80211: fix suspend/resume issue in brcmsmac
staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
Staging: iio: Aditional fixpoint formatted output bugfix
staging: usbip: vhci: use urb->dev->portnum to find port
staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
staging: usbip: vhci: friendly log messages for connection errors
staging: usbip: vhci: refuse to enqueue for dead connections
staging: usbip: vhci: give back URBs from in-flight unlink requests
staging: usbip: vhci: update reference count for usb_device
staging: usbip: stub: update refcounts for devices and interfaces
staging: tidspbridge: replace mbox callback with notifier_call
staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
Staging: speakup: &&/|| confusion in silent_store()
iio: Fixpoint formatted output bugfix
staging: rt2860: Fix incorrect netif_stop_queue usage warning
staging: r8712u: Fix memory leak in firmware loading
staging: tidspbridge: configure full L1 MMU range
staging: rt2870sta: Add ID for Linksys WUSB100v2
Staging: xgfib: put parenthesis in the right place
...
|