aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-23ionic: catch no ptp support earlierShannon Nelson2-8/+9
If PTP configuration is attempted on ports that don't support it, such as VF ports, the driver will return an error status -95, or EOPNOSUPP and print an error message enp98s0: hwstamp set failed: -95 Because some daemons can retry every few seconds, this can end up filling the dmesg log and pushing out other more useful messages. We can catch this issue earlier in our handling and return the error without a log message. Fixes: 829600ce5e4e ("ionic: add ts_config replay") Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23ionic: make all rx_mode work threadsafeShannon Nelson2-102/+85
Move the bulk of the code from ionic_set_rx_mode(), which can be called from atomic context, into ionic_lif_rx_mode() which is a safe context. A call from the stack will get pushed off into a work thread, but it is also possible to simultaneously have a call driven by a queue reconfig request from an ethtool command or fw recovery event. We add a mutex around the rx_mode work to be sure they don't collide. Fixes: 81dbc24147f9 ("ionic: change set_rx_mode from_ndo to can_sleep") Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23Merge branch '40GbE' of ↵David S. Miller4-25/+94
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-07-23 This series contains updates to i40e driver only. Arkadiusz corrects the order of calls for disabling queues to resolve a false error message and adds a better message to the user when transitioning FW LLDP back on while the firmware is still processing the off request. Lukasz adds additional information regarding possible incorrect cable use when a PHY type error occurs. Jedrzej adds ndo_select_queue support to resolve incorrect queue selection when SW DCB is used and adds a warning when there are not enough queues for desired TC configuration. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-07-23Merge tag 'mac80211-for-net-2021-07-23' of ↵David S. Miller8-53/+95
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Couple of fixes: * fix aggregation on mesh * fix late enabling of 4-addr mode * leave monitor SKBs with some headroom * limit band information for old applications * fix virt-wifi WARN_ON * fix memory leak in cfg80211 BSS list maintenance
2021-07-23NIU: fix incorrect error return, missed in previous revertPaul Jakma1-1/+2
Commit 7930742d6, reverting 26fd962, missed out on reverting an incorrect change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears to be a normal path - treating it as an error and return -EINVAL was breaking VPD_SCAN and causing the driver to fail to load. Fix, so my Neptune card works again. Cc: Kangjie Lu <[email protected]> Cc: Shannon Nelson <[email protected]> Cc: David S. Miller <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: stable <[email protected]> Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"') Signed-off-by: Paul Jakma <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23net: qrtr: fix memory leaksPavel Skripkin1-1/+5
Syzbot reported memory leak in qrtr. The problem was in unputted struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup() which takes sock reference if port was found. Then there is the following check: if (!ipc || &ipc->sk == skb->sk) { ... return -ENODEV; } Since we should drop the reference before returning from this function and ipc can be non-NULL inside this if, we should add qrtr_port_put() inside this if. The similar corner case is in qrtr_endpoint_post() as Manivannan reported. In case of sock_queue_rcv_skb() failure we need to put port reference to avoid leaking struct sock pointer. Fixes: e04df98adf7d ("net: qrtr: Remove receive worker") Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Reported-and-tested-by: [email protected] Signed-off-by: Pavel Skripkin <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller6-10/+41
Pablo Neira Ayusosays: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Memleak in commit audit error path, from Dongliang Mu. 2) Avoid possible false sharing for flowtable timeout updates and nft_last use. 3) Adjust conntrack timestamp due to garbage collection delay, from Florian Westphal. 4) Fix nft_nat without layer 3 address for the inet family. 5) Fix compilation warning in nfnl_hook when ingress support is disabled, from Arnd Bergmann. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-07-23octeontx2-af: Fix uninitialized variables in rvu_switchSubbaraya Sundeep2-7/+10
Get the number of VFs of a PF correctly by calling rvu_get_pf_numvfs in rvu_switch_disable function. Also hwvf is not required hence remove it. Fixes: 23109f8dd06d ("octeontx2-af: Introduce internal packet switching") Reported-by: kernel test robot <[email protected]> Reported-by: Colin Ian King <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23wwan: core: Fix missing RTM_NEWLINK event for default linkLoic Poulain1-0/+2
A wwan link created via the wwan_create_default_link procedure is never notified to the user (RTM_NEWLINK), causing issues with user tools relying on such event to track network links (NetworkManager). This is because the procedure misses a call to rtnl_configure_link(), which sets the link as initialized and notifies the new link (cf proper usage in __rtnl_newlink()). Cc: [email protected] Fixes: ca374290aaad ("wwan: core: support default netdev creation") Suggested-by: Sergey Ryazanov <[email protected]> Signed-off-by: Loic Poulain <[email protected]> Acked-by: Sergey Ryazanov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23net: dsa: mv88e6xxx: silently accept the deletion of VID 0 tooVladimir Oltean1-1/+1
The blamed commit modified the driver to accept the addition of VID 0 without doing anything, but deleting that VID still fails: [ 32.080780] mv88e6085 d0032004.mdio-mii:10 lan8: failed to kill vid 0081/0 Modify mv88e6xxx_port_vlan_leave() to do the same thing as the addition. Fixes: b8b79c414eca ("net: dsa: mv88e6xxx: Fix adding vlan 0") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23ipv6: decrease hop limit counter in ip6_forward()Kangmin Park1-2/+3
Decrease hop limit counter when deliver skb to ndp proxy. Signed-off-by: Kangmin Park <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23net: Set true network header for ECN decapsulationGilad Naaman1-1/+1
In cases where the header straight after the tunnel header was another ethernet header (TEB), instead of the network header, the ECN decapsulation code would treat the ethernet header as if it was an IP header, resulting in mishandling and possible wrong drops or corruption of the IP header. In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the inner IPv4 header, and correct its checksum. The offset of the ECT bits in an IPv4 header corresponds to the lower 2 bits of the second octet of the destination MAC address in the ethernet header. The IPv4 checksum corresponds to end of the source address. In order to reproduce: $ ip netns add A $ ip netns add B $ ip -n A link add _v0 type veth peer name _v1 netns B $ ip -n A link set _v0 up $ ip -n A addr add dev _v0 10.254.3.1/24 $ ip -n A route add default dev _v0 scope global $ ip -n B link set _v1 up $ ip -n B addr add dev _v1 10.254.1.6/24 $ ip -n B route add default dev _v1 scope global $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000 $ ip -n B link set gre1 up # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1), # and the inner header has no ECT bits set: $ cat send_pkt.py #!/usr/bin/env python3 from scapy.all import * pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00' b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85' b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb' b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12' b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234' b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ') send(pkt) $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1 $ sudo ip netns exec A python3 send_pkt.py In the original packet, the source/destinatio MAC addresses are dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26 In the received packet, they are dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27 Thanks to Lahav Schlesinger <[email protected]> and Isaac Garzon <[email protected]> for helping me pinpoint the origin. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Cc: David S. Miller <[email protected]> Cc: Hideaki YOSHIFUJI <[email protected]> Cc: David Ahern <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Gilad Naaman <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23tipc: fix sleeping in tipc accept routineHoang Le1-5/+4
The release_sock() is blocking function, it would change the state after sleeping. In order to evaluate the stated condition outside the socket lock context, switch to use wait_woken() instead. Fixes: 6398e23cdb1d8 ("tipc: standardize accept routine") Acked-by: Jon Maloy <[email protected]> Signed-off-by: Hoang Le <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23tipc: fix implicit-connect for SYN+Xin Long1-8/+13
For implicit-connect, when it's either SYN- or SYN+, an ACK should be sent back to the client immediately. It's not appropriate for the client to enter established state only after receiving data from the server. On client side, after the SYN is sent out, tipc_wait_for_connect() should be called to wait for the ACK if timeout is set. This patch also restricts __tipc_sendstream() to call __sendmsg() only when it's in TIPC_OPEN state, so that the client can program in a single loop doing both connecting and data sending like: for (...) sendmsg(dest, buf); This makes the implicit-connect more implicit. Fixes: b97bf3fd8f6a ("[TIPC] Initial merge") Signed-off-by: Xin Long <[email protected]> Acked-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23octeontx2-af: Remove unnecessary devm_kfreeSunil Goutham1-1/+0
Remove devm_kfree of memory where VLAN entry to RVU PF mapping info is saved. This will be freed anyway at driver exit. Having this could result in warning from devm_kfree() if the memory is not allocated due to errors in rvu_nix_block_init() before nix_setup_txvlan(). Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23i40e: Fix log TC creation failure when max num of queues is exceededJedrzej Jagielski1-0/+2
Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Imam Hassan Reza Biswas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Fix queue-to-TC mapping on TxJedrzej Jagielski3-0/+53
In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce74ef ("i40e: transmit, receive, and NAPI") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Imam Hassan Reza Biswas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Add additional info to PHY type errorLukasz Cieplicki1-1/+1
In case of PHY type error occurs, the message was too generic. Add additional info to PHY type error indicating that it can be wrong cable connected. Fixes: 124ed15bf126 ("i40e: Add dual speed module support") Signed-off-by: Lukasz Cieplicki <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Fix firmware LLDP agent related warningArkadiusz Kubalewski1-0/+4
Make warning meaningful for the user. Previously the trace: "Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN" was produced when user tried to start Firmware LLDP agent, just after it was stopped with sequence: ethtool --set-priv-flags <dev> disable-fw-lldp on ethtool --set-priv-flags <dev> disable-fw-lldp off (without any delay between the commands) At that point the firmware is still processing stop command, the behavior is expected. Fixes: c1041d070437 ("i40e: Missing response checks in driver when starting/stopping FW LLDP") Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Imam Hassan Reza Biswas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Fix logic of disabling queuesArkadiusz Kubalewski1-24/+34
Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23netfilter: nfnl_hook: fix unused variable warningArnd Bergmann1-0/+2
The only user of this variable is in an #ifdef: net/netfilter/nfnetlink_hook.c: In function 'nfnl_hook_entries_head': net/netfilter/nfnetlink_hook.c:177:28: error: unused variable 'netdev' [-Werror=unused-variable] Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-07-23netfilter: nft_nat: allow to specify layer 4 protocol NAT onlyPablo Neira Ayuso1-1/+3
nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified. Fixes: d07db9884a5f ("netfilter: nf_tables: introduce nft_validate_register_load()") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-07-23netfilter: conntrack: adjust stop timestamp to real expiry valueFlorian Westphal1-1/+6
In case the entry is evicted via garbage collection there is delay between the timeout value and the eviction event. This adjusts the stop value based on how much time has passed. Fixes: b87a2f9199ea82 ("netfilter: conntrack: add gc worker to remove timed-out entries") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-07-23netfilter: nft_last: avoid possible false sharingPablo Neira Ayuso1-7/+13
Use the idiom described in: https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE#it-may-improve-performance Moreover, prevent a compiler optimization. Fixes: 836382dc2471 ("netfilter: nf_tables: add last expression") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-07-23netfilter: flowtable: avoid possible false sharingPablo Neira Ayuso1-1/+5
The flowtable follows the same timeout approach as conntrack, use the same idiom as in cc16921351d8 ("netfilter: conntrack: avoid same-timeout update") but also include the fix provided by e37542ba111f ("netfilter: conntrack: avoid possible false sharing"). Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-07-23cfg80211: Fix possible memory leak in function cfg80211_bss_updateNguyen Dinh Phi1-4/+2
When we exceed the limit of BSS entries, this function will free the new entry, however, at this time, it is the last door to access the inputed ies, so these ies will be unreferenced objects and cause memory leak. Therefore we should free its ies before deallocating the new entry, beside of dropping it from hidden_list. Signed-off-by: Nguyen Dinh Phi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-07-23nl80211: limit band information in non-split dataJohannes Berg1-1/+4
In non-split data, we shouldn't be adding S1G and 6 GHz data (or future bands) since we're really close to the 4k message size limit. Remove those bands, any modern userspace that can use S1G or 6 GHz should already be using split dumps, and if not then it needs to update. Link: https://lore.kernel.org/r/20210712215329.31444162a2c2.I5555312e4a074c84f8b4e7ad79dc4d1fbfc5126c@changeid Signed-off-by: Johannes Berg <[email protected]>
2021-07-23virt_wifi: fix error on connectMatteo Croce1-20/+32
When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-07-23mac80211: fix enabling 4-address mode on a sta vif after assocFelix Fietkau3-2/+23
Notify the driver about the 4-address mode change and also send a nulldata packet to the AP to notify it about the change Fixes: 1ff4e8f2dec8 ("mac80211: notify the driver when a sta uses 4-address mode") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-07-23mac80211: fix starting aggregation sessions on mesh interfacesFelix Fietkau1-25/+32
The logic for starting aggregation sessions was recently moved from minstrel_ht to mac80211, into the subif tx handler just after the sta lookup. Unfortunately this didn't work for mesh interfaces, since the sta lookup is deferred until a much later point in time on those. Fix this by also calling the aggregation check right after the deferred sta lookup. Fixes: 08a46c642001 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-07-23mac80211: Do not strip skb headroom on monitor framesJohan Almbladh1-1/+2
When a monitor interface is present together with other interfaces, a received skb is copied and received on the monitor netdev. Before, the copied skb was allocated with exactly the amount of space needed for the radiotap header, resulting in an skb without any headroom at all being received on the monitor netdev. With the introduction of eBPF and XDP in the kernel, skbs may be processed by custom eBPF programs. However, since the skb cannot be reallocated in the eBPF program, no more data or headers can be pushed. The old code made sure the final headroom was zero regardless of the value of NET_SKB_PAD, so increasing that constant would have no effect. Now we allocate monitor skb copies with a headroom of NET_SKB_PAD bytes before the radiotap header. Monitor interfaces now behave in the same way as other netdev interfaces that honor the NET_SKB_PAD constant. Signed-off-by: Johan Almbladh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-07-22Merge tag 'arm64-fixes' of ↵Linus Torvalds5-59/+40
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A pair of arm64 fixes for -rc3. The straightforward one is a fix to our firmware calling stub, which accidentally started corrupting the link register on machines with SVE. Since these machines don't really exist yet, it wasn't spotted in -next. The other fix is a revert-and-a-bit of a patch originally intended to allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A side-effect of this change was that our pXd_set_huge() implementations could be replaced with generic dummy functions depending on the levels of page-table being used, which in turn broke the boot if we fail to create the linear mapping as a result of using these functions to operate on the pgd. Huge thanks to Michael Ellerman for modifying the revert so as not to regress PPC 8xx in terms of functionality. Anyway, that's the background and it's also available in the commit message along with Link tags pointing at all of the fun. Summary: - Fix hang when issuing SMC on SVE-capable system due to clobbered LR - Fix boot failure due to missing block mappings with folded page-table" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge" arm64: smccc: Save lr before calling __arm_smccc_sve_check()
2021-07-22Merge tag 'hyperv-fixes-signed-20210722' of ↵Linus Torvalds2-33/+65
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - bug fix from Haiyang for vmbus CPU assignment - revert of a bogus patch that went into 5.14-rc1 * tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Revert "x86/hyperv: fix logical processor creation" Drivers: hv: vmbus: Fix duplicate CPU assignments within a device
2021-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds77-269/+1217
Pull networking fixes from David Miller: 1) Fix type of bind option flag in af_xdp, from Baruch Siach. 2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao. 3) PM refcnt imbakance in r8152, from Takashi Iwai. 4) Sign extension ug in liquidio, from Colin Ian King. 5) Mising range check in s390 bpf jit, from Colin Ian King. 6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan. 7) Fix skb page recycling race, from Ilias Apalodimas. 8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin. 9) netrom timer sk refcnt issues, from Nguyen Dinh Phi. 10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric Dumazet. 11) act_skbmod should only operate on ethernet packets, from Peilin Ye. 12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo Abeni. 13) Fix sparx5 dependencies, from Yajun Deng. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits) dpaa2-switch: seed the buffer pool after allocating the swp net: sched: cls_api: Fix the the wrong parameter net: sparx5: fix unmet dependencies warning net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum net: dsa: ensure linearized SKBs in case of tail taggers ravb: Remove extra TAB ravb: Fix a typo in comment net: dsa: sja1105: make VID 4095 a bridge VLAN too tcp: disable TFO blackhole logic by default sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set net: ixp46x: fix ptp build failure ibmvnic: Remove the proper scrq flush selftests: net: add ESP-in-UDP PMTU test udp: check encap socket in __udp_lib_err sctp: update active_key for asoc when old key is being replaced r8169: Avoid duplicate sysfs entry creation error ixgbe: Fix packet corruption due to missing DMA sync Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()" ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions fsl/fman: Add fibre support ...
2021-07-22Merge tag 'mmc-v5.14-rc1' of ↵Linus Torvalds2-24/+31
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - Use kref to fix KASAN splats triggered during card removal - Don't allocate IDA for OF aliases * tag 'mmc-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Don't allocate IDA for OF aliases mmc: core: Use kref in place of struct mmc_blk_data::usage
2021-07-22dpaa2-switch: seed the buffer pool after allocating the swpIoana Ciornei1-8/+8
Any interraction with the buffer pool (seeding a buffer, acquire one) is made through a software portal (SWP, a DPIO object). There are circumstances where the dpaa2-switch driver probes on a DPSW before any DPIO devices have been probed. In this case, seeding of the buffer pool will lead to a panic since no SWPs are initialized. To fix this, seed the buffer pool after making sure that the software portals have been probed and are ready to be used. Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by: Ioana Ciornei <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-22net: sched: cls_api: Fix the the wrong parameterYajun Deng1-1/+1
The 4th parameter in tc_chain_notify() should be flags rather than seq. Let's change it back correctly. Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Signed-off-by: Yajun Deng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-22net: sparx5: fix unmet dependencies warningRandy Dunlap1-0/+1
WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y] Signed-off-by: Randy Dunlap <[email protected]> Cc: Lars Povlsen <[email protected]> Cc: Steen Hegelund <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21Merge branch 'ksz-dsa-fixes'David S. Miller2-5/+18
Lino Sanfilippo says: ==================== Fixes for KSZ DSA switch These patches fix issues I encountered while using a KSZ9897 as a DSA switch with a broadcom GENET network device as the DSA master device. PATCH 1 fixes an invalid access to an SKB in case it is scattered. PATCH 2 fixes incorrect hardware checksum calculation caused by the DSA tag. Changes in v2: - instead of linearizing the SKBs only for KSZ switches ensure linearized SKBs for all tail taggers by clearing the feature flags NETIF_F_HW_SG and NETIF_F_FRAGLIST (suggested by Vladimir Oltean) The patches have been tested with a KSZ9897 and apply against net-next. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-07-21net: dsa: tag_ksz: dont let the hardware process the layer 4 checksumLino Sanfilippo1-0/+9
If the checksum calculation is offloaded to the network device (e.g due to NETIF_F_HW_CSUM inherited from the DSA master device), the calculated layer 4 checksum is incorrect. This is since the DSA tag which is placed after the layer 4 data is considered as being part of the daa and thus errorneously included into the checksum calculation. To avoid this, always calculate the layer 4 checksum in software. Signed-off-by: Lino Sanfilippo <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21net: dsa: ensure linearized SKBs in case of tail taggersLino Sanfilippo1-5/+9
The function skb_put() that is used by tail taggers to make room for the DSA tag must only be called for linearized SKBS. However in case that the slave device inherited features like NETIF_F_HW_SG or NETIF_F_FRAGLIST the SKB passed to the slaves transmit function may not be linearized. Avoid those SKBs by clearing the NETIF_F_HW_SG and NETIF_F_FRAGLIST flags for tail taggers. Furthermore since the tagging protocol can be changed at runtime move the code for setting up the slaves features into dsa_slave_setup_tagger(). Suggested-by: Vladimir Oltean <[email protected]> Signed-off-by: Lino Sanfilippo <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21ravb: Remove extra TABBiju Das1-1/+1
Align the member description comments for struct ravb_desc by removing the extra TAB. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21ravb: Fix a typo in commentBiju Das1-1/+1
Fix the typo RX->TX in comment, as the code following the comment process TX and not RX. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21net: dsa: sja1105: make VID 4095 a bridge VLAN tooVladimir Oltean1-0/+6
This simple series of commands: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 fails on sja1105 with the following error: [ 33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN [ 33.447710] sja1105 spi0.1: Invalid config, cannot upload Warning: sja1105: Failed to change VLAN Ethertype. For context, sja1105 has 3 operating modes: - SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware - SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware - SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the bridge_vlans are committed to hardware Swapping out a VLAN list and another in happens in sja1105_build_vlan_table(), which performs a delta update procedure. That function is called from a few places, notably from sja1105_vlan_filtering() which is called from the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler. The above set of 2 commands fails when run on a kernel pre-commit 8841f6e63f2c ("net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by default"). So the priv->vlan_state transition that takes place is between VLAN-unaware and full VLAN filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans are swapped in. So why does it fail? Well, the bridge driver, through nbp_vlan_init(), first sets up the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then proceeds to call nbp_vlan_add for the default_pvid. So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge VLANs (yet). So we have wiped the VLAN table clean, and the low-level static config checker complains of an invalid configuration. We _will_ add the bridge VLANs using the dynamic config interface, albeit later, when nbp_vlan_add() calls us. So it is natural that it fails. So why did it ever work? Surprisingly, it looks like I only tested this configuration with 2 things set up in a particular way: - a network manager that brings all ports up - a kernel with CONFIG_VLAN_8021Q=y It is widely known that commit ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net device that comes up. DSA treats these VLANs as bridge VLANs, and therefore, in my testing, the list of bridge_vlans was never empty. However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily empty, and the sja1105_static_config_reload() call from sja1105_vlan_filtering() will fail. To fix this, the simplest thing is to keep VID 4095, the one used for CPU-injected control packets since commit ed040abca4c1 ("net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic"), in the list of bridge VLANs too, not just the list of tag_8021q VLANs. This ensures that the list of bridge VLANs will never be empty. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Reported-by: Radu Pirea (NXP OSS) <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21tcp: disable TFO blackhole logic by defaultWei Wang3-3/+10
Multiple complaints have been raised from the TFO users on the internet stating that the TFO blackhole logic is too aggressive and gets falsely triggered too often. (e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/) Considering that most middleboxes no longer drop TFO packets, we decide to disable the blackhole logic by setting /proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default. Fixes: cf1ef3f0719b4 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Wei Wang <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Neal Cardwell <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Acked-by: Yuchung Cheng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not setXin Long1-2/+2
Currently, in sctp_packet_config(), sctp_transport_pmtu_check() is called to update transport pathmtu with dst's mtu when dst's mtu has been changed by non sctp stack like xfrm. However, this should only happen when SPP_PMTUD_ENABLE is set, no matter where dst's mtu changed. This patch is to fix by checking SPP_PMTUD_ENABLE flag before calling sctp_transport_pmtu_check(). Thanks Jacek for reporting and looking into this issue. v1->v2: - add the missing "{" to fix the build error. Fixes: 69fec325a643 ('Revert "sctp: remove sctp_transport_pmtu_check"') Reported-by: Jacek Szafraniec <[email protected]> Tested-by: Jacek Szafraniec <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21Merge tag 's390-5.14-3' of ↵Linus Torvalds9-37/+49
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - fix / add expoline usage in "DMA" code - fix compat vdso Makefile to avoid permanent rebuild - fix ftrace_update_ftrace_func to avoid NULL pointer dereference - update defconfigs - trivial coding style fix * tag 's390-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs s390/cpumf: fix semicolon.cocci warnings s390/boot: fix use of expolines in the DMA code s390/ftrace: fix ftrace_update_ftrace_func implementation s390/defconfig: allow early device mapper disks s390/vdso32: add vdso32.lds to targets
2021-07-21Merge tag 'spi-fix-v5.14-rc2' of ↵Linus Torvalds7-65/+90
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A collection of driver specific fixes, there was a bit of a kerfuffle with some last minute review on hte spi-cadence-quadspi division by zero change but otherwise nothing terribly remarkable here - important fixes if you have the hardware but nothing with too wide an impact" * tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-bcm2835: Fix deadlock spi: cadence: Correct initialisation of runtime PM again spi: cadence-quadspi: Disable Auto-HW polling spi: spi-cadence-quadspi: Fix division by zero warning spi: spi-cadence-quadspi: Revert "Fix division by zero warning" spi: spi-cadence-quadspi: Fix division by zero warning spi: mediatek: move devm_spi_register_master position spi: mediatek: fix fifo rx mode spi: atmel: Fix CS and initialization bug spi: stm32: fixes pm_runtime calls in probe/remove spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay spi: stm32h7: fix full duplex irq handler handling
2021-07-21Merge tag 'regulator-fix-v5.14-rc2' of ↵Linus Torvalds7-23/+30
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few driver specific fixes that came in since the merge window, plus a change to mark the regulator-fixed-domain DT binding as deprecated in order to try to to discourage any new users while a better solution is put in place" * tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: hi6421: Fix getting wrong drvdata regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register regulator: fixed: Mark regulator-fixed-domain as deprecated regulator: bd9576: Fix testing wrong flag in check_temp_flag_mismatch regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure regulator: rt5033: Fix n_voltages settings for BUCK and LDO regulator: rtmv20: Fix wrong mask for strobe-polarity-high
2021-07-21Merge tag 'afs-fixes-20210721' of ↵Linus Torvalds4-33/+87
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: - Fix a tracepoint that causes one of the tracing subsystem query files to crash if the module is loaded - Fix afs_writepages() to take account of whether the storage rpc actually succeeded when updating the cyclic writeback counter - Fix some error code propagation/handling - Fix place where afs_writepages() was setting writeback_index to a file position rather than a page index * tag 'afs-fixes-20210721' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Remove redundant assignment to ret afs: Fix setting of writeback_index afs: check function return afs: Fix tracepoint string placement with built-in AFS
Powered by cgit, Gruvboxed by Blaster4385.