| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Set the practical limit to the period size (the fragment shift in OSS)
instead of a full 31bit; a too large value could lead to the exhaust
of memory as we allocate temporary buffers of the period size, too.
As of this patch, we set to 16MB limit, which should cover all use
cases.
Reported-by: [email protected]
Reported-by: Bixuan Cui <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The period size calculation in OSS layer may receive a negative value
as an error, but the code there assumes only the positive values and
handle them with size_t. Due to that, a too big value may be passed
to the lower layers.
This patch changes the code to handle with ssize_t and adds the proper
error checks appropriately.
Reported-by: [email protected]
Reported-by: Bixuan Cui <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Keep the HDA_CODEC_ENTRY entries sorted by the codec VID. ADL-P
is the only misplaced Intel HDMI codec.
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add HD Audio PCI ID and HDMI codec vendor ID for Intel DG2.
Reviewed-by: Uma Shankar <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
For cs8409, it is required to run Jack Detect on resume.
Jack Detect on cs8409+cs42l42 requires an interrupt from
cs42l42 to be sent to cs8409 which is propogated to the driver
via an unsolicited event.
However, the hda_codec drops unsolicited events if the power_state
is not set to PMSG_ON. Which is set at the end of the resume call.
This means there is a race condition between setting power_state
to PMSG_ON and receiving the interrupt.
To solve this, we can add an API to set the power_state earlier
and call that before we start Jack Detect.
This does not cause issues, since we know inside our driver that
we are already initialized, and ready to handle the unsolicited
events.
Signed-off-by: Stefan Binding <[email protected]>
Signed-off-by: Vitaly Rodionov <[email protected]>
Cc: <[email protected]> # v5.15+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.16
There's a large but repetitive set of fixes here for issues with the
Tegra kcontrols not correctly reporting changes to userspace, a fix for
some issues with matching on older x86 platforms introduced during the
merge window together with a set of smaller fixes and one new system
quirk.
|
|
It is not unusual for ALSA/ASoC hw_params callbacks to be invoked
multiple times. Reset and free the DAI widget before reconfiguring
it to keep the DAI widget use_count balanced.
Fixes: 0acb48dd31e3 ("ASoC: SOF: Intel: hda: make sure DAI widget is set up before IPC")
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Paul Olaru <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Higher speeds are only supported when PLL is enabled, but
the current driver doesn't enable PLL outside of stream
use cases, so better to set the lowest SPI speed accepted
by the entire device.
Move the current frequency set to the spi sub-driver so
the whole device can benefit from that speed.
spi-max-frequency property could be used, but ACPI systems don't
support it, so by setting it in the spi sub-driver probe
both Device Trees and ACPI systems are supported.
Signed-off-by: Lucas Tanure <[email protected]>
Reviewed-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We've added quirks for ESS8336 but missed CML, add quirks for both LP
and H versions.
BugLink: https://github.com/thesofproject/linux/issues/3248
Fixes: 9d36ceab9415 ("ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec")
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
We have configurations for this codec on APL, GLK, JSL and TGL, somehow the
information that some designs rely on CometLake was not shared.
BugLink: https://github.com/thesofproject/linux/issues/3248
Fixes: 790049fb6623 ("ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec")
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Without a module alias, autoloading the driver does not occurr
when it is built as a module.
By adding a module alias, the driver now probes fine automatically
and therefore analog audio output works as it should.
Fixes: 0d6a04da9b25 ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Nicolas Frattaroli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Commit dac7cbd55dca ("ASoC: Intel: soc-acpi-byt: shrink tables using
compatible IDs") and commit 959ae8215a9e ("ASoC: Intel: soc-acpi-cht:
shrink tables using compatible IDs") simplified the match tables in
soc-acpi-intel-byt-match.c and soc-acpi-intel-cht-match.c by merging
identical entries using the new .comp_ids snd_soc_acpi_mach field to
point a single entry to multiple ACPI HIDs and clearing the previously
unique per entry .id field.
But various machine drivers from sound/soc/intel/boards rely on mach->id
in one or more ways, e.g. some drivers contain the following snippets:
adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, ...
if (!strncmp(snd_soc_cards[i].codec_id, mach->id, 8)) { ...
All of which are broken by the match table shrinking.
Make the snd_soc_acpi_mach.id field non const (the storage for the tables
already is non const) and on a comps_ids match copy the matching HID to
the id field to fix this.
Fixes: dac7cbd55dca ("ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs")
Fixes: 959ae8215a9e ("ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs")
Suggested-by: Pierre-Louis Bossart <[email protected]>
Cc: Pierre-Louis Bossart <[email protected]>
Cc: Brent Lu <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
We previously added support for other Intel platforms but missed
JasperLake.
BugLink: https://github.com/thesofproject/linux/issues/3210
Fixes: 9d36ceab9415 ('ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The recent change made mistakenly the stream for capture started at
prepare stage. Add the stream direction check to avoid it.
Fixes: 9c9a3b9da891 ("ALSA: usb-audio: Rename early_playback_start flag with lowlatency_playback")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The recent regression report revealed that the judgment of the
low-latency playback mode based on the runtime->stop_threshold cannot
work reliably at the prepare stage, as sw_params call may happen at
any time, and PCM dmix actually sets it up after the prepare call.
This ended up with the stall of the stream as PCM ack won't be issued
at all.
For addressing this, check the free-wheeling mode again at the PCM
trigger right before starting the stream again, and allow switching to
the non-LL mode at a late stage.
Fixes: d5f871f89e21 ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-and-tested-by: Kirill A. Shutemov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The master and next_conj of rcs_ops are used for iterating the
resource list entries, and currently those are supposed to return the
current value. The problem is that next_conf may go over the last
entry before the loop abort condition is evaluated, and it may return
the "current" value that is beyond the array size. It was caught
recently as a GPF, for example.
Those return values are, however, never actually evaluated, hence
basically we don't have to consider the current value as the return at
all. By dropping those return values, the potential out-of-range
access above is also fixed automatically.
This patch changes the return type of master and next_conj callbacks
to void and drop the superfluous code accordingly.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214985
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in Mixer driver.
Fixes: 05bb3d5ec64a ("ASoC: tegra: Add Tegra210 based Mixer driver")
Signed-off-by: Sameer Pujar <[email protected]>
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in ADX driver.
Fixes: a99ab6f395a9 ("ASoC: tegra: Add Tegra210 based ADX driver")
Signed-off-by: Sameer Pujar <[email protected]>
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in AMX driver.
Fixes: 77f7df346c45 ("ASoC: tegra: Add Tegra210 based AMX driver")
Signed-off-by: Sameer Pujar <[email protected]>
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in SFC driver.
Fixes: b2f74ec53a6c ("ASoC: tegra: Add Tegra210 based SFC driver")
Signed-off-by: Sameer Pujar <[email protected]>
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Filter
out duplicate updates in MVC driver.
Fixes: e539891f9687 ("ASoC: tegra: Add Tegra210 based MVC driver")
Signed-off-by: Sameer Pujar <[email protected]>
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the AHUB driver accordingly.
Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Sameer Pujar <[email protected]>
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the DSPK driver accordingly.
Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the DMIC driver accordingly.
Fixes: 8c8ff982e9e2 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the I2S driver accordingly.
Fixes: c0bfa98349d1 ("ASoC: tegra: Add Tegra210 based I2S driver")
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the ADMAIF driver accordingly.
Fixes: f74028e159bb ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Suggested-by: Jaroslav Kysela <[email protected]>
Suggested-by: Mark Brown <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: e539891f9687 ("ASoC: tegra: Add Tegra210 based MVC driver")
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: b2f74ec53a6c ("ASoC: tegra: Add Tegra210 based SFC driver")
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: 8c8ff982e9e2 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: c0bfa98349d1 ("ASoC: tegra: Add Tegra210 based I2S driver")
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.
Fixes: f74028e159bb ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Reviewed-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.16
A relatively large collection of fixes that came in since the merge
window, though a lot of this is just a collection of new machine quirks
for x86 platforms.
|
|
HP ProBook 435 G7 (SSID 103c:8735) needs the similar quirk as another
HP ProBook for enabling the mute and the mic-mute LEDs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215021
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fix divider calculation in the case of 32 bits channel
configuration, when no master clock is used.
Fixes: e4e6ec7b127c ("ASoC: stm32: Add I2S driver")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
For some reason we ended up using snd_soc_component_write_field
for HPHL and snd_soc_component_update_bits for HPHR, so fix this.
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Error returned from wcd934x_slim_set_hw_params() are not passed to upper layer,
this could be misleading to the user which can start sending stream leading
to unnecessary errors.
Fix this by properly returning the errors.
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Interrupt Clear registers WCD938X_INTR_CLEAR_0 - WCD938X_INTR_CLEAR_2
are not marked as volatile. This has resulted in a missing interrupt bug
while performing runtime pm. regcache_sync() during runtime pm resume path
will write to Interrupt clear registers with previous values which basically
clears the pending interrupt and actual interrupt handler never sees this
interrupt.
This issue is more visible with headset plug-in plug-out case compared to
headset button.
Fix this by adding the Interrupt clear registers to volatile range
Fixes: 8d78602aa87a ("ASoC: codecs: wcd938x: add basic driver")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 8a9782346dcc ("ASoC: topology: Add topology core")
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Validate port id before it starts sending commands to dsp this would
make error handling simpler.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
reset value for port is -1 so printing an hex would not give us very
useful debug information, so use %d instead.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Error handling in q6asm_dai_prepare() seems to be completely broken,
Fix this by handling it properly.
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Stream IDs are reused across multiple BackEnd mixers, do not reset the
stream mixers if they are not already set for that particular FrontEnd.
Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below
command will reset previously setup MultiMedia1 stream, because both of them
are using MultiMedia1 PCM stream.
amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0
reset the FrontEnd Mixers conditionally to fix this issue.
This is more noticeable in desktop setup, where in alsactl tries to restore
the alsa state and overwriting the previous mixer settings.
Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Q6PRM clks need to be disabled using PRM_CMD_RELEASE_HW_RSC dsp command
rather then using PRM_CMD_RSP_REQUEST_HW_RSC cmd with rate set to zero.
DSP will throw errors if we try to disable the clock using existing code.
Fix this by properly handling the clk release.
Fixes: 9a0e5d6fb16f ("ASoC: qdsp6: audioreach: add q6prm support")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This patch fixes the static analysis warning as it is correctly
indicating a possible code path, it cannot know that for the affected
firmware versions subname would always be NULL.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Simon Trimmer <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Changes from ChiYuan Huang <[email protected]> to fix a couple of
bugs and add a new device ID/quirk for the rt9120s to the driver.
|
|
Since the recent code refactoring using devres, the variable cm in
snd_cmipci_probe() is no longer referred.
Fixes: 87e082ad84a7 ("ALSA: cmipci: Allocate resources with device-managed APIs")
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This applies a SND_PCI_QUIRK(...) to the ASRock NUC Box 1100 series. This
fixes the issue of the headphone jack not being detected unless warm
rebooted from a certain other OS.
When booting a certain other OS some coeff settings are changed that enable
the audio jack. These settings are preserved on a warm reboot and can be
easily dumped.
The relevant indexes and values where gathered by naively diff-ing and
reading a working and a non-working coeff dump.
Signed-off-by: Werner Sembach <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
commit d5bb69dc54ec1 ("ASoC: sh: rcar: dma: : use proper DMAENGINE
API for termination") updated DMAEngine API _all() to _sync(),
but it should be _async().
_all() and _async() are almost same, the difference is only return
error code. _sync() will call dmaengine_synchronize() and will be
kernel panic.
This patch is needed for v5.15 or later.
[ 27.293264] BUG: scheduling while atomic: irq/130-ec70000/131/0x00000003
[ 27.300084] 2 locks held by irq/130-ec70000/131:
[ 27.304743] #0: ffff0004c274d908 (&group->lock){....}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x48/0x54
[ 27.314344] #1: ffff0004c1788c60 (&priv->lock#2){....}-{2:2}, at: rsnd_soc_dai_trigger+0x70/0x7bc
[ 27.323409] irq event stamp: 206
[ 27.326664] hardirqs last enabled at (205): [<ffff80001082de50>] _raw_spin_unlock_irq+0x50/0xa0
[ 27.335529] hardirqs last disabled at (206): [<ffff80001082d9e4>] _raw_spin_lock_irqsave+0xc4/0xd0
[ 27.344564] softirqs last enabled at (0): [<ffff800010037324>] copy_process+0x644/0x1b10
[ 27.352819] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 27.359142] CPU: 0 PID: 131 Comm: irq/130-ec70000 Not tainted 5.14.0-rc1+ #918
[ 27.366429] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77950 (DT)
[ 27.373975] Call trace:
[ 27.376442] dump_backtrace+0x0/0x1b4
[ 27.380141] show_stack+0x24/0x30
[ 27.383488] dump_stack_lvl+0x8c/0xb8
[ 27.387184] dump_stack+0x18/0x34
[ 27.390528] __schedule_bug+0x8c/0x9c
[ 27.394224] __schedule+0x790/0x8dc
[ 27.397746] schedule+0x7c/0x110
[ 27.401003] synchronize_irq+0x94/0xd0
[ 27.404786] rcar_dmac_device_synchronize+0x20/0x2c
[ 27.409710] rsnd_dmaen_stop+0x50/0x64
[ 27.413495] rsnd_soc_dai_trigger+0x554/0x7bc
[ 27.417890] snd_soc_pcm_dai_trigger+0xe8/0x264
Cc: <[email protected]>
Fixes: commit d5bb69dc54ec1 ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination")
Link: https://lore.kernel.org/r/TY2PR01MB3692889E1A7476C4322CC296D8AE9@TY2PR01MB3692.jpnprd01.prod.outlook.com
Reported-by: Yoshihiro Shimoda <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
With CONFIG_SND_SOC_SOF_COMPRESS=m, the compression code is
not built into a the main SOF driver when that is built-in:
x86_64-linux-ld: sound/soc/sof/ipc.o: in function `ipc_stream_message':
ipc.c:(.text+0x5a2): undefined reference to `snd_sof_compr_fragment_elapsed'
x86_64-linux-ld: sound/soc/sof/topology.o: in function `sof_dai_load':
topology.c:(.text+0x32d1): undefined reference to `snd_sof_compr_init_elapsed_work'
x86_64-linux-ld: topology.c:(.text+0x32e1): undefined reference to `snd_sof_compr_init_elapsed_work'
Make this a 'bool' symbol so it just decides whether the
code gets built at all.
Fixes: 858f7a5c45ca ("ASoC: SOF: Introduce fragment elapsed notification API")
Signed-off-by: Arnd Bergmann <[email protected]>
Tested-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|