aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-01-29ALSA: hda - Enable LPIB delay count for Poulsbo / OaktrailTakashi Iwai1-5/+4
Currently we use LPIB forcibly for both playback and capture for Poulsbo and Oaktrail devices, and this seems rather problematic. The recent fix for LPIB delay count seems working well with these devices, so let's enable it instead. Reported-by: Martin Weishart <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2013-01-28Merge tag 'regulator-3.8-rc5' of ↵Linus Torvalds3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Fairly small stuff - a build failure fix for ST platforms, an error checking fix and an update to the MAINTAINERS file for Liam." * tag 'regulator-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps80031: Use IS_ERR to check return value of regulator_register() regulators: db8500: Fix compile failure for drivers/regulator/dbx500-prcmu.c regulator: MAINTAINERS: update email address
2013-01-29ARM: imx: Remove mx508 supportFabio Estevam19-1703/+9
Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2013-01-29ARM: imx: Remove mach-mx51_3ds boardFabio Estevam4-193/+0
mach-mx51_3ds only supports old silicon version of MX51 and was replaced with mx51 babbage, which is the official MX51 development board. No need to maintain it anymore. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2013-01-29ARM: imx: use debug_ll_io_init() for imx6qShawn Guo4-54/+2
Use debug_ll_io_init() to map low level debug port for imx6q, so that arch/arm/mach-imx/lluart.c can be removed. Signed-off-by: Shawn Guo <[email protected]>
2013-01-29ARM: imx: remove unused imx6q_clock_map_io()Shawn Guo3-4/+0
imx6q_clock_map_io() becomes an empty function since imx6q clock driver is moved to common clock framework. It's used nowhere now. Remove it. Signed-off-by: Shawn Guo <[email protected]>
2013-01-29Merge remote-tracking branch 'regulator/fix/lrg' into tmpMark Brown1-1/+1
2013-01-29Merge remote-tracking branch 'regulator/fix/tps80031' into tmpMark Brown1-1/+1
2013-01-29Merge remote-tracking branch 'regulator/fix/db8500' into tmpMark Brown1-0/+1
2013-01-29ARM: mach-shmobile: emev2: Add reg and device_type properties to cpusSimon Horman1-0/+7
Cc: Mark Rutland <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2013-01-29ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpusSimon Horman1-0/+7
Cc: Mark Rutland <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2013-01-28Merge branch 'merge' of ↵Linus Torvalds6-5/+33
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Whenever you have a chance between two dives, you might want to consider pulling my merge branch to pickup a few fixes for 3.8 that have been accumulating for the last couple of weeks (I was myself travelling then on vacation). Nothing major, just a handful of powerpc bug fixes that I consider worth getting in before 3.8 goes final." And I'll have everybody know that I'm not diving for several days yet. Snif. * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Max next_tb to prevent from replaying timer interrupt powerpc: kernel/kgdb.c: Fix memory leakage powerpc/book3e: Disable interrupt after preempt_schedule_irq powerpc/oprofile: Fix error in oprofile power7_marked_instr_event() function powerpc/pasemi: Fix crash on reboot powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning for ppc32
2013-01-29powerpc: Max next_tb to prevent from replaying timer interruptTiejun Chen1-2/+7
With lazy interrupt, we always call __check_irq_replaysome with decrementers_next_tb to check if we need to replay timer interrupt. So in hotplug case we also need to set decrementers_next_tb as MAX to make sure __check_irq_replay don't replay timer interrupt when return as we expect, otherwise we'll trap here infinitely. Signed-off-by: Tiejun Chen <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2013-01-29powerpc: kernel/kgdb.c: Fix memory leakageCong Ding1-2/+3
the variable backup_current_thread_info isn't freed before existing the function. Signed-off-by: Cong Ding <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2013-01-29powerpc/book3e: Disable interrupt after preempt_schedule_irqTiejun Chen1-0/+13
In preempt case current arch_local_irq_restore() from preempt_schedule_irq() may enable hard interrupt but we really should disable interrupts when we return from the interrupt, and so that we don't get interrupted after loading SRR0/1. Signed-off-by: Tiejun Chen <[email protected]> CC: <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2013-01-29powerpc/oprofile: Fix error in oprofile power7_marked_instr_event() functionCarl E. Love1-1/+1
The calculation for the left shift of the mask OPROFILE_PM_PMCSEL_MSK has an error. The calculation is should be to shift left by (max_cntrs - cntr) times the width of the pmsel field width. However, the #define OPROFILE_MAX_PMC_NUM was used instead of OPROFILE_PMSEL_FIELD_WIDTH. This patch fixes the calculation. Signed-off-by: Carl Love <[email protected]> Acked-by: Paul Mackerras <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2013-01-29powerpc/pasemi: Fix crash on rebootSteven Rostedt1-0/+7
commit f96972f2dc "kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()" added a call to disable_nonboot_cpus() on kernel_restart(), which tries to shutdown all the CPUs except the first one. The issue with the PA Semi, is that it does not support CPU hotplug. When the call is made to __cpu_down(), it calls the notifiers CPU_DOWN_PREPARE, and then tries to take the CPU down. One of the notifiers to the CPU hotplug code, is the cpufreq. The DOWN_PREPARE will call __cpufreq_remove_dev() which calls cpufreq_driver->exit. The PA Semi exit handler unmaps regions of I/O that is used by an interrupt that goes off constantly (system_reset_common, but it goes off during normal system operations too). I'm not sure exactly what this interrupt does. Running a simple function trace, you can see it goes off quite a bit: # tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <idle>-0 [001] 1558.859363: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.860112: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861109: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [001] 1558.861361: .pasemi_system_reset_exception <-.system_reset_exception <idle>-0 [000] 1558.861437: .pasemi_system_reset_exception <-.system_reset_exception When the region is unmapped, the system crashes with: Disabling non-boot CPUs ... Error taking CPU1 down: -38 Unable to handle kernel paging request for data at address 0xd0000800903a0100 Faulting instruction address: 0xc000000000055fcc Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=64 NUMA PA Semi PWRficient Modules linked in: shpchp NIP: c000000000055fcc LR: c000000000055fb4 CTR: c0000000000df1fc REGS: c0000000012175d0 TRAP: 0300 Not tainted (3.8.0-rc4-test-dirty) MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24000088 XER: 00000000 SOFTE: 0 DAR: d0000800903a0100, DSISR: 42000000 TASK = c0000000010e9008[0] 'swapper/0' THREAD: c000000001214000 CPU: 0 GPR00: d0000800903a0000 c000000001217850 c0000000012167e0 0000000000000000 GPR04: 0000000000000000 0000000000000724 0000000000000724 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000001 0000000000a70000 GPR12: 0000000024000080 c00000000fff0000 ffffffffffffffff 000000003ffffae0 GPR16: ffffffffffffffff 0000000000a21198 0000000000000060 0000000000000000 GPR20: 00000000008fdd35 0000000000a21258 000000003ffffaf0 0000000000000417 GPR24: 0000000000a226d0 c000000000000000 0000000000000000 0000000000000000 GPR28: c00000000138b358 0000000000000000 c000000001144818 d0000800903a0100 NIP [c000000000055fcc] .set_astate+0x5c/0xa4 LR [c000000000055fb4] .set_astate+0x44/0xa4 Call Trace: [c000000001217850] [c000000000055fb4] .set_astate+0x44/0xa4 (unreliable) [c0000000012178f0] [c00000000005647c] .restore_astate+0x2c/0x34 [c000000001217980] [c000000000054668] .pasemi_system_reset_exception+0x6c/0x88 [c000000001217a00] [c000000000019ef0] .system_reset_exception+0x48/0x84 [c000000001217a80] [c000000000001e40] system_reset_common+0x140/0x180 Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2013-01-28Merge tag 'md-3.8-fixes' of git://neil.brown.name/mdLinus Torvalds2-64/+38
Pull dmraid fix from NeilBrown: "Just one fix for md in 3.8 dmraid assess redundancy and replacements slightly inaccurately which could lead to some degraded arrays failing to assemble." * tag 'md-3.8-fixes' of git://neil.brown.name/md: DM-RAID: Fix RAID10's check for sufficient redundancy
2013-01-29powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning for ppc32Li Zhong1-0/+2
This patch fixes MAX_STACK_TRACE_ENTRIES too low warning for ppc32, which is similar to commit 12660b17. Reported-by: Christian Kujau <[email protected]> Signed-off-by: Li Zhong <[email protected]> Tested-by: Christian Kujau <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2013-01-28xfs: Fix xfs_swap_extents() after removal of xfs_flushinval_pages()Torsten Kaiser1-2/+2
Commit fb59581404ab7ec5075299065c22cb211a9262a9 removed xfs_flushinval_pages() and changed its callers to use filemap_write_and_wait() and truncate_pagecache_range() directly. But in xfs_swap_extents() this change accidental switched the argument for 'tip' to 'ip'. This patch switches it back to 'tip' Signed-off-by: Torsten Kaiser <[email protected]> Reviewed-by: Ben Myers <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2013-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds1-1/+6
Pull GFS2 fix from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: fix skip unlock condition
2013-01-28Merge tag 'iommu-fixes-v3.8-rc5' of ↵Linus Torvalds1-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "One fix for the AMD IOMMU driver to work around broken BIOSes found in the field. Some BIOSes forget to enable a workaround for a hardware problem which might cause the IOMMU to stop working under high load conditions. The fix makes sure this workaround is enabled." * tag 'iommu-fixes-v3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: IOMMU, AMD Family15h Model10-1Fh erratum 746 Workaround
2013-01-28Merge tag 'mfd-for-linus-3.8-1' of ↵Linus Torvalds24-129/+314
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD fixes from Samuel Ortiz: "This is the first pull request for MFD fixes for 3.8 We have some build failure fixes (twl4030, vexpress, abx500 and tps65910), some actual runtime oops and lockup fixes (rtsx, da9052), and some more hypothetical NULL pointers dereferences fixes for pcf50633 and max776xx. Then we also have additional rtsx fixes for a correct switch output voltage and clock divider correctness for rtl8411 (rtsx driver), and irqdomain fix for db8550-prcmu, and some more cosmetic fixes for arizona and wm5102." * tag 'mfd-for-linus-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: rtsx: Fix oops when rtsx_pci_sdmmc is not probed mfd: wm5102: Fix definition of WM5102_MAX_REGISTER mfd: twl4030: Don't warn about uninitialized return code mfd: da9052/53 lockup fix mfd: rtsx: Add clock divider hook mmc: rtsx: Call MFD hook to switch output voltage mfd: rtsx: Add output voltage switch hook mfd: Fix compile errors and warnings when !CONFIG_AB8500_BM mfd: vexpress: Export global functions to fix build error mfd: arizona: Check errors from regcache_sync() mfd: tc3589x: Use simple irqdomain mfd: pcf50633: Init pcf->dev before using it mfd: max77693: Init max77693->dev before using it mfd: max77686: Init max77686->dev before using it mfd: db8500-prcmu: Fix irqdomain usage mfd: tps65910: Select REGMAP_IRQ in Kconfig to fix build error mfd: arizona: Disable control interface reporting for WM5102 and WM5110
2013-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds97-418/+851
Pull networking updates from David Miller: "Much more accumulated than I would have liked due to an unexpected bout with a nasty flu: 1) AH and ESP input don't set ECN field correctly because the transport head of the SKB isn't set correctly, fix from Li RongQing. 2) If netfilter conntrack zones are disabled, we can return an uninitialized variable instead of the proper error code. Fix from Borislav Petkov. 3) Fix double SKB free in ath9k driver beacon handling, from Felix Feitkau. 4) Remove bogus assumption about netns cleanup ordering in nf_conntrack, from Pablo Neira Ayuso. 5) Remove a bogus BUG_ON in the new TCP fastopen code, from Eric Dumazet. It uses spin_is_locked() in it's test and is therefore unsuitable for UP. 6) Fix SELINUX labelling regressions added by the tuntap multiqueue changes, from Paul Moore. 7) Fix CRC errors with jumbo frame receive in tg3 driver, from Nithin Nayak Sujir. 8) CXGB4 driver sets interrupt coalescing parameters only on first queue, rather than all of them. Fix from Thadeu Lima de Souza Cascardo. 9) Fix regression in the dispatch of read/write registers in dm9601 driver, from Tushar Behera. 10) ipv6_append_data miscalculates header length, from Romain KUNTZ. 11) Fix PMTU handling regressions on ipv4 routes, from Steffen Klassert, Timo Teräs, and Julian Anastasov. 12) In 3c574_cs driver, add necessary parenthesis to "x << y & z" expression. From Nickolai Zeldovich. 13) macvlan_get_size() causes underallocation netlink message space, fix from Eric Dumazet. 14) Avoid division by zero in xfrm_replay_advance_bmp(), from Nickolai Zeldovich. Amusingly the zero check was already there, we were just performing it after the modulus :-) 15) Some more splice bug fixes from Eric Dumazet, which fix things mostly eminating from how we now more aggressively use high-order pages in SKBs. 16) Fix size calculation bug when freeing hash tables in the IPSEC xfrm code, from Michal Kubecek. 17) Fix PMTU event propagation into socket cached routes, from Steffen Klassert. 18) Fix off by one in TX buffer release in netxen driver, from Eric Dumazet. 19) Fix rediculous memory allocation requirements introduced by the tuntap multiqueue changes, from Jason Wang. 20) Remove bogus AMD platform workaround in r8169 driver that causes major problems in normal operation, from Timo Teräs. 21) virtio-net set affinity and select queue don't handle discontiguous cpu numbers properly, fix from Wanlong Gao. 22) Fix a route refcounting issue in loopback driver, from Eric Dumazet. There's a similar fix coming that we might add to the macvlan driver as well. 23) Fix SKB leaks in batman-adv's distributed arp table code, from Matthias Schiffer. 24) r8169 driver gives descriptor ownership back the hardware before we're done reading the VLAN tag out of it, fix from Francois Romieu. 25) Checksums not calculated properly in GRE tunnel driver fix from Pravin B Shelar. 26) Fix SCTP memory leak on namespace exit." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits) dm9601: support dm9620 variant SCTP: Free the per-net sysctl table on net exit. v2 net: phy: icplus: fix broken INTR pin settings net: phy: icplus: Use the RGMII interface mode to configure clock delays IP_GRE: Fix kernel panic in IP_GRE with GRE csum. sctp: set association state to established in dupcook_a handler ip6mr: limit IPv6 MRT_TABLE identifiers r8169: fix vlan tag read ordering. net: cdc_ncm: use IAD provided by the USB core batman-adv: filter ARP packets with invalid MAC addresses in DAT batman-adv: check for more types of invalid IP addresses in DAT batman-adv: fix skb leak in batadv_dat_snoop_incoming_arp_reply() net: loopback: fix a dst refcounting issue virtio-net: reset virtqueue affinity when doing cpu hotplug virtio-net: split out clean affinity function virtio-net: fix the set affinity bug when CPU IDs are not consecutive can: pch_can: fix invalid error codes can: ti_hecc: fix invalid error codes can: c_can: fix invalid error codes r8169: remove the obsolete and incorrect AMD workaround ...
2013-01-28ARM: tegra: add AHB entry to Tegra114 DTHiroshi Doyu1-0/+5
Add AHB entry. Signed-off-by: Hiroshi Doyu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28xfs: Fix possible use-after-free with AIOJan Kara1-1/+1
Running AIO is pinning inode in memory using file reference. Once AIO is completed using aio_complete(), file reference is put and inode can be freed from memory. So we have to be sure that calling aio_complete() is the last thing we do with the inode. CC: [email protected] CC: Ben Myers <[email protected]> CC: [email protected] Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Ben Myers <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2013-01-28xfs: fix shutdown hang on invalid inode during createDave Chinner3-2/+13
When the new inode verify in xfs_iread() fails, the create transaction is aborted and a shutdown occurs. The subsequent unmount then hangs in xfs_wait_buftarg() on a buffer that has an elevated hold count. Debug showed that it was an AGI buffer getting stuck: [ 22.576147] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck [ 22.976213] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck [ 23.376206] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck [ 23.776325] XFS (vdb): buffer 0x2/0x1, hold 0x2 stuck The trace of this buffer leading up to the shutdown (trimmed for brevity) looks like: xfs_buf_init: bno 0x2 nblks 0x1 hold 1 caller xfs_buf_get_map xfs_buf_get: bno 0x2 len 0x200 hold 1 caller xfs_buf_read_map xfs_buf_read: bno 0x2 len 0x200 hold 1 caller xfs_trans_read_buf_map xfs_buf_iorequest: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_read xfs_buf_hold: bno 0x2 nblks 0x1 hold 1 caller xfs_buf_iorequest xfs_buf_rele: bno 0x2 nblks 0x1 hold 2 caller xfs_buf_iorequest xfs_buf_iowait: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_read xfs_buf_ioerror: bno 0x2 len 0x200 hold 1 caller xfs_buf_bio_end_io xfs_buf_iodone: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_ioend xfs_buf_iowait_done: bno 0x2 nblks 0x1 hold 1 caller _xfs_buf_read xfs_buf_hold: bno 0x2 nblks 0x1 hold 1 caller xfs_buf_item_init xfs_trans_read_buf: bno 0x2 len 0x200 hold 2 recur 0 refcount 1 xfs_trans_brelse: bno 0x2 len 0x200 hold 2 recur 0 refcount 1 xfs_buf_item_relse: bno 0x2 nblks 0x1 hold 2 caller xfs_trans_brelse xfs_buf_rele: bno 0x2 nblks 0x1 hold 2 caller xfs_buf_item_relse xfs_buf_unlock: bno 0x2 nblks 0x1 hold 1 caller xfs_trans_brelse xfs_buf_rele: bno 0x2 nblks 0x1 hold 1 caller xfs_trans_brelse xfs_buf_trylock: bno 0x2 nblks 0x1 hold 2 caller _xfs_buf_find xfs_buf_find: bno 0x2 len 0x200 hold 2 caller xfs_buf_get_map xfs_buf_get: bno 0x2 len 0x200 hold 2 caller xfs_buf_read_map xfs_buf_read: bno 0x2 len 0x200 hold 2 caller xfs_trans_read_buf_map xfs_buf_hold: bno 0x2 nblks 0x1 hold 2 caller xfs_buf_item_init xfs_trans_read_buf: bno 0x2 len 0x200 hold 3 recur 0 refcount 1 xfs_trans_log_buf: bno 0x2 len 0x200 hold 3 recur 0 refcount 1 xfs_buf_item_unlock: bno 0x2 len 0x200 hold 3 flags DIRTY liflags ABORTED xfs_buf_unlock: bno 0x2 nblks 0x1 hold 3 caller xfs_buf_item_unlock xfs_buf_rele: bno 0x2 nblks 0x1 hold 3 caller xfs_buf_item_unlock And that is the AGI buffer from cold cache read into memory to transaction abort. You can see at transaction abort the bli is dirty and only has a single reference. The item is not pinned, and it's not in the AIL. Hence the only reference to it is this transaction. The problem is that the xfs_buf_item_unlock() call is dropping the last reference to the xfs_buf_log_item attached to the buffer (which holds a reference to the buffer), but it is not freeing the xfs_buf_log_item. Hence nothing will ever release the buffer, and the unmount hangs waiting for this reference to go away. The fix is simple - xfs_buf_item_unlock needs to detect the last reference going away in this case and free the xfs_buf_log_item to release the reference it holds on the buffer. Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Ben Myers <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2013-01-28xfs: limit speculative prealloc near ENOSPC thresholdsDave Chinner1-0/+9
There is a window on small filesytsems where specualtive preallocation can be larger than that ENOSPC throttling thresholds, resulting in specualtive preallocation trying to reserve more space than there is space available. This causes immediate ENOSPC to be triggered, prealloc to be turned off and flushing to occur. One the next write (i.e. next 4k page), we do exactly the same thing, and so effective drive into synchronous 4k writes by triggering ENOSPC flushing on every page while in the window between the prealloc size and the ENOSPC prealloc throttle threshold. Fix this by checking to see if the prealloc size would consume all free space, and throttle it appropriately to avoid premature ENOSPC... Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2013-01-28xfs: fix _xfs_buf_find oops on blocks beyond the filesystem endDave Chinner1-0/+18
When _xfs_buf_find is passed an out of range address, it will fail to find a relevant struct xfs_perag and oops with a null dereference. This can happen when trying to walk a filesystem with a metadata inode that has a partially corrupted extent map (i.e. the block number returned is corrupt, but is otherwise intact) and we try to read from the corrupted block address. In this case, just fail the lookup. If it is readahead being issued, it will simply not be done, but if it is real read that fails we will get an error being reported. Ideally this case should result in an EFSCORRUPTED error being reported, but we cannot return an error through xfs_buf_read() or xfs_buf_get() so this lookup failure may result in ENOMEM or EIO errors being reported instead. Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]> Reviewed-by: Ben Myers <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2013-01-28xfs: pull up stack_switch check into xfs_bmapi_writeBrian Foster1-3/+3
The stack_switch check currently occurs in __xfs_bmapi_allocate, which means the stack switch only occurs when xfs_bmapi_allocate() is called in a loop. Pull the check up before the loop in xfs_bmapi_write() such that the first iteration of the loop has consistent behavior. Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2013-01-28xfs: Do not return EFSCORRUPTED when filesystem probe finds no XFS magicEric Sandeen1-1/+1
9802182 changed the return value from EWRONGFS (aka EINVAL) to EFSCORRUPTED which doesn't seem to be handled properly by the root filesystem probe. Signed-off-by: Eric Sandeen <[email protected]> Tested-by: Sergei Trofimovich <[email protected]> Reviewed-by: Ben Myers <[email protected]> Signed-off-by: Ben Myers <[email protected]>
2013-01-28usb: host: tegra: make use of PHY pointer of HCDVenu Byravarasu3-22/+29
As pointer to PHY structure can be stored in struct usb_hcd making use of it, to call Tegra PHY APIs. Call to usb_phy_shutdown() is moved up in tegra_ehci_remove(), so that to avoid dereferencing of hcd after its freed up. Signed-off-by: Venu Byravarasu <[email protected]> Acked-by: Alan Stern <[email protected]> Acked-by: Felipe Balbi <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra: Add reset GPIO information to PHY DT nodeVenu Byravarasu6-0/+23
As reset GPIO information is PHY specific detail, adding it to PHY DT node. Signed-off-by: Venu Byravarasu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra: Add initial support for Tegra114 SoC.Hiroshi Doyu4-0/+60
Add new Tegra 114 SoC support. Signed-off-by: Hiroshi Doyu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: dt: tegra114: Add new board, PlutoHiroshi Doyu2-1/+23
Add a new evaluation board, Pluto for Tegra 114 family. Signed-off-by: Hiroshi Doyu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: dt: tegra114: Add new board, DalmoreHiroshi Doyu2-1/+23
Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: dt: tegra114: Add new SoC base, Tegra114 SoCHiroshi Doyu1-0/+114
Initial support for Tegra 114 SoC. This is expected to be included in the board DTS files, Tegra 114 SoC based evaluation board family. Signed-off-by: Hiroshi Doyu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra: fuse: Add chip ID Tegra114 0x35Hiroshi Doyu1-0/+1
Add tegra_chip_id TEGRA114 0x35 Signed-off-by: Hiroshi Doyu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28Merge branch 'for-3.9/scu-base-rework' into for-3.9/soc-t114Stephen Warren12-68/+141
Conflicts: arch/arm/mach-tegra/platsmp.c
2013-01-28ARM: tegra20: cpuidle: apply coupled cpuidle for powered-down modeJoseph Lo5-9/+192
The "powered-down" cpuidle mode of Tegra20 needs the CPU0 be the last one core to go into this mode before other core. The coupled cpuidle framework can help to sync the MPCore to coupled state then go into "powered-down" idle mode together. The driver can just assume the MPCore come into "powered-down" mode at the same time. No need to take care if the CPU_0 goes into this mode along and only can put it into safe idle mode (WFI). The powered-down state of Tegra20 requires power gating both CPU cores. When the secondary CPU requests to enter powered-down state, it saves its own contexts and then enters WFI for waiting CPU0 in the same state. When the CPU0 requests powered-down state, it attempts to put the secondary CPU into reset to prevent it from waking up. Then power down both CPUs together and power off the cpu rail. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Colin Cross <[email protected]> Gary King <[email protected]> Signed-off-by: Joseph Lo <[email protected]> Acked-by: Colin Cross <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra20: flowctrl: add support for cpu_suspend_enter/exitJoseph Lo2-5/+37
The flow controller can help CPU to go into suspend mode (powered-down state). When CPU go into powered-down state, it needs some careful settings before getting into and after leaving. The enter and exit functions do that by configuring appropriate mode for flow controller. Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28clk: tegra20: Implementing CPU low-power function for tegra_cpu_car_opsJoseph Lo1-0/+93
Implementing suspend, resume and rail_off_ready API for tegra_cpu_car_ops. These functions were used for CPU powered-down state maintenance. Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra20: cpuidle: add powered-down state for secondary CPUJoseph Lo4-4/+259
The powered-down state of Tegra20 requires power gating both CPU cores. When the secondary CPU requests to enter powered-down state, it saves its own contexts and then enters WFI. The Tegra20 had a limition to power down both CPU cores. The secondary CPU must waits for CPU0 in powered-down state too. If the secondary CPU be woken up before CPU0 entering powered-down state, then it needs to restore its CPU states and waits for next chance. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Colin Cross <[email protected]> Gary King <[email protected]> Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra: add pending SGI checking APIJoseph Lo2-0/+37
The "powered-down" CPU idle mode of Tegra cut off the vdd_cpu rail, it include the power of GIC. That caused the SGI (Software Generated Interrupt) been lost. Because the SGI can't wake up the CPU that in the "powered-down" CPU idle mode. We need to check if there is any pending SGI when go into "powered-down" CPU idle mode. This is important especially when applying the coupled cpuidle framework into "power-down" cpuidle dirver. Because the coupled cpuidle framework may have the chance that misses IPI_SINGLE_FUNC handling sometimes. For the PPI or SPI, something like the legacy peripheral interrupt. It still can be maintained by Tegra legacy interrupt controller. If there is any pending PPI or SPI when CPU in "powered-down" CPU idle mode. The CPU can be woken up immediately. So we don't need to take care the same situation for PPI or SPI. Signed-off-by: Joseph Lo <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28usb: host: tegra: don't touch EMC clockStephen Warren1-17/+0
Clock "emc" is for the External Memory Controller. The USB driver has no business touching this clock directly. Remove the code that does so. Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28usb: add APIs to access host registers from Tegra PHYVenu Byravarasu3-43/+59
As Tegra PHY driver needs to access one of the host registers, added few APIs. Signed-off-by: Venu Byravarasu <[email protected]> Acked-by: Alan Stern <[email protected]> [swarren: moved assignment of phy->is_ulpi_phy to previous patch.] Signed-off-by: Stephen Warren <[email protected]>
2013-01-28USB: PHY: tegra: Get rid of instance number to differentiate PHY typeVenu Byravarasu2-14/+15
Tegra20 USB has 3 PHY instances: Instance 1 and 3 are UTMI. Instance 2 is ULPI. As instance number was used to differentiate ULPI from UTMI, used DT param to get this info and processed accordingly. Signed-off-by: Venu Byravarasu <[email protected]> Acked-by: Felipe Balbi <[email protected]> [swarren: moved assignment of phy->is_ulpi_phy into this patch out of next patch.] Signed-off-by: Stephen Warren <[email protected]>
2013-01-28USB: PHY: tegra: get rid of instance number to differentiate legacy controllerVenu Byravarasu2-17/+16
Tegra20 USB has 3 PHY instances. Instance 0 is based on legacy PHY interface and other two are standard interfaces. As instance number was used to differentiate legacy from standard interfaces, used DT param to get this info and processed accordingly. Signed-off-by: Venu Byravarasu <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra: add clocks properties to USB PHY nodesStephen Warren1-0/+6
The patch to add USB PHY nodes to device tree was written before Tegra supported the clocks property in device tree. Now that it does, add the required clocks properties to these nodes. This will allow all clk_get_sys() calls in tegra_usb_phy.c to be replaced by clk_get(phy->dev, clock_name), as part of converting the PHY driver to a platform driver. Acked-by: Venu Byravarasu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2013-01-28ARM: tegra: add DT nodes for Tegra USB PHYVenu Byravarasu3-0/+37
Add DT nodes for Tegra USB PHY along with related documentation. Also added a phandle property to controller DT node, for referring to connected PHY instance. Signed-off-by: Venu Byravarasu <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.