aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-30arm64/smp: Move rcu_cpu_starting() earlierQian Cai1-0/+1
The call to rcu_cpu_starting() in secondary_start_kernel() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: WARNING: suspicious RCU usage ----------------------------- kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. Call trace: dump_backtrace+0x0/0x3c8 show_stack+0x14/0x60 dump_stack+0x14c/0x1c4 lockdep_rcu_suspicious+0x134/0x14c __lock_acquire+0x1c30/0x2600 lock_acquire+0x274/0xc48 _raw_spin_lock+0xc8/0x140 vprintk_emit+0x90/0x3d0 vprintk_default+0x34/0x40 vprintk_func+0x378/0x590 printk+0xa8/0xd4 __cpuinfo_store_cpu+0x71c/0x868 cpuinfo_store_cpu+0x2c/0xc8 secondary_start_kernel+0x244/0x318 This is avoided by moving the call to rcu_cpu_starting up near the beginning of the secondary_start_kernel() function. Signed-off-by: Qian Cai <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-10-30vdpasim: allow to assign a MAC addressLaurent Vivier1-1/+13
Add macaddr parameter to the module to set the MAC address to use Signed-off-by: Laurent Vivier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2020-10-30vdpasim: fix MAC address configurationLaurent Vivier1-1/+2
vdpa_sim generates a ramdom MAC address but it is never used by upper layers because the VIRTIO_NET_F_MAC bit is not set in the features list. Because of that, virtio-net always regenerates a random MAC address each time it is loaded whereas the address should only change on vdpa_sim load/unload. Fix that by adding VIRTIO_NET_F_MAC in the features list of vdpa_sim. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Cc: [email protected] Signed-off-by: Laurent Vivier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2020-10-30vdpa: handle irq bypass register failure caseZhu Lingshan1-0/+3
LKP considered variable 'ret' in vhost_vdpa_setup_vq_irq() as a unused variable, so suggest we remove it. Actually it stores return value of irq_bypass_register_producer(), but we did not check it, we should handle the failure case. This commit will print a message if irq bypass register producer fail, in this case, vqs still remain functional. Signed-off-by: Zhu Lingshan <[email protected]> Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2020-10-30vdpa_sim: Fix DMA maskLaurent Vivier1-1/+3
Since commit f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference") an error is reported when we load vdpa_sim and virtio-vdpa: [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 It seems that dma_mask is not initialized. This patch initializes dma_mask() and calls dma_set_mask_and_coherent() to fix the problem. Full log: [ 128.548628] ------------[ cut here ]------------ [ 128.553268] WARNING: CPU: 23 PID: 1105 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x14c/0x1d0 [ 128.562139] Modules linked in: virtio_net net_failover failover virtio_vdpa vdpa_sim vringh vhost_iotlb vdpa xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfkill intel_rapl_msr intel_rapl_common isst_if_common sunrpc skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit irqbypass drm_kms_helper crct10dif_pclmul crc32_pclmul syscopyarea ghash_clmulni_intel iTCO_wdt sysfillrect iTCO_vendor_support sysimgblt rapl fb_sys_fops dcdbas intel_cstate drm acpi_ipmi ipmi_si mei_me dell_smbios intel_uncore ipmi_devintf mei i2c_i801 dell_wmi_descriptor wmi_bmof pcspkr lpc_ich i2c_smbus ipmi_msghandler acpi_power_meter ip_tables xfs libcrc32c sd_mod t10_pi sg ahci libahci libata megaraid_sas tg3 crc32c_intel wmi dm_mirror dm_region_hash dm_log [ 128.562188] dm_mod [ 128.651334] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 128.659939] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 128.667419] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 128.672384] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 128.691131] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 128.696357] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 128.703488] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 128.710620] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 128.717754] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 128.724886] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 128.732020] FS: 00007f887bae23c0(0000) GS:ffff9e4ac01c0000(0000) knlGS:0000000000000000 [ 128.740105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.745852] CR2: 0000562bc09de998 CR3: 00000003c156c006 CR4: 00000000007706e0 [ 128.752982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.760114] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.767247] PKRU: 55555554 [ 128.769961] Call Trace: [ 128.772418] virtqueue_add+0x81e/0xb00 [ 128.776176] virtqueue_add_inbuf_ctx+0x26/0x30 [ 128.780625] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 128.785509] virtnet_open+0xf9/0x180 [virtio_net] [ 128.790217] __dev_open+0xe8/0x180 [ 128.793620] __dev_change_flags+0x1a7/0x210 [ 128.797808] dev_change_flags+0x21/0x60 [ 128.801646] do_setlink+0x328/0x10e0 [ 128.805227] ? __nla_validate_parse+0x121/0x180 [ 128.809757] ? __nla_parse+0x21/0x30 [ 128.813338] ? inet6_validate_link_af+0x5c/0xf0 [ 128.817871] ? cpumask_next+0x17/0x20 [ 128.821535] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 128.826676] ? __nla_validate_parse+0x47/0x180 [ 128.831120] __rtnl_newlink+0x541/0x8e0 [ 128.834962] ? __nla_reserve+0x38/0x50 [ 128.838713] ? security_sock_rcv_skb+0x2a/0x40 [ 128.843158] ? netlink_deliver_tap+0x2c/0x1e0 [ 128.847518] ? netlink_attachskb+0x1d8/0x220 [ 128.851793] ? skb_queue_tail+0x1b/0x50 [ 128.855641] ? fib6_clean_node+0x43/0x170 [ 128.859652] ? _cond_resched+0x15/0x30 [ 128.863406] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 128.868110] rtnl_newlink+0x43/0x60 [ 128.871602] rtnetlink_rcv_msg+0x12c/0x380 [ 128.875701] ? rtnl_calcit.isra.39+0x110/0x110 [ 128.880147] netlink_rcv_skb+0x50/0x100 [ 128.883987] netlink_unicast+0x1a5/0x280 [ 128.887913] netlink_sendmsg+0x23d/0x470 [ 128.891839] sock_sendmsg+0x5b/0x60 [ 128.895331] ____sys_sendmsg+0x1ef/0x260 [ 128.899255] ? copy_msghdr_from_user+0x5c/0x90 [ 128.903702] ___sys_sendmsg+0x7c/0xc0 [ 128.907369] ? dev_forward_change+0x130/0x130 [ 128.911731] ? sysctl_head_finish.part.29+0x24/0x40 [ 128.916616] ? new_sync_write+0x11f/0x1b0 [ 128.920628] ? mntput_no_expire+0x47/0x240 [ 128.924727] __sys_sendmsg+0x57/0xa0 [ 128.928309] do_syscall_64+0x33/0x40 [ 128.931887] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 128.936937] RIP: 0033:0x7f88792e3857 [ 128.940518] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 128.959263] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 128.966827] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 128.973960] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 128.981095] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 128.988224] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 128.995357] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.002492] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 129.011093] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 129.018571] Call Trace: [ 129.021027] dump_stack+0x57/0x6a [ 129.024346] __warn.cold.14+0xe/0x3d [ 129.027925] ? dma_map_page_attrs+0x14c/0x1d0 [ 129.032283] report_bug+0xbd/0xf0 [ 129.035602] handle_bug+0x44/0x80 [ 129.038922] exc_invalid_op+0x13/0x60 [ 129.042589] asm_exc_invalid_op+0x12/0x20 [ 129.046602] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 129.051566] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 129.070311] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 129.075536] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 129.082669] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 129.089803] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 129.096936] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 129.104068] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 129.111200] virtqueue_add+0x81e/0xb00 [ 129.114952] virtqueue_add_inbuf_ctx+0x26/0x30 [ 129.119399] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 129.124280] virtnet_open+0xf9/0x180 [virtio_net] [ 129.128984] __dev_open+0xe8/0x180 [ 129.132390] __dev_change_flags+0x1a7/0x210 [ 129.136575] dev_change_flags+0x21/0x60 [ 129.140415] do_setlink+0x328/0x10e0 [ 129.143994] ? __nla_validate_parse+0x121/0x180 [ 129.148528] ? __nla_parse+0x21/0x30 [ 129.152107] ? inet6_validate_link_af+0x5c/0xf0 [ 129.156639] ? cpumask_next+0x17/0x20 [ 129.160306] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 129.165443] ? __nla_validate_parse+0x47/0x180 [ 129.169890] __rtnl_newlink+0x541/0x8e0 [ 129.173731] ? __nla_reserve+0x38/0x50 [ 129.177483] ? security_sock_rcv_skb+0x2a/0x40 [ 129.181928] ? netlink_deliver_tap+0x2c/0x1e0 [ 129.186286] ? netlink_attachskb+0x1d8/0x220 [ 129.190560] ? skb_queue_tail+0x1b/0x50 [ 129.194401] ? fib6_clean_node+0x43/0x170 [ 129.198411] ? _cond_resched+0x15/0x30 [ 129.202163] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 129.206869] rtnl_newlink+0x43/0x60 [ 129.210361] rtnetlink_rcv_msg+0x12c/0x380 [ 129.214462] ? rtnl_calcit.isra.39+0x110/0x110 [ 129.218908] netlink_rcv_skb+0x50/0x100 [ 129.222747] netlink_unicast+0x1a5/0x280 [ 129.226672] netlink_sendmsg+0x23d/0x470 [ 129.230599] sock_sendmsg+0x5b/0x60 [ 129.234090] ____sys_sendmsg+0x1ef/0x260 [ 129.238015] ? copy_msghdr_from_user+0x5c/0x90 [ 129.242461] ___sys_sendmsg+0x7c/0xc0 [ 129.246128] ? dev_forward_change+0x130/0x130 [ 129.250487] ? sysctl_head_finish.part.29+0x24/0x40 [ 129.255368] ? new_sync_write+0x11f/0x1b0 [ 129.259381] ? mntput_no_expire+0x47/0x240 [ 129.263478] __sys_sendmsg+0x57/0xa0 [ 129.267058] do_syscall_64+0x33/0x40 [ 129.270639] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 129.275689] RIP: 0033:0x7f88792e3857 [ 129.279268] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 129.298015] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 129.305581] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 129.312712] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 129.319846] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 129.326978] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 129.334109] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.341249] ---[ end trace c551e8028fbaf59d ]--- [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.360445] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.824428] net eth0: Unexpected TXQ (0) queue failure: -12 Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Signed-off-by: Laurent Vivier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Cc: [email protected] Acked-by: Jason Wang <[email protected]>
2020-10-30Revert "vhost-vdpa: fix page pinning leakage in error path"Michael S. Tsirkin1-71/+48
This reverts commit 7ed9e3d97c32d969caded2dfb6e67c1a2cc5a0b1. The patch creates a DoS risk since it can result in a high order memory allocation. Fixes: 7ed9e3d97c32d ("vhost-vdpa: fix page pinning leakage in error path") Cc: [email protected] Signed-off-by: Michael S. Tsirkin <[email protected]>
2020-10-30vdpa/mlx5: Fix error return in map_direct_mr()Jing Xiangfeng1-3/+2
Fix to return the variable "err" from the error handling case instead of "ret". Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Signed-off-by: Jing Xiangfeng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Eli Cohen <[email protected]> Cc: [email protected] Acked-by: Jason Wang <[email protected]>
2020-10-30vhost_vdpa: Return -EFAULT if copy_from_user() failsDan Carpenter1-5/+5
The copy_to/from_user() functions return the number of bytes which we weren't able to copy but the ioctl should return -EFAULT if they fail. Fixes: a127c5bbb6a8 ("vhost-vdpa: fix backend feature ioctls") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20201023120853.GI282278@mwanda Signed-off-by: Michael S. Tsirkin <[email protected]> Cc: [email protected] Acked-by: Jason Wang <[email protected]>
2020-10-30debugfs: remove return value of debugfs_create_devm_seqfile()Greg Kroah-Hartman3-19/+16
No one checks the return value of debugfs_create_devm_seqfile(), as it's not needed, so make the return value void, so that no one tries to do so in the future. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-30usb: cdns3: gadget: own the lock wrongly at the suspend routinePeter Chen1-4/+7
When the system goes to suspend, if the controller is at device mode with cable connecting to host, the call stack is: cdns3_suspend-> cdns3_gadget_suspend -> cdns3_disconnect_gadget, after cdns3_disconnect_gadget is called, it owns lock wrongly, it causes the system being deadlock after resume due to at cdns3_device_thread_irq_handler, it tries to get the lock, but can't get it forever. To fix it, we delete the unlock-lock operations at cdns3_disconnect_gadget, and do it at the caller. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Acked-by: Pawel Laszczak <[email protected]> Signed-off-by: Peter Chen <[email protected]>
2020-10-30usb: cdns3: Fix on-chip memory overflow issuePawel Laszczak3-76/+94
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts register. The issue occurred because EP_CFG register was set twice before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING causes that controller increases internal counter holding the number of reserved on-chip buffers. First time this register was updated in function cdns3_ep_config before delegating SET_CONFIGURATION request to class driver and again it was updated when class wanted to enable endpoint. This patch fixes this issue by configuring endpoints enabled by class driver in cdns3_gadget_ep_enable and others just before status stage. Cc: [email protected]#v5.8+ Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-and-tested-by: Peter Chen <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Signed-off-by: Peter Chen <[email protected]>
2020-10-30Merge tag 'drm-intel-fixes-2020-10-29' of ↵Dave Airlie5-2/+84
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix max memory region size calculation (Matt) - Restore ILK-M RPS support, restoring performance (Ville) - Reject 90/270 degreerotated initial fbs (Ville) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30Merge branch 'linux-5.10' of git://github.com/skeggsb/linux into drm-fixesDave Airlie11-68/+145
Fixes an endian regression on older GPUs, a refcount overflow, a migration fix and 3 display fixes. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv6MOjtgzKchpis1XrZYmu7-6CaxnHVzJKOXPH62_em7tw@mail.gmail.com
2020-10-30Merge tag 'drm-misc-fixes-2020-10-29' of ↵Dave Airlie16-64/+82
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes First round of drm-misc-fixes with a couple of leftovers from drm-misc-fixes next. Some reset fixes for the mantix panel, some fixes for a scaler issue on sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio related) Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-30drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()Lyude Paul1-10/+11
While I thought I had this correct (since it actually did reject modes like I expected during testing), Ville Syrjala from Intel pointed out that the logic here isn't correct. max_clock refers to the max data rate supported by the DP encoder. So, limiting it to the output of ds_clock (which refers to the maximum dotclock of the downstream DP device) doesn't make any sense. Additionally, since we're using the connector's bpc as the canonical BPC we should use this in mode_valid until we support dynamically setting the bpp based on bandwidth constraints. https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html For more info. So, let's rewrite this using Ville's advice. v2: * Ville pointed out I mixed up the dotclock and the link rate. So fix that... * ...and also rename all the variables in this function to be more appropriately labeled so I stop mixing them up. * Reuse the bpp from the connector for now until we have dynamic bpp selection. * Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we should also have been doing from the start Signed-off-by: Lyude Paul <[email protected]> Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation") Cc: Ville Syrjälä <[email protected]> Cc: Lyude Paul <[email protected]> Cc: Ben Skeggs <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2020-10-30drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()Lyude Paul2-31/+21
Ville also pointed out that I got a lot of the logic here wrong as well, whoops. While I don't think anyone's likely using 3D output with nouveau, the next patch will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get rid of it and open-code it like before, while taking care to move the 3D frame packing calculations on the dot clock into the right place. Signed-off-by: Lyude Paul <[email protected]> Fixes: d6a9efece724 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST") Cc: Ville Syrjälä <[email protected]> Cc: <[email protected]> # v5.8+ Signed-off-by: Ben Skeggs <[email protected]>
2020-10-30drm/nouveau/device: fix changing endianess code to work on older GPUsKarol Herbst1-13/+26
With this we try to detect if the endianess switch works and assume LE if not. Suggested by Ben. Fixes: 51c05340e407 ("drm/nouveau/device: detect if changing endianness failed") Signed-off-by: Karol Herbst <[email protected]> Cc: <[email protected]> # v5.8+ Signed-off-by: Ben Skeggs <[email protected]>
2020-10-30drm/nouveau/gem: fix "refcount_t: underflow; use-after-free"Karol Herbst1-1/+2
we can't use nouveau_bo_ref here as no ttm object was allocated and nouveau_bo_ref mainly deals with that. Simply deallocate the object. Signed-off-by: Karol Herbst <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2020-10-30drm/nouveau/kms/nv50-: Program notifier offset before requesting disp capsLyude Paul6-5/+85
Not entirely sure why this never came up when I originally tested this (maybe some BIOSes already have this setup?) but the ->caps_init vfunc appears to cause the display engine to throw an exception on driver init, at least on my ThinkPad P72: nouveau 0000:01:00.0: disp: chid 0 mthd 008c data 00000000 0000508c 0000102b This is magic nvidia speak for "You need to have the DMA notifier offset programmed before you can call NV507D_GET_CAPABILITIES." So, let's fix this by doing that, and also perform an update afterwards to prevent racing with the GPU when reading capabilities. v2: * Don't just program the DMA notifier offset, make sure to actually perform an update v3: * Don't call UPDATE() * Actually read the correct notifier fields, as apparently the CAPABILITIES_DONE field lives in a different location than the main NV_DISP_CORE_NOTIFIER_1 field. As well, 907d+ use a different CAPABILITIES_DONE field then pre-907d cards. v4: * Don't forget to check the return value of core507d_read_caps() v5: * Get rid of NV50_DISP_CAPS_NTFY[14], use NV50_DISP_CORE_NTFY * Disable notifier after calling GetCapabilities() Signed-off-by: Lyude Paul <[email protected]> Fixes: 4a2cb4181b07 ("drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support") Cc: <[email protected]> # v5.8+ Signed-off-by: Ben Skeggs <[email protected]>
2020-10-30drm/nouveau/nouveau: fix the start/end range for migrationRalph Campbell1-11/+3
The user level OpenCL code shouldn't have to align start and end addresses to a page boundary. That is better handled in the nouveau driver. The npages field is also redundant since it can be computed from the start and end addresses. Signed-off-by: Ralph Campbell <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2020-10-30Merge tag 'amd-drm-fixes-5.10-2020-10-29' of ↵Dave Airlie13-76/+69
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.10-2020-10-29: amdgpu: - Add new navi1x PCI ID - GPUVM reserved area fixes - Misc display fixes - Fix bad interactions between display code and CONFIG_KGDB - Fixes for SMU manual fan control and i2c Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-29scsi: target: tcmu: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29ima: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29enetc: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29fs: Replace zero-length array with flexible-array memberGustavo A. R. Silva6-10/+10
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29Bluetooth: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29params: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29tracepoint: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29platform/chrome: cros_ec_proto: Replace zero-length array with ↵Gustavo A. R. Silva1-1/+1
flexible-array member There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29platform/chrome: cros_ec_commands: Replace zero-length array with ↵Gustavo A. R. Silva1-7/+7
flexible-array member There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array ↵Gustavo A. R. Silva1-1/+1
member There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29dmaengine: ti-cppi5: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-2/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-10-29soc: ti: ti_sci_pm_domains: check for proper args count in xlateTero Kristo1-1/+1
K2G devices still only use single parameter for power-domains property, so check for this properly in the driver. Without this, every peripheral fails to probe resulting in boot failure. Link: https://lore.kernel.org/r/[email protected] Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one") Reported-by: Nishanth Menon <[email protected]> Signed-off-by: Tero Kristo <[email protected]> Acked-by: Nishanth Menon <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-29KVM: arm64: Force PTE mapping on fault resulting in a device mappingSantosh Shukla1-0/+1
VFIO allows a device driver to resolve a fault by mapping a MMIO range. This can be subsequently result in user_mem_abort() to try and compute a huge mapping based on the MMIO pfn, which is a sure recipe for things to go wrong. Instead, force a PTE mapping when the pfn faulted in has a device mapping. Fixes: 6d674e28f642 ("KVM: arm/arm64: Properly handle faulting of device mappings") Suggested-by: Marc Zyngier <[email protected]> Signed-off-by: Santosh Shukla <[email protected]> [maz: rewritten commit message] Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-10-29KVM: arm64: Use fallback mapping sizes for contiguous huge page sizesGavin Shan1-7/+19
Although huge pages can be created out of multiple contiguous PMDs or PTEs, the corresponding sizes are not supported at Stage-2 yet. Instead of failing the mapping, fall back to the nearer supported mapping size (CONT_PMD to PMD and CONT_PTE to PTE respectively). Suggested-by: Marc Zyngier <[email protected]> Signed-off-by: Gavin Shan <[email protected]> [maz: rewritten commit message] Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-29Merge tag 'fallthrough-fixes-clang-5.10-rc2' of ↵Linus Torvalds2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fix from Gustavo A. R. Silva: "This fixes a ton of fall-through warnings when building with Clang 12.0.0 and -Wimplicit-fallthrough" * tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: include: jhash/signal: Fix fall-through warnings for Clang
2020-10-29Merge tag 'net-5.10-rc2' of ↵Linus Torvalds39-178/+261
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release regressions: - r8169: fix forced threading conflicting with other shared interrupts; we tried to fix the use of raise_softirq_irqoff from an IRQ handler on RT by forcing hard irqs, but this driver shares legacy PCI IRQs so drop the _irqoff() instead - tipc: fix memory leak caused by a recent syzbot report fix to tipc_buf_append() Current release - bugs in new features: - devlink: Unlock on error in dumpit() and fix some error codes - net/smc: fix null pointer dereference in smc_listen_decline() Previous release - regressions: - tcp: Prevent low rmem stalls with SO_RCVLOWAT. - net: protect tcf_block_unbind with block lock - ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering to only send legal frames to the hypervisor was too strict - net: hns3: Clear the CMDQ registers before unmapping BAR region; incorrect cleanup order was leading to a crash - bnxt_en - handful of fixes to fixes: - Send HWRM_FUNC_RESET fw command unconditionally, even if there are PCIe errors being reported - Check abort error state in bnxt_open_nic(). - Invoke cancel_delayed_work_sync() for PFs also. - Fix regression in workqueue cleanup logic in bnxt_remove_one(). - mlxsw: Only advertise link modes supported by both driver and device, after removal of 56G support from the driver 56G was not cleared from advertised modes - net/smc: fix suppressed return code Previous release - always broken: - netem: fix zero division in tabledist, caused by integer overflow - bnxt_en: Re-write PCI BARs after PCI fatal error. - cxgb4: set up filter action after rewrites - net: ipa: command payloads already mapped Misc: - s390/ism: fix incorrect system EID, it's okay to change since it was added in current release - vsock: use ns_capable_noaudit() on socket create to suppress false positive audit messages" * tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) r8169: fix issue with forced threading in combination with shared interrupts netem: fix zero division in tabledist ibmvnic: fix ibmvnic_set_mac mptcp: add missing memory scheduling in the rx path tipc: fix memory leak caused by tipc_buf_append() gtp: fix an use-before-init in gtp_newlink() net: protect tcf_block_unbind with block lock ibmveth: Fix use of ibmveth in a bridge. net/sched: act_mpls: Add softdep on mpls_gso.ko ravb: Fix bit fields checking in ravb_hwtstamp_get() devlink: Unlock on error in dumpit() devlink: Fix some error codes chelsio/chtls: fix memory leaks in CPL handlers chelsio/chtls: fix deadlock issue net: hns3: Clear the CMDQ registers before unmapping BAR region bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally. bnxt_en: Check abort error state in bnxt_open_nic(). bnxt_en: Re-write PCI BARs after PCI fatal error. bnxt_en: Invoke cancel_delayed_work_sync() for PFs also. bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one(). ...
2020-10-29KVM: arm64: Fix masks in stage2_pte_cacheable()Will Deacon1-1/+1
stage2_pte_cacheable() tries to figure out whether the mapping installed in its 'pte' parameter is cacheable or not. Unfortunately, it fails miserably because it extracts the memory attributes from the entry using FIELD_GET(), which returns the attributes shifted down to bit 0, but then compares this with the unshifted value generated by the PAGE_S2_MEMATTR() macro. A direct consequence of this bug is that cache maintenance is silently skipped, which in turn causes 32-bit guests to crash early on when their set/way maintenance is trapped but not emulated correctly. Fix the broken masks by avoiding the use of FIELD_GET() altogether. Fixes: 6d9d2115c480 ("KVM: arm64: Add support for stage-2 map()/unmap() in generic page-table") Reported-by: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Cc: Quentin Perret <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-29KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCRMarc Zyngier2-3/+4
The DBGD{CCINT,SCRext} and DBGVCR register entries in the cp14 array are missing their target register, resulting in all accesses being targetted at the guard sysreg (indexed by __INVALID_SYSREG__). Point the emulation code at the actual register entries. Fixes: bdfb4b389c8d ("arm64: KVM: add trap handlers for AArch32 debug registers") Signed-off-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-10-29KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNTWill Deacon1-1/+1
For consistency with the rest of the stage-2 page-table page allocations (performing using a kvm_mmu_memory_cache), ensure that __GFP_ACCOUNT is included in the GFP flags for the PGD pages. Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Quentin Perret <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-29KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transitionMarc Zyngier1-2/+0
Setting PSTATE.PAN when entering EL2 on nVHE doesn't make much sense as this bit only means something for translation regimes that include EL0. This obviously isn't the case in the nVHE case, so let's drop this setting. Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Vladimir Murzin <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-29KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidationMarc Zyngier1-1/+0
The new calling convention says that pointers coming from the SMCCC interface are turned into their HYP version in the host HVC handler. However, there is still a stray kern_hyp_va() in the TLB invalidation code, which could result in a corrupted pointer. Drop the spurious conversion. Fixes: a071261d9318 ("KVM: arm64: nVHE: Fix pointers during SMCCC convertion") Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-29KVM: arm64: Don't corrupt tpidr_el2 on failed HVC callMarc Zyngier1-7/+16
The hyp-init code starts by stashing a register in TPIDR_EL2 in in order to free a register. This happens no matter if the HVC call is legal or not. Although nothing wrong seems to come out of it, it feels odd to alter the EL2 state for something that eventually returns an error. Instead, use the fact that we know exactly which bits of the __kvm_hyp_init call are non-zero to perform the check with a series of EOR/ROR instructions, combined with a build-time check that the value is the one we expect. Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-29coresight: cti: Initialize dynamic sysfs attributesSuzuki K Poulose1-0/+7
With LOCKDEP enabled, CTI driver triggers the following splat due to uninitialized lock class for dynamically allocated attribute objects. [ 5.372901] coresight etm0: CPU0: ETM v4.0 initialized [ 5.376694] coresight etm1: CPU1: ETM v4.0 initialized [ 5.380785] coresight etm2: CPU2: ETM v4.0 initialized [ 5.385851] coresight etm3: CPU3: ETM v4.0 initialized [ 5.389808] BUG: key ffff00000564a798 has not been registered! [ 5.392456] ------------[ cut here ]------------ [ 5.398195] DEBUG_LOCKS_WARN_ON(1) [ 5.398233] WARNING: CPU: 1 PID: 32 at kernel/locking/lockdep.c:4623 lockdep_init_map_waits+0x14c/0x260 [ 5.406149] Modules linked in: [ 5.415411] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.9.0-12034-gbbe85027ce80 #51 [ 5.418553] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 5.426453] Workqueue: events amba_deferred_retry_func [ 5.433299] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 5.438252] pc : lockdep_init_map_waits+0x14c/0x260 [ 5.444410] lr : lockdep_init_map_waits+0x14c/0x260 [ 5.449007] sp : ffff800012bbb720 ... [ 5.531561] Call trace: [ 5.536847] lockdep_init_map_waits+0x14c/0x260 [ 5.539027] __kernfs_create_file+0xa8/0x1c8 [ 5.543539] sysfs_add_file_mode_ns+0xd0/0x208 [ 5.548054] internal_create_group+0x118/0x3c8 [ 5.552307] internal_create_groups+0x58/0xb8 [ 5.556733] sysfs_create_groups+0x2c/0x38 [ 5.561160] device_add+0x2d8/0x768 [ 5.565148] device_register+0x28/0x38 [ 5.568537] coresight_register+0xf8/0x320 [ 5.572358] cti_probe+0x1b0/0x3f0 ... Fix this by initializing the attributes when they are allocated. Fixes: 3c5597e39812 ("coresight: cti: Add connection information to sysfs") Reported-by: Leo Yan <[email protected]> Tested-by: Leo Yan <[email protected]> Cc: Mike Leach <[email protected]> Cc: Mathieu Poirier <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Cc: stable <[email protected]> Signed-off-by: Mathieu Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-29coresight: Fix uninitialised pointer bug in etm_setup_aux()Mike Leach1-1/+1
Commit [bb1860efc817] changed the sink handling code introducing an uninitialised pointer bug. This results in the default sink selection failing. Prior to commit: static void etm_setup_aux(...) <snip> struct coresight_device *sink; <snip> /* First get the selected sink from user space. */ if (event->attr.config2) { id = (u32)event->attr.config2; sink = coresight_get_sink_by_id(id); } else { sink = coresight_get_enabled_sink(true); } <ctd> *sink always initialised - possibly to NULL which triggers the automatic sink selection. After commit: static void etm_setup_aux(...) <snip> struct coresight_device *sink; <snip> /* First get the selected sink from user space. */ if (event->attr.config2) { id = (u32)event->attr.config2; sink = coresight_get_sink_by_id(id); } <ctd> *sink pointer uninitialised when not providing a sink on the perf command line. This breaks later checks to enable automatic sink selection. Fixes: bb1860efc817 ("coresight: etm: perf: Sink selection using sysfs is deprecated") Signed-off-by: Mike Leach <[email protected]> Signed-off-by: Mathieu Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds13-44/+103
Pull rdma fixes from Jason Gunthorpe: "The good news is people are testing rc1 in the RDMA world - the bad news is testing of the for-next area is not as good as I had hoped, as we really should have caught at least the rdma_connect_locked() issue before now. Notable merge window regressions that didn't get caught/fixed in time for rc1: - Fix in kernel users of rxe, they were broken by the rapid fix to undo the uABI breakage in rxe from another patch - EFA userspace needs to read the GID table but was broken with the new GID table logic - Fix user triggerable deadlock in mlx5 using devlink reload - Fix deadlock in several ULPs using rdma_connect from the CM handler callbacks - Memory leak in qedr" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/qedr: Fix memory leak in iWARP CM RDMA: Add rdma_connect_locked() RDMA/uverbs: Fix false error in query gid IOCTL RDMA/mlx5: Fix devlink deadlock on net namespace deletion RDMA/rxe: Fix small problem in network_type patch
2020-10-29r8169: fix issue with forced threading in combination with shared interruptsHeiner Kallweit1-2/+2
As reported by Serge flag IRQF_NO_THREAD causes an error if the interrupt is actually shared and the other driver(s) don't have this flag set. This situation can occur if a PCI(e) legacy interrupt is used in combination with forced threading. There's no good way to deal with this properly, therefore we have to remove flag IRQF_NO_THREAD. For fixing the original forced threading issue switch to napi_schedule(). Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") Link: https://www.spinics.net/lists/netdev/msg694960.html Reported-by: Serge Belyshev <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Tested-by: Serge Belyshev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-29netem: fix zero division in tabledistAleksandr Nogikh1-1/+8
Currently it is possible to craft a special netlink RTM_NEWQDISC command that can result in jitter being equal to 0x80000000. It is enough to set the 32 bit jitter to 0x02000000 (it will later be multiplied by 2^6) or just set the 64 bit jitter via TCA_NETEM_JITTER64. This causes an overflow during the generation of uniformly distributed numbers in tabledist(), which in turn leads to division by zero (sigma != 0, but sigma * 2 is 0). The related fragment of code needs 32-bit division - see commit 9b0ed89 ("netem: remove unnecessary 64 bit modulus"), so switching to 64 bit is not an option. Fix the issue by keeping the value of jitter within the range that can be adequately handled by tabledist() - [0;INT_MAX]. As negative std deviation makes no sense, take the absolute value of the passed value and cap it at INT_MAX. Inside tabledist(), switch to unsigned 32 bit arithmetic in order to prevent overflows. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Aleksandr Nogikh <[email protected]> Reported-by: [email protected] Acked-by: Stephen Hemminger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-29ibmvnic: fix ibmvnic_set_macLijun Pan1-2/+6
Jakub Kicinski brought up a concern in ibmvnic_set_mac(). ibmvnic_set_mac() does this: ether_addr_copy(adapter->mac_addr, addr->sa_data); if (adapter->state != VNIC_PROBED) rc = __ibmvnic_set_mac(netdev, addr->sa_data); So if state == VNIC_PROBED, the user can assign an invalid address to adapter->mac_addr, and ibmvnic_set_mac() will still return 0. The fix is to validate ethernet address at the beginning of ibmvnic_set_mac(), and move the ether_addr_copy to the case of "adapter->state != VNIC_PROBED". Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Lijun Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-29mptcp: add missing memory scheduling in the rx pathPaolo Abeni1-0/+10
When moving the skbs from the subflow into the msk receive queue, we must schedule there the required amount of memory. Try to borrow the required memory from the subflow, if needed, so that we leverage the existing TCP heuristic. Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/f6143a6193a083574f11b00dbf7b5ad151bc4ff4.1603810630.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.