aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-30btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locksJosef Bacik2-1/+5
When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. There's a report from syzbot probably hitting one of the cases where the bd_mutex and device_list_mutex are taken in the wrong order, however it's not with device replace, like this patch fixes. As there's no reproducer available so far, we can't verify the fix. https://lore.kernel.org/lkml/[email protected]/ dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419 WARNING: possible circular locking dependency detected 5.9.0-rc5-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.0/6878 is trying to acquire lock: ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804 but task is already holding lock: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline] find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #3 (sb_internal#2){.+.+}-{0:0}: percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x234/0x470 fs/super.c:1672 sb_start_intwrite include/linux/fs.h:1690 [inline] start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline] find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __flush_work+0x60e/0xac0 kernel/workqueue.c:3041 wb_shutdown+0x180/0x220 mm/backing-dev.c:355 bdi_unregister+0x174/0x590 mm/backing-dev.c:872 del_gendisk+0x820/0xa10 block/genhd.c:933 loop_remove drivers/block/loop.c:2192 [inline] loop_control_ioctl drivers/block/loop.c:2291 [inline] loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 lo_open+0x19/0xd0 drivers/block/loop.c:1893 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507 blkdev_get fs/block_dev.c:1639 [inline] blkdev_open+0x227/0x300 fs/block_dev.c:1753 do_dentry_open+0x4b9/0x11b0 fs/open.c:817 do_open fs/namei.c:3251 [inline] path_openat+0x1b9a/0x2730 fs/namei.c:3368 do_filp_open+0x17e/0x3c0 fs/namei.c:3395 do_sys_openat2+0x16d/0x420 fs/open.c:1168 do_sys_open fs/open.c:1184 [inline] __do_sys_open fs/open.c:1192 [inline] __se_sys_open fs/open.c:1188 [inline] __x64_sys_open+0x119/0x1c0 fs/open.c:1188 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&bdev->bd_mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(sb_internal#2); lock(&fs_devs->device_list_mutex); lock(&bdev->bd_mutex); *** DEADLOCK *** 3 locks held by syz-executor.0/6878: #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365 #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178 #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 stack backtrace: CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x460027 RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027 RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0 RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460 R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460 Signed-off-by: Josef Bacik <[email protected]> [ add syzbot reference ] Signed-off-by: David Sterba <[email protected]>
2020-09-30ARM: imx6q: Fixup RCU usage for cpuidleUlf Hansson1-1/+3
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat according to below. [6.870684] [<c0db7690>] (_raw_spin_lock) from [<c011f6a4>] (imx6q_enter_wait+0x18/0x9c) [6.878846] [<c011f6a4>] (imx6q_enter_wait) from [<c09abfb0>] (cpuidle_enter_state+0x168/0x5e4) To fix the problem, let's assign the corresponding idlestate->flags the CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit() at the proper point. Reported-by: Dong Aisheng <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-09-30Documentation: PM: Fix a reStructuredText syntax errorYoann Congal1-1/+1
Fix a reStructuredText syntax error in the cpuidle PM admin-guide documentation: the ``...'' quotation marks are parsed as partial ''...'' reStructuredText markup and break the output formatting. This change them to "...". Signed-off-by: Yoann Congal <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-09-30cpufreq: intel_pstate: Fix missing return statementZhang Rui1-0/+1
Fix missing return statement when writing "off" to intel_pstate status sysfs I/F. Fixes: 55671ea3257a ("cpufreq: intel_pstate: Free memory only when turning off") Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-09-30ice: preserve NVM capabilities in safe modeJacob Keller1-22/+27
If the driver initializes in safe mode, it will call ice_set_safe_mode_caps. This results in clearing the capabilities structures, in order to set them up for operating in safe mode, ensuring many features are disabled. This has a side effect of also clearing the capability bits that relate to NVM update. The result is that the device driver will not indicate support for unified update, even if the firmware is capable. Fix this by adding the relevant capability fields to the list of values we preserve. To simplify the code, use a common_cap structure instead of a handful of local variables. To reduce some duplication of the capability name, introduce a couple of macros used to restore the capabilities values from the cached copy. Fixes: de9b277ee032 ("ice: Add support for unified NVM update flow capability") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Brijesh Behera <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-30ice: increase maximum wait time for flash write commandsJacob Keller1-2/+8
The ice driver needs to wait for a firmware response to each command to write a block of data to the scratch area used to update the device firmware. The driver currently waits for up to 1 second for this to be returned. It turns out that firmware might take longer than 1 second to return a completion in some cases. If this happens, the flash update will fail to complete. Fix this by increasing the maximum time that the driver will wait for both writing a block of data, and for activating the new NVM bank. The timeout for an erase command is already several minutes, as the firmware had to erase the entire bank which was already expected to take a minute or more in the worst case. In the case where firmware really won't respond, we will now take longer to fail. However, this ensures that if the firmware is simply slow to respond, the flash update can still complete. This new maximum timeout should not adversely increase the update time, as the implementation for wait_event_interruptible_timeout, and should wake very soon after we get a completion event. It is better for a flash update be slow but still succeed than to fail because we gave up too quickly. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Brijesh Behera <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-30vhost vdpa: fix vhost_vdpa_open error handlingMike Christie1-0/+1
We must free the vqs array in the open failure path, because vhost_vdpa_release will not be called. Signed-off-by: Mike Christie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2020-09-30drm: drm_dsc.h: fix a kernel-doc markupMauro Carvalho Chehab1-1/+1
As warned by Sphinx: ./Documentation/gpu/drm-kms-helpers:305: ./include/drm/drm_dsc.h:587: WARNING: Unparseable C cross-reference: 'struct' Invalid C declaration: Expected identifier in nested name, got keyword: struct [error at 6] struct ------^ The markup for one struct is wrong, as struct is used twice. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/3d467022325e15bba8dcb13da8fb730099303266.1601467849.git.mchehab+huawei@kernel.org
2020-09-30Partially revert "video: fbdev: amba-clcd: Retire elder CLCD driver"Peter Collingbourne6-0/+1389
Also partially revert the follow-up change "drm: pl111: Absorb the external register header". This reverts the parts of commits 7e4e589db76a3cf4c1f534eb5a09cc6422766b93 and 0fb8125635e8eb5483fb095f98dcf0651206a7b8 that touch paths outside of drivers/gpu/drm/pl111. The fbdev driver is used by Android's FVP configuration. Using the DRM driver together with DRM's fbdev emulation results in a failure to boot Android. The root cause is that Android's generic fbdev userspace driver relies on the ability to set the pixel format via FBIOPUT_VSCREENINFO, which is not supported by fbdev emulation. There have been other less critical behavioral differences identified between the fbdev driver and the DRM driver with fbdev emulation. The DRM driver exposes different values for the panel's width, height and refresh rate, and the DRM driver fails a FBIOPUT_VSCREENINFO syscall with yres_virtual greater than the maximum supported value instead of letting the syscall succeed and setting yres_virtual based on yres. Signed-off-by: Peter Collingbourne <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-30drm/amdgpu: disable gfxoff temporarily for navy_flounderJiansong Chen1-0/+3
gfxoff is temporarily disabled for navy_flounder, since at present the feature caused some tdr when performing display operations. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-30drm/amd/pm: setup APU dpm clock table in SMU HW initializationEvan Quan1-11/+11
As the dpm clock table is needed during DC HW initialization. And that (DC HW initialization) comes before smu_late_init() where current APU dpm clock table setup is performed. So, NULL pointer dereference will be triggered. By moving APU dpm clock table setup to smu_hw_init(), this can be avoided. Fixes: 02cf91c113ea ("drm/amd/powerplay: postpone operations not required for hw setup to late_init") Acked-by: Nirmoy Das <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Evan Quan <[email protected]> Reported-by: Dirk Gouders <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-30Merge tag 'gpio-fixes-for-v5.9' of ↵Linus Walleij1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.9 - correct logic of GPIO_LINE_DIRECTION in gpio-amd-fch
2020-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller7-8/+28
Alexei Starovoitov says: ==================== pull-request: bpf 2020-09-29 The following pull-request contains BPF updates for your *net* tree. We've added 7 non-merge commits during the last 14 day(s) which contain a total of 7 files changed, 28 insertions(+), 8 deletions(-). The main changes are: 1) fix xdp loading regression in libbpf for old kernels, from Andrii. 2) Do not discard packet when NETDEV_TX_BUSY, from Magnus. 3) Fix corner cases in libbpf related to endianness and kconfig, from Tony. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-09-30x86/mce: Use idtentry_nmi_enter/exit()Thomas Gleixner1-2/+4
The recent fix for NMI vs. IRQ state tracking missed to apply the cure to the MCE handler. Fixes: ba1f2b2eaa2a ("x86/entry: Fix NMI vs IRQ state tracking") Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-09-29clocksource: clint: Export clint_time_val for modulesPalmer Dabbelt1-0/+1
clint_time_val will soon be used by the RISC-V implementation of random_get_entropy(), which is a static inline function that may be used by modules (at least CRYPTO_JITTERENTROPY=m). Reported-by: kernel test robot <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-09-30x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule listTony Luck1-4/+0
Way back in v3.19 Intel and AMD shared the same machine check severity grading code. So it made sense to add a case for AMD DEFERRED errors in commit e3480271f592 ("x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error") But later in v4.2 AMD switched to a separate grading function in commit bf80bbd7dcf5 ("x86/mce: Add an AMD severities-grading function") Belatedly drop the DEFERRED case from the Intel rule list. Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-09-30x86/mce: Add Skylake quirk for patrol scrub reported errorsBorislav Petkov1-2/+26
The patrol scrubber in Skylake and Cascade Lake systems can be configured to report uncorrected errors using a special signature in the machine check bank and to signal using CMCI instead of machine check. Update the severity calculation mechanism to allow specifying the model, minimum stepping and range of machine check bank numbers. Add a new rule to detect the special signature (on model 0x55, stepping >=4 in any of the memory controller banks). [ bp: Rewrite it. aegl: Productize it. ] Suggested-by: Youquan Song <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Co-developed-by: Tony Luck <[email protected]> Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-09-30Merge branch 'vmwgfx-fixes-5.9' of ↵Dave Airlie2-2/+2
git://people.freedesktop.org/~sroland/linux into drm-fixes One vmwgfx regression fix. Signed-off-by: Dave Airlie <[email protected]> From: "Roland Scheidegger (VMware)" <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-09-30drm/vmwgfx: Fix error handling in get_nodeZack Rusin2-2/+2
ttm_mem_type_manager_func.get_node was changed to return -ENOSPC instead of setting the node pointer to NULL. Unfortunately vmwgfx still had two places where it was explicitly converting -ENOSPC to 0 causing regressions. This fixes those spots by allowing -ENOSPC to be returned. That seems to fix recent regressions with vmwgfx. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]> Reviewed-by: Martin Krastev <[email protected]> Sigend-off-by: Roland Scheidegger <[email protected]>
2020-09-29scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()Mark Mielke1-7/+15
The kernel may fail to boot or devices may fail to come up when initializing iscsi_tcp devices starting with Linux 5.8. Commit a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") introduced getpeername() within the session spinlock. Commit 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") introduced BPF_CGROUP_RUN_SA_PROG_LOCK() within getpeername(), which acquires a mutex and when used from iscsi_tcp devices can now lead to "BUG: scheduling while atomic:" and subsequent damage. Ensure that the spinlock is released before calling getpeername() or getsockname(). sock_hold() and sock_put() are used to ensure that the socket reference is preserved until after the getpeername() or getsockname() complete. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1877345 Link: https://lkml.org/lkml/2020/7/28/1085 Link: https://lkml.org/lkml/2020/8/31/459 Link: https://lore.kernel.org/r/[email protected] Fixes: a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") Fixes: 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") Cc: [email protected] Reported-by: Marc Dionne <[email protected]> Tested-by: Marc Dionne <[email protected]> Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Mark Mielke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-09-29Merge branch 'mptcp-Fix-for-32-bit-DATA_FIN'David S. Miller4-13/+24
Mat Martineau says: ==================== mptcp: Fix for 32-bit DATA_FIN The main fix is contained in patch 2, and that commit message explains the issue with not properly converting truncated DATA_FIN sequence numbers sent by the peer. With patch 2 adding an unlocked read of msk->ack_seq, patch 1 cleans up access to that data with READ_ONCE/WRITE_ONCE. This does introduce two merge conflicts with net-next, but both have straightforward resolution. Patch 1 modifies a line that got removed in net-next so the modification can be dropped when merging. Patch 2 will require a trivial conflict resolution for a modified function declaration. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-09-29mptcp: Handle incoming 32-bit DATA_FIN valuesMat Martineau3-7/+18
The peer may send a DATA_FIN mapping with either a 32-bit or 64-bit sequence number. When a 32-bit sequence number is received for the DATA_FIN, it must be expanded to 64 bits before comparing it to the last acked sequence number. This expansion was missing. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/93 Fixes: 3721b9b64676 ("mptcp: Track received DATA_FIN sequence number and add related helpers") Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29mptcp: Consistently use READ_ONCE/WRITE_ONCE with msk->ack_seqMat Martineau2-6/+6
The msk->ack_seq value is sometimes read without the msk lock held, so make proper use of READ_ONCE and WRITE_ONCE. Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29Merge tag 'devicetree-fixes-for-5.9-3' of ↵Linus Torvalds7-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix handling of HOST_EXTRACFLAGS for dtc - Several warning fixes for DT bindings * tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting dt-bindings: Fix 'reg' size issues in zynqmp examples ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding dt-bindings: crypto: sa2ul: fix a DT binding check warning
2020-09-29autofs: use __kernel_write() for the autofs pipe writingLinus Torvalds2-1/+9
autofs got broken in some configurations by commit 13c164b1a186 ("autofs: switch to kernel_write") because there is now an extra LSM permission check done by security_file_permission() in rw_verify_area(). autofs is one if the few places that really does want the much more limited __kernel_write(), because the write is an internal kernel one that shouldn't do any user permission checks (it also doesn't need the file_start_write/file_end_write logic, since it's just a pipe). There are a couple of other cases like that - accounting, core dumping, and splice - but autofs stands out because it can be built as a module. As a result, we need to export this internal __kernel_write() function again. We really don't want any other module to use this, but we don't have a "EXPORT_SYMBOL_FOR_AUTOFS_ONLY()". But we can mark it GPL-only to at least approximate that "internal use only" for licensing. While in this area, make autofs pass in NULL for the file position pointer, since it's always a pipe, and we now use a NULL file pointer for streaming file descriptors (see file_ppos() and commit 438ab720c675: "vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files") This effectively reverts commits 9db977522449 ("fs: unexport __kernel_write") and 13c164b1a186 ("autofs: switch to kernel_write"). Fixes: 13c164b1a186 ("autofs: switch to kernel_write") Reported-by: Ondrej Mosnacek <[email protected]> Acked-by: Christoph Hellwig <[email protected]> Acked-by: Acked-by: Ian Kent <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-09-29Merge branch 'via-rhine-Resume-fix-and-other-maintenance-work'David S. Miller2-18/+6
Kevin Brace says: ==================== via-rhine: Resume fix and other maintenance work I use via-rhine based Ethernet regularly, and the Ethernet dying after resume was really annoying me. I decided to take the matter into my own hands, and came up with a fix for the Ethernet disappearing after resume. I will also want to take over the code maintenance work for via-rhine. The patches apply to the latest code, but they should be backported to older kernels as well. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-09-29via-rhine: New device driver maintainerKevin Brace2-2/+3
Signed-off-by: Kevin Brace <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29via-rhine: Eliminate version informationKevin Brace1-15/+0
Signed-off-by: Kevin Brace <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29via-rhine: VTunknown1 device is really VT8251 South BridgeKevin Brace1-1/+1
The VIA Technologies VT8251 South Bridge's integrated Rhine-II Ethernet MAC comes has a PCI revision value of 0x7c. This was verified on ASUS P5V800-VM mainboard. Signed-off-by: Kevin Brace <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29via-rhine: Fix for the hardware having a reset failure after resumeKevin Brace1-0/+2
In rhine_resume() and rhine_suspend(), the code calls netif_running() to see if the network interface is down or not. If it is down (i.e., netif_running() returning false), they will skip any housekeeping work within the function relating to the hardware. This becomes a problem when the hardware resumes from a standby since it is counting on rhine_resume() to map its MMIO and power up rest of the hardware. Not getting its MMIO remapped and rest of the hardware powered up lead to a soft reset failure and hardware disappearance. The solution is to map its MMIO and power up rest of the hardware inside rhine_open() before soft reset is to be performed. This solution was verified on ASUS P5V800-VM mainboard's integrated Rhine-II Ethernet MAC inside VIA Technologies VT8251 South Bridge. Signed-off-by: Kevin Brace <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29MAINTAINERS: Update MAINTAINERS for Intel ethernet driversTony Nguyen1-1/+2
Add Jesse Brandeburg and myself; remove Jeff Kirsher. CC: Jeff Kirsher <[email protected]> CC: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()Dirk Gouders1-1/+0
Commit 78fe9f63947a2b ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions") added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver. That field is initialized prior to the if-statement, already. Fixes: 78fe9f63947a2b (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions) Signed-off-by: Dirk Gouders <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Sung Lee <[email protected]> Cc: Yongqiang Sun <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-29drm/amdgpu/swsmu/smu12: fix force clock handling for mclkAlex Deucher1-3/+5
The state array is in the reverse order compared to other asics (high to low rather than low to high). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313 Reviewed-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-29drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_configJean Delvare1-1/+1
A recent attempt to fix a ref count leak in amdgpu_display_crtc_set_config() turned out to be doing too much and "fixed" an intended decrease as if it were a leak. Undo that part to restore the proper balance. This is the very nature of this function to increase or decrease the power reference count depending on the situation. Consequences of this bug is that the power reference would eventually get down to 0 while the display was still in use, resulting in that display switching off unexpectedly. Signed-off-by: Jean Delvare <[email protected]> Fixes: e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config") Cc: [email protected] Cc: Navid Emamdoost <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-29drm/amdgpu/display: fix CFLAGS setup for DCN30Alex Deucher1-2/+16
Properly handle clang and older versions of gcc. Fixes: e77165bf7b02a3 ("drm/amd/display: Add DCN3 blocks to Makefile") Acked-by: Nirmoy Das <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-29drm/amd/display: fix return value check for hdcp_workFlora Cui1-1/+1
max_caps might be 0, thus hdcp_work might be ZERO_SIZE_PTR Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-29drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc.Jiansong Chen1-8/+2
Remove gpu_info fw support for sienna_cichlid etc., since the information can be retrieved from discovery binary. Signed-off-by: Jiansong Chen <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-29drm/amd/pm: Removed fixed clock in auto mode DPMSudheesh Mavila1-4/+6
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM. Suggested-by: Evan Quan <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Sudheesh Mavila <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-29scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwritingUwe Kleine-König1-1/+1
When building with $ HOST_EXTRACFLAGS=-g make the expectation is that host tools are built with debug informations. This however doesn't happen if the Makefile assigns a new value to the HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for the first assignment. Fixes: e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile") Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-09-29dt-bindings: Fix 'reg' size issues in zynqmp examplesRob Herring2-5/+5
The default sizes in examples for 'reg' are 1 cell each. Fix the incorrect sizes in zynqmp examples: Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml Cc: Hyun Kwon <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Vinod Koul <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Michal Simek <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-09-29Merge branch 'More-incorrect-VCAP-offsets-for-mscc_ocelot-switch'David S. Miller2-7/+7
Vladimir Oltean says: ==================== More incorrect VCAP offsets for mscc_ocelot switch This small series fixes some wrong tc-flower action fields in the Seville and Felix DSA drivers. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-09-29net: dsa: seville: fix VCAP IS2 action widthVladimir Oltean1-1/+1
Since the actions are packed together in the action RAM, an incorrect action width means that no action except the first one would behave correctly. The tc-flower offload has probably not been tested on this hardware since its introduction. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29net: dsa: felix: fix incorrect action offsets for VCAP IS2Vladimir Oltean1-6/+6
The port mask width was larger than the actual number of ports, and therefore, all fields following this one were also shifted by the number of excess bits. But the driver doesn't use the REW_OP, SMAC_REPLACE_ENA or ACL_ID bits from the action vector, so the bug was inconsequential. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29net: phy: realtek: fix rtl8211e rx/tx delay configWilly Liu1-15/+16
There are two chip pins named TXDLY and RXDLY which actually adds the 2ns delays to TXC and RXC for TXD/RXD latching. These two pins can config via 4.7k-ohm resistor to 3.3V hw setting, but also config via software setting (extension page 0xa4 register 0x1c bit13 12 and 11). The configuration register definitions from table 13 official PHY datasheet: PHYAD[2:0] = PHY Address AN[1:0] = Auto-Negotiation Mode = Interface Mode Select RX Delay = RX Delay TX Delay = TX Delay SELRGV = RGMII/GMII Selection This table describes how to config these hw pins via external pull-high or pull- low resistor. It is a misunderstanding that mapping it as register bits below: 8:6 = PHY Address 5:4 = Auto-Negotiation 3 = Interface Mode Select 2 = RX Delay 1 = TX Delay 0 = SELRGV So I removed these descriptions above and add related settings as below: 14 = reserved 13 = force Tx RX Delay controlled by bit12 bit11 12 = Tx Delay 11 = Rx Delay 10:0 = Test && debug settings reserved by realtek Test && debug settings are not recommend to modify by default. Fixes: f81dadbcf7fd ("net: phy: realtek: Add rtl8211e rx/tx delays config") Signed-off-by: Willy Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29virtio-net: don't disable guest csum when disable LROTonghao Zhang1-1/+7
Open vSwitch and Linux bridge will disable LRO of the interface when this interface added to them. Now when disable the LRO, the virtio-net csum is disable too. That drops the forwarding performance. Fixes: a02e8964eaf9 ("virtio-net: ethtool configurable LRO") Cc: Michael S. Tsirkin <[email protected]> Cc: Jason Wang <[email protected]> Cc: Willem de Bruijn <[email protected]> Signed-off-by: Tonghao Zhang <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-29Merge tag 'dmaengine-fix-5.9' of ↵Linus Torvalds1-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fix from Vinod Koul: "Fix dmatest for misconfigured channel" * tag 'dmaengine-fix-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: dmatest: Prevent to run on misconfigured channel
2020-09-29Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-16/+18
Pull virtio fixes from Michael Tsirkin: "A couple of last minute fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: fix backend feature ioctls vhost: Fix documentation
2020-09-29ftrace: Move RCU is watching check after recursion checkSteven Rostedt (VMware)1-4/+2
The first thing that the ftrace function callback helper functions should do is to check for recursion. Peter Zijlstra found that when "rcu_is_watching()" had its notrace removed, it caused perf function tracing to crash. This is because the call of rcu_is_watching() is tested before function recursion is checked and and if it is traced, it will cause an infinite recursion loop. rcu_is_watching() should still stay notrace, but to prevent this should never had crashed in the first place. The recursion prevention must be the first thing done in callback functions. Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Cc: Paul McKenney <[email protected]> Fixes: c68c0fa293417 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too") Acked-by: Peter Zijlstra (Intel) <[email protected]> Reported-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-09-29tracing: Fix trace_find_next_entry() accounting of temp buffer sizeSteven Rostedt (VMware)1-4/+6
The temp buffer size variable for trace_find_next_entry() was incorrectly being updated when the size did not change. The temp buffer size should only be updated when it is reallocated. This is mostly an issue when used with ftrace_dump(). That's because ftrace_dump() can not allocate a new buffer, and instead uses a temporary buffer with a fix size. But the variable that keeps track of that size is incorrectly updated with each call, and it could fall into the path that would try to reallocate the buffer and produce a warning. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1601 at kernel/trace/trace.c:3548 trace_find_next_entry+0xd0/0xe0 Modules linked in [..] CPU: 1 PID: 1601 Comm: bash Not tainted 5.9.0-rc5-test+ #521 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:trace_find_next_entry+0xd0/0xe0 Code: 40 21 00 00 4c 89 e1 31 d2 4c 89 ee 48 89 df e8 c6 9e ff ff 89 ab 54 21 00 00 5b 5d 41 5c 41 5d c3 48 63 d5 eb bf 31 c0 eb f0 <0f> 0b 48 63 d5 eb b4 66 0f 1f 84 00 00 00 00 00 53 48 8d 8f 60 21 RSP: 0018:ffff95a4f2e8bd70 EFLAGS: 00010046 RAX: ffffffff96679fc0 RBX: ffffffff97910de0 RCX: ffffffff96679fc0 RDX: ffff95a4f2e8bd98 RSI: ffff95a4ee321098 RDI: ffffffff97913000 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000046 R12: ffff95a4f2e8bd98 R13: 0000000000000000 R14: ffff95a4ee321098 R15: 00000000009aa301 FS: 00007f8565484740(0000) GS:ffff95a55aa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055876bd43d90 CR3: 00000000b76e6003 CR4: 00000000001706e0 Call Trace: trace_print_lat_context+0x58/0x2d0 ? cpumask_next+0x16/0x20 print_trace_line+0x1a4/0x4f0 ftrace_dump.cold+0xad/0x12c __handle_sysrq.cold+0x51/0x126 write_sysrq_trigger+0x3f/0x4a proc_reg_write+0x53/0x80 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f8565579487 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffd40707948 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f8565579487 RDX: 0000000000000002 RSI: 000055876bd74de0 RDI: 0000000000000001 RBP: 000055876bd74de0 R08: 000000000000000a R09: 0000000000000001 R10: 000055876bdec280 R11: 0000000000000246 R12: 0000000000000002 R13: 00007f856564a500 R14: 0000000000000002 R15: 00007f856564a700 irq event stamp: 109958 ---[ end trace 7aab5b7e51484b00 ]--- Not only fix the updating of the temp buffer, but also do not free the temp buffer before a new buffer is allocated (there's no reason to not continue to use the current temp buffer if an allocation fails). Cc: [email protected] Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic") Reported-by: Anna-Maria Behnsen <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-09-29Merge tag 'phy-fixes-2-5.9' of ↵Greg Kroah-Hartman1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-linus Vinod writes: phy: Second round of fixes for 5.9 *) Fix of leak in TI phy driver * tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: ti: am654: Fix a leak in serdes_am654_probe()
Powered by cgit, Gruvboxed by Blaster4385.