Age | Commit message (Collapse) | Author | Files | Lines |
|
Dan reported that rt_mutex_adjust_prio_chain() can be called with
.orig_waiter == NULL however commit a055fcc132d4 ("locking/rtmutex: Return
success on deadlock for ww_mutex waiters") unconditionally dereferences it.
Since both call-sites that have .orig_waiter == NULL don't care for the
return value, simply disable the deadlock squash by adding the NULL check.
Notably, both callers use the deadlock condition as a termination condition
for the iteration; once detected, it is sure that (de)boosting is done.
Arguably step [3] would be a more natural termination point, but it's
dubious whether adding a third deadlock detection state would improve the
code.
Fixes: a055fcc132d4 ("locking/rtmutex: Return success on deadlock for ww_mutex waiters")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.
Signed-off-by: Yu-Tung Chang <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
m68k, mips, s390, and sparc allmodconfig images fail to build with the
following error.
drivers/input/joystick/analog.c:160:2: error:
#warning Precise timer not defined for this architecture.
Remove architecture specific time handling code and always use ktime
functions to determine time deltas. Also remove the now useless use_ktime
kernel parameter.
Signed-off-by: Guenter Roeck <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The FSCTL definitions are in smbfsctl.h which should be
shared by client and server. Move the updated version of
smbfsctl.h into smbfs_common and have the client code use
it (subsequent patch will change the server to use this
common version of the header).
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
As we move to common code between client and server, we have
been asked to make the names less confusing, and refer less
to "cifs" and more to words which include "smb" instead to
e.g. "smbfs" for the client (we already have "ksmbd" for the
kernel server, and "smbd" for the user space Samba daemon).
So to be more consistent in the naming of common code between
client and server and reduce the risk of merge conflicts as
more common code is added - rename "cifs_common" to
"smbfs_common" (in future releases we also will rename
the fs/cifs directory to fs/smbfs)
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Add some missing defines used by ksmbd to the client
version of smbfsctl.h, and add a missing newer define
mentioned in the protocol definitions (MS-FSCC).
This will also make it easier to move to common code.
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next-fixes for v5.15:
- Fix ttm_bo_move_memcpy() when ttm_resource is subclassed.
- Small fixes to panfrost, mgag200, vc4.
- Small ttm compilation fixes.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.15-2021-09-01:
amdgpu:
- Misc cleanups, typo fixes
- EEPROM fix
- Add some new PCI IDs
- Scatter/Gather display support for Yellow Carp
- PCIe DPM fix for RKL platforms
- RAS fix
amdkfd:
- SVM fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We check for the func with an OR condition, which means it always ends
up being false and we never match the task_work we want to cancel. In
the unexpected case that we do exit with that pending, we can trigger
a hang waiting for a worker to exit, but it was never created. syzbot
reports that as such:
INFO: task syz-executor687:8514 blocked for more than 143 seconds.
Not tainted 5.14.0-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor687 state:D stack:27296 pid: 8514 ppid: 8479 flags:0x00024004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0x940/0x26f0 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_timeout+0x1db/0x2a0 kernel/time/timer.c:1857
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x176/0x280 kernel/sched/completion.c:138
io_wq_exit_workers fs/io-wq.c:1162 [inline]
io_wq_put_and_exit+0x40c/0xc70 fs/io-wq.c:1197
io_uring_clean_tctx fs/io_uring.c:9607 [inline]
io_uring_cancel_generic+0x5fe/0x740 fs/io_uring.c:9687
io_uring_files_cancel include/linux/io_uring.h:16 [inline]
do_exit+0x265/0x2a30 kernel/exit.c:780
do_group_exit+0x125/0x310 kernel/exit.c:922
get_signal+0x47f/0x2160 kernel/signal.c:2868
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x445cd9
RSP: 002b:00007fc657f4b308 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00000000004cb448 RCX: 0000000000445cd9
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004cb44c
RBP: 00000000004cb440 R08: 000000000000000e R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049b154
R13: 0000000000000003 R14: 00007fc657f4b400 R15: 0000000000022000
While in there, also decrement accr->nr_workers. This isn't strictly
needed as we're exiting, but let's make sure the accounting matches up.
Fixes: 3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Reported-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Merge yet more updates and hotfixes from Andrew Morton:
"Post-linux-next material, based upon latest upstream to catch the
now-merged dependencies:
- 10 patches.
Subsystems affected by this patch series: mm (vmstat and migration)
and compat.
And bunch of hotfixes, mostly cc:stable:
- 8 patches.
Subsystems affected by this patch series: mm (hmm, hugetlb, vmscan,
pagealloc, pagemap, kmemleak, mempolicy, and memblock)"
* emailed patches from Andrew Morton <[email protected]>:
arch: remove compat_alloc_user_space
compat: remove some compat entry points
mm: simplify compat numa syscalls
mm: simplify compat_sys_move_pages
kexec: avoid compat_alloc_user_space
kexec: move locking into do_kexec_load
mm: migrate: change to use bool type for 'page_was_mapped'
mm: migrate: fix the incorrect function name in comments
mm: migrate: introduce a local variable to get the number of pages
mm/vmstat: protect per cpu variables with preempt disable on RT
* emailed hotfixes from Andrew Morton <[email protected]>:
nds32/setup: remove unused memblock_region variable in setup_memory()
mm/mempolicy: fix a race between offset_il_node and mpol_rebind_task
mm/kmemleak: allow __GFP_NOLOCKDEP passed to kmemleak's gfp
mmap_lock: change trace and locking order
mm/page_alloc.c: avoid accessing uninitialized pcp page migratetype
mm,vmscan: fix divide by zero in get_scan_count
mm/hugetlb: initialize hugetlb_usage in mm_init
mm/hmm: bypass devmap pte when all pfn requested flags are fulfilled
|
|
kernel test robot reports unused variable warning:
arch/nds32/kernel/setup.c:247:26: warning: Unused variable: region
[unusedVariable]
struct memblock_region *region;
^
Remove the unused variable.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Vincent Chen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Servers happened below panic:
Kernel version:5.4.56
BUG: unable to handle page fault for address: 0000000000002c48
RIP: 0010:__next_zones_zonelist+0x1d/0x40
Call Trace:
__alloc_pages_nodemask+0x277/0x310
alloc_page_interleave+0x13/0x70
handle_mm_fault+0xf99/0x1390
__do_page_fault+0x288/0x500
do_page_fault+0x30/0x110
page_fault+0x3e/0x50
The reason for the panic is that MAX_NUMNODES is passed in the third
parameter in __alloc_pages_nodemask(preferred_nid). So access to
zonelist->zoneref->zone_idx in __next_zones_zonelist will cause a panic.
In offset_il_node(), first_node() returns nid from pol->v.nodes, after
this other threads may chang pol->v.nodes before next_node(). This race
condition will let next_node return MAX_NUMNODES. So put pol->nodes in
a local variable.
The race condition is between offset_il_node and cpuset_change_task_nodemask:
CPU0: CPU1:
alloc_pages_vma()
interleave_nid(pol,)
offset_il_node(pol,)
first_node(pol->v.nodes) cpuset_change_task_nodemask
//nodes==0xc mpol_rebind_task
mpol_rebind_policy
mpol_rebind_nodemask(pol,nodes)
//nodes==0x3
next_node(nid, pol->v.nodes)//return MAX_NUMNODES
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: yanghui <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In a memory pressure situation, I'm seeing the lockdep WARNING below.
Actually, this is similar to a known false positive which is already
addressed by commit 6dcde60efd94 ("xfs: more lockdep whackamole with
kmem_alloc*").
This warning still persists because it's not from kmalloc() itself but
from an allocation for kmemleak object. While kmalloc() itself suppress
the warning with __GFP_NOLOCKDEP, gfp_kmemleak_mask() is dropping the
flag for the kmemleak's allocation.
Allow __GFP_NOLOCKDEP to be passed to kmemleak's allocation, so that the
warning for it is also suppressed.
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc7-BTRFS-ZNS+ #37 Not tainted
------------------------------------------------------
kswapd0/288 is trying to acquire lock:
ffff88825ab45df0 (&xfs_nondir_ilock_class){++++}-{3:3}, at: xfs_ilock+0x8a/0x250
but task is already holding lock:
ffffffff848cc1e0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x112/0x160
kmem_cache_alloc+0x48/0x400
create_object.isra.0+0x42/0xb10
kmemleak_alloc+0x48/0x80
__kmalloc+0x228/0x440
kmem_alloc+0xd3/0x2b0
kmem_alloc_large+0x5a/0x1c0
xfs_attr_copy_value+0x112/0x190
xfs_attr_shortform_getvalue+0x1fc/0x300
xfs_attr_get_ilocked+0x125/0x170
xfs_attr_get+0x329/0x450
xfs_get_acl+0x18d/0x430
get_acl.part.0+0xb6/0x1e0
posix_acl_xattr_get+0x13a/0x230
vfs_getxattr+0x21d/0x270
getxattr+0x126/0x310
__x64_sys_fgetxattr+0x1a6/0x2a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&xfs_nondir_ilock_class){++++}-{3:3}:
__lock_acquire+0x2c0f/0x5a00
lock_acquire+0x1a1/0x4b0
down_read_nested+0x50/0x90
xfs_ilock+0x8a/0x250
xfs_can_free_eofblocks+0x34f/0x570
xfs_inactive+0x411/0x520
xfs_fs_destroy_inode+0x2c8/0x710
destroy_inode+0xc5/0x1a0
evict+0x444/0x620
dispose_list+0xfe/0x1c0
prune_icache_sb+0xdc/0x160
super_cache_scan+0x31e/0x510
do_shrink_slab+0x337/0x8e0
shrink_slab+0x362/0x5c0
shrink_node+0x7a7/0x1a40
balance_pgdat+0x64e/0xfe0
kswapd+0x590/0xa80
kthread+0x38c/0x460
ret_from_fork+0x22/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);
lock(fs_reclaim);
lock(&xfs_nondir_ilock_class);
*** DEADLOCK ***
3 locks held by kswapd0/288:
#0: ffffffff848cc1e0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
#1: ffffffff848a08d8 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x269/0x5c0
#2: ffff8881a7a820e8 (&type->s_umount_key#60){++++}-{3:3}, at: super_cache_scan+0x5a/0x510
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Naohiro Aota <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: "Darrick J . Wong" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Print to the trace log before releasing the lock to avoid racing with
other trace log printers of the same lock type.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Liam R. Howlett <[email protected]>
Suggested-by: Steven Rostedt (VMware) <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If it's not prepared to free unref page, the pcp page migratetype is
unset. Thus we will get rubbish from get_pcppage_migratetype() and
might list_del(&page->lru) again after it's already deleted from the list
leading to grumble about data corruption.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: df1acc856923 ("mm/page_alloc: avoid conflating IRQs disabled with zone->lock")
Signed-off-by: Miaohe Lin <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to
proportional memory.low reclaim") introduced a divide by zero corner
case when oomd is being used in combination with cgroup memory.low
protection.
When oomd decides to kill a cgroup, it will force the cgroup memory to
be reclaimed after killing the tasks, by writing to the memory.max file
for that cgroup, forcing the remaining page cache and reclaimable slab
to be reclaimed down to zero.
Previously, on cgroups with some memory.low protection that would result
in the memory being reclaimed down to the memory.low limit, or likely
not at all, having the page cache reclaimed asynchronously later.
With f56ce412a59d the oomd write to memory.max tries to reclaim all the
way down to zero, which may race with another reclaimer, to the point of
ending up with the divide by zero below.
This patch implements the obvious fix.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim")
Signed-off-by: Rik van Riel <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Chris Down <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After fork, the child process will get incorrect (2x) hugetlb_usage. If
a process uses 5 2MB hugetlb pages in an anonymous mapping,
HugetlbPages: 10240 kB
and then forks, the child will show,
HugetlbPages: 20480 kB
The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child. Child will have 2x actual usage.
Fix this by adding hugetlb_count_init in mm_init.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status")
Signed-off-by: Liu Zixian <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Previously, we noticed the one rpma example was failed[1] since commit
36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()"), where it
will use ODP feature to do RDMA WRITE between fsdax files.
After digging into the code, we found hmm_vma_handle_pte() will still
return EFAULT even though all the its requesting flags has been
fulfilled. That's because a DAX page will be marked as (_PAGE_SPECIAL |
PAGE_DEVMAP) by pte_mkdevmap().
Link: https://github.com/pmem/rpma/issues/1142 [1]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 405506274922 ("mm/hmm: add missing call to hmm_pte_need_fault in HMM_PFN_SPECIAL handling")
Signed-off-by: Li Zhijian <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The SQPOLL thread dictates the lock order, and we hold the ctx->uring_lock
for all the registration opcodes. We also hold a ref to the ctx, and we
do drop the lock for other reasons to quiesce, so it's fine to drop the
ctx lock temporarily to grab the sqd->lock. This fixes the following
lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.5/25433 is trying to acquire lock:
ffff888023426870 (&sqd->lock){+.+.}-{3:3}, at: io_register_iowq_max_workers fs/io_uring.c:10551 [inline]
ffff888023426870 (&sqd->lock){+.+.}-{3:3}, at: __io_uring_register fs/io_uring.c:10757 [inline]
ffff888023426870 (&sqd->lock){+.+.}-{3:3}, at: __do_sys_io_uring_register+0x10aa/0x2e70 fs/io_uring.c:10792
but task is already holding lock:
ffff8880885b40a8 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_register+0x2e1/0x2e70 fs/io_uring.c:10791
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&ctx->uring_lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:596 [inline]
__mutex_lock+0x131/0x12f0 kernel/locking/mutex.c:729
__io_sq_thread fs/io_uring.c:7291 [inline]
io_sq_thread+0x65a/0x1370 fs/io_uring.c:7368
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
-> #0 (&sqd->lock){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3051 [inline]
check_prevs_add kernel/locking/lockdep.c:3174 [inline]
validate_chain kernel/locking/lockdep.c:3789 [inline]
__lock_acquire+0x2a07/0x54a0 kernel/locking/lockdep.c:5015
lock_acquire kernel/locking/lockdep.c:5625 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
__mutex_lock_common kernel/locking/mutex.c:596 [inline]
__mutex_lock+0x131/0x12f0 kernel/locking/mutex.c:729
io_register_iowq_max_workers fs/io_uring.c:10551 [inline]
__io_uring_register fs/io_uring.c:10757 [inline]
__do_sys_io_uring_register+0x10aa/0x2e70 fs/io_uring.c:10792
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ctx->uring_lock);
lock(&sqd->lock);
lock(&ctx->uring_lock);
lock(&sqd->lock);
*** DEADLOCK ***
Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers")
Reported-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- make the cros_ec_typec driver to use the pre-existing
cros_ec_check_features() function
sensorhub:
- add trace events for sample
misc:
- cros_ec_proto - re-send commands in the event of a timeout (for the
FPMCU)
- fix warnings in cros_ec_trace related to format output"
* tag 'tag-chrome-platform-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_trace: Fix format warnings
platform/chrome: cros_ec_typec: Use existing feature check
platform/chrome: cros_ec_proto: Send command again when timeout occurs
platform/chrome: sensorhub: Add trace events for sample
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add ACPI support to the PCI VMD driver, improve suspend-to-idle
support for AMD platforms and update documentation.
Specifics:
- Add ACPI support to the PCI VMD driver (Rafael Wysocki)
- Rearrange suspend-to-idle support code to reflect the platform
firmware expectations on some AMD platforms (Mario Limonciello)
- Make SSDT overlays documentation follow the code documented by it
more closely (Andy Shevchenko)"
* tag 'acpi-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Run both AMD and Microsoft methods if both are supported
Documentation: ACPI: Align the SSDT overlays file with the code
PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus
|
|
Pull more documentation updates from Jonathan Corbet:
"Another collection of documentation patches, mostly fixes but also
includes another set of traditional Chinese translations"
* tag 'docs-5.15-2' of git://git.lwn.net/linux:
docs: pdfdocs: Fix typo in CJK-language specific font settings
docs: kernel-hacking: Remove inappropriate text
docs/zh_TW: add translations for zh_TW/filesystems
docs/zh_TW: add translations for zh_TW/cpu-freq
docs/zh_TW: add translations for zh_TW/arm64
docs/zh_CN: Modify the translator tag and fix the wrong word
Documentation/features/vm: correct huge-vmap APIs
Documentation: block: blk-mq: Fix small typo in multi-queue docs
Documentation: in_irq() cleanup
Documentation: arm: marvell: Add 88F6825 model into list
Documentation/process/maintainer-pgp-guide: Replace broken link to PGP path finder
Documentation: locking: fix references
Documentation: Update details of The Linux Kernel Module Programming Guide
docs: x86: Remove obsolete information about x86_64 vmalloc() faulting
Documentation/process/applying-patches: Activate linux-next man hyperlink
|
|
Clang 14 will add support for __attribute__((__error__(""))) and
__attribute__((__warning__(""))). To make use of these in
__compiletime_error and __compiletime_warning (as used by BUILD_BUG and
friends) for newer clang and detect/fallback for older versions of
clang, move these to compiler_attributes.h and guard them with
__has_attribute preprocessor guards.
Link: https://reviews.llvm.org/D106030
Link: https://bugs.llvm.org/show_bug.cgi?id=16428
Link: https://github.com/ClangBuiltLinux/linux/issues/1173
Signed-off-by: Nick Desaulniers <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
[Reworded, landed in Clang 14]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"The only main change I have for this round of updates is the modules
MAINTAINERS update.
As I find myself with less time to devote to upstream these days, Luis
has kindly agreed to help maintain the module loader, to eventually
transition to being the primary maintainer. Since Luis is already very
involved upstream with experience maintaining various areas of the
kernel including the kmod usermode helper, I think he is a great fit
for this area of the kernel.
Summary:
- Add Luis Chamberlain as modules maintainer
- Fix for .ctors sections in module linker script"
* tag 'modules-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
MAINTAINERS: Add Luis Chamberlain as modules maintainer
module: combine constructors in module linker script
|
|
Pull microblaze update from Michal Simek:
- Kbuild clean up
* tag 'microblaze-v5.15' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: move core-y in arch/microblaze/Makefile to arch/microblaze/Kbuild
|
|
Include Christoph's rework of the dax_supported() helpers in the v5.15
libnvdimm update. This supports the ongoing dax-reflink enabling effort.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Restore performance on memory-starved servers
* tag 'nfsd-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: improve error response to over-size gss credential
SUNRPC: don't pause on incomplete allocation
|
|
Pull ceph updates from Ilya Dryomov:
- a set of patches to address fsync stalls caused by depending on
periodic rather than triggered MDS journal flushes in some cases
(Xiubo Li)
- a fix for mtime effectively not getting updated in case of competing
writers (Jeff Layton)
- a couple of fixes for inode reference leaks and various WARNs after
"umount -f" (Xiubo Li)
- a new ceph.auth_mds extended attribute (Jeff Layton)
- a smattering of fixups and cleanups from Jeff, Xiubo and Colin.
* tag 'ceph-for-5.15-rc1' of git://github.com/ceph/ceph-client:
ceph: fix dereference of null pointer cf
ceph: drop the mdsc_get_session/put_session dout messages
ceph: lockdep annotations for try_nonblocking_invalidate
ceph: don't WARN if we're forcibly removing the session caps
ceph: don't WARN if we're force umounting
ceph: remove the capsnaps when removing caps
ceph: request Fw caps before updating the mtime in ceph_write_iter
ceph: reconnect to the export targets on new mdsmaps
ceph: print more information when we can't find snaprealm
ceph: add ceph_change_snap_realm() helper
ceph: remove redundant initializations from mdsc and session
ceph: cancel delayed work instead of flushing on mdsc teardown
ceph: add a new vxattr to return auth mds for an inode
ceph: remove some defunct forward declarations
ceph: flush the mdlog before waiting on unsafe reqs
ceph: flush mdlog before umounting
ceph: make iterate_sessions a global symbol
ceph: make ceph_create_session_msg a global symbol
ceph: fix comment about short copies in ceph_write_end
ceph: fix memory leak on decode error in ceph_handle_caps
|
|
Pull 9p updates from Dominique Martinet:
"A couple of harmless fixes, increase max tcp msize (64KB -> 1MB), and
increase default msize (8KB -> 128KB)
The default increase has been discussed with Christian for the qemu
side of things but makes sense for all supported transports"
* tag '9p-for-5.15-rc1' of git://github.com/martinetd/linux:
net/9p: increase default msize to 128k
net/9p: use macro to define default msize
net/9p: increase tcp max msize to 1MB
9p/xen: Fix end of loop tests for list_for_each_entry
9p/trans_virtio: Remove sysfs file on probe failure
|
|
All users of compat_alloc_user_space() and copy_in_user() have been
removed from the kernel, only a few functions in sparc remain that can be
changed to calling arch_copy_in_user() instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
These are all handled correctly when calling the native system call entry
point, so remove the special cases.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The compat implementations for mbind, get_mempolicy, set_mempolicy and
migrate_pages are just there to handle the subtly different layout of
bitmaps on 32-bit hosts.
The compat implementation however lacks some of the checks that are
present in the native one, in particular for checking that the extra bits
are all zero when user space has a larger mask size than the kernel.
Worse, those extra bits do not get cleared when copying in or out of the
kernel, which can lead to incorrect data as well.
Unify the implementation to handle the compat bitmap layout directly in
the get_nodes() and copy_nodes_to_user() helpers. Splitting out the
get_bitmap() helper from get_nodes() also helps readability of the native
case.
On x86, two additional problems are addressed by this: compat tasks can
pass a bitmap at the end of a mapping, causing a fault when reading across
the page boundary for a 64-bit word. x32 tasks might also run into
problems with get_mempolicy corrupting data when an odd number of 32-bit
words gets passed.
On parisc the migrate_pages() system call apparently had the wrong calling
convention, as big-endian architectures expect the words inside of a
bitmap to be swapped. This is not a problem though since parisc has no
NUMA support.
[[email protected]: fix mempolicy crash]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/YQPLG20V3dmOfq3a@osiris/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The compat move_pages() implementation uses compat_alloc_user_space() for
converting the pointer array. Moving the compat handling into the
function itself is a bit simpler and lets us avoid the
compat_alloc_user_space() call.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kimage_alloc_init() expects a __user pointer, so compat_sys_kexec_load()
uses compat_alloc_user_space() to convert the layout and put it back onto
the user space caller stack.
Moving the user space access into the syscall handler directly actually
makes the code simpler, as the conversion for compat mode can now be done
on kernel memory.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/YPbtsU4GX6PL7%[email protected]/
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Arnd Bergmann <[email protected]>
Co-developed-by: Eric Biederman <[email protected]>
Co-developed-by: Christoph Hellwig <[email protected]>
Acked-by: "Eric W. Biederman" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "compat: remove compat_alloc_user_space", v5.
Going through compat_alloc_user_space() to convert indirect system call
arguments tends to add complexity compared to handling the native and
compat logic in the same code.
This patch (of 6):
The locking is the same between the native and compat version of
sys_kexec_load(), so it can be done in the common implementation to reduce
duplication.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Co-developed-by: Eric Biederman <[email protected]>
Co-developed-by: Christoph Hellwig <[email protected]>
Acked-by: "Eric W. Biederman" <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Change to use bool type for 'page_was_mapped' variable making it more
readable.
Link: https://lkml.kernel.org/r/ce1279df18d2c163998c403e0b5ec6d3f6f90f7a.1629447552.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
since commit a98a2f0c8ce1 ("mm/rmap: split migration into its own
function"), the migration ptes establishment has been split into a
separate try_to_migrate() function, thus update the related comments.
Link: https://lkml.kernel.org/r/5b824bad6183259c916ae6cf42f81d14c6118b06.1629447552.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use thp_nr_pages() instead of compound_nr() to get the number of pages for
THP page, meanwhile introducing a local variable 'nr_pages' to avoid
getting the number of pages repeatedly.
Link: https://lkml.kernel.org/r/a8e331ac04392ee230c79186330fb05e86a2aa77.1629447552.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <[email protected]>
Reviewed-by: Yang Shi <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Disable preemption on -RT for the vmstat code. On vanila the code runs in
IRQ-off regions while on -RT it may not when stats are updated under a
local_lock. "preempt_disable" ensures that the same resources is not
updated in parallel due to preemption.
This patch differs from the preempt-rt version where __count_vm_event and
__count_vm_events are also protected. The counters are explicitly
"allowed to be to be racy" so there is no need to protect them from
preemption. Only the accurate page stats that are updated by a
read-modify-write need protection. This patch also differs in that a
preempt_[en|dis]able_rt helper is not used. As vmstat is the only user of
the helper, it was suggested that it be open-coded in vmstat.c instead of
risking the helper being used in unnecessary contexts.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Addresses-Coverity reported Control flow issues in sid_to_id()
/fs/ksmbd/smbacl.c: 277 in sid_to_id()
271
272 if (sidtype == SIDOWNER) {
273 kuid_t uid;
274 uid_t id;
275
276 id = le32_to_cpu(psid->sub_auth[psid->num_subauth - 1]);
>>> CID 1506810: Control flow issues (NO_EFFECT)
>>> This greater-than-or-equal-to-zero comparison of an unsigned value
>>> is always true. "id >= 0U".
277 if (id >= 0) {
278 /*
279 * Translate raw sid into kuid in the server's user
280 * namespace.
281 */
282 uid = make_kuid(&init_user_ns, id);
Addresses-Coverity: ("Control flow issues")
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Addresses-Coverity reported Uninitialized variables warninig :
/fs/ksmbd/smb2pdu.c: 5525 in set_file_basic_info()
5519 if (!rc) {
5520 inode->i_ctime = ctime;
5521 mark_inode_dirty(inode);
5522 }
5523 inode_unlock(inode);
5524 }
>>> CID 1506805: Uninitialized variables (UNINIT)
>>> Using uninitialized value "rc".
5525 return rc;
5526 }
5527
5528 static int set_file_allocation_info(struct ksmbd_work *work,
5529 struct ksmbd_file *fp, char *buf)
5530 {
Addresses-Coverity: ("Uninitialized variable")
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Currently there are two ndr_read_int64 calls where ret is being checked
for failure but ret is not being assigned a return value from the call.
Static analyis is reporting the checks on ret as dead code. Fix this.
Addresses-Coverity: ("Logical dead code")
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
In case of !SQPOLL, io_cqring_ev_posted_iopoll() doesn't provide a
memory barrier required by waitqueue_active(&ctx->poll_wait). There is
a wq_has_sleeper(), which does smb_mb() inside, but it's called only for
SQPOLL.
Fixes: 5fd4617840596 ("io_uring: be smarter about waking multiple CQ ring waiters")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/2982e53bcea2274006ed435ee2a77197107d8a29.1631130542.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <[email protected]>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
|
|
Since the commit e5efaeb8a8f5 ("bootconfig: Support mixing
a value and subkeys under a key") allows to co-exist a value
node and key nodes under a node, xbc_node_for_each_child()
is not only returning key node but also a value node.
In the boot-time tracing using xbc_node_for_each_child() to
iterate the events, groups and instances, but those must be
key nodes. Thus it must use xbc_node_for_each_subkey().
Link: https://lkml.kernel.org/r/163112988361.74896.2267026262061819145.stgit@devnote2
Fixes: e5efaeb8a8f5 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/linux
Pull SLUB updates from Vlastimil Babka:
"SLUB: reduce irq disabled scope and make it RT compatible
This series was initially inspired by Mel's pcplist local_lock
rewrite, and also interest to better understand SLUB's locking and the
new primitives and RT variants and implications. It makes SLUB
compatible with PREEMPT_RT and generally more preemption-friendly,
apparently without significant regressions, as the fast paths are not
affected.
The main changes to SLUB by this series:
- irq disabling is now only done for minimum amount of time needed to
protect the strict kmem_cache_cpu fields, and as part of spin lock,
local lock and bit lock operations to make them irq-safe
- SLUB is fully PREEMPT_RT compatible
The series should now be sufficiently tested in both RT and !RT
configs, mainly thanks to Mike.
The RFC/v1 version also got basic performance screening by Mel that
didn't show major regressions. Mike's testing with hackbench of v2 on
!RT reported negligible differences [6]:
virgin(ish) tip
5.13.0.g60ab3ed-tip
7,320.67 msec task-clock # 7.792 CPUs utilized ( +- 0.31% )
221,215 context-switches # 0.030 M/sec ( +- 3.97% )
16,234 cpu-migrations # 0.002 M/sec ( +- 4.07% )
13,233 page-faults # 0.002 M/sec ( +- 0.91% )
27,592,205,252 cycles # 3.769 GHz ( +- 0.32% )
8,309,495,040 instructions # 0.30 insn per cycle ( +- 0.37% )
1,555,210,607 branches # 212.441 M/sec ( +- 0.42% )
5,484,209 branch-misses # 0.35% of all branches ( +- 2.13% )
0.93949 +- 0.00423 seconds time elapsed ( +- 0.45% )
0.94608 +- 0.00384 seconds time elapsed ( +- 0.41% ) (repeat)
0.94422 +- 0.00410 seconds time elapsed ( +- 0.43% )
5.13.0.g60ab3ed-tip +slub-local-lock-v2r3
7,343.57 msec task-clock # 7.776 CPUs utilized ( +- 0.44% )
223,044 context-switches # 0.030 M/sec ( +- 3.02% )
16,057 cpu-migrations # 0.002 M/sec ( +- 4.03% )
13,164 page-faults # 0.002 M/sec ( +- 0.97% )
27,684,906,017 cycles # 3.770 GHz ( +- 0.45% )
8,323,273,871 instructions # 0.30 insn per cycle ( +- 0.28% )
1,556,106,680 branches # 211.901 M/sec ( +- 0.31% )
5,463,468 branch-misses # 0.35% of all branches ( +- 1.33% )
0.94440 +- 0.00352 seconds time elapsed ( +- 0.37% )
0.94830 +- 0.00228 seconds time elapsed ( +- 0.24% ) (repeat)
0.93813 +- 0.00440 seconds time elapsed ( +- 0.47% ) (repeat)
RT configs showed some throughput regressions, but that's expected
tradeoff for the preemption improvements through the RT mutex. It
didn't prevent the v2 to be incorporated to the 5.13 RT tree [7],
leading to testing exposure and bugfixes.
Before the series, SLUB is lockless in both allocation and free fast
paths, but elsewhere, it's disabling irqs for considerable periods of
time - especially in allocation slowpath and the bulk allocation,
where IRQs are re-enabled only when a new page from the page allocator
is needed, and the context allows blocking. The irq disabled sections
can then include deactivate_slab() which walks a full freelist and
frees the slab back to page allocator or unfreeze_partials() going
through a list of percpu partial slabs. The RT tree currently has some
patches mitigating these, but we can do much better in mainline too.
Patches 1-6 are straightforward improvements or cleanups that could
exist outside of this series too, but are prerequsities.
Patches 7-9 are also preparatory code changes without functional
changes, but not so useful without the rest of the series.
Patch 10 simplifies the fast paths on systems with preemption, based
on (hopefully correct) observation that the current loops to verify
tid are unnecessary.
Patches 11-20 focus on reducing irq disabled scope in the allocation
slowpath:
- patch 11 moves disabling of irqs into ___slab_alloc() from its
callers, which are the allocation slowpath, and bulk allocation.
Instead these callers only disable preemption to stabilize the cpu.
- The following patches then gradually reduce the scope of disabled
irqs in ___slab_alloc() and the functions called from there. As of
patch 14, the re-enabling of irqs based on gfp flags before calling
the page allocator is removed from allocate_slab(). As of patch 17,
it's possible to reach the page allocator (in case of existing
slabs depleted) without disabling and re-enabling irqs a single
time.
Pathces 21-26 reduce the scope of disabled irqs in functions related
to unfreezing percpu partial slab.
Patch 27 is preparatory. Patch 28 is adopted from the RT tree and
converts the flushing of percpu slabs on all cpus from using IPI to
workqueue, so that the processing isn't happening with irqs disabled
in the IPI handler. The flushing is not performance critical so it
should be acceptable.
Patch 29 also comes from RT tree and makes object_map_lock RT
compatible.
Patch 30 make slab_lock irq-safe on RT where we cannot rely on having
irq disabled from the list_lock spin lock usage.
Patch 31 changes kmem_cache_cpu->partial handling in put_cpu_partial()
from cmpxchg loop to a short irq disabled section, which is used by
all other code modifying the field. This addresses a theoretical race
scenario pointed out by Jann, and makes the critical section safe wrt
with RT local_lock semantics after the conversion in patch 35.
Patch 32 changes preempt disable to migrate disable, so that the
nested list_lock spinlock is safe to take on RT. Because
migrate_disable() is a function call even on !RT, a small set of
private wrappers is introduced to keep using the cheaper
preempt_disable() on !PREEMPT_RT configurations. As of this patch,
SLUB should be already compatible with RT's lock semantics.
Finally, patch 33 changes irq disabled sections that protect
kmem_cache_cpu fields in the slow paths, with a local lock. However on
PREEMPT_RT it means the lockless fast paths can now preempt slow paths
which don't expect that, so the local lock has to be taken also in the
fast paths and they are no longer lockless. RT folks seem to not mind
this tradeoff. The patch also updates the locking documentation in the
file's comment"
Mike Galbraith and Mel Gorman verified that their earlier testing
observations still hold for the final series:
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/lkml/[email protected]/
* tag 'mm-slub-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/linux: (33 commits)
mm, slub: convert kmem_cpu_slab protection to local_lock
mm, slub: use migrate_disable() on PREEMPT_RT
mm, slub: protect put_cpu_partial() with disabled irqs instead of cmpxchg
mm, slub: make slab_lock() disable irqs with PREEMPT_RT
mm: slub: make object_map_lock a raw_spinlock_t
mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context
mm, slab: split out the cpu offline variant of flush_slab()
mm, slub: don't disable irqs in slub_cpu_dead()
mm, slub: only disable irq with spin_lock in __unfreeze_partials()
mm, slub: separate detaching of partial list in unfreeze_partials() from unfreezing
mm, slub: detach whole partial list at once in unfreeze_partials()
mm, slub: discard slabs in unfreeze_partials() without irqs disabled
mm, slub: move irq control into unfreeze_partials()
mm, slub: call deactivate_slab() without disabling irqs
mm, slub: make locking in deactivate_slab() irq-safe
mm, slub: move reset of c->page and freelist out of deactivate_slab()
mm, slub: stop disabling irqs around get_partial()
mm, slub: check new pages with restored irqs
mm, slub: validate slab from partial list or page allocator before making it cpu slab
mm, slub: restore irqs around calling new_slab()
...
|
|
The original test for adding and removing eprobes used synthetic events
and retrieved the filename from the open system call at the end of the
system call. This would allow it to always be loaded into the page tables
when accessed.
Masami suggested that the test was too complex for just testing add and
remove, so it was changed to test just adding and removing an event probe
on top of the start of the open system call event. Now it is possible that
the filename will not be loaded into memory at the time the eprobe is
triggered, and will result in "(fault)" being displayed in the event. This
causes the test to fail.
Account for "(fault)" also being one of the values of the filename field
of the event probe.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 079db70794ec5 ("selftests/ftrace: Add test case to test adding and removing of event probe")
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Setting the hist_elt_data.field_var_str[] array unconditionally to a
size of SYNTH_FIELD_MAX elements wastes space unnecessarily. The
actual number of elements needed can be calculated at run-time
instead.
In most cases, this will save a lot of space since it's a per-elt
array which isn't normally close to being full. It also allows us to
increase SYNTH_FIELD_MAX without worrying about even more wastage when
we do that.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Tom Zanussi <[email protected]>
Tested-by: Artem Bityutskiy <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Sometimes it is useful to construct larger synthetic trace events. Increase
'SYNTH_FIELDS_MAX' (maximum number of fields in a synthetic event) from 32 to
64.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Artem Bityutskiy <[email protected]>
Acked-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|