aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-29logfs: fix a leak in get_sbAl Viro4-7/+8
a) switch ->put_device() to logfs_super * b) actually call it on early failures in logfs_get_sb_device() Signed-off-by: Al Viro <[email protected]>
2010-10-29logfs get_sb, part 3Al Viro4-39/+29
take logfs_get_sb_device() calls to logfs_get_sb() itself Signed-off-by: Al Viro <[email protected]>
2010-10-29logfs get_sb, part 2Al Viro4-14/+13
take setting s_bdev/s_mtd/s_devops to callers of logfs_get_sb_device(), don't bother passing them separately Signed-off-by: Al Viro <[email protected]>
2010-10-29logfs get_sb massage, part 1Al Viro4-21/+39
move allocation of logfs_super to logfs_get_sb, pass it to logfs_get_sb_...(). Signed-off-by: Al Viro <[email protected]>
2010-10-29convert v9fsAl Viro1-12/+10
Signed-off-by: Al Viro <[email protected]>
2010-10-29convert ubifsAl Viro1-7/+6
Signed-off-by: Al Viro <[email protected]>
2010-10-29convert get_sb_pseudo() usersAl Viro8-43/+32
Signed-off-by: Al Viro <[email protected]>
2010-10-29convert get_sb_nodev() usersAl Viro17-73/+87
Signed-off-by: Al Viro <[email protected]>
2010-10-29convert get_sb_single() usersAl Viro25-139/+147
Signed-off-by: Al Viro <[email protected]>
2010-10-29convert get_sb_mtd() users to ->mount()Al Viro4-49/+36
Signed-off-by: Al Viro <[email protected]>
2010-10-29new helper: mount_bdev()Al Viro31-161/+150
... and switch of the obvious get_sb_bdev() users to ->mount() Signed-off-by: Al Viro <[email protected]>
2010-10-29beginning of transtion: ->mount()Al Viro2-3/+16
eventual replacement for ->get_sb() - does *not* get vfsmount, return ERR_PTR(error) or root of subtree to be mounted. Signed-off-by: Al Viro <[email protected]>
2010-10-29fix open/umount raceAl Viro2-3/+5
nameidata_to_filp() drops nd->path or transfers it to opened file. In the former case it's a Bad Idea(tm) to do mnt_drop_write() on nd->path.mnt, since we might race with umount and vfsmount in question might be gone already. Fix: don't drop it, then... IOW, have nameidata_to_filp() grab nd->path in case it transfers it to file and do path_drop() in callers. After they are through with accessing nd->path... Reported-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-10-29a couple of open-coded ihold() introduced by nfs mergeAl Viro1-2/+2
Signed-off-by: Al Viro <[email protected]>
2010-10-29x86-32: Restore irq stacks NUMA-aware allocationsEric Dumazet1-2/+7
Commit 22d4cd4c4d ("Allocate irq stacks seperate from percpu area") removed NUMA affinity of IRQ stacks as side-effect of the fix. Using alloc_pages_node() instead of __get_free_pages() is safe, even if the target node has no available LOWMEM pages : alloc_pages_node() fallbacks to another node. Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Brian Gerst <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Peter Zijlstra <[email protected]> LKML-Reference: <1288276854.2649.607.camel@edumazet-laptop> Signed-off-by: Ingo Molnar <[email protected]>
2010-10-29md: tidy up device searches in read_balance.NeilBrown1-56/+36
The code for searching through the device list to read-balance in raid1 is rather clumsy and hard to follow. Try to simplify it a bit. No important functionality change here. Signed-off-by: NeilBrown <[email protected]>
2010-10-29md/raid1: fix some typos in comments.NeilBrown1-3/+3
Signed-off-by: NeilBrown <[email protected]>
2010-10-29md/raid1: discard unused variable.NeilBrown2-3/+0
This structure field (flushing_bio_list) is never used, so remove it. Signed-off-by: NeilBrown <[email protected]>
2010-10-29md: unplug writes to external bitmaps.NeilBrown1-1/+1
When writing to an 'external' bitmap we don't currently unplug the device before waiting, so we can get a 3msec delay each time; So use REQ_UNPLUG to force and unplug. Signed-off-by: NeilBrown <[email protected]>
2010-10-28x86, uv: More Westmere support on SGI UVRuss Anderson1-4/+3
Enable Westmere support for all APIC modes on SGI UV. Signed-off-by: Russ Anderson <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2010-10-28Input: bu21013_ts - fix null dereference in error handlingDan Carpenter1-1/+1
bu21013_data could be NULL so better not reference it. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2010-10-28Input: ad7879 - prevent invalid finger data reportsMichael Hennerich1-5/+27
Considering following scenario - the touch is present on the screen at the beginning of the last conversion sequence, but by the time the last sequence is finished, the finger is lift off. The AD7879 data available interrupt signals (DAV) completion, however some X,Y values are not valid because the screen inputs were floating during the acquisition. The AD7877 acts differently here, since it only asserts DAV if the touch is still present when the conversion sequence finished. Based on the fact that this can only happen in the last sample of the repeated conversion sequence, we simply skip the last (short glitches are filtered by the AD7879 internal median and average filters). This doesn't cause noticeable side effects, since the minimum conversion interval is 9.44ms. We receive ~100 waypoint samples per second, so we simply delay the result by 9.44ms. We also reject samples where pressure is greater than pressure_max. Signed-off-by: Michael Hennerich <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2010-10-29kconfig: Have streamline_config process menuconfigs tooSteven Rostedt1-2/+2
Some menuconfigs in the Kconfig files have prompts and dependencies. Currently, streamline_config misses these, and this can cause streamline_config to keep modules enabled that should not be, and even worse, not enable those that should. This patch makes streamline_config process menuconfigs just like it would process a config. Reported-by: member graysky <[email protected]> Signed-off-by: Steven Rostedt <[email protected]>
2010-10-29kconfig: Fix streamline_config to read multi line deps in Kconfig filesSteven Rostedt1-1/+18
I noticed that some Kconfig files have multi line dependencies that continue with a backslash. Those dependencies on the next line will be missed by streamline_config. For example: config CS89x0 tristate "CS89x0 support" depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ || ARCH_IXDP2X01 || MACH_MX31ADS) The "|| ARCH_IXDP2X01 || MACH_MX31ADS)" will not be processed. This patch adds code to handle this case. Signed-off-by: Steven Rostedt <[email protected]>
2010-10-29kconfig: Fix missing declaration of variable $dir in streamline_config.plhiromu1-1/+3
On Fri, Aug 17, 2010 at 01:43PM +0800, Américo Wang wrote: > Acked-by: WANG Cong <[email protected]> > > BTW, I think we should add "use strict;" too. Then I added "use strict;" to streamline_config.pl, I saw another warning. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 286. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 287. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 288. Then I added "my $dir;" to line 285. Cc: Américo Wang <[email protected]> Cc: Toralf Foerster <[email protected]> Cc: KAMEZAWA Hiroyuki <[email protected]> Cc: YOSHIFUJI Hideaki <[email protected]> Signed-off-by: Hiromu Yakura <[email protected]> LKML-Reference: <1282042158.7160.9.camel@hiromu-Macbook> [ changed to just add my in front of $dir instead of new line ] Signed-off-by: Steven Rostedt <[email protected]>
2010-10-29kconfig: Fix variable name typo %prompts in streamline_config.plhiromu yagura1-2/+2
When I added "use strict;" to streamline_config.pl, I saw the following warnings: > Global symbol "%prompt" requires explicit package name at scripts/kconfig/streamline_config.pl line 183. > Global symbol "%prompt" requires explicit package name at scripts/kconfig/streamline_config.pl line 368. The declaration of %prompt was incorrect, and should have been %prompts. Cc: Toralf Foerster <[email protected]> Cc: KAMEZAWA Hiroyuki <[email protected]> Cc: YOSHIFUJI Hideaki <[email protected]> Signed-off-by: Hiromu Yakura <[email protected]> LKML-Reference: <1281845597.11566.5.camel@camp10-laptop> Signed-off-by: Steven Rostedt <[email protected]>
2010-10-29kconfig: Make localmodconfig handle environment variablesSteven Rostedt1-1/+11
The commit 838a2e55e6a4e9e8a10451ed2ef0f7a08dabdb04 kbuild: migrate all arch to the kconfig mainmenu upgrade Broke make localmodconfig. The reason was that it added a environment variable to the kconfig source, which the streamline_config.pl could not handle. This patch changes streamline_config.pl to handle kconfig sources using environment variables in their names. Cc: Arnaud Lacombe <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Michal Marek <[email protected]> Signed-off-by: Steven Rostedt <[email protected]>
2010-10-29cifs: Cleanup and thus reduce smb session structure and fields used during ↵Shirish Pargaonkar4-47/+55
authentication Removed following fields from smb session structure cryptkey, ntlmv2_hash, tilen, tiblob and ntlmssp_auth structure is allocated dynamically only if the auth mech in NTLMSSP. response field within a session_key structure is used to initially store the target info (either plucked from type 2 challenge packet in case of NTLMSSP or fabricated in case of NTLMv2 without extended security) and then to store Message Authentication Key (mak) (session key + client response). Server challenge or cryptkey needed during a NTLMSSP authentication is now part of ntlmssp_auth structure which gets allocated and freed once authenticaiton process is done. Signed-off-by: Shirish Pargaonkar <[email protected]> Signed-off-by: Steve French <[email protected]>
2010-10-29NTLM auth and sign - Use appropriate server challengeShirish Pargaonkar5-12/+21
Need to have cryptkey or server challenge in smb connection (struct TCP_Server_Info) for ntlm and ntlmv2 auth types for which cryptkey (Encryption Key) is supplied just once in Negotiate Protocol response during an smb connection setup for all the smb sessions over that smb connection. For ntlmssp, cryptkey or server challenge is provided for every smb session in type 2 packet of ntlmssp negotiation, the cryptkey provided during Negotiation Protocol response before smb connection does not count. Rename cryptKey to cryptkey and related changes. Signed-off-by: Shirish Pargaonkar <[email protected]> Signed-off-by: Steve French <[email protected]>
2010-10-28Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds44-95/+2845
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28Merge branch 'packaging' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: scripts/package: don't break if %{_smp_mflags} isn't set kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
2010-10-28Merge branch 'misc' of ↵Linus Torvalds29-476/+1597
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (39 commits) Revert "namespace: add source file location exceptions" Coccinelle: Add contextual message Coccinelle: Fix documentation Coccinelle: Find doubled arguments to boolean or bit operators. Coccinelle: Find nested lock+irqsave functions that use the same flags variables. namespace: add source file location exceptions scripts/extract-ikconfig: add support for bzip2, lzma and lzo kbuild: check return value of asprintf() scripts/namespace.pl: improve to get more correct results scripts/namespace.pl: some bug fixes scripts/namespace.pl: update file exclusion list scripts/namespace.pl: fix wrong source path Coccinelle: Use the -no_show_diff option for org and report mode Coccinelle: Add a new mode named 'chain' Coccinelle: Use new comment format to explain kfree.cocci Coccinelle: Improve user information with a new kind of comment Coccinelle: Update documentation MAINTAINERS: Coccinelle: Update email address Documentation/kbuild: modules.txt cleanup Documentation/kbuild: major edit of modules.txt sections 5-8 ...
2010-10-28Merge branch 'kconfig' of ↵Linus Torvalds50-955/+946
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits) kbuild: convert `arch/tile' to the kconfig mainmenu upgrade README: cite nconfig Revert "kconfig: Temporarily disable dependency warnings" kconfig: Use PATH_MAX instead of 128 for path buffer sizes. kconfig: Fix realloc usage() kconfig: Propagate const kconfig: Don't go out from read config loop when you read new symbol kconfig: fix menuconfig on debian lenny kbuild: migrate all arch to the kconfig mainmenu upgrade kconfig: expand file names kconfig: use the file's name of sourced file kconfig: constify file name kconfig: don't emit warning upon rootmenu's prompt redefinition kconfig: replace KERNELVERSION usage by the mainmenu's prompt kconfig: delay gconf window initialization kconfig: expand by default the rootmenu's prompt kconfig: add a symbol string expansion helper kconfig: regen parser kconfig: implement the `mainmenu' directive kconfig: allow PACKAGE to be defined on the compiler's command-line ... Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28Merge branch 'for-next' of ↵Linus Torvalds77-2033/+5648
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (73 commits) power: Revert "power_supply: Mark twl4030_charger as broken" mfd: Fix a memory leak when unload mc13xxx-core module mfd: Fix resource reclaim for max8998 mfd: Remove unneeded ret value checking for max8998 register updates mfd: Add free max8998->ono irq in max8998_irq_exit() mfd: Fix resource reclaim in pcf50633_remove() omap4: pandaboard: fix up mmc card detect logic mfd: Fix ezx_pcap_probe error path mfd: Fix off-by-one value range checking for tps6507x mfd: Remove __devinitdata from tc6393xb_mmc_resources mfd: Add WM831x SPI support mfd: Factor out WM831x I2C I/O from the core driver mfd: Remove DEBUG defines from mc13xxx-core mfd: Fix jz4740_adc_set_enabled mfd: Add TPS658621C device ID mfd: Fix twl-irq function declaration warnings regulator: max8998 BUCK1/2 voltage change with use of GPIOs mfd: Voltages and GPIOs platform_data definitions for max8998 regulator: max8998 BUCK1/2 internal voltages and indexes defined mfd: Support for ICs compliant with max8998 ...
2010-10-28x86, memblock: Fix early_node_mem with big reserved region.Yinghai Lu1-5/+2
Xen can reserve huge amounts of memory for pre-ballooning, but that still shows as RAM in the e820 memory map. early_node_mem could not find range because of start/end adjusting, and will go through the fallback path. However, the fallback patch is still using memblock_x86_find_range_node(), and it is partially top-down because it go through active_range entries from low to high. Let's use memblock_find_in_range instead memblock_x86_find_range_node. So get real top down in fallback path. We may still need to make memblock_x86_find_range_node to do overall top_down work. Reported-by: Jeremy Fitzhardinge <[email protected]> Tested-by: Jeremy Fitzhardinge <[email protected]> Tested-by: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Yinghai Lu <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2010-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds8-56/+479
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code watchdog: add support for Broadcom BCM63xx built-in watchdog watchdog: f71808e_wdt: add support for the F71889FG watchdog: MachZ: fix debug macro watchdog: it8712f_wdt: Add module parameter for alternative reset sources watchdog: it8712f_wdt: Add comments for config/control register names watchdog: it87_wdt: Add support for watchdogs with 8b timers watchdog: it87_wdt: Add support for IT8720F watchdog watchdog: Use static const char * const where possible watchdog: iTCO_wdt: Cleanup warning messages watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDs
2010-10-28Merge branch 'for_linus' of ↵Linus Torvalds1-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: BUG_ON fix: check if page has buffers before calling page_buffers()
2010-10-28watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init codePrarit Bhargava1-2/+0
The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove to fail because of an incorrect usage count. The probe for this driver does a for_each_pci_dev() which gets a reference for a pci_dev when iTCO_wdt_init() is successful. The for_each_pci_dev() loop puts a reference for a pci_dev when iTCO_wdt_init() fails, so the iTCO_wdt_init() does not need to do any pci_dev_put()'s. The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function. Signed-off-by: Prarit Bhargava <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2010-10-29power: Revert "power_supply: Mark twl4030_charger as broken"Samuel Ortiz1-1/+0
The missing definitions are now in. This reverts commit 23886839a752401aba66517bff8a8b91549279ce. Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Fix a memory leak when unload mc13xxx-core moduleAxel Lin1-0/+2
Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Fix resource reclaim for max8998Axel Lin1-0/+4
Properly free irq and unregister max8998->rtc device in max8998_i2c_probe() error path and max8998_i2c_remove(). Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Remove unneeded ret value checking for max8998 register updatesAxel Lin1-2/+0
i2c_smbus_write_byte_data() returns zero or negative value, therefore no need to check if ret is greater than zero or not. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Add free max8998->ono irq in max8998_irq_exit()Axel Lin1-0/+3
Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Fix resource reclaim in pcf50633_remove()Axel Lin1-0/+2
Calling sysfs_remove_group() to remove sysfs entries and unregister bl_pdev in pcf50633_remove(). Signed-off-by: Axel Lin <[email protected]> Acked-by: Harald Welte <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29omap4: pandaboard: fix up mmc card detect logicMenon, Nishanth1-3/+12
For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. This functionality was introduced in mfd tree on track to kernel.org Sync pandaboard to the same and make mmc work. Cc: Tony Lindgren <[email protected]> Cc: Madhusudhan Chikkature <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Samuel Ortiz <[email protected]> Acked-by: Kishore Kadiyala <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Tested-by: Jarkko Nikula <[email protected]> Acked-by: Madhusudhan Chikkature <[email protected]> Acked-by: Tony Lindgren <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Fix ezx_pcap_probe error pathAxel Lin1-0/+1
return -ENOMEM if create_singlethread_workqueue failed. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Fix off-by-one value range checking for tps6507xAxel Lin1-1/+1
If bytes == (TPS6507X_MAX_REGISTER + 1), we have a buffer overflow when doing memcpy(&msg[1], src, bytes). Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Remove __devinitdata from tc6393xb_mmc_resourcesMarek Vasut1-1/+1
This static struct resource tc6393xb_mmc_resources[] is used in resume function, therefore the data can not be wiped after init. Also, this causes a section mismatch. Signed-off-by: Marek Vasut <[email protected]> Acked-by: Ian Molton <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Add WM831x SPI supportMark Brown3-0/+244
Implement support for controlling WM831x and WM832x devices using SPI. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-10-29mfd: Factor out WM831x I2C I/O from the core driverMark Brown6-139/+171
In preparation for the addition of SPI support for the WM831x move the I2C specific code into a separate file with a separate Kconfig option so the I2C support can be excluded from the build. Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new symbol. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.