| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the case where PTP is running on the hardware clock, but the kernel
system time is not being synced, a device reset can mess up the clock
time.
This occurs because we reset the clock time based on the kernel time
every reset. This causes us to potentially completely reset the PTP
time, and can cause unexpected behavior in programs like ptp4l.
Avoid this by saving the PTP time prior to device reset, and then
restoring using that time after the reset.
Directly restoring the PTP time we saved isn't perfect, because time
should have continued running, but the clock will essentially be stopped
during the reset. This is still better than the current solution of
assuming that the PTP HW clock is synced to the CLOCK_REALTIME.
We can do even better, by saving the ktime and calculating
a differential, using ktime_get(). This is based on CLOCK_MONOTONIC, and
allows us to get a fairly precise measure of the time difference between
saving and restoring the time.
Using this, we can update the saved PTP time, and use that as the value
to write to the hardware clock registers. This, of course is not perfect.
However, it does help ensure that the PTP time is restored as close as
feasible to the time it should have been if the reset had not occurred.
During device initialization, continue using the system time as the
source for the creation of the PTP clock, since this is the best known
current time source at driver load.
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
|
|
Modifying the VLAN stripping options when a port VLAN is configured
will break traffic for the VSI, and conceptually doesn't make sense,
so don't allow this.
Signed-off-by: Nicholas Nunley <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
|
|
This patch introduces DDP (Dynamic Device Personalization) which allows
loading profiles that change the way internal parser interprets processed
frames. To load DDP profiles it utilizes ethtool flash feature. The files
with recipes must be located in /var/lib/firmware directory. Afterwards
the recipe can be loaded by invoking:
ethtool -f <if_name> <file_name> 100
ethtool -f <if_name> - 100
See further details of this feature in the i40e documentation, or
visit
https://www.intel.com/content/www/us/en/architecture-and-technology/ethernet/dynamic-device-personalization-brief.html
The driver shall verify DDP profile can be loaded in accordance with
the rules:
* Package with Group ID 0 are exclusive and can only be loaded the first.
* Packages with Group ID 0x01-0xFE can only be loaded simultaneously
with the packages from the same group.
* Packages with Group ID 0xFF are compatible with all other packages.
Signed-off-by: Aleksandr Loktionov <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
|
|
Added a new local variable in the i40e_setup_tc function named
old_queue_pairs so num_queue_pairs can be restored to the correct
value in case configuring queue channels fails. Additionally, moved
the exit label in the i40e_setup_tc function so the if (need_reset)
block can be executed.
Also, fixed data packing in the i40e_setup_tc function.
Signed-off-by: Adam Ludkiewicz <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
|
|
Currently it's not possible to use perf on ath79 due to genirq flags
mismatch happening on static virtual IRQ 13 which is used for
performance counters hardware IRQ 5.
On TP-Link Archer C7v5:
CPU0
2: 0 MIPS 2 ath9k
4: 318 MIPS 4 19000000.eth
7: 55034 MIPS 7 timer
8: 1236 MISC 3 ttyS0
12: 0 INTC 1 ehci_hcd:usb1
13: 0 gpio-ath79 2 keys
14: 0 gpio-ath79 5 keys
15: 31 AR724X PCI 1 ath10k_pci
$ perf top
genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys)
On TP-Link Archer C7v4:
CPU0
4: 0 MIPS 4 19000000.eth
5: 7135 MIPS 5 1a000000.eth
7: 98379 MIPS 7 timer
8: 30 MISC 3 ttyS0
12: 90028 INTC 0 ath9k
13: 5520 INTC 1 ehci_hcd:usb1
14: 4623 INTC 2 ehci_hcd:usb2
15: 32844 AR724X PCI 1 ath10k_pci
16: 0 gpio-ath79 16 keys
23: 0 gpio-ath79 23 keys
$ perf top
genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1)
This problem is happening, because currently statically assigned virtual
IRQ 13 for performance counters is not claimed during the initialization
of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that
this interrupt isn't available for further use.
So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU.
Tested-by: Kevin 'ldir' Darbyshire-Bryant <[email protected]>
Signed-off-by: Petr Štetiar <[email protected]>
Acked-by: John Crispin <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Jason Cooper <[email protected]>
|
|
The intended behavior of function ipmi_hardcode_init_one() is to default
to kcs interface when no type argument is presented when initializing
ipmi with hard coded addresses.
However, the array of char pointers allocated on the stack by function
ipmi_hardcode_init() was not inited to zeroes, so it contained stack
debris.
Consequently, passing the cruft stored in this array to function
ipmi_hardcode_init_one() caused a crash when it was unable to detect
that the char * being passed was nonsense and tried to access the
address specified by the bogus pointer.
The fix is simply to initialize the si_type array to zeroes, so if
there were no type argument given to at the command line, function
ipmi_hardcode_init_one() could properly default to the kcs interface.
Signed-off-by: Tony Camuso <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
|
|
An extra memset was put into a place that cleared the interface
type.
Reported-by: Tony Camuso <[email protected]>
Fixes: 3cd83bac481dc4 ("ipmi: Consolidate the adding of platform devices")
Signed-off-by: Corey Minyard <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains an assortment of RISC-V-related fixups that we found
after rc4. They're all really unrelated:
- The addition of a 32-bit defconfig, to emphasize testing the 32-bit
port.
- A device tree bindings patch, which is pre-work for some patches
that target 5.2.
- A fix to support booting on systems with more physical memory than
the maximum supported by the kernel"
* tag 'riscv-for-linus-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Fix Maximum Physical Memory 2GiB option for 64bit systems
dt-bindings: clock: sifive: add FU540-C000 PRCI clock constants
RISC-V: Add separate defconfig for 32bit systems
|
|
Pull KVM fixes from Paolo Bonzini:
"5.1 keeps its reputation as a big bugfix release for KVM x86.
- Fix for a memory leak introduced during the merge window
- Fixes for nested VMX with ept=0
- Fixes for AMD (APIC virtualization, NMI injection)
- Fixes for Hyper-V under KVM and KVM under Hyper-V
- Fixes for 32-bit SMM and tests for SMM virtualization
- More array_index_nospec peppering"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing
KVM: fix spectrev1 gadgets
KVM: x86: fix warning Using plain integer as NULL pointer
selftests: kvm: add a selftest for SMM
selftests: kvm: fix for compilers that do not support -no-pie
selftests: kvm/evmcs_test: complete I/O before migrating guest state
KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels
KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU
KVM: x86: clear SMM flags before loading state while leaving SMM
KVM: x86: Open code kvm_set_hflags
KVM: x86: Load SMRAM in a single shot when leaving SMM
KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU
KVM: x86: Raise #GP when guest vCPU do not support PMU
x86/kvm: move kvm_load/put_guest_xcr0 into atomic context
KVM: x86: svm: make sure NMI is injected after nmi_singlestep
svm/avic: Fix invalidate logical APIC id entry
Revert "svm: Fix AVIC incomplete IPI emulation"
kvm: mmu: Fix overflow on kvm mmu page limit calculation
KVM: nVMX: always use early vmcs check when EPT is disabled
KVM: nVMX: allow tests to use bad virtual-APIC page address
...
|
|
Picking the changes from:
Fixes: b5bdbb6ccd11 ("ALSA: uapi: #include <time.h> in asound.h")
Which entails no changes in the tooling side.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Adrian Hunter <[email protected]>
Cc: Daniel Mentz <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Takashi Iwai <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Bastian reported broken 'perf top -p PID' command, it won't display any
data.
The problem is that for -p option we monitor single thread, so we don't
enable time in samples, because it's not needed.
However since commit 16c66bc167cc we use ordered queues to stash data
plus later commits added logic for dropping samples in case there's big
load and we don't keep up. All this needs timestamp for sample. Enabling
it unconditionally for perf top.
Reported-by: Bastian Beischer <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: bastian beischer <[email protected]>
Fixes: 16c66bc167cc ("perf top: Add processing thread")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
core:
Mao Han:
- Use hweight64() instead of hweight_long(attr.sample_regs_user) when parsing
samples, this is what the kernel uses and fixes de problem in 32-bit
architectures such as C-SKY that have more than 32 registers that can come
in a sample.
perf stat:
Jiri Olsa:
- Disable DIR_FORMAT feature for 'perf stat record', fixing an assert()
failure.
Intel PT:
Adrian Hunter:
- Fix use of parent_id in calls_view in export-to-sqlite.py.
BPF:
Gustavo A. R. Silva:
- Fix lock/unlock imbalances when processing BPF/BTF info, found by the
coverity tool.
libtraceevent:
Rikard Falkeborn:
- Fix missing equality check for strcmp(), detected by the cppcheck tool.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
There is a small race window in the card disconnection code that
allows the registration of another card with the very same card id.
This leads to a warning in procfs creation as caught by syzkaller.
The problem is that we delete snd_cards and snd_cards_lock entries at
the very beginning of the disconnection procedure. This makes the
slot available to be assigned for another card object while the
disconnection procedure is being processed. Then it becomes possible
to issue a procfs registration with the existing file name although we
check the conflict beforehand.
The fix is simply to move the snd_cards and snd_cards_lock clearances
at the end of the disconnection procedure. The references to these
entries are merely either from the global proc files like
/proc/asound/cards or from the card registration / disconnection, so
it should be fine to shift at the very end.
Reported-by: [email protected]
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
syzbot reported the following warning:
[ ] WARNING: CPU: 4 PID: 17089 at kernel/sched/deadline.c:255 task_non_contending+0xae0/0x1950
line 255 of deadline.c is:
WARN_ON(hrtimer_active(&dl_se->inactive_timer));
in task_non_contending().
Unfortunately, in some cases (for example, a deadline task
continuosly blocking and waking immediately) it can happen that
a task blocks (and task_non_contending() is called) while the
0-lag timer is still active.
In this case, the safest thing to do is to immediately decrease
the running bandwidth of the task, without trying to re-arm the 0-lag timer.
Signed-off-by: luca abeni <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Juri Lelli <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: chengjian (D) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
With extremely short cfs_period_us setting on a parent task group with a large
number of children the for loop in sched_cfs_period_timer() can run until the
watchdog fires. There is no guarantee that the call to hrtimer_forward_now()
will ever return 0. The large number of children can make
do_sched_cfs_period_timer() take longer than the period.
NMI watchdog: Watchdog detected hard LOCKUP on cpu 24
RIP: 0010:tg_nop+0x0/0x10
<IRQ>
walk_tg_tree_from+0x29/0xb0
unthrottle_cfs_rq+0xe0/0x1a0
distribute_cfs_runtime+0xd3/0xf0
sched_cfs_period_timer+0xcb/0x160
? sched_cfs_slack_timer+0xd0/0xd0
__hrtimer_run_queues+0xfb/0x270
hrtimer_interrupt+0x122/0x270
smp_apic_timer_interrupt+0x6a/0x140
apic_timer_interrupt+0xf/0x20
</IRQ>
To prevent this we add protection to the loop that detects when the loop has run
too many times and scales the period and quota up, proportionally, so that the timer
can complete before then next period expires. This preserves the relative runtime
quota while preventing the hard lockup.
A warning is issued reporting this state and the new values.
Signed-off-by: Phil Auld <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: <[email protected]>
Cc: Anton Blanchard <[email protected]>
Cc: Ben Segall <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
In the oplock break handler, writing pending changes from pages puts
the FileInfo handle. If the refcount reaches zero it closes the handle
and waits for any oplock break handler to return, thus causing a deadlock.
To prevent this situation:
* We add a wait flag to cifsFileInfo_put() to decide whether we should
wait for running/pending oplock break handlers
* We keep an additionnal reference of the SMB FileInfo handle so that
for the rest of the handler putting the handle won't close it.
- The ref is bumped everytime we queue the handler via the
cifs_queue_oplock_break() helper.
- The ref is decremented at the end of the handler
This bug was triggered by xfstest 464.
Also important fix to address the various reports of
oops in smb2_push_mandatory_locks
Signed-off-by: Aurelien Aptel <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
CC: Stable <[email protected]>
|
|
If we enter smb2_query_symlink() for something that is not a symlink
and where the SMB2_open() would succeed we would never end up
closing this handle and would thus leak a handle on the server.
Fix this by immediately calling SMB2_close() on successfull open.
Signed-off-by: Ronnie Sahlberg <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
|
|
There is a KASAN slab-out-of-bounds:
BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0
Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539
CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0xdd/0x12a
print_address_description+0xa7/0x540
kasan_report+0x1ff/0x550
check_memory_region+0x2f1/0x310
memcpy+0x2f/0x80
_copy_from_iter_full+0x783/0xaa0
tcp_sendmsg_locked+0x1840/0x4140
tcp_sendmsg+0x37/0x60
inet_sendmsg+0x18c/0x490
sock_sendmsg+0xae/0x130
smb_send_kvec+0x29c/0x520
__smb_send_rqst+0x3ef/0xc60
smb_send_rqst+0x25a/0x2e0
compound_send_recv+0x9e8/0x2af0
cifs_send_recv+0x24/0x30
SMB2_open+0x35e/0x1620
open_shroot+0x27b/0x490
smb2_open_op_close+0x4e1/0x590
smb2_query_path_info+0x2ac/0x650
cifs_get_inode_info+0x1058/0x28f0
cifs_root_iget+0x3bb/0xf80
cifs_smb3_do_mount+0xe00/0x14c0
cifs_do_mount+0x15/0x20
mount_fs+0x5e/0x290
vfs_kern_mount+0x88/0x460
do_mount+0x398/0x31e0
ksys_mount+0xc6/0x150
__x64_sys_mount+0xea/0x190
do_syscall_64+0x122/0x590
entry_SYSCALL_64_after_hwframe+0x44/0xa9
It can be reproduced by the following step:
1. samba configured with: server max protocol = SMB2_10
2. mount -o vers=default
When parse the mount version parameter, the 'ops' and 'vals'
was setted to smb30, if negotiate result is smb21, just
update the 'ops' to smb21, but the 'vals' is still smb30.
When add lease context, the iov_base is allocated with smb21
ops, but the iov_len is initiallited with the smb30. Because
the iov_len is longer than iov_base, when send the message,
copy array out of bounds.
we need to keep the 'ops' and 'vals' consistent.
Fixes: 9764c02fcbad ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)")
Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
Signed-off-by: ZhangXiaoxu <[email protected]>
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
|
|
There is a KASAN use-after-free:
BUG: KASAN: use-after-free in SMB2_read+0x1136/0x1190
Read of size 8 at addr ffff8880b4e45e50 by task ln/1009
Should not release the 'req' because it will use in the trace.
Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: ZhangXiaoxu <[email protected]>
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]> 4.18+
Reviewed-by: Pavel Shilovsky <[email protected]>
|
|
There is a KASAN use-after-free:
BUG: KASAN: use-after-free in SMB2_write+0x1342/0x1580
Read of size 8 at addr ffff8880b6a8e450 by task ln/4196
Should not release the 'req' because it will use in the trace.
Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: ZhangXiaoxu <[email protected]>
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]> 4.18+
Reviewed-by: Pavel Shilovsky <[email protected]>
|
|
On 32-bits platform with more than 32 registers, the 64 bits mask is
truncate to the lower 32 bits and the return value of hweight_long will
always smaller than 32. When kernel outputs more than 32 registers, but
the user perf program only counts 32, there will be a data mismatch
result to overflow check fail.
Signed-off-by: Mao Han <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Fixes: 6a21c0b5c2ab ("perf tools: Add core support for sampling intr machine state regs")
Fixes: d03f2170546d ("perf tools: Expand perf_event__synthesize_sample()")
Fixes: 0f6a30150ca2 ("perf tools: Support user regs and stack in sample parsing")
Link: http://lkml.kernel.org/r/29ad7947dc8fd1ff0abd2093a72cc27a2446be9f.1554883878.git.han_mao@c-sky.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There was a missing comparison with 0 when checking if type is "s64" or
"u64". Therefore, the body of the if-statement was entered if "type" was
"u64" or not "s64", which made the first strcmp() redundant since if
type is "u64", it's not "s64".
If type is "s64", the body of the if-statement is not entered but since
the remainder of the function consists of if-statements which will not
be entered if type is "s64", we will just return "val", which is
correct, albeit at the cost of a few more calls to strcmp(), i.e., it
will behave just as if the if-statement was entered.
If type is neither "s64" or "u64", the body of the if-statement will be
entered incorrectly and "val" returned. This means that any type that is
checked after "s64" and "u64" is handled the same way as "s64" and
"u64", i.e., the limiting of "val" to fit in for example "s8" is never
reached.
This was introduced in the kernel tree when the sources were copied from
trace-cmd in commit f7d82350e597 ("tools/events: Add files to create
libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei
("Implement typecasting in parser") when the function was introduced,
i.e., it has always behaved the wrong way.
Detected by cppcheck.
Signed-off-by: Rikard Falkeborn <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Arnaldo reported assertion in perf stat record:
assertion failed at util/header.c:875
There's no support for this in the 'perf state record' command, disable
the feature for that case.
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Fixes: 258031c017c3 ("perf header: Add DIR_FORMAT feature to describe directory data")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix following error using calls_view:
Query failed: ambiguous column name: parent_id Unable to execute statement
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Fixes: 8ce9a7251d11 ("perf scripts python: export-to-sqlite.py: Export calls parent_id")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix lock/unlock imbalances by refactoring the code a bit and adding
calls to up_write() before return.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Song Liu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Addresses-Coverity-ID: 1444315 ("Missing unlock")
Addresses-Coverity-ID: 1444316 ("Missing unlock")
Fixes: a70a1123174a ("perf bpf: Save BTF information as headers to perf.data")
Fixes: 606f972b1361 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Link: http://lkml.kernel.org/r/20190408173355.GA10501@embeddedor
[ Simplified the exit path to have just one up_write() + return ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clockevent/clocksource fixes from Daniel Lezcano:
- Fix TIMER_OF missing option dependency for npcm (Arnd Bergmann)
- Remove a pointless macro call for arm_arch_timer (Yangtao Li)
- Fix wrong compatible string for oxnas (Neil Armstrong)
- Fix compilation warning by removing a dead function on omap (Nathan Chancellor)
|
|
The ALSA proc helper manages the child nodes in a linked list, but its
addition and deletion is done without any lock. This leads to a
corruption if they are operated concurrently. Usually this isn't a
problem because the proc entries are added sequentially in the driver
probe procedure itself. But the card registrations are done often
asynchronously, and the crash could be actually reproduced with
syzkaller.
This patch papers over it by protecting the link addition and deletion
with the parent's mutex. There is "access" mutex that is used for the
file access, and this can be reused for this purpose as well.
Reported-by: [email protected]
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
In __apic_accept_irq() interface trig_mode is int and actually on some code
paths it is set above u8:
kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode
is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to
(1 << 15) & e->msi.data
kvm_apic_local_deliver sets it to reg & (1 << 15).
Fix the immediate issue by making 'tm' into u16. We may also want to adjust
__apic_accept_irq() interface and use proper sizes for vector, level,
trig_mode but this is not urgent.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
These were found with smatch, and then generalized when applicable.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Changed passing argument as "0 to NULL" which resolves below sparse warning
arch/x86/kvm/x86.c:3096:61: warning: Using plain integer as NULL pointer
Signed-off-by: Hariprasad Kelam <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a simple test for SMM, based on VMX. The test implements its own
sync between the guest and the host as using our ucall library seems to
be too cumbersome: SMI handler is happening in real-address mode.
This patch also fixes KVM_SET_NESTED_STATE to happen after
KVM_SET_VCPU_EVENTS, in fact it places it last. This is because
KVM needs to know whether the processor is in SMM or not.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
-no-pie was added to GCC at the same time as their configuration option
--enable-default-pie. Compilers that were built before do not have
-no-pie, but they also do not need it. Detect the option at build
time.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Starting state migration after an IO exit without first completing IO
may result in test failures. We already have two tests that need this
(this patch in fact fixes evmcs_test, similar to what was fixed for
state_test in commit 0f73bbc851ed, "KVM: selftests: complete IO before
migrating guest state", 2019-03-13) and a third is coming. So, move the
code to vcpu_save_state, and while at it do not access register state
until after I/O is complete.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Invoking the 64-bit variation on a 32-bit kenrel will crash the guest,
trigger a WARN, and/or lead to a buffer overrun in the host, e.g.
rsm_load_state_64() writes r8-r15 unconditionally, but enum kvm_reg and
thus x86_emulate_ctxt._regs only define r8-r15 for CONFIG_X86_64.
KVM allows userspace to report long mode support via CPUID, even though
the guest is all but guaranteed to crash if it actually tries to enable
long mode. But, a pure 32-bit guest that is ignorant of long mode will
happily plod along.
SMM complicates things as 64-bit CPUs use a different SMRAM save state
area. KVM handles this correctly for 64-bit kernels, e.g. uses the
legacy save state map if userspace has hid long mode from the guest,
but doesn't fare well when userspace reports long mode support on a
32-bit host kernel (32-bit KVM doesn't support 64-bit guests).
Since the alternative is to crash the guest, e.g. by not loading state
or explicitly requesting shutdown, unconditionally use the legacy SMRAM
save state map for 32-bit KVM. If a guest has managed to get far enough
to handle SMIs when running under a weird/buggy userspace hypervisor,
then don't deliberately crash the guest since there are no downsides
(from KVM's perspective) to allow it to continue running.
Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save
state area, i.e. don't save/restore EFER across SMM transitions. KVM
somewhat models this, e.g. doesn't clear EFER on entry to SMM if the
guest doesn't support long mode. But during RSM, KVM unconditionally
clears EFER so that it can get back to pure 32-bit mode in order to
start loading CRs with their actual non-SMM values.
Clear EFER only when it will be written when loading the non-SMM state
so as to preserve bits that can theoretically be set on 32-bit vCPUs,
e.g. KVM always emulates EFER_SCE.
And because CR4.PAE is cleared only to play nice with EFER, wrap that
code in the long mode check as well. Note, this may result in a
compiler warning about cr4 being consumed uninitialized. Re-read CR4
even though it's technically unnecessary, as doing so allows for more
readable code and RSM emulation is not a performance critical path.
Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
RSM emulation is currently broken on VMX when the interrupted guest has
CR4.VMXE=1. Stop dancing around the issue of HF_SMM_MASK being set when
loading SMSTATE into architectural state, e.g. by toggling it for
problematic flows, and simply clear HF_SMM_MASK prior to loading
architectural state (from SMRAM save state area).
Reported-by: Jon Doron <[email protected]>
Cc: Jim Mattson <[email protected]>
Cc: Liran Alon <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Fixes: 5bea5123cbf0 ("KVM: VMX: check nested state and CR4.VMXE against SMM")
Signed-off-by: Sean Christopherson <[email protected]>
Tested-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Prepare for clearing HF_SMM_MASK prior to loading state from the SMRAM
save state map, i.e. kvm_smm_changed() needs to be called after state
has been loaded and so cannot be done automatically when setting
hflags from RSM.
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
RSM emulation is currently broken on VMX when the interrupted guest has
CR4.VMXE=1. Rather than dance around the issue of HF_SMM_MASK being set
when loading SMSTATE into architectural state, ideally RSM emulation
itself would be reworked to clear HF_SMM_MASK prior to loading non-SMM
architectural state.
Ostensibly, the only motivation for having HF_SMM_MASK set throughout
the loading of state from the SMRAM save state area is so that the
memory accesses from GET_SMSTATE() are tagged with role.smm. Load
all of the SMRAM save state area from guest memory at the beginning of
RSM emulation, and load state from the buffer instead of reading guest
memory one-by-one.
This paves the way for clearing HF_SMM_MASK prior to loading state,
and also aligns RSM with the enter_smm() behavior, which fills a
buffer and writes SMRAM save state in a single go.
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Issue was discovered when running kvm-unit-tests on KVM running as L1 on
top of Hyper-V.
When vmx_instruction_intercept unit-test attempts to run RDPMC to test
RDPMC-exiting, it is intercepted by L1 KVM which it's EXIT_REASON_RDPMC
handler raise #GP because vCPU exposed by Hyper-V doesn't support PMU.
Instead of unit-test expectation to be reflected with EXIT_REASON_RDPMC.
The reason vmx_instruction_intercept unit-test attempts to run RDPMC
even though Hyper-V doesn't support PMU is because L1 expose to L2
support for RDPMC-exiting. Which is reasonable to assume that is
supported only in case CPU supports PMU to being with.
Above issue can easily be simulated by modifying
vmx_instruction_intercept config in x86/unittests.cfg to run QEMU with
"-cpu host,+vmx,-pmu" and run unit-test.
To handle issue, change KVM to expose RDPMC-exiting only when guest
supports PMU.
Reported-by: Saar Amar <[email protected]>
Reviewed-by: Mihai Carabas <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Before this change, reading a VMware pseduo PMC will succeed even when
PMU is not supported by guest. This can easily be seen by running
kvm-unit-test vmware_backdoors with "-cpu host,-pmu" option.
Reviewed-by: Mihai Carabas <[email protected]>
Signed-off-by: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
guest xcr0 could leak into host when MCE happens in guest mode. Because
do_machine_check() could schedule out at a few places.
For example:
kvm_load_guest_xcr0
...
kvm_x86_ops->run(vcpu) {
vmx_vcpu_run
vmx_complete_atomic_exit
kvm_machine_check
do_machine_check
do_memory_failure
memory_failure
lock_page
In this case, host_xcr0 is 0x2ff, guest vcpu xcr0 is 0xff. After schedule
out, host cpu has guest xcr0 loaded (0xff).
In __switch_to {
switch_fpu_finish
copy_kernel_to_fpregs
XRSTORS
If any bit i in XSTATE_BV[i] == 1 and xcr0[i] == 0, XRSTORS will
generate #GP (In this case, bit 9). Then ex_handler_fprestore kicks in
and tries to reinitialize fpu by restoring init fpu state. Same story as
last #GP, except we get DOUBLE FAULT this time.
Cc: [email protected]
Signed-off-by: WANG Chao <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
I noticed that apic test from kvm-unit-tests always hangs on my EPYC 7401P,
the hanging test nmi-after-sti is trying to deliver 30000 NMIs and tracing
shows that we're sometimes able to deliver a few but never all.
When we're trying to inject an NMI we may fail to do so immediately for
various reasons, however, we still need to inject it so enable_nmi_window()
arms nmi_singlestep mode. #DB occurs as expected, but we're not checking
for pending NMIs before entering the guest and unless there's a different
event to process, the NMI will never get delivered.
Make KVM_REQ_EVENT request on the vCPU from db_interception() to make sure
pending NMIs are checked and possibly injected.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Only clear the valid bit when invalidate logical APIC id entry.
The current logic clear the valid bit, but also set the rest of
the bits (including reserved bits) to 1.
Fixes: 98d90582be2e ('svm: Fix AVIC DFR and LDR handling')
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This reverts commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57.
As Oren Twaig pointed out the old discussion:
https://patchwork.kernel.org/patch/8292231/
that the change coud potentially cause an extra IPI to be sent to
the destination vcpu because the AVIC hardware already set the IRR bit
before the incomplete IPI #VMEXIT with id=1 (target vcpu is not running).
Since writting to ICR and ICR2 will also set the IRR. If something triggers
the destination vcpu to get scheduled before the emulation finishes, then
this could result in an additional IPI.
Also, the issue mentioned in the commit bb218fbcfaaa was misdiagnosed.
Cc: Radim Krčmář <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Reported-by: Oren Twaig <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
KVM bases its memory usage limits on the total number of guest pages
across all memslots. However, those limits, and the calculations to
produce them, use 32 bit unsigned integers. This can result in overflow
if a VM has more guest pages that can be represented by a u32. As a
result of this overflow, KVM can use a low limit on the number of MMU
pages it will allocate. This makes KVM unable to map all of guest memory
at once, prompting spurious faults.
Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch
introduced no new failures.
Signed-off-by: Ben Gardon <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The remaining failures of vmx.flat when EPT is disabled are caused by
incorrectly reflecting VMfails to the L1 hypervisor. What happens is
that nested_vmx_restore_host_state corrupts the guest CR3, reloading it
with the host's shadow CR3 instead, because it blindly loads GUEST_CR3
from the vmcs01.
For simplicity let's just always use hardware VMCS checks when EPT is
disabled. This way, nested_vmx_restore_host_state is not reached at
all (or at least shouldn't be reached).
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
err_spi is used when SERIAL_SC16IS7XX_SPI is enabled, so make
the label only available under SERIAL_SC16IS7XX_SPI option.
Otherwise, the below warning appears.
drivers/tty/serial/sc16is7xx.c:1523:1: warning: label ‘err_spi’ defined but not used [-Wunused-label]
err_spi:
^~~~~~~
Signed-off-by: Guoqing Jiang <[email protected]>
Fixes: ac0cdb3d9901 ("sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The calculation of the sampling point has min() and max() exchanged.
Fix this by using the clamp() helper instead.
Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Ulrich Hecht <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Acked-by: Dirk Behme <[email protected]>
Cc: stable <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There are several issues with the formula used for calculating the
deviation from the intended rate:
1. While min_err and last_stop are signed, srr and baud are unsigned.
Hence the signed values are promoted to unsigned, which will lead
to a bogus value of deviation if min_err is negative,
2. Srr is the register field value, which is one less than the actual
sampling rate factor,
3. The divisions do not use rounding.
Fix this by casting unsigned variables to int, adding one to srr, and
using a single DIV_ROUND_CLOSEST().
Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Cc: stable <[email protected]>
Reviewed-by: Ulrich Hecht <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit 008258d995a6 ("clocksource/drivers/timer-ti-dm: Make
omap_dm_timer_set_load_start() static") made omap_dm_time_set_load_start
static because its prototype was not defined in a header. Unfortunately,
this causes a build warning on multi_v7_defconfig because this function
is not used anywhere in this translation unit:
drivers/clocksource/timer-ti-dm.c:589:12: error: unused function
'omap_dm_timer_set_load_start' [-Werror,-Wunused-function]
In fact, omap_dm_timer_set_load_start hasn't been used anywhere since
commit f190be7f39a5 ("staging: tidspbridge: remove driver") and the
prototype was removed in commit 592ea6bd1fad ("clocksource: timer-ti-dm:
Make unexported functions static"), which is probably where this should
have happened.
Fixes: 592ea6bd1fad ("clocksource: timer-ti-dm: Make unexported functions static")
Fixes: 008258d995a6 ("clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static")
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
|