aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-18net: gemini: remove unnecessary assertJakub Kicinski1-2/+0
The driver does not advertize NETIF_F_FRAGLIST, the stack can't pass skbs with frags lists to the xmit function. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18net/sched: taprio: fix build without 64bit divJakub Kicinski1-6/+11
Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18sb1000: fix variable set but not used warningsJakub Kicinski1-6/+3
GCC 8 complains: drivers/net/sb1000.c: In function ‘card_send_command’: drivers/net/sb1000.c:319:14: warning: variable ‘x’ set but not used [-Wunused-but-set-variable] int status, x; ^ drivers/net/sb1000.c: In function ‘sb1000_check_CRC’: drivers/net/sb1000.c:493:6: warning: variable ‘crc’ set but not used [-Wunused-but-set-variable] int crc, status; ^~~ Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18l2tp: fix set but not used variableJakub Kicinski1-2/+1
GCC complains: net/l2tp/l2tp_ppp.c: In function ‘pppol2tp_ioctl’: net/l2tp/l2tp_ppp.c:1073:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] int val; ^~~ Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18bpf: move BPF_PROG_TYPE_FLOW_DISSECTOR documentation to a new common placeStanislav Fomichev3-4/+4
In commit da7031491786 ("bpf: Document BPF_PROG_TYPE_CGROUP_SYSCTL") Andrey proposes to put per-prog type docs under Documentation/bpf/ Let's move flow dissector documentation there as well. Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-18ipv6: Add rate limit mask for ICMPv6 messagesStephen Suryaputra6-10/+60
To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP message types use larger numeric values, a simple bitmask doesn't fit. I use large bitmap. The input and output are the in form of list of ranges. Set the default to rate limit all error messages but Packet Too Big. For Packet Too Big, use ratemask instead of hard-coded. There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow() aren't called. This patch only adds them to icmpv6_echo_reply(). Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says that it is also acceptable to rate limit informational messages. Thus, I removed the current hard-coded behavior of icmpv6_mask_allow() that doesn't rate limit informational messages. v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL isn't defined, expand the description in ip-sysctl.txt and remove unnecessary conditional before kfree(). v3: Inline the bitmap instead of dynamically allocated. Still is a pointer to it is needed because of the way proc_do_large_bitmap work. Signed-off-by: Stephen Suryaputra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18net/tls: fix refcount adjustment in fallbackJakub Kicinski1-3/+10
Unlike atomic_add(), refcount_add() does not deal well with a negative argument. TLS fallback code reallocates the skb and is very likely to shrink the truesize, leading to: [ 189.513254] WARNING: CPU: 5 PID: 0 at lib/refcount.c:81 refcount_add_not_zero_checked+0x15c/0x180 Call Trace: refcount_add_checked+0x6/0x40 tls_enc_skb+0xb93/0x13e0 [tls] Once wmem_allocated count saturates the application can no longer send data on the socket. This is similar to Eric's fixes for GSO, TCP: commit 7ec318feeed1 ("tcp: gso: avoid refcount_t warning from tcp_gso_segment()") and UDP: commit 575b65bc5bff ("udp: avoid refcount_t saturation in __udp_gso_segment()"). Unlike the GSO case, for TLS fallback it's likely that the skb has shrunk, so the "likely" annotation is the other way around (likely branch being "sub"). Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: John Hurley <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18net: phy: remove dead code from phy_sanitize_settingsHeiner Kallweit1-4/+0
phy_sanitize_settings() is called from phy_start_aneg() only, and only if phydev->autoneg isn't set. Therefore the removed code does nothing. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18bpf: Increase MAX_NR_MAPS to 17 in test_verifier.cMartin KaFai Lau1-1/+1
map_fds[16] is the last one index-ed by fixup_map_array_small. Hence, the MAX_NR_MAPS should be 17 instead. Fixes: fb2abb73e575 ("bpf, selftest: test {rd, wr}only flags and direct value access") Signed-off-by: Martin KaFai Lau <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-18net: phy: don't set autoneg if it's not supportedHeiner Kallweit1-0/+4
In phy_device_create() we set phydev->autoneg = 1. This isn't changed even if the PHY doesn't support autoneg. This seems to affect very few PHY's, and they disable phydev->autoneg in their config_init callback. So it's more of an improvement, therefore net-next. The patch also wouldn't apply to older kernel versions because the link mode bitmaps have been introduced recently. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18selftests/bpf: fix compile errors due to unsync linux/in6.h and netinet/in.hWang YanQing2-2/+2
I meet below compile errors: " In file included from test_tcpnotify_kern.c:12: /usr/include/netinet/in.h:101:5: error: expected identifier IPPROTO_HOPOPTS = 0, /* IPv6 Hop-by-Hop options. */ ^ /usr/include/linux/in6.h:131:26: note: expanded from macro 'IPPROTO_HOPOPTS' ^ In file included from test_tcpnotify_kern.c:12: /usr/include/netinet/in.h:103:5: error: expected identifier IPPROTO_ROUTING = 43, /* IPv6 routing header. */ ^ /usr/include/linux/in6.h:132:26: note: expanded from macro 'IPPROTO_ROUTING' ^ In file included from test_tcpnotify_kern.c:12: /usr/include/netinet/in.h:105:5: error: expected identifier IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header. */ ^ /usr/include/linux/in6.h:133:26: note: expanded from macro 'IPPROTO_FRAGMENT' " The same compile errors are reported for test_tcpbpf_kern.c too. My environment: lsb_release -a: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.6 LTS Release: 16.04 Codename: xenial dpkg -l | grep libc-dev: ii libc-dev-bin 2.23-0ubuntu11 amd64 GNU C Library: Development binaries ii linux-libc-dev:amd64 4.4.0-145.171 amd64 Linux Kernel Headers for development. The reason is linux/in6.h and netinet/in.h aren't synchronous about how to handle the same definitions, IPPROTO_HOPOPTS, etc. This patch fixes the compile errors by moving <netinet/in.h> to before the <linux/*.h>. Signed-off-by: Wang YanQing <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-18libbpf: remove compile time warning from libbpf_util.hMagnus Karlsson1-1/+1
Having a helpful compile time warning in libbpf_util.h is not a good idea since all warnings are treated as errors. Change this into a comment in the code instead. Fixes: b7e3a28019c9 ("libbpf: remove dependency on barrier.h in xsk.h") Signed-off-by: Magnus Karlsson <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-18bpf: Document BPF_PROG_TYPE_CGROUP_SYSCTLAndrey Ignatov2-0/+134
Add documentation for BPF_PROG_TYPE_CGROUP_SYSCTL, including general info, attach type, context, return code, helpers, example and usage considerations. A separate file prog_cgroup_sysctl.rst is added to Documentation/bpf/. In the future more program types can be documented in their own prog_<name>.rst files. Another way to place program type specific documentation would be to group program types somehow (e.g. cgroup.rst for all cgroup-bpf programs), but it may not scale well since some program types may belong to different groups, e.g. BPF_PROG_TYPE_CGROUP_SKB can be documented together with either cgroup-bpf programs or programs that access skb. The new file is added to the index and verified by `make htmldocs` / sanity-check by lynx. Signed-off-by: Andrey Ignatov <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-18stmmac: pci: Adjust IOT2000 matchingSu Bao Cheng1-2/+6
Since there are more IOT2040 variants with identical hardware but different asset tags, the asset tag matching should be adjusted to support them. For the board name "SIMATIC IOT2000", currently there are 2 types of hardware, IOT2020 and IOT2040. The IOT2020 is identified by its unique asset tag. Match on it first. If we then match on the board name only, we will catch all IOT2040 variants. In the future there will be no other devices with the "SIMATIC IOT2000" DMI board name but different hardware. Signed-off-by: Su Bao Cheng <[email protected]> Reviewed-by: Jan Kiszka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18firestream: fix spelling mistake "tramsitted" -> "transmitted"Colin Ian King1-1/+1
There is a spelling mistake in a debug message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18Merge branch '100GbE' of ↵David S. Miller27-457/+3201
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-04-18 This series contains updates to the ice driver only. Anirudh fixes up code comments which had typos. Added support for DCB into the ice driver, which required a bit of refactoring of the existing code. Also fixed a potential race condition between closing and opening the VSI for a MIB change event, so resolved this by grabbing the rtnl_lock prior to closing. Added support to process LLDP MIB change notifications. Added support for reporting DCB stats via ethtool. Brett updates the calculation to increment ITR to use a direct calculation instead of using estimations. This provides a more accurate value. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-18Merge tag 'wireless-drivers-next-for-davem-2019-04-18' of ↵David S. Miller85-1142/+1979
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Nothing really special standing out this time, iwlwifi being the most active driver. Major changes: iwlwifi * send NO_DATA events so they can be captured in radiotap * support for multiple BSSID * support for some new FW API versions * support new hardware * debugfs cleanups by Greg-KH qtnfmac * allow each MAC to specify its own regulatory rules ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-18net: ipv6: addrlabel: fix spelling mistake "requewst" -> "request"Colin Ian King1-1/+1
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message, fix it. Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18Merge branch 'mlxsw-Few-small-fixes'David S. Miller2-4/+4
Ido Schimmel says: ==================== mlxsw: Few small fixes Patch #1, from Petr, adjusts mlxsw to provide the same QoS behavior for both Spectrum-1 and Spectrum-2. The fix is required due to a difference in the behavior of Spectrum-2 compared to Spectrum-1. The problem and solution are described in the detail in the changelog. Patch #2 increases the time period in which the driver waits for the firmware to signal it has finished its initialization. The issue will be fixed in future firmware versions and the timeout will be decreased. Patch #3, from Amit, fixes a display problem where the autoneg status in ethtool is not updated in case the netdev is not running. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-18mlxsw: spectrum: Fix autoneg status in ethtoolAmit Cohen1-2/+2
If link is down and autoneg is set to on/off, the status in ethtool does not change. The reason is when the link is down the function returns with zero before changing autoneg value. Move the checking of link state (up/down) to be performed after setting autoneg value, in order to be sure that autoneg will change in any case. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18mlxsw: pci: Reincrease PCI reset timeoutIdo Schimmel1-1/+1
During driver initialization the driver sends a reset to the device and waits for the firmware to signal that it is ready to continue. Commit d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout") increased the timeout to 13 seconds due to longer PHY calibration in Spectrum-2 compared to Spectrum-1. Recently it became apparent that this timeout is too short and therefore this patch increases it again to a safer limit that will be reduced in the future. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Fixes: d2f372ba0914 ("mlxsw: pci: Increase PCI SW reset timeout") Signed-off-by: Ido Schimmel <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18mlxsw: spectrum: Put MC TCs into DWRR modePetr Machata1-1/+1
Both Spectrum-1 and Spectrum-2 chips are currently configured such that pairs of TC n (which is used for UC traffic) and TC n+8 (which is used for MC traffic) are feeding into the same subgroup. Strict prioritization is configured between the two TCs, and by enabling MC-aware mode on the switch, the lower-numbered (UC) TCs are favored over the higher-numbered (MC) TCs. On Spectrum-2 however, there is an issue in configuration of the MC-aware mode. As a result, MC traffic is prioritized over UC traffic. To work around the issue, configure the MC TCs with DWRR mode (while keeping the UC TCs in strict mode). With this patch, the multicast-unicast arbitration results in the same behavior on both Spectrum-1 and Spectrum-2 chips. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-18Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Avoid compiler uninitialised warning introduced by recent arm64 futex fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: futex: Restore oldval initialization to work around buggy compilers
2019-04-18arm64: futex: Restore oldval initialization to work around buggy compilersNathan Chancellor1-1/+1
Commit 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") removed oldval's zero initialization in arch_futex_atomic_op_inuser because it is not necessary. Unfortunately, Android's arm64 GCC 4.9.4 [1] does not agree: ../kernel/futex.c: In function 'do_futex': ../kernel/futex.c:1658:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] return oldval == cmparg; ^ In file included from ../kernel/futex.c:73:0: ../arch/arm64/include/asm/futex.h:53:6: note: 'oldval' was declared here int oldval, ret, tmp; ^ GCC fails to follow that when ret is non-zero, futex_atomic_op_inuser returns right away, avoiding the uninitialized use that it claims. Restoring the zero initialization works around this issue. [1]: https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/ Cc: [email protected] Fixes: 045afc24124d ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2019-04-18ice: Calculate ITR increment based on direct calculationBrett Creeley1-72/+63
Currently when calculating how much to increment ITR by inside of ice_update_itr() we do some estimations and intermediate calculations. Instead of doing estimations, just do the calculation directly. This allows for a more accurate value and it makes it easier for the next person to understand and update. Also, remove the dividing the ITR value by 2 when latency driven because the ITR values are already so low for 100Gbps speed. This should help get to the desired ITR value faster. Signed-off-by: Brett Creeley <[email protected]> Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Bump driver versionAnirudh Venkataramanan1-1/+1
Update driver version to 0.7.4 Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code to control FW LLDP and DCBXAnirudh Venkataramanan5-2/+159
This patch adds code to start or stop LLDP and DCBX in firmware through use of ethtool private flags. Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code for DCB rebuildAnirudh Venkataramanan3-0/+85
This patch introduces a new function ice_dcb_rebuild which reinitializes DCB after a reset. Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code to get DCB related statisticsAnirudh Venkataramanan6-2/+86
This patch adds a new function ice_update_dcb_stats to get DCB stats from the hardware and ethtool support for displaying these stats. Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add priority information into VLAN headerAnirudh Venkataramanan4-3/+54
This patch introduces a new function ice_tx_prepare_vlan_flags_dcb to insert 802.1p priority information into the VLAN header Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Update rings based on TC informationAnirudh Venkataramanan5-0/+52
This patch adds a new function ice_vsi_cfg_dcb_rings which updates a VSI's rings based on DCB traffic class information. Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code to process LLDP MIB change eventsAnirudh Venkataramanan5-3/+47
This patch adds support to process LLDP MIB change notifications sent by the firmware. Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code for DCB initialization part 4/4Anirudh Venkataramanan2-2/+81
When the firmware doesn't support LLDP or DCBX, the driver should switch to "software LLDP mode". This patch adds support for the same. Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code for DCB initialization part 3/4Anirudh Venkataramanan14-82/+997
This patch adds a new function ice_pf_dcb_cfg (and related helpers) which applies the DCB configuration obtained from the firmware. As part of this, VSIs/netdevs are updated with traffic class information. This patch requires a bit of a refactor of existing code. 1. For a MIB change event, the associated VSI is closed and brought up again. The gap between closing and opening the VSI can cause a race condition. Fix this by grabbing the rtnl_lock prior to closing the VSI and then only free it after re-opening the VSI during a MIB change event. 2. ice_sched_query_elem is used in ice_sched.c and with this patch, in ice_dcb.c as well. However, ice_dcb.c is not built when CONFIG_DCB is unset. This results in namespace warnings (ice_sched.o: Externally defined symbols with no external references) when CONFIG_DCB is unset. To avoid this move ice_sched_query_elem from ice_sched.c to ice_common.c. Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code for DCB initialization part 2/4Anirudh Venkataramanan6-1/+1057
This patch introduces a new top level function ice_init_dcb (and related lower level helper functions) which continues the DCB init flow. This function uses ice_get_dcb_cfg to get, parse and store the DCB configuration. Once this is done, it sets itself up to be notified by the firmware on LLDP MIB change events. Reviewed-by: Bruce Allan <[email protected]> Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Add code for DCB initialization part 1/4Anirudh Venkataramanan10-0/+230
This patch introduces a skeleton for ice_init_pf_dcb, the top level function for DCB initialization. Subsequent patches will add to this DCB init flow. In this patch, ice_init_pf_dcb checks if DCB is a supported capability. If so, an admin queue call to start the LLDP and DCBx in firmware is issued. If not, an error is reported. Note that we don't fail the driver init if DCB init fails. Reviewed-by: Bruce Allan <[email protected]> Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Bump versionAnirudh Venkataramanan1-1/+1
Bump driver version to 0.7.3 Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Fix incorrect use of abbreviationsAnirudh Venkataramanan16-294/+294
Capitalize abbreviations and spell out some that aren't obvious. Reviewed-by: Bruce Allan <[email protected]> Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18ice: Fix typos in code commentsAnirudh Venkataramanan4-6/+6
This patch fixes typos in code comments. Reviewed-by: Bruce Allan <[email protected]> Signed-off-by: Anirudh Venkataramanan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-04-18signal: use fdget() since we don't allow O_PATHChristian Brauner1-1/+1
As stated in the original commit for pidfd_send_signal() we don't allow to signal processes through O_PATH file descriptors since it is semantically equivalent to a write on the pidfd. We already correctly error out right now and return EBADF if an O_PATH fd is passed. This is because we use file->f_op to detect whether a pidfd is passed and O_PATH fds have their file->f_op set to empty_fops in do_dentry_open() and thus fail the test. Thus, there is no regression. It's just semantically correct to use fdget() and return an error right from there instead of taking a reference and returning an error later. Signed-off-by: Christian Brauner <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: "Eric W. Biederman" <[email protected]> Cc: Kees Cook <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Jann Horn <[email protected]> Cc: David Howells <[email protected]> Cc: "Michael Kerrisk (man-pages)" <[email protected]> Cc: Andy Lutomirsky <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Aleksa Sarai <[email protected]> Cc: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-04-18Merge tag 's390-5.1-3' of ↵Linus Torvalds11-16/+22
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 bug fixes from Martin Schwidefsky: - Fix overwrite of the initial ramdisk due to misuse of IS_ENABLED - Fix integer overflow in the dasd driver resulting in incorrect number of blocks for large devices - Fix a lockdep false positive in the 3270 driver - Fix a deadlock in the zcrypt driver - Fix incorrect debug feature entries in the pkey api - Fix inline assembly constraints fallout with CONFIG_KASAN=y * tag 's390-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: correct some inline assembly constraints s390/pkey: add one more argument space for debug feature entry s390/zcrypt: fix possible deadlock situation on ap queue remove s390/3270: fix lockdep false positive on view->lock s390/dasd: Fix capacity calculation for large volumes s390/mem_detect: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD)
2019-04-18Merge tag 'afs-fixes-20190413' of ↵Linus Torvalds7-11/+10
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: - Stop using the deprecated get_seconds(). - Don't make tracepoint strings const as the section they go in isn't read-only. - Differentiate failure due to unmarshalling from other failure cases. We shouldn't abort with RXGEN_CC/SS_UNMARSHAL if it's not due to unmarshalling. - Add a missing unlock_page(). - Fix the interaction between receiving a notification from a server that it has invalidated all outstanding callback promises and a client call that we're in the middle of making that will get a new promise. * tag 'afs-fixes-20190413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix in-progess ops to ignore server-level callback invalidation afs: Unlock pages for __pagevec_release() afs: Differentiate abort due to unmarshalling from other errors afs: Avoid section confusion in CM_NAME afs: avoid deprecated get_seconds()
2019-04-18Merge branch 'linus' of ↵Linus Torvalds3-13/+67
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a bug in the implementation of the x86 accelerated version of poly1305" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/poly1305 - fix overflow during partial reduction
2019-04-18Merge tag 'drm-fixes-2019-04-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds10-18/+58
Pull drm fixes from Dave Airlie: "Since Easter is looming for me, I'm just pushing whatever is in my tree, I'll see what else turns up and maybe I'll send another pull early next week if there is anything. tegra: - stream id programming fix - avoid divide by 0 for bad hdmi audio setup code ttm: - Hugepages fix - refcount imbalance in error path fix amdgpu: - GPU VM fixes for Vega/RV - DC AUX fix for active DP-DVI dongles - DC fix for multihead regression" * tag 'drm-fixes-2019-04-18' of git://anongit.freedesktop.org/drm/drm: drm/tegra: hdmi: Setup audio only if configured drm/amd/display: If one stream full updates, full update all planes drm/amdgpu/gmc9: fix VM_L2_CNTL3 programming drm/amdgpu: shadow in shadow_list without tbo.mem.start cause page fault in sriov TDR gpu: host1x: Program stream ID to bypass without SMMU drm/amd/display: extending AUX SW Timeout drm/ttm: fix dma_fence refcount imbalance on error path drm/ttm: fix incrementing the page pointer for huge pages drm/ttm: fix start page for huge page check in ttm_put_pages() drm/ttm: fix out-of-bounds read in ttm_put_pages() v2
2019-04-18rtlwifi: rtl8188ee: Remove extraneous fileLarry Finger1-10/+0
Somehow file drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c.rej was incorporated into the sources. Obviously, it can be removed. Signed-off-by: Larry Finger <[email protected]> Reported-by: Andrew Morton <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-18timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze()Chang-An Chen3-2/+11
tick_freeze() introduced by suspend-to-idle in commit 124cf9117c5f ("PM / sleep: Make it possible to quiesce timers during suspend-to-idle") uses timekeeping_suspend() instead of syscore_suspend() during suspend-to-idle. As a consequence generic sched_clock will keep going because sched_clock_suspend() and sched_clock_resume() are not invoked during suspend-to-idle which can result in a generic sched_clock wrap. On a ARM system with suspend-to-idle enabled, sched_clock is registered as "56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns", which means the real wrapping duration is 8796093022202ns. [ 134.551779] suspend-to-idle suspend (timekeeping_suspend()) [ 1204.912239] suspend-to-idle resume (timekeeping_resume()) ...... [ 1206.912239] suspend-to-idle suspend (timekeeping_suspend()) [ 5880.502807] suspend-to-idle resume (timekeeping_resume()) ...... [ 6000.403724] suspend-to-idle suspend (timekeeping_suspend()) [ 8035.753167] suspend-to-idle resume (timekeeping_resume()) ...... [ 8795.786684] (2)[321:charger_thread]...... [ 8795.788387] (2)[321:charger_thread]...... [ 0.057226] (0)[0:swapper/0]...... [ 0.061447] (2)[0:swapper/2]...... sched_clock was not stopped during suspend-to-idle, and sched_clock_poll hrtimer was not expired because timekeeping_suspend() was invoked during suspend-to-idle. It makes sched_clock wrap at kernel time 8796s. To prevent this, invoke sched_clock_suspend() and sched_clock_resume() in tick_freeze() together with timekeeping_suspend() and timekeeping_resume(). Fixes: 124cf9117c5f (PM / sleep: Make it possible to quiesce timers during suspend-to-idle) Signed-off-by: Chang-An Chen <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: John Stultz <[email protected]> Cc: Kees Cook <[email protected]> Cc: Corey Minyard <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: Stanley Chu <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-04-18perf/x86/amd: Add event map for AMD Family 17hKim Phillips1-9/+26
Family 17h differs from prior families by: - Does not support an L2 cache miss event - It has re-enumerated PMC counters for: - L2 cache references - front & back end stalled cycles So we add a new amd_f17h_perfmon_event_map[] so that the generic perf event names will resolve to the correct h/w events on family 17h and above processors. Reference sections 2.1.13.3.3 (stalls) and 2.1.13.3.6 (L2): https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf Signed-off-by: Kim Phillips <[email protected]> Cc: <[email protected]> # v4.9+ Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Janakarajan Natarajan <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Martin Liška <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Pu Wen <[email protected]> Cc: Suravee Suthikulpanit <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors") [ Improved the formatting a bit. ] Signed-off-by: Ingo Molnar <[email protected]>
2019-04-18x86/mm/KASLR: Fix the size of the direct mapping sectionBaoquan He1-1/+1
kernel_randomize_memory() uses __PHYSICAL_MASK_SHIFT to calculate the maximum amount of system RAM supported. The size of the direct mapping section is obtained from the smaller one of the below two values: (actual system RAM size + padding size) vs (max system RAM size supported) This calculation is wrong since commit b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52"). In it, __PHYSICAL_MASK_SHIFT was changed to be 52, regardless of whether the kernel is using 4-level or 5-level page tables. Thus, it will always use 4 PB as the maximum amount of system RAM, even in 4-level paging mode where it should actually be 64 TB. Thus, the size of the direct mapping section will always be the sum of the actual system RAM size plus the padding size. Even when the amount of system RAM is 64 TB, the following layout will still be used. Obviously KALSR will be weakened significantly. |____|_______actual RAM_______|_padding_|______the rest_______| 0 64TB ~120TB Instead, it should be like this: |____|_______actual RAM_______|_________the rest______________| 0 64TB ~120TB The size of padding region is controlled by CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING, which is 10 TB by default. The above issue only exists when CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING is set to a non-zero value, which is the case when CONFIG_MEMORY_HOTPLUG is enabled. Otherwise, using __PHYSICAL_MASK_SHIFT doesn't affect KASLR. Fix it by replacing __PHYSICAL_MASK_SHIFT with MAX_PHYSMEM_BITS. [ bp: Massage commit message. ] Fixes: b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52") Signed-off-by: Baoquan He <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Thomas Garnier <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Kees Cook <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: x86-ml <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/20190417083536.GE7065@MiWiFi-R3L-srv
2019-04-17s390: ctcm: fix ctcm_new_device error return codeArnd Bergmann1-0/+1
clang points out that the return code from this function is undefined for one of the error paths: ../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (priv->channel[direction] == NULL) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here return result; ^~~~~~ ../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false if (priv->channel[direction] == NULL) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning int result; ^ Make it return -ENODEV here, as in the related failure cases. gcc has a known bug in underreporting some of these warnings when it has already eliminated the assignment of the return code based on some earlier optimization step. Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-17nfp: abm: fix spelling mistake "offseting" -> "offsetting"Colin Ian King1-2/+2
There are a couple of spelling mistakes in NL_SET_ERR_MSG_MOD error messages. Fix these. Signed-off-by: Colin Ian King <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.