| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The method of hem free for SCC context is different from qp context.
In the current version, if free SCC hem during the execution of qp free,
there may be smmu error as below:
arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00007d0000000010
arm-smmu-v3 arm-smmu-v3.1.auto: 0x000012000000017c
arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000000009e0
arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000
As SCC context is still used by hardware after qp free, we can solve this
problem by removing SCC hem free from hns_roce_qp_free.
Fixes: 6a157f7d1b14 ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: Yangyang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Overwrite retains the security state after completion of operation. Fix
nfit_test to reflect this so that the kernel can test the behavior it is
more likely to see in practice.
Fixes: 926f74802cb1 ("tools/testing/nvdimm: Add overwrite support for nfit_test")
Signed-off-by: Dave Jiang <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page. This
patch fixes this problem.
Unable to handle kernel paging request at virtual address ffff00006e3cd000
...
Call trace:
hns_roce_write_mtt+0x154/0x2f0 [hns_roce]
hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce]
hns_roce_create_srq+0x74c/0x808 [hns_roce]
ib_create_srq+0x28/0xc8
Fixes: 0203b14c4f32 ("RDMA/hns: Unify the calculation for hem index in hip08")
Signed-off-by: chenglang <[email protected]>
Signed-off-by: Lijun Ou <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak.
Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Kamal Heib <[email protected]>
Acked-by: Adit Ranadive <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The ftrace trampoline code (which deals with modules loaded out of
BL range of the core kernel) uses plt_entries_equal() to check whether
the per-module trampoline equals a zero buffer, to decide whether the
trampoline has already been initialized.
This triggers a BUG() in the opcode manipulation code, since we end
up checking the ADRP offset of a 0x0 opcode, which is not an ADRP
instruction.
So instead, add a helper to check whether a PLT is initialized, and
call that from the frace code.
Cc: <[email protected]> # v5.0
Fixes: bdb85cd1d206 ("arm64/module: switch to ADRP/ADD sequences for PLT entries")
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The only bpc information in pipe registers for BXT/GLK DSI
is the PIPEMISC dither bpc. Let's try to use that to read
out pipe_bpp on these platforms. However, I'm not sure if
this will be correctly populated by the GOP since bspec
suggests it's only needed if dithering is actually enabled.
If not I guess we'll have to go one step further and
extract pipe_bpp from the DSI pixel format when dithering
is disabled.
Cc: Hans de Goede <[email protected]>
Fixes: ca0b04db14a5 ("drm/i915/dsi: Fix pipe_bpp for handling for 6 bpc pixel-formats")
References: https://bugs.freedesktop.org/show_bug.cgi?id=109516
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 499653501baf27d26e73cb5ce744869df3400509)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
[Why]
If the cursor pos passed from DM is less than the plane_state->dst_rect
top left corner then the unsigned cursor pos wraps around to a large
positive number since cursor pos is a u32.
There was an attempt to guard against this in hubp1_cursor_set_position
by checking the src_x_offset and src_y_offset and offseting the
cursor hotspot within hubp1_cursor_set_position.
However, the cursor position itself is still being programmed
incorrectly as a large value.
This manifests itself visually as the cursor disappearing or containing
strange artifacts near the middle of the screen on raven.
[How]
Don't subtract the destination rect top left corner from the pos but
add it to the hotspot instead. This happens before the pos gets
passed into hubp1_cursor_set_position.
This achieves the same result but avoids the subtraction wrap around.
With this fix the original cursor programming logic can be used again.
v2: add hunk that got dropped accidently when this patch was originally
committed. (Alex)
Fixes: 0921c41e1902831 ("drm/amd/display: Fix negative cursor pos programming")
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Leo Li <[email protected]>
Acked-by: Murton Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Commit 6dc4f100c175 ("block: allow bio_for_each_segment_all() to
iterate over multi-page bvec") changes bio_for_each_segment_all()
to use for-inside-for.
This way breaks all bio_for_each_segment_all() call with error out
branch via 'break', since now 'break' can only break from the inner
loop.
Fixes this issue by implementing bio_for_each_segment_all() via
single 'for' loop, and now the logic is very similar with normal
bvec iterator.
Cc: Qu Wenruo <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Omar Sandoval <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reported-and-Tested-by: Qu Wenruo <[email protected]>
Fixes: 6dc4f100c175 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec")
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Jason doesn't really have the time to review blk/scsi
patches. Paolo and Setfan agreed to help out.
Thanks guys!
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
If the msix_affinity_masks is alloced failed, then we'll
try to free some resources in vp_free_vectors() that may
access it directly.
We met the following stack in our production:
[ 29.296767] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 29.311151] IP: [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci]
[ 29.324787] PGD 0
[ 29.333224] Oops: 0000 [#1] SMP
[...]
[ 29.425175] RIP: 0010:[<ffffffffc04fe35a>] [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci]
[ 29.441405] RSP: 0018:ffff9a55c2dcfa10 EFLAGS: 00010206
[ 29.453491] RAX: 0000000000000000 RBX: ffff9a55c322c400 RCX: 0000000000000000
[ 29.467488] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9a55c322c400
[ 29.481461] RBP: ffff9a55c2dcfa20 R08: 0000000000000000 R09: ffffc1b6806ff020
[ 29.495427] R10: 0000000000000e95 R11: 0000000000aaaaaa R12: 0000000000000000
[ 29.509414] R13: 0000000000010000 R14: ffff9a55bd2d9e98 R15: ffff9a55c322c400
[ 29.523407] FS: 00007fdcba69f8c0(0000) GS:ffff9a55c2840000(0000) knlGS:0000000000000000
[ 29.538472] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.551621] CR2: 0000000000000000 CR3: 000000003ce52000 CR4: 00000000003607a0
[ 29.565886] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 29.580055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 29.594122] Call Trace:
[ 29.603446] [<ffffffffc04fe8a2>] vp_request_msix_vectors+0xe2/0x260 [virtio_pci]
[ 29.618017] [<ffffffffc04fedc5>] vp_try_to_find_vqs+0x95/0x3b0 [virtio_pci]
[ 29.632152] [<ffffffffc04ff117>] vp_find_vqs+0x37/0xb0 [virtio_pci]
[ 29.645582] [<ffffffffc057bf63>] init_vq+0x153/0x260 [virtio_blk]
[ 29.658831] [<ffffffffc057c1e8>] virtblk_probe+0xe8/0x87f [virtio_blk]
[...]
Cc: Gonglei <[email protected]>
Signed-off-by: Longpeng <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Gonglei <[email protected]>
|
|
This interface allows the host driver to offload OWE processing
to user space. This intends to support OWE (Opportunistic Wireless
Encryption) AKM by the drivers that implement SME but rely on the
user space for the cryptographic/OWE processing in AP mode. Such
drivers are not capable of processing/deriving the DH IE.
A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced
to send the request/event between the host driver and user space.
Driver shall provide the OWE info (MAC address and DH IE) of
the peer to user space for cryptographic processing of the DH IE
through the event. Accordingly, the user space shall update the
OWE info/DH IE to the driver.
Following is the sequence in AP mode for OWE authentication.
Driver passes the OWE info obtained from the peer in the
Association Request to the user space through the event
cfg80211_update_owe_info_event. User space shall process the
OWE info received and generate new OWE info. This OWE info is
passed to the driver through NL80211_CMD_UPDATE_OWE_INFO
request. Driver eventually uses this OWE info to send the
Association Response to the peer.
This OWE info in the command interface carries the IEs that include
PMKID of the peer if the PMKSA is still valid or an updated DH IE
for generating a new PMKSA with the peer.
Signed-off-by: Liangwei Dong <[email protected]>
Signed-off-by: Sunil Dutt <[email protected]>
Signed-off-by: Srinivas Dasari <[email protected]>
[remove policy initialization - no longer exists]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Recently we set CONFIG_SND_HDA_POWER_SAVE_DEFAULT to 1 when
configuring the kernel, then two machines were reported to have noise
after installing the new kernel. Put them in the blacklist, the
noise disappears.
https://bugs.launchpad.net/bugs/1821663
Cc: <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add support for mesh airtime link metric attribute
NL80211_STA_INFO_AIRTIME_LINK_METRIC.
Signed-off-by: Narayanraddi Masti <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Commit 48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C")
broke the radix-mode segment exception handler. In radix mode, this is
exception is not an SLB miss, rather it signals that the EA is outside
the range translated by any page table.
The commit lost the radix feature alternate code patch, which can
cause faults to some EAs to kernel BUG at arch/powerpc/mm/slb.c:639!
The original radix code would send faults to slb_miss_large_addr,
which would end up faulting due to slb_addr_limit being 0. This patch
sends radix directly to do_bad_slb_fault, which is a bit clearer.
Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C")
Cc: [email protected] # v4.20+
Reported-by: Anton Blanchard <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
This commit adds the support to specify the RSSI thresholds per
band for each match set. This enhances the current behavior which
specifies a single rssi_threshold across all the bands by
introducing the rssi_threshold_per_band. These per band rssi
thresholds are referred through NL80211_BAND_* (enum nl80211_band)
variables as attribute types. Such attributes/values per each
band are nested through NL80211_ATTR_SCHED_SCAN_MIN_RSSI.
These band specific rssi thresholds shall take precedence over
the current rssi_thold per match set.
Drivers indicate this support through
%NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD.
These per band rssi attributes/values does not specify
"default RSSI filter" as done by
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to stay backward compatible.
That said, these per band rssi values have to be specified for
the corresponding matchset.
Signed-off-by: vamsi krishna <[email protected]>
Signed-off-by: Srinivas Dasari <[email protected]>
[rebase on refactoring, add policy]
Signed-off-by: Johannes Berg <[email protected]>
|
|
The sched scan code here is really deep - avoid one level
of indentation by short-circuiting the loop instead of
putting everything into the if block.
Signed-off-by: Johannes Berg <[email protected]>
|
|
Currently there is no way for the driver to signal to mac80211 that it should
schedule a TXQ even if there are no packets on the mac80211 part of that queue.
This is problematic if the driver has an internal retry queue to deal with
software A-MPDU retry.
This patch changes the behavior of ieee80211_schedule_txq to always schedule
the queue, as its only user (ath9k) seems to expect such behavior already:
it calls this function on tx status and on powersave wakeup whenever its
internal retry queue is not empty.
Also add an extra argument to ieee80211_return_txq to get the same behavior.
This fixes an issue on ath9k where tx queues with packets to retry (and no
new packets in mac80211) would not get serviced.
Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs")
Signed-off-by: Felix Fietkau <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
If we just set this to 2048, and have multiple limits you
can select from, the total number might run over and cause
a warning in cfg80211. This doesn't make sense, so we just
calculate the total max_interfaces now.
Reported-by: [email protected]
Fixes: 99e3a44bac37 ("mac80211_hwsim: allow setting iftype support")
Signed-off-by: Johannes Berg <[email protected]>
|
|
wiphy_{err,warn}_ratelimited will be used by rt2x00
Signed-off-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
sun8i_tcon_top_un/bind
There are two problems here:
1. Not all clk_data->hws[] need to be initialized, depending on various
configured quirks. This leads to NULL ptr deref in
clk_hw_unregister_gate() in sun8i_tcon_top_unbind()
2. If there is error when registering the clk_data->hws[],
err_unregister_gates error path will try to unregister
IS_ERR()=true (invalid) pointer.
For problem (1) I have this stack trace:
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
clk_hw_unregister+0x8/0x18
clk_hw_unregister_gate+0x14/0x28
sun8i_tcon_top_unbind+0x2c/0x60
component_unbind.isra.4+0x2c/0x50
component_bind_all+0x1d4/0x230
sun4i_drv_bind+0xc4/0x1a0
try_to_bring_up_master+0x164/0x1c0
__component_add+0xa0/0x168
component_add+0x10/0x18
sun8i_dw_hdmi_probe+0x18/0x20
platform_drv_probe+0x3c/0x70
really_probe+0xcc/0x278
driver_probe_device+0x34/0xa8
Problem (2) was identified by head scratching.
Signed-off-by: Ondrej Jirman <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We haven't backmerged for a while and this creates some coherency issues
across DRM drivers.
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Setting the module_get_upon_open field for component driver
prevents the module refcount from being incremented during
component probe(). This could lead to the module being
allowed to be unloaded when a pcm stream is open. So,
if this field is set, the module's refcount should be
incremented during pcm open to prevent module removal
when the component is in use. And, the refcount should
be decremented upon pcm close.
Signed-off-by: Ranjani Sridharan <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Recently, for Intel platforms the "ignore_module_refcount" field
was introduced for the component driver. In order to avoid a
deadlock preventing the PCI modules from being removed
even when the card was idle, the refcounts were not incremented
for the device driver module during component probe.
However, this change introduced a nasty side effect:
the device driver module can be unloaded while a pcm stream is open.
This patch proposes to change the field to be renamed as
"module_get_upon_open". When this field is set, the module
refcount should be incremented on pcm open amd decremented
upon pcm close. This will enable modules to be removed
when no PCM playback/capture happens and prevent removal
when the component is actually in use.
Also, align with the skylake component driver with the new name.
Fixes: b450b878('ASoC: core: don't increase component module refcount
unconditionally'
Signed-off-by: Ranjani Sridharan <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
This structure is now only 4 bytes, so its more efficient
to cache a copy rather than its address.
No significant size difference in allmodconfig vmlinux.
With non-modular kernel that has all XFRM options enabled, this
series reduces vmlinux image size by ~11kb. All xfrm_mode
indirections are gone and all modes are built-in.
before (ipsec-next master):
text data bss dec filename
21071494 7233140 11104324 39408958 vmlinux.master
after this series:
21066448 7226772 11104324 39397544 vmlinux.patched
With allmodconfig kernel, the size increase is only 362 bytes,
even all the xfrm config options removed in this series are
modular.
before:
text data bss dec filename
15731286 6936912 4046908 26715106 vmlinux.master
after this series:
15731492 6937068 4046908 26715468 vmlinux
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
after previous changes, xfrm_mode contains no function pointers anymore
and all modules defining such struct contain no code except an init/exit
functions to register the xfrm_mode struct with the xfrm core.
Just place the xfrm modes core and remove the modules,
the run-time xfrm_mode register/unregister functionality is removed.
Before:
text data bss dec filename
7523 200 2364 10087 net/xfrm/xfrm_input.o
40003 628 440 41071 net/xfrm/xfrm_state.o
15730338 6937080 4046908 26714326 vmlinux
7389 200 2364 9953 net/xfrm/xfrm_input.o
40574 656 440 41670 net/xfrm/xfrm_state.o
15730084 6937068 4046908 26714060 vmlinux
The xfrm*_mode_{transport,tunnel,beet} modules are gone.
v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6
ones rather than removing them.
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from
ipv6 in case of CONFIG_IPV6=m.
This change has virtually no effect on vmlinux size, but it reduces
afinfo size and allows followup patch to make xfrm modes const.
v2: mark if (afinfo) tests as likely (Sabrina)
re-fetch afinfo according to inner_mode in xfrm_prepare_input().
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
similar to previous patch: no external module dependencies,
so we can avoid the indirection by placing this in the core.
This change removes the last indirection from xfrm_mode and the
xfrm4|6_mode_{beet,tunnel}.c modules contain (almost) no code anymore.
Before:
text data bss dec hex filename
3957 136 0 4093 ffd net/xfrm/xfrm_output.o
587 44 0 631 277 net/ipv4/xfrm4_mode_beet.o
649 32 0 681 2a9 net/ipv4/xfrm4_mode_tunnel.o
625 44 0 669 29d net/ipv6/xfrm6_mode_beet.o
599 32 0 631 277 net/ipv6/xfrm6_mode_tunnel.o
After:
text data bss dec hex filename
5359 184 0 5543 15a7 net/xfrm/xfrm_output.o
171 24 0 195 c3 net/ipv4/xfrm4_mode_beet.o
171 24 0 195 c3 net/ipv4/xfrm4_mode_tunnel.o
172 24 0 196 c4 net/ipv6/xfrm6_mode_beet.o
172 24 0 196 c4 net/ipv6/xfrm6_mode_tunnel.o
v2: fold the *encap_add functions into xfrm*_prepare_output
preserve (move) output2 comment (Sabrina)
use x->outer_mode->encap, not inner
fix a build breakage on ppc (kbuild robot)
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
No external dependencies on any module, place this in the core.
Increase is about 1800 byte for xfrm_input.o.
The beet helpers get added to internal header, as they can be reused
from xfrm_output.c in the next patch (kernel contains several
copies of them in the xfrm{4,6}_mode_beet.c files).
Before:
text data bss dec filename
5578 176 2364 8118 net/xfrm/xfrm_input.o
1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o
171 40 0 211 net/ipv4/xfrm4_mode_transport.o
1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o
1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o
172 40 0 212 net/ipv6/xfrm6_mode_ro.o
172 40 0 212 net/ipv6/xfrm6_mode_transport.o
1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o
After:
text data bss dec filename
7373 200 2364 9937 net/xfrm/xfrm_input.o
587 44 0 631 net/ipv4/xfrm4_mode_beet.o
171 32 0 203 net/ipv4/xfrm4_mode_transport.o
649 32 0 681 net/ipv4/xfrm4_mode_tunnel.o
625 44 0 669 net/ipv6/xfrm6_mode_beet.o
172 32 0 204 net/ipv6/xfrm6_mode_ro.o
172 32 0 204 net/ipv6/xfrm6_mode_transport.o
599 32 0 631 net/ipv6/xfrm6_mode_tunnel.o
v2: pass inner_mode to xfrm_inner_mode_encap_remove to fix
AF_UNSPEC selector breakage (bisected by Benedict Wong)
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
These functions are small and we only have versions for tunnel
and transport mode for ipv4 and ipv6 respectively.
Just place the 'transport or tunnel' conditional in the protocol
specific function instead of using an indirection.
Before:
3226 12 0 3238 net/ipv4/esp4_offload.o
7004 492 0 7496 net/ipv4/ip_vti.o
3339 12 0 3351 net/ipv6/esp6_offload.o
11294 460 0 11754 net/ipv6/ip6_vti.o
1180 72 0 1252 net/ipv4/xfrm4_mode_beet.o
428 48 0 476 net/ipv4/xfrm4_mode_transport.o
1271 48 0 1319 net/ipv4/xfrm4_mode_tunnel.o
1083 60 0 1143 net/ipv6/xfrm6_mode_beet.o
172 48 0 220 net/ipv6/xfrm6_mode_ro.o
429 48 0 477 net/ipv6/xfrm6_mode_transport.o
1164 48 0 1212 net/ipv6/xfrm6_mode_tunnel.o
15730428 6937008 4046908 26714344 vmlinux
After:
3461 12 0 3473 net/ipv4/esp4_offload.o
7000 492 0 7492 net/ipv4/ip_vti.o
3574 12 0 3586 net/ipv6/esp6_offload.o
11295 460 0 11755 net/ipv6/ip6_vti.o
1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o
171 40 0 211 net/ipv4/xfrm4_mode_transport.o
1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o
1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o
172 40 0 212 net/ipv6/xfrm6_mode_ro.o
172 40 0 212 net/ipv6/xfrm6_mode_transport.o
1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o
15730424 6937008 4046908 26714340 vmlinux
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
There are only two versions (tunnel and transport). The ip/ipv6 versions
are only differ in sizeof(iphdr) vs ipv6hdr.
Place this in the core and use x->outer_mode->encap type to call the
correct adjustment helper.
Before:
text data bss dec filename
15730311 6937008 4046908 26714227 vmlinux
After:
15730428 6937008 4046908 26714344 vmlinux
(about 117 byte increase)
v2: use family from x->outer_mode, not inner
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Same is input indirection. Only exception: we need to export
xfrm_outer_mode_output for pktgen.
Increases size of vmlinux by about 163 byte:
Before:
text data bss dec filename
15730208 6936948 4046908 26714064 vmlinux
After:
15730311 6937008 4046908 26714227 vmlinux
xfrm_inner_extract_output has no more external callers, make it static.
v2: add IS_ENABLED(IPV6) guard in xfrm6_prepare_output
add two missing breaks in xfrm_outer_mode_output (Sabrina Dubroca)
add WARN_ON_ONCE for 'call AF_INET6 related output function, but
CONFIG_IPV6=n' case.
make xfrm_inner_extract_output static
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
No need for any indirection or abstraction here, both functions
are pretty much the same and quite small, they also have no external
dependencies.
xfrm_prepare_input can then be made static.
With allmodconfig build, size increase of vmlinux is 25 byte:
Before:
text data bss dec filename
15730207 6936924 4046908 26714039 vmlinux
After:
15730208 6936948 4046908 26714064 vmlinux
v2: Fix INET_XFRM_MODE_TRANSPORT name in is-enabled test (Sabrina Dubroca)
change copied comment to refer to transport and network header,
not skb->{h,nh}, which don't exist anymore. (Sabrina)
make xfrm_prepare_input static (Eyal Birger)
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Now that we have the family available directly in the
xfrm_mode struct, we can use that and avoid one extra dereference.
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
This will be useful to know if we're supposed to decode ipv4 or ipv6.
While at it, make the unregister function return void, all module_exit
functions did just BUG(); there is never a point in doing error checks
if there is no way to handle such error.
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
The x86_64 implementation of Poly1305 produces the wrong result on some
inputs because poly1305_4block_avx2() incorrectly assumes that when
partially reducing the accumulator, the bits carried from limb 'd4' to
limb 'h0' fit in a 32-bit integer. This is true for poly1305-generic
which processes only one block at a time. However, it's not true for
the AVX2 implementation, which processes 4 blocks at a time and
therefore can produce intermediate limbs about 4x larger.
Fix it by making the relevant calculations use 64-bit arithmetic rather
than 32-bit. Note that most of the carries already used 64-bit
arithmetic, but the d4 -> h0 carry was different for some reason.
To be safe I also made the same change to the corresponding SSE2 code,
though that only operates on 1 or 2 blocks at a time. I don't think
it's really needed for poly1305_block_sse2(), but it doesn't hurt
because it's already x86_64 code. It *might* be needed for
poly1305_2block_sse2(), but overflows aren't easy to reproduce there.
This bug was originally detected by my patches that improve testmgr to
fuzz algorithms against their generic implementation. But also add a
test vector which reproduces it directly (in the AVX2 case).
Fixes: b1ccc8f4b631 ("crypto: poly1305 - Add a four block AVX2 variant for x86_64")
Fixes: c70f4abef07a ("crypto: poly1305 - Add a SSE2 SIMD variant for x86_64")
Cc: <[email protected]> # v4.3+
Cc: Martin Willi <[email protected]>
Cc: Jason A. Donenfeld <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Martin Willi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
This patch fixes the sai driver structure overwriting which results in
a cpu dai name equal NULL.
Fixes: 3e086ed ("ASoC: stm32: add SAI driver")
Signed-off-by: Arnaud Pouliquen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
The control values and texts of the enum kcontrol associated
with a widget need to be freed when the widget is removed.
However, both struct snd_soc_dapm_widget and struct soc_enum
contain a dobj member, which resulted in a confusion.
The existing code generates a null pointer dereference by
attempting to free the values and texts from the dobj which
belongs to the widget instead of the dobj belonging to the
enum kcontrol.
The suggested fix is to use the correct dobj member (se->dobj)
of the enum kcontrol.
Signed-off-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
If we unplug a udl device, the usb callback with deinit the
mode_config struct, however userspace will still have an open
file descriptor and a framebuffer on that device. When userspace
closes the fd, we'll oops because it'll try and look stuff up
in the object idr which we've destroyed.
This punts destroying the mode objects until release time instead.
Cc: [email protected]
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a bug in the implementation of xcbc and cmac in caam"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix copy of next buffer for xcbc and cmac
|
|
When the mtu of a vrf device is set to 0, it would cause ping
failed. So I think we should limit vrf mtu in a reasonable range
to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it
will works for both ipv4 and ipv6. And if dev->max_mtu still be 0
can be confusing, so I set dev->max_mtu to ETH_MAX_MTU.
Here is the reproduce step:
1.Config vrf interface and set mtu to 0:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff
2.Ping peer:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP group default qlen 1000
link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.1/16 scope global enp4s0
valid_lft forever preferred_lft forever
connect: Network is unreachable
3.Set mtu to default value, ping works:
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms
Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device")
Signed-off-by: Miaohe Lin <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The commit 510ded33e075 ("slab: implement slab_root_caches list")
changes the name of the list node within "struct kmem_cache" from "list"
to "root_caches_node", but leaks_show() still use the "list" which
causes a crash when reading /proc/slab_allocators.
You need to have CONFIG_SLAB=y and CONFIG_MEMCG=y to see the problem,
because without MEMCG all slab caches are root caches, and the "list"
node happens to be the right one.
Fixes: 510ded33e075 ("slab: implement slab_root_caches list")
Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Tobin C. Harding <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
ppgtt_free_all_spt() iterates the radixtree as it is deleting it,
forgoing all protection against the leaves being freed in the process
(leaving the iter pointing into the void).
A minimal fix seems to be to use the available post_shadow_list to
decompose the tree into a list prior to destroying the radixtree.
Alerted by the sparse warnings:
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void [noderef] <asn:4> **
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void [noderef] <asn:4> **
drivers/gpu/drm/i915/gvt/gtt.c:758:45: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:758:45: expected void [noderef] <asn:4> **slot
drivers/gpu/drm/i915/gvt/gtt.c:758:45: got void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void [noderef] <asn:4> **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void [noderef] <asn:4> **
This would also have been loudly warning if run through CI for the
invalid RCU dereferences.
Fixes: b6c126a39345 ("drm/i915/gvt: Manage shadow pages with radix tree")
Reviewed-by: Zhenyu Wang <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: Zhi Wang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
Fix the sparse warning for blithely using iomem with normal memcpy:
drivers/gpu/drm/i915/gvt/kvmgt.c:916:21: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/kvmgt.c:916:21: expected void *aperture_va
drivers/gpu/drm/i915/gvt/kvmgt.c:916:21: got void [noderef] <asn:2> *
drivers/gpu/drm/i915/gvt/kvmgt.c:927:26: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/gvt/kvmgt.c:927:26: expected void [noderef] <asn:2> *vaddr
drivers/gpu/drm/i915/gvt/kvmgt.c:927:26: got void *aperture_va
Fixes: d480b28a41a6 ("drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on")
Reviewed-by: Zhenyu Wang <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Zhi Wang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
John reports:
Recent refactoring of fl_change aims to use the classifier spinlock to
avoid the need for rtnl lock. In doing so, the fl_hw_replace_filer()
function was moved to before the lock is taken. This can create problems
for drivers if duplicate filters are created (commmon in ovs tc offload
due to filters being triggered by user-space matches).
Drivers registered for such filters will now receive multiple copies of
the same rule, each with a different cookie value. This means that the
drivers would need to do a full match field lookup to determine
duplicates, repeating work that will happen in flower __fl_lookup().
Currently, drivers do not expect to receive duplicate filters.
To fix this, verify that filter with same key is not present in flower
classifier hash table and insert the new filter to the flower hash table
before offloading it to hardware. Implement helper function
fl_ht_insert_unique() to atomically verify/insert a filter.
This change makes filter visible to fast path at the beginning of
fl_change() function, which means it can no longer be freed directly in
case of error. Refactor fl_change() error handling code to deallocate the
filter with rcu timeout.
Fixes: 620da4860827 ("net: sched: flower: refactor fl_change")
Reported-by: John Hurley <[email protected]>
Signed-off-by: Vlad Buslov <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This is a follow up of the commit 0db6f8befc32 ("net/sched: fix ->get
helper of the matchall cls").
To test it:
$ cd tools/testing/selftests/tc-testing
$ ln -s ../plugin-lib/nsPlugin.py plugins/20-nsPlugin.py
$ ./tdc.py -n -e 2638
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
NeilBrown says:
====================
Convert rhashtable to use bitlocks
This series converts rhashtable to use a per-bucket bitlock
rather than a separate array of spinlocks.
This:
reduces memory usage
results in slightly fewer memory accesses
slightly improves parallelism
makes a configuration option unnecessary
The main change from previous version is to use a distinct type for
the pointer in the bucket which has a bit-lock in it. This
helped find two places where rht_ptr() was missed, one
in rhashtable_free_and_destroy() in print_ht in the test code.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Native bit_spin_locks are not tracked by lockdep.
The bit_spin_locks used for rhashtable buckets are local
to the rhashtable implementation, so there is little opportunity
for the sort of misuse that lockdep might detect.
However locks are held while a hash function or compare
function is called, and if one of these took a lock,
a misbehaviour is possible.
As it is quite easy to add lockdep support this unlikely
possibility seems to be enough justification.
So create a lockdep class for bucket bit_spin_lock and attach
through a lockdep_map in each bucket_table.
Without the 'nested' annotation in rhashtable_rehash_one(), lockdep
correctly reports a possible problem as this lock is taken
while another bucket lock (in another table) is held. This
confirms that the added support works.
With the correct nested annotation in place, lockdep reports
no problems.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch changes rhashtables to use a bit_spin_lock on BIT(1) of the
bucket pointer to lock the hash chain for that bucket.
The benefits of a bit spin_lock are:
- no need to allocate a separate array of locks.
- no need to have a configuration option to guide the
choice of the size of this array
- locking cost is often a single test-and-set in a cache line
that will have to be loaded anyway. When inserting at, or removing
from, the head of the chain, the unlock is free - writing the new
address in the bucket head implicitly clears the lock bit.
For __rhashtable_insert_fast() we ensure this always happens
when adding a new key.
- even when lockings costs 2 updates (lock and unlock), they are
in a cacheline that needs to be read anyway.
The cost of using a bit spin_lock is a little bit of code complexity,
which I think is quite manageable.
Bit spin_locks are sometimes inappropriate because they are not fair -
if multiple CPUs repeatedly contend of the same lock, one CPU can
easily be starved. This is not a credible situation with rhashtable.
Multiple CPUs may want to repeatedly add or remove objects, but they
will typically do so at different buckets, so they will attempt to
acquire different locks.
As we have more bit-locks than we previously had spinlocks (by at
least a factor of two) we can expect slightly less contention to
go with the slightly better cache behavior and reduced memory
consumption.
To enhance type checking, a new struct is introduced to represent the
pointer plus lock-bit
that is stored in the bucket-table. This is "struct rhash_lock_head"
and is empty. A pointer to this needs to be cast to either an
unsigned lock, or a "struct rhash_head *" to be useful.
Variables of this type are most often called "bkt".
Previously "pprev" would sometimes point to a bucket, and sometimes a
->next pointer in an rhash_head. As these are now different types,
pprev is NULL when it would have pointed to the bucket. In that case,
'blk' is used, together with correct locking protocol.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Rather than returning a pointer to a static nulls, rht_bucket_var()
now returns NULL if the bucket doesn't exist.
This will make the next patch, which stores a bitlock in the
bucket pointer, somewhat cleaner.
This change involves introducing __rht_bucket_nested() which is
like rht_bucket_nested(), but doesn't provide the static nulls,
and changing rht_bucket_nested() to call this and possible
provide a static nulls - as is still needed for the non-var case.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
nested_table_alloc() relies on the fact that there is
at most one spinlock allocated for every slot in the top
level nested table, so it is not possible for two threads
to try to allocate the same table at the same time.
This assumption is a little fragile (it is not explicit) and is
unnecessary as cmpxchg() can be used instead.
A future patch will replace the spinlocks by per-bucket bitlocks,
and then we won't be able to protect the slot pointer with a spinlock.
So replace rcu_assign_pointer() with cmpxchg() - which has equivalent
barrier properties.
If it the cmp fails, free the table that was just allocated.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|