aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-09-07tracefs/eventfs: Use dput to free the toplevel events directorySteven Rostedt (Google)3-8/+16
Currently when rmdir on an instance is done, eventfs_remove_events_dir() is called and it does a dput on the dentry and then frees the eventfs_inode that represents the events directory. But there's no protection against a reader reading the top level events directory at the same time and we can get a use after free error. Instead, use the dput() associated to the dentry to also free the eventfs_inode associated to the events directory, as that will get called when the last reference to the directory is released. This issue triggered the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in eventfs_root_lookup+0x88/0x1b0 Read of size 8 at addr ffff888120130ca0 by task ftracetest/1201 CPU: 4 PID: 1201 Comm: ftracetest Not tainted 6.5.0-test-10737-g469e0a8194e7 #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x90 print_report+0xcf/0x670 ? __pfx_ring_buffer_record_off+0x10/0x10 ? _raw_spin_lock_irqsave+0x2b/0x70 ? __virt_addr_valid+0xd9/0x160 kasan_report+0xd4/0x110 ? eventfs_root_lookup+0x88/0x1b0 ? eventfs_root_lookup+0x88/0x1b0 eventfs_root_lookup+0x88/0x1b0 ? eventfs_root_lookup+0x33/0x1b0 __lookup_slow+0x194/0x2a0 ? __pfx___lookup_slow+0x10/0x10 ? down_read+0x11c/0x330 walk_component+0x166/0x220 link_path_walk.part.0.constprop.0+0x3a3/0x5a0 ? seqcount_lockdep_reader_access+0x82/0x90 ? __pfx_link_path_walk.part.0.constprop.0+0x10/0x10 path_openat+0x143/0x11f0 ? __lock_acquire+0xa1a/0x3220 ? __pfx_path_openat+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 do_filp_open+0x166/0x290 ? __pfx_do_filp_open+0x10/0x10 ? lock_is_held_type+0xce/0x120 ? preempt_count_sub+0xb7/0x100 ? _raw_spin_unlock+0x29/0x50 ? alloc_fd+0x1a0/0x320 do_sys_openat2+0x126/0x160 ? rcu_is_watching+0x34/0x60 ? __pfx_do_sys_openat2+0x10/0x10 ? __might_resched+0x2cf/0x3b0 ? __fget_light+0xdf/0x100 __x64_sys_openat+0xcd/0x140 ? __pfx___x64_sys_openat+0x10/0x10 ? syscall_enter_from_user_mode+0x22/0x90 ? lockdep_hardirqs_on+0x7d/0x100 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f1dceef5e51 Code: 75 57 89 f0 25 00 00 41 00 3d 00 00 41 00 74 49 80 3d 9a 27 0e 00 00 74 6d 89 da 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 93 00 00 00 48 8b 54 24 28 64 48 2b 14 25 RSP: 002b:00007fff2cddf380 EFLAGS: 00000202 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000000000000241 RCX: 00007f1dceef5e51 RDX: 0000000000000241 RSI: 000055d7520677d0 RDI: 00000000ffffff9c RBP: 000055d7520677d0 R08: 000000000000001e R09: 0000000000000001 R10: 00000000000001b6 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000003 R14: 000055d752035678 R15: 000055d752067788 </TASK> Allocated by task 1200: kasan_save_stack+0x2f/0x50 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8b/0x90 eventfs_create_events_dir+0x54/0x220 create_event_toplevel_files+0x42/0x130 event_trace_add_tracer+0x33/0x180 trace_array_create_dir+0x52/0xf0 trace_array_create+0x361/0x410 instance_mkdir+0x6b/0xb0 tracefs_syscall_mkdir+0x57/0x80 vfs_mkdir+0x275/0x380 do_mkdirat+0x1da/0x210 __x64_sys_mkdir+0x74/0xa0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 1251: kasan_save_stack+0x2f/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 __kasan_slab_free+0x106/0x180 __kmem_cache_free+0x149/0x2e0 event_trace_del_tracer+0xcb/0x120 __remove_instance+0x16a/0x340 instance_rmdir+0x77/0xa0 tracefs_syscall_rmdir+0x77/0xc0 vfs_rmdir+0xed/0x2d0 do_rmdir+0x235/0x280 __x64_sys_rmdir+0x5f/0x90 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 The buggy address belongs to the object at ffff888120130ca0 which belongs to the cache kmalloc-16 of size 16 The buggy address is located 0 bytes inside of freed 16-byte region [ffff888120130ca0, ffff888120130cb0) The buggy address belongs to the physical page: page:000000004dbddbb0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x120130 flags: 0x17ffffc0000800(slab|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000800 ffff8881000423c0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000800080 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888120130b80: 00 00 fc fc 00 05 fc fc 00 00 fc fc 00 02 fc fc ffff888120130c00: 00 07 fc fc 00 00 fc fc 00 00 fc fc fa fb fc fc >ffff888120130c80: 00 00 fc fc fa fb fc fc 00 00 fc fc 00 00 fc fc ^ ffff888120130d00: 00 00 fc fc 00 00 fc fc 00 00 fc fc fa fb fc fc ffff888120130d80: 00 00 fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc ================================================================== Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Cc: Ajay Kaher <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Andrew Morton <[email protected]> Fixes: 5bdcd5f5331a2 eventfs: ("Implement removal of meta data from eventfs") Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Naresh Kamboju <[email protected]> Reported-by: Zheng Yejian <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-09-07net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()Vladimir Oltean1-1/+1
enetc_psi_create() returns an ERR_PTR() or a valid station interface pointer, but checking for the non-NULL quality of the return code blurs that difference away. So if enetc_psi_create() fails, we call enetc_psi_destroy() when we shouldn't. This will likely result in crashes, since enetc_psi_create() cleans up everything after itself when it returns an ERR_PTR(). Fixes: f0168042a212 ("net: enetc: reimplement RFS/RSS memory clearing as PCI quirk") Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Suggested-by: Dan Carpenter <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-09-07Revert "net: team: do not use dynamic lockdep key"Jakub Kicinski3-85/+60
This reverts commit 39285e124edbc752331e98ace37cc141a6a3747a. Looks like the change has unintended consequences in exposing objects before they are initialized. Let's drop this patch and try again in net-next. Reported-by: [email protected] Fixes: 39285e124edb ("net: team: do not use dynamic lockdep key") Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-09-07Merge tag 's390-6.6-2' of ↵Linus Torvalds21-223/+98
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - A couple of virtual vs physical address confusion fixes - Rework locking in dcssblk driver to address a lockdep warning - Remove support for "noexec" kernel command line option since there is no use case where it would make sense - Simplify kernel mapping setup and get rid of quite a bit of code - Add architecture specific __set_memory_yy() functions which allow us to modify kernel mappings. Unlike the set_memory_xx() variants they take void pointer start and end parameters, which allows using them without the usual casts, and also to use them on areas larger than 8TB. Note that the set_memory_xx() family comes with an int num_pages parameter which overflows with 8TB. This could be addressed by changing the num_pages parameter to unsigned long, however requires to change all architectures, since the module code expects an int parameter (see module_set_memory()). This was indeed an issue since for debug_pagealloc() we call set_memory_4k() on the whole identity mapping. Therefore address this for now with the __set_memory_yy() variant, and address common code later - Use dev_set_name() and also fix memory leak in zcrypt driver error handling - Remove unused lsi_mask from airq_struct - Add warning for invalid kernel mapping requests * tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vmem: do not silently ignore mapping limit s390/zcrypt: utilize dev_set_name() ability to use a formatted string s390/zcrypt: don't leak memory if dev_set_name() fails s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion s390/airq: remove lsi_mask from airq_struct s390/mm: use __set_memory() variants where useful s390/set_memory: add __set_memory() variant s390/set_memory: generate all set_memory() functions s390/mm: improve description of mapping permissions of prefix pages s390/amode31: change type of __samode31, __eamode31, etc s390/mm: simplify kernel mapping setup s390: remove "noexec" option s390/vmem: fix virtual vs physical address confusion s390/dcssblk: fix lockdep warning s390/monreader: fix virtual vs physical address confusion
2023-09-07Merge tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds44-252/+149
Pull MIPS updates from Thomas Bogendoerfer: "Just cleanups and fixes" * tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: TXx9: Do PCI error checks on own line arch/mips/configs/*_defconfig cleanup MIPS: VDSO: Conditionally export __vdso_gettimeofday() Mips: loongson3_defconfig: Enable ast drm driver by default mips: remove <asm/export.h> mips: replace #include <asm/export.h> with #include <linux/export.h> mips: remove unneeded #include <asm/export.h> MIPS: Loongson64: Fix more __iomem attributes MIPS: loongson32: Remove regs-rtc.h MIPS: loongson32: Remove regs-clk.h MIPS: More explicit DT include clean-ups MIPS: Fixup explicit DT include clean-up Revert MIPS: Loongson: Fix build error when make modules_install MIPS: Only fiddle with CHECKFLAGS if `need-compiler' MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression MIPS: Explicitly include correct DT includes
2023-09-07Merge tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds7-5/+56
Pull xtensa updates from Max Filippov: - enable MTD XIP support - fix base address of the xtensa perf module in newer hardware * tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: add XIP-aware MTD support xtensa: PMU: fix base address for the newer hardware
2023-09-07ntfs3: drop inode references in ntfs_put_super()Christian Brauner1-6/+12
Recently we moved most cleanup from ntfs_put_super() into ntfs3_kill_sb() as part of a bigger cleanup. This accidently also moved dropping inode references stashed in ntfs3's sb->s_fs_info from @sb->put_super() to @sb->kill_sb(). But generic_shutdown_super() verifies that there are no busy inodes past sb->put_super(). Fix this and disentangle dropping inode references from freeing @sb->s_fs_info. Fixes: a4f64a300a29 ("ntfs3: free the sbi in ->kill_sb") # mainline only Reported-by: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2023-09-07vfs: mostly undo glibc turning 'fstat()' into 'fstatat(AT_EMPTY_PATH)'Linus Torvalds1-0/+17
Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and that seems to have been going on for quite a long time due to glibc having tried to simplify its stat logic into just one point. This turns out to cause completely unnecessary overhead, where we then go off and allocate the kernel side pathname, and actually look up the empty path. Sure, our path lookup is quite optimized, but it still causes a fair bit of allocation overhead and a couple of completely unnecessary rounds of lockref accesses etc. This is all hopefully getting fixed in user space, and there is a patch floating around for just having glibc use the native fstat() system call. But even with the current situation we can at least improve on things by catching the situation and short-circuiting it. Note that this is still measurably slower than just a plain 'fstat()', since just checking that the filename is actually empty is somewhat expensive due to inevitable user space access overhead from the kernel (ie verifying pointers, and SMAP on x86). But it's still quite a bit faster than actually looking up the path for real. To quote numers from Mateusz: "Sapphire Rapids, will-it-scale, ops/s stock fstat 5088199 patched fstat 7625244 (+49%) real fstat 8540383 (+67% / +12%)" where that 'stock fstat' is the glibc translation of fstat into fstatat() with an empty path, the 'patched fstat' is with this short circuiting of the path lookup, and the 'real fstat' is the actual native fstat() system call with none of this overhead. Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/ Reported-by: Mateusz Guzik <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2023-09-07Revert "io_uring: fix IO hang in io_wq_put_and_exit from do_exit()"Jens Axboe1-32/+0
This reverts commit b484a40dc1f16edb58e5430105a021e1916e6f27. This commit cancels all requests with io-wq, not just the ones from the originating task. This breaks use cases that have thread pools, or just multiple tasks issuing requests on the same ring. The liburing regression test for this also shows that problem: $ test/thread-exit.t cqe->res=-125, Expected 512 where an IO thread gets its request canceled rather than complete successfully. Signed-off-by: Jens Axboe <[email protected]>
2023-09-07io_uring: fix unprotected iopoll overflowPavel Begunkov1-2/+2
[ 71.490669] WARNING: CPU: 3 PID: 17070 at io_uring/io_uring.c:769 io_cqring_event_overflow+0x47b/0x6b0 [ 71.498381] Call Trace: [ 71.498590] <TASK> [ 71.501858] io_req_cqe_overflow+0x105/0x1e0 [ 71.502194] __io_submit_flush_completions+0x9f9/0x1090 [ 71.503537] io_submit_sqes+0xebd/0x1f00 [ 71.503879] __do_sys_io_uring_enter+0x8c5/0x2380 [ 71.507360] do_syscall_64+0x39/0x80 We decoupled CQ locking from ->task_complete but haven't fixed up places forcing locking for CQ overflows. Fixes: ec26c225f06f5 ("io_uring: merge iopoll and normal completion paths") Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-09-07io_uring: break out of iowq iopoll on teardownPavel Begunkov3-0/+13
io-wq will retry iopoll even when it failed with -EAGAIN. If that races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers, such workers might potentially infinitely spin retrying iopoll again and again and each time failing on some allocation / waiting / etc. Don't keep spinning if io-wq is dying. Fixes: 561fb04a6a225 ("io_uring: replace workqueue usage with io-wq") Cc: [email protected] Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-09-07Revert "printk: export symbols for debug modules"Christoph Hellwig1-2/+0
This reverts commit 3e00123a13d824d63072b1824c9da59cd78356d9. No, we never export random symbols for out of tree modules. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Petr Mladek <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-09-07Merge tag 'asoc-fix-v6.6-merge-window' of ↵Takashi Iwai11-31/+96
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.6 A bunch of fixes and new IDs that came in since the initial pull request - all driver specific and nothing too exciting. There's a trivial conflict in the AMD driver ID table due to the last v6.5 fixes not having been merged up.
2023-09-07Merge tag 'nf-23-09-06' of ↵Paolo Abeni6-15/+36
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter updates for net This PR contains nf_tables updates for your *net* tree. This time almost all fixes are for old bugs: First patch fixes a 4-byte stack OOB write, from myself. This was broken ever since nftables was switches from 128 to 32bit register addressing in v4.1. 2nd patch fixes an out-of-bounds read. This has been broken ever since xt_osf got added in 2.6.31, the bug was then just moved around during refactoring, from Wander Lairson Costa. 3rd patch adds a missing enum description, from Phil Sutter. 4th patch fixes a UaF inftables that occurs when userspace adds elements with a timeout so small that expiration happens while the transaction is still in progress. Fix from Pablo Neira Ayuso. Patch 5 fixes a memory out of bounds access, this was broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik. Patch 6 fixes another bogus memory access when building audit record. Bug added in the previous pull request, fix from Pablo. netfilter pull request 2023-09-06 * tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: Unbreak audit log reset netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID netfilter: nfnetlink_osf: avoid OOB read netfilter: nftables: exthdr: fix 4-byte stack OOB write ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07arm64: csum: Fix OoB access in IP checksum code for negative lengthsWill Deacon1-1/+1
Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length calls") added an early return for zero-length input, syzkaller has popped up with an example of a _negative_ length which causes an undefined shift and an out-of-bounds read: | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975 | | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 | Call trace: | dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233 | show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240 | __dump_stack lib/dump_stack.c:88 [inline] | dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 | print_address_description mm/kasan/report.c:351 [inline] | print_report+0x174/0x514 mm/kasan/report.c:462 | kasan_report+0xd4/0x130 mm/kasan/report.c:572 | kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187 | __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31 | do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | csum_partial+0x30/0x58 lib/checksum.c:128 | gso_make_checksum include/linux/skbuff.h:4928 [inline] | __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332 | udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47 | ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119 | skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141 | __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401 | skb_gso_segment include/linux/netdevice.h:4859 [inline] | validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659 | validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709 | sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327 | __dev_xmit_skb net/core/dev.c:3805 [inline] | __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210 | dev_queue_xmit include/linux/netdevice.h:3085 [inline] | packet_xmit+0x6c/0x318 net/packet/af_packet.c:276 | packet_snd net/packet/af_packet.c:3081 [inline] | packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113 | sock_sendmsg_nosec net/socket.c:724 [inline] | sock_sendmsg net/socket.c:747 [inline] | __sys_sendto+0x3b4/0x538 net/socket.c:2144 Extend the early return to reject negative lengths as well, aligning our implementation with the generic code in lib/checksum.c Cc: Robin Murphy <[email protected]> Fixes: 5777eaed566a ("arm64: Implement optimised checksum routine") Reported-by: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2023-09-07Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'Paolo Abeni8-37/+39
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07net: hns3: remove GSO partial feature bitJie Wang1-2/+0
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel packets for example NvGRE packets segment offload and checksum offload is already supported. There is no need to keep gso partial feature bit. So this patch removes it. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07net: hns3: fix the port information display when sfp is absentYisen Zhuang1-1/+3
When sfp is absent or unidentified, the port type should be displayed as PORT_OTHERS, rather than PORT_FIBRE. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Yisen Zhuang <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07net: hns3: fix invalid mutex between tc qdisc and dcb ets command issueJijie Shao4-19/+9
We hope that tc qdisc and dcb ets commands can not be used crosswise. If we want to use any of the commands to configure tc, We must use the other command to clear the existing configuration. However, when we configure a single tc with tc qdisc, we can still configure it with dcb ets. Because we use mqprio_active as the tag of tc qdisc configuration, but with dcb ets, we do not check mqprio_active. This patch fix this issue by check mqprio_active before executing the dcb ets command. and add dcb_ets_active to replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE at the hclge layer, Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07net: hns3: fix debugfs concurrency issue between kfree buffer and readHao Chen1-3/+4
Now in hns3_dbg_uninit(), there may be concurrency between kfree buffer and read, it may result in memory error. Moving debugfs_remove_recursive() in front of kfree buffer to ensure they don't happen at the same time. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()Hao Chen1-7/+7
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as (u32 *) without considerring byte order conversion, it may result in printing wrong data for tcam_data. Convert tcam_data to (__le32 *) first to fix it. Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07net: hns3: Support query tx timeout threshold by debugfsJijie Shao1-0/+4
support query tx timeout threshold by debugfs Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07net: hns3: fix tx timeout issueJian Shen1-5/+12
Currently, the driver knocks the ring doorbell before updating the ring->last_to_use in tx flow. if the hardware transmiting packet and napi poll scheduling are fast enough, it may get the old ring->last_to_use in drivers' napi poll. In this case, the driver will think the tx is not completed, and return directly without clear the flag __QUEUE_STATE_STACK_XOFF, which may cause tx timeout. Fixes: 20d06ca2679c ("net: hns3: optimize the tx clean process") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-09-07ALSA: hda/realtek - ALC287 I2S speaker platform supportKailang Yang1-0/+30
0x17 was only speaker pin, DAC assigned will be 0x03. Headphone assigned to 0x02. Playback via headphone will get EQ filter processing. So,it needs to swap DAC. Tested-by: Mark Pearson <[email protected]> Signed-off-by: Kailang Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-09-07parisc: BTLB: Initialize BTLB tables at CPU startupHelge Deller5-7/+77
Initialize the BTLB entries when starting up a CPU. Note that BTLBs are not available on 64-bit CPUs. Signed-off-by: Helge Deller <[email protected]>
2023-09-07parisc: firmware: Simplify calling non-PA20 functionsHelge Deller2-4/+12
Instead of usig #ifdefs, simply return PDC_BAD_PROC for functions which aren't available on 64-bit CPUs. Signed-off-by: Helge Deller <[email protected]>
2023-09-07parisc: BTLB: _edata symbol has to be page aligned for BTLB supportHelge Deller1-0/+1
Signed-off-by: Helge Deller <[email protected]>
2023-09-07parisc: BTLB: Add BTLB insert and purge firmware function wrappersHelge Deller2-9/+36
Signed-off-by: Helge Deller <[email protected]>
2023-09-07parisc: BTLB: Clear possibly existing BTLB entriesHelge Deller1-3/+13
Call PDC to remove all existing BTLB entries (which may exist from some previous operating system runs) before switching to virtual mode. Signed-off-by: Helge Deller <[email protected]>
2023-09-07parisc: Prepare for Block-TLB support on 32-bit kernelHelge Deller1-0/+2
Change HUGEPAGE_SIZE to become 4 MB on 32-bit kernels, which leads that kernel code and kernel data will start on 4 MB boundaries. Although a 32-bit kernel does not support huge pages, most machines have support for Block-TLBs (BTLB) which allow to configure the system to use large pages (block TLBs) to minimize the TLB contention. This is done through calls to PDC and the 32-bit kernel can then call BTLB PDC functions to tell the machine to optimize the TLBs. Signed-off-by: Helge Deller <[email protected]>
2023-09-07parisc: shmparam.h: Document aliasing requirements of PA-RISCHelge Deller1-0/+15
Add some documentation why PA-RISC uses SHMLBA and SHM_COLOUR. Signed-off-by: Helge Deller <[email protected]>
2023-09-07cifs: update internal module version number for cifs.koSteve French1-2/+2
From 2.44 to 2.45 Signed-off-by: Steve French <[email protected]>
2023-09-07smb3: allow controlling maximum number of cached directoriesSteve French7-6/+22
Allow adjusting the maximum number of cached directories per share (defaults to 16) via mount parm "max_cached_dirs" Signed-off-by: Steve French <[email protected]>
2023-09-07smb3: add trace point for queryfs (statfs)Steve French2-1/+2
In debugging a recent performance problem with statfs, it would have been helpful to be able to trace the smb3 query fs info request more narrowly. Add a trace point "smb3_qfs_done" Which displays: stat-68950 [008] ..... 1472.360598: smb3_qfs_done: xid=14 sid=0xaa9765e4 tid=0x95a76f54 unc_name=\\localhost\test rc=0 Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-09-07LoongArch: Update Loongson-3 default config fileHuacai Chen1-4/+70
1, Enable LSX and LASX. 2, Enable KASLR (CONFIG_RANDOMIZE_BASE). 3, Enable jump label (patching mechanism for static key). 4, Enable LoongArch CRC32(c) Acceleration. 5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI. 6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems. 7, Enable WangXun NGBE/TXGBE NIC drivers. 8, Enable some IPVS options. 9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig. 10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig. 11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig. 12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU. Signed-off-by: Trevor Woerner <[email protected]> Signed-off-by: Xuewen Wang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-09-06net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)Lukasz Majewski3-4/+22
The KSZ9477 errata points out (in 'Module 4') the link up/down problems when EEE (Energy Efficient Ethernet) is enabled in the device to which the KSZ9477 tries to auto negotiate. The suggested workaround is to clear advertisement of EEE for PHYs in this chip driver. To avoid regressions with other switch ICs the new MICREL_NO_EEE flag has been introduced. Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV MMD register is removed, as this code is both; now executed too late (after previous rework of the PHY and DSA for KSZ switches) and not required as setting all members of eee_broken_modes bit field prevents the KSZ9477 from advertising EEE. Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ9477 Signed-off-by: Lukasz Majewski <[email protected]> Tested-by: Oleksij Rempel <[email protected]> # Confirmed disabled EEE with oscilloscope. Reviewed-by: Oleksij Rempel <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-09-06drm/amdgpu: Restrict bootloader wait to SMUv13.0.6Lijo Lazar1-4/+14
Restrict the wait for boot loader steady state only to SMUv13.0.6. For older SOCs, ASIC init has a longer wait period and that takes care. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06drm/amd/display: prevent potential division by zero errorsHamza Mahfooz1-3/+6
There are two places in apply_below_the_range() where it's possible for a divide by zero error to occur. So, to fix this make sure the divisor is non-zero before attempting the computation in both cases. Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637 Fixes: a463b263032f ("drm/amd/display: Fix frames_to_insert math") Fixes: ded6119e825a ("drm/amd/display: Reinstate LFC optimization") Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gammaMelissa Wen1-0/+7
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma using a pre-defined sRGB transfer function. It works fine for DCN2 family where degamma ROM and custom curves go to the same color block. But, on DCN3+, degamma is split into two blocks: degamma ROM for pre-defined TFs and `gamma correction` for user/custom curves and degamma ROM settings doesn't apply to cursor plane. To get DRM legacy gamma working as expected, enable cursor degamma ROM for implict sRGB degamma on HW with this configuration. Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803 Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+") Signed-off-by: Melissa Wen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1Hamza Mahfooz1-1/+2
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs can cause the display to flicker and underflow to occur, we shouldn't call it for them. So, ensure that the DCN version is less than DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup(). Cc: [email protected] Reviewed-by: Fangzhi Zuo <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06Revert "drm/amd/display: Remove v_startup workaround for dcn3+"Hamza Mahfooz1-20/+4
This reverts commit 3a31e8b89b7240d9a17ace8a1ed050bdcb560f9e. We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+ ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up. Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809 Reviewed-by: Fangzhi Zuo <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-06Merge tag 'for-netdev' of ↵Jakub Kicinski12-44/+189
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-09-06 We've added 9 non-merge commits during the last 6 day(s) which contain a total of 12 files changed, 189 insertions(+), 44 deletions(-). The main changes are: 1) Fix bpf_sk_storage to address an invalid wait context lockdep report and another one to address missing omem uncharge, from Martin KaFai Lau. 2) Two BPF recursion detection related fixes, from Sebastian Andrzej Siewior. 3) Fix tailcall limit enforcement in trampolines for s390 JIT, from Ilya Leoshkevich. 4) Fix a sockmap refcount race where skbs in sk_psock_backlog can be referenced after user space side has already skb_consumed them, from John Fastabend. 5) Fix BPF CI flake/race wrt sockmap vsock write test where the transport endpoint is not connected, from Xu Kuohai. 6) Follow-up doc fix to address a cross-link warning, from Eduard Zingerman. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc bpf: bpf_sk_storage: Fix invalid wait context lockdep report s390/bpf: Pass through tail call counter in trampolines bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check. bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf(). bpf, sockmap: Fix skb refcnt race after locking changes docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst selftests/bpf: Fix a CI failure caused by vsock write ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-09-06x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()Jack Wang1-0/+3
On large enclaves we hit the softlockup warning with following call trace: xa_erase() sgx_vepc_release() __fput() task_work_run() do_exit() The latency issue is similar to the one fixed in: 8795359e35bc ("x86/sgx: Silence softlockup detection when releasing large enclaves") The test system has 64GB of enclave memory, and all is assigned to a single VM. Release of 'vepc' takes a longer time and causes long latencies, which triggers the softlockup warning. Add cond_resched() to give other tasks a chance to run and reduce latencies, which also avoids the softlockup detector. [ mingo: Rewrote the changelog. ] Fixes: 540745ddbc70 ("x86/sgx: Introduce virtual EPC for use by KVM guests") Reported-by: Yu Zhang <[email protected]> Signed-off-by: Jack Wang <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Yu Zhang <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Reviewed-by: Kai Huang <[email protected]> Acked-by: Haitao Huang <[email protected]> Cc: [email protected]
2023-09-06x86: Remove the arch_calc_vm_prot_bits() macro from the UAPIThomas Huth3-9/+15
The arch_calc_vm_prot_bits() macro uses VM_PKEY_BIT0 etc. which are not part of the UAPI, so the macro is completely useless for userspace. It is also hidden behind the CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS config switch which we shouldn't expose to userspace. Thus let's move this macro into a new internal header instead. Fixes: 8f62c883222c ("x86/mm/pkeys: Add arch-specific VMA protection bits") Signed-off-by: Thomas Huth <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Nicolas Schier <[email protected]> Acked-by: Dave Hansen <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-09-06x86/build: Fix linker fill bytes quirk/incompatibility for ld.lldSong Liu1-1/+1
With ":text =0xcccc", ld.lld fills unused text area with 0xcccc0000. Example objdump -D output: ffffffff82b04203: 00 00 add %al,(%rax) ffffffff82b04205: cc int3 ffffffff82b04206: cc int3 ffffffff82b04207: 00 00 add %al,(%rax) ffffffff82b04209: cc int3 ffffffff82b0420a: cc int3 Replace it with ":text =0xcccccccc", so we get the following instead: ffffffff82b04203: cc int3 ffffffff82b04204: cc int3 ffffffff82b04205: cc int3 ffffffff82b04206: cc int3 ffffffff82b04207: cc int3 ffffffff82b04208: cc int3 gcc/ld doesn't seem to have the same issue. The generated code stays the same for gcc/ld. Signed-off-by: Song Liu <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Kees Cook <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes") Link: https://lore.kernel.org/r/[email protected]
2023-09-06powercap: intel_rapl: Fix invalid setting of Power Limit 4Srinivas Pandruvada1-3/+1
System runs at minimum performance, once powercap RAPL package domain enabled flag is changed from 1 to 0 to 1. Setting RAPL package domain enabled flag to 0, results in setting of power limit 4 (PL4) MSR 0x601 to 0. This implies disabling PL4 limit. The PL4 limit controls the peak power. So setting 0, results in some undesirable performance, which depends on hardware implementation. Even worse, when the enabled flag is set to 1 again. This will set PL4 MSR value to 0x01, which means reduce peak power to 0.125W. This will force system to run at the lowest possible performance on every PL4 supported system. Setting enabled flag should only affect the "enable" bit, not other bits. Here it is changing power limit. This is caused by a change which assumes that there is an enable bit in the PL4 MSR like other power limits. Although PL4 enable/disable bit is present with TPMI RAPL interface, it is not present with the MSR interface. There is a rapl_primitive_info defined for non existent PL4 enable bit and then it is used with the commit 9050a9cd5e4c ("powercap: intel_rapl: Cleanup Power Limits support") to enable PL4. This is wrong, hence remove this rapl primitive for PL4. Also in the function rapl_detect_powerlimit(), PL_ENABLE is used to check for the presence of power limits. Replace PL_ENABLE with PL_LIMIT, as PL_LIMIT must be present. Without this change, PL4 controls will not be available in the sysfs once rapl primitive for PL4 is removed. Fixes: 9050a9cd5e4c ("powercap: intel_rapl: Cleanup Power Limits support") Suggested-by: Zhang Rui <[email protected]> Signed-off-by: Srinivas Pandruvada <[email protected]> Tested-by: Sumeet Pawnikar <[email protected]> Cc: 6.5+ <[email protected]> # 6.5+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-09-06Merge tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds28-528/+4484
Pull ceph updates from Ilya Dryomov: "Mixed with some fixes and cleanups, this brings in reasonably complete fscrypt support to CephFS! The list of things which don't work with encryption should be fairly short, mostly around the edges: fallocate (not supported well in CephFS to begin with), copy_file_range (requires re-encryption), non-default striping patterns. This was a multi-year effort principally by Jeff Layton with assistance from Xiubo Li, Luís Henriques and others, including several dependant changes in the MDS, netfs helper library and fscrypt framework itself" * tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits) ceph: make num_fwd and num_retry to __u32 ceph: make members in struct ceph_mds_request_args_ext a union rbd: use list_for_each_entry() helper libceph: do not include crypto/algapi.h ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper ceph: fix updating i_truncate_pagecache_size for fscrypt ceph: wait for OSD requests' callbacks to finish when unmounting ceph: drop messages from MDS when unmounting ceph: update documentation regarding snapshot naming limitations ceph: prevent snapshot creation in encrypted locked directories ceph: add support for encrypted snapshot names ceph: invalidate pages when doing direct/sync writes ceph: plumb in decryption during reads ceph: add encryption support to writepage and writepages ceph: add read/modify/write to ceph_sync_write ceph: align data in pages in ceph_sync_write ceph: don't use special DIO path for encrypted inodes ceph: add truncate size handling support for fscrypt ceph: add object version support for sync read libceph: allow ceph_osdc_new_request to accept a multi-op read ...
2023-09-06ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TLMario Limonciello1-0/+7
Lenovo 82TL has DMIC connected like 82V2 does. Also match 82TL. Reported-by: [email protected] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217063 Signed-off-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-09-06arm64/sysreg: Fix broken strncpy() -> strscpy() conversionWill Deacon1-3/+3
Mostafa reports that commit d232606773a0 ("arm64/sysreg: refactor deprecated strncpy") breaks our early command-line parsing because the original code is working on space-delimited substrings rather than NUL-terminated strings. Rather than simply reverting the broken conversion patch, replace the strscpy() with a simple memcpy() with an explicit NUL-termination of the result. Reported-by: Mostafa Saleh <[email protected]> Tested-by: Mostafa Saleh <[email protected]> Fixes: d232606773a0 ("arm64/sysreg: refactor deprecated strncpy") Signed-off-by: Justin Stitt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2023-09-06PCI: Free released resource after coalescingRoss Lagerwall1-0/+1
release_resource() doesn't actually free the resource or resource list entry so free the resource list entry to avoid a leak. Closes: https://lore.kernel.org/r/[email protected]/ Fixes: e54223275ba1 ("PCI: Release resource invalidated by coalescing") Link: https://lore.kernel.org/r/[email protected] Reported-by: Kalle Valo <[email protected]> Tested-by: Kalle Valo <[email protected]> Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected] # v5.16+
Powered by cgit, Gruvboxed by Blaster4385.