aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-06-11Merge branch '10GbE' of ↵David S. Miller5-25/+48
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-06-11 This series contains fixes to ixgbe IPsec and MACVLAN. Alex provides the 5 fixes in this series, starting with fixing an issue where num_rx_pools was not being populated until after the queues and interrupts were reinitialized when enabling MACVLAN interfaces. Updated to use CONFIG_XFRM_OFFLOAD instead of CONFIG_XFRM, since the code requires CONFIG_XFRM_OFFLOAD to be enabled. Moved the IPsec initialization function to be more consistent with the placement of similar initialization functions and before the call to reset the hardware, which will clean up any link issues that may have been introduced. Fixed the boolean logic that was testing for transmit OR receive ready bits, when it should have been testing for transmit AND receive ready bits. Fixed the bit definitions for SECTXSTAT and SECRXSTAT registers and ensure that if IPsec is disabled on the part, do not enable it. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-06-11Merge branch 'next/defconfig' into next/socOlof Johansson7-4/+70
Merging in defconfig updates. It's useful to keep them separate during development but little point in merging them upstream on their own. * next/defconfig: (40 commits) arm64: defconfig: Enable PCIe on msm8996 and db820c arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 arm64: defconfig: enable the Armada thermal driver ARM: multi_v7_defconfig: Enable RENESAS_WDT ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN arm64: defconfig: enable R8A77990 SoC ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC support arm64: defconfig: Increase CMA size for VC4 arm64: defconfig: enable rockchip efuse ARM: imx_v6_v7_defconfig: Select CONFIG_GPIO_MAX732X by default ARM: imx_v6_v7_defconfig: enable imx6sll by default arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD arm64: defconfig: makes SND_SIMPLE_CARD to module ARM: multi_v7_defconfig: enable the Meson PWM controller arm: multi_v7_defconfig: enable the Amlogic Meson I2C driver arm64: defconfig: enable CONFIG_SPI_ARMADA_3700 arm64: defconfig: Enable CONFIG_PINCTRL_MT7622 by default arm64: defconfig: Enable bluetooth USB support ... Signed-off-by: Olof Johansson <[email protected]>
2018-06-11net/ipv6: Ensure cfg is properly initialized in ipv6_create_tempaddrDavid Ahern1-1/+1
Valdis reported a BUG in ipv6_add_addr: [ 1820.832682] BUG: unable to handle kernel NULL pointer dereference at 0000000000000209 [ 1820.832728] RIP: 0010:ipv6_add_addr+0x280/0xd10 [ 1820.832732] Code: 49 8b 1f 0f 84 6a 0a 00 00 48 85 db 0f 84 4e 0a 00 00 48 8b 03 48 8b 53 08 49 89 45 00 49 8b 47 10 49 89 55 08 48 85 c0 74 15 <48> 8b 50 08 48 8b 00 49 89 95 b8 01 00 00 49 89 85 b0 01 00 00 4c [ 1820.832847] RSP: 0018:ffffaa07c2fd7880 EFLAGS: 00010202 [ 1820.832853] RAX: 0000000000000201 RBX: ffffaa07c2fd79b0 RCX: 0000000000000000 [ 1820.832858] RDX: a4cfbfba2cbfa64c RSI: 0000000000000000 RDI: ffffffff8a8e9fa0 [ 1820.832862] RBP: ffffaa07c2fd7920 R08: 000000000000017a R09: ffffffff8a555300 [ 1820.832866] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888d18e71c00 [ 1820.832871] R13: ffff888d0a9b1200 R14: 0000000000000000 R15: ffffaa07c2fd7980 [ 1820.832876] FS: 00007faa51bdb800(0000) GS:ffff888d1d400000(0000) knlGS:0000000000000000 [ 1820.832880] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1820.832885] CR2: 0000000000000209 CR3: 000000021e8f8001 CR4: 00000000001606e0 [ 1820.832888] Call Trace: [ 1820.832898] ? __local_bh_enable_ip+0x119/0x260 [ 1820.832904] ? ipv6_create_tempaddr+0x259/0x5a0 [ 1820.832912] ? __local_bh_enable_ip+0x139/0x260 [ 1820.832921] ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832926] ? ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832941] manage_tempaddrs+0x1a5/0x240 [ 1820.832951] inet6_addr_del+0x20b/0x3b0 [ 1820.832959] ? nla_parse+0xce/0x1e0 [ 1820.832968] inet6_rtm_deladdr+0xd9/0x210 [ 1820.832981] rtnetlink_rcv_msg+0x1d4/0x5f0 Looking at the code I found 1 element (peer_pfx) of the newly introduced ifa6_config struct that is not initialized. Use a memset rather than hard coding an init for each struct element. Reported-by: Valdis Kletnieks <[email protected]> Fixes: e6464b8c63619 ("net/ipv6: Convert ipv6_add_addr to struct ifa6_config") Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-11tls: fix NULL pointer dereference on pollDaniel Borkmann3-15/+12
While hacking on kTLS, I ran into the following panic from an unprivileged netserver / netperf TCP session: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000037f378067 P4D 800000037f378067 PUD 3c0e61067 PMD 0 Oops: 0010 [#1] SMP KASAN PTI CPU: 1 PID: 2289 Comm: netserver Not tainted 4.17.0+ #139 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88036abcf740 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88036f5f6800 RCX: 1ffff1006debed26 RDX: ffff88036abcf920 RSI: ffff8803cb1a4f00 RDI: ffff8803c258c280 RBP: ffff8803c258c280 R08: ffff8803c258c280 R09: ffffed006f559d48 R10: ffff88037aacea43 R11: ffffed006f559d49 R12: ffff8803c258c280 R13: ffff8803cb1a4f20 R14: 00000000000000db R15: ffffffffc168a350 FS: 00007f7e631f4700(0000) GS:ffff8803d1c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000003ccf64005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? tls_sw_poll+0xa4/0x160 [tls] ? sock_poll+0x20a/0x680 ? do_select+0x77b/0x11a0 ? poll_schedule_timeout.constprop.12+0x130/0x130 ? pick_link+0xb00/0xb00 ? read_word_at_a_time+0x13/0x20 ? vfs_poll+0x270/0x270 ? deref_stack_reg+0xad/0xe0 ? __read_once_size_nocheck.constprop.6+0x10/0x10 [...] Debugging further, it turns out that calling into ctx->sk_poll() is invalid since sk_poll itself is NULL which was saved from the original TCP socket in order for tls_sw_poll() to invoke it. Looks like the recent conversion from poll to poll_mask callback started in 152524231023 ("net: add support for ->poll_mask in proto_ops") missed to eventually convert kTLS, too: TCP's ->poll was converted over to the ->poll_mask in commit 2c7d3dacebd4 ("net/tcp: convert to ->poll_mask") and therefore kTLS wrongly saved the ->poll old one which is now NULL. Convert kTLS over to use ->poll_mask instead. Also instead of POLLIN | POLLRDNORM use the proper EPOLLIN | EPOLLRDNORM bits as the case in tcp_poll_mask() as well that is mangled here. Fixes: 2c7d3dacebd4 ("net/tcp: convert to ->poll_mask") Signed-off-by: Daniel Borkmann <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Dave Watson <[email protected]> Tested-by: Dave Watson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-11xsk: silence warning on memory allocation failureBjörn Töpel1-1/+2
syzkaller reported a warning from xdp_umem_pin_pages(): WARNING: CPU: 1 PID: 4537 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996 ... __do_kmalloc mm/slab.c:3713 [inline] __kmalloc+0x25/0x760 mm/slab.c:3727 kmalloc_array include/linux/slab.h:634 [inline] kcalloc include/linux/slab.h:645 [inline] xdp_umem_pin_pages net/xdp/xdp_umem.c:205 [inline] xdp_umem_reg net/xdp/xdp_umem.c:318 [inline] xdp_umem_create+0x5c9/0x10f0 net/xdp/xdp_umem.c:349 xsk_setsockopt+0x443/0x550 net/xdp/xsk.c:531 __sys_setsockopt+0x1bd/0x390 net/socket.c:1935 __do_sys_setsockopt net/socket.c:1946 [inline] __se_sys_setsockopt net/socket.c:1943 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1943 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is a warning about attempting to allocate more than KMALLOC_MAX_SIZE memory. The request originates from userspace, and if the request is too big, the kernel is free to deny its allocation. In this patch, the failed allocation attempt is silenced with __GFP_NOWARN. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: [email protected] Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller15-36/+99
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Reject non-null terminated helper names from xt_CT, from Gao Feng. 2) Fix KASAN splat due to out-of-bound access from commit phase, from Alexey Kodanev. 3) Missing conntrack hook registration on IPVS FTP helper, from Julian Anastasov. 4) Incorrect skbuff allocation size in bridge nft_reject, from Taehee Yoo. 5) Fix inverted check on packet xmit to non-local addresses, also from Julian. 6) Fix ebtables alignment compat problems, from Alin Nastac. 7) Hook mask checks are not correct in xt_set, from Serhey Popovych. 8) Fix timeout listing of element in ipsets, from Jozsef. 9) Cap maximum timeout value in ipset, also from Jozsef. 10) Don't allow family option for hash:mac sets, from Florent Fourcot. 11) Restrict ebtables to work with NFPROTO_BRIDGE targets only, this Florian. 12) Another bug reported by KASAN in the rbtree set backend, from Taehee Yoo. 13) Missing __IPS_MAX_BIT update doesn't include IPS_OFFLOAD_BIT. From Gao Feng. 14) Missing initialization of match/target in ebtables, from Florian Westphal. 15) Remove useless nft_dup.h file in include path, from C. Labbe. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-06-11net: dsa: add error handling for pskb_trim_rcsumZhouyang Jia1-1/+2
When pskb_trim_rcsum fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling pskb_trim_rcsum. Signed-off-by: Zhouyang Jia <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-11ipv6: allow PMTU exceptions to local routesJulian Anastasov1-3/+0
IPVS setups with local client and remote tunnel server need to create exception for the local virtual IP. What we do is to change PMTU from 64KB (on "lo") to 1460 in the common case. Suggested-by: Martin KaFai Lau <[email protected]> Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Fixes: 7343ff31ebf0 ("ipv6: Don't create clones of host routes.") Signed-off-by: Julian Anastasov <[email protected]> Acked-by: David Ahern <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-11Merge tag 'linux-watchdog-4.18-rc1' of ↵Linus Torvalds10-60/+100
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: "Core: - simplify getting .drvdata renesas_wdt: - add support for the R8A77965 WDT and R-Car Gen2 - remove R-Car M2-W ES2.x from blacklist sp805: - add restart handler hpwdt: - claim NMIs generated by iLO5 mena21_wdt: - drop unnecessary mutex lock da9062 & da9063: - fixes and general cleanups" * tag 'linux-watchdog-4.18-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9063: remove duplicated timeout_to_sel calls watchdog: da9063: rename helper function to avoid misunderstandings watchdog: da9062: remove unused code watchdog: da9063: Fix timeout handling during probe watchdog: da9063: Fix updating timeout value watchdog: da9063: Fix setting/changing timeout dt-bindings: watchdog: renesas-wdt: Add R-Car Gen2 support watchdog: mena21_wdt: Drop unnecessary mutex lock watchdog: renesas-wdt: Add support for the R8A77965 WDT watchdog: hpwdt: Claim NMIs generated by iLO5 watchdog: sp805: add restart handler watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklist watchdog: simplify getting .drvdata
2018-06-11Revert "iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and ↵Linus Torvalds2-22/+47
dma_direct_{alloc,free}()" This reverts commit b468620f2a1dfdcfddfd6fa54367b8bcc1b51248. It turns out that this broke drm on AMD platforms. Quoting Gabriel C: "I can confirm reverting b468620f2a1dfdcfddfd6fa54367b8bcc1b51248 fixes that issue for me. The GPU is working fine with SME enabled. Now with working GPU :) I can also confirm performance is back to normal without doing any other workarounds" Christan König analyzed it partially: "As far as I analyzed it we now get an -ENOMEM from dma_alloc_attrs() in drivers/gpu/drm/ttm/ttm_page_alloc_dma.c when IOMMU is enabled" and Christoph Hellwig responded: "I think the prime issue is that dma_direct_alloc respects the dma mask. Which we don't need if actually using the iommu. This would be mostly harmless exept for the the SEV bit high in the address that makes the checks fail. For now I'd say revert this commit for 4.17/4.18-rc and I'll look into addressing these issues properly" Reported-and-bisected-by: Gabriel C <[email protected]> Acked-by: Christoph Hellwig <[email protected]> Cc: Christian König <[email protected]> Cc: Michel Dänzer <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: Andrew Morton <[email protected]> Cc: [email protected] # v4.17 Signed-off-by: Linus Torvalds <[email protected]>
2018-06-11ntb: ntb_transport: Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai1-2/+2
ntb_transport_create_queue ntb_transport_create_queue() is never called in atomic context. ntb_transport_create_queue() is only called by ntb_netdev_probe(), which is set as ".probe" in struct ntb_transport_client. Despite never getting called from atomic context, ntb_transport_create_queue() calls kzalloc_node() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-06-11ntb: ntb_transport: Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai1-1/+1
ntb_transport_setup_qp_mw ntb_transport_setup_qp_mw() is never called in atomic context. ntb_transport_setup_qp_mw() is only called by ntb_transport_link_work(), which is set as a parameter of INIT_DELAYED_WORK() in ntb_transport_probe(). Despite never getting called from atomic context, ntb_transport_setup_qp_mw() calls kzalloc_node() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-06-11NTB: ntb_hw_idt: fix typo 'can by' to 'can be'Wolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Serge Semin <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-06-11ntb: intel: change references of skx to gen3Dave Jiang4-130/+126
Change all references to skx to gen3 NTB. Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-06-11ntb: intel: split out the gen3 codeDave Jiang6-657/+754
Move the Intel hw gen3 code to its own source file. The ntb_hw_intel.c was getting too large and makes it hard to maintain with future hardware changes. Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-06-11ntb: intel: header definitions refactorDave Jiang4-142/+237
Break out the generation specific definitions to different headers Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2018-06-11Merge tag 'rpmsg-v4.18' of git://github.com/andersson/remoteprocLinus Torvalds15-145/+139
Pull rpmsg updates from Bjorn Andersson: "This migrates rpmsg to use SPDX license headers and fixes a use-after-free in SMD" * tag 'rpmsg-v4.18' of git://github.com/andersson/remoteproc: rpmsg: smd: do not use mananged resources for endpoints and channels rpmsg: char: Switch to SPDX license identifier rpmsg: glink: Switch to SPDX license identifier rpmsg: smd: Switch to SPDX license identifier rpmsg: virtio_rpmsg_bus: Switch to SPDX license identifier rpmsg: Switch to SPDX license identifier rpmsg: qcom_smd: Access APCS through mailbox framework rpmsg: Add driver_override device attribute for rpmsg_device
2018-06-11Merge tag 'rproc-v4.18' of git://github.com/andersson/remoteprocLinus Torvalds5-83/+188
Pull remoteproc updates from Bjorn Andersson: "This brings a few minor fixes to the Davinci driver, drops a orphan include file from the StE cleanup done ealier and introduces support for booting the modem on Qualcomm's SDM845 platform" * tag 'rproc-v4.18' of git://github.com/andersson/remoteproc: remoteproc: q6v5: Allow defining GLINK edge for mss remoteproc remoteproc: q6v5: Add support for mss remoteproc on SDM845 remoteproc: q6v5: Introduce reset assert/deassert helper functions dt-bindings: remoteproc: Add Q6v5 Modem PIL binding for SDM845 remoteproc: q6v5: Move proxy unvote to handover irq handler remoteproc: q6v5: Return irq from q6v5_request_irq() remoteproc/ste: remove abandoned include file remoteproc/davinci: use octal permissions for module_param() remoteproc/davinci: prepare and unprepare the clock where needed remoteproc/davinci: add the missing retval check for clk_enable() remoteproc: Remove depends on HAS_DMA in case of platform dependency remoteproc: Prevent incorrect rproc state on xfer mem ownership failure
2018-06-11Merge tag 'hwlock-v4.18' of git://github.com/andersson/remoteprocLinus Torvalds9-81/+118
Pull hwspinlock updates from Bjorn Andersson: "In addition to migrating the files to use SPDX license headers this introduces the ability for clients to operate a hwlock without the framework taking any additional locks" * tag 'hwlock-v4.18' of git://github.com/andersson/remoteproc: hwspinlock/u8500: Switch to SPDX license identifier hwspinlock: sprd: Switch to SPDX license identifier hwspinlock/sirf: Switch to SPDX license identifier hwspinlock: qcom: Switch to SPDX license identifier hwspinlock/omap: Switch to SPDX license identifier hwspinlock/core: Switch to SPDX license identifier hwspinlock: Introduce one new mode for hwspinlock hwspinlock: Convert to use 'switch' statement
2018-06-11ia64: disable CONFIG_PERFMON at least for nowLinus Torvalds1-0/+1
Al noted that the semantics of the ia64 perfmon mmap() is really wrong, and can cause serious VM problems. Before we look at whether it needs to be fixed, let's see if anybody even uses it, and mark it broken. It may be that we can just remove the code entirely. Reported-by: Alexander Viro <[email protected]> Acked-by: Matthew Wilcox <[email protected]> Acked-by: Stephane Eranian <[email protected]> Cc: Tony Luck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-06-11Merge tag 'f2fs-for-4.18' of ↵Linus Torvalds28-1388/+1880
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've mainly focused on discard, aka unmap, control along with fstrim for Android-specific usage model. In addition, we've fixed writepage flow which returned EAGAIN previously resulting in EIO of fsync(2) due to mapping's error state. In order to avoid old MM bug [1], we decided not to use __GFP_ZERO for the mapping for node and meta page caches. As always, we've cleaned up many places for future fsverity and symbol conflicts. Enhancements: - do discard/fstrim in lower priority considering fs utilization - split large discard commands into smaller ones for better responsiveness - add more sanity checks to address syzbot reports - add a mount option, fsync_mode=nobarrier, which can reduce # of cache flushes - clean up symbol namespace with modified function names - be strict on block allocation and IO control in corner cases Bug fixes: - don't use __GFP_ZERO for mappings - fix error reports in writepage to avoid fsync() failure - avoid selinux denial on CAP_RESOURCE on resgid/resuid - fix some subtle race conditions in GC/atomic writes/shutdown - fix overflow bugs in sanity_check_raw_super - fix missing bits on get_flags Clean-ups: - prepare the generic flow for future fsverity integration - fix some broken coding standard" [1] https://lkml.org/lkml/2018/4/8/661 * tag 'f2fs-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (79 commits) f2fs: fix to clear FI_VOLATILE_FILE correctly f2fs: let sync node IO interrupt async one f2fs: don't change wbc->sync_mode f2fs: fix to update mtime correctly fs: f2fs: insert space around that ':' and ', ' fs: f2fs: add missing blank lines after declarations fs: f2fs: changed variable type of offset "unsigned" to "loff_t" f2fs: clean up symbol namespace f2fs: make set_de_type() static f2fs: make __f2fs_write_data_pages() static f2fs: fix to avoid accessing cross the boundary f2fs: fix to let caller retry allocating block address disable loading f2fs module on PAGE_SIZE > 4KB f2fs: fix error path of move_data_page f2fs: don't drop dentry pages after fs shutdown f2fs: fix to avoid race during access gc_thread pointer f2fs: clean up with clear_radix_tree_dirty_tag f2fs: fix to don't trigger writeback during recovery f2fs: clear discard_wake earlier f2fs: let discard thread wait a little longer if dev is busy ...
2018-06-11RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfigPalmer Dabbelt1-0/+1
The SBI exists on all RISC-V systems, so there's no reason not to compile this driver in. Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11RISC-V: Make our port sparse-cleanPalmer Dabbelt6-9/+14
This patch set contains a handful of fixes that clean up the sparse results for the RISC-V port. These patches shouldn't have any functional difference. The patches: * Use NULL instead of 0. * Clean up __user annotations. * Split __copy_user into two functions, to make the __user annotations valid. Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11MAINTAINERS: RISC-V UpdatesPalmer Dabbelt1-1/+9
This patch set contains a pair of RISC-V related updates to the MAINTAINERS file: * Albert is now back at UC Berkeley. * I've added myself as a maintainer for anything with "sifive" in the name. Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11RISC-V: Handle R_RISCV_32 in modulesAndreas Schwab1-0/+12
With CONFIG_MODVERSIONS=y the R_RISCV_32 relocation is used by the __kcrctab section. Signed-off-by: Andreas Schwab <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't setAlan Kao1-1/+1
The EXPORT_SYMBOL(_mcount) for RISC-V ended up inside a CONFIG_DYNAMIC_FTRACE ifdef. If you enable modules without enabling CONFIG_DYNAMIC_FTRACE then you'll get a build error without this patch because the modules won't be able to find _mcount. The new behavior is to export _mcount whenever CONFIG_FUNCTION_TRACER is defined. This matches what every other architecture is doing. Signed-off-by: Alan Kao <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Zong Li <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11riscv: add riscv-specific predefines to CHECKFLAGSLuc Van Oostenryck1-0/+3
RISC-V uses the macro __riscv_xlen, predefined by GCC, to make the distinction between 32 or 64 bit code. However, sparse doesn't know anything about this macro which lead to wrong warnings and failures. Fix this by adding a define of __riscv_xlen to CHECKFLAGS and add one for __riscv too. Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11ixgbe: Fix bit definitions and add support for testing for ipsec supportAlexander Duyck2-3/+17
This patch addresses two issues. First it adds the correct bit definitions for the SECTXSTAT and SECRXSTAT registers. Then it makes use of those definitions to test for if IPsec has been disabled on the part and if so we do not enable it. Signed-off-by: Alexander Duyck <[email protected]> Reported-by: Andre Tomt <[email protected]> Acked-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-06-11ixgbe: Avoid loopback and fix boolean logic in ipsec_stop_dataAlexander Duyck1-2/+11
This patch fixes two issues. First we add an early test for the Tx and Rx security block ready bits. By doing this we can avoid the need for waits or loopback in the event that the security block is already flushed out. Secondly we fix the boolean logic that was testing for the Tx OR Rx ready bits being set and change it so that we only exit if the Tx AND Rx ready bits are both set. Signed-off-by: Alexander Duyck <[email protected]> Acked-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-06-11ixgbe: Move ipsec init function to before reset callAlexander Duyck2-9/+9
This patch moves the IPsec init function in ixgbe_sw_init. This way it is a bit more consistent with the placement of similar initialization functions and is placed before the reset_hw call which should allow us to clean up any link issues that may be introduced by the fact that we force the link up if somehow the device had IPsec still enabled before the driver was loaded. In addition to the function move it is necessary to change the assignment of netdev->features. The easiest way to do this is to just test for the existence of adapter->ipsec and if it is present we set the feature bits. Fixes: 49a94d74d948 ("ixgbe: add ipsec engine start and stop routines") Reported-by: Andre Tomt <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Acked-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-06-11ixgbe: Use CONFIG_XFRM_OFFLOAD instead of CONFIG_XFRMAlexander Duyck2-3/+3
There is no point in adding code if CONFIG_XFRM is defined that we won't use unless CONFIG_XFRM_OFFLOAD is defined. So instead of leaving this code floating around I am replacing the ifdef with what I believe is the correct one so that we only include the code and variables if they will actually be used. Signed-off-by: Alexander Duyck <[email protected]> Acked-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-06-11autofs: remove left-over autofs4 stubsLinus Torvalds6-57/+12
There's no need to retain the fs/autofs4 directory for backward compatibility. Adding an AUTOFS4_FS fragment to the autofs Kconfig and a module alias for autofs4 is sufficient for almost all cases. Not keeping fs/autofs4 remnants will prevent "insmod <path>/autofs4/autofs4.ko" from working but this shouldn't be used in automation scripts rather than modprobe(8). There were some comments about things to look out for with the module rename in the fs/autofs4/Kconfig that is removed by this patch, see the commit patch if you are interested. One potential problem with this change is that when the fs/autofs/Kconfig fragment for AUTOFS4_FS is removed any AUTOFS4_FS entries will be removed from the kernel config, resulting in no autofs file system being built if there is no AUTOFS_FS entry also. This would have also happened if the fs/autofs4 remnants had remained and is most likely to be a problem with automated builds. Please check your build configurations before the removal which will occur after the next couple of kernel releases. Acked-by: Ian Kent <[email protected]> [ With edits and commit message from Ian Kent ] Signed-off-by: Linus Torvalds <[email protected]>
2018-06-11ixgbe: Fix setting of TC configuration for macvlan caseAlexander Duyck2-8/+8
When we were enabling macvlan interfaces we weren't correctly configuring things until ixgbe_setup_tc was called a second time either by tweaking the number of queues or increasing the macvlan count past 15. The issue came down to the fact that num_rx_pools is not populated until after the queues and interrupts are reinitialized. Instead of trying to set it sooner we can just move the call to setup at least 1 traffic class to the SR-IOV/VMDq setup function so that we just set it for this one case. We already had a spot that was configuring the queues for TC 0 in the code here anyway so it makes sense to also set the number of TCs here as well. Fixes: 49cfbeb7a95c ("ixgbe: Fix handling of macvlan Tx offload") Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-06-11Merge tag 'backlight-next-4.18' of ↵Linus Torvalds19-46/+466
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Frameworks - Provide helpers to enable/disable backlight - Provide standard and devres versions OF find helpers New Drivers: - Add support for the Zodiac Inflight Innovations RAVE Supervisory Processor New Functionality: - Allow pwm-on/pwm-off delay to be specified via DT Bug Fixes: - Fix ordering of the power {en,dis}able and PWM {en,dis}able signals - Fix Device Tree node look-up" * tag 'backlight-next-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: as3711_bl: Fix Device Tree node leaks backlight: tps65217_bl: Fix Device Tree node lookup backlight: max8925_bl: Fix Device Tree node lookup backlight: as3711_bl: Fix Device Tree node lookup MAINTAINERS: Add dri-devel for backlight subsystem patches backlight: Nuke BL_CORE_DRIVER1 staging: fbtft: Stop using BL_CORE_DRIVER1 backlight: pandora: Stop using BL_CORE_DRIVER1 backlight: generic-bl: Remove DRIVER1 state backlight: Nuke unused backlight.props.state states backlight: otm3225a: Add support for ORISE OTM3225A LCD SoC backlight: pwm_bl: Don't use GPIOF_* with gpiod_get_direction pwm-backlight: Add support for PWM delays proprieties. dt-bindings: pwm-backlight: Add PWM delay proprieties. pwm-backlight: Enable/disable the PWM before/after LCD enable toggle. dt-bindings: backlight: Add binding for RAVE SP backlight driver backlight: Add RAVE SP backlight driver
2018-06-11Merge tag 'mfd-next-4.18' of ↵Linus Torvalds64-994/+1574
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for AXP813 ADC to AXP20x - Add support for PM8005, PM8998 and PMI8998 New Functionality: - Add support for Battery Power Supply to AXP813 - Add support for SYSCON to SPARD SC27XX SPI - Add support for RTC to ChromeOS Embedded-Controller Fix-ups: - Remove unused code; exynos{4,5}-pmu, cros_ec, cros_ec_acpi_gpe - Remove duplicate error messages (-ENOMEM, etc); htc-i2cpld, janz-cmodio, max8997, rc5t583, sm501, smsc-ece1099, abx500-core, si476x-i2c, ti_am335x_tscadc, tps65090, tps6586x, tps65910, tps80031, twl6030-irq, viperboard - Succinctly use ptr to struct in sizeof(); rc5t583, abx500-core, sm501, smsc-ece1099 - Simplify syntax for NULL ptr checking; abx500-core, sm501 - No not unnecessarily initialise variables; tps65910, tps65910 - Reorganise and simplify driver data; omap-usb-tll - Move to SPDX license statement; tps68470 - Probe ADCs via DT; axp20x - Use new GPIOD API; arizona-core - Constify things; axp20x - Reduce code-size (use MACROS, etc); axp20x, omap-usb-host - Add DT support/docs; motorola-cpcap - Remove VLAs; rave-sp - Use devm_* managed resources; cros_ec - Interrogate HW for firmware version; rave-sp - Provide ACPI support for ChromeOS Embedded-Controller Bug Fixes: - Reorder ordered (enum) device list; tps65218 - Only accept valid data from the offset; rave-sp - Refrain from copying junk from failed SPI read; cros_ec_dev - Fix potential memory leaks; pcf50633-core - Fix clock initialisation; twl-core - Fix build-issue; tps65911 - Fix off-by-one error; tps65911 - Fix code ordering issues; intel-lpss - Fix COMPILE_TEST related issues; pwm-stm32 - Fix broken MMC card detection; asic3 - Fix clocking related issues; intel-lpss-pci" * tag 'mfd-next-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: cros_ec: Remove unused __remove function mfd: wm97xx-core: Platform data can be NULL mfd: cros_ec_dev: Don't advertise junk features on failure mfd: cros_ec: Use devm_kzalloc for private data mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock mfd: asic3: Fix broken MMC card detection mfd: timberdale: Fix spelling mistake "Uknown" -> "Unknown" mfd: omap-usb-host: Use match_string() helper mfd: stm32-timers: Fix pwm-stm32 linker issue with COMPILE_TEST pwm: stm32: Initialize raw local variables mfd: arizona: Update DT doc to support more standard Reset binding dt-bindings: mfd: Add bindings for DA9063L mfd: intel-lpss: Correct names of RESETS register bits mfd: qcom-spmi-pmic: Add support for pm8005, pm8998 and pmi8998 mfd: intel-lpss: Program REMAP register in PIO mode mfd: cros_ec_i2c: Moving the system sleep pm ops to late mfd: cros_ec_i2c: Add ACPI module device table mfd: cros_ec_dev: Register shutdown function for debugfs mfd: cros_ec_dev: Register cros-ec-rtc driver as a subdevice mfd: cros_ec: Don't try to grab log when suspended ...
2018-06-11nvmet: free smart-log buffer after useChaitanya Kulkarni1-1/+3
Free smart-log buffer allocated in the function after use. Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-06-11nvme-rdma: fix error flow during mapping request dataMax Gurtovoy1-7/+24
After dma mapping the sgl, we map the sgl to nvme sgl descriptor. In case of failure during the last mapping we never dma unmap the sgl. Signed-off-by: Max Gurtovoy <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-06-11nvme: add bio remapping tracepointHannes Reinecke1-0/+4
Adding a tracepoint to trace bio remapping for native nvme multipath. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-06-11nvme: fix NULL pointer dereference in nvme_init_subsystemIsrael Rukshin1-1/+1
When using nvme-pci driver the nvmf_ctrl_options is NULL. There is no need to check for discovery_nqn flag at non-fabrics controller. Fixes: 181303d0 ("nvme-fabrics: allow duplicate connections to the discovery controller") Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-06-11Merge tag 'drm-next-2018-06-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds29-422/+244
Pull drm msm updates and misc fixes from Dave Airlie: "I looked at Rob's msm tree, he kept it small due to being late, and it was in -next for a while before he was ill, so I think it should be fine. Otherwise this contains a set of i915 fixes and a v3d build fix, and vc4 leak fix" * tag 'drm-next-2018-06-11' of git://anongit.freedesktop.org/drm/drm: (31 commits) drm/i915/icl: Don't update enabled dbuf slices struct until updated in hw drm/i915/icl: fix icl_unmap/map_plls_to_ports drm/i915: Remove bogus NV12 PLANE_COLOR_CTL setup drm/msm: Fix NULL deref on bind/probe deferral drm/msm: Switch to atomic_helper_commit() drm/msm: Remove msm_commit/worker, use atomic helper commit drm/msm: Issue queued events when disabling crtc drm/msm: Move implicit sync handling to prepare_fb drm/msm: Refactor complete_commit() to look more the helpers drm/msm: Don't subclass drm_atomic_state anymore drm/msm/mdp5: Use the new private_obj state drm/msm/mdp5: Add global state as a private atomic object drm/msm: use correct aspace pointer in msm_gem_put_iova() drm/msm: remove unbalanced mutex unlock drm/msm: don't deref error pointer in the msm_fbdev_create error path drm/msm/dsi: use correct enum in dsi_get_cmd_fmt drm/msm: Fix possible null dereference on failure of get_pages() drm/msm: Add modifier to mdp_get_format arguments drm/msm: Mark the crtc->state->event consumed drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY ...
2018-06-11blk-mq: reinit q->tag_set_list entry only after grace periodRoman Pen1-2/+1
It is not allowed to reinit q->tag_set_list list entry while RCU grace period has not completed yet, otherwise the following soft lockup in blk_mq_sched_restart() happens: [ 1064.252652] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [fio:9270] [ 1064.254445] task: ffff99b912e8b900 task.stack: ffffa6d54c758000 [ 1064.254613] RIP: 0010:blk_mq_sched_restart+0x96/0x150 [ 1064.256510] Call Trace: [ 1064.256664] <IRQ> [ 1064.256824] blk_mq_free_request+0xea/0x100 [ 1064.256987] msg_io_conf+0x59/0xd0 [ibnbd_client] [ 1064.257175] complete_rdma_req+0xf2/0x230 [ibtrs_client] [ 1064.257340] ? ibtrs_post_recv_empty+0x4d/0x70 [ibtrs_core] [ 1064.257502] ibtrs_clt_rdma_done+0xd1/0x1e0 [ibtrs_client] [ 1064.257669] ib_create_qp+0x321/0x380 [ib_core] [ 1064.257841] ib_process_cq_direct+0xbd/0x120 [ib_core] [ 1064.258007] irq_poll_softirq+0xb7/0xe0 [ 1064.258165] __do_softirq+0x106/0x2a2 [ 1064.258328] irq_exit+0x92/0xa0 [ 1064.258509] do_IRQ+0x4a/0xd0 [ 1064.258660] common_interrupt+0x7a/0x7a [ 1064.258818] </IRQ> Meanwhile another context frees other queue but with the same set of shared tags: [ 1288.201183] INFO: task bash:5910 blocked for more than 180 seconds. [ 1288.201833] bash D 0 5910 5820 0x00000000 [ 1288.202016] Call Trace: [ 1288.202315] schedule+0x32/0x80 [ 1288.202462] schedule_timeout+0x1e5/0x380 [ 1288.203838] wait_for_completion+0xb0/0x120 [ 1288.204137] __wait_rcu_gp+0x125/0x160 [ 1288.204287] synchronize_sched+0x6e/0x80 [ 1288.204770] blk_mq_free_queue+0x74/0xe0 [ 1288.204922] blk_cleanup_queue+0xc7/0x110 [ 1288.205073] ibnbd_clt_unmap_device+0x1bc/0x280 [ibnbd_client] [ 1288.205389] ibnbd_clt_unmap_dev_store+0x169/0x1f0 [ibnbd_client] [ 1288.205548] kernfs_fop_write+0x109/0x180 [ 1288.206328] vfs_write+0xb3/0x1a0 [ 1288.206476] SyS_write+0x52/0xc0 [ 1288.206624] do_syscall_64+0x68/0x1d0 [ 1288.206774] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 What happened is the following: 1. There are several MQ queues with shared tags. 2. One queue is about to be freed and now task is in blk_mq_del_queue_tag_set(). 3. Other CPU is in blk_mq_sched_restart() and loops over all queues in tag list in order to find hctx to restart. Because linked list entry was modified in blk_mq_del_queue_tag_set() without proper waiting for a grace period, blk_mq_sched_restart() never ends, spining in list_for_each_entry_rcu_rr(), thus soft lockup. Fix is simple: reinit list entry after an RCU grace period elapsed. Fixes: Fixes: 705cda97ee3a ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") Cc: [email protected] Cc: Sagi Grimberg <[email protected]> Cc: [email protected] Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Roman Pen <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-06-11btrfs: scrub: Don't use inode pages for device replaceQu Wenruo1-1/+1
[BUG] Btrfs can create compressed extent without checksum (even though it shouldn't), and if we then try to replace device containing such extent, the result device will contain all the uncompressed data instead of the compressed one. Test case already submitted to fstests: https://patchwork.kernel.org/patch/10442353/ [CAUSE] When handling compressed extent without checksum, device replace will goe into copy_nocow_pages() function. In that function, btrfs will get all inodes referring to this data extents and then use find_or_create_page() to get pages direct from that inode. The problem here is, pages directly from inode are always uncompressed. And for compressed data extent, they mismatch with on-disk data. Thus this leads to corrupted compressed data extent written to replace device. [FIX] In this attempt, we could just remove the "optimization" branch, and let unified scrub_pages() to handle it. Although scrub_pages() won't bother reusing page cache, it will be a little slower, but it does the correct csum checking and won't cause such data corruption caused by "optimization". Note about the fix: this is the minimal fix that can be backported to older stable trees without conflicts. The whole callchain from copy_nocow_pages() can be deleted, and will be in followup patches. Fixes: ff023aac3119 ("Btrfs: add code to scrub to copy read data to another disk") CC: [email protected] # 4.4+ Reported-by: James Harvey <[email protected]> Reviewed-by: James Harvey <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> [ remove code removal, add note why ] Signed-off-by: David Sterba <[email protected]>
2018-06-11ALSA: emu10k1: add error handling for snd_ctl_addZhouyang Jia1-1/+3
When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by: Zhouyang Jia <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-06-11ALSA: fm801: add error handling for snd_ctl_addZhouyang Jia1-4/+12
When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by: Zhouyang Jia <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-06-11Merge branch 'pci/aer-squash'Bjorn Helgaas15-1547/+1434
- squash AER directory into drivers/pci/pcie/aer.c (Bjorn Helgaas) * pci/aer-squash: PCI/AER: Use "PCI Express" consistently in Kconfig text PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/ PCI/AER: Squash Kconfig.debug into Kconfig PCI/AER: Move private AER things to aerdrv.c PCI/AER: Move aer_irq() declaration to portdrv.h PCI/AER: Move pcie_aer_get_firmware_first() to portdrv.h PCI/AER: Remove duplicate pcie_port_bus_type declaration PCI/AER: Squash ecrc.c into aerdrv.c PCI/AER: Squash aerdrv_acpi.c into aerdrv.c PCI/AER: Squash aerdrv_errprint.c into aerdrv.c PCI/AER: Squash aerdrv_core.c into aerdrv.c PCI/AER: Reorder code to group probe/remove stuff together PCI/AER: Remove forward declarations
2018-06-11Merge branch 'pci/renames'Bjorn Helgaas64-79/+75
- collect all native hardware drivers under drivers/pci/controller/ (Shawn Lin) * pci/renames: PCI: Collect all native drivers under drivers/pci/controller/
2018-06-11PCI/AER: Use "PCI Express" consistently in Kconfig textBjorn Helgaas1-6/+6
Use "PCI Express" consistently in Kconfig text. No functional change intended. Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Keith Busch <[email protected]>
2018-06-11PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/Bjorn Helgaas6-56/+41
Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/ so they're next to other PCIe service drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Keith Busch <[email protected]>
2018-06-11PCI/AER: Squash Kconfig.debug into KconfigBjorn Helgaas2-21/+14
Squash Kconfig.debug into Kconfig. No functional change intended. Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Keith Busch <[email protected]>
2018-06-11PCI/AER: Move private AER things to aerdrv.cBjorn Helgaas2-80/+63
Most of the things in aerdrv.h are only used in aerdrv.c, so move them there. No functional change intended. Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Keith Busch <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.