aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-08-31net/rds: RDS is not Radio Data SystemPavel Machek1-1/+1
Getting prompt "The RDS Protocol" (RDS) is not too helpful, and it is easily confused with Radio Data System (which we may want to support in kernel, too). Signed-off-by: Pavel Machek <[email protected]> Acked-by: Sowmini Varadhan <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Sowmini Varadhan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()Dexuan Cui1-1/+10
This patch fixes the race between netvsc_probe() and rndis_set_subchannel(), which can cause a deadlock. These are the related 3 paths which show the deadlock: path #1: Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus] Call Trace: schedule schedule_preempt_disabled __mutex_lock __device_attach bus_probe_device device_add vmbus_device_register vmbus_onoffer vmbus_onmessage_work process_one_work worker_thread kthread ret_from_fork path #2: schedule schedule_preempt_disabled __mutex_lock netvsc_probe vmbus_probe really_probe __driver_attach bus_for_each_dev driver_attach_async async_run_entry_fn process_one_work worker_thread kthread ret_from_fork path #3: Workqueue: events netvsc_subchan_work [hv_netvsc] Call Trace: schedule rndis_set_subchannel netvsc_subchan_work process_one_work worker_thread kthread ret_from_fork Before path #1 finishes, path #2 can start to run, because just before the "bus_probe_device(dev);" in device_add() in path #1, there is a line "object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can immediately try to load hv_netvsc and hence path #2 can start to run. Next, path #2 offloads the subchannal's initialization to a workqueue, i.e. path #3, so we can end up in a deadlock situation like this: Path #2 gets the device lock, and is trying to get the rtnl lock; Path #3 gets the rtnl lock and is waiting for all the subchannel messages to be processed; Path #1 is trying to get the device lock, but since #2 is not releasing the device lock, path #1 has to sleep; since the VMBus messages are processed one by one, this means the sub-channel messages can't be procedded, so #3 has to sleep with the rtnl lock held, and finally #2 has to sleep... Now all the 3 paths are sleeping and we hit the deadlock. With the patch, we can make sure #2 gets both the device lock and the rtnl lock together, gets its job done, and releases the locks, so #1 and #3 will not be blocked for ever. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Dexuan Cui <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: K. Y. Srinivasan <[email protected]> Cc: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31nfp: wait for posted reconfigs when disabling the deviceJakub Kicinski1-15/+33
To avoid leaking a running timer we need to wait for the posted reconfigs after netdev is unregistered. In common case the process of deinitializing the device will perform synchronous reconfigs which wait for posted requests, but especially with VXLAN ports being actively added and removed there can be a race condition leaving a timer running after adapter structure is freed leading to a crash. Add an explicit flush after deregistering and for a good measure a warning to check if timer is running just before structures are freed. Fixes: 3d780b926a12 ("nfp: add async reconfiguration mechanism") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31Revert "packet: switch kvzalloc to allocate memory"Eric Dumazet2-13/+32
This reverts commit 71e41286203c017d24f041a7cd71abea7ca7b1e0. mmap()/munmap() can not be backed by kmalloced pages : We fault in : VM_BUG_ON_PAGE(PageSlab(page), page); unmap_single_vma+0x8a/0x110 unmap_vmas+0x4b/0x90 unmap_region+0xc9/0x140 do_munmap+0x274/0x360 vm_munmap+0x81/0xc0 SyS_munmap+0x2b/0x40 do_syscall_64+0x13e/0x1c0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 71e41286203c ("packet: switch kvzalloc to allocate memory") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: John Sperbeck <[email protected]> Bisected-by: John Sperbeck <[email protected]> Cc: Zhang Yu <[email protected]> Cc: Li RongQing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31md-cluster: release RESYNC lock after the last resync messageGuoqing Jiang1-5/+5
All the RESYNC messages are sent with resync lock held, the only exception is resync_finish which releases resync_lockres before send the last resync message, this should be changed as well. Otherwise, we can see deadlock issue as follows: clustermd2-gqjiang2:~ # cat /proc/mdstat Personalities : [raid10] [raid1] md0 : active raid1 sdg[0] sdf[1] 134144 blocks super 1.2 [2/2] [UU] [===================>.] resync = 99.6% (134144/134144) finish=0.0min speed=26K/sec bitmap: 1/1 pages [4KB], 65536KB chunk unused devices: <none> clustermd2-gqjiang2:~ # ps aux|grep md|grep D root 20497 0.0 0.0 0 0 ? D 16:00 0:00 [md0_raid1] clustermd2-gqjiang2:~ # cat /proc/20497/stack [<ffffffffc05ff51e>] dlm_lock_sync+0x8e/0xc0 [md_cluster] [<ffffffffc05ff7e8>] __sendmsg+0x98/0x130 [md_cluster] [<ffffffffc05ff900>] sendmsg+0x20/0x30 [md_cluster] [<ffffffffc05ffc35>] resync_info_update+0xb5/0xc0 [md_cluster] [<ffffffffc0593e84>] md_reap_sync_thread+0x134/0x170 [md_mod] [<ffffffffc059514c>] md_check_recovery+0x28c/0x510 [md_mod] [<ffffffffc060c882>] raid1d+0x42/0x800 [raid1] [<ffffffffc058ab61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9a0a5b3f>] kthread+0xff/0x140 [<ffffffff9a800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff clustermd-gqjiang1:~ # ps aux|grep md|grep D root 20531 0.0 0.0 0 0 ? D 16:00 0:00 [md0_raid1] root 20537 0.0 0.0 0 0 ? D 16:00 0:00 [md0_cluster_rec] root 20676 0.0 0.0 0 0 ? D 16:01 0:00 [md0_resync] clustermd-gqjiang1:~ # cat /proc/mdstat Personalities : [raid10] [raid1] md0 : active raid1 sdf[1] sdg[0] 134144 blocks super 1.2 [2/2] [UU] [===================>.] resync = 97.3% (131072/134144) finish=8076.8min speed=0K/sec bitmap: 1/1 pages [4KB], 65536KB chunk unused devices: <none> clustermd-gqjiang1:~ # cat /proc/20531/stack [<ffffffffc080974d>] metadata_update_start+0xcd/0xd0 [md_cluster] [<ffffffffc079c897>] md_update_sb.part.61+0x97/0x820 [md_mod] [<ffffffffc079f15b>] md_check_recovery+0x29b/0x510 [md_mod] [<ffffffffc0816882>] raid1d+0x42/0x800 [raid1] [<ffffffffc0794b61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9e0a5b3f>] kthread+0xff/0x140 [<ffffffff9e800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff clustermd-gqjiang1:~ # cat /proc/20537/stack [<ffffffffc0813222>] freeze_array+0xf2/0x140 [raid1] [<ffffffffc080a56e>] recv_daemon+0x41e/0x580 [md_cluster] [<ffffffffc0794b61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9e0a5b3f>] kthread+0xff/0x140 [<ffffffff9e800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff clustermd-gqjiang1:~ # cat /proc/20676/stack [<ffffffffc080951e>] dlm_lock_sync+0x8e/0xc0 [md_cluster] [<ffffffffc080957f>] lock_token+0x2f/0xa0 [md_cluster] [<ffffffffc0809622>] lock_comm+0x32/0x90 [md_cluster] [<ffffffffc08098f5>] sendmsg+0x15/0x30 [md_cluster] [<ffffffffc0809c0a>] resync_info_update+0x8a/0xc0 [md_cluster] [<ffffffffc08130ba>] raid1_sync_request+0xa9a/0xb10 [raid1] [<ffffffffc079b8ea>] md_do_sync+0xbaa/0xf90 [md_mod] [<ffffffffc0794b61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9e0a5b3f>] kthread+0xff/0x140 [<ffffffff9e800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Reviewed-by: NeilBrown <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
2018-08-31RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0Xiao Ni1-1/+4
In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by: Xiao Ni <[email protected]> Suggested-by: Neil Brown <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
2018-08-31md/raid5-cache: disable reshape completelyShaohua Li2-3/+8
We don't support reshape yet if an array supports log device. Previously we determine the fact by checking ->log. However, ->log could be NULL after a log device is removed, but the array is still marked to support log device. Don't allow reshape in this case too. User can disable log device support by setting 'consistency_policy' to 'resync' then do reshape. Reported-by: Xiao Ni <[email protected]> Tested-by: Xiao Ni <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
2018-08-31blkcg: use tryget logic when associating a blkg with a bioDennis Zhou (Facebook)2-3/+5
There is a very small change a bio gets caught up in a really unfortunate race between a task migration, cgroup exiting, and itself trying to associate with a blkg. This is due to css offlining being performed after the css->refcnt is killed which triggers removal of blkgs that reach their blkg->refcnt of 0. To avoid this, association with a blkg should use tryget and fallback to using the root_blkg. Fixes: 08e18eab0c579 ("block: add bi_blkg to the bio for cgroups") Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Dennis Zhou <[email protected]> Cc: Jiufei Xue <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Josef Bacik <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-08-31blkcg: delay blkg destruction until after writeback has finishedDennis Zhou (Facebook)3-8/+94
Currently, blkcg destruction relies on a sequence of events: 1. Destruction starts. blkcg_css_offline() is called and blkgs release their reference to the blkcg. This immediately destroys the cgwbs (writeback). 2. With blkgs giving up their reference, the blkcg ref count should become zero and eventually call blkcg_css_free() which finally frees the blkcg. Jiufei Xue reported that there is a race between blkcg_bio_issue_check() and cgroup_rmdir(). To remedy this, blkg destruction becomes contingent on the completion of all writeback associated with the blkcg. A count of the number of cgwbs is maintained and once that goes to zero, blkg destruction can follow. This should prevent premature blkg destruction related to writeback. The new process for blkcg cleanup is as follows: 1. Destruction starts. blkcg_css_offline() is called which offlines writeback. Blkg destruction is delayed on the cgwb_refcnt count to avoid punting potentially large amounts of outstanding writeback to root while maintaining any ongoing policies. Here, the base cgwb_refcnt is put back. 2. When the cgwb_refcnt becomes zero, blkcg_destroy_blkgs() is called and handles destruction of blkgs. This is where the css reference held by each blkg is released. 3. Once the blkcg ref count goes to zero, blkcg_css_free() is called. This finally frees the blkg. It seems in the past blk-throttle didn't do the most understandable things with taking data from a blkg while associating with current. So, the simplification and unification of what blk-throttle is doing caused this. Fixes: 08e18eab0c579 ("block: add bi_blkg to the bio for cgroups") Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Dennis Zhou <[email protected]> Cc: Jiufei Xue <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Josef Bacik <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-08-31Revert "blk-throttle: fix race between blkcg_bio_issue_check() and ↵Dennis Zhou (Facebook)2-63/+16
cgroup_rmdir()" This reverts commit 4c6994806f708559c2812b73501406e21ae5dcd0. Destroying blkgs is tricky because of the nature of the relationship. A blkg should go away when either a blkcg or a request_queue goes away. However, blkg's pin the blkcg to ensure they remain valid. To break this cycle, when a blkcg is offlined, blkgs put back their css ref. This eventually lets css_free() get called which frees the blkcg. The above commit (4c6994806f70) breaks this order of events by trying to destroy blkgs in css_free(). As the blkgs still hold references to the blkcg, css_free() is never called. The race between blkcg_bio_issue_check() and cgroup_rmdir() will be addressed in the following patch by delaying destruction of a blkg until all writeback associated with the blkcg has been finished. Fixes: 4c6994806f70 ("blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()") Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Dennis Zhou <[email protected]> Cc: Jiufei Xue <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-08-31ARC: dma [IOC]: mark DMA devices connected as dma-coherentEugeniy Paltsev3-0/+56
Mark DMA devices on AXS103 and HSDK boards connected through IOC port as dma-coherent. Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2018-08-31ipmi: Fix NULL pointer dereference in ssif_probeGustavo A. R. Silva1-1/+3
There is a potential execution path in which function ssif_info_find() returns NULL, hence there is a NULL pointer dereference when accessing pointer *addr_info* Fix this by null checking *addr_info* before dereferencing it. Addresses-Coverity-ID: 1473145 ("Explicit null dereferenced") Fixes: e333054a91d1 ("ipmi: Fix I2C client removal in the SSIF driver") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2018-08-31ARC: atomics: unbork atomic_fetch_##op()Will Deacon1-1/+1
In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK | INFO: task syslogd:77 blocked for more than 10 seconds. | Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40 | "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this | message. | syslogd D 0 77 76 0x00000000 | | Stack Trace: | __switch_to+0x0/0xac | __schedule+0x1b2/0x730 | io_schedule+0x5c/0xc0 | __lock_page+0x98/0xdc | find_lock_entry+0x38/0x100 | shmem_getpage_gfp.isra.3+0x82/0xbfc | shmem_fault+0x46/0x138 | handle_mm_fault+0x5bc/0x924 | do_page_fault+0x100/0x2b8 | ret_from_exception+0x0/0x8 He bisected to 84c6591103db ("locking/atomics, asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()") This commit however only unmasked the real issue introduced by commit 4aef66c8ae9 ("locking/atomic, arch/arc: Fix build") which missed the retry-if-scond-failed branch in atomic_fetch_##op() macros. The bisected commit started using atomic_fetch_##op() macros for building the rest of atomics. Fixes: 4aef66c8ae9 ("locking/atomic, arch/arc: Fix build") Reported-by: Eugeniy Paltsev <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Vineet Gupta <[email protected]> [vgupta: wrote changelog]
2018-08-31MIPS: VDSO: Match data page cache colouring when D$ aliasesPaul Burton1-0/+20
When a system suffers from dcache aliasing a user program may observe stale VDSO data from an aliased cache line. Notably this can break the expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name suggests, monotonic. In order to ensure that users observe updates to the VDSO data page as intended, align the user mappings of the VDSO data page such that their cache colouring matches that of the virtual address range which the kernel will use to update the data page - typically its unmapped address within kseg0. This ensures that we don't introduce aliasing cache lines for the VDSO data page, and therefore that userland will observe updates without requiring cache invalidation. Signed-off-by: Paul Burton <[email protected]> Reported-by: Hauke Mehrtens <[email protected]> Reported-by: Rene Nielsen <[email protected]> Reported-by: Alexandre Belloni <[email protected]> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Patchwork: https://patchwork.linux-mips.org/patch/20344/ Tested-by: Alexandre Belloni <[email protected]> Tested-by: Hauke Mehrtens <[email protected]> Cc: James Hogan <[email protected]> Cc: [email protected] Cc: [email protected] # v4.4+
2018-08-31netfilter: nf_tables: release chain in flushing setTaehee Yoo1-0/+1
When element of verdict map is deleted, the delete routine should release chain. however, flush element of verdict map routine doesn't release chain. test commands: %nft add table ip filter %nft add chain ip filter c1 %nft add map ip filter map1 { type ipv4_addr : verdict \; } %nft add element ip filter map1 { 1 : jump c1 } %nft flush map ip filter map1 %nft flush ruleset splat looks like: [ 4895.170899] kernel BUG at net/netfilter/nf_tables_api.c:1415! [ 4895.178114] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 4895.178880] CPU: 0 PID: 1670 Comm: nft Not tainted 4.18.0+ #55 [ 4895.178880] RIP: 0010:nf_tables_chain_destroy.isra.28+0x39/0x220 [nf_tables] [ 4895.178880] Code: fc ff df 53 48 89 fb 48 83 c7 50 48 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 09 3c 03 7f 05 e8 3e 4c 25 e1 8b 43 50 85 c0 74 02 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 [ 4895.228342] RSP: 0018:ffff88010b98f4c0 EFLAGS: 00010202 [ 4895.234841] RAX: 0000000000000001 RBX: ffff8801131c6968 RCX: ffff8801146585b0 [ 4895.234841] RDX: 1ffff10022638d37 RSI: ffff8801191a9348 RDI: ffff8801131c69b8 [ 4895.234841] RBP: ffff8801146585a8 R08: 1ffff1002323526a R09: 0000000000000000 [ 4895.234841] R10: 0000000000000000 R11: 0000000000000000 R12: dead000000000200 [ 4895.234841] R13: dead000000000100 R14: ffffffffa3638af8 R15: dffffc0000000000 [ 4895.234841] FS: 00007f6d188e6700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000 [ 4895.234841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4895.234841] CR2: 00007ffe72b8df88 CR3: 000000010e2d4000 CR4: 00000000001006f0 [ 4895.234841] Call Trace: [ 4895.234841] nf_tables_commit+0x2704/0x2c70 [nf_tables] [ 4895.234841] ? nfnetlink_rcv_batch+0xa4f/0x11b0 [nfnetlink] [ 4895.234841] ? nf_tables_setelem_notify.constprop.48+0x1a0/0x1a0 [nf_tables] [ 4895.323824] ? __lock_is_held+0x9d/0x130 [ 4895.323824] ? kasan_unpoison_shadow+0x30/0x40 [ 4895.333299] ? kasan_kmalloc+0xa9/0xc0 [ 4895.333299] ? kmem_cache_alloc_trace+0x2c0/0x310 [ 4895.333299] ? nfnetlink_rcv_batch+0xa4f/0x11b0 [nfnetlink] [ 4895.333299] nfnetlink_rcv_batch+0xdb9/0x11b0 [nfnetlink] [ 4895.333299] ? debug_show_all_locks+0x290/0x290 [ 4895.333299] ? nfnetlink_net_init+0x150/0x150 [nfnetlink] [ 4895.333299] ? sched_clock_cpu+0xe5/0x170 [ 4895.333299] ? sched_clock_local+0xff/0x130 [ 4895.333299] ? sched_clock_cpu+0xe5/0x170 [ 4895.333299] ? find_held_lock+0x39/0x1b0 [ 4895.333299] ? sched_clock_local+0xff/0x130 [ 4895.333299] ? memset+0x1f/0x40 [ 4895.333299] ? nla_parse+0x33/0x260 [ 4895.333299] ? ns_capable_common+0x6e/0x110 [ 4895.333299] nfnetlink_rcv+0x2c0/0x310 [nfnetlink] [ ... ] Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-08-31netfilter: kconfig: nat related expression depend on nftables coreFlorian Westphal1-3/+5
NF_TABLES_IPV4 is now boolean so it is possible to set NF_TABLES=m NF_TABLES_IPV4=y NFT_CHAIN_NAT_IPV4=y which causes: nft_chain_nat_ipv4.c:(.text+0x6d): undefined reference to `nft_do_chain' Wrap NFT_CHAIN_NAT_IPV4 and related nat expressions with NF_TABLES to restore the dependency. Reported-by: Randy Dunlap <[email protected]> Fixes: 02c7b25e5f54 ("netfilter: nf_tables: build-in filter chain type") Signed-off-by: Florian Westphal <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-09-01kconfig: remove a spurious self-assignmentLukas Bulwahn1-1/+0
The self assignment was probably introduced by an automated code refactoring in commit 694c49a7c01c ("kconfig: drop localization support"). The issue was identified by a self-assign warning when running make menuconfig with clang. Fixes: 694c49a7c01c ("kconfig: drop localization support") Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-09-01scripts/setlocalversion: git: Make -dirty check more robustGenki Sky1-1/+1
$(git diff-index) relies on the index being refreshed. This refreshing of the index used to happen, but was removed in cdf2bc632ebc ("scripts/setlocalversion on write-protected source tree", 2013-06-14) due to issues with a read-only filesystem. If the index is not refreshed, one runs into problems. E.g. as described in [0], git stores the uid in its index, so even if just the uid has changed (or git is tricked into thinking so), then we will think the tree is dirty. So as in [1], if you package linux-git with a system that uses fakeroot(1), you get a "-dirty" version. Unless you manually $(git update-index --refresh) themselves. The simplest solution seems to be $(git status --porcelain), with an additional flag saying "ignore untracked files". It seems clearer about what it does, and avoids issues regarding cached indexes and writable filesystems, but still has stable output for scripting. [0]: https://public-inbox.org/git/[email protected]/ [1]: https://bbs.archlinux.org/viewtopic.php?id=236702 Signed-off-by: Genki Sky <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-08-31Merge tag 'arm64-fixes' of ↵Linus Torvalds3-17/+26
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A few arm64 fixes came in this week, specifically fixing some nasty truncation of return values from firmware calls and resolving a VM_BUG_ON due to accessing uninitialised struct pages corresponding to NOMAP pages. Summary: - Fix typos in SVE documentation - Fix type-checking and implicit truncation for SMCCC calls - Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP regions" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: always enable CONFIG_HOLES_IN_ZONE arm/arm64: smccc-1.1: Handle function result as parameters arm/arm64: smccc-1.1: Make return values unsigned long Documentation/arm64/sve: Couple of improvements and typos
2018-08-31x86/efi: Load fixmap GDT in efi_call_phys_epilog()Joerg Roedel1-6/+2
When PTI is enabled on x86-32 the kernel uses the GDT mapped in the fixmap for the simple reason that this address is also mapped for user-space. The efi_call_phys_prolog()/efi_call_phys_epilog() wrappers change the GDT to call EFI runtime services and switch back to the kernel GDT when they return. But the switch-back uses the writable GDT, not the fixmap GDT. When that happened and and the CPU returns to user-space it switches to the user %cr3 and tries to restore user segment registers. This fails because the writable GDT is not mapped in the user page-table, and without a GDT the fault handlers also can't be launched. The result is a triple fault and reboot of the machine. Fix that by restoring the GDT back to the fixmap GDT which is also mapped in the user page-table. Fixes: 7757d607c6b3 x86/pti: ('Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32') Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Guenter Roeck <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Pavel Machek <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-31Merge tag 'for-linus-4.19b-rc2-tag' of ↵Linus Torvalds4-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - minor cleanup avoiding a warning when building with new gcc - a patch to add a new sysfs node for Xen frontend/backend drivers to make it easier to obtain the state of a pv device - two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable PTEs * tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove redundant variable save_pud xen: export device state to sysfs x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear x86/xen: don't write ptes directly in 32-bit PV guests
2018-08-31Merge tag 'm68k-for-v4.19-tag2' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Just a single fix for a bug introduced during the merge window: fix wrong date and time on PMU-based Macs" * tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Use correct PMU response format
2018-08-31Merge branch 'i2c/for-current' of ↵Linus Torvalds8-44/+66
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - regression fixes for i801 and designware - better API and leak fix for releasing DMA safe buffers - better greppable strings for the bitbang algorithm * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sh_mobile: fix leak when using DMA bounce buffer i2c: sh_mobile: define start_ch() void as it only returns 0 anyhow i2c: refactor function to release a DMA safe buffer i2c: algos: bit: make the error messages grepable i2c: designware: Re-init controllers with pm_disabled set on resume i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
2018-08-31x86/nmi: Fix NMI uaccess race against CR3 switchingAndy Lutomirski4-1/+53
A NMI can hit in the middle of context switching or in the middle of switch_mm_irqs_off(). In either case, CR3 might not match current->mm, which could cause copy_from_user_nmi() and friends to read the wrong memory. Fix it by adding a new nmi_uaccess_okay() helper and checking it in copy_from_user_nmi() and in __copy_from_user_nmi()'s callers. Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Nadav Amit <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jann Horn <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
2018-08-31x86: Allow generating user-space headers without a compilerBen Hutchings1-4/+7
When bootstrapping an architecture, it's usual to generate the kernel's user-space headers (make headers_install) before building a compiler. Move the compiler check (for asm goto support) to the archprepare target so that it is only done when building code for the target. Fixes: e501ce957a78 ("x86: Force asm-goto") Reported-by: Helmut Grohne <[email protected]> Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-31x86/dumpstack: Don't dump kernel memory based on usermode RIPJann Horn3-5/+15
show_opcodes() is used both for dumping kernel instructions and for dumping user instructions. If userspace causes #PF by jumping to a kernel address, show_opcodes() can be reached with regs->ip controlled by the user, pointing to kernel code. Make sure that userspace can't trick us into dumping kernel memory into dmesg. Fixes: 7cccf0725cf7 ("x86/dumpstack: Add a show_ip() function") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-08-31ipmi: Fix I2C client removal in the SSIF driverCorey Minyard1-11/+6
The SSIF driver was removing any client that came in through the platform interface, but it should only remove clients that it added. On a failure in the probe function, this could result in the following oops when the driver is removed and the client gets unregistered twice: CPU: 107 PID: 30266 Comm: rmmod Not tainted 4.18.0+ #80 Hardware name: Cavium Inc. Saber/Saber, BIOS Cavium reference firmware version 7.0 08/04/2018 pstate: 60400009 (nZCv daif +PAN -UAO) pc : kernfs_find_ns+0x28/0x120 lr : kernfs_find_and_get_ns+0x40/0x60 sp : ffff00002310fb50 x29: ffff00002310fb50 x28: ffff800a8240f800 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000056000000 x24: ffff000009073000 x23: ffff000008998b38 x22: 0000000000000000 x21: ffff800ed86de820 x20: 0000000000000000 x19: ffff00000913a1d8 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 5300737265766972 x13: 643d4d4554535953 x12: 0000000000000030 x11: 0000000000000030 x10: 0101010101010101 x9 : ffff800ea06cc3f9 x8 : 0000000000000000 x7 : 0000000000000141 x6 : ffff000009073000 x5 : ffff800adb706b00 x4 : 0000000000000000 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : ffff000008998b38 x0 : ffff000008356760 Process rmmod (pid: 30266, stack limit = 0x00000000e218418d) Call trace: kernfs_find_ns+0x28/0x120 kernfs_find_and_get_ns+0x40/0x60 sysfs_unmerge_group+0x2c/0x6c dpm_sysfs_remove+0x34/0x70 device_del+0x58/0x30c device_unregister+0x30/0x7c i2c_unregister_device+0x84/0x90 [i2c_core] ssif_platform_remove+0x38/0x98 [ipmi_ssif] platform_drv_remove+0x2c/0x6c device_release_driver_internal+0x168/0x1f8 driver_detach+0x50/0xbc bus_remove_driver+0x74/0xe8 driver_unregister+0x34/0x5c platform_driver_unregister+0x20/0x2c cleanup_ipmi_ssif+0x50/0xd82c [ipmi_ssif] __arm64_sys_delete_module+0x1b4/0x220 el0_svc_handler+0x104/0x160 el0_svc+0x8/0xc Code: aa1e03e0 aa0203f6 aa0103f7 d503201f (7940e280) ---[ end trace 09f0e34cce8e2d8c ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x23800c38 So track the clients that the SSIF driver adds and only remove those. Reported-by: George Cherian <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Tested-by: George Cherian <[email protected]> Cc: <[email protected]> # 4.14.x
2018-08-31ipmi: Move BT capabilities detection to the detect callCorey Minyard1-44/+48
The capabilities detection was being done as part of the normal state machine, but it was possible for it to be running while the upper layers of the IPMI driver were initializing the device, resulting in error and failure to initialize. Move the capabilities detection to the the detect function, so it's done before anything else runs on the device. This also simplifies the state machine and removes some code, as a bonus. Signed-off-by: Corey Minyard <[email protected]> Reported-by: Andrew Banman <[email protected]> Tested-by: Andrew Banman <[email protected]> Cc: <[email protected]>
2018-08-31ipmi: Rework SMI registration failureCorey Minyard3-46/+37
There were certain situations where ipmi_register_smi() would return a failure, but the interface would still be registered and would need to be unregistered. This is obviously a bad design and resulted in an oops in certain failure cases. If the interface is started up in ipmi_register_smi(), then an error occurs, shut down the interface there so the cleanup can be done properly. Fix the various smi users, too. Signed-off-by: Corey Minyard <[email protected]> Reported-by: Justin Ernst <[email protected]> Tested-by: Justin Ernst <[email protected]> Cc: Andrew Banman <[email protected]> Cc: Russ Anderson <[email protected]> Cc: <[email protected]> # 4.18.x
2018-08-31of: Add device_type access helper functionsRob Herring1-0/+12
In preparation to remove direct access to device_node.type, add of_node_is_type() and of_node_get_device_type() helpers to check and retrieve the device type. Cc: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-08-31cpu/hotplug: Remove skip_onerr field from cpuhp_step structureMukesh Ojha1-22/+4
When notifiers were there, `skip_onerr` was used to avoid calling particular step startup/teardown callbacks in the CPU up/down rollback path, which made the hotplug asymmetric. As notifiers are gone now after the full state machine conversion, the `skip_onerr` field is no longer required. Remove it from the structure and its usage. Signed-off-by: Mukesh Ojha <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-08-31arm64: mm: always enable CONFIG_HOLES_IN_ZONEJames Morse1-1/+0
Commit 6d526ee26ccd ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA") only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was choking on the missing zone for nomap pages. This problem doesn't just apply to NUMA systems. If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will return true if the pfn is part of a valid sparsemem section. When working with multiple pages, the mm code uses pfn_valid_within() to test each page it uses within the sparsemem section is valid. On most systems memory comes in MAX_ORDER_NR_PAGES chunks which all have valid/initialised struct pages. In this case pfn_valid_within() is optimised out. Systems where this isn't true (e.g. due to nomap) should set HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each page as it works with it. Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to a VM_BUG_ON(): | page:fffffdff802e1780 is uninitialized and poisoned | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:978! | Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] | CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 40000085 (nZcv daIf -PAN -UAO) | pc : move_freepages_block+0x144/0x248 | lr : move_freepages_block+0x144/0x248 | sp : fffffe0071177680 [...] | Process dd (pid: 25236, stack limit = 0x0000000094cc07fb) | Call trace: | move_freepages_block+0x144/0x248 | steal_suitable_fallback+0x100/0x16c | get_page_from_freelist+0x440/0xb20 | __alloc_pages_nodemask+0xe8/0x838 | new_slab+0xd4/0x418 | ___slab_alloc.constprop.27+0x380/0x4a8 | __slab_alloc.isra.21.constprop.26+0x24/0x34 | kmem_cache_alloc+0xa8/0x180 | alloc_buffer_head+0x1c/0x90 | alloc_page_buffers+0x68/0xb0 | create_empty_buffers+0x20/0x1ec | create_page_buffers+0xb0/0xf0 | __block_write_begin_int+0xc4/0x564 | __block_write_begin+0x10/0x18 | block_write_begin+0x48/0xd0 | blkdev_write_begin+0x28/0x30 | generic_perform_write+0x98/0x16c | __generic_file_write_iter+0x138/0x168 | blkdev_write_iter+0x80/0xf0 | __vfs_write+0xe4/0x10c | vfs_write+0xb4/0x168 | ksys_write+0x44/0x88 | sys_write+0xc/0x14 | el0_svc_naked+0x30/0x34 | Code: aa1303e0 90001a01 91296421 94008902 (d4210000) | ---[ end trace 1601ba47f6e883fe ]--- Remove the NUMA dependency. Link: https://www.spinics.net/lists/arm-kernel/msg671851.html Cc: <[email protected]> Cc: Ard Biesheuvel <[email protected]> Reported-by: Mikulas Patocka <[email protected]> Reviewed-by: Pavel Tatashin <[email protected]> Tested-by: Mikulas Patocka <[email protected]> Signed-off-by: James Morse <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-08-31gpio: Fix crash due to registration raceVincent Whitchurch1-0/+1
gpiochip_add_data_with_key() adds the gpiochip to the gpio_devices list before of_gpiochip_add() is called, but it's only the latter which sets the ->of_xlate function pointer. gpiochip_find() can be called by someone else between these two actions, and it can find the chip and call of_gpiochip_match_node_and_xlate() which leads to the following crash due to a NULL ->of_xlate(). Unhandled prefetch abort: page domain fault (0x01b) at 0x00000000 Modules linked in: leds_gpio(+) gpio_generic(+) CPU: 0 PID: 830 Comm: insmod Not tainted 4.18.0+ #43 Hardware name: ARM-Versatile Express PC is at (null) LR is at of_gpiochip_match_node_and_xlate+0x2c/0x38 Process insmod (pid: 830, stack limit = 0x(ptrval)) (of_gpiochip_match_node_and_xlate) from (gpiochip_find+0x48/0x84) (gpiochip_find) from (of_get_named_gpiod_flags+0xa8/0x238) (of_get_named_gpiod_flags) from (gpiod_get_from_of_node+0x2c/0xc8) (gpiod_get_from_of_node) from (devm_fwnode_get_index_gpiod_from_child+0xb8/0x144) (devm_fwnode_get_index_gpiod_from_child) from (gpio_led_probe+0x208/0x3c4 [leds_gpio]) (gpio_led_probe [leds_gpio]) from (platform_drv_probe+0x48/0x9c) (platform_drv_probe) from (really_probe+0x1d0/0x3d4) (really_probe) from (driver_probe_device+0x78/0x1c0) (driver_probe_device) from (__driver_attach+0x120/0x13c) (__driver_attach) from (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from (bus_add_driver+0x1a8/0x268) (bus_add_driver) from (driver_register+0x78/0x10c) (driver_register) from (do_one_initcall+0x54/0x1fc) (do_one_initcall) from (do_init_module+0x64/0x1f4) (do_init_module) from (load_module+0x2198/0x26ac) (load_module) from (sys_finit_module+0xe0/0x110) (sys_finit_module) from (ret_fast_syscall+0x0/0x54) One way to fix this would be to rework the hairy registration sequence in gpiochip_add_data_with_key(), but since I'd probably introduce a couple of new bugs if I attempted that, simply add a check for a non-NULL of_xlate function pointer in of_gpiochip_match_node_and_xlate(). This works since the driver looking for the gpio will simply fail to find the gpio and defer its probe and be reprobed when the driver which is registering the gpiochip has fully completed its probe. Signed-off-by: Vincent Whitchurch <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-08-31m68k/mac: Use correct PMU response formatFinn Thain1-6/+4
Now that the 68k Mac port has adopted the via-pmu driver, it must decode the PMU response accordingly otherwise the date and time will be wrong. Fixes: ebd722275f9cfc67 ("macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driver") Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2018-08-30Merge tag 'drm-fixes-2018-08-31' of git://anongit.freedesktop.org/drm/drmLinus Torvalds26-161/+303
Pull drm fixes from Dave Airlie: "Regular fixes pull: - Mediatek has a bunch of fixes to their RDMA and Overlay engines. - i915 has some Cannonlake/Geminilake watermark workarounds, LSPCON fix, HDCP free fix, audio fix and a ppgtt reference counting fix. - amdgpu has some SRIOV, Kasan, memory leaks and other misc fixes" * tag 'drm-fixes-2018-08-31' of git://anongit.freedesktop.org/drm/drm: (35 commits) drm/i915/audio: Hook up component bindings even if displays are disabled drm/i915: Increase LSPCON timeout drm/i915: Stop holding a ref to the ppgtt from each vma drm/i915: Free write_buf that we allocated with kzalloc. drm/i915: Fix glk/cnl display w/a #1175 drm/amdgpu: Need to set moved to true when evict bo drm/amdgpu: Remove duplicated power source update drm/amd/display: Fix memory leak caused by missed dc_sink_release drm/amdgpu: fix holding mn_lock while allocating memory drm/amdgpu: Power on uvd block when hw_fini drm/amdgpu: Update power state at the end of smu hw_init. drm/amdgpu: Fix vce initialize failed on Kaveri/Mullins drm/amdgpu: Enable/disable gfx PG feature in rlc safe mode drm/amdgpu: Adjust the VM size based on system memory size v2 drm/mediatek: fix connection from RDMA2 to DSI1 drm/mediatek: update some variable name from ovl to comp drm/mediatek: use layer_nr function to get layer number to init plane drm/mediatek: add function to return RDMA layer number drm/mediatek: add function to return OVL layer number drm/mediatek: add function to get layer number for component ...
2018-08-30disable stringop truncation warnings for nowStephen Rothwell1-0/+3
They are too noisy Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-08-30Merge tag 'pm-4.19-rc2' of ↵Linus Torvalds2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address a corner case in the menu cpuidle governor and fix error handling in the PM core's generic clock management code. Specifics: - Make the menu cpuidle governor avoid stopping the scheduler tick if the predicted idle duration exceeds the tick period length, but the selected idle state is shallow and deeper idle states with high target residencies are available (Rafael Wysocki). - Make the PM core's generic clock management code use a proper data type for one variable to make error handling work (Dan Carpenter)" * tag 'pm-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: menu: Retain tick when shallow state is selected PM / clk: signedness bug in of_pm_clk_add_clks()
2018-08-30arc: remove redundant GCC version checksMasahiro Yamada1-9/+1
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") bumped the minimum GCC version to 4.6 for all architectures. With GCC >= 4.6 assumed, 'upto_gcc44' is empty, 'atleast_gcc44' is y. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2018-08-31Merge branch 'pm-core'Rafael J. Wysocki1-1/+1
Merge a generic clock management fix for 4.19-rc2. * pm-core: PM / clk: signedness bug in of_pm_clk_add_clks()
2018-08-30clk: x86: Set default parent to 48MhzAkshu Agrawal1-1/+1
System clk provided in ST soc can be set to: 48Mhz, non-spread 25Mhz, spread To get accurate rate, we need it to set it at non-spread option which is 48Mhz. Signed-off-by: Akshu Agrawal <[email protected]> Reviewed-by: Daniel Kurtz <[email protected]> Fixes: 421bf6a1f061 ("clk: x86: Add ST oscout platform clock") Signed-off-by: Stephen Boyd <[email protected]>
2018-08-30i2c: sh_mobile: fix leak when using DMA bounce bufferWolfram Sang1-2/+4
We only freed the bounce buffer after successful DMA, missing the cases where DMA setup may have gone wrong. Use a better location which always gets called after each message and use 'stop_after_dma' as a flag for a successful transfer. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: sh_mobile: define start_ch() void as it only returns 0 anyhowWolfram Sang1-6/+3
After various refactoring over the years, start_ch() doesn't return errno anymore, so make the function return void. This saves the error handling when calling it which in turn eases cleanup of resources of a future patch. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: refactor function to release a DMA safe bufferWolfram Sang4-10/+15
a) rename to 'put' instead of 'release' to match 'get' when obtaining the buffer b) change the argument order to have the buffer as first argument c) add a new argument telling the function if the message was transferred. This allows the function to be used also in cases where setting up DMA failed, so the buffer needs to be freed without syncing to the message buffer. Also convert the only user. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: algos: bit: make the error messages grepableJan Kundrát1-24/+31
Yep, I went looking for one of these, and I wasn't able to find it easily. That's worse than a line which is 82-chars long, IMHO. Signed-off-by: Jan Kundrát <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: designware: Re-init controllers with pm_disabled set on resumeHans de Goede2-2/+6
On Bay Trail and Cherry Trail devices we set the pm_disabled flag for I2C busses which the OS shares with the PUNIT as these need special handling. Until now we called dev_pm_syscore_device(dev, true) for I2C controllers with this flag set to keep these I2C controllers always on. After commit 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation"), this no longer works. This commit modifies lpss_iosf_exit_d3_state() to only run if lpss_iosf_enter_d3_state() has ran before it, so that it does not run on a resume from hibernate (or from S3). On these systems the conditions for lpss_iosf_enter_d3_state() to run never become true, so lpss_iosf_exit_d3_state() never gets called and the 2 LPSS DMA controllers never get forced into D0 mode, instead they are left in their default automatic power-on when needed mode. The not forcing of D0 mode for the DMA controllers enables these systems to properly enter S0ix modes, which is a good thing. But after entering S0ix modes the I2C controller connected to the PMIC no longer works, leading to e.g. broken battery monitoring. The _PS3 method for this I2C controller looks like this: Method (_PS3, 0, NotSerialized) // _PS3: Power State 3 { If ((((PMID == 0x04) || (PMID == 0x05)) || (PMID == 0x06))) { Return (Zero) } PSAT |= 0x03 Local0 = PSAT /* \_SB_.I2C5.PSAT */ } Where PMID = 0x05, so we enter the Return (Zero) path on these systems. So even if we were to not call dev_pm_syscore_device(dev, true) the I2C controller will be left in D0 rather then be switched to D3. Yet on other Bay and Cherry Trail devices S0ix is not entered unless *all* I2C controllers are in D3 mode. This combined with the I2C controller no longer working now that we reach S0ix states on these systems leads to me believing that the PUNIT itself puts the I2C controller in D3 when all other conditions for entering S0ix states are true. Since now the I2C controller is put in D3 over a suspend/resume we must re-initialize it afterwards and that does indeed fix it no longer working. This commit implements this fix by: 1) Making the suspend_late callback a no-op if pm_disabled is set and making the resume_early callback skip the clock re-enable (since it now was not disabled) while still doing the necessary I2C controller re-init. 2) Removing the dev_pm_syscore_device(dev, true) call, so that the suspend and resume callbacks are actually called. Normally this would cause the ACPI pm code to call _PS3 putting the I2C controller in D3, wreaking havoc since it is shared with the PUNIT, but in this special case the _PS3 method is a no-op so we can safely allow a "fake" suspend / resume. Fixes: 12864ff8545f ("ACPI / LPSS: Avoid PM quirks on suspend and resume ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200861 Cc: 4.15+ <[email protected]> # 4.15+ Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Jarkko Nikula <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBusMika Westerberg1-1/+8
Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") made it possible for AML code to access SMBus I/O ports by installing custom SystemIO OpRegion handler and blocking i80i driver access upon first AML read/write to this OpRegion. However, while ThinkPad T560 does have SystemIO OpRegion declared under the SMBus device, it does not access any of the SMBus registers: Device (SMBU) { ... OperationRegion (SMBP, PCI_Config, 0x50, 0x04) Field (SMBP, DWordAcc, NoLock, Preserve) { , 5, TCOB, 11, Offset (0x04) } Name (TCBV, 0x00) Method (TCBS, 0, NotSerialized) { If ((TCBV == 0x00)) { TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05) } Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */ } OperationRegion (TCBA, SystemIO, TCBS (), 0x10) Field (TCBA, ByteAcc, NoLock, Preserve) { Offset (0x04), , 9, CPSC, 1 } } Problem with the current approach is that it blocks all I/O port access and because this system has touchpad connected to the SMBus controller after first AML access (happens during suspend/resume cycle) the touchpad fails to work anymore. Fix this so that we allow ACPI AML I/O port access if it does not touch the region reserved for the SMBus. Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737 Reported-by: Yussuf Khalil <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-08-30Merge tag 'for-linus-20180830' of git://git.kernel.dk/linux-blockLinus Torvalds12-108/+269
Pull block fixes from Jens Axboe: "Small collection of fixes that should go into this series. This pull contains: - NVMe pull request with three small fixes (via Christoph) - Kill useless NULL check before kmem_cache_destroy (Chengguang Xu) - Xen block driver pull request with persistent grant flushing fixes (Juergen Gross) - Final wbt fixes, wrapping up the changes for this series. These have been heavily tested (me) - cdrom info leak fix (Scott Bauer) - ATA dma quirk for SQ201 (Linus Walleij) - Straight forward bsg refcount_t conversion (John Pittman)" * tag 'for-linus-20180830' of git://git.kernel.dk/linux-block: cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_status nvmet: free workqueue object if module init fails nvme-fcloop: Fix dropped LS's to removed target port nvme-pci: add a memory barrier to nvme_dbbuf_update_and_check_event block: bsg: move atomic_t ref_count variable to refcount API block: remove unnecessary condition check ata: ftide010: Add a quirk for SQ201 blk-wbt: remove dead code blk-wbt: improve waking of tasks blk-wbt: abstract out end IO completion handler xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring xen/blkback: move persistent grants flags to bool xen/blkfront: reorder tests in xlblk_init() xen/blkfront: cleanup stale persistent grants xen/blkback: don't keep persistent grants too long
2018-08-30ipmi: kcs_bmc: don't change device nameBenjamin Fair1-3/+4
kcs_bmc_alloc(...) calls dev_set_name(...) which is incorrect as most bus driver frameworks, platform_driver in particular, assume that they are able to set the device name themselves. Signed-off-by: Benjamin Fair <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2018-08-30of: add node name compare helper functionsRob Herring2-0/+35
In preparation to remove device_node.name pointer, add helper functions for node name comparisons which are a common pattern throughout the kernel. Cc: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-08-30perf annotate: Fix parsing aarch64 branch instructions after objdump updateKim Phillips2-1/+22
Starting with binutils 2.28, aarch64 objdump adds comments to the disassembly output to show the alternative names of a condition code [1]. It is assumed that commas in objdump comments could occur in other arches now or in the future, so this fix is arch-independent. The fix could have been done with arm64 specific jump__parse and jump__scnprintf functions, but the jump__scnprintf instruction would have to have its comment character be a literal, since the scnprintf functions cannot receive a struct arch easily. This inconvenience also applies to the generic jump__scnprintf, which is why we add a raw_comment pointer to struct ins_operands, so the __parse function assigns it to be re-used by its corresponding __scnprintf function. Example differences in 'perf annotate --stdio2' output on an aarch64 perf.data file: BEFORE: → b.cs ffff200008133d1c <unwind_frame+0x18c> // b.hs, dffff7ecc47b AFTER : ↓ b.cs 18c BEFORE: → b.cc ffff200008d8d9cc <get_alloc_profile+0x31c> // b.lo, b.ul, dffff727295b AFTER : ↓ b.cc 31c The branch target labels 18c and 31c also now appear in the output: BEFORE: add x26, x29, #0x80 AFTER : 18c: add x26, x29, #0x80 BEFORE: add x21, x21, #0x8 AFTER : 31c: add x21, x21, #0x8 The Fixes: tag below is added so stable branches will get the update; it doesn't necessarily mean that commit was broken at the time, rather it didn't withstand the aarch64 objdump update. Tested no difference in output for sample x86_64, power arch perf.data files. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=bb7eff5206e4795ac79c177a80fe9f4630aaf730 Signed-off-by: Kim Phillips <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Anton Blanchard <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Robin Murphy <[email protected]> Cc: Taeung Song <[email protected]> Cc: [email protected] Fixes: b13bbeee5ee6 ("perf annotate: Fix branch instruction with multiple operands") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.