Age | Commit message (Collapse) | Author | Files | Lines |
|
ST7789V_COLMOD_RGB_FMT_18BITS and ST7789V_COLMOD_CTRL_FMT_18BITS
are unused in favour of MIPI_DCS_PIXEL_FMT_18BIT, remove them.
Reviewed-by: Michael Riesch <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
SPI device drivers should also have a SPI ID table.
Reviewed-by: Michael Riesch <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add compatible value for Inanbo t28cp45tn89 and make reset GPIO non
mandatory, since it might not be connected to the CPU.
Reviewed-by: Michael Riesch <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Shenzhen INANBO Electronic Technology Co., Ltd. manufacturers TFT/OLED
LCD panels.
Reviewed-by: Michael Riesch <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The drm_exec tests where crashing[0] because of a null dereference. This
is caused by a new access of the `driver` attribute of `struct
drm_driver` on drm_gem_private_object_init(). Alloc the drm_device to
fix that.
[0]
[15:05:24] ================== drm_exec (6 subtests) ===================
[15:05:24] [PASSED] sanitycheck
^CERROR:root:Build interruption occurred. Cleaning console.
[15:05:50] [ERROR] Test: drm_exec: missing expected subtest!
[15:05:50] BUG: kernel NULL pointer dereference, address: 00000000000000b0
[15:05:50] #PF: supervisor read access in kernel mode
[15:05:50] #PF: error_code(0x0000) - not-present page
[15:05:50] PGD 0 P4D 0
[15:05:50] Oops: 0000 [#1] PREEMPT NOPTI
[15:05:50] CPU: 0 PID: 23 Comm: kunit_try_catch Tainted: G N 6.4.0-rc7-02032-ge6303f323b1a #69
[15:05:50] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
[15:05:50] RIP: 0010:drm_gem_private_object_init+0x60/0xc0
Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings")
Signed-off-by: Arthur Grillo <[email protected]>
Tested-by: Danilo Krummrich <[email protected]>
Acked-by: Danilo Krummrich <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently frontbuffer tracking code is directly iterating over object vmas
and clearing scanout flags for them. Add function to clear scanout flag for
vmas and use it from frontbuffer tracking code.
v2: describe function parameter.
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now as we have removed all the references to internals of i915_gem_object
from the frontbuffer header we can also remove including
i915_gem_object_types.h.
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Jeevan B <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add getter/setter for i915_gem_object->frontbuffer and use it instead of
directly touching i915_gem_object->frontbuffer frontbuffer pointer.
v3:
- Fix intel_frontbuffer_get return value
- s/front_ret/cur/
v2: Move getter/setter into i915_gem_object.h
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We want to stop touching directly i915_gem_object struct members in
intel_frontbuffer code. As a part of this we add helper macro to get i915
device from i915_gem_object.
v2: operate on and return pointer in defined macros
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add sync object DRM UAPI support to VirtIO-GPU driver. Sync objects
support is needed by native context VirtIO-GPU Mesa drivers, it also will
be used by Venus and Virgl contexts.
Reviewed-by; Emil Velikov <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Tested-by: Pierre-Eric Pelloux-Prayer <[email protected]> # amdgpu nctx
Tested-by: Rob Clark <[email protected]> # freedreno nctx
Reviewed-by: Rob Clark <[email protected]>
Acked-by: Gurchetan Singh <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the following make htmldocs errors/warnings:
./drivers/gpu/drm/i915/gt/uc/intel_huc.c:29: ERROR: Unexpected indentation.
./drivers/gpu/drm/i915/gt/uc/intel_huc.c:30: WARNING: Block quote ends without a blank line; unexpected unindent.
./drivers/gpu/drm/i915/gt/uc/intel_huc.c:35: WARNING: Bullet list ends without a blank line; unexpected unindent.
This output is a bit misleading. The real issue here is we need a blank
line before and after the bulleted list.
Link: https://www.kernel.org/doc/html/latest/gpu/i915.html#huc
Link: https://lore.kernel.org/dri-devel/[email protected]/
Signed-off-by: David Reaver <[email protected]>
Reviewed-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Deferred-I/O generator macros generate callbacks for struct fb_ops
that operate on memory ranges in I/O address space or system address
space. Rename the macros to use the _IOMEM_ and _SYSMEM_ infixes of
their underlying helpers. Adapt all users. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Helge Deller <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Helge Deller <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Change the infix for fbdev's system-memory helpers from _SYS_ to
_SYSMEM_. The helpers perform operations within system memory, but
not on the state of the operating system itself. Naming should make
this clear. Adapt all users. No functional changes.
Suggested-by: Helge Deller <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Helge Deller <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Change the infix for fbdev's I/O-memory helpers from _IO_ to _IOMEM_
to distiguish them from other types of I/O, such as file operations.
The helpers operate on memory ranges in the I/O address space and the
naming should make this clear. Adapt all users. No functional changes.
Suggested-by: Helge Deller <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Helge Deller <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.
Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
display using MIPI DSI interface.
Signed-off-by: Guillaume La Roque <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Alexandre Mergnat <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Startek KD070FHFID015 is a 7-inch TFT LCD display with a resolution
of 1024 x 600 pixels.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Alexandre Mergnat <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for TDO TL050HDV35-H1311A LCD panel.
Signed-off-by: Matus Gajdos <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for TDO TL050HDV35-H1311A LCD panel.
Signed-off-by: Matus Gajdos <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Specify bpc value for the powertip_ph800480t013_idf02 panel to stop drm
code from complaining about unexpected bpc value (0).
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The newly added driver only builds when DRM_DISPLAY_DP_HELPER is enabled:
x86_64-linux-ld: drivers/gpu/drm/panel/panel-visionox-r66451.o: in function `visionox_r66451_enable':
panel-visionox-r66451.c:(.text+0x105): undefined reference to `drm_dsc_pps_payload_pack'
Select both CONFIG_DRM_DISPLAY_DP_HELPER and CONFIG_DRM_DISPLAY_HELPER to
ensure the helper function is always available.
Fixes: a6dfab2738fc ("drm/panel: Add driver for Visionox r66451 panel")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We've had a couple of tests that weren't really obvious, nor did they
document what they were supposed to test. Document that to make it
hopefully more obvious.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Now that we have a helper that takes care of an atomic state allocation
and cleanup, we can migrate to it to simplify our tests.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The new helper to init the locking context allows to remove some
boilerplate.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The *_mock_device functions allocate a DRM device that needs to be
released using drm_dev_unregister.
Now that we have a kunit release action API, we can switch to it and
don't require any kind of garbage collection from the caller.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.
Remove it.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
As we gain more tests, boilerplate to allocate an atomic state and free
it starts to be there more and more as well.
In order to reduce the allocation boilerplate, we can create a helper
to create that atomic state, and call an action when the test is done.
This will also clean up the exit path.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
As we get more and more tests, the locking context initialisation
creates more and more boilerplate, both at creation and destruction.
Let's create a helper that will allocate, initialise a context, and
register kunit actions to clean up once the test is done.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.
Remove it.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.
Remove it.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.
Remove it.
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Infinite waits for completion of GPU activity have been observed in CI,
mostly inside __i915_active_wait(), triggered by igt@gem_barrier_race or
igt@perf@stress-open-close. Root cause analysis, based of ftrace dumps
generated with a lot of extra trace_printk() calls added to the code,
revealed loops of request dependencies being accidentally built,
preventing the requests from being processed, each waiting for completion
of another one's activity.
After we substitute a new request for a last active one tracked on a
timeline, we set up a dependency of our new request to wait on completion
of current activity of that previous one. While doing that, we must take
care of keeping the old request still in memory until we use its
attributes for setting up that await dependency, or we can happen to set
up the await dependency on an unrelated request that already reuses the
memory previously allocated to the old one, already released. Combined
with perf adding consecutive kernel context remote requests to different
user context timelines, unresolvable loops of await dependencies can be
built, leading do infinite waits.
We obtain a pointer to the previous request to wait upon when we
substitute it with a pointer to our new request in an active tracker,
e.g. in intel_timeline.last_request. In some processing paths we protect
that old request from being freed before we use it by getting a reference
to it under RCU protection, but in others, e.g. __i915_request_commit()
-> __i915_request_add_to_timeline() -> __i915_request_ensure_ordering(),
we don't. But anyway, since the requests' memory is SLAB_FAILSAFE_BY_RCU,
that RCU protection is not sufficient against reuse of memory.
We could protect i915_request's memory from being prematurely reused by
calling its release function via call_rcu() and using rcu_read_lock()
consequently, as proposed in v1. However, that approach leads to
significant (up to 10 times) increase of SLAB utilization by i915_request
SLAB cache. Another potential approach is to take a reference to the
previous active fence.
When updating an active fence tracker, we first lock the new fence,
substitute a pointer of the current active fence with the new one, then we
lock the substituted fence. With this approach, there is a time window
after the substitution and before the lock when the request can be
concurrently released by an interrupt handler and its memory reused, then
we may happen to lock and return a new, unrelated request.
Always get a reference to the current active fence first, before
replacing it with a new one. Having it protected from premature release
and reuse, lock it and then replace with the new one but only if not
yet signalled via a potential concurrent interrupt nor replaced with
another one by a potential concurrent thread, otherwise retry, starting
from getting a reference to the new current one. Adjust users to not
get a reference to the previous active fence themselves and always put the
reference got by __i915_active_fence_set() when no longer needed.
v3: Fix lockdep splat reports and other issues caused by incorrect use of
try_cmpxchg() (use (cmpxchg() != prev) instead)
v2: Protect request's memory by getting a reference to it in favor of
delegating its release to call_rcu() (Chris)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8211
Fixes: df9f85d8582e ("drm/i915: Serialise i915_active_fence_set() with itself")
Suggested-by: Chris Wilson <[email protected]>
Signed-off-by: Janusz Krzysztofik <[email protected]>
Cc: <[email protected]> # v5.6+
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When building with W=1, the following warning occurs.
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx781x_i2c_addresses[] = {
^~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx7808_i2c_addresses[] = {
When CONFIG_IO is disabled, above two variables are not used,
since the place where it is used is inclueded in the macro
CONFIG_OF.
Even for drivers that do not depend on CONFIG_OF, it's almost
always better to leave out the of_match_ptr(), since the only
thing it can possibly do is to save a few bytes of .text if a
driver can be used both with and without it. Hence we remove
all of_match_ptr() used in other places.
Fixes: 0647e7dd3f7a ("drm/bridge: Add Analogix anx78xx support")
Signed-off-by: Zhu Wang <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
No functional modification involved.
drivers/gpu/drm/solomon/ssd130x.c:715 ssd130x_primary_plane_duplicate_state() warn: inconsistent indenting.
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6034
Signed-off-by: Jiapeng Chong <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As of commit a01cb8ba3f628293 ("drm: Move drm_plane_helper_check_state()
into drm_atomic_helper.c"), drm_plane_helper_check_state() no longer
exists, but is part of drm_atomic_helper_check_plane_state().
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/8bb42a92fc20e3d11e5847e7f15a47c687b73104.1689779916.git.geert+renesas@glider.be
|
|
The transitional helpers were removed a long time ago, but some
references stuck. Remove them.
Fixes: 21ebe615c16994f3 ("drm: Remove transitional helpers")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ad4a2f1f9fa7da083132f6c35469c77a3f9e2f0e.1689779916.git.geert+renesas@glider.be
|
|
Convert the references to fbconv links to footnotes, so they can be
navigated.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/0761f98d3b6f8df9eea977eae063e35b450fda9e.1689779916.git.geert+renesas@glider.be
|
|
The section about converting existing KMS drivers to atomic modesetting
mentions the existence of a conversion guide, but does not reference it.
While the guide is old and rusty, it still contains useful information,
so add a link to it. Also link to the LWN.net articles that give an
overview about the atomic mode setting design.
While at it, remove the reference to unconverted virtual HW drivers, as
they've been converted.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/6809d0fda0716892cbccf0ee272481032251026d.1689779916.git.geert+renesas@glider.be
|
|
As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.
Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As ffs() returns one more than the index of the first bit set (zero
means no bits set), the color key mode value is shifted one position too
much.
Fix this by using FIELD_GET() instead.
Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be
|
|
Fix a misspelling of "rendez-vous".
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/084bf178dd676a4f07933eb9fcd04d3e30a779ba.1689600209.git.geert+renesas@glider.be
|
|
Fix misspellings of "semaphore".
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Hamza Mahfooz <[email protected]>
Acked-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/8b0542c12a2427f34a792c41ac2d2a2922874bfa.1689600102.git.geert+renesas@glider.be
|
|
Use the drm_crtc_helper_atomic_check() helper instead of open-coding the
same operation.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/dcb09c0c7bed1baee39a72caba098a399ce7f063.1689599767.git.geert+renesas@glider.be
|
|
drm_connector_init_with_ddc() can fail, but the call in
drm_bridge_connector_init() does not check that. Fix this by adding
the missing error handling.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Maxime Ripard <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/3a7e9540d8dc94298d021aa2fb046ae8616ca4dd.1689599701.git.geert+renesas@glider.be
|
|
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.
Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.
Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the already existing local variable height = drm_rect_height() >> 16
to replace other occurrences of the same value.
Suggested-by: Lucas Stach <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Philipp Zabel <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|