aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-28Merge series "add ecspi ERR009165 for i.mx6/7 soc family" from Robin Gong ↵Mark Brown1-4/+27
<[email protected]>: There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO transfer to be send twice in DMA mode. Please get more information from: https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding new sdma ram script which works in XCH mode as PIO inside sdma instead of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul. NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/ 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi' for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata or not. The first two reverted patches should be the same issue, though, it seems 'fixed' by changing to other shp script. Hope Sean or Sascha could have the chance to test this patch set if could fix their issues. Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work on i.mx8mm because the event id is zero. PS: Please get sdma firmware from below linux-firmware and copy it to your local rootfs /lib/firmware/imx/sdma. https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma v2: 1.Add commit log for reverted patches. 2.Add comment for 'ecspi_fixed' in sdma driver. 3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi' rather than remove. v3: 1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips. Correct dts related dts patch in v2. 2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag in spi-imx driver to state ERR009165 fixed or not. 3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the errata workaroud, thus improve performance as possible. v4: 1.Add Ack tag from Mark and Vinod 2.Remove checking 'event_id1' zero as 'event_id0'. v5: 1.Add the last patch for compatible with the current uart driver which using rom script, so both uart ram script and rom script supported in latest firmware, by default uart rom script used. UART driver will be broken without this patch. v6: 1.Resend after rebase the latest next branch. 2.Remove below No.13~No.15 patches of v5 because they were mergered. ARM: dts: imx6ul: add dma support on ecspi ARM: dts: imx6sll: correct sdma compatible arm64: defconfig: Enable SDMA on i.mx8mq/8mm 3.Revert "dmaengine: imx-sdma: fix context cache" since 'context_loaded' removed. v7: 1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine to load context only once" so that no building waring during comes out during bisect. 2.Address Sascha's comments, including eliminating any i.mx6sx in this series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking care SMC bit for PIO. 3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7) 'spi: imx: add new i.mx6ul compatible name in binding doc' v8: 1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and merge it into 04/13 of v7 2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for no any ecspi function broken even if sdma firmware not updated. 3.merge 'tx.dst_maxburst' changes in the two continous patches into one patch to avoid confusion. 4.fix typo 'duplicated'. Robin Gong (13): Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Revert "dmaengine: imx-sdma: refine to load context only once" dmaengine: imx-sdma: remove duplicated sdma_load_context spi: imx: fallback to PIO if dma setup failure dmaengine: imx-sdma: add mcu_2_ecspi script spi: imx: fix ERR009165 spi: imx: remove ERR009165 workaround on i.mx6ul spi: imx: add new i.mx6ul compatible name in binding doc dmaengine: imx-sdma: remove ERR009165 on i.mx6ul dma: imx-sdma: add i.mx6ul compatible name dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm dmaengine: imx-sdma: add uart rom script .../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 + .../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 + arch/arm/boot/dts/imx6q.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 8 +- drivers/dma/imx-sdma.c | 67 ++++++++++------ drivers/spi/spi-imx.c | 92 +++++++++++++++++++--- include/linux/platform_data/dma-imx-sdma.h | 8 +- 7 files changed, 135 insertions(+), 44 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-05-28spi: tegra20-sflash: Fix runtime PM imbalance on errorDinghao Liu1-0/+1
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-05-28spi: tegra20-slink: Fix runtime PM imbalance on errorDinghao Liu1-0/+1
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-05-28spi: tegra114: Fix runtime PM imbalance on errorDinghao Liu1-0/+1
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-05-28spi: imx: fallback to PIO if dma setup failureRobin Gong1-4/+27
Fallback to PIO in case dma setup failed. For example, sdma firmware not updated but ERR009165 workaroud added in kernel. Signed-off-by: Robin Gong <[email protected]> Acked-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-05-28arm64/kernel: Fix return value when cpu_online() fails in __cpu_up()Nobuhiro Iwamatsu1-1/+1
If boot_secondary() was successful, and cpu_online() was an error in __cpu_up(), -EIO was returned, but 0 is returned by commit d22b115cbfbb7 ("arm64/kernel: Simplify __cpu_up() by bailing out early"). Therefore, bringup_wait_for_ap() causes the primary core to wait for a long time, which may cause boot failure. This commit sets -EIO to return code under the same conditions. Fixes: d22b115cbfbb ("arm64/kernel: Simplify __cpu_up() by bailing out early") Signed-off-by: Nobuhiro Iwamatsu <[email protected]> Tested-by: Yuji Ishikawa <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: Gavin Shan <[email protected]> Cc: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] [[email protected]: return -EIO at the end of the function] Signed-off-by: Catalin Marinas <[email protected]>
2020-05-28crypto: hisilicon - fix driver compatibility issue with different versions ↵Weili Qian5-112/+39
of devices In order to be compatible with devices of different versions, V1 in the accelerator driver is now isolated, and other versions are the previous V2 processing flow. Signed-off-by: Weili Qian <[email protected]> Signed-off-by: Shukun Tan <[email protected]> Reviewed-by: Zhou Wang <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-05-28crypto: engine - do not requeue in case of fatal errorIuliana Prodan1-4/+1
Now, in crypto-engine, if hardware queue is full (-ENOSPC), requeue request regardless of MAY_BACKLOG flag. If hardware throws any other error code (like -EIO, -EINVAL, -ENOMEM, etc.) only MAY_BACKLOG requests are enqueued back into crypto-engine's queue, since the others can be dropped. The latter case can be fatal error, so those cannot be recovered from. For example, in CAAM driver, -EIO is returned in case the job descriptor is broken, so there is no possibility to fix the job descriptor. Therefore, these errors might be fatal error, so we shouldn’t requeue the request. This will just be pass back and forth between crypto-engine and hardware. Fixes: 6a89f492f8e5 ("crypto: engine - support for parallel requests based on retry mechanism") Signed-off-by: Iuliana Prodan <[email protected]> Reported-by: Horia Geantă <[email protected]> Reviewed-by: Horia Geantă <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-05-28crypto: cavium/nitrox - Fix a typo in a commentChristophe JAILLET1-1/+1
s/NITORX/NITROX/ Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-05-28Merge tag 'amd-drm-fixes-5.7-2020-05-27' of ↵Dave Airlie2-7/+2
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-05-27: amdgpu: - Display atomic test fix - Fix soft hang in display vupdate code Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-05-28csky: Fixup CONFIG_DEBUG_RSEQGuo Ren1-5/+10
Put the rseq_syscall check point at the prologue of the syscall will break the a0 ... a7. This will casue system call bug when DEBUG_RSEQ is enabled. So move it to the epilogue of syscall, but before syscall_trace. Signed-off-by: Guo Ren <[email protected]>
2020-05-28csky: Coding convention in entry.SGuo Ren4-40/+42
There is no fixup or feature in the patch, we only cleanup with: - Remove unnecessary reg used (r11, r12), just use r9 & r10 & syscallid regs as temp useage. - Add _TIF_SYSCALL_WORK and _TIF_WORK_MASK to gather macros. Signed-off-by: Guo Ren <[email protected]>
2020-05-28csky: Fixup abiv2 syscall_trace break a4 & a5Guo Ren2-2/+6
Current implementation could destory a4 & a5 when strace, so we need to get them from pt_regs by SAVE_ALL. Signed-off-by: Guo Ren <[email protected]>
2020-05-28csky: Fixup CONFIG_PREEMPT panicGuo Ren3-27/+11
log: [    0.13373200] Calibrating delay loop... [    0.14077600] ------------[ cut here ]------------ [    0.14116700] WARNING: CPU: 0 PID: 0 at kernel/sched/core.c:3790 preempt_count_add+0xc8/0x11c [    0.14348000] DEBUG_LOCKS_WARN_ON((preempt_count() < 0))Modules linked in: [    0.14395100] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0 #7 [    0.14410800] [    0.14427400] Call Trace: [    0.14450700] [<807cd226>] dump_stack+0x8a/0xe4 [    0.14473500] [<80072792>] __warn+0x10e/0x15c [    0.14495900] [<80072852>] warn_slowpath_fmt+0x72/0xc0 [    0.14518600] [<800a5240>] preempt_count_add+0xc8/0x11c [    0.14544900] [<807ef918>] _raw_spin_lock+0x28/0x68 [    0.14572600] [<800e0eb8>] vprintk_emit+0x84/0x2d8 [    0.14599000] [<800e113a>] vprintk_default+0x2e/0x44 [    0.14625100] [<800e2042>] vprintk_func+0x12a/0x1d0 [    0.14651300] [<800e1804>] printk+0x30/0x48 [    0.14677600] [<80008052>] lockdep_init+0x12/0xb0 [    0.14703800] [<80002080>] start_kernel+0x558/0x7f8 [    0.14730000] [<800052bc>] csky_start+0x58/0x94 [    0.14756600] irq event stamp: 34 [    0.14775100] hardirqs last  enabled at (33): [<80067370>] ret_from_exception+0x2c/0x72 [    0.14793700] hardirqs last disabled at (34): [<800e0eae>] vprintk_emit+0x7a/0x2d8 [    0.14812300] softirqs last  enabled at (32): [<800655b0>] __do_softirq+0x578/0x6d8 [    0.14830800] softirqs last disabled at (25): [<8007b3b8>] irq_exit+0xec/0x128 The preempt_count of reg could be destroyed after csky_do_IRQ without reload from memory. After reference to other architectures (arm64, riscv), we move preempt entry into ret_from_exception and disable irq at the beginning of ret_from_exception instead of RESTORE_ALL. Signed-off-by: Guo Ren <[email protected]> Reported-by: Lu Baoquan <[email protected]>
2020-05-27IB/ipoib: Fix double free of skb in case of multicast traffic in CM modeValentine Fatiev4-12/+26
When connected mode is set, and we have connected and datagram traffic in parallel, ipoib might crash with double free of datagram skb. The current mechanism assumes that the order in the completion queue is the same as the order of sent packets for all QPs. Order is kept only for specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and few CM's) in parallel. The problem: ---------------------------------------------------------- Transmit queue: ----------------- UD skb pointer kept in queue itself, CM skb kept in spearate queue and uses transmit queue as a placeholder to count the number of total transmitted packets. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ tail head Completion queue (problematic scenario) - the order not the same as in the transmit queue: 1 2 3 4 5 6 7 8 9 ------------------------------------ ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5 ------------------------------------ 1. CM1 'wc' processing - skb freed in cm separate ring. - tx_tail of transmit queue increased although UD2 is not freed. Now driver assumes UD2 index is already freed and it could be used for new transmitted skb. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ ^ (Bad)tail head (Bad - Could be used for new SKB) In this case (due to heavy load) UD2 skb pointer could be replaced by new transmitted packet UD_NEW, as the driver assumes its free. At this point we will have to process two 'wc' with same index but we have only one pointer to free. During second attempt to free the same skb we will have NULL pointer exception. 2. UD2 'wc' processing - skb freed according the index we got from 'wc', but it was already overwritten by mistake. So actually the skb that was released is the skb of the new transmitted packet and not the original one. 3. UD_NEW 'wc' processing - attempt to free already freed skb. NUll pointer exception. The fix: ----------------------------------------------------------------------- The fix is to stop using the UD ring as a placeholder for CM packets, the cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a new cyclic variables global_tx_head and global_tx_tail are introduced for managing and counting the overall outstanding sent packets, then the send queue will be stopped and waken based on these variables only. Note that no locking is needed since global_tx_head is updated in the xmit flow and global_tx_tail is updated in the NAPI flow only. A previous attempt tried to use one variable to count the outstanding sent packets, but it did not work since xmit and NAPI flows can run at the same time and the counter will be updated wrongly. Thus, we use the same simple cyclic head and tail scheme that we have today for the UD tx_ring. Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Valentine Fatiev <[email protected]> Signed-off-by: Alaa Hleihel <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Acked-by: Doug Ledford <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-27drm/amd/display: Fix potential integer wraparound resulting in a hangAric Cyr1-0/+2
[Why] If VUPDATE_END is before VUPDATE_START the delay calculated can become very large, causing a soft hang. [How] Take the absolute value of the difference between START and END. Signed-off-by: Aric Cyr <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-05-27drm/amd/display: drop cursor position check in atomic testSimon Ser1-7/+0
get_cursor_position already handles the case where the cursor has negative off-screen coordinates by not setting dc_cursor_position.enabled. Signed-off-by: Simon Ser <[email protected]> Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane") Cc: Alex Deucher <[email protected]> Cc: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-05-27net: dsa: declare lockless TX feature for slave portsVladimir Oltean1-0/+1
Be there a platform with the following layout: Regular NIC | +----> DSA master for switch port | +----> DSA master for another switch port After changing DSA back to static lockdep class keys in commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), this kernel splat can be seen: [ 13.361198] ============================================ [ 13.366524] WARNING: possible recursive locking detected [ 13.371851] 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 Not tainted [ 13.377874] -------------------------------------------- [ 13.383201] swapper/0/0 is trying to acquire lock: [ 13.388004] ffff0000668ff298 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.397879] [ 13.397879] but task is already holding lock: [ 13.403727] ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.413593] [ 13.413593] other info that might help us debug this: [ 13.420140] Possible unsafe locking scenario: [ 13.420140] [ 13.426075] CPU0 [ 13.428523] ---- [ 13.430969] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.435946] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.440924] [ 13.440924] *** DEADLOCK *** [ 13.440924] [ 13.446860] May be due to missing lock nesting notation [ 13.446860] [ 13.453668] 6 locks held by swapper/0/0: [ 13.457598] #0: ffff800010003de0 ((&idev->mc_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x400 [ 13.466593] #1: ffffd4d3fb478700 (rcu_read_lock){....}-{1:2}, at: mld_sendpack+0x0/0x560 [ 13.474803] #2: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x64/0xb10 [ 13.483886] #3: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.492793] #4: ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.503094] #5: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.512000] [ 13.512000] stack backtrace: [ 13.516369] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 [ 13.530421] Call trace: [ 13.532871] dump_backtrace+0x0/0x1d8 [ 13.536539] show_stack+0x24/0x30 [ 13.539862] dump_stack+0xe8/0x150 [ 13.543271] __lock_acquire+0x1030/0x1678 [ 13.547290] lock_acquire+0xf8/0x458 [ 13.550873] _raw_spin_lock+0x44/0x58 [ 13.554543] __dev_queue_xmit+0x84c/0xbe0 [ 13.558562] dev_queue_xmit+0x24/0x30 [ 13.562232] dsa_slave_xmit+0xe0/0x128 [ 13.565988] dev_hard_start_xmit+0xf4/0x448 [ 13.570182] __dev_queue_xmit+0x808/0xbe0 [ 13.574200] dev_queue_xmit+0x24/0x30 [ 13.577869] neigh_resolve_output+0x15c/0x220 [ 13.582237] ip6_finish_output2+0x244/0xb10 [ 13.586430] __ip6_finish_output+0x1dc/0x298 [ 13.590709] ip6_output+0x84/0x358 [ 13.594116] mld_sendpack+0x2bc/0x560 [ 13.597786] mld_ifc_timer_expire+0x210/0x390 [ 13.602153] call_timer_fn+0xcc/0x400 [ 13.605822] run_timer_softirq+0x588/0x6e0 [ 13.609927] __do_softirq+0x118/0x590 [ 13.613597] irq_exit+0x13c/0x148 [ 13.616918] __handle_domain_irq+0x6c/0xc0 [ 13.621023] gic_handle_irq+0x6c/0x160 [ 13.624779] el1_irq+0xbc/0x180 [ 13.627927] cpuidle_enter_state+0xb4/0x4d0 [ 13.632120] cpuidle_enter+0x3c/0x50 [ 13.635703] call_cpuidle+0x44/0x78 [ 13.639199] do_idle+0x228/0x2c8 [ 13.642433] cpu_startup_entry+0x2c/0x48 [ 13.646363] rest_init+0x1ac/0x280 [ 13.649773] arch_call_rest_init+0x14/0x1c [ 13.653878] start_kernel+0x490/0x4bc Lockdep keys themselves were added in commit ab92d68fc22f ("net: core: add generic lockdep keys"), and it's very likely that this splat existed since then, but I have no real way to check, since this stacked platform wasn't supported by mainline back then. >From Taehee's own words: This patch was considered that all stackable devices have LLTX flag. But the dsa doesn't have LLTX, so this splat happened. After this patch, dsa shares the same lockdep class key. On the nested dsa interface architecture, which you illustrated, the same lockdep class key will be used in __dev_queue_xmit() because dsa doesn't have LLTX. So that lockdep detects deadlock because the same lockdep class key is used recursively although actually the different locks are used. There are some ways to fix this problem. 1. using NETIF_F_LLTX flag. If possible, using the LLTX flag is a very clear way for it. But I'm so sorry I don't know whether the dsa could have LLTX or not. 2. using dynamic lockdep again. It means that each interface uses a separate lockdep class key. So, lockdep will not detect recursive locking. But this way has a problem that it could consume lockdep class key too many. Currently, lockdep can have 8192 lockdep class keys. - you can see this number with the following command. cat /proc/lockdep_stats lock-classes: 1251 [max: 8192] ... The [max: 8192] means that the maximum number of lockdep class keys. If too many lockdep class keys are registered, lockdep stops to work. So, using a dynamic(separated) lockdep class key should be considered carefully. In addition, updating lockdep class key routine might have to be existing. (lockdep_register_key(), lockdep_set_class(), lockdep_unregister_key()) 3. Using lockdep subclass. A lockdep class key could have 8 subclasses. The different subclass is considered different locks by lockdep infrastructure. But "lock-classes" is not counted by subclasses. So, it could avoid stopping lockdep infrastructure by an overflow of lockdep class keys. This approach should also have an updating lockdep class key routine. (lockdep_set_subclass()) 4. Using nonvalidate lockdep class key. The lockdep infrastructure supports nonvalidate lockdep class key type. It means this lockdep is not validated by lockdep infrastructure. So, the splat will not happen but lockdep couldn't detect real deadlock case because lockdep really doesn't validate it. I think this should be used for really special cases. (lockdep_set_novalidate_class()) Further discussion here: https://patchwork.ozlabs.org/project/netdev/patch/[email protected]/ There appears to be no negative side-effect to declaring lockless TX for the DSA virtual interfaces, which means they handle their own locking. So that's what we do to make the splat go away. Patch tested in a wide variety of cases: unicast, multicast, PTP, etc. Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Suggested-by: Taehee Yoo <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-27copy_xstate_to_kernel(): don't leave parts of destination uninitializedAl Viro1-38/+48
copy the corresponding pieces of init_fpstate into the gaps instead. Cc: [email protected] Tested-by: Alexander Potapenko <[email protected]> Acked-by: Borislav Petkov <[email protected]> Signed-off-by: Al Viro <[email protected]>
2020-05-27net: dsa: felix: send VLANs on CPU port as egress-taggedVladimir Oltean1-2/+6
As explained in other commits before (b9cd75e66895 and 87b0f983f66f), ocelot switches have a single egress-untagged VLAN per port, and the driver would deny adding a second one while an egress-untagged VLAN already exists. But on the CPU port (where the VLAN configuration is implicit, because there is no net device for the bridge to control), the DSA core attempts to add a VLAN using the same flags as were used for the front-panel port. This would make adding any untagged VLAN fail due to the CPU port rejecting the configuration: bridge vlan add dev swp0 vid 100 pvid untagged [ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1 [ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16 (note that port 5 is the CPU port and not the front-panel swp0). So this hardware will send all VLANs as tagged towards the CPU. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-27bridge: multicast: work around clang bugArnd Bergmann1-1/+2
Clang-10 and clang-11 run into a corner case of the register allocator on 32-bit ARM, leading to excessive stack usage from register spilling: net/bridge/br_multicast.c:2422:6: error: stack frame size of 1472 bytes in function 'br_multicast_get_stats' [-Werror,-Wframe-larger-than=] Work around this by marking one of the internal functions as noinline_for_stack. Link: https://bugs.llvm.org/show_bug.cgi?id=45802#c9 Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-27nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()Dongli Zhang1-4/+7
There may be a race between nvme_reap_pending_cqes() and nvme_poll(), e.g., when doing live reset while polling the nvme device. CPU X CPU Y nvme_poll() nvme_dev_disable() -> nvme_stop_queues() -> nvme_suspend_io_queues() -> nvme_suspend_queue() -> spin_lock(&nvmeq->cq_poll_lock); -> nvme_reap_pending_cqes() -> nvme_process_cq() -> nvme_process_cq() In the above scenario, the nvme_process_cq() for the same queue may be running on both CPU X and CPU Y concurrently. It is much more easier to reproduce the issue when CONFIG_PREEMPT is enabled in kernel. When CONFIG_PREEMPT is disabled, it would take longer time for nvme_stop_queues()-->blk_mq_quiesce_queue() to wait for grace period. This patch protects nvme_process_cq() with nvmeq->cq_poll_lock in nvme_reap_pending_cqes(). Fixes: fa46c6fb5d61 ("nvme/pci: move cqe check after device shutdown") Signed-off-by: Dongli Zhang <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-05-27vsock: fix timeout in vsock_accept()Stefano Garzarella1-1/+1
The accept(2) is an "input" socket interface, so we should use SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout. So this patch replace sock_sndtimeo() with sock_rcvtimeo() to use the right timeout in the vsock_accept(). Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Stefano Garzarella <[email protected]> Reviewed-by: Jorgen Hansen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-27nfp: flower: fix used time of merge flow statisticsHeinrich Kuhn1-1/+2
Prior to this change the correct value for the used counter is calculated but not stored nor, therefore, propagated to user-space. In use-cases such as OVS use-case at least this results in active flows being removed from the hardware datapath. Which results in both unnecessary flow tear-down and setup, and packet processing on the host. This patch addresses the problem by saving the calculated used value which allows the value to propagate to user-space. Found by inspection. Fixes: aa6ce2ea0c93 ("nfp: flower: support stats update for merge flows") Signed-off-by: Heinrich Kuhn <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-27net/sched: fix infinite loop in sch_fq_pieDavide Caratti2-2/+23
this command hangs forever: # tc qdisc add dev eth0 root fq_pie flows 65536 watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028] [...] CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ #167 RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie] Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48 RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590 RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699 R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0 R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8 FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0 Call Trace: qdisc_create+0x3fd/0xeb0 tc_modify_qdisc+0x3be/0x14a0 rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 we can't accept 65536 as a valid number for 'nflows', because the loop on 'idx' in fq_pie_init() will never end. The extack message is correct, but it doesn't say that 0 is not a valid number for 'flows': while at it, fix this also. Add a tdc selftest to check correct validation of 'flows'. CC: Ivan Vecera <[email protected]> Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti <[email protected]> Reviewed-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-27Merge tag 'fsnotify_for_v5.7-rc8' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fanotify FAN_DIR_MODIFY disabling from Jan Kara: "A single patch that disables FAN_DIR_MODIFY support that was merged in this merge window. When discussing further functionality we realized it may be more logical to guard it with a feature flag or to call things slightly differently (or maybe not) so let's not set the API in stone for now." * tag 'fsnotify_for_v5.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: turn off support for FAN_DIR_MODIFY
2020-05-27Merge branch 'for-5.7-fixes' of ↵Linus Torvalds6-30/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Reverted stricter synchronization for cgroup recursive stats which was prepping it for event counter usage which never got merged. The change was causing performation regressions in some cases. - Restore bpf-based device-cgroup operation even when cgroup1 device cgroup is disabled. - An out-param init fix. * 'for-5.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: device_cgroup: Cleanup cgroup eBPF device filter code xattr: fix uninitialized out-param Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"
2020-05-27RDMA/core: Fix double destruction of uobjectJason Gunthorpe2-8/+14
Fix use after free when user user space request uobject concurrently for the same object, within the RCU grace period. In that case, remove_handle_idr_uobject() is called twice and we will have an extra put on the uobject which cause use after free. Fix it by leaving the uobject write locked after it was removed from the idr. Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of UVERBS_LOOKUP_WRITE will do the work. refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 1381 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 1381 Comm: syz-executor.0 Not tainted 5.5.0-rc3 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x94/0xce panic+0x234/0x56f __warn+0x1cc/0x1e1 report_bug+0x200/0x310 fixup_bug.part.11+0x32/0x80 do_error_trap+0xd3/0x100 do_invalid_op+0x31/0x40 invalid_op+0x1e/0x30 RIP: 0010:refcount_warn_saturate+0xfe/0x1a0 Code: 0f 0b eb 9b e8 23 f6 6d ff 80 3d 6c d4 19 03 00 75 8d e8 15 f6 6d ff 48 c7 c7 c0 02 55 bd c6 05 57 d4 19 03 01 e8 a2 58 49 ff <0f> 0b e9 6e ff ff ff e8 f6 f5 6d ff 80 3d 42 d4 19 03 00 0f 85 5c RSP: 0018:ffffc90002df7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88810f6a193c RCX: ffffffffba649009 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88811b0283cc RBP: 0000000000000003 R08: ffffed10236060e3 R09: ffffed10236060e3 R10: 0000000000000001 R11: ffffed10236060e2 R12: ffff88810f6a193c R13: ffffc90002df7d60 R14: 0000000000000000 R15: ffff888116ae6a08 uverbs_uobject_put+0xfd/0x140 __uobj_perform_destroy+0x3d/0x60 ib_uverbs_close_xrcd+0x148/0x170 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f759d122c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 0000000000465b49 RDX: 000000000000000c RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f759d1236bc R13: 00000000004ca27c R14: 000000000070de40 R15: 00000000ffffffff Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x39400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 7452a3c745a2 ("IB/uverbs: Allow RDMA_REMOVE_DESTROY to work concurrently with disassociate") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-27fanotify: turn off support for FAN_DIR_MODIFYAmir Goldstein2-3/+2
FAN_DIR_MODIFY has been enabled by commit 44d705b0370b ("fanotify: report name info for FAN_DIR_MODIFY event") in 5.7-rc1. Now we are planning further extensions to the fanotify API and during that we realized that FAN_DIR_MODIFY may behave slightly differently to be more consistent with extensions we plan. So until we finalize these extensions, let's not bind our hands with exposing FAN_DIR_MODIFY to userland. Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2020-05-27Merge branch 'exec-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull execve fix from Eric Biederman: "While working on my exec cleanups I found a bug in exec that winds up miscomputing the ambient credentials during exec. Andy appears to have to been confused as to why credentials are computed for both the script and the interpreter From the original patch description: [3] Linux very confusingly processes both the script and the interpreter if applicable, for reasons that elude me. The results from thinking about a script's file capabilities and/or setuid bits are mostly discarded. The only value in struct cred that gets changed in cap_bprm_set_creds that I could find that might persist between the script and the interpreter was cap_ambient. Which is fixed with this trivial change" * 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: exec: Always set cap_ambient in cap_bprm_set_creds
2020-05-27hwmon: (applesmc) avoid overlong udelay()Arnd Bergmann1-3/+9
Building this driver with "clang -O3" produces a link error after the compiler partially unrolls the loop and 256ms becomes a compile-time constant that triggers the check in udelay(): ld.lld: error: undefined symbol: __bad_udelay >>> referenced by applesmc.c >>> hwmon/applesmc.o:(read_smc) in archive drivers/built-in.a I can see no reason against using a sleeping function here, as no part of the driver runs in atomic context, so instead use usleep_range() with a wide range and use jiffies for the end condition. Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2020-05-27x86: Hide the archdata.iommu field behind generic IOMMU_APIKrzysztof Kozlowski1-1/+1
There is a generic, kernel wide configuration symbol for enabling the IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including INTEL_IOMMU and AMD_IOMMU driver) select it so use it here as well. This makes the conditional archdata.iommu field consistent with other platforms and also fixes any compile test builds of other IOMMU drivers, when INTEL_IOMMU or AMD_IOMMU are not selected). For the case when INTEL_IOMMU/AMD_IOMMU and COMPILE_TEST are not selected, this should create functionally equivalent code/choice. With COMPILE_TEST this field could appear if other IOMMU drivers are chosen but neither INTEL_IOMMU nor AMD_IOMMU are not. Reported-by: kbuild test robot <[email protected]> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Borislav Petkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-05-27ia64: Hide the archdata.iommu field behind generic IOMMU_APIKrzysztof Kozlowski1-1/+1
There is a generic, kernel wide configuration symbol for enabling the IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including INTEL_IOMMU driver) select it so use it here as well. This makes the conditional archdata.iommu field consistent with other platforms and also fixes any compile test builds of other IOMMU drivers, when INTEL_IOMMU is not selected). For the case when INTEL_IOMMU and COMPILE_TEST are not selected, this should create functionally equivalent code/choice. With COMPILE_TEST this field could appear if other IOMMU drivers are chosen but INTEL_IOMMU not. Reported-by: kbuild test robot <[email protected]> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2020-05-27Merge tag 'gpio-fixes-for-v5.7' of ↵Linus Walleij3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.7 - fix mutex and spinlock ordering in gpio-mlxbf2 - fix the return value checks on devm_platform_ioremap_resource in gpio-pxa and gpio-bcm-kona
2020-05-27netfilter: nf_conntrack_pptp: fix compilation warning with W=1 buildPablo Neira Ayuso2-2/+2
>> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] extern const char *const pptp_msg_name(u_int16_t msg); ^~~~~~ Reported-by: kbuild test robot <[email protected]> Fixes: 4c559f15efcc ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-05-27netfilter: conntrack: comparison of unsigned in cthelper confirmationPablo Neira Ayuso1-1/+1
net/netfilter/nf_conntrack_core.c: In function nf_confirm_cthelper: net/netfilter/nf_conntrack_core.c:2117:15: warning: comparison of unsigned expression in < 0 is always false [-Wtype-limits] 2117 | if (protoff < 0 || (frag_off & htons(~0x7)) != 0) | ^ ipv6_skip_exthdr() returns a signed integer. Reported-by: Colin Ian King <[email protected]> Fixes: 703acd70f249 ("netfilter: nfnetlink_cthelper: unbreak userspace helper support") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-05-27netfilter: conntrack: Pass value of ctinfo to __nf_conntrack_updateNathan Chancellor1-3/+3
Clang warns: net/netfilter/nf_conntrack_core.c:2068:21: warning: variable 'ctinfo' is uninitialized when used here [-Wuninitialized] nf_ct_set(skb, ct, ctinfo); ^~~~~~ net/netfilter/nf_conntrack_core.c:2024:2: note: variable 'ctinfo' is declared here enum ip_conntrack_info ctinfo; ^ 1 warning generated. nf_conntrack_update was split up into nf_conntrack_update and __nf_conntrack_update, where the assignment of ctinfo is in nf_conntrack_update but it is used in __nf_conntrack_update. Pass the value of ctinfo from nf_conntrack_update to __nf_conntrack_update so that uninitialized memory is not used and everything works properly. Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again") Link: https://github.com/ClangBuiltLinux/linux/issues/1039 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-05-27ceph: flush release queue when handling caps for unknown inodeJeff Layton1-1/+1
It's possible for the VFS to completely forget about an inode, but for it to still be sitting on the cap release queue. If the MDS sends the client a cap message for such an inode, it just ignores it today, which can lead to a stall of up to 5s until the cap release queue is flushed. If we get a cap message for an inode that can't be located, then go ahead and flush the cap release queue. Cc: [email protected] URL: https://tracker.ceph.com/issues/45532 Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped") Reported-and-Tested-by: Andrej Filipčič <[email protected]> Suggested-by: Yan, Zheng <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-05-27libceph: ignore pool overlay and cache logic on redirectsJerry Lee1-1/+3
OSD client should ignore cache/overlay flag if got redirect reply. Otherwise, the client hangs when the cache tier is in forward mode. [ idryomov: Redirects are effectively deprecated and no longer used or tested. The original tiering modes based on redirects are inherently flawed because redirects can race and reorder, potentially resulting in data corruption. The new proxy and readproxy tiering modes should be used instead of forward and readforward. Still marking for stable as obviously correct, though. ] Cc: [email protected] URL: https://tracker.ceph.com/issues/23296 URL: https://tracker.ceph.com/issues/36406 Signed-off-by: Jerry Lee <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-05-27ALSA: hda/realtek - Add new codec supported for ALC287Kailang Yang1-0/+3
Enable new codec supported for ALC287. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-05-26hwmon: (nct7904) Set default timeoutYuechao Zhao1-4/+4
The timeout module parameter should not be used for setting the default timeout. Because, if you set the timeout = 0, the default timeout will be meaningless. And the timeout module parameter of 0 means "no timeout module parameter specified". Signed-off-by: Yuechao Zhao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2020-05-26crypto: chelsio/chtls: properly set tp->lsndtimeEric Dumazet1-1/+1
TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp() Fixes: 36bedb3f2e5b ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Eric Dumazet <[email protected]> Cc: Ayush Sawal <[email protected]> Cc: Vinay Kumar Yadav <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-26Input: synaptics - add a second working PNP_ID for Lenovo T470sDennis Kadioglu1-0/+1
The Lenovo Thinkpad T470s I own has a different touchpad with "LEN007a" instead of the already included PNP ID "LEN006c". However, my touchpad seems to work well without any problems using RMI. So this patch adds the other PNP ID. Signed-off-by: Dennis Kadioglu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-05-27ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audioTakashi Iwai2-0/+44
Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices, a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC (USB ID 0414:a000). The latter serves solely for the headphone output on the front panel while the former serves for the rest I/Os (mostly for the I/Os in the rear panel but also including the front mic). Both chips do work more or less with the unmodified USB-audio driver, but there are a few glitches. The ALC1220-VB returns an error for an inquiry to some jacks, as already seen on other TRX40-based mobos. However this machine has a slightly incompatible configuration, hence the existing mapping cannot be used as is. Meanwhile the ESS chip seems working without any quirk. But since both audio devices don't provide any specific names, both cards appear as "USB-Audio", and it's quite confusing for users. This patch is an attempt to overcome those issues: - The specific mapping table for ALC1220-VB is provided, reducing the non-working nodes and renaming the badly chosen controls. The connector map isn't needed here unlike other TRX40 quirks. - For both USB IDs (0414:a000 and 0414:a001), provide specific card name strings, so that user-space can identify more easily; and more importantly, UCM profile can be applied to each. Reported-by: Linus Torvalds <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-05-26net: sctp: Fix spelling in Kconfig helpChris Packham1-1/+1
Change 'handeled' to 'handled' in the Kconfig help for SCTP. Signed-off-by: Chris Packham <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-26Merge branch 'bnxt_en-Bug-fixes'David S. Miller3-20/+10
Michael Chan says: ==================== bnxt_en: Bug fixes. 3 bnxt_en driver fixes, covering a bug in preserving the counters during some resets, proper error code when flashing NVRAM fails, and an endian bug when extracting the firmware response message length. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-05-26bnxt_en: fix firmware message length endiannessEdwin Peer2-15/+4
The explicit mask and shift is not the appropriate way to parse fields out of a little endian struct. The length field is internally __le16 and the strategy employed only happens to work on little endian machines because the offset used is actually incorrect (length is at offset 6). Also remove the related and no longer used definitions from bnxt.h. Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.") Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-26bnxt_en: Fix return code to "flash_device".Vasundhara Volam1-4/+5
When NVRAM directory is not found, return the error code properly as per firmware command failure instead of the hardcode -ENOBUFS. Fixes: 3a707bed13b7 ("bnxt_en: Return -EAGAIN if fw command returns BUSY") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-26bnxt_en: Fix accumulation of bp->net_stats_prev.Michael Chan1-1/+1
We have logic to maintain network counters across resets by storing the counters in bp->net_stats_prev before reset. But not all resets will clear the counters. Certain resets that don't need to change the number of rings do not clear the counters. The current logic accumulates the counters before all resets, causing big jumps in the counters after some resets, such as ethtool -G. Fix it by only accumulating the counters during reset if the irq_re_init parameter is set. The parameter signifies that all rings and interrupts will be reset and that means that the counters will also be reset. Reported-by: Vijayendra Suman <[email protected]> Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-26net: usb: qmi_wwan: add Telit LE910C1-EUX compositionDaniele Palmas1-0/+1
Add support for Telit LE910C1-EUX composition 0x1031: tty, tty, tty, rmnet Signed-off-by: Daniele Palmas <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.