aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-08-22drm/msm: Add a helper function for in-kernel buffer allocationsJordan Crouse6-54/+72
Nearly all of the buffer allocations for kernel allocate an buffer object, virtual address and GPU iova at the same time. Make a helper function to handle the details. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [dropped msm_fbdev conversion to new helper, since it interferes with display-handover work, where we want to separate allocation and mapping] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-22drm/msm: Attach the GPU MMU when it is createdJordan Crouse3-55/+62
Currently the GPU MMU is attached in the adreno_gpu code but as more and more of the GPU initialization moves to the generic GPU path we have a need to map and use GPU memory earlier and earlier. There isn't any reason to defer attaching the MMU until later so attach it right after the address space is created so it can be used immediately. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm: Add A5XX hardware fault detectionJordan Crouse1-0/+26
The A5XX GPU has really good hardware fault detection that can detect a abnormal hardware condition and fire an interrupt in a matter of milliseconds which is a lot better than waiting for the hangcheck timer. Enable the interrupt and log information before kicking off recovery. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm: Remove uneeded platform dev membersJordan Crouse6-9/+1
Commit eeb754746b14 ("drm/msm/gpu: use pm-runtime") adds a pointer for the GPU platform device to the msm_gpu struct so we can happily remove the same pointers from the individual GPU structs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/mdp5: Set up runtime PM for MDSSArchit Taneja3-8/+86
MDSS represents the top level wrapper that contains MDP5, DSI, HDMI and other sub-blocks. W.r.t device heirarchy, it's the parent of all these devices. The power domain of this device is actually tied to the GDSC hw. When any sub-device enables its PD, MDSS's PD is also enabled. The suspend/resume ops enable the top level clocks that end at the MDSS boundary. For now, we're letting them all be optional, since the child devices anyway hold a ref to these clocks. Until now, we'd called a runtime_get() during probe, which ensured that the GDSC was always on. Now that we've set up runtime PM for the children devices, we can get rid of this hack. Note: that the MDSS device is the platform_device in msm_drv.c. The msm_runtime_suspend/resume ops call the funcs that enable/disable the top level MDSS clocks. This is different from MDP4, where the platform device created in msm_drv.c represents MDP4 itself. It would have been nicer to hide these differences by adding new kms funcs, but runtime PM needs to be enabled before kms is set up (i.e, msm_kms_init is called). Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/mdp5: Write to SMP registers even if allocations don't changeArchit Taneja1-8/+51
Requests for assigning/freeing SMP blocks by planes are collected during the atomic check phase, and represented by mdp5_smp_state's 'assigned' and 'released' members. Once the atomic state is committed, these members are reset to 0, indicating that the existing configuration satisfies all the planes. Future atomic commits will copy the old mdp5_smp_state, and the 'assigned' and 'released' members would be updated only if there was a change in the plane configurations. When we disable and re-enable display, we lose the values we wrote to the SMP registers, but the code doesn't program the registers because there isn't any change in mdp5_smp_state. Fix this by writing to the registers irrespective of whether there was a change in SMP state or not. We do this by keeping a cache of the register values, and write them every time we commit a state. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/mdp5: Don't use mode_set helper funcs for encoders and CRTCsArchit Taneja2-2/+7
We shouldn't use use mode_set/mode_set_nofb helpers when we use runtime PM. The registers configured in these funcs lose their state when we eventually enable the display pipeline. Do not implement these vfuncs in the helpers, and call them in the crtc_enable/encoder_enable paths instead. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/dsi: Implement RPM suspend/resume callbacksArchit Taneja3-41/+49
The bus clocks are always enabled/disabled along with the power domain, so move it to the runtime suspend/resume ops. This cleans up the clock code a bit. Get rid of the clk_mutex mutex since it isn't needed. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/dsi: Set up runtime PM for DSIArchit Taneja2-1/+12
Call the pm_runtime_get/put API where we need the clocks enabled. The main entry/exit points are 1) enabling/disabling the DSI bridge and 2) Sending commands from the DSI host to the device. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/hdmi: Set up runtime PM for HDMIArchit Taneja3-19/+50
Enable rudimentary runtime PM in the HDMI driver. We can't really do agressive PM toggling at the moment because we need to leave the hpd clocks enabled all the time. There isn't much benefit of creating suspend/resume ops to toggle clocks either. We just make sure that we configure the power domain in the HDMI bridge's enable/disable paths, and the HDMI connector's detect() op. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-02drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocksArchit Taneja6-36/+78
mdp5_enable/disable calls are scattered all around in the MDP5 code. Use the pm_runtime_get/put calls here instead, and populate the runtime PM suspend/resume ops to manage the clocks. About the overall design: MDP5 is a child of the top level MDSS device. MDSS is also the parent to DSI, HDMI and other interfaces. When we enable MDP5's power domain, we end up enabling MDSS's PD too. It is only MDSS's PD that actually controlls the GDSC HW. Therefore, calling runtime_get/put on the MDP5 device is like just requesting a vote to enable/disable the GDSC. Functionally, replacing the clock enable/disable calls with the RPM API can result in the power domain (GDSC) state being toggled if no other child isn't powered on. This can result in the register context being lost. We make sure (in future commits) that code paths don't end up configuring registers and then later lose state, resulting in a bad HW state. For now, we've replaced each mdp5_enable/disable with runtime_get/put API. We could optimize things later by removing runtime_get/put calls which don't really need to be there. This could prevent unnecessary toggling of the power domain and clocks. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: gpu: don't abuse dma_alloc for non-DMA allocationsArnd Bergmann2-51/+23
In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOMArnd Bergmann2-9/+4
When compile-testing for something other than ARCH_QCOM, we run into a link error: drivers/gpu/drm/msm/adreno/a5xx_gpu.o: In function `a5xx_hw_init': a5xx_gpu.c:(.text.a5xx_hw_init+0x600): undefined reference to `qcom_mdt_get_size' a5xx_gpu.c:(.text.a5xx_hw_init+0x93c): undefined reference to `qcom_mdt_load' There is already an #ifdef that tries to check for CONFIG_QCOM_MDT_LOADER, but that symbol is only meaningful when building for ARCH_QCOM. This adds a compile-time check for ARCH_QCOM, and clarifies the Kconfig select statement so we don't even try it for other targets. The check for CONFIG_QCOM_MDT_LOADER can then go away, which also improves compile-time coverage and makes the code a little nicer to read. Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm/adreno: Prevent unclocked access when retrieving timestampsArchit Taneja1-2/+9
msm_gpu's get_timestamp() op (called by the MSM_GET_PARAM ioctl) can result in register accesses. We need our power domain and clocks to be active for that. Make sure they are enabled here. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: Remove __user from __u64 data typesJordan Crouse1-3/+3
__user should be used to identify user pointers and not __u64 variables containing pointers. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: args->fence should be args->flagsJordan Crouse1-1/+1
Fix a typo in msm_ioctl_gem_submit - check args->flags for the MSM_SUBMIT_NO_IMPLICIT flag instead of args->fence. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: Turn off hardware clock gating before reading A5XX registersJordan Crouse1-0/+7
On A5XX GPU hardware clock gating needs to be turned off before reading certain GPU registers via AHB. Turn off HWCG before calling adreno_show() to safely dump all the registers without a system hang. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: Allow hardware clock gating to be toggledJordan Crouse2-33/+10
There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: Remove some potentially blocked register rangesJordan Crouse1-25/+24
The 0xf400 and 0xf800 ranges are in the RBBM_SECVID block which may be protected from CPU access. Skip dumping them since they are minimally useful for debugging and they aren't worth a system hang. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm/mdp5: Drop clock names with "_clk" suffixArchit Taneja1-6/+6
We have upstream bindings (msm8916) that have the "_clk" suffix in the clock names. The downstream bindings also require it. We want to drop the "_clk" suffix and at the same time support existing bindings. Update the MDP5 code with the the msm_clk_get() helper to support both old and new clock names. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm/mdp5: Fix typo in encoder_enable pathArchit Taneja1-1/+1
The mdp5_cmd_encoder_disable is accidentally called in the encoder enable path. We've not seen any problems since we haven't tested with command mode panels in a while. Fix the copy-paste error. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: NULL pointer dereference in drivers/gpu/drm/msm/msm_gem_vma.cHans Verkuil1-1/+1
While I was testing the upcoming adv7533 CEC support with my Dragonboard c410 I encountered this NULL pointer dereference: [ 17.912822] Unable to handle kernel NULL pointer dereference at virtual address 000000e8 [ 17.917191] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800030e9f000 [ 17.925249] [00000000000000e8] *pgd=00000000b0daf003, *pud=0000000000000000 [ 17.931650] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 17.938395] Modules linked in: btqcomsmd btqca arc4 wcn36xx mac80211 bluetooth cfg80211 ecdh_generic r8152 snd_soc_hdmi_codec adv7511 cec qcom_wcnss_pil msm mdt_loader drm_kms_helper msm_rng rng_core drm [ 17.943967] CPU: 0 PID: 1684 Comm: Xorg Tainted: G W 4.13.0-rc1-dragonboard #111 [ 17.962005] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 17.970685] task: ffff800031236c00 task.stack: ffff800033fbc000 [ 17.977582] PC is at msm_gem_unmap_vma+0x20/0x80 [msm] [ 17.983213] LR is at put_iova+0x60/0xb8 [msm] [ 17.988303] pc : [<ffff000000ac2d58>] lr : [<ffff000000ac07c8>] pstate: 20000145 [ 17.992733] sp : ffff800033fbfb30 [ 18.000193] x29: ffff800033fbfb30 x28: ffff800030b5f000 [ 18.003407] x27: 00000000000000b4 x26: ffff0000009f8cd8 [ 18.008789] x25: 0000000000000004 x24: dead000000000100 [ 18.014085] x23: dead000000000200 x22: ffff800030b5fd40 [ 18.019379] x21: ffff800030b5fc00 x20: 0000000000000000 [ 18.024675] x19: ffff80003082bf00 x18: 0000000000000000 [ 18.029970] x17: 0000ffffb3347e70 x16: ffff000008207638 [ 18.035265] x15: 0000000000000053 x14: 0000000000000000 [ 18.040560] x13: 0000000000000038 x12: 0101010101010101 [ 18.045855] x11: 7f7f7f7f7f7f7f7f x10: 0000000000000040 [ 18.051150] x9 : ffff800030b5f038 x8 : ffff800031657b50 [ 18.056446] x7 : ffff800031657b78 x6 : 0000000000000000 [ 18.061740] x5 : 0000000000000000 x4 : 00000000b5c01000 [ 18.067036] x3 : 0000000000000000 x2 : ffff8000337bf300 [ 18.072330] x1 : ffff80003082bf00 x0 : 0000000000000000 [ 18.077629] Process Xorg (pid: 1684, stack limit = 0xffff800033fbc000) [ 18.082925] Stack: (0xffff800033fbfb30 to 0xffff800033fc0000) [ 18.089262] fb20: ffff800033fbfb60 ffff000000ac07c8 [ 18.095081] fb40: ffff80003082bf00 ffff800030b5fc90 ffff800030b5fc00 ffff000000abf4a0 [ 18.102893] fb60: ffff800033fbfba0 ffff000000ac16b0 ffff800030b5fc00 ffff8000338ff870 [ 18.110706] fb80: ffff8000338ff800 ffff800030b5fc00 ffff800030b5fda8 ffff800033fbfd80 [ 18.118518] fba0: ffff800033fbfbe0 ffff0000009d4244 ffff800030b5fc00 ffff800030b5f038 [ 18.126332] fbc0: ffff800033fbfbd0 ffff800030b5fc00 ffff800030b5f038 ffff0000009d4840 [ 18.134144] fbe0: ffff800033fbfbf0 ffff0000009d4858 ffff800033fbfc10 ffff0000009d48e4 [ 18.141955] fc00: ffff800030b5fc00 ffff8000338ffd98 ffff800033fbfc30 ffff0000009d49a4 [ 18.149768] fc20: ffff800030b5fc00 ffff800030b5f000 ffff800033fbfc60 ffff0000009d4a4c [ 18.157581] fc40: ffff800030b5f050 ffff800030b5f000 0000000000000001 ffff800030b5fc00 [ 18.165394] fc60: ffff800033fbfca0 ffff0000009d4ab0 0000000000000018 ffff800030b5f000 [ 18.173206] fc80: ffff0000009efd28 ffff800033fbfd80 ffff8000338ff800 ffff0000009d56a8 [ 18.181019] fca0: ffff800033fbfcb0 ffff0000009efd54 ffff800033fbfcc0 ffff0000009d56c8 [ 18.188831] fcc0: ffff800033fbfd00 ffff0000009d58e0 ffff0000009fa6e0 00000000c00464b4 [ 18.196643] fce0: 0000000000000004 ffff80003082b400 0000ffffea1f0e00 0000000000000000 [ 18.204456] fd00: ffff800033fbfe00 ffff000008206f0c ffff80000335caf8 ffff80003082b400 [ 18.212269] fd20: 0000ffffea1f0e00 ffff80003082b400 00000000c00464b4 0000ffffea1f0e00 [ 18.220081] fd40: 0000000000000124 000000000000001d ffff0000089d2000 ffff800031236c00 [ 18.227894] fd60: ffff800033fbfd80 0000000000000004 ffff0000009efd28 ffff800033fbfd80 [ 18.235706] fd80: 0000000100000001 0000008000000001 0000001800000020 0000000000000001 [ 18.243518] fda0: 0000000100000000 0000000100000001 0000ffff00000000 0000ffff00000000 [ 18.251331] fdc0: 0000000000000124 0000000000000038 ffff0000089d2000 ffff800031236c00 [ 18.259144] fde0: ffff800033fbfe40 ffff000008214124 ffff800033fbfe30 ffff000008203290 [ 18.266956] fe00: ffff800033fbfe80 ffff0000082076b4 0000000000000000 ffff800030d8a000 [ 18.274768] fe20: ffff80003082b400 0000000000000016 ffff800033fbfe50 ffff0000081f0488 [ 18.282581] fe40: ffff800033fbfe80 ffff000008207678 0000000000000000 ffff80003082b400 [ 18.290393] fe60: ffff800033fbfe70 ffff0000082138b0 ffff800033fbfe80 ffff000008207658 [ 18.298207] fe80: 0000000000000000 ffff000008082f84 0000000000000000 0000800034a16000 [ 18.306017] fea0: ffffffffffffffff 0000ffffb3347e7c 0000000000000000 0000000000000015 [ 18.313832] fec0: 0000000000000016 00000000c00464b4 0000ffffea1f0e00 0000000000000001 [ 18.321643] fee0: 0000000000000020 0000000000000080 0000000000000001 0000000000000000 [ 18.329456] ff00: 000000000000001d 000000012692c5b0 0101010101010101 7f7f7f7f7f7f7f7f [ 18.337269] ff20: 0101010101010101 0000000000000038 0000000000000000 0000000000000053 [ 18.345082] ff40: 0000ffffb368b2b8 0000ffffb3347e70 0000000000000000 0000ffffb3847000 [ 18.352894] ff60: 0000ffffea1f0e00 00000000c00464b4 0000000000000016 0000ffffea1f0edc [ 18.360705] ff80: 000000012692ad20 0000000000000003 00000001214282e4 0000000121428388 [ 18.368518] ffa0: 0000000000000000 0000ffffea1f0da0 0000ffffb367185c 0000ffffea1f0da0 [ 18.376332] ffc0: 0000ffffb3347e7c 0000000000000000 0000000000000016 000000000000001d [ 18.384142] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 18.391953] Call trace: [ 18.399760] Exception stack(0xffff800033fbf950 to 0xffff800033fbfa80) [ 18.402023] f940: ffff80003082bf00 0001000000000000 [ 18.408622] f960: ffff800033fbfb30 ffff000000ac2d58 0000000020000145 ffff8000338ffa78 [ 18.416435] f980: 0000000000000000 0000000000000000 ffff800033fbf9e0 ffff0000089afcf0 [ 18.424248] f9a0: ffff80000348f230 ffff8000338ffa78 0000000000000000 0000000000000000 [ 18.432060] f9c0: ffff8000338ffaa8 0000000000000001 ffff800033fbfb80 ffff0000009e8f38 [ 18.439872] f9e0: ffff800033fbfa10 ffff0000089a9ff8 0000000000000027 ffff80003082b918 [ 18.447684] fa00: 0000000000000000 ffff80003082bf00 ffff8000337bf300 0000000000000000 [ 18.455497] fa20: 00000000b5c01000 0000000000000000 0000000000000000 ffff800031657b78 [ 18.463310] fa40: ffff800031657b50 ffff800030b5f038 0000000000000040 7f7f7f7f7f7f7f7f [ 18.471122] fa60: 0101010101010101 0000000000000038 0000000000000000 0000000000000053 [ 18.479062] [<ffff000000ac2d58>] msm_gem_unmap_vma+0x20/0x80 [msm] [ 18.486862] [<ffff000000ac07c8>] put_iova+0x60/0xb8 [msm] [ 18.492938] [<ffff000000ac16b0>] msm_gem_free_object+0x60/0x198 [msm] [ 18.498432] [<ffff0000009d4244>] drm_gem_object_free+0x1c/0x58 [drm] [ 18.504854] [<ffff0000009d4858>] drm_gem_object_put_unlocked+0x90/0xa0 [drm] [ 18.511273] [<ffff0000009d48e4>] drm_gem_object_handle_put_unlocked+0x64/0xd0 [drm] [ 18.518300] [<ffff0000009d49a4>] drm_gem_object_release_handle+0x54/0x98 [drm] [ 18.525679] [<ffff0000009d4a4c>] drm_gem_handle_delete+0x64/0xb8 [drm] [ 18.532968] [<ffff0000009d4ab0>] drm_gem_dumb_destroy+0x10/0x18 [drm] [ 18.539479] [<ffff0000009efd54>] drm_mode_destroy_dumb_ioctl+0x2c/0x40 [drm] [ 18.545992] [<ffff0000009d56c8>] drm_ioctl_kernel+0x68/0xe0 [drm] [ 18.553105] [<ffff0000009d58e0>] drm_ioctl+0x178/0x3b0 [drm] [ 18.558970] [<ffff000008206f0c>] do_vfs_ioctl+0xa4/0x7d0 [ 18.564694] [<ffff0000082076b4>] SyS_ioctl+0x7c/0x98 [ 18.569992] [<ffff000008082f84>] el0_svc_naked+0x38/0x3c [ 18.574941] Code: a90153f3 aa0003f4 f90013f5 aa0103f3 (f9407400) [ 18.580502] ---[ end trace b1ac6888ec40b0be ]--- It turns out that the aspace argument in msm_gem_unmap_vma() is NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [Note: this case gets hit with !IOMMU config] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: fix WARN_ON in add_vma() with no iommuHans Verkuil1-0/+4
While I was testing the upcoming adv7533 CEC support with my Dragonboard c410 I encountered this warning several times during boot: [ 4.408309] WARNING: CPU: 3 PID: 1347 at drivers/gpu/drm/msm/msm_gem.c:312 add_vma+0x78/0x88 [msm] [ 4.412951] Modules linked in: snd_soc_hdmi_codec adv7511 cec qcom_wcnss_pil msm mdt_loader drm_kms_helper msm_rng rng_core drm [ 4.421728] CPU: 3 PID: 1347 Comm: kworker/3:3 Not tainted 4.13.0-rc1-dragonboard #111 [ 4.433090] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 4.441081] Workqueue: events deferred_probe_work_func [ 4.447929] task: ffff800031243600 task.stack: ffff800003394000 [ 4.453023] PC is at add_vma+0x78/0x88 [msm] [ 4.458823] LR is at _msm_gem_new+0xd4/0x188 [msm] [ 4.463207] pc : [<ffff000000ac01f8>] lr : [<ffff000000ac06b4>] pstate: 40000145 [ 4.467811] sp : ffff8000033978a0 [ 4.475357] x29: ffff8000033978a0 x28: ffff8000031dea18 [ 4.478572] x27: ffff800003933a00 x26: ffff800003b39800 [ 4.483953] x25: ffff8000338ff800 x24: 0000000000000001 [ 4.489249] x23: 0000000000000000 x22: ffff800003b39800 [ 4.494544] x21: ffff8000338ff800 x20: 0000000000000000 [ 4.499839] x19: ffff800003932600 x18: 0000000000000001 [ 4.505135] x17: 0000ffff8969e9e0 x16: ffff7e00000ce7a0 [ 4.510429] x15: ffffffffffffffff x14: ffff8000833977ef [ 4.515724] x13: ffff8000033977f3 x12: 0000000000000038 [ 4.521020] x11: 0101010101010101 x10: ffffff7f7fff7f7f [ 4.526315] x9 : 0000000000000000 x8 : ffff800003932800 [ 4.531633] x7 : 0000000000000000 x6 : 000000000000003f [ 4.531644] x5 : 0000000000000040 x4 : 0000000000000000 [ 4.531650] x3 : ffff800031243600 x2 : 0000000000000000 [ 4.531655] x1 : 0000000000000000 x0 : 0000000000000000 [ 4.531670] Call trace: [ 4.531676] Exception stack(0xffff8000033976c0 to 0xffff8000033977f0) [ 4.531683] 76c0: ffff800003932600 0001000000000000 ffff8000033978a0 ffff000000ac01f8 [ 4.531688] 76e0: 0000000000000140 0000000000000000 ffff800003932550 ffff800003397780 [ 4.531694] 7700: ffff800003397730 ffff000008261ce8 0000000000000000 ffff8000031d2f80 [ 4.531699] 7720: ffff800003397800 ffff0000081d671c 0000000000000140 0000000000000000 [ 4.531705] 7740: ffff000000ac04c0 0000000000004003 ffff800003397908 00000000014080c0 [ 4.531710] 7760: 0000000000000000 ffff800003b39800 0000000000000000 0000000000000000 [ 4.531716] 7780: 0000000000000000 ffff800031243600 0000000000000000 0000000000000040 [ 4.531721] 77a0: 000000000000003f 0000000000000000 ffff800003932800 0000000000000000 [ 4.531726] 77c0: ffffff7f7fff7f7f 0101010101010101 0000000000000038 ffff8000033977f3 [ 4.531730] 77e0: ffff8000833977ef ffffffffffffffff [ 4.531881] [<ffff000000ac01f8>] add_vma+0x78/0x88 [msm] [ 4.532011] [<ffff000000ac06b4>] _msm_gem_new+0xd4/0x188 [msm] [ 4.532134] [<ffff000000ac1900>] msm_gem_new+0x10/0x18 [msm] [ 4.532260] [<ffff000000acb274>] msm_dsi_host_modeset_init+0x17c/0x268 [msm] [ 4.532384] [<ffff000000ac9024>] msm_dsi_modeset_init+0x34/0x1b8 [msm] [ 4.532504] [<ffff000000ab6168>] modeset_init+0x408/0x488 [msm] [ 4.532623] [<ffff000000ab6c4c>] mdp5_kms_init+0x2b4/0x338 [msm] [ 4.532745] [<ffff000000abeff8>] msm_drm_bind+0x218/0x4e8 [msm] [ 4.532755] [<ffff00000855d744>] try_to_bring_up_master+0x1f4/0x318 [ 4.532762] [<ffff00000855d900>] component_add+0x98/0x180 [ 4.532887] [<ffff000000ac8da0>] dsi_dev_probe+0x18/0x28 [msm] [ 4.532895] [<ffff000008565fe8>] platform_drv_probe+0x58/0xc0 [ 4.532901] [<ffff00000856410c>] driver_probe_device+0x324/0x458 [ 4.532907] [<ffff00000856440c>] __device_attach_driver+0xac/0x170 [ 4.532913] [<ffff000008561ef4>] bus_for_each_drv+0x4c/0x98 [ 4.532918] [<ffff000008563c38>] __device_attach+0xc0/0x160 [ 4.532924] [<ffff000008564530>] device_initial_probe+0x10/0x18 [ 4.532929] [<ffff000008562f84>] bus_probe_device+0x94/0xa0 [ 4.532934] [<ffff0000085635d4>] deferred_probe_work_func+0x8c/0xe8 [ 4.532941] [<ffff0000080d79bc>] process_one_work+0x1d4/0x330 [ 4.532946] [<ffff0000080d7b60>] worker_thread+0x48/0x468 [ 4.532952] [<ffff0000080ddae4>] kthread+0x12c/0x130 [ 4.532958] [<ffff000008082f10>] ret_from_fork+0x10/0x40 [ 4.532962] ---[ end trace b1ac6888ec40b0bb ]--- Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm/dsi: Calculate link clock rates with updated dsi->lanesArchit Taneja1-7/+7
After the commit mentioned below, we start computing the byte and pixel clocks (dsi_calc_clk_rate) in the DSI bridge's mode_set() op. The calculation involves the number of DSI lanes being used by the downstream bridge/panel. If the downstream bridge/panel tries to change the number of DSI lanes (as done in the ADV7533 driver) in its mode_set() op, then our DSI host driver will not have the correct number of lanes when computing byte/pixel clocks. Fix this by delaying the clock rate calculation in the DSI bridge enable path. In particular, compute the clock rates in msm_dsi_host_get_phy_clk_req(). This fixes the DSI host error interrupts seen when we try to switch between modes that require different number of lanes (4 to 3 lanes, or vice versa) on db410c. The error interrupts occur since the byte/pixel clock rates aren't according to what the DSI video mode timing engine expects. Fixes: b62aa70a98c5 ("drm/msm/dsi: Move PHY operations out of host") Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm/mdp5: fix unclocked register access in _cursor_set()Rob Clark1-0/+8
Fixes an insta-reboot when screen-blanking kicks in, due to cursor updates without clocks enabled. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: unlock on error in msm_gem_get_iova()Dan Carpenter1-3/+5
We recently added locking to this function but there was a direct return that was overlooked where we need to unlock. Fixes: 0e08270a1f01 ("drm/msm: Separate locking of buffer resources from struct_mutex") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm: fix an integer overflow testDan Carpenter1-2/+2
We recently added an integer overflow check but it needs an additional tweak to work properly on 32 bit systems. The problem is that we're doing the right hand side of the assignment as type unsigned long so the max it will have an integer overflow instead of being larger than SIZE_MAX. That means the "sz > SIZE_MAX" condition is never true even on 32 bit systems. We need to first cast it to u64 and then do the math. Fixes: 4a630fadbb29 ("drm/msm: Fix potential buffer overflow issue") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-08-01drm/msm/mdp5: Fix compilation warningsViresh Kumar2-4/+4
Following compilation warnings were observed for these files: CC [M] drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.o drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c: In function 'blend_setup': drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: missing braces around initializer [-Wmissing-braces] enum mdp5_pipe stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: (near initialization for 'stage[0]') [-Wmissing-braces] drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: missing braces around initializer [-Wmissing-braces] enum mdp5_pipe r_stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: (near initialization for 'r_stage[0]') [-Wmissing-braces] drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c: In function 'mdp5_plane_mode_set': drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: missing braces around initializer [-Wmissing-braces] struct phase_step step = { 0 }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: (near initialization for 'step.x') [-Wmissing-braces] drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: missing braces around initializer [-Wmissing-braces] struct pixel_ext pe = { 0 }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: (near initialization for 'pe.left') [-Wmissing-braces] This happens because in the first case we were initializing a two dimensional array with {0} and in the second case we were initializing a struct containing two arrays with {0}. Fix them by adding another pair of {}. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-30Linux 4.13-rc3Linus Torvalds1-1/+1
2017-07-30Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of x86 fixes: - prevent the kernel from using the EFI reboot method when EFI is disabled. - two patches addressing clang issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable the address-of-packed-member compiler warning x86/efi: Fix reboot_mode when EFI runtime services are disabled x86/boot: #undef memcpy() et al in string.c
2017-07-30Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two patches addressing build warnings caused by inconsistent kernel doc comments" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/wait: Clean up some documentation warnings sched/core: Fix some documentation build warnings
2017-07-30Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-11/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A couple of fixes for performance counters and kprobes: - a series of small patches which make the uncore performance counters on Skylake server systems work correctly - add a missing instruction slot release to the failure path of kprobes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes/x86: Release insn_slot in failure path perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs perf/x86/intel/uncore: Fix SKX CHA event extra regs perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask perf/x86/intel/uncore: Fix Skylake server PCU PMU event format perf/x86/intel/uncore: Fix Skylake UPI PMU event masks
2017-07-30Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "Fix for a regression caused by the conversion of x86 to the generic hotplug code. Instead of doing a plain single line revert, this adds a pile of comments so the semantics of the force argument are clear" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"
2017-07-28Merge tag 'devicetree-fixes-for-4.13' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: "Two small DT fixes: - Fix error handling in of_irq_to_resource_table() due to of_irq_to_resource() error return changes. - Fix dtx_diff script due to dts include path changes" * tag 'devicetree-fixes-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: irq: fix of_irq_to_resource() error check scripts/dtc: dtx_diff - update include dts paths to match build
2017-07-28Merge tag 'nfs-for-4.13-3' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds2-6/+12
Pull NFS client fixes from Anna Schumaker: "More NFS client bugfixes for 4.13. Most of these fix locking bugs that Ben and Neil noticed, but I also have a patch to fix one more access bug that was reported after last week. Stable fixes: - Fix a race where CB_NOTIFY_LOCK fails to wake a waiter - Invalidate file size when taking a lock to prevent corruption Other fixes: - Don't excessively generate tiny writes with fallocate - Use the raw NFS access mask in nfs4_opendata_access()" * tag 'nfs-for-4.13-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter NFS: Optimize fallocate by refreshing mapping when needed. NFS: invalidate file size when taking a lock. NFS: Use raw NFS access mask in nfs4_opendata_access()
2017-07-28Merge tag 'xfs-4.13-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds6-3/+39
Pull xfs fixes from Darrick Wong: - fix firstfsb variables that we left uninitialized, which could lead to locking problems. - check for NULL metadata buffer pointers before using them. - don't allow btree cursor manipulation if the btree block is corrupt. Better to just shut down. - fix infinite loop problems in quotacheck. - fix buffer overrun when validating directory blocks. - fix deadlock problem in bunmapi. * tag 'xfs-4.13-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix multi-AG deadlock in xfs_bunmapi xfs: check that dir block entries don't off the end of the buffer xfs: fix quotacheck dquot id overflow infinite loop xfs: check _alloc_read_agf buffer pointer before using xfs: set firstfsb to NULLFSBLOCK before feeding it to _bmapi_write xfs: check _btree_check_block value
2017-07-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds16-49/+99
Pull KVM fixes from Paolo Bonzini: "s390: - SRCU fix PPC: - host crash fixes x86: - bugfixes, including making nested posted interrupts really work Generic: - tweaks to kvm_stat and to uevents" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: LAPIC: Fix reentrancy issues with preempt notifiers tools/kvm_stat: add '-f help' to get the available event list tools/kvm_stat: use variables instead of hard paths in help output KVM: nVMX: Fix loss of L2's NMI blocking state KVM: nVMX: Fix posted intr delivery when vcpu is in guest mode x86: irq: Define a global vector for nested posted interrupts KVM: x86: do mask out upper bits of PAE CR3 KVM: make pid available for uevents without debugfs KVM: s390: take srcu lock when getting/setting storage keys KVM: VMX: remove unused field KVM: PPC: Book3S HV: Fix host crash on changing HPT size KVM: PPC: Book3S HV: Enable TM before accessing TM registers
2017-07-28Merge tag 'for-linus-4.13b-rc3-tag' of ↵Linus Torvalds3-13/+5
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Three minor cleanups for xen related drivers" * tag 'for-linus-4.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: dont fiddle with event channel masking in suspend/resume xen: selfballoon: remove unnecessary static in frontswap_selfshrink() xen: Drop un-informative message during boot
2017-07-28Merge tag 'arm64-fixes' of ↵Linus Torvalds15-61/+84
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I'd been collecting these whilst we debugged a CPU hotplug failure, but we ended up diagnosing that one to tglx, who has taken a fix via the -tip tree separately. We're seeing some NFS issues that we haven't gotten to the bottom of yet, and we've uncovered some issues with our backtracing too so there might be another fixes pull before we're done. Summary: - Ensure we have a guard page after the kernel image in vmalloc - Fix incorrect prefetch stride in copy_page - Ensure irqs are disabled in die() - Fix for event group validation in QCOM L2 PMU driver - Fix requesting of PMU IRQs on AMD Seattle - Minor cleanups and fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mmu: Place guard page after mapping of kernel image drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPU arm64: sysreg: Fix unprotected macro argmuent in write_sysreg perf: qcom_l2: fix column exclusion check arm64/lib: copy_page: use consistent prefetch stride arm64/numa: Drop duplicate message perf: Convert to using %pOF instead of full_name arm64: Convert to using %pOF instead of full_name arm64: traps: disable irq in die() arm64: atomics: Remove '&' from '+&' asm constraint in lse atomics arm64: uaccess: Remove redundant __force from addr cast in __range_ok
2017-07-28Merge tag 'powerpc-4.13-4' of ↵Linus Torvalds9-36/+168
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "The highlight is Ben's patch to work around a host killing bug when running KVM guests with the Radix MMU on Power9. See the long change log of that commit for more detail. And then three fairly minor fixes: - fix of_node_put() underflow during reconfig remove, using old DLPAR tools. - fix recently introduced ld version check with 64-bit LE-only toolchain. - free the subpage_prot_table correctly, avoiding a memory leak. Thanks to: Aneesh Kumar K.V, Benjamin Herrenschmidt, Laurent Vivier" * tag 'powerpc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/hash: Free the subpage_prot_table correctly powerpc/Makefile: Fix ld version check with 64-bit LE-only toolchain powerpc/pseries: Fix of_node_put() underflow during reconfig remove powerpc/mm/radix: Workaround prefetch issue with KVM
2017-07-28NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiterBenjamin Coddington1-1/+1
nfs4_retry_setlk() sets the task's state to TASK_INTERRUPTIBLE within the same region protected by the wait_queue's lock after checking for a notification from CB_NOTIFY_LOCK callback. However, after releasing that lock, a wakeup for that task may race in before the call to freezable_schedule_timeout_interruptible() and set TASK_WAKING, then freezable_schedule_timeout_interruptible() will set the state back to TASK_INTERRUPTIBLE before the task will sleep. The result is that the task will sleep for the entire duration of the timeout. Since we've already set TASK_INTERRUPTIBLE in the locked section, just use freezable_schedule_timout() instead. Fixes: a1d617d8f134 ("nfs: allow blocking locks to be awoken by lock callbacks") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-07-28Merge branch 'linus' of ↵Linus Torvalds6-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - remove broken dt bindings in inside-secure - fix authencesn crash when used with digest_null - fix cavium/nitrox firmware path - fix SHA3 failure in brcm - fix Kconfig dependency for brcm * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: authencesn - Fix digest_null crash crypto: brcm - remove BCM_PDC_MBOX dependency in Kconfig Documentation/bindings: crypto: remove the dma-mask property crypto: inside-secure - do not parse the dma mask from dt crypto: cavium/nitrox - Change in firmware path. crypto: brcm - Fix SHA3-512 algorithm failure
2017-07-28Merge branch 'for-4.13-part3' of ↵Linus Torvalds3-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Fixes addressing problems reported by users, and there's one more regression fix" * 'for-4.13-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: round down size diff when shrinking/growing device Btrfs: fix early ENOSPC due to delalloc btrfs: fix lockup in find_free_extent with read-only block groups Btrfs: fix dir item validation when replaying xattr deletes
2017-07-28Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds6-126/+115
Pull MD fixes from Shaohua Li: "This fixes several bugs, three of them are marked for stable: - an initialization issue fixed by Ming - a bio clone race issue fixed by me - an async tx flush issue fixed by Ofer - other cleanups" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: fix warnning for UP case md/raid5: add thread_group worker async_tx_issue_pending_all md: simplify code with bio_io_error md/raid1: fix writebehind bio clone md: raid1-10: move raid1/raid10 common code into raid1-10.c md: raid1/raid10: initialize bvec table via bio_add_page() md: remove 'idx' from 'struct resync_pages'
2017-07-28Merge tag 'for-4.13/dm-fixes' of ↵Linus Torvalds11-46/+94
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a few DM integrity fixes that improve performance. One that address inefficiencies in the on-disk journal device layout. Another that makes use of the block layer's on-stack plugging when writing the journal. - a dm-bufio fix for the blk_status_t conversion that went in during the merge window. - a few DM raid fixes that address correctness when suspending the device and a validation fix for validation that occurs during device activation. - a couple DM zoned target fixes. Important one being the fix to not use GFP_KERNEL in the IO path due to concerns about deadlock in low-memory conditions (e.g. swap over a DM zoned device, etc). - a DM DAX device fix to make sure dm_dax_flush() is called if the underlying DAX device is operating as a write cache. * tag 'for-4.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm, dax: Make sure dm_dax_flush() is called if device supports it dm verity fec: fix GFP flags used with mempool_alloc() dm zoned: use GFP_NOIO in I/O path dm zoned: remove test for impossible REQ_OP_FLUSH conditions dm raid: bump target version dm raid: avoid mddev->suspended access dm raid: fix activation check in validate_raid_redundancy() dm raid: remove WARN_ON() in raid10_md_layout_to_format() dm bufio: fix error code in dm_bufio_write_dirty_buffers() dm integrity: test for corrupted disk format during table load dm integrity: WARN_ON if variables representing journal usage get out of sync dm integrity: use plugging when writing the journal dm integrity: fix inefficient allocation of journal space
2017-07-28Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds13-138/+197
Pull block fixes from Jens Axboe: "A small collection of fixes that should go into this series. This contains: - NVMe pull request from Christoph, with various fixes for nvme proper and nvme-fc. - disable runtime PM for blk-mq for now. With scsi now defaulting to using blk-mq, this reared its head as an issue. Longer term we'll fix up runtime PM for blk-mq, for now just disable it to prevent a hang on laptop resume for some folks. - blk-mq CPU <-> hw queue map fix from Christoph. - xen/blkfront pull request from Konrad, with two small fixes for the blkfront driver. - a few fixups for nbd from Joseph. - a stable fix for pblk from Javier" * 'for-linus' of git://git.kernel.dk/linux-block: lightnvm: pblk: advance bio according to lba index nvme: validate admin queue before unquiesce nbd: clear disconnected on reconnect nvme-pci: fix HMB size calculation nvme-fc: revise TRADDR parsing nvme-fc: address target disconnect race conditions in fcp io submit nvme: fabrics commands should use the fctype field for data direction nvme: also provide a UUID in the WWID sysfs attribute xen/blkfront: always allocate grants first from per-queue persistent grants xen-blkfront: fix mq start/stop race blk-mq: map queues to all present CPUs block: disable runtime-pm for blk-mq xen-blkfront: Fix handling of non-supported operations nbd: only set sndtimeo if we have a timeout set nbd: take tx_lock before disconnecting nbd: allow multiple disconnects to be sent
2017-07-28Merge tag 'mmc-v4.13-rc1' of ↵Linus Torvalds11-284/+16
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.13-rc1. I have also included a couple of cleanup patches in this pull request for OMAP2+, related to the omap_hsmmc driver. The reason is because of the changes are also depending on OMAP SoC specific code, so this simplifies how to deal with this. Summary: MMC host: - sunxi: Correct time phase settings - omap_hsmmc: Clean up some dead code - dw_mmc: Fix message printed for deprecated num-slots DT binding - dw_mmc: Fix DT documentation" * tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: Documentation: dw-mshc: deprecate num-slots mmc: dw_mmc: fix the wrong condition check of getting num-slots from DT mmc: host: omap_hsmmc: remove unused platform callbacks ARM: OMAP2+: hsmmc.c: Remove dead code mmc: sunxi: Keep default timing phase settings for new timing mode
2017-07-28lightnvm: pblk: advance bio according to lba indexJavier González3-10/+19
When a lba either hits the cache or corresponds to an empty entry in the L2P table, we need to advance the bio according to the position in which the lba is located. Otherwise, we will copy data in the wrong page, thus causing data corruption for the application. In case of a cache hit, we assumed that bio->bi_iter.bi_idx would contain the correct index, but this is no necessarily true. Instead, use the local bio advance counter and iterator. This guarantees that lbas hitting the cache are copied into the right bv_page. In case of an empty L2P entry, we omitted to advance the bio. In the cases when the same I/O also contains a cache hit, data corresponding to this lba will be copied to the wrong bv_page. Fix this by advancing the bio as we do in the case of a cache hit. Fixes: a4bd217b4326 lightnvm: physical block device (pblk) target Signed-off-by: Javier González <javier@javigon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-28arm64: mmu: Place guard page after mapping of kernel imageWill Deacon1-7/+11
The vast majority of virtual allocations in the vmalloc region are followed by a guard page, which can help to avoid overruning on vma into another, which may map a read-sensitive device. This patch adds a guard page to the end of the kernel image mapping (i.e. following the data/bss segments). Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-28x86/boot: Disable the address-of-packed-member compiler warningMatthias Kaehlcke1-0/+1
The clang warning 'address-of-packed-member' is disabled for the general kernel code, also disable it for the x86 boot code. This suppresses a bunch of warnings like this when building with clang: ./arch/x86/include/asm/processor.h:535:30: warning: taking address of packed member 'sp0' of class or structure 'x86_hw_tss' may result in an unaligned pointer value [-Waddress-of-packed-member] return this_cpu_read_stable(cpu_tss.x86_tss.sp0); ^~~~~~~~~~~~~~~~~~~ ./arch/x86/include/asm/percpu.h:391:59: note: expanded from macro 'this_cpu_read_stable' #define this_cpu_read_stable(var) percpu_stable_op("mov", var) ^~~ ./arch/x86/include/asm/percpu.h:228:16: note: expanded from macro 'percpu_stable_op' : "p" (&(var))); ^~~ Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170725215053.135586-1-mka@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.