aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-13powerpc/boot: Use CONFIG_PPC_POWERNV to compile OPAL supportCédric Le Goater2-2/+2
CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is used to compile support for other platforms such as Microwatt. There is no need for OPAL calls on these. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-13powerpc: Set max_mapnr correctlyChristophe Leroy1-1/+1
max_mapnr is used by virt_addr_valid() to check if a linear address is valid. It must only include lowmem PFNs, like other architectures. Problem detected on a system with 1G mem (Only 768M are mapped), with CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/77d99037782ac4b3c3b0124fc4ae80ce7b760b05.1634035228.git.christophe.leroy@csgroup.eu
2021-10-13KVM: PPC: Book3S HV: H_ENTER filter out reserved HPTE[B] valueNicholas Piggin2-0/+13
The HPTE B field is a 2-bit field with values 0b10 and 0b11 reserved. This field is also taken from the HPTE and used when KVM executes TLBIEs to set the B field of those instructions. Disallow the guest setting B to a reserved value with H_ENTER by rejecting it. This is the same approach already taken for rejecting reserved (unsupported) LLP values. This prevents the guest from being able to induce the host to execute TLBIE with reserved values, which is not known to be a problem with current processors but in theory it could prevent the TLBIE from working correctly in a future processor. Signed-off-by: Nicholas Piggin <[email protected]> Reviewed-by: Fabiano Rosas <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-12powerpc/perf: Expose instruction and data address registers as part of ↵Athira Rajeev2-4/+11
extended regs Patch adds support to include Sampled Instruction Address Register (SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended registers. Update the definition of PERF_REG_PMU_MASK_300/31 and PERF_REG_EXTENDED_MAX to include these SPR's. Signed-off-by: Athira Rajeev <[email protected]> Reviewed-by: Daniel Axtens <[email protected]> Reviewed-by: Kajol Jain<[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-12powerpc/perf: Refactor the code definition of perf reg extended maskAthira Rajeev1-8/+13
PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask value for extended registers. Current definition of these mask values uses hex constant and does not use registers by name, making it less readable. Patch refactor the macro values by or'ing together the actual register value constants. Also include PERF_REG_EXTENDED_MAX as part of enum definition. Suggested-by: Michael Ellerman <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Reviewed-by: Kajol Jain<[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/pseries/cpuhp: remove obsolete comment from pseries_cpu_dieNathan Lynch1-5/+0
This comment likely refers to the obsolete DLPAR workflow where some resource state transitions were driven more directly from user space utilities, but it also seems to contradict itself: "Change isolate state to Isolate [...]" is at odds with the preceding sentences, and it does not relate at all to the code that follows. Remove it to prevent confusion. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Daniel Henrique Barboza <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/pseries/cpuhp: delete add/remove_by_count codeNathan Lynch1-216/+2
The core DLPAR code supports two actions (add and remove) and three subtypes of action: * By DRC index: the action is attempted on a single specified resource. This is the usual case for processors. * By indexed count: the action is attempted on a range of resources beginning at the specified index. This is implemented only by the memory DLPAR code. * By count: the lower layer (CPU or memory) is responsible for locating the specified number of resources to which the action can be applied. I cannot find any evidence of the "by count" subtype being used by drmgr or qemu for processors. And when I try to exercise this code, the add case does not work: $ ppc64_cpu --smt ; nproc SMT=8 24 $ printf "cpu remove count 2" > /sys/kernel/dlpar $ nproc 8 $ printf "cpu add count 2" > /sys/kernel/dlpar -bash: printf: write error: Invalid argument $ dmesg | tail -2 pseries-hotplug-cpu: Failed to find enough CPUs (1 of 2) to add dlpar: Could not handle DLPAR request "cpu add count 2" $ nproc 8 $ drmgr -c cpu -a -q 2 # this uses the by-index method Validating CPU DLPAR capability...yes. CPU 1 CPU 17 $ nproc 24 This is because find_drc_info_cpus_to_add() does not increment drc_index appropriately during its search. This is not hard to fix. But the _by_count() functions also have the property that they attempt to roll back all prior operations if the entire request cannot be satisfied, even though the rollback itself can encounter errors. It's not possible to provide transaction-like behavior at this level, and it's undesirable to have code that can only pretend to do that. Any users of these functions cannot know what the state of the system is in the error case. And the error paths are, to my knowledge, impossible to test without adding custom error injection code. Summary: * This code has not worked reliably since its introduction. * There is no evidence that it is used. * It contains questionable rollback behaviors in error paths which are difficult to test. So let's remove it. Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality") Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality") Fixes: b015f6bc9547 ("powerpc/pseries: Add cpu DLPAR support for drc-info property") Signed-off-by: Nathan Lynch <[email protected]> Tested-by: Daniel Henrique Barboza <[email protected]> Reviewed-by: Daniel Henrique Barboza <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/cpuhp: BUG -> WARN conversion in offline pathNathan Lynch1-1/+2
If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU that isn't marked hotpluggable, we can emit a warning and return an appropriate error instead of crashing. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Daniel Henrique Barboza <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/pseries/cpuhp: cache node correctionsNathan Lynch1-4/+71
On pseries, cache nodes in the device tree can be added and removed by the CPU DLPAR code as well as the partition migration (mobility) code. PowerVM partitions in dedicated processor mode typically have L2 and L3 cache nodes. The CPU DLPAR code has the following shortcomings: * Cache nodes returned as siblings of a new CPU node by ibm,configure-connector are silently discarded; only the CPU node is added to the device tree. * Cache nodes which become unreferenced in the processor removal path are not removed from the device tree. This can lead to duplicate nodes when the post-migration device tree update code replaces cache nodes. This is long-standing behavior. Presumably it has gone mostly unnoticed because the two bugs have the property of obscuring each other in common simple scenarios (e.g. remove a CPU and add it back). Likely you'd notice only if you cared to inspect the device tree or the sysfs cacheinfo information. Booted with two processors: $ pwd /sys/firmware/devicetree/base/cpus $ ls -1d */ l2-cache@2010/ l2-cache@2011/ l3-cache@3110/ l3-cache@3111/ PowerPC,POWER9@0/ PowerPC,POWER9@8/ $ lsprop */l2-cache l2-cache@2010/l2-cache 00003110 (12560) l2-cache@2011/l2-cache 00003111 (12561) PowerPC,POWER9@0/l2-cache 00002010 (8208) PowerPC,POWER9@8/l2-cache 00002011 (8209) $ ls /sys/devices/system/cpu/cpu0/cache/ index0 index1 index2 index3 After DLPAR-adding PowerPC,POWER9@10, we see that its associated cache nodes are absent, its threads' L2+L3 cacheinfo is unpopulated, and it is missing a cache level in its sched domain hierarchy: $ ls -1d */ l2-cache@2010/ l2-cache@2011/ l3-cache@3110/ l3-cache@3111/ PowerPC,POWER9@0/ PowerPC,POWER9@10/ PowerPC,POWER9@8/ $ lsprop PowerPC\,POWER9@10/l2-cache PowerPC,POWER9@10/l2-cache 00002012 (8210) $ ls /sys/devices/system/cpu/cpu16/cache/ index0 index1 $ grep . /sys/kernel/debug/sched/domains/cpu{0,8,16}/domain*/name /sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT /sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE /sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE /sys/kernel/debug/sched/domains/cpu8/domain0/name:SMT /sys/kernel/debug/sched/domains/cpu8/domain1/name:CACHE /sys/kernel/debug/sched/domains/cpu8/domain2/name:DIE /sys/kernel/debug/sched/domains/cpu16/domain0/name:SMT /sys/kernel/debug/sched/domains/cpu16/domain1/name:DIE When removing PowerPC,POWER9@8, we see that its cache nodes are left behind: $ ls -1d */ l2-cache@2010/ l2-cache@2011/ l3-cache@3110/ l3-cache@3111/ PowerPC,POWER9@0/ When DLPAR is combined with VM migration, we can get duplicate nodes. E.g. removing one processor, then migrating, adding a processor, and then migrating again can result in warnings from the OF core during post-migration device tree updates: Duplicate name in cpus, renamed to "l2-cache@2011#1" Duplicate name in cpus, renamed to "l3-cache@3111#1" and nodes with duplicated phandles in the tree, making lookup behavior unpredictable: $ lsprop l[23]-cache@*/ibm,phandle l2-cache@2010/ibm,phandle 00002010 (8208) l2-cache@2011#1/ibm,phandle 00002011 (8209) l2-cache@2011/ibm,phandle 00002011 (8209) l3-cache@3110/ibm,phandle 00003110 (12560) l3-cache@3111#1/ibm,phandle 00003111 (12561) l3-cache@3111/ibm,phandle 00003111 (12561) Address these issues by: * Correctly processing siblings of the node returned from dlpar_configure_connector(). * Removing cache nodes in the CPU remove path when it can be determined that they are not associated with other CPUs or caches. Use the of_changeset API in both cases, which allows us to keep the error handling in this code from becoming more complex while ensuring that the device tree cannot become inconsistent. Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality") Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality") Signed-off-by: Nathan Lynch <[email protected]> Tested-by: Daniel Henrique Barboza <[email protected]> Reviewed-by: Daniel Henrique Barboza <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/paravirt: correct preempt debug splat in vcpu_is_preempted()Nathan Lynch1-1/+17
vcpu_is_preempted() can be used outside of preempt-disabled critical sections, yielding warnings such as: BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/185 caller is rwsem_spin_on_owner+0x1cc/0x2d0 CPU: 1 PID: 185 Comm: systemd-udevd Not tainted 5.15.0-rc2+ #33 Call Trace: [c000000012907ac0] [c000000000aa30a8] dump_stack_lvl+0xac/0x108 (unreliable) [c000000012907b00] [c000000001371f70] check_preemption_disabled+0x150/0x160 [c000000012907b90] [c0000000001e0e8c] rwsem_spin_on_owner+0x1cc/0x2d0 [c000000012907be0] [c0000000001e1408] rwsem_down_write_slowpath+0x478/0x9a0 [c000000012907ca0] [c000000000576cf4] filename_create+0x94/0x1e0 [c000000012907d10] [c00000000057ac08] do_symlinkat+0x68/0x1a0 [c000000012907d70] [c00000000057ae18] sys_symlink+0x58/0x70 [c000000012907da0] [c00000000002e448] system_call_exception+0x198/0x3c0 [c000000012907e10] [c00000000000c54c] system_call_common+0xec/0x250 The result of vcpu_is_preempted() is always used speculatively, and the function does not access per-cpu resources in a (Linux) preempt-unsafe way. Use raw_smp_processor_id() to avoid such warnings, adding explanatory comments. Fixes: ca3f969dcb11 ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()") Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/paravirt: vcpu_is_preempted() commentaryNathan Lynch1-4/+18
Add comments more clearly documenting that this function determines whether hypervisor-level preemption of the VM has occurred. Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc: fix unbalanced node refcount in check_kvm_guest()Nathan Lynch1-4/+3
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it returns without performing a matching put for the lookup, leaving the node's reference count elevated. Add the necessary call to of_node_put(), rearranging the code slightly to avoid repetition or goto. Fixes: 107c55005fbd ("powerpc/pseries: Add KVM guest doorbell restrictions") Signed-off-by: Nathan Lynch <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Reviewed-by: Tyrel Datwyler <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09video: fbdev: chipsfb: use memset_io() instead of memset()Christophe Leroy1-1/+1
While investigating a lockup at startup on Powerbook 3400C, it was identified that the fbdev driver generates alignment exception at startup: --- interrupt: 600 at memset+0x60/0xc0 NIP: c0021414 LR: c03fc49c CTR: 00007fff REGS: ca021c10 TRAP: 0600 Tainted: G W (5.14.2-pmac-00727-g12a41fa69492) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 44008442 XER: 20000100 DAR: cab80020 DSISR: 00017c07 GPR00: 00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004 GPR08: 00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000 GPR24: 00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c NIP [c0021414] memset+0x60/0xc0 LR [c03fc49c] chipsfb_pci_init+0x160/0x580 --- interrupt: 600 [ca021cd0] [c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable) [ca021d20] [c03a3a70] pci_device_probe+0xf8/0x1b8 [ca021d50] [c043d584] really_probe.part.0+0xac/0x388 [ca021d70] [c043d914] __driver_probe_device+0xb4/0x170 [ca021d90] [c043da18] driver_probe_device+0x48/0x144 [ca021dc0] [c043e318] __driver_attach+0x11c/0x1c4 [ca021de0] [c043ad30] bus_for_each_dev+0x88/0xf0 [ca021e10] [c043c724] bus_add_driver+0x190/0x22c [ca021e40] [c043ee94] driver_register+0x9c/0x170 [ca021e60] [c0006c28] do_one_initcall+0x54/0x1ec [ca021ed0] [c08246e4] kernel_init_freeable+0x1c0/0x270 [ca021f10] [c0006fdc] kernel_init+0x28/0x11c [ca021f30] [c0017148] ret_from_kernel_thread+0x14/0x1c Instruction dump: 7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa 7d2a01a4 4c00012c 4bfffe88 0fe00000 <4bfffe80> 9421fff0 38210010 48001970 This is due to 'dcbz' instruction being used on non-cached memory. 'dcbz' instruction is used by memset() to zeroize a complete cacheline at once, and memset() is not expected to be used on non cached memory. When performing a 'sparse' check on fbdev driver, it also appears that the use of memset() is unexpected: drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces) drivers/video/fbdev/chipsfb.c:334:17: expected void * drivers/video/fbdev/chipsfb.c:334:17: got char [noderef] __iomem *screen_base drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576 Use fb_memset() instead of memset(). fb_memset() is defined as memset_io() for powerpc. Fixes: 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK") Reported-by: Stan Johnson <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu
2021-10-09powerpc/powernv/dump: Fix typo in commentVasant Hegde1-1/+1
Signed-off-by: Vasant Hegde <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/asm: Remove UPD_CONSTR after GCC 4.9 removalNick Desaulniers5-13/+11
UPD_CONSTR was previously a preprocessor define for an old GCC 4.9 inline asm bug with m<> constraints. Fixes: 6563139d90ad ("powerpc: remove GCC version check for UPD_CONSTR") Suggested-by: Nathan Chancellor <[email protected]> Suggested-by: Christophe Leroy <[email protected]> Suggested-by: Michael Ellerman <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/mem: Fix arch/powerpc/mm/mem.c:53:12: error: no previous prototype ↵Christophe Leroy1-1/+1
for 'create_section_mapping' Commit 8e11d62e2e87 ("powerpc/mem: Add back missing header to fix 'no previous prototype' error") was supposed to fix the problem, but in the meantime commit a927bd6ba952 ("mm: fix phys_to_target_node() and* memory_add_physaddr_to_nid() exports") moved create_section_mapping() prototype from asm/sparsemem.h to asm/mmzone.h Fixes: 8e11d62e2e87 ("powerpc/mem: Add back missing header to fix 'no previous prototype' error") Reported-by: kernel test robot <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu
2021-10-09powerpc: Drop superfluous pci_dev_is_added() callsNiklas Schnelle2-8/+1
On powerpc, pci_dev_is_added() is called as part of SR-IOV fixups that are done under pcibios_add_device() which in turn is only called in pci_device_add() whih is called when a PCI device is scanned. pci_dev_assign_added() is called in pci_bus_add_device() which is only called after scanning the device. Thus pci_dev_is_added() is always false and can be dropped. Signed-off-by: Niklas Schnelle <[email protected]> Reviewed-by: Bjorn Helgaas <[email protected]> Reviewed-by: Oliver O'Halloran <[email protected]> [mpe: Tweak change log slightly to reflect Oliver's comments] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/powermac: Remove stale declaration of pmac_mdChristophe Leroy1-2/+0
pmac_md doesn't exist anymore, remove stall declaration. Fixes: e8222502ee61 ("[PATCH] powerpc: Kill _machine and hard-coded platform numbers") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/b2e52934e5a500f149e6d94db3cfa0569bc35081.1630657402.git.christophe.leroy@csgroup.eu
2021-10-09powerpc: Remove unused prototype for of_show_percpuinfoDaniel Axtens1-1/+0
commit 6d7f58b04d82 ("[PATCH] powerpc: Some minor cleanups to setup_32.c") removed of_show_percpuinfo but didn't remove the prototype. Remove it. Fixes: 6d7f58b04d82 ("[PATCH] powerpc: Some minor cleanups to setup_32.c") Signed-off-by: Daniel Axtens <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/476: Fix sparse reportChristophe Leroy1-2/+2
Fix sparse errors: arch/powerpc/platforms/44x/ppc476.c:236:17: warning: cast removes address space '__iomem' of expression arch/powerpc/platforms/44x/ppc476.c:241:34: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/platforms/44x/ppc476.c:241:34: expected void const volatile [noderef] __iomem *addr arch/powerpc/platforms/44x/ppc476.c:241:34: got unsigned char [usertype] * arch/powerpc/platforms/44x/ppc476.c:243:17: warning: incorrect type in argument 1 (different address spaces) arch/powerpc/platforms/44x/ppc476.c:243:17: expected void volatile [noderef] __iomem *addr arch/powerpc/platforms/44x/ppc476.c:243:17: got unsigned char [usertype] *[assigned] fpga Mark 'fpga' pointer as __iomem. Fixes: ab9a4183fddf ("powerpc: Update currituck pci/usb fixup for new board revision") Reported-by: kernel test robot <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Alistair Popple <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/aa6055769b92a5d8685b8d0adab99c48a0b0ef4b.1631956926.git.christophe.leroy@csgroup.eu
2021-10-09powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=nXiaoming Ni3-7/+13
When CONFIG_SMP=y, timebase synchronization is required when the second kernel is started. arch/powerpc/kernel/smp.c: int __cpu_up(unsigned int cpu, struct task_struct *tidle) { ... if (smp_ops->give_timebase) smp_ops->give_timebase(); ... } void start_secondary(void *unused) { ... if (smp_ops->take_timebase) smp_ops->take_timebase(); ... } When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n, smp_85xx_ops.give_timebase is NULL, smp_85xx_ops.take_timebase is NULL, As a result, the timebase is not synchronized. Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU. Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations") Cc: [email protected] # v4.6+ Signed-off-by: Xiaoming Ni <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be foundXiaoming Ni1-2/+1
When the field described in mpc85xx_smp_guts_ids[] is not configured in dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts" variable. As a result, the oops is triggered when mpc85xx_freeze_time_base() is executed. Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations") Cc: [email protected] # v4.6+ Signed-off-by: Xiaoming Ni <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-09powerps/pseries/dma: Add support for 2M IOMMU page sizeAlexey Kardashevskiy1-5/+5
The upcoming PAPR spec adds a 2M page size, bit 23 right after 16G page size in the "ibm,query-pe-dma-window" call. This adds support for the new page size. Since the new page size is out of sorted order, this changes the loop to not assume that shift[] is sorted. This has now been tested and is known to work on a pre-release version of phyp. Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: Leonardo Bras <[email protected]> Reviewed-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-09-19Linux 5.15-rc2Linus Torvalds1-1/+1
2021-09-19pci_iounmap'2: Electric Boogaloo: try to make sense of it allLinus Torvalds2-23/+46
Nathan Chancellor reports that the recent change to pci_iounmap in commit 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") causes build errors on arm64. It took me about two hours to convince myself that I think I know what the logic of that mess of #ifdef's in the <asm-generic/io.h> header file really aim to do, and rewrite it to be easier to follow. Famous last words. Anyway, the code has now been lifted from that grotty header file into lib/pci_iomap.c, and has fairly extensive comments about what the logic is. It also avoids indirecting through another confusing (and badly named) helper function that has other preprocessor config conditionals. Let's see what odd architecture did something else strange in this area to break things. But my arm64 cross build is clean. Fixes: 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") Reported-by: Nathan Chancellor <[email protected]> Cc: Helge Deller <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Ulrich Teichert <[email protected]> Cc: James Bottomley <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-19Merge tag 'x86_urgent_for_v5.15_rc2' of ↵Linus Torvalds5-15/+47
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Prevent a infinite loop in the MCE recovery on return to user space, which was caused by a second MCE queueing work for the same page and thereby creating a circular work list. - Make kern_addr_valid() handle existing PMD entries, which are marked not present in the higher level page table, correctly instead of blindly dereferencing them. - Pass a valid address to sanitize_phys(). This was caused by the mixture of inclusive and exclusive ranges. memtype_reserve() expect 'end' being exclusive, but sanitize_phys() wants it inclusive. This worked so far, but with end being the end of the physical address space the fail is exposed. - Increase the maximum supported GPIO numbers for 64bit. Newer SoCs exceed the previous maximum. * tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Avoid infinite loop for copy from user recovery x86/mm: Fix kern_addr_valid() to cope with existing but not present entries x86/platform: Increase maximum GPIO number for X86_64 x86/pat: Pass valid address to sanitize_phys()
2021-09-19Merge tag 'perf-urgent-2021-09-19' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Thomas Gleixner: "A single fix for the perf core where a value read with READ_ONCE() was checked and then reread which makes all the checks invalid. Reuse the already read value instead" * tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: events: Reuse value read using READ_ONCE instead of re-reading it
2021-09-19Merge tag 'locking-urgent-2021-09-19' of ↵Linus Torvalds1-20/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of updates for the RT specific reader/writer locking base code: - Make the fast path reader ordering guarantees correct. - Code reshuffling to make the fix simpler" [ This plays ugly games with atomic_add_return_release() because we don't have a plain atomic_add_release(), and should really be cleaned up, I think - Linus ] * tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwbase: Take care of ordering guarantee for fastpath reader locking/rwbase: Extract __rwbase_write_trylock() locking/rwbase: Properly match set_and_save_state() to restore_state()
2021-09-19Merge tag 'powerpc-5.15-2' of ↵Linus Torvalds7-55/+159
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction is active, on Power9 or later. - Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode. - Fix crashes when handling machine checks in LPARs using the Hash MMU. - Partly revert a recent change to our XICS interrupt controller code, which broke the recently added Microwatt support. Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley, Nicholas Piggin. * tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xics: Set the IRQ chip data for the ICS native backend powerpc/mce: Fix access error in mce handler KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers powerpc/64s: system call rfscv workaround for TM bugs selftests/powerpc: Add scv versions of the basic TM syscall tests powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
2021-09-19Merge tag 'kbuild-fixes-v5.15' of ↵Linus Torvalds6-20/+27
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix bugs in checkkconfigsymbols.py - Fix missing sys import in gen_compile_commands.py - Fix missing FORCE warning for ARCH=sh builds - Fix -Wignored-optimization-argument warnings for Clang builds - Turn -Wignored-optimization-argument into an error in order to stop building instead of sprinkling warnings * tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS x86/build: Do not add -falign flags unconditionally for clang kbuild: Fix comment typo in scripts/Makefile.modpost sh: Add missing FORCE prerequisites in Makefile gen_compile_commands: fix missing 'sys' package checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
2021-09-19Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of ↵Linus Torvalds7-51/+100
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix ip display in 'perf script' when output type != attr->type. - Ignore deprecation warning when using libbpf'sg btf__get_from_id(), fixing the build with libbpf v0.6+. - Make use of FD() robust in libperf, fixing a segfault with 'perf stat --iostat list'. - Initialize addr_location:srcline pointer to NULL when resolving callchain addresses. - Fix fused instruction logic for assembly functions in 'perf annotate'. * tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id() libperf evsel: Make use of FD robust. perf machine: Initialize srcline string member in add_location struct perf script: Fix ip display when type != attr->type perf annotate: Fix fused instr logic for assembly functions
2021-09-19dmascc: use proper 'virt_to_bus()' rather than casting to 'int'Linus Torvalds1-3/+3
The old dmascc driver depends on the legacy ISA_DMA_API, and blindly just casts the kernel virtual address to 'int' for set_dma_addr(). That works only incidentally, and because the high bits of the address will be ignored anyway. And on 64-bit architectures it causes warnings. Admittedly, 64-bit architectures with ISA are basically dead - I think the only example of this is alpha, and nobody would ever use the dmascc driver there. But hey, the fix is easy enough, the end result is cleaner, and it's yet another configuration that now builds without warnings. If somebody actually uses this driver on an alpha and this fixes it for you, please email me. Because that is just incredibly bizarre. Signed-off-by: Linus Torvalds <[email protected]>
2021-09-19alpha: enable GENERIC_PCI_IOMAP unconditionallyLinus Torvalds1-1/+1
With the previous commit (9caea0007601: "parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") we can now enable GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we will just get the nice empty helper functions that allow mixed-bus drivers to build. Example driver: the old 3com/3c59x.c driver works with either the PCI or the EISA version of the 3x59x card, but wouldn't build in an EISA-only configuration because of missing pci_iomap() and pci_iounmap() dummy wrappers. Most of the other PCI infrastructure just becomes empty wrappers even without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap functionality shouldn't do the same, but this works. Cc: Ulrich Teichert <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-19parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabledHelge Deller3-11/+6
Linus noticed odd declaration rules for pci_iounmap() in iomap.h and pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or GENERIC_IOMAP when CONFIG_PCI was disabled. Testing on parisc seems to indicate that we need pci_iounmap() only when CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved cleanly into pci_iomap.h in sync with the declarations of pci_iomap(). Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/ Signed-off-by: Helge Deller <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Fixes: 97a29d59fc22 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional") Cc: Arnd Bergmann <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Ulrich Teichert <[email protected]> Cc: James Bottomley <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-19Revert "drm/vc4: hdmi: Remove drm_encoder->crtc usage"Linus Torvalds1-27/+13
This reverts commit 27da370e0fb343a0baf308f503bb3e5dcdfe3362. Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and confirmed that a revert fixed the problem. Revert the problematic commit until fixed. Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/ Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/ Reported-and-tested-by: Sudip Mukherjee <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Emma Anholt <[email protected]> Cc: Dave Airlie <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-19Revert drm/vc4 hdmi runtime PM changesLinus Torvalds1-34/+10
This reverts commits 9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect") 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm") as Michael Stapelberg reports that the new runtime PM changes cause his Raspberry Pi 3 to hang on boot, probably due to interactions with other changes in the DRM tree (because a bisect points to the merge in commit e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm"). Revert these two commits until it's been resolved. Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/ Reported-and-tested-by: Michael Stapelberg <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Dave Stevenson <[email protected]> Cc: Dave Airlie <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-19kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGSNathan Chancellor1-0/+5
Similar to commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS"). Clang ignores certain GCC flags that it has not implemented, only emitting a warning: $ echo | clang -fsyntax-only -falign-jumps -x c - clang-14: warning: optimization flag '-falign-jumps' is not supported [-Wignored-optimization-argument] When one of these flags gets added to KBUILD_CFLAGS unconditionally, all subsequent cc-{disable-warning,option} calls fail because -Werror was added to these invocations to turn the above warning and the equivalent -W flag warning into errors. To catch the presence of these flags earlier, turn -Wignored-optimization-argument into an error so that the flags can either be implemented or ignored via cc-option and there are no more weird errors. Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2021-09-19x86/build: Do not add -falign flags unconditionally for clangNathan Chancellor1-3/+9
clang does not support -falign-jumps and only recently gained support for -falign-loops. When one of the configuration options that adds these flags is enabled, clang warns and all cc-{disable-warning,option} that follow fail because -Werror gets added to test for the presence of this warning: clang-14: warning: optimization flag '-falign-jumps=0' is not supported [-Wignored-optimization-argument] To resolve this, add a couple of cc-option calls when building with clang; gcc has supported these options since 3.2 so there is no point in testing for their support. -falign-functions was implemented in clang-7, -falign-loops was implemented in clang-14, and -falign-jumps has not been implemented yet. Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected]/ Reported-by: kernel test robot <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Acked-by: Borislav Petkov <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2021-09-19kbuild: Fix comment typo in scripts/Makefile.modpostRamji Jiyani1-1/+1
Change comment "create one <module>.mod.c file pr. module" to "create one <module>.mod.c file per module" Signed-off-by: Ramji Jiyani <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2021-09-19sh: Add missing FORCE prerequisites in MakefileGeert Uytterhoeven1-8/+8
make: arch/sh/boot/Makefile:87: FORCE prerequisite is missing Add the missing FORCE prerequisites for all build targets identified by "make help". Fixes: e1f86d7b4b2a5213 ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2021-09-19gen_compile_commands: fix missing 'sys' packageKortan1-0/+1
We need to import the 'sys' package since the script has called sys.exit() method. Fixes: 6ad7cbc01527 ("Makefile: Add clang-tidy and static analyzer support to makefile") Signed-off-by: Kortan <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2021-09-19checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_fileAriel Marcovitch1-8/+0
When parsing Kconfig files to find symbol definitions and references, lines after a 'help' line are skipped until a new config definition starts. However, Kconfig statements can actually be after a help section, as long as these have shallower indentation. These are skipped by the parser. This means that symbols referenced in this kind of statements are ignored by this function and thus are not considered undefined references in case the symbol is not defined. Remove the 'skip' logic entirely, as it is not needed if we just use the STMT regex to find the end of help lines. However, this means that keywords that appear as part of the help message (i.e. with the same indentation as the help lines) it will be considered as a reference/definition. This can happen now as well, but only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL after it, which probably means that someone referenced a config in the help so it seems like a bonus :) The real solution is to keep track of the indentation when a the first help line in encountered and then handle DEF and STMT lines only if the indentation is shallower. Signed-off-by: Ariel Marcovitch <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2021-09-19checkkconfigsymbols.py: Forbid passing 'HEAD' to --commitAriel Marcovitch1-0/+3
As opposed to the --diff option, --commit can get ref names instead of commit hashes. When using the --commit option, the script resets the working directory to the commit before the given ref, by adding '~' to the end of the ref. However, the 'HEAD' ref is relative, and so when the working directory is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the script resets to 'HEAD' it actually stays in the same commit. In this case, the script won't report any cases because there is no diff between the cases of the two refs. Prevent the user from using HEAD refs. A better solution might be to resolve the refs before doing the reset, but for now just disallow such refs. Signed-off-by: Ariel Marcovitch <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2021-09-18alpha: move __udiv_qrnnd library function to arch/alpha/lib/Linus Torvalds5-3/+5
We already had the implementation for __udiv_qrnnd (unsigned divide for multi-precision arithmetic) as part of the alpha math emulation code. But you can disable the math emulation code - even if you shouldn't - and then the MPI code that actually wants this functionality (and is needed by various crypto functions) will fail to build. So move the extended-precision divide code to be a regular library function, just like all the regular division code is. That way ie is available regardless of math-emulation. Signed-off-by: Linus Torvalds <[email protected]>
2021-09-18alpha: mark 'Jensen' platform as no longer brokenLinus Torvalds2-6/+5
Ok, it almost certainly is still broken on actual hardware, but the immediate reason for it having been marked BROKEN was a build error that is fixed by just making sure the low-level IO header file is included sufficiently early that the __EXTERN_INLINE hackery takes effect. This was marked broken back in 2017 by commit 1883c9f49d02 ("alpha: mark jensen as broken"), but Ulrich Teichert made me look at it as part of my cross-build work to make sure -Werror actually does the right thing. There are lots of alpha configurations that do not build cleanly, but now it's no longer because Jensen wouldn't be buildable. That said, because the Jensen platform doesn't force PCI to be enabled (Jensen only had EISA), it ends up being somewhat interesting as a source of odd configs. Reported-by: Ulrich Teichert <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-18perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()Andrii Nakryiko1-0/+3
Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as a weak function, presumably to dynamically link against old version of libbpf shared library. Unfortunately this causes compilation warning when perf is compiled against libbpf v0.6+. For now, just ignore deprecation warning, but there might be a better solution, depending on perf's needs. Signed-off-by: Andrii Nakryiko <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: [email protected] LPU-Reference: [email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-18libperf evsel: Make use of FD robust.Ian Rogers1-23/+41
FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-18perf machine: Initialize srcline string member in add_location structMichael Petlan1-0/+1
It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06a509e, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06a509e ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-18perf script: Fix ip display when type != attr->typeAdrian Hunter1-11/+13
set_print_ip_opts() was not being called when type != attr->type because there is not a one-to-one relationship between output types and attr->type. That resulted in ip not printing. The attr_type() function is removed, and the match of attr->type to output type is corrected. Example on ADL using taskset to select an atom cpu: # perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ] Before: # perf script | head taskset 428 [-01] 10394.179041: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179043: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179044: 11 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179045: 407 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179046: 16789 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179052: 676300 cpu_atom/cpu-cycles/: uname 428 [-01] 10394.179278: 4079859 cpu_atom/cpu-cycles/: After: # perf script | head taskset 428 10394.179041: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179043: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179044: 11 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179045: 407 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179046: 16789 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179052: 676300 cpu_atom/cpu-cycles/: 7f829ef73800 cfree+0x0 (/lib/libc-2.32.so) uname 428 10394.179278: 4079859 cpu_atom/cpu-cycles/: ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms]) Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Kan Liang <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-09-18perf annotate: Fix fused instr logic for assembly functionsRavi Bangoria3-17/+42
Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions with branch instructions, and thus perf annotate highlight such valid pairs as fused. When annotated with source, perf uses struct disasm_line to contain either source or instruction line from objdump output. Usually, a C statement generates multiple instructions which include such cmp/test/ALU + branch instruction pairs. But in case of assembly function, each individual assembly source line generate one instruction. The 'perf annotate' instruction fusion logic assumes the previous disasm_line as the previous instruction line, which is wrong because, for assembly function, previous disasm_line contains source line. And thus perf fails to highlight valid fused instruction pairs for assembly functions. Fix it by searching backward until we find an instruction line and consider that disasm_line as fused with current branch instruction. Before: │ cmpq %rcx, RIP+8(%rsp) 0.00 │ cmp %rcx,0x88(%rsp) │ je .Lerror_bad_iret <--- Source line 0.14 │ ┌──je b4 <--- Instruction line │ │movl %ecx, %eax After: │ cmpq %rcx, RIP+8(%rsp) 0.00 │ ┌──cmp %rcx,0x88(%rsp) │ │je .Lerror_bad_iret 0.14 │ ├──je b4 │ │movl %ecx, %eax Reviewed-by: Jin Yao <[email protected]> Signed-off-by: Ravi Bangoria <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https //lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.